About American Heavy Moving & RiggingRigging Innovative Technology & Techniques SAVING TIME, SAVING...
Transcript of About American Heavy Moving & RiggingRigging Innovative Technology & Techniques SAVING TIME, SAVING...
-
We have perfected the art of safe & efficient heavy haul
Jacking & Rigging – exclusively used in the critical load and transfer of cargo for greater control and safety
Alpha 1 Trailers – our own design, these trailers provide state-of-the-art, high speed, dual-lane transportation of payloads up to 700,000 lbs.
DualMAX Trailers – These dual-lane, multi-axle transport vehicles have the strongest and most torsion resistant chassis in the market
For over thirty years, American Heavy Moving & Rigging has been family owned and serves petrochemical, industrial and power sectors.
We specialize in the transportation of heavy and oversize cargo including transformers, modules, generators turbines, and vessels. We transport more transformers than any
other heavy haul company due to our fleet of trailers with custom, multi-configurable axles.
Our personnel have extensive experience in trans-loading operations, on-site rigging and setting of cargo, and the load transfer of drill rigs, bridges, buildings, and other projects.
We operate under the authority of DOT 10448914, MCC 662864, CA 26916, IFTA, CALBIT and port clean truck. Hold California
contractor class B and C-21 licenses and member of CTA, IASM, RICA, and SC&RA.
11532 East End Avenue, Chino, CA 91710 1313 State Street, Mound City, MO 64470
909.590.5662 American-‐Heavy-‐[email protected]
We Can Move It!
About American Heavy Moving & Rigging
Innovative Technology & Techniques
SAVING TIME, SAVING MONEY
We have perfected the art of safe & efficient heavy haul
Jacking & Rigging – exclusively used in the critical load and transfer of cargo for greater control and safety
Alpha 1 Trailers – our own design, these trailers provide state-of-the-art, high speed, dual-lane transportation of payloads up to 700,000 lbs.
DualMAX Trailers – These dual-lane, multi-axle transport vehicles have the strongest and most torsion resistant chassis in the market
For over thirty years, American Heavy Moving & Rigging has been family owned and serves petrochemical, industrial and power sectors.
We specialize in the transportation of heavy and oversize cargo including transformers, modules, generators turbines, and vessels. We transport more transformers than any
other heavy haul company due to our fleet of trailers with custom, multi-configurable axles.
Our personnel have extensive experience in trans-loading operations, on-site rigging and setting of cargo, and the load transfer of drill rigs, bridges, buildings, and other projects.
We operate under the authority of DOT 10448914, MCC 662864, CA 26916, IFTA, CALBIT and port clean truck. Hold California
contractor class B and C-21 licenses and member of CTA, IASM, RICA, and SC&RA.
1391 E. Phillips Boulevard, Pomona, CA 91766 22634 Mo-118, Craig, MO 64437
909-469-2827info@americanheavymoving.comwww.americanheavymoving.com
We Can Move It!
About American Heavy Moving & Rigging
Innovative Technology & Techniques
SAVING TIME, SAVING MONEY
We have perfected the art of safe & efficient heavy haul
Jacking & Rigging – exclusively used in the critical load and transfer of cargo for greater control and safety
Alpha 1 Trailers – our own design, these trailers provide state-of-the-art, high speed, dual-lane transportation of payloads up to 700,000 lbs.
DualMAX Trailers – These dual-lane, multi-axle transport vehicles have the strongest and most torsion resistant chassis in the market
For over thirty years, American Heavy Moving & Rigging has been family owned and serves petrochemical, industrial and power sectors.
We specialize in the transportation of heavy and oversize cargo including transformers, modules, generators turbines, and vessels. We transport more transformers than any
other heavy haul company due to our fleet of trailers with custom, multi-configurable axles.
Our personnel have extensive experience in trans-loading operations, on-site rigging and setting of cargo, and the load transfer of drill rigs, bridges, buildings, and other projects.
We operate under the authority of DOT 10448914, MCC 662864, CA 26916, IFTA, CALBIT and port clean truck. Hold California
contractor class B and C-21 licenses and member of CTA, IASM, RICA, and SC&RA.
1391 E. Phillips Boulevard, Pomona, CA 91766 22634 Mo-118, Craig, MO 64437
909-469-2827info@americanheavymoving.comwww.americanheavymoving.com
We Can Move It!
About American Heavy Moving & Rigging
Innovative Technology & Techniques
SAVING TIME, SAVING MONEY
-
1
Thorough Preparation
Because of our extensive experience with major utilities and state, county, and municipal governing authorities, we have historical data for many of the numerous facilities and best routes. Physical route review is standard operating procedure to account for any possible changes which results in quick permit turnaround.
Dependable Equipment
We maintain several Kenworth 6 or 8 wheel powerful prime moves, several other class 8 tractors used for pulled loads of our equipment and pushing oversize loads. A typical oversize convoy will have a pilot truck, prime mover, transporter, one, two, or more push tractors, A-frame truck, crew truck as well as a space tractors, tires and parts, if needed.
2
Reliable Deadlines
Through the planning process, proper equipment and experienced crew utilization culminates in a phenomenal success rate that astonishes even industry veterans with our on-time delivery and completion.
Excellent Safety
Crews are trained to applicable rules, regulations and company injury and illness prevention programs (IIPP) resulting in an outstanding record consistent with quality and safety standards.
Established Relationships
Our goal is to exceed customers’ expectations as they appreciate the competitive lump sum quotes without extras, personal and honest service, and frequent communication.
“If it can be moved, we will move it.”
One Stop Shop Loading & Unloading From the point of origin-whether receiving from ships hook, ro-ro vessel, rail car transload or factory/jobsite-to destination, the cargo is handled via the jack and slide method due to its highly economical, efficient and safe nature.
Transportation
We provide numerous transprort options according to cargo magnitude, scope, work locations and route. The most appropriate equipment is always utilized. Moreover, the same crew that loads and unloads, pulls the load and provides self-sufficient, productive support services.
1
Thorough Preparation
Because of our extensive experience with major utilities and state, county, and municipal governing authorities, we have historical data for many of the numerous facilities and best routes. Physical route review is standard operating procedure to account for any possible changes which results in quick permit turnaround.
Dependable Equipment
We maintain several Kenworth 6 or 8 wheel powerful prime moves, several other class 8 tractors used for pulled loads of our equipment and pushing oversize loads. A typical oversize convoy will have a pilot truck, prime mover, transporter, one, two, or more push tractors, A-frame truck, crew truck as well as a space tractors, tires and parts, if needed.
2
Reliable Deadlines
Through the planning process, proper equipment and experienced crew utilization culminates in a phenomenal success rate that astonishes even industry veterans with our on-time delivery and completion.
Excellent Safety
Crews are trained to applicable rules, regulations and company injury and illness prevention programs (IIPP) resulting in an outstanding record consistent with quality and safety standards.
Established Relationships
Our goal is to exceed customers’ expectations as they appreciate the competitive lump sum quotes without extras, personal and honest service, and frequent communication.
“If it can be moved, we will move it.”
One Stop Shop Loading & Unloading From the point of origin-whether receiving from ships hook, ro-ro vessel, rail car transload or factory/jobsite-to destination, the cargo is handled via the jack and slide method due to its highly economical, efficient and safe nature.
Transportation We provide numerous transport options according to cargo magnitude, scope, work locations and route. The most appropriate equipment is always utilized. Moreover, the same crew that loads and unloads, pulls the load and provides self-sufficient, productive support services.