About Air Cooling System…….. - Portable Mini Carboxy Therapy, Hair Removal...
Transcript of About Air Cooling System…….. - Portable Mini Carboxy Therapy, Hair Removal...
About Air Cooling System……..
Expansion Valve
Evaporator Condenser
Warmed
Air
Compressor
Cold Air
Blower
High temp. / High pressure
Low temp. / Low pressure
About Air Cooling System……..
Comparison by other cooling methods
Air Cooling
Koolio
Contact
Cooling
Cryogen
Spray Ice Pack
Cooling Temperature ≤ - 30 ℃ ≤ - 5 ℃ - 3 ∼ 10 ℃ 0 ∼ 10 ℃
Cooling Durability long Mid Short Mid ∼ Short
Availability to use before,
during thermal procedure Yes
No (before)
Yes (during) N/A
Yes (before)
No (during)
Patient’s comfortability High less Poor Less
Cooling Efficacy High Limited Poor Limited
Operator’s Preparation Simple Simple Simple Complicated
A glance at
Koolio ® is an optimal air cooling system designed to cool the skin before, during and after
laser procedures without interfering with the laser beam.
Koolio ® is designed to reduce pain and the risk of thermal injury during or after laser treatment and for temporary topical anesthetic relief for injections.
①
②
③ ④
⑤
① Main Unit
② Control Panel
③ Cooling Therapy Hose
④ Top Shelve
⑤ Connector
⑥ Moving Castor
Description
⑥
Nd:YAG Long pulse and Q-switched system
Laser hair removal system by alexandrite, diode laser and IPL
Thermal procedures for skin rejuvenation
Topical anesthetic relief for injection
Koolio ® is optimal air cooling system for Laser, IPL & Dermatological procedures.
Koolio ® air cooling system minimizes pain and the risk of thermal injury during laser
and IPL treatments and provides temporary anaesthetic relief for
cosmetic injections.
Cooling Before, During and After Unlike other cooling methods, such as contact cooling, cryogen spray, or ice packs the Coolio can cool the epidermis before, during, and after the laser or light energy has been applied without interfering with the beam. The operator can precisely customize the level of skin cooling by choosing between 9 different air flow rates. No expensive consumables, no messy gels or harmful spays, just fresh, cool air.
The best application
Powerful cooling air temperature ( ≤- 41 ℃)
Stand-by mode for immediate using.
Auto defrosting system
Intelligent air flow control system
9 variable cooling fan
Easy targeting extension tip
Special feature
-. Electric shock protection : Class I equipment, Type BF applied part
-. Electrical device class by IEC : Class IIa
-. Input rating : 230VAC±10% , 50/60Hz
-. Power consumption : 2500 VAC in max.
-. Therapy air flow : 9 level (max. 1000ℓ/min.)
-. Power input : 1KW
-. Mode : Start / Stop(pause) / Stand-by / Defrost(Auto)
-. Treatment tube : 2 meter
-. Display : FND Screen with touch button
-. Dimension : W330mm x L750mm x H795mm
-. Weight : approximately 60kg
Specification
Comparison by competitor
Items Cryo-6 Cryo-jet Koolio
Cooling type Air Air Air
Cooling temp. (in evaporator) - 35 ℃ - 35 ℃ - 38 ℃
Loading time to be ‘Ready’ 7 ∼10 min. 15 min. 10 min.
Air flow level 1 ∼ 9 1 ∼ 10 1 ∼ 9
Air volume (max.) 1000 ℓ 1280 ℓ 1300 ℓ
Capacity of compressor - 5/8 HP, 500W 7/8 HP, 600W
Capacity of condenser - 2R x 9L 2R x 11L
Noise level (max.) 80 ㏈ 75 ㏈ 67 ㏈
Mode
Start/Stop o o o
Stand-by o o o
Defrost o o o (auto)
Total weight 60 ㎏ 60 ㎏ 60 ㎏
Treatment tube 180 ㎝ 150 ㎝ 200 ㎝
Accessory
Universal
Adapters
Koolio NEW
Zimmer’s
Koolio Old
Hose Connector
Holding on any hand piece line
for convenient treatment.
Accessory
Hanger
Koolio NEW
Koolio Old
Install it on any of 4 places.
Hang hose for
convenient
using
Accessory
Hanger
Hole for screw.
Hole for Hose.
Hold acrylic
hanger and
laying in screw
on Koolio.
Hang hose in
hole to
convenient using.
Accessory
Tip (Standard).
Tip for ARION
(Quantel Derma)
Tip for LEDA
(Quantel Derma) &
S-11 (Fotona)
Hand-piece tip Compatibility
Our air cooling system to be perfectly matched with Fotona
SP Dynamis (S-11 scanner).
Also match ‘LEDA’ by Quantel derma, ‘Fraxel Dual’ by Solta
and Our products Epicare Plus by DOSIS M&M.