ABLOY HIGH SECURITY ELECTROMECHANICAL LOCKS · ring high security. ... mechanical override to open...
Transcript of ABLOY HIGH SECURITY ELECTROMECHANICAL LOCKS · ring high security. ... mechanical override to open...
2
TECHNICAL DETAILS
Operating voltage 12VAC or12VDC +15%/-10%
Current idle 60 mA, norm. 0.3 A,max 1.2 A
Adjustable delay 2...15 secMonitoring bolt, panic opening
handle, doorTemperature range -20°C...+60°CBolt throw rectangular bolt 20 mm,
double action bolt 10 mmBackset 55, 60, 65, 80, 100 mmForend 20, 24 mmSpindle 9 mm
FINISH
Stainless steel forend, chrome platedlock body.
CYLINDERS
Europrofile DIN type; ABLOY ®
DISKLOCK PRO or other.
PACKAGE
Lock case, control unit, fixing screws, drilling,fitting and wiring instructions.
DIMENSIONSABLOY ® 8120 is a motor lock with rectangular bolt and double action bolt for woodenand metal doors.
APPLICATION
8120 is suitable for use in doors of commercial premises, office and apartment buil-dings, industrial buildings etc. It can be used in emergency exit doors as the door canalways be opened with inside handle.
The lock is ideal for exterior doors (and interior, i.e. compartmentation doors) requi-ring high security.
The lock can be connected to automatic swing door operators and can be controlled bya variety of electrical impulse generating equipment, i.e. card reader, push button, keypad or timer.
Also available: 8130 - same as 8120 but compatible with 22 mm cylinder EL530 - same as 8120 but according to French standard
21,5
10
235
88/93/98/113/133
20
3
55/60/65/80/100
16,5
165
7230
ø8
20/24
MOTOR LOCK ABLOY ® 8120
Lock case dimensions conform toDIN 18250.
Door contact
(optional)
Control unit
12 VAC/12 VDC +15%/-10%
OpenClosed
Trigger bolt in
Door (optional)
Bolt outHandle down
Sabotage loop
Bolt in
Monitoring:
NCNCC
NCC
NCC
NCC
NCC
Door contact(optional)
3
FUNCTION
Bolt is withdrawn by motor and thrown by spring force.
If bolt is thrown by depressing the trigger bolt manually when door is open, bolt iswithdrawn by motor immediately after trigger bolt is released to prevent the abuse oflock.
Bolt and double action bolt are deadlocked when they are thrown to their outermostposition. Double action bolt will be unlocked when bolt is withdrawn.
In the event of power failure bolt is thrown automatically, but there is always mechanicaloverride to open the lock with inside handle or with key.
Door contacts (8951; see page 12) are recommended.
CONTROL SWITCH
Continuous; bolt is retained in lock case and lock remains open.Momentary; bolt is deadlocked after an adjustable delay of 2...15 seconds.
WIRING DIAGRAM
EUROPROFILE DIN CYLINDERSABLOY DISKLOCK PROSingle CY303
Double CY304
Also compatible with other EuroprofileDIN type cylinders and fittings
FITTINGS
ABLOY*),Ruko,IKON,
BEZAULT
ACCESSORIES (please order separately)
Strike Lead cover Cable
4621/4622 8810/8811 EA208 (6m)
EA209 (10m)
ACCORDING TODIN 4102-18/DIN 18250
8120
8130
COMPATIBILITY CHART FOR CYLINDERS, FITTINGS AND ACCESSORIES FIRE APPROVAL
*) For more information please contactAbloy Oy Tampere Factory
4
TECHNICAL DETAILS
Operating voltage 12VDC ±10%Current idle 15 mA, norm. 0.3 A,
max 1.2 ADelay 3 secMonitoring bolt, panic opening
handle, doorTemperature range -20°C...+60°CBolt throw rectangular bolt 20 mm,
double action bolt 10 mmBackset 55, 60, 65, 80, 100 mmForend 20, 24 mmSpindle 9 mm
FINISH
Stainless steel forend, chrome platedlock body.
CYLINDERS
Europrofile DIN type; ABLOY ®
DISKLOCK PRO or other.
PACKAGE
Lock case, fixing screws, drilling, fitting andwiring instructions.
DIMENSIONSABLOY ® 8121 is a motor lock with rectangular bolt and double action bolt for woodenand metal doors.
APPLICATIONS
8121 is suitable for use in the exterior doors (and interior, i.e. compartmentation doors)of commercial premises, office and apartment buildings, industrial buildings etc. It canbe used in emergency exit doors as the door can always be opened with inside handle.
8121 can be controlled by a variety of electrical impulse generating equipment, i.e. cardreader, key pad or timer.
The lock can be connected to automatic swing door operators.
Also available: 8131 - same as 8121 but compatible with 22 mm cylinders.EL522 - same as 8121 but according to French standard.
21,5
10
235
88/93/98/113/133
20
3
55/60/65/80/100
16,5
165
7230
ø8
20/24
Lock case dimensions conform toDIN 18250.
MOTOR LOCK ABLOY ® 8121
5
FUNCTION
8121 is a motor lock with an integrated control unit.
Bolt is withdrawn by motor and thrown by spring force.
Bolt and double action bolt are deadlocked when they are thrown to their outermost position. Double action bolt will be unlocked when bolt is withdrawn.
There is always mechanical override to open the lock with inside handle or with key.
CONTROL SWITCH
Continuous; bolt is retained in lock case and lock remains open.Momentary; bolt is deadlocked after a delay of 3 seconds.
OpenClosed
+12 V DC STAB±10%
Monitoring:
Bolt out
Handle down
Sabotage loop
Bolt in
Trigger bolt in
NC
NC
C
NCC
NC
C
NC
WIRING DIAGRAM
EUROPROFILE DIN CYLINDERSABLOY DISKLOCK PROSingle CY303
Double CY304
Also compatible with other EuroprofileDIN type cylinders and fittings
FITTINGS
ABLOY*), Ruko, IKON,
BEZAULT
ACCESSORIES (please order separately)
Strike Lead cover Cable
4621/4622 8810/8811 EA208 (6m)
EA209 (10m)
ACCORDING TODIN 4102-18/DIN 18250
8121
8131
COMPATIBILITY CHART FOR CYLINDERS, FITTINGS AND ACCESSORIES FIRE APPROVAL
*) For more information please contactAbloy Oy Tampere Factory
6
TECHNICAL DETAILS
Operating voltage 12 VDC +15%/-10%or 24 VDC ±15 %
Current 0.48 A (12 V, +20° C)or 0.24 A (24 V, +20° C)
Monitoring bolt, panic opening handleTemperature range -20° C...+60° CBolt throw rectangular bolt 20 mm,
double action bolt 10 mmBackset 55, 60, 65, 80, 100 mmForend 20, 24 mmSpindle 8 mm 8140 - 8143
9 mm EL540 - EL547EL340 - EL341EL140 - EL141
(8140, 8141, EL540, EL541with split spindle)
FINISH
Stainless steel forend, chrome platedlock body.
CYLINDERS
Europrofile DIN type; ABLOY ®
DISKLOCK PRO or other.
PACKAGE
ABLOY ® 8140, 8141, EL540 and EL541 are electric locks with outside handle controland overriding inside handle. ABLOY ® 8142, 8143, EL542 and EL543 are electric lockswith electric control on both handles.
APPLICATIONS
The locks are especially suitable for use in the interior (and exterior) doors of com-mercial premises, apartment buildings, industrial buildings etc. and ideal for use withaccess control systems.
8140, 8141, EL540 and EL541 are suitable for use in exit doors as the door can alwaysbe opened with inside handle.
The locks provide quick and easy use and offer a cost-effective way of electric lockingproviding considerable advantages over i.e. electric strike.
The locks can be controlled by a variety of impulse generating equipment, i.e. card rea-der, key pad, timer or push button. All the locks are compatible with both long platesand round escutcheons.
Also available:EL544 - EL547: same as EL540 - EL543 but compatible with 22 mm cylinderEL340 mechanical lock with microswitch monitoringEL341 same as EL340 but compatible with 22 mm cylinderEL140 mechanical lock EL141 same as EL140 but compatible with 22 mm cylinderEL550-553 same as 8140 but according to French standardEL150 same as EL140 but according to French standard
ø6
20
38
20/24
235
3
ø8
3072
821
,5 165
8*8
55/60/65/80/10088/93/98/113/133
10
16,5
9*9
ELECTRIC LOCK WITH HANDLE CONTROLABLOY®8140 - 8143, EL540 - EL543
Lock case dimensions conform to DIN18250.
DIMENSIONS
Lock case, fixing screws, connection plugs,drilling, fitting and wiring intructions.
7
FUNCTION
8140, 8141, EL540, EL5418140 and EL540 are fail locked type locks. They can be operated with outside handlewhen electric control is switched on. When electric control is switched off, outsidehandle has no effect on bolts.
8141 and EL541 are fail unlocked type locks. They can be operated by outside handlewhen electric control is switched off. When electric control is switched on, outsidehandle has no effect on bolts.
8142, 8143, EL542, EL5438142 and EL542 are fail locked type locks which can be operated by outside and insidehandle when electric control is switched on. When electric control is switched off,handles have no effect on bolts.
8143 and EL543 are fail unlocked type locks which can be operated by handles whenelectric control is switched off. When electric control is switched on, handles have noeffect on bolts.
Through mechanical override locks can always be opened with key.
Unlocked/Locked
NCCNO
Position of bolt
NCCNO
RQE (8140, 8141)
Inside handle
(STAB 24 V DC ±15%)
(STAB 12 V DC +15%/-10%)or
Monitoring:
OpenClosed
+ 12 VDC STAB +15%/-10% or+ 24 VDC STAB ±15%
Monitoring:
Bolt outHandle down
Sabotage loop
Bolt inTrigger bolt in
NC
NC
C
NCC
NC
C
NC
WIRING DIAGRAM
CY304
EUROPROFILE DIN CYLINDERSABLOY DISKLOCK PROSingle CY303
Double w/thumbturn
Also compatible with other EuroprofileDIN type cylinders and fittings
FITTINGS
ABLOY*),Ruko, IKON,
BEZAULT
ACCESSORIES (please order separately)Strike Lead cover Cable
4621/4622 8810/8811 8140-8143; EA212
EL540-EL547; EA208-EA209
ACCORDING TODIN 4102-18/DIN 18250
EL540-EL543
COMPATIBILITY CHART FOR CYLINDERS, FITTINGS AND ACCESSORIES FIRE APPROVAL
Double
CY305 EL340-EL341; EA208-EA209EL550-EL553; EA208.EA209
EL544-EL547
EL340, EL341
EL140, EL141
*) For more information please contactAbloy Oy Tampere Factory
8140-8143 EL540-EL543
8
TECHNICAL DETAILS
Operating voltage 12VAC or12VDC +15%/-10%
Current idle 60 mA, norm. 0.3 A,max 1.2 A
Adjustable delay 2...15 secMonitoring bolt, panic opening
handle, doorTemperature range -20°C...+60°CBolt throw rectangular bolt 20 mm,
double action bolt 10 mmBackset 35, 45 mmForend 24 mmSpindle 9 mm
FINISH
Stainless steel forend, chrome platedlock body.
CYLINDERS
Europrofile DIN type; ABLOY ®
DISKLOCK PRO or other.
PACKAGE
Lock case, control unit, fixing screws, drilling,fitting and wiring instructions.
DIMENSIONSABLOY ® 8320 is a motor lock with rectangular bolt and double action bolt for narrowstile doors.
APPLICATION
8320 is suitable for use on doors of commercial premises, office and apartment buil-dings, industrial buildings etc. It can be used in emergency exit doors as the door canalways be opened with inside handle.
The lock is ideal for exterior doors (and interior, i.e. compartmentation doors) requi-ring high security.
8320 can be controlled by a variety of electrical impulse generating equipment, i.e. cardreader, push button, key pad and timer.
The lock can be connected to automatic swing door operators.
Also available:8330 - same as 8320 but compatible with 22 mm cylindersEL430 - same as 8320 but according to French standard
ø8
24
3
20
3392
270
234
21,5
91ø10
10
52,5/62,5
35/45 20
MOTOR LOCK ABLOY ® 8320
9
FUNCTION
Bolt is withdrawn by motor and thrown by spring force.
If bolt is thrown by depressing the trigger bolt manually when door is open, bolt iswithdrawn by motor immediately after trigger bolt is released to prevent the abuse oflock.
Bolt and double action bolt are deadlocked when they are thrown to their outermostposition. Double action bolt will be unlocked when bolt is withdrawn.
In the event of power failure the bolt is thrown automatically, but there is alwaysmechanical override to open the lock with inside handle or with key.
Door contacts (8952; see page 12) are recommended.
CONTROL SWITCH
Continuous; bolt is retained in lock case and lock remains open.Momentary; bolt is deadlocked after an adjustable delay of 2...15 seconds.
Door contact
(optional)
Control unit
12 VAC/12 VDC +15%/-10%
OpenClosed
Trigger bolt
Door (optional)
Bolt outHandle down
Sabotage loop
Bolt in
Monitoring:
NCNCC
NCC
NCC
NCC
NCC
Door contact(optional)
WIRING DIAGRAM
CY304
EUROPROFILE DIN CYLINDERSABLOY DISKLOCK PROSingle CY303
Double w/thumbturn
Also compatible with other EuroprofileDIN type cylinders and fittings
FITTINGS
IKON, Ruko,BEZAULT
for exampleIKON S618
orIKON S6B8
ACCESSORIES (please order separately)
Strike Lead cover Cable
4622 8810/8811 EA208 (6m)
EA209 (10m)
ACCORDING TODIN 4102-18/DIN 18250
8320
COMPATIBILITY CHART FOR CYLINDERS, FITTINGS AND ACCESSORIES FIRE APPROVAL
Double
CY305
8330
10
TECHNICAL DETAILS
Operating voltage 12VDC + 15% / -10% or24VDC ±15 %
Current 0.48 A (12 V,+20 C), 0.24 A(24 V,+20 C)
Monitoring bolt, panic opening handleTemperature range -20°C...+60°CBolt throw rectangular bolt 20 mm
double action bolt 10 mmBackset 35, 45 mmForend 24 mmSpindle 9 mm
(EL440, EL441, with split spindle)
FINISH
Stainless steel forend, chrome plated lock body.
CYLINDERS
Europrofile DIN type; ABLOY ®
DISKLOCK PRO or other.
PACKAGE
Lock case, fixing screws, drilling, fitting and wiring instructions.
APPLICATION
The locks are suitable for use on doors of commercial premises, office and apartmentbuildings, industrial buildings etc. The locks are ideal for exterior doors and interiordoors requiring high security. EL440/441 can be used in emergency exits as the doorcan always be opened with inside handle.
The locks can be controlled by a variety of impulse generaring equipments, i.e. cardreader, key pad, push button or timer.
Also available:EL444: same as EL440 but compatible with 22 mm cylinderEL445: same as EL441 but compatible with 22 mm cylinderEL446: same as EL442 but compatible with 22 mm cylinderEL447: same as EL443 but compatible with 22 mm cylinderEL240: mechanical lock with microswitch monitoringEL241: same as EL240 but compatible with 22 mm cylinderEL040: mechanical lockEL041: same as EL040 but compatible with 22 mm cylinder
ELECTRIC LOCKS WITH HANDLE CONTROLABLOY ® EL440, EL441, EL442, EL443
/45
/62,5
11
+ 12 VDC STAB +15%/-10% or+ 24 VDC STAB ±15%
Monitoring:
Bolt outHandle down
Sabotage loop
Bolt in
UnlockedLocked
NC
NC
C
NCC
NC
C
NCTrigger bolt in
WIRING DIAGRAM
CY304
EUROPROFILE DIN CYLINDERSABLOY DISKLOCK PROSingle CY303
Double w/thumbturn
Also compatible with other EuroprofileDIN type cylinders and fittings
FITTINGS
ABLOY*),IKON, Ruko,
BEZAULTfor exampleIKON S613
orIKON S6B3
ACCESSORIES (please order separately)
Strike Lead cover Cable
4622 8810/8811 EA208 (6m)
EA209 (10m)
ACCORDING TODIN 4102-18/DIN 18250
EL440-EL443
COMPATIBILITY CHART FOR CYLINDERS, FITTINGS AND ACCESSORIES FIRE APPROVAL
Double
CY305
EL444-EL447
EL240, EL241
EL040, EL041
*) For more information please contactAbloy Oy Tampere Factory
FUNCTION
ABLOY® EL440 is a fail locked type lock. The lock can be operated with outsidehandle when electric control is switched on. When electric control is switched off, outsi-de handle has no effect on bolts. Inside handle always operates the lock.
ABLOY® EL441 is a fail unlocked type lock. The lock can be operated with outsidehandle when electric control is switched off. When electric control is switched on, outsi-de handle has no effect on bolts. Inside handle always operates the lock.
ABLOY ® EL442 is a fail locked type lock which can be operated by outside and insidehandle when electric control is switched on. When electric control is switched off, hand-les have no effect on bolts.
ABLOY ® EL443 is a fail unlocked type lock which can be operated by outside and insidehandle when electric control is switched off. When electric control is switched on, hand-les have no effect on bolts.
Locks can always be opened with key.
24
17
260
(480
)27
7 (4
97)
25 ø14
230
(450
)
ø14
12
MISCELLANEOUSLEAD COVERS FOR POWER TRANSFER
APPLICATION
The ABLOY® lead cover is designed to ensure the unbroken transfer of cable betweendoor and frame. The maximum diameter of a wire bundle transferable through thelead cover is 7.5 mm.The cable used should consist of several threads for increasedbending strength. If the opening angle of door is more than 120° or the distancebetween pin hinge and door frame is more than 20 mm,lead cover 8811 must be used.
DIMENSIONS OF 8810 (8811)
DOOR CONTACTSDoor contacts are used to indicate the position of door and are installed on doorframe and door. Max current 0.5 A, max voltage 100 VDC, 100 VAC, max power 7.5W(to resistive load).
max. 8 mm
8951 for wooden doorsLength 35 mm, diameter 9.5 mm
max. 8 mm
8952 for narrow stile doorsLength 40 mm, diameter 25 mm
EA212 (for 8140, 8141, 8142, 8143, EL550-EL553) multicore cable is used for connectingelectric lock to connection unit.The length ofthe cable is approx. 6 meters.
EA208, 6m cableEA209, 10m cable for8120, 8121, 8130, 8131,8320, 8330, EL540 - EL547,EL440 - EL447, EL340EL341, EL240, EL241
CABLE
EA212
13
STRIKER PLATES
20
170
8
4621 for locks with 20 mmforend (rebated doors)
40
ABLOY
232
ABLOY
176
4622 for locks with 24 mm forend(flush doors)
POWER UNITSABLOY® 8551, 12-24 VDC, 0.5 A power unit. Suitable for small systems.
58
10595
8551
WHEN ORDERING ABLOY ELECTRIC LOCKS, PLEASE SPECIFY
- lock type- quantity- opening direction (please see Fig. 1 below)- backset- forend - voltage
Fig. 1
Please mark the direction as seenfrom the outside.
ABLOY is a registered trademark of Abloy Oy, one of the leadingmanufacturers of locks, locking systems and architectural hardware and theworld’s leading developer of products in the field of electromechanical locktechnology.
The unique ABLOY detainer disc cylinder mechanism has severaladvantages over conventional locking mechanisms. Ever since its inventionin 1907, it has been a symbol of high security and superior perfomance.
Our range consists of electromechanical locks, cam locks, padlocks, officefurniture locks, rim locks, lock cases, cylinders for different types of morticelocks, door closers, door automatics and architectural hardware. ABLOY locking solutions for every application are available from our world-widenetwork of distributors.
Customer-oriented development, combined with our long experience andextensive security expertise, mean that ABLOY security solutions employthe very latest technology to meet your needs.
The quality and environmental systemsused by Abloy Oy guarantee thatcustomers can be certain of ABLOY quality in every field. We received ourfirst Quality Systems Certificate - SFS ENISO 9001 - in 1989. Just eight years later,Abloy Oy was one of the first companiesin Finland to be granted an SFS-EN-ISO14001 Environmental Systems Certificate.
Our products are designed andmanufactured not only to provide highlevels of security, but also to be realible,user-friendly and aesthetically pleasing.ABLOY is your sign for security.
ABLOY _ the sign for security
8801
069
10/
2002