ABC of Cost Engineering
-
Upload
moufidmatthewjarjour -
Category
Documents
-
view
225 -
download
0
Transcript of ABC of Cost Engineering
-
8/11/2019 ABC of Cost Engineering
1/116
UC-NRLF
The A'B'G ofCOST ENGINEERING
DENHAM
-
8/11/2019 ABC of Cost Engineering
2/116
J/0;-.^W^
GIFTOF
-
8/11/2019 ABC of Cost Engineering
3/116
Digitized by tine Internet Arciiive
in 2007 witii funding from
IVIicrosoft Corporation
-
8/11/2019 ABC of Cost Engineering
4/116
-
8/11/2019 ABC of Cost Engineering
5/116
-
8/11/2019 ABC of Cost Engineering
6/116
ROBERT S. DENHAMChief Engineer
THE DENHAM COSTFINDING COMPANYCleveland
-
8/11/2019 ABC of Cost Engineering
7/116
The ABCCost Engineering
By
ROBERT S. DENHAM
Author of
The Fundamentals of Cost and Profit CalculationA Manual of Cost Engineering and Estimating
The Science of CostfindingPractical Cost Engineering
Etc., Etc., Etc.
Published by
THE DENHAM COSTFINDING COMPANYCLEVELAND
-
8/11/2019 ABC of Cost Engineering
8/116
2^
Copyrighted 1919, by
The Denham Costfinding CompanyCleveland, Ohio
Printed by
The Caxton Company
Binding by
Forest City Bookbinding CompanyCleveland
-
8/11/2019 ABC of Cost Engineering
9/116
FOREWORD
The author's object is to make it possiblefor the busy executives of American manu-facturing enterprises to grasp in minimumtime, at least in outline, the principles and
advantages of the newest and most practi-
cable methods of determining the cost ofproducing and selling the products of theirfactories.
It is an unfortunate fact that at thepresent time a great majority of manu-facturers, following traditional practices,
are confidently leaning upon cost account-ing methods which delude them into thebelief that they are more successful than isactually the case. Not infrequently it ismade to appear that their businesses arebeing profitably conducted when as amatter of fact they are losing money.
It is a demonstrable fact that, once
financed and established, a factory can be
-
8/11/2019 ABC of Cost Engineering
10/116
\ ;'';dl&E'A-6'C OF COST ENGINEERING
operated at a loss of ten per cent of itscapital per year, and remain in activeoperation for fifteen years. During muchof this time its directors may authorize andpay dividends, and according to common
erroneous accounting practices, it mayseem to be reasonably successful. Fre-
quently these conditions exist without even
a suspicion on the part of the managingexecutive, much less his knowledge.
The fact that in normal pre-war timesthe life of the average manufacturing con-
cern was less than fifteen years, proves con-clusively that there was, and is, somethingradically wrong with the business methodsin common use.
Such conditions warrant the plainest
language on the part of the author, and hisstatements deserve the most thoughtful
consideration and investigation on the partof the reader, particularly if he is the
managing executive of a factory.
Every statement proffered, no matter
how exaggerated it may appear on its face,
6
-
8/11/2019 ABC of Cost Engineering
11/116
THE A-B-C OF COST ENGINEERING
is subject for proof. Each of the factspresented represents a phase of the con-
crete results of many years of investigationand practice on the part of an organization
of capable Cost Engineers whose expe-
rience covers the planning, installation andoperation of Cost Engineering systems in
approximately seven hundred factories.
The executive who, because he has beensuccessful, or having studied the works of
so-called authorities on cost accounting
believes himself fully informed, dismisses
the subject of Cost Engineering without
careful thought, may thereby forfeit his
opportunity to greatly increase the profit-ableness of his efforts.
Cost Engineering makes it possible toincrease profits, not so much by advancingprices as by revealing the weak points inthe making and selling effort, so that specialattention may be given to strengtheningthem, thereby decreasing existent unseen
losses which absorb part or all of the
normal profits.
7
-
8/11/2019 ABC of Cost Engineering
12/116
THE A-B-C OF COST ENGINEERING
The author hopes that the executive whoreads this book will derive both pleasureand profit from its perusal, whether ornot he avails himself of the services ofthis company.
Respectfully submitted,
The Denham Costfinding CompanyBy Robert S. Denham, Chief Engineer
-
8/11/2019 ABC of Cost Engineering
13/116
-
8/11/2019 ABC of Cost Engineering
14/116
**Some ships sail East, and some sail West,In the selfsame winds that blow;
' Tis the setof
the sails, and not the gales,That takes them ivhere they go,**
Selected,
10
-
8/11/2019 ABC of Cost Engineering
15/116
THE A-B-C OF COST ENGINEERING
CHAPTER ITHE MYSTERIES OF COST
Mystery is always coexistent withignorance.
Nothing is mysterious to those whoknow the truth.
There are no mysteries in cost tothose who know the principles ofCost Engineering, and how to applythem.
Cost of production is a mystery tomost manufacturers because theyeither do not know how to correctly
determine the cost, or have notapplied their knowledge.The most unfortunate condition
confronting American industries to-day is the almost universal preva-
lence of erroneous teachings in regardto methods of determining cost.
The great mystery of business isthe so-called ''Overhead Expense or Burden of cost accounting.
11
-
8/11/2019 ABC of Cost Engineering
16/116
-
8/11/2019 ABC of Cost Engineering
17/116
THE A-B-C OF COST ENGINEERING
Whyall this wasted effort, con-
fusion of thought, and uncertaintyof result?
Simply because traditional costaccounting depends upon the opin-ions of persons to whom the funda-mental principles of expense andexpense distribution are unknown.In the absence of knowledge of suchprinciples every man tried out hisown theory according to his oppor-tunity.
The real difficulty antedates ma-chine production.
There was a time when all workwas done by hand. Factories weresmall, often in a room of the em-ployer's house, sometimes in hiscellar, or in the attic of his barn.Expenses were few. Practically allthat he required, besides the shelter,was a few crude benches and suffi-cient capital to provide materials andpay for his helpers. The workmenusually preferred to own the tools
13
-
8/11/2019 ABC of Cost Engineering
18/116
THE A-B-C OF COST ENGINEERING
with which they worked and keepthem in condition.
The manufacturer made no seriouseffort to determine cost beyond thecomputation of the outlay for mate-rials and direct wages on designatedlots. To the total of these he addeda percentage large enough to coverhis living expenses and a margin ofprofit. His customers paid the priceshe asked, or went without the goods.There was often no competition. Ifany existed, it was local, becausethere were no such transportationfacilities as have since been developed.There were no traveling salesmen.
With the advent of machine pro-duction conditions changed. Theemployer was compelled to providethe equipment. He faced the neces-sity for a larger investment, andadded expenses for power, suppliesand repairs.
With the application of powercame the railroad, and the advan-
14
-
8/11/2019 ABC of Cost Engineering
19/116
THE A-B-C OF COST ENGINEERING
tages that it offered for a larger fieldof action. His horizon was enlarged,facilities were rapidly increased, andthese in turn developed greater prob-lems.
His old price-making formulas wereoutgrown, and required modificationto meet the new conditions. Inhis calculation he now recognizeda new factor, for want of a better
term he called it overhead expense.The cost of his product consisted ofthree factors: materials, wages, andoverhead. To the total of these headded a margin for profit.
Sometimes he included in the overhead a salary for himself, oftenhe took the position that he got hisliving from the profits. Depreciationwas rarely thought of, and more
rarely included. Interest on invest-ment as an item of expense was neverdreamed of. It was taken for grantedthat a man in business should furnishthe capital required to serve his cus-
15
-
8/11/2019 ABC of Cost Engineering
20/116
THE A-B-C OF COST ENGINEERING
tomers and carry their accountswithout remuneration other than theprofits. If he owned the building inwhich his factory was located heboasted that he had no rent to pay,and its use was provided withoutcharge to his customers.
To this day many manufacturersbelieve that the inclusion of salaryfor the owner, rent of the ownedbuilding, depreciation and intereston the investment is optional withthe concern. Many accountants,because of ignorance of fundamentalprinciples, accept the manufacturer'sviewpoint. Assuming that these arematters of opinion is responsible forthe lack of uniformity and the end-less discussions which befog the prac-tice of cost accounting.
To questions such as these therecan be but one correct answer. Thatanswer is given in Cost Engineering.For the first time in the history ofmanufacture the principles of expense
16
-
8/11/2019 ABC of Cost Engineering
21/116
THE A-B-C OF COST ENGINEERING
analysis and distribution have beenformulated. They have been triedout in hundreds of factories. If asingle instance had been found, orcould be imagined, where these prin-
ciples did not prove true there wouldbe reason to believe that they wereincorrectly formulated; but large ex-perience has failed to find themmisstated.
Cost accounting authorities arepractically unanimous in their pre-sentation of the traditional theorythat the cost of production consistsof the three elements: materials,
direct wages, and overhead. Theyagree as to charges for materials anddirect wages, but indulge in endlessand unconvincing discussions as tomethods of distributing the over-
head.The mystery still remains unsolvedand so long as accountants create the overhead just so long will it remainunsolved.
17
-
8/11/2019 ABC of Cost Engineering
22/116
THE A-B-C OF COST ENGINEERING
The whole theory of ''overheadexpense is wrong. There are no overhead expenses in manufacture.The ''overhead expense account isthe cesspool of business. It is the
catch-all for every item that theaccountant does not know how toproperly charge to the product. That does not know'' spells ignorance. Theextent of the overhead account in
a cost accounting system indicatesthe extent to which the accountant isignorant of correct methods of ex-pense distribution.
Mystery and ignorance are alwayscoexistent.
Learnthe truth
andmystery will disappear. There areno mysteries in cost to those whounderstand the principles of CostEngineering and know how to applythem.
18
-
8/11/2019 ABC of Cost Engineering
23/116
THE A-B-C OF COST ENGINEERING
CHAPTER IIWHAT IS A COST SYSTEM?
What is a Cost System?Every man engaged in manufac-
ture is confident that he can answerthis question inteUigently, but asidefrom the irrelevant reply, ''A CostSystem is a system for finding thecost of production, it is not likelythat two men out of a thousandwould agree.
At the same time practically everyone of these men would confidentlyexpress
theopinion
thatif
he had thenecessary time, and set about it, hecould plan and install a thoroughlyaccurate cost system.
Thousands of men have tried it,
and failed. Accountants, employedspecifically for this purpose, withample time and facilities, during longperiods, covering months and inmany instances years, have failed.
19
-
8/11/2019 ABC of Cost Engineering
24/116
-
8/11/2019 ABC of Cost Engineering
25/116
THE A-B-C OF COST ENGINEERING
Results must be provable.According to the recognized author-
ities upon the subject of cost account-ing, a cost system is an establishedclerical routine whereby records arekept and each order, or lot ofproduct, charged directly with thematerials required for its production,with the wages of the workers en-gaged directly in its production, anda share of the overhead burden,which supposedly includes all of theother expenses involved in the opera-tion of the factory.
In more than nine-tenths of thecost accounting systems in use, the overhead is distributed to thefactory orders on the basis of directwages. In a relatively small propor-tion the expenditures for materials
and direct wages are combined todetermine the so-called prime costwhich is used as a basis for the dis-tribution. In still fewer instances theoverhead is averaged over estimated
21
-
8/11/2019 ABC of Cost Engineering
26/116
THE A-B-C OF COST ENGINEERING
productive hours of machines. Inthese cases the result is found bycombining the expenditures for mate-rials and direct wages with the pre-determined machine hour rate for
such hours as were required.The three methods cited in the fore-going paragraph comprise practicallythe range of methods offered in thebooks on cost accounting. They are
constantly referred to in the currentliterature of the accounting profes-sion. Accountants engaged in estab-lishing cost systems are advised tochoose the method in their opinion
most practicable for the case in hand.In rare instances, as in the case ofcement factories, or others making asingle item measurable by a singleunit, as the barrel, such a system
might prove practicable. But infactories making product in anyvariety, or different sizes of the samearticle, these methods will be foundgrossly inaccurate. The greater the
22
-
8/11/2019 ABC of Cost Engineering
27/116
THE A-B-C OF COST ENGINEERING
variety the less likely are the resultsto be dependable.
If it could be shown that theexpenses of operating the factory,
aside from the direct wages, were
involved in the various processes inthe same proportion as the rates ofwages paid, there would be someexcuse for the theories advanced.
If it could be shown that the
expenses of materials had any rela-tion to the expenses involved in the
processes, materials might be said toconstitute a basis for the distributionof the overhead expenses.
Examination of the expenses ofprocessing operations will reveal to
the casual observer that there is nota single expense item which has anydirect relation either to the wages
paid or to the expenditure for mate-rials used. There is not a single itemof operating expense that increasesproportionately with the increase ofwages, or decreases with a decrease
23
-
8/11/2019 ABC of Cost Engineering
28/116
-
8/11/2019 ABC of Cost Engineering
29/116
-
8/11/2019 ABC of Cost Engineering
30/116
THE A-B-C OF COST ENGINEERING
1. Any system that deserves theconfidence of the user should beprovable.
2. Any system the results of whichare materially influenced by the per-
sonal opinion of its author or user isworthless.
3. Any system which depends forresults upon the distribution of an overhead,'' burden/' or general
expense account is erroneous andmisleading.
4. Any system in which one or moreexpenses are assumed to constitutea basis for the distribution of other
expenses will not stand the test ofanalysis.
5. There is not a single expense,much less a mass of expenses, thatincreases proportionately as wagesare advanced, or decreases as wagesare reduced.
6. There is not a single operatingexpense that has any definite relation
26
-
8/11/2019 ABC of Cost Engineering
31/116
THE A-B-C OF COST ENGINEERING
to the cost of the materials of whichthe product is composed.
7. Neither direct labor, nor mate-rial, nor both combined, will serve asa basis for the distribution of any or
all of the operating expenses.8. The fact that all expenses have
been considered and included in thecost is not an evidence that the costof individual orders or items has been
correctly determined.9. Neither the fact that a certain
method has been used for a long termof years, nor that during the periodof its use the concern has enlarged
and paid dividends, can be admittedas evidence that either the methodsor the results are correct.
27
-
8/11/2019 ABC of Cost Engineering
32/116
The day of haphazard and makeshift
methods has passed. The manufacturer whowishes to stay in business must fix his prices
upon provable facts, otherwise he is notdeserving of the confidence of his customers
or of the community.
Selling prices are fairest when they includenot only a reasonable profit above cost of
manufacture, but the elements of Efficiency
of production and Management which assurethe buyer that the cost has not been inflated
through careless or extravagant business
methods.
28
-
8/11/2019 ABC of Cost Engineering
33/116
THE A-B-C OF COST ENGINEERING
CHAPTER IIICOST ENGINEERING
Cost Engineering is the science ofcostfinding by analysis of the proces-
ses and expenses of production, andthe charging of particularized ex-pense factors, through process unitrates, in the exact ratio of utilization.
The objects of Cost Engineering
are five in number:1. To determine by analysis the
cost per unit of the various processesinvolved in the manufacture of prod-uct.
2. To determine in a provablemanner the cost of each lot of productmanufactured.
3. To determine the relative profit-ableness of the several articles or linescomprising the range of product.
4. To show in analytical form thecost of each lot, that unprofitableitems may be isolated and studied
29
-
8/11/2019 ABC of Cost Engineering
34/116
THE A-B-C OF COST ENGINEERING
with a view to changing methods ofproduction, specifications, or prices,so that the sale of each will yield afair profit.
5. To show the relative cost ofdifferent lots of the same article, forthe purpose of revealing the mosteconomical methods of production,as a means of efficiency and economy.
In Cost Engineering Cost'' isalways considered as the sum or totalof all expense elements involved inthe production and distribution ofthe items on which cost is being con-sidered up to the moment at whichcost is being determined. The ele-ments of cost are ''expenses.
This is in striking contrast withcost accounting, in which such termsas ''direct labor cost, material cost,
prime cost, actual cost, factorycost, gross cost, net cost, etc.,confuse and mystify to a degree thatrenders discussion almost if not quiteunintelligible.
30
-
8/11/2019 ABC of Cost Engineering
35/116
THE A-B-C OF COST ENGINEERING
To be understood, the participantsin a discussion must use a commonterminology. In other words theymust speak the same language.
Cost accounting has never had a
definite terminology. Its terms meandifferent things to different individ-uals. Practically no two accountantswould give definitions of the impor-tant term cost which could be
harmonized. Cost accountingstarts
with mystery and ends in mist.
Cost Engineering has a definiteterminology.
Cost Engineering is governed byfundamental principles as definiteand understandable as the principlesof mathematics or physics.
The application of these principlesand their concomitant rules to thefactors of production develop resultsas definite, logical, and provable asthe results of other mathematicalcalculations.
31
-
8/11/2019 ABC of Cost Engineering
36/116
THE A-B-C OF COST ENGINEERING
Definiteness is the keynote of Cost
Engineering.Every expense element is definite.
It is definite in amount or it could notbe recorded. It is definite in purposeor it would not be authorized. Itspurpose is always the procurement ofa definite service or commodity moreadvantageous than the amount ofmoney involved, otherwise the ex-change would not be made. Theadvantage gained by the expenditureimparts a definite degree of benefitwherever purchased item is utilized.
Correct distribution of an expenseitem demands that the charge shall
always be made against the productbenefited, and if more than one itemor process be benefited the^^chargesmust be in the ratio of benefit oradvantage conferred.
In manufacture, product alwaysconsists of definite materials, to whichhave been applied the time of definiteformative processes.
32
-
8/11/2019 ABC of Cost Engineering
37/116
THE A-B-C OF COST ENGINEERING
Materials are measurable.The expenses involved in the pur-
chase, transportation, storage, andhandling of materials can be definitelydetermined.
With definite specifications for ma-terials, definite information as toexpenses involved, there should beno question about the possibility ofdetermining the cost of materials
required for any given lot of product.Processes are definite.A capable engineer can in a short
time make a complete list of theprocesses which any given factory is
equipped to perform.The expenses required for the
operation of processes are definite.The purposes for which the expend-
itures are made are definite.
Expenses always have one of twoqualities: they are either direct orindirect.
Direct expenses are items having asingle beneficiary, to which they are
33
-
8/11/2019 ABC of Cost Engineering
38/116
THE A-B-C OF COST ENGINEERING
chargeable in total.No act
of dis-
tribution is required.
Indirect expenses are items havingtwo or more beneficiaries to whichthey must be charged in the ratio ofbenefit conferred.
Indirect expenses may be groupedfor simultaneous distribution onlywhen the beneficiaries are identical,the ratio of benefit the same, and theirbenefits are measurable by a commonunit. (Ignorance of this principle hasbeen the most serious obstacle in thepath of those who tried to solve theproblem of overhead distributionin cost accounting. Having violatedthis principle practical distribution
becomes impossible.)None of the operating expenses
have any relation to, or are involved in,the ratio of wages paid to workmen.
Practically every expense involvedin the operation of manufacturingprocesses has a definite relation to theelement of time.
34
-
8/11/2019 ABC of Cost Engineering
39/116
THE A-B-C OF COST ENGINEERING
Rent is paid on a time basis, or ifthe building is owned the items ofdepreciation and insurance on thebuilding, and interest and taxes onthe investment in building and land
are calculated on a time basis.As between the processing divi-
sions of a factory the expenses ofproviding the housing facilities arecalculated by the use of the factors
of area and time.The expenses incident to the equip-
ment investment, e. g. depreciation,insurance, interest and taxes, are allrelated to time. The amount of
investment and the element of timeare the important factors.
The expenses of the power plant,or for purchased mechanical energyare related to time. Horsepower
required for operating the machinesand the time of operation providethe means of determining the pro-portions of power expense chargeableto processing divisions.
35
-
8/11/2019 ABC of Cost Engineering
40/116
THE A-B-C OF COST ENGINEERING
Thesuperintendent supervises
theactive time of productive processes,while the foremen supervise the timeof the individual employes whetherclassed as productive or nonproduc-tive.
Water, soap, towels, and toiletfacilities are required for the con-venience of every individual, duringthe time that he is in the factory oroffice. These items are related topersonal time.
Supplies consumed in the operationof the processes are required practi-cally in proportion to the activeoperating time.
Records of the activities of manu-facturing processes and individualsrequire the use of supplies relativelyin the proportions of the active timeof the processes. Activity, not idle-ness, creates the necessity for theexpenses of such supplies and theservices of time-recording and cost-computing clerks.
36
-
8/11/2019 ABC of Cost Engineering
41/116
THE A-B-C OF COST ENGINEERING
The normal unit of time measure-ment is the hour.
The logical unit of process meas-urement is the process hour.
The cost of process hours will varywith the expense elements involvedand the number of process hours overwhich the process expenses must beaveraged to get the average cost ofthe process hour.
The cost of a process hour is acomplete cost. Every element in-volved in the process having beenincluded, there is nothing to add orsubtract.
The total of the expenses involvedin a given process during a givenperiod of time, divided by the charge-able (revenue producing) hours ofthat process actually charged against
the production orders during thesame period, determines the rate atwhich such hours must be chargedto determine the cost of that processas applied to the order.
37
-
8/11/2019 ABC of Cost Engineering
42/116
THE A-B-C OF COST ENGINEERING
It follows that the total chargesagainst all production orders duringa given period must practically bal-ance with the total of the expendi-tures of the same period. (These
totals are almost invariably withinone-quarter of one per cent of anexact balance.)
Wages may or may not be includedin the process hour cost rate, at the
choice of the engineer.Wages comprise simply one ele-
ment in cost.Wages have no relation to the
total of the process hour cost.
Wages are always related to time.They are computed on the basis oftime worked, or pieces processed orassembled. Piecework rates are seton a time basis.
Where no special reason exists fora separate consideration of wagesthey should always be included asone of the elements of the processhour cost. Inclusion within the hour
38
-
8/11/2019 ABC of Cost Engineering
43/116
THE A-B-C OF COST ENGINEERING
rate materially reduces the clericaleffort required for the operation ofthe cost system.
In replacing a cost accounting sys-tem, by the planning and installationof a Cost Engineering system, it isusual to find that the clerical effortis lessened.
Cost Engineering corrects all of theinaccuracies of cost accounting.
In Cost Engineering there is no overhead expense. All expenseelements are definite.
Cost Engineering is analytical. Itanalyzes and particularizes where
cost accounting amalgamates andgeneralizes.
Cost Engineering is practical whilecost accounting is theoretical.
39
-
8/11/2019 ABC of Cost Engineering
44/116
*' Business will not be on a sound economic
basis until prices rise and fall with costs.
''The word 'fair' in connection with prices
lacks virility; it not only admits but invites
debate; it suggests possibilities of variations.
A fair price is a right price y and the rightprice depends upon conditions that are sus-ceptible to scientific investigation.
''Price is fundamentally a scientific propo-sition.
As the problem of cost, which is of firstand fundamental importance, is worked out,
the question of price naturally follows.
Whether a man shall be permitted to addlittle or much to his cost by way of profit, onething is certain, the right price never falls
below cost.''' Arthur Jerome Eddy.
40
-
8/11/2019 ABC of Cost Engineering
45/116
THE A-B-C OF COST ENGINEERING
CHAPTER IVGETTING THE COST OF THE LOT,
OR ORDERThe cost of the order, whether it
specifies a single article, as a machine,or a lot of identical articles, is the chiefobjective of Cost Engineering effort.
The cost of the order includes the ex-penditures for materials, the expenses
of merchandising insofar as they applyto the materials specified; the cost ofthe process units required; and, if theorder is for articles already sold, itshould include the expenses of selling.
Because the plan of the systemmust conform to the particular con-ditions that exist in the individualfactory for which it is designed, it isimpractical to present the forms of a
system in this chapter. An outlineof general features however may beof practical use.
There are five steps in the opera-tion of a Cost Engineering system:
41
-
8/11/2019 ABC of Cost Engineering
46/116
THE A-B-C OF COST ENGINEERING
1. Making the initial records ofmaterials and process time.2. Recording chargeable and non-
chargeable time of processes.3. Assembling the records of ma-
terialsand process time applied toindividual production orders.
4. Distribution and summarizationof operating and selling expenses.
5. Calculating the order cost.
Thefirst
three of these steps aredaily routine. The first is accom-plished by the persons in charge ofmaterial stocks, and those in directcharge of processing units. Thesecond and third are included in
theduties of the cost clerk.The fourth step is taken monthly,
and is usually included in the dutiesof the accountant. The time for thisdistribution and summarization isimmediately after the completion ofthe trial balance of the regularaccounting system in use.
The fifth step is taken immediately
42
-
8/11/2019 ABC of Cost Engineering
47/116
THE A-B-C OF COST ENGINEERING
after finishing the processes of theproduction order. The cost of eachorder or lot should be known notlater than the day following thecompletion of the work, so that if
necessary, or advisable, billing maybe done on the basis of known cost.In making records of materials
chargeable to orders a requisitionsystem will be found advantageous.
This provides a double check on thematerials, as one person makes arecord to which another attaches hissignature or initials, in confirmationof the receipt of the specified items.
Records of process time (not wages)are made by the persons in charge ofactive processing units. The timereport carries the data necessaryregarding date, machine, operator,
timeof
operation,quantity
output, orother items as the conditions demand.The record of chargeable and non-
chargeable time, made daily andclosed up monthly, provides valuable
43
-
8/11/2019 ABC of Cost Engineering
48/116
THE A-B-C OF COST ENGINEERING
datafor
the management, as well asdeveloping the number of processhours to which the process expensesare chargeable.
The assembling of records of mate-rials and time applied to individualproduction orders, is part of the dutyof the cost clerk. In fact, this is thechief duty of that individual. It isusually found advisable to tran-scribe the items from the reports ofthe operatives to the order costmemorandum, a special form ofrecord, designed in every case tomeet the requirements of the factoryin which the records are made. Othermethods of assembling this data maybe used where there is special reasontherefor.
The author feels that at this pointhe should warn the reader against apossible misunderstanding.
To clearly grasp an outline ofCost Engineering methods the sub-ject should be approached with an
44
-
8/11/2019 ABC of Cost Engineering
49/116
-
8/11/2019 ABC of Cost Engineering
50/116
THE A.B-C OF COST ENGINEERING
form to his own impression of whatthey should be.
He must remember that a costsystem is not a price-making system.Cost is a fact, the definite sum ofcertain definite expense factors. Thecost system is simply the plan andmeans by which the expense factorsare determined and charged. Sellingprices are purely arbitrary, and while acost system serves as a guide for mak-ing profitable selling prices, the cost is
to be honestly determined on the basisof facts. The cost remains the sameregardless of price. Giving the productaway has no influence on the cost.
Each expense element must be soapplied that each process will becharged with the proportion which,by measurement, represents the pro-portion of the advantage or benefitaccruing from the expenditure.
That this may be properly accom-plished the accountant should bethoroughly instructed by a compe-
46
-
8/11/2019 ABC of Cost Engineering
51/116
THE A-B-C OF COST ENGINEERING
tent and experiencedcost engineer.
Too many accountants, because ofthe latitude permitted in cost ac-counting practice, think that theyare competent to pass judgment asto where certain expenses should beapphed. A desire to please the ''bossby making unprofitable items appearprofitable, adds to the temptation.Even the boss himself sometimesyields to the temptation to hide ineffi-ciencies by influencing the results.
Any deviation from the positiveapplication of principles and rules isbound to be reflected in the results.One cent per unit improperly appliedin the summarization destroys theaccuracy of the result. Where acent is omitted the goods may bepriced too low, attracting sales at aloss of normal profits. The amountof expense being definite in total theomission at one point places an addedburden at another, with the result ofhindering sales of profitable business.
47
-
8/11/2019 ABC of Cost Engineering
52/116
THE A-B-C OF COST ENGINEERING
The manufacturer may give awayhis product, or his profits, and enjoythe reward of the philanthropist, butif he juggles the figures of his costsystem, he is on a par with the man
who arbitrarily changes the figuresin a mathematical problem, and pro-claims himself a fool.
Finally, with records of items ofmaterials charged to production
orders at cost (not purchase price,for cost includes the expenses in-
volved in transportation, investmentand handling merchandise) ; with thedefinite time of factory processes
charged at definite, proven costrates;
and with the expenses of sellingincluded where goods are alreadysold, the total cost of the productionorder is found by simply adding
together theitems involved.
There is nothing to add to the costexcept profit. There is no mysterious overhead burden, no element of a percentage for contingencies.
48
-
8/11/2019 ABC of Cost Engineering
53/116
THE A-B-C OF COST ENGINEERING
Cost found under the Cost Engi-neering methods provides for thereplacement of equipment worn outin the service of the customers. Itprovides for replacements made neces-
sary by new inventions and theinutility of machines, caused bychanges in the character of the out-put. It provides, before profit is cal-
culated, for payment to the stock-
holders, of interest on the moneyborrowed from them for the conductof the business, the evidence of whichis the stock certificate.
Cost Engineering in its entirety isa symmetrical structure, balanced inevery part. It requires the reader totake nothing for granted, but de-mands proof at every step. Its find-ings will prove as accurate as thework of the persons entrusted withits operation. Cost Engineering hasmade costfinding practically an exactscience.
49
-
8/11/2019 ABC of Cost Engineering
54/116
-
8/11/2019 ABC of Cost Engineering
55/116
THE A-B-C OF COST ENGINEERING
CHAPTER VCOST RECORDS AS A BASIS
FOR ESTIMATING
In the preceding chapters thereader has been shown the necessityfor discarding old and adopting newmethods; a comparison of the costaccounting fallacy with cost engi-neering practicability ; how all expensefactors are related to the time ele-ment, and the modus operandi ofCost Engineering.
He has been shown that cost is theresult of conditions and can beinfluenced only by changing condi-tions, not by schemes of figuring;that when production of an item isonce accomplished, no influence underthe sun can change the amount ofits cost.
We have no means of knowing thefuture except by predicting its proba-bilities upon the past. We know thatrecords of the past are safer than
51
-
8/11/2019 ABC of Cost Engineering
56/116
-
8/11/2019 ABC of Cost Engineering
57/116
THE A-B-C OF COST ENGINEERING
under the same conditions of equip-ment and supervision, work nextweek at the same rates of speed asthey worked last week; next monththey will produce as much in thesame hours as they did last month.The average rate of production perhour for one period of six months, ora year, will be about the same as foranother.
Now, if records are kept con-tinuously, and the average for twelvemonths used for one month; and atits close, the new month's recordadded, dropping off the twelfth monthpreceding; thus making a new aver-age, eleven-twelfths of the data beingthe same as in the previously usedaverage, there can be little change inresult. The only influence for changewill be the difference between thedata of the month added and that ofthe month omitted.
Output records will show even lessvariations. Machines are driven by
53
-
8/11/2019 ABC of Cost Engineering
58/116
THE A-B-C OF COST ENGINEERING
the same power, at the same speed,throughout busy seasons, and dull.
If, then, we have known rates ofoutput per hour for the various proc-esses, under the circumstances andconditions which prevail in a givenfactory; and also have known costper hour of operation of the sameprocesses; we have unquestionablythe safest possible basis for predicting,or estimating, future performanceand costs.
It is not safe for one factory to usethe records of another factory inmaking estimates. The atmospherein different factories varies greatly.
One factory is managed by an apa-thetic management and work movesslowly. Every employe feels theinfluence of lethargy and attuneshimself to the slow time of the insti-tution. In another factory, every-thing moves by schedules. They areset with the purpose of accomplishingresults in minimum time. There is in
54
-
8/11/2019 ABC of Cost Engineering
59/116
THE A-B-C OF COST ENGINEERING
this case very little lost motion. Theemploye never has to ask for orders.They are planned for in advance.
It would be ridiculous for one ofthese factories to use either the pro-
duction records or the cost rates of
another. Slow time usually meanslow hourly rates of cost, with highproduction cost, because compara-tively few pieces are finished in thehour. Rapid production, on theother hand, will probably influencehourly rates so that they will seemhigh, yet production costs are likelyto be lower than in the other case.
It follows that the estimates ofcost should, whenever possible, bemade upon the basis of carefullykept records of the performances ofmachines and people in the factory
producing the articles.Under ordinary conditions no two
men make estimates that will standcomparison. Estimates in the ordi-
55
-
8/11/2019 ABC of Cost Engineering
60/116
THE A-B-C OF COST ENGINEERING
nary sense are purely advance guesses,as to how much it will cost to producea certain number of items of givenspecifications.
More or less data are used by someestimators. Others make an out andout guess as to the price that shouldbe charged, without measurements orcalculations. Some of these people(and they are usually men whosework is not checked for errors orlosses) boast that they can tellwithin one per cent of what it willcost to make any article within thescope of the processes the factory isequipped to perform.
As a rule these people stop esti-mating as soon as a cost system hasbeen installed. They do not agreewith the findings of the system.Whenever they can, they either pre-vent or delay the installation of thesystem. It is only natural that theyshould not like to have their guessestested by a mechanically perfect
56
-
8/11/2019 ABC of Cost Engineering
61/116
THE A-B-C OF COST ENGINEERING
system. It is apt to injure their''prestige.
With a Cost Engineering Systemsuch as has been already described,and with complete production recordsfrom the factory divisions, the ele-
ment of guesswork is very largelyeliminated from the estimate.
However much we may like tothink otherwise, it is unquestionablytrue that the only safe measure of
the output of any process is theaverage for the factory or division.We like to think that we have highlyefficient people. We may have them,but their effect is only to raise the
average. The fact remains that theaverage output is the measure ofcapacity.
Estimating is pricemaking. Price-making is one of the most important
functions of management. The profit-ableness or unprofitableness of thebusiness hinges largely upon theselling prices being high enough to
57
-
8/11/2019 ABC of Cost Engineering
62/116
THE A-B-C OF COST ENGINEERING
yield a satisfactory profit. Not toohigh, lest the business be driven tothe competitor. There is a pointwhich insures fairness to all. |^^.
The cost system provides the datafor estimates which will be fair, and,when the product has been made,serve as a test of the correctness ofthe work of the estimator.
58
-
8/11/2019 ABC of Cost Engineering
63/116
THE A-B-C OF COST ENGINEERING
CHAPTER VIAUXILIARIES OF THE
COST SYSTEM
Two important features that, whilenot strictly designed for costfindingpurposes, are recommended as auxil-iaries to the Cost Engineering system,are the Perpetual Inventories, andMachine Records.
These features are establishedsimultaneously with the cost system,without additional fees, wheneverthe client is willing to authorize the
expenditures for supplies and opera-tion.
There are many manufacturerswho have not yet admitted the valueof the perpetual inventory of mer-chandise, including both raw mate-rials and finished product.
Few manufacturers would placeany considerable sum of money in acommon cash drawer, and give a keyto each of his employes, on the tacit
59
-
8/11/2019 ABC of Cost Engineering
64/116
THE A-B-C OF COST ENGINEERING
understanding that he should use itonly in the interest of the employer.
Yet, a large proportion of manu-facturers will, and do, unhesitatinglyinvest thousands of dollars in mate-
rials and merchandise, which is storedin open places, easily accessible toevery employe, without even appoint-ing a custodian whose duty it is tosafeguard the investment.
The manufacturer may have abso-lute confidence in the honesty of hisemployes. They may be as honest ashe is, but under such conditions heplaces before them the temptation to
help themselves to items that theywould otherwise have to purchase.Little leakages may seem unim-
portant, but the habit of pilferinggrows when no effort is made to
checkit,
and the confidence of theemployer in his employes may be-come a curse to them and a source ofgreat loss to himself. The perpetualinventory and requisition system are
60
-
8/11/2019 ABC of Cost Engineering
65/116
THE A-B-C OF COST ENGINEERING
comparable to the bank account andcheck book.The perpetual inventory does more
than stop shrinkages. Properly con-ducted it will prevent shortages, over-stocking, and encourage a dispositionon the part of employes to recognizevalue in material which otherwise isfrequently handled without consider-ation of the investment involved.
If the owner and employer doesnot place a value on his own propertyit is not likely that his employes willdo better than he.
The Machine Record is useful formaking comparisons of the perform-ances of various processing units ofthe same character. It providesrecords of output for the guidance ofthe estimator. It shows the relationbetween output and capacity. Theclerical effort required to keep it upto date is almost negligible.
The man who has never used acost system, with its auxiliary records,
61
-
8/11/2019 ABC of Cost Engineering
66/116
THE A-B-C OF COST ENGINEERING
cannot appreciate how valuable theymay be. The author believes thathesitation to adopt such systems isgenerally due to either a disinclina-tion to apply one's self to the task oflearning and practicing
newmethods,
or to the fear that admitting that onehas something to learn is an admis-sion of weakness.
We are creatures of habit. After
wehave drilled our minds to follow
certain lines of thought we get intomental ruts. If one is inclined tomental laziness the effort to gettingout of the rut and breaking a newchannel for his thought current isdistasteful.
The man who would prefer to workin the dark, rather than in the light,would be considered a subject for alunacy commission, yet there arehundreds of men in this country whopose as business men, who decline toadopt advanced measures in the faceof the indisputable evidence pre-
62
-
8/11/2019 ABC of Cost Engineering
67/116
THE A-B-C OF COST ENGINEERING
sented by those who have learnedthe advantages of their adoption.The excuses they offer are frequentlyridiculous. One says:
The conditions in my factory areso peculiar that it is impossible tofind the cost of the product. My ownjudgment is my cost system.
Such a statement has about asmuch foundation as the claim thatthe rules of multiplication would notapply to 2x4x15 exactly as well asto 9x9x9 because the factors weredifferent. A cost system that de-pends upon the judgment, the pres-ence, or the health of a single indi-vidual, is unsafe. Another says:
My product must be sold atprices which are already establishedby my competitors, so the cost sys-tem would be useless to me.
This is sheer shortsightedness. Invery few industries are prices estab-lished. There can be no establishedprice in industries whose product is
63
-
8/11/2019 ABC of Cost Engineering
68/116
THE A-B-C OF COST ENGINEERING
made to the specifications of thecustomer. Unprofitable prices arealways subject to change. The proofoffered by a practical cost systemprovides the best possible argumentin advancing prices, as well as ameans of convincing competitors thatchanges are necessary. A third says
My old method of cost accountingis satisfactory because it alwaysshows a profit at the end of the year.
This quotation means nothing tothe man who knows that profit andloss statements are notorious fortheir omissions of economic expenses.Hundreds of concerns that are losingmoney are able to present a statementshowing a profitable period by arbi-trarily disregarding the elements ofdepreciation, interest on investment,and not infrequently the item of rent.
It is easy by such methods to hide aloss of ten per cent of the investedcapital per year, and often more. Onthe basis of a ten per cent loss the
64
-
8/11/2019 ABC of Cost Engineering
69/116
THE A-B-C OF COST ENGINEERING
concern would not be insolvent forten years. Insolvency is usuallycovered up for a period after itoccurs, and the bankrupt concernwill usually show liabilities exceedingits assets by fifty per cent. A busi-ness whose accounting system is sohandled can lose ten per cent peryear for fifteen years and fail, withoutthe management knowing the truecause.
Accounting literature is so full oftheories and personal opinions, lack-ing the support of fundamental prin-ciples, that the accountant respon-sible for the conditions in such casescan probably cite an authority forevery move that he has made.
The establishing of a thoroughCost Engineering system, based upondefinite fundamentals, and buttressedby the auxiliaries of perpetual inven-tory, requisition system, and machinerecords, affords the strongest safe-guards against losses of all kinds.
65
-
8/11/2019 ABC of Cost Engineering
70/116
-
8/11/2019 ABC of Cost Engineering
71/116
THE A-B-C OF COST ENGINEERING
CHAPTER VIISYSTEM AND RED TAPE
System in business is of com-paratively recent origin. In fact if
one is to judge by the evidences thathave survived a century he will findthat orderliness has become a subjectfor consideration almost within thememory of men now living.
Look at the map of any old city,even on this continent, and you willfind in the irregularity of the streets
evidences of lack of system, or plan,
on the part of the mentalities respon-sible for their arrangement.
A lack of orderliness is character-istic of practically all of the activities
of humanity a hundred years ago.Any man in middle age can recallnumerous instances where radicalsteps have been taken to end theconfusion and disorderliness of ruleof thumb methods.
Street numbering systems have
67
-
8/11/2019 ABC of Cost Engineering
72/116
THE A-B-C OF COST ENGINEERING
been changed inmany
ofthe
largecities within the memory of schoolchildren. Standardization of time isa development of recent years,brought about by the necessities ofrapid transportation schedules.
A few cities cling to their old un-systematic methods of numberingstreets. A few stubborn obstruction-ists still refer to sun time as ''God'stime. A few business houses stilluse single entry records of businesstransactions. A few still keep theiraccounts on spindles or hooks wherethe gentle zephyrs of Summer canblow them out of the window andclean the slate for delinquent debtors.
These, and their ilk, are responsiblefor much of the prejudice that existsagainst modernization of business,for the characterization of all system-atic effort as ''red tape. Only theunthinking, however, listen and lose.
The cash register, the credit regis-ter, the adding machine, the mechan-
68
-
8/11/2019 ABC of Cost Engineering
73/116
THE A-B-C OF COST ENGINEERING
ical calculator, and the cost systemhave come to stay. The systematicbusiness is the progressive, growing,profitable business today.
If you have occasion to visit twofactories, and find one of them housedin a dark, dingy building, the yardabout it strewn with scrap and junk,the manager's desk cluttered with ajumble of correspondence; and theother housed in a modern, well-lightedbuilding, with a grass plot in front, ayard free from scrap, an orderly, well-furnished office, a complete filingsystem making it possible for themanager to place his hand on anypaper required without delay, whilehis own desk is free from all papersexcept such of the current day's workas he still has in hand, which wouldyou say was the most desirable.^
If you were to approach the mana-ger of the disorderly factory with aproposition which would help him tobring order out of chaos, which
69
-
8/11/2019 ABC of Cost Engineering
74/116
THE A-B-C OF COST ENGINEERING
would enable him to greatly increasethe profitableness of his business,while at the same time relieving himof much of the detail and confusionof his daily work, he would probablyrespond
bytelling
youthat thread-
bare story about the factory thatwas so busy trying to keep up anelaborate system that its personnelhad no time to make product.
If you were to refer to the condi-tions in the more systematicallyconducted factory, he would prob-ably tell you that his prosperouscompetitor was a flagrant ''price-cutter, whose only aim in life wasto destroy competition. You wouldhowever know the truth: that sys-tematic methods are economicalmethods; that disorderly methodscost more than all the modern equip-ment required in any business.
No doubt some factories have beenover-systematized. Some people go toextremes in everything, and every-
70
-
8/11/2019 ABC of Cost Engineering
75/116
-
8/11/2019 ABC of Cost Engineering
76/116
THE A-B-C OF COST ENGINEERING
clearly-defined track which directsapplied energy toward the goal ofefficiency.
He is an unthinking man who con-fuses system and ''red tape/' Red
tape is useless system the curvesand grades that consume energy outof proportion to the result obtained.
The competent engineer makes acareful survey, and knowing defi-
nitely the desired end, maps out theroute which will get the result withthe least effort. The first cost of agood system may be greater, but itwill prove more economical and
profitable in operation.Denham systems admit no redtape. They are built to get definiteand essential information. Theysucceed because, to our engineers,
costfinding is an exact science. Theyknow by special training and experi-ence what information is essential,and how to obtain it, by the mostdirect methods.
72
-
8/11/2019 ABC of Cost Engineering
77/116
THE A-B-C OF COST ENGINEERING
There is no magic formula thatwill find the cost in all cases. Thereis only the plain facts that the ex-penses of manufacture are definite,in amount, in purpose, and in bene-fit. Product and the operations ofproduction must be analyzed todetermine the elements and propor-tions of the elements of which theyare composed.
Expenses must be analyzed, todetermine their amount, their pur-pose, and the proportions in whichthe operations or items of productionare benefited by each expenditure.
Then each must be applied to theproper item in the exact proportions.Only thus can correct results beobtained.
All of this is governed by certain
fixed and fundamental principleswhich, although until recently un-recognized in cost determination, areas old as justice itself. When therules and principles are known, the
73
-
8/11/2019 ABC of Cost Engineering
78/116
THE A-B-C OF COST ENGINEERING
results are as definite and provable asmathematics. They are mysteriousonly as the unknown is mysterious tothe ignorant. All things are simplewhen known. The better known they
are the simpler they appear.Now, Mr. Manufacturer, isn't it afact that your fear of red tape, yourexcuse for not adopting systems, isnot so much a disbelief in the use
of system as it is a disinclinationto apply yourself to the study ofnew methods, so that you mayadopt that system which will mostefficiently serve your require-
ments; and, further, to the fearthat the system will show you somany weaknesses in your presentmethods that you will be forced tochange your habits of thought and
action.f^
Mental laziness and ignorance areat the bottom of most failures.Mental laziness begets ignorance;ignorance begets fear; fear begets
74
-
8/11/2019 ABC of Cost Engineering
79/116
THE A-B-C OF COST ENGINEERING
inaction, and inaction begets deca-dence; the result is failure.
Knowledge of your business comesthrough a careful analysis of recordsof production and expense. Face the
issue squarely. Know, then act. Sys-tem properly applied is the bestsource of knowledge for the manu-facturer.
75
-
8/11/2019 ABC of Cost Engineering
80/116
Too much censorship over individualityreduces it to mediocrity^ and this is especiallytrue when a brilliant thought or suggestion ispassed upon by a number.
If the idea is slightly modified by each, it
becomes commonplace, weak and conven-tional, and is doomed to blend with the great
mass of the ordinary, In Office.
76
-
8/11/2019 ABC of Cost Engineering
81/116
-
8/11/2019 ABC of Cost Engineering
82/116
-
8/11/2019 ABC of Cost Engineering
83/116
THE A-B-C OF COST ENGINEERING
manufactured or upon the basis ofwhat their competitors are charging.While it is true that supply anddemand are the determining factorsin the price of any particular goodsonce they are placed on the market,cost is the fundamental factor towhich every manufacturer who ex-pects to remain permanently in busi-ness must return as the only soundbasis upon which to figure his prices.
The inadequacy of cost account-ing systems in American factories isastonishing. Many of these systemsare worse than none at all becausethey are misleading. Some havebeen built up in the manufacturer'sown ojQSce and applied by a book-keeper who is not familiar with theprinciples which underlie cost ac-counting. Others have been designedby cost accountants who knew theirbusiness but who were so handi-capped by the instructions of themanufacturer that they could not do
79
-
8/11/2019 ABC of Cost Engineering
84/116
THE A-B-C OF COST ENGINEERING
justice to themselves or to theirclient. * * * *
Every article produced shouldbear its equitable share of all ex-penses, including overhead and sell-ing expenses. There are manufac-turers whose line consists of, say,six articles; on three they are makinga profit and on three they are losingmoney, but claim that these threearticles help to take care of theoverhead expense. This method ofdoing business is most detrimental tohealthy business conditions. Fre-quently one of these articles may bethe sole product of an individual whois striving and struggling to existagainst a firm which is placing thesame article on the market as ameans to help take care of its over-head expense. Surely this is not
wholesome competition. An ade-quate cost system would reveal thisunhealthy condition and make aremedy possible.
80
-
8/11/2019 ABC of Cost Engineering
85/116
THE A-B-C OF COST ENGINEERING
Mr. Hurley has gotten the rightperspective of the situation in con-nection with the worst phase ofAmerican business. He reahzes theinadequacy of cost accounting meth-ods. If he were to take the timeand thought necessary to famiharizehimself with the distinctions betweencost accounting and Cost Engineer-ing, contrasting the arbitrary formu-las and uncertain practices of costaccountants with the fundamentalprinciples upon which Cost Engineer-ing is based, his approval wouldwithout doubt be given to the latter.
At any rate the big work that Mr.Hurley has done in the matter ofstirring the American manufacturersto a realization of the need for bettercostfinding methods is fully appre-ciated. It is to be regretted thatMr. Hurley could not have remainedin the position so vital to the welfareof American industries.
Mr. Hurley wanted uniform meth-
81
-
8/11/2019 ABC of Cost Engineering
86/116
THE A-B-C OF COST ENGINEERING
ods of costfinding adopted by manu-facturers, particularly in the sameline, so that comparisons couldreadily be made. He referred to thisas uniform cost systems. He knewwhat he wanted, but again the un-certainty of terminology in costaccounting caused misunderstanding.The majority of manufacturers havea wrong idea of what constitutes acost system. It is commonly sup-posed to mean a collection of forms,ruled and printed alike for the useof all.
The uniform cost system as Mr.Hurley intended it to be understoodwas not a collection of forms identicalin design, but a uniform usage ofdefinite teachable fundamental prin-ciples such as form the basis of ourmathematical system. To expect allmanufacturers to use the same formof records in their factories would beas foolish as to expect that all mathe-matical problems could be worked
82
-
8/11/2019 ABC of Cost Engineering
87/116
-
8/11/2019 ABC of Cost Engineering
88/116
THE A-B-C OF COST ENGINEERING
nor practical training in their appli-cation. The committee-made costsystem suffers from the same cause,frequently more, because there isalways opportunity for the individual
committeeman to shift the respon-sibility for failure to the shouldersof other members. Not infrequently,the most ignorant members of thecraft are placed upon the cost com-
mittee in the hope that it willstimulate them to study. The suc-cessful members usually take theattitude that they are all right, butthat it is their duty to prepare a
strong dose for the other fellow.The average business man or manu-
facturer has an inborn dislike for thedrudgery of delving into details. Itseems to him a needless expenditure
of energy. He prefers to accept super-ficial generalities rather than try toassimilate accurate, but detailed, pre-sentations of the facts of his business.
When an organization appoints a84
-
8/11/2019 ABC of Cost Engineering
89/116
THE A-B-C OF COST ENGINEERING
committee and commissions it withthe work of devising and recommend-ing a system for cost-finding, it can-not ehminate from the make-up ofthat committee the disincHnation on
the part of its members to drudgerythat has no direct returns, and theirwiUingness to adopt the impractical,in order that they may present areport which will indicate that the
committee has not been idle.The members of the committee,being at sea as to what constitutesreal cost-finding, have a vague ideathat somehow or other there ought
to be a means by which records ofproduct and expenses are gottentogether, so that expense is appliedto product. As a rule they consolethemselves with the oft-repeated
though erroneous statement that any method used is necessarilyarbitrary, and consequently it re-quires simply an agreement uponsome one method, and all will be well.
85
-
8/11/2019 ABC of Cost Engineering
90/116
THE A-B-C OF COST ENGINEERING
Inasmuch as none of the membersof the committee have practicalknowledge of the principles of CostEngineering there is no means ofproving that their conclusions are
either right or wrong, and the so-called ''system is readily adopted.
Rarely, if ever, does a cost com-mittee really devise either methodsor forms. It usually meets about a
table to consider a hodge-podge ofprinted forms and data collected frommany sources, and undertakes topiece together a group of unrelatedforms and methods. Often some
member with a pet hobby insistsupon the inclusion of his idea as acompromise before he will agree withthe rest as to the complete report.The committee having agreed, pre-
sents its report to the organization.The fact that the members of theorganization are not better informedas to principles than was the com-mittee, renders it unlikely that there
86
-
8/11/2019 ABC of Cost Engineering
91/116
THE A-B-C OF COST ENGINEERING
will be any serious objection toadopting and recommending the sys-tem. The situation is not unhke theinstance of a httle girl who, whenmaking strange marks on a piece of
paper, was asked by her mother as totheir purpose. She said, '*I am writinga letter to Lillie Smith. But, mydear, laughed the mother, ''y^^ don'tknow how to write. O, that doesn'tmatter, mother, she replied, Lilliedoesn't know how to read.
It is unfortunate for manufac-turers that their committees are soready to offer them impractical meth-ods, for the organization, generally,has faith in its committee, and backsit up by its unqualified endorsement,and the laymen then assume that thework has been properly done, notonly giving it full credit, but dis-crediting and opposing anyone whodiffers with the conclusions of thecommittee, or the recommendationsof the organization.
87
-
8/11/2019 ABC of Cost Engineering
92/116
-
8/11/2019 ABC of Cost Engineering
93/116
THE A-B-C OF COST ENGINEERING
ject is less practical, however compe-tent or successful they may be intheir particular callings.
To those organizations which areinterested in a movement for deter-
mining cost of production in theirparticular field, the author suggeststhat they appoint committees, notto devise cost systems, but to investi-gate the merits of the various meth-
ods alreadyin use,
and insteadof
undertaking to accomplish results bytaking the work in their own handsfoster the competitive developmentof cost-finding methods without ex-pense to their organization, throughdemanding the best possible methodswhich can be devised and installedby commercial concerns.
To such committees is offeredfreely every available means of in-vestigating the merits of DenhamCost Engineering Service and com-paring it with any other which maybe available.
89
-
8/11/2019 ABC of Cost Engineering
94/116
A vicious cause of inefficiency is indiffer-ence to the necessity for proper equipment.
A director who would not think of demandingthat his workmen produce machine productwithout first providing machines, will thought-
lessly demand efficient results from a managerwhile refusing to authorize the installation of
a modern Cost Engineering system. The
cost system is simply managerial equipment,
without which the manager's efforts are mini-
mized.
dO
-
8/11/2019 ABC of Cost Engineering
95/116
THE A-B-C OF COST ENGINEERING
CHAPTER IXSEVENTEEN REASONS WHY
DENHAM COST ENGINEERING SYS-TEMS ARE SUPERIOR TO ALL
OTHERS
1. Because Denham systems areaccurate, comprehensive, elastic,simple, logical, provable, satisfactory
and permanent.2. Because Denham systems em-
brace the solution of the problem ofdistributing the so-called ''overhead
or indirect expenses of manufacture.No other method does this.
3. Because Denham systems donot depend upon personal opinionsor theories, but are the result of theintelligent application of definitely
known principles, as fundamental asthe law of gravitation.
4. Because with a Denham systemone customer or item cannot possiblybe charged with a cent of expenseproperly chargeable to another. Nor
91
-
8/11/2019 ABC of Cost Engineering
96/116
THE A-B-C OF COST ENGINEERING
can a cent be omitted. Justice is itskeynote.5. Because Denham systems are
the result of applying common senseto the cost problem. No other meth-
ods will stand the test of logicalanalysis.
6. Because Denham systems arethe result of many years of special-ized study and experience in thescientific
applicationof
individualexpenses through individual produc-tive operations to individual itemsof product. No other systems ap-proach them in either accuracy orsimplicity.
7. Because in an analytical com-parison of Denham systems with theordinary type of
*
'prime cost andoverhead or percentage system thelatter is proven to be ridiculous inpractice, and its use due to eitherignorance or indifference.
8. Because through Denham sys-tems cost can be determined in a
92
-
8/11/2019 ABC of Cost Engineering
97/116
THE A-B-C OF COST ENGINEERING
provable manner with less clericaleffort than is usually required tooperate the inferior misleading sys-
tems.9. Because Denham systems are
installed by engineers whoare first
selected because of their intimateknowledge of and thorough experi-ence with factory operations and prob-lems; and then trained carefully in theapplication and teaching of the funda-mental principles of cost-finding.
10. Because by solving conclusivelythe problem of expense distribution,costfinding has become practically anexact science. Denham systems leaveno opportunity for doubt as toaccuracy.
11. Because the Denham Cost-finding Company backs up its serviceto the limit. Not only making a com-plete and efficient installation, butkeeping in touch with its clients sothat new problems are easily andcorrectly solved.
93
-
8/11/2019 ABC of Cost Engineering
98/116
-
8/11/2019 ABC of Cost Engineering
99/116
-
8/11/2019 ABC of Cost Engineering
100/116
The outlay for installation of a Cost Engi-neering system is of small importance com-pared to the greater profits that will result
from its practical use.
The best is always the most economical.
96
-
8/11/2019 ABC of Cost Engineering
101/116
THE A-B-C OF COST ENGINEERING
CHAPTER XINFORMATION ABOUT DENHAM
COST ENGINEERING SERVICE
Denham Cost Engineering Service
was established in 1908. Installingorganizations, under district man-agers, are maintained at Cleveland,
Philadelphia and Chicago. All con-tracts for service are made with TheDenham Costfinding Company,(Ohio) at Cleveland.
Extent of Service
Installations have been made inapproximately seven hundred fac-tories. The territory served includesall of the industrial states within the
United States, and extends into
Canada. Concerns operating underDenham Systems are located in overone hundred cities, from Boston toSan Francisco.
.97
-
8/11/2019 ABC of Cost Engineering
102/116
-
8/11/2019 ABC of Cost Engineering
103/116
THE A-B-C OF COST ENGINEERING
Optical Goods
Paper BagsPaper BoxesPaper CansPaper TubesPaper, ToiletPaper, WaxedPhoto AlbumsPhoto EngravingsPinsPiston RingsPrintingPrinting PressesPublishersRubber GoodsRubber Jar Rings
Rubber TiresSales BooksSpectaclesStampingsStationery
Steam CookersSteel and Copper Plate
EngravingSteel and Copper Plate
PrintingSteel FurnitureSteel RangesStep LaddersStovesSurveying InstrumentsToilet PaperToolsTractorsTransmission MachineryVarnishVarnish Stains
Wax PaperWind ShieldsWireWire Screen ClothWoodenware
Period of Service
The period through which CostEngineering Service is required variesfrom three months in small factoriesto six months or more in large fac-tories, depending upon the problemspresented by the individual cases,the class of help employed, and thedegree of co-operation given to theengineers doing the work.
99
-
8/11/2019 ABC of Cost Engineering
104/116
THE A-B-C OF COST ENGINEERING
The term, as expressed in months,does not mean either that the serviceis hmited to that time according tothe calendar, or that the engineerdevotes his time exclusively to thatcontract for the period. For example:
In the case of a three months in-stallation period, the system is to beoperated for three months under thesupervision of our engineer. Theperiod of planning, preceding theactual operation; and the time re-quired to complete the summariza-tion of the records and expenses forthe third month, after the close ofthe third month's records, necessi-tates a total period of approximatelyfifteen weeks. A four, five, or sixmonths installation will require rela-tively longer preliminary and com-pletion periods, so that the actual
time from beginning the plan to thefinished records, on a six months'contract will be approximately sevenmonths.
100
-
8/11/2019 ABC of Cost Engineering
105/116
THE A-B-c OF COST eng1n: e;ejhng >^
Theengineer's presence : 15 'ajc^t;
required constantly for the full time.
He is permitted to use his discretionas to the time when he shall bepresent, but the Company guaran-tees that the service shall be efficient,and the system installed shall beboth practical and complete.
Fees for Service
A personal inspection of the fac-tory is necessary before a definitequotation can be made. The totalfee is always specified in the contract.We do not make installations at perdiem rates. The Company guaran-tees complete and practical systemsefficiently installed for the fee stipu-lated.
This plan safeguards the client aswell as the standing of the service.
We cannot, by slowing up, increasethe expense of installation, nor canthe client through a mistaken impres-sion, or false economy, stop the in-
101
-
8/11/2019 ABC of Cost Engineering
106/116
; T HE r^^pr^. OF COST ENGINEERING
stailktion 'in the belief that his par-tially trained employes can completethe service alone. Such action couldonly result in failure and dissatisfac-tion detrimental to both.
A guaranteed service at a stipu-lated fee is the only practicable planfor this type of service. Experiencehas proven it most satisfactory inthe seven hundred cases which we
have served.
How To Get Service
Write to The Denham CostfindingCompany, Cleveland, Ohio, askingthem to have a representative callupon you. This call does not obligateyou to engage the service unless youare convinced that it will proveprofitable.
The representative, either a dis-trict manager or the chief engineer,will visit you, look over your factory,discuss with you the methods of
102
-
8/11/2019 ABC of Cost Engineering
107/116
-
8/11/2019 ABC of Cost Engineering
108/116
THE A-B-C OF COST ENGINEERING
made system, or have none, it willpay you in largely increased profitsto avail yourself of this offer.
No Financial Obligation UnlessYou Order
Remember, we will send a repre-sentative to any point within therange of our installing organizations,upon the request of an executive ofany factory employing fifty or morepeople. (In certain localities we canhandle smaller cases.) There is noobligation involved, except to giveour representative a prompt hearingand our proposition earnest consider-ation. Write today.
The Denham Costfinding Co.Cleveland, Ohio
104
-
8/11/2019 ABC of Cost Engineering
109/116
The Denham Costfinding Co.,Cleveland, Ohio
Please have your representative call onus to discuss the value of a Cost Engineer-
ingSystem
in connection with the opera-
tion of our business.
This request involves no obligation
except to give him an interview promptlyand to seriously consider the advantage of
your proposition.
Time of call preferred
Very truly yours.
Official Title
Should be signed by General Manager orCorporation officer.
105
-
8/11/2019 ABC of Cost Engineering
110/116
-
8/11/2019 ABC of Cost Engineering
111/116
COST ENGINEERING SERVICE The Denham Costfinding Co. of
Cleveland, Ohio, provides Cost
Engineering Service for the plan-
ning and installation of Cost
Engineering Systems in Factories.
Six hundred users in over one
hundred cities of the United States
and Canada attest the practica-
bility and profitableness of theservice. A representative will besent on request.
THE DENHAM COSTFINDING CO.
COST ENGINEERSSLOAN BUILDING, CLEVELAND
-
8/11/2019 ABC of Cost Engineering
112/116
BOOKSBYROBERT S. DENHAM
PRACTICAL COST ENGINEERINGCovers the philosophy of Cost Engineering
with detailed exposition of the application
of the Principles and Rules of Cost Engi-neering Practice. A book for the manufac-turer or student.
Buckram, 300 pages^ $10.00 per copy4f ^ ^
FUNDAMENTALS OF COST ANDPROFIT CALCULATION
A vigorous discussion of the vital elementsof business. A book every man engagedin active business in any capacity can readwith interest and profit.
Cloth, 120 pages, $1.00 per copy
-
8/11/2019 ABC of Cost Engineering
113/116
-
8/11/2019 ABC of Cost Engineering
114/116
o^^^^^^^^^^^^^r jp- ^^^^^^^^H ^ri d
^^^H s- :?=^ 8-73 1^^^K ai N| eturnto
ok
is
DU^^^^^^^B
^^^^^H o 2^^^^^^^^^^R Jr-S 2
'^to-
ft- s.
p3
I'
cro
o
-
8/11/2019 ABC of Cost Engineering
115/116
YA 02525
415470
UNIVERSITY OF CAUFORNIA LIBRARY
-
8/11/2019 ABC of Cost Engineering
116/116