ABB Pneumatic Transmitters
Transcript of ABB Pneumatic Transmitters
-
7/30/2019 ABB Pneumatic Transmitters
1/4
SS-2-6 T-109
Specifications 330T Series Pneumatic Gauge and
Differential Pressure Transmitters
nn 2 Year Warranty
nn 0.35% accuracy
nn Low air consumption
nn Field-proven instrument
nn Common secondary construction
nn Unitized relay with push-to-clean orifice
nn Light-weight
nn Non-interacting span and zero
This is a force-balanced instrument transmitting 3 to
15 psig (20 to 100 kPa) signals proportional togauge or differential pressure.
These transmitters offer precise measurement,
reliable performance, and easy installation and
maintenance.
PERFORMANCE SPECIFICATIONS
Output
20 to 100 kPa (3 to 15 psi)
Air Supply
140 - 155 kPa (20 - 22 psig) recommended
125 kPa (18 psig) minimum
175 kPa (25 psig) maximum
Warning: Use of a supply gas other than air can create a
hazardous environment because o small amount of gas
continuously vents to atmosphere.
Air Consumption
0.34m
3
/hr (0.2 scfm)Zero Elevation and Suppression
Elevation and suppression spring furnished on all models
Gauge (F): Max. Elevation Max. Suppression
Catalog No. kPa psig kPa psig
332T -101.3 -14.7 970 140
333T -101.3 -14.7 4800 700
Differential (D): Max. Elevation Max. Suppression
Catalog No. kPa psig kPa psig
332T -700 -100 970 140
333T -3500 -500 4800 700
Upper Range Limit
Catalog No. kPa psig
332T 1000 150
333T 5200 750
(20 kPa) Zero (3 psig Output)
Max. Elevation Max. Suppression
Catalog No. kPa psig kPa psig
334T -100 -14.7 19 600 2800
335T -100 -14.7 36 000 5400
336T -100 -14.7 126 000 18,000
Upper Range Limit 15 psig (100 kPa) Output
Catalog No. kPa psig
334T 14 000 2000
335T 40 000 6000
336T 140 000 20,000
Vacuum Service Full Vacuum
Maximum Overrange Pressure
332T 1400 kPa (200 psig)
333T 7000 kPa (1000 psig)
334T 28 000 kPa (4000 psig)
335T 40 000 kPa (6000 psig)
336T 140 000 kPa (20,000 psig)
Maximum Static Pressure
332TD 14 000 kPa (2000 psig)
333TD 14 000 kPa (2000 psig)
Operating Temperature
Secondary -40to 82C (-40to 180F)
Primary -40to 177C (-40to 350F)
Storage Temperature
-68to 82C (-90to 180F)
Accuracy
Calibration capability better than 0.35% of Zero-based span.
Includes conformity, hysteresis, and repeatability.
Transmitters factory-calibrated better than 0.35% of span.
(Note: 335T above 3000 psi and 336T above 15,000 psispans are 1% accuracy.)
Repeatability
0.1% to 0.2% of span depending on model selected.
Mounting Position
Universal; however, rezeroing may be required with some
orientations.
ABB Instrumentation
-
7/30/2019 ABB Pneumatic Transmitters
2/4
SS-2-6 T-110
PHYSICAL SPECIFICATIONS
Air Supply and Output Connections
1/4 internal NPT
Weight
332T and 333T - 2.7kg (6 lb)
334T, 335T, and 336T - 1.8 kg (4 lb)
Process Connections
332. 333T 1/2 in. internal NPT
334T. 335T. 336T 1/4 in. internal NPT
GasketTeflon1Silicate - ceramic filled
Housing
Corrosion-resistant, die-cast aluminum with baked enamel
finish; fiberglass cover optional.
Mounting Bracket
Carbon steel universal mount for pipe mounting 30mm to
50mm (1 1/4 to 2 in.) or surface mounting.
NACE (National Association of Corrosion Engineers)
Interpretation of NACE Specification MR 01-75, latest revision, is
that it applies only to process-wetted parts. Therefore, only the
diaphragm, flanges and fittings, and adapters conform to this
specification when the NACE form of transmitter is ordered. Bolts
are not included since they are not process-wetted in normal
usage.
All accessories may be ordered with NACE form of transmitter
except SIS-172.
1Trademark of E. I. du Pont de Nemours & Co., Inc.
DIMENSIONS (332TD, 333TD)
DIMENSIONS (334T, 335TF, 336TF)
Catalog No. B C
334TF, 335T 5-9/16 5/8
336TF 6-15/32 11/16
-
7/30/2019 ABB Pneumatic Transmitters
3/4
SS-2-6 T-111
ORDERING INFORMATION330T SERIES PNEUMATIC GAUGE AND DIFFERENTIAL PRESSURE TRANSMITTER
1.Select one character or set of characters from each category and specify complete catalog number as per sample below.
2.Specify tagging if required. Tagging information can be provided on the exterior stainless steel plate
3.Specify calibration in psi or kPa.
Code No. Description
BASE NUMBER - 1st thru 4th characters
332T Span adjustable from 70 to 700 kPa (10 to 100 psi)
333T Span adjustable from 350 to 3500 kPa (50 to 500 psi)
334T Span adjustable from 1400 to 14 000 kPa (200 to 2000 psi)
335T Span adjustable from 4000 to 40 000 kPa (600 to 6000 psi)336T 00882 only Span adjustable from 14 000 to 140 000 kPa (2000 to 20 000 psi)
ACTUATION - 5th character
D Differential pressure (two inputs). For 332TD and 333TD only.
F Gauge pressure (one input)
PROCESS WETTED MATERIAL - 6th thru 8th characters
000 NACE form: Hastelloy C1/316L SST for 332T (D, F) and 333T (D, F) only.
Hastelloy C diaphragm, 17-4 pH SST body, Type 321 SST trim for 334TF and 335TF only.
See NACE note for forms available
002 316 SST - for 332T (D, F), 333T (D, F), 334TF, and 335TF only
003 Hastelloy C - for 332TF or 333TF only
008 Type 17-4 pH SST - for 336T only
PROCESS CONNECTION MATERIAL - 9th character2 316 SST; 332T (D, F), 333T (D, F), 334TF, 335TF only
3 Hastelloy C - for 332TF and 333TF only
8 Type 17-4 pH SST - for 334TF, 335TF, 336TF only
PROCESS CONNECTION - 10th character
1 1/2 in. internal NPT - for 332T (D, F) and 333T (D, F) only
2 1/4 in. internal NPT - for 334TF, 335TF, and 336TF only
333TF00221 SAMPLE CATALOG NUMBER
ACCESSORIES
Add after catalog number. Example: 333TF00221(103)
(103)- (111) Air Setsrefer to Price Sheet 7-1B.
(283)-(287) Air Sets
NOTE: NACE forms available are:
332TF00021 or 031
332TD00021
333TF00021 or 031
333TD00021
334TF00082
335TF00082
(146) Mounting Bracket- Universal type, carbon steel. Includes U-bolts for 30 to 50 mm (1-1/4 to 2 in.) pipe or
surface mounting
(277) Fiberglass reinforced cover and epoxy-coated subbase
(278) Fiberglass reinforced cover only
SIS-172 Oxygen Service: cleaning, calibration, and packaging to ABB Instrumentation Standards
(Not available on 334T, 335T, 336T or any NACE forms)
SIS-174 Safety blowout discon secondary
SIS-177 Case purge45P1098H Metal Identification Plate (316 sst tagging)
1Trademark of Haynes International, Inc.
-
7/30/2019 ABB Pneumatic Transmitters
4/4
SS-2-6 T-112
The Companys policy is one of continuous product
improvement and the right is reserved to modify
specifications contained herein without notice.
1996 ABB Instrumentation
SS-2-6 96.11
ABB Kent-Taylor Ltd. ABB Instrumentation Inc. ABB Kent-Taylor SpA
St. Neots Cambs. P.O. Box 20550 22016 Lenno
England, PE19 3EU Rochester, New York 14602-0550 Como, Italy
Tel: (01480) 475321 Tel: (716) 292-6050 Tel: (0344) 58111
Fax: (01480) 217948 Fax: (716) 273-6207 Fax: (0344) 56278