ABB TODAY · full-day service seminar held at ABB’s ... a copper dust suction system for ... An...
Transcript of ABB TODAY · full-day service seminar held at ABB’s ... a copper dust suction system for ... An...
ABB TODAYThe customer magazine of ABB in Singapore
Driving sustainable growth
Sharing knowledge about the latest in service and maintenancePage 4
ABB congratulates SPH for the launch of the upgrading and renewal project at Print CentrePage 6
The ACS 2000 medium voltage driveEasy and reliable installation Page 8
First use of robot in Southeast Asia’s wood industry to increase productivity and lower carbon footprint Page 12
MICA (P) 018/02/2010
Issue 13May 2010
Prototypes of ABB’s charging points for electric vehicles were showcased at the International
Geneva Motor Show 2010.Story on page 5
About ABBABB (www.abb.com) is a leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. The ABB Group of companies operates in around 100 countries and employs about 117,000 people.
DisclaimerThe information contained herein reflects the views of the authors and is for information purposes only. Readers should not act upon the information contained herein without seeking professional advice. We make publications available with the understanding that the authors are not rendering technical or other professional advice or opinions on specific facts or matters and assume no liability whatsoever in connection with their use. The companies of the ABB Group do not make any warranty or guarantee, or promise, expressed or implied, concerning the content and accuracy of the views expressed herein.
Printed on 100% recycled paper. Please recycle this magazine.
ABB TodayIssue 13 May 2010The customer magazine of ABB in Singaporewww.abb.com.sg
Published by marketing and corporate communicationseditorial team: Emely Tan, Sally Chye, Goh Ying Hua, and Joey Chiang
ABB in Singapore 3
Highlights 4-6
ABB channel partners 7
Product news 8-9
Features 10-13
Success stories 14-15
Training 16-17
Partners network 18-19Almost half of 2010 has gone by, and I hope you have had a good
year so far. For the Low Voltage Products (LP) division, this year
has been an exciting one.
We are focusing on improving our understanding of the market in
order to serve our customers better.
We have also made improvements on our upstream selling,
sales to market, and last but not least, to our internal processes,
especially on our commitment to improve stock availability. It is
important our customers find it easy to do business with ABB.
In order to demonstrate how ABB’s technologies can achieve
energy efficiency within offices and homes, we have recently set-
up a small lighting and building control room within our premises.
Do feel free to contact our team for a visit. Energy efficiency is a
key growth driver, and green buildings are important in optimizing
our energy use. ABB has a lot to offer for energy and process
efficiency.
ABB is also identifying new growth opportunities, and many of
you may be aware of the division realignment for our automation
businesses at the beginning of 2010. It has allowed us to focus
intensely on businesses with similar technologies, channels to
market, and service models. These changes will enable us to
bring our total offering to our customers more easily, and again,
reflects our ambition to be more responsive to market needs.
We value our customers, channel partners and various
stakeholders, and as ABB achieves sustainable growth, we
also want our stakeholders to grow together with us. Let’s strive
further and see what we can accomplish for what I think will be a
rewarding 2010.
Achieving growth together
Isabel Chong
Vice President of ABB’s Low Voltage Products division in Singapore
ABB in Singapore
have helped prove that we can compete in
a tough market.
As we focus on building strong business
fundamentals and increasing our
competiveness, I believe ABB will be a
strong and agile leader. I am appreciative
of our customers who have put their
faith in us. Many of us are in late-cycle
businesses, and we will not sense the
economic recovery as quickly. While we
strive to achieve better results for the
remaining year, let us take time to build a
stronger better relationship, and look for
opportunities to improve the way we do
business.
Gearing for sustainable growth
The economy seems to be in a recovery
phase. While this is something to be
hopeful about, I think we have learnt at the
start of the recession that we cannot be
waiting for economic growth to return. We
have been acting to create growth, and
looking for ways to improve our market
approach.
ABB has always been leading in
technology, and we are aligning our
innovations with key growth drivers, like
climate change and industrial productivity.
A number of products targeted to specific
opportunities, like solar inverters, energy-
management software, SVC Light for
smart grid applications, and a new robot
tailored to discrete manufacturing have
been launched. Our highly experienced
engineers are also lending their expertise
to the service market, and can provide
greater support to ABB’s products and
systems. Targeting both organic and
inorganic growth, ABB has also made
three acquisitions this year to fill some
gaps in our offering.
In Singapore, we also made several bold
decisions during a challenging economic
environment. We have refurbished our low
voltage systems workshop and customer
center, to improve operations and better
showcase our portfolio. We are also
looking forward to the setup of a Robotics
Application Center by the third quarter, to
support the needs of emerging markets,
and specialized high-end manufacturing
industries. We’ve increased our focus
on customer service, and aim to be
a company that our customers enjoy
working with.
Globally, ABB has created a centralized
marketing and customer solutions unit
that will help us cultivate a culture and
commitment to serving our customers
better, help consolidate our efforts in key
vertical markets, and seek further growth in
emerging economies.
We are excited about possible business
opportunities, and as a company, we
have never been so open to change. Our
employees have made immense efforts to
ensure we stay ahead in the markets, and
James Foo
President and Country Manager
ABB in Singapore
3
85 customers from industry segments like oil and gas, petrochemicals, shipyard, building and construction, power, electronics, food and beverage, transportation, pharmaceuticals, and environmental management attended the full-day service seminar held at ABB’s customer center at Ayer Rajah Crescent.
Sebastian Chia, ABB’s service manager for low voltage products, delivered the welcome address. He said that the session is aimed at helping our customers make an evaluation of what services are needed, or must be practiced, in order to enhance the value of service to business, and help
ABB officially opened its newly
renovated low-voltage systems
workshop in January. The new
workshop has enhanced safety
features, like lifelines secured at the
ceiling for working at height, and
a copper dust suction system for
a cleaner healthier environment. A
leveled floor helps ensure accuracy
and quality of production, while a
Vendor Managed Inventory (VMI)
system has been put in place for
efficient replenishment of materials.
generate profits. He added that ABB’s experienced service engineers are ready to explain and assist those that have specific needs.
The key seminar topic for the day was “Reliability, availability, maintainability and safety issues with low voltage switchgear and motor control center”.
David Stonebridge, from ABB in Australia, and Gunnar Zank, from ABB in Singapore addressed actual issues with low-voltage switchgears that will impact plant personnel in different ways. Besides sharing on the problems, David
also shared on solutions to end-users and project design engineers.
To have a better understanding of ABB’s capabilities, attendees were also brought to the drives service, medium-voltage assembly, and the low-voltage systems workshops.
Besides increasing the awareness of problems that may occur as a result of insufficient service and maintenance, attendees also learnt about areas relevant to their work, like energy efficiency applications and case studies, and arc flash prevention.
Highlights
4
Sharing knowledge about the latest in service and maintenance
Low Voltage Systems inaugurates newly renovated workshop
ABB in Singapore shared with engineers and business leaders in power and automation industries about product
lifecycle improvement technologies and their measureable benefits on business productivity, during a seminar
held on April 22.
ABB in Singapore
5
ABB’s direct current (DC) fast-charging station concept was revealed to the public for the first time, appearing together with the “LAMPO 2”, an electric sports car prototype from Protoscar, at the joint stand of leading energy company Alpiq, and Swiss electric vehicle advocacy group ‘e-mobile’.
An alternating current (AC) charging pole prototype by ABB was featured at the Rinspeed stand, together with the “UC?”,
Highlights
5
ABB’s charging stations featured at international motor show
To be released as a product in the near future,
ABB’s DC fast-charging station concept is
capable of up to 100 kilowatts charging with a
compatible car, allowing a recharge of more than
a 100-kilometer range in less than 10 minutes.
ABB was one of the major exhibitors at Hanover Fair 2010. The theme of ABB’s exhibit was “We
make climate change possible”
ABB presented a new sensor, which can
feed itself with power.
With accuracy and precise timing, an ABB
robot performed together with a cellist at the
fair’s official opening ceremony.
An interactive smart grids exhibit was the
major attraction at the booth. Rainer Brüderle,
the German minister of economic affairs and
Annette Schavan, minister for education and
research visited ABB’s booth to learn about
ABB’s products and systems for an intelligent
power grid.
a lightweight two-seater electric urban commuter car developed by Rinspeed. This example of an AC charging pole concept is intended for top-ups in public areas like carparks.
The prototypes of the charging points for electric vehicles are part of ABB’s research into grid infrastructure technology. ABB has a broad portfolio of products and systems required to build and operate a smart grid, which includes intelligent
Prototypes of ABB’s charging points for electric vehicles were showcased at the International Geneva Motor Show 2010, an important annual international exhibition for the world’s automakers.
power management, and the integration of intermittent renewable energy sources to the grid.
The current grid infrastructure cannot provide fast-charging options, and ABB’s prototypes of charging points for electric vehicles can be part of a smart grid infrastructure that can support a higher adoption of electric cars without destabilizing the power grid.
An electric vehicle connected to ABB’s DC fast-charging station.
ABB at Hanover Fair 2010: Key highlightsHanover Fair (better known by its
German name, Hannover Messe)
is the world’s leading showcase
for industrial technology.
Established 60 years ago, it is
considered the best showplace
for industrial technologies,
materials and product ideas.
6
Besides showcasing ABB’s products, solutions and services to the Brunei market, the event provided a platform for networking amongst key stakeholders. Customers had the opportunity to develop an indepth understanding of some of ABB’s leading technologies via the technical seminars held by ABB’s speakers from Singapore, Malaysia and China. Attendees included contractors, consultants, end-users and utility providers.
During the opening ceremony, the Market Manager for ABB in Brunei,
ABB was represented by Wolfgang Felber, OCS Systems manager, and James Foo, country manager for ABB in Singapore, together with Chang Thai Nam, ABB’s manager for Discrete Automation and Motion division in Singapore, and Tey GeeOoi, account manager for SPH.
Yeoh Soon Teong, thanked the guests for their valuable support. Yeoh took the opportunity to introduce four of ABB’s channel partners in Brunei: Syarikat Letrik Bumimaju, Intan Electric Company, MecTech Engineering, and Tendrill.
Tendrill Managing Partner, Pg Irwan Bin Pg Salleh AB Rahaman, thanked everyone for making the event a success, and reinforced Tendrill’s partnership with ABB, by adding that Tendrill is investing in new facilities and people with ABB, and looks forward to a long term business relationship.
During the event, Marketing Manager Lim Say Leong presented ABB’s research
and technological achievements in various industries. He also shared about ABB’s energy efficient technologies and renewable energy portfolio.
There was also an exhibition of featured products and sample displays of electrical wiring accessories, the ComfortTouch and priOn, arc guard systems, motor and Relion protection relays, solutions on power generation and ABB’s power management system (ENMC and substation automation system).
After the event, attendees were interested to know more about ABB’s control systems, instrumentation, low-voltage switchgears and transformers.
ABB establishes greater market presence in Brunei
ABB congratulates SPH for the launch of the upgrading and renewal project at Print Centre
ABB jointly organized a Customer
Day with channel partner Tendrill in
Brunei on March 23 and 25.
ABB joined Singapore Press Holdings (SPH) to celebrate the launch of the upgrading and renewal project at
Print Centre (URPC) on April 13. The launch was officiated by the Chairman of SPH, Dr Tony Tan. SPH held an
appreciation dinner in the evening to thank its various partners and ABB.
Work stations enabled attendees to touch
and feel the products as well as discuss key
features with the presenters.
The launch was attended by top industry leaders. From left, CEO of GOSS International, Jochen
Meissner, President of Agfa Graphics, Stefaan Vanhooren, SPH’s Executive Vice-President of
Production, Anthony Cheng, Chairman of SPH, Dr Tony Tan, Chairman of Harland Simon, Roy
Ashman, and Country Manager of ABB in Singapore, James Foo.
James Foo (left), ABB’s country manager in
Singapore, congratulating SPH’s CEO, Alan
Chan. With them is Anthony Cheng, SPH’s
executive vice-president of production.
Highlights
The upgrading project which began in April 2009 takes place in three phases and is expected to be completed by middle of 2011. SPH continually improves their print products and facilities, to provide faster, brighter and better newspaper prints.
ABB is helping to retrofit controls and automation systems on SPH’s four Goss Colorliner newspaper printing presses.
Market Manager for ABB in Brunei, Yeoh Soon
Teong, presenting a token of appreciation to
Tendrill Managing Partner, Pg Irwan Bin Pg
Salleh AB Rahaman.
The event was a great platform for attendees
to understand ABB’s offerings and product
solutions.
77
ABB channel partners
Leaptron Engineering Leaptron Engineering is one of ABB’s newly appointed channel partners for our Programmable Logic Controllers
(PLCs). The company’s history can be traced back to the year 2002, when the world economic downturn had
forced many companies to close or realign business strategies. In order to face new challenges, Leaptron was
set up. Differentiated from other companies in terms of culture, product and service offerings and positioning,
Leaptron strives to create long term business partnerships, instead of focusing on short term business growth.
Alex Peck, Director of Gennal Engineering
receiving an Achiever award from Chang Thai
Nam, ABB’s manager of Discrete Automation
and Motion division in Singapore.
Dickson Lim from HLC enterprises, receiving a
new channel partner token from Isabel Chong,
ABB’s manager of Low Voltage Products
division in Singapore.
OTTO Electrical and Security Services, Tay
Chin Hui receiving an Outstanding award from
Lim Chin Oon, ABB’s manager of Discrete
Automation and Motion division in South Asia.
ABB adds five new channel partners during Partner Recognition DayABB hosted a thank-you dinner for channel partners during the annual Partner Recognition Day, held at the
Seventh Storey Seafood Restaurant at Marina Barrage.
A major turn for the company happened in the year 2005 when they were acquired by ISDN Holdings Ltd. Since then, Leaptron was able to expand their business into other regions while retaining their culture and differentiated product and service offering. This acquisition has strengthened Leaptron’s position to become one of the leading providers of industrial automation solutions.
Technology, together with human focus, is propelling Leaptron’s growth. The company focuses on technological products that will help solve industrial problems and bring value to people. The
company focuses on development, co-developments with partners, training and customization to strengthen and reinforce the working relationship, as part of Leaptron’s goal to become a partner, and not just a customer. Leaptron aims to be the leader in providing total solutions in industrial automation, specifically in the field of Control Automation for Motion Control, Vision and I/O.
Peter Wong, managing director of Leaptron Engineering says, “We are proud to be associated with ABB as distributor for their range of PLC products. As one of the world’s leading
engineering company, ABB is able to provide top-quality products, a platform for our customers to implement innovative automation solutions, surpassing our customers’ requirements and needs.” Peter added, “Working closely with ABB has also given us great confidence and ability to fulfill our customers to our best abilities. Together, the range of reliable and proven products and solutions offering is a reflection of today’s industries’ dynamic demands and our commitment to be number one provider in this region.”
Peter Wong and his team at Leaptron.
Peter Wong, second from right, at ABB’s recent
Partner Recognition Day in February.
With him is Lim Chin Oon, ABB’s region
manager for Discrete Automation and Motion
division, Isabel Chong, Manager of ABB’s Low
Voltage Products division in Singapore, and
Steve Foong, sales engineer for Programmable
Logic Controllers in ABB.
Product news
8
The ACS 2000 medium voltage driveEasy and reliable installation
PVS800 solar central inverters100 kW to 500 kW
The ACS 2000 general purpose drive provides simple and reliable motor
control for a wide range of applications. It is designed for high reliability,
easy installation and fast commissioning, reducing the total cost of
ownership.
Key features:
• Suitable for use with or without an input isolation transformer • Direct-to-line connection (transformerless) provides lowest cost of ownership • Active Front End (AFE) for minimal line side harmonics with power factor correction and regeneration • Simple drive system integration • Three in - three out cabling technique for quick and easy installation • Suitable for new or existing induction motors • High reliability and low maintenance costs • Precise and reliable process control with Direct Torque Control (DTC)
Highlights
• High efficiency and long operating life• Modular and compact product design• Extensive DC and AC side protection• Power factor compensation as standard
Case study
Jura Cement, Switzerland’s second largest cement producer, replaced a 25-year old cascade converter with a variable speed drive from ABB. The ACS 2000, rated at 550 kW, controls the clinker cooler exhaust fan of Jura Cement’s plant in Wildegg, Switzerland.
Besides quick installation and commissioning, Jura Cement experienced the following benefits:• Higher availability • Reduced maintenance costs including no need to change carbon brushes
• Reduced spare parts stock • Fast installation and commissioning • Reduced energy consumption – estimated about 20% • Wider range of speed control – from 0 to 1000 rpm
“We can easily recover the investment cost of the drive from energy saving alone,” says Jura Cement’s plant electrical engineer Jürg Hitz. “This drive works 24 hours a day, therefore payback will be rapid.”
The heart of a photovoltaic power
plant is the efficient inverter. It
changes the direct current generated
by the photovoltaic module into a
high-quality and CO2-free alternating
current that can be fed into the power
network.
• Fast and easy installation• Complete range of industrial-type data communication options, including remote monitoring• Life cycle service and support through ABB’s extensive global service network
ABB’s range of solar inverters, the ABB central inverters, are available from 100 kW up to 500 kW, and are optimized for cost-efficient multi-megawatt power plants. The ABB central inverter utilizes over 40 years of advances in inverter and power converter technology that has contributed to ABB becoming the world leader in AC drives. The ABB central inverter is designed for increased efficiency, reliability and ease of installation to maximize the return on investment.
ABB in Singapore
9
Product news
9
SVC Light® with Energy Storage
ABB introduces GridGuard overhead switch for Smart Grid distribution systems
ABB has launched SVC Light® (Static Var Compensator) with Energy Storage.
A new distribution class three-phase overhead, gang-operated medium voltage switch for emerging Smart Grid
systems has been introduced to the market.
The new technology combines SVC Light®, with a highly scalable battery storage technology. The Energy Storage can receive and store power from wind turbines and surplus power from the grid. It can take the power delivered on a sunny day from photo-voltaic panels and put it into its high capacity battery bank.Using modern electronics, SVC Light with Energy Storage feeds the grid with exactly the right amount of reactive and active power needed at each instant, independently of one another, and with a minimum of bulky filter arrangements.
The ABB GridGuard switch – the only unit on the market that meets or exceeds both IEEE and ANSI standards – provides investor-owned and public power utilities with easy integration, remote and local operation, and flexible switching capabilities.
With ABB’s GridGuard switch as a line management and restoration tool, utilities can more efficiently maintain their lines and manage and restore power as needed. Utilities using GridGuard should experience higher reliability with fewer interruptions, shorter downtimes and efficient line management. The GridGuard switch also includes maximum safety features for crews during line disconnection, increasing both line crew confidence and productivity.
Artist’s conception of a SVC Light with Energy
Storage installation, (130 kV, ± 30 Mvar
continuously and 30 MW for 15 minutes,
footprint 50 x 60m).
Standard quality features include a quarter inch steel phase base, stainless steel to brass
bearings, silver-plated copper reverse loop contacts, and silver-plated copper busbar blades.
ABB announced it will provide full engineering, customer service and sales support for this comprehensive switch product offering. The switch is available with a variety of interrupter options, mounting configurations and control mechanisms, including a motor-driven
feature. The GridGuard switch, supported by ABB’s medium voltage facility in Greensboro, North Carolina, also provides no external-arc interruption for line, transformer or cable switching.
High power Li-ion battery module, 220V
Features
10
First use of robot in Southeast Asia’s wood industry to increase productivity and lower carbon footprint
A wood processing company based in Singapore, Pacific Forest, has improved efficiency and productivity by
200 percent by using ABB’s robots to produce high quality wood products for the building of lifestyle homes and
hotel resorts.
Precise skills and experienced manpower are required to prepare wood needed for Pacific Forest’s clients, which include prestigious hotels in the French Polynesian islands of Bora Bora and Moorea.
Carpentry skills honed by people over several years were transferred to ABB’s multitasking IRB6640 Foundry Robot, by mounting tools on the robot to assist in accurate cutting, machining, drilling and finishing. The robot helped Pacific Forest reduce the amount of work contracted-out, by producing an output equivalent of 20 workers. The IRB6640 can achieve more precision compared to traditional methods, and has helped the company reduce unwanted wood wastage. Precise cutting is also important in managing productivity and costs for high density woods such as Balau and Merbau, which are more expensive and difficult to cut.
As the first company in Southeast Asia to use a robot in the wood industry,
About Pacific Forest
Pacific Forest Products is based in Singapore, and has expanded from its humble beginnings in 1988 into a multifaceted business with a sales turnover of S$15 million in 2009. The company’s core activities include the design and building of lifestyle homes, hotel resorts, and the manufacturing and trading of wood products.
Managing Director of Pacific Forest, Jason Chan said, “As part of our Gaia-friendly beliefs, we have looked into ways to reduce our impact on the environment. By reducing the amount of wood work processes being contracted-out, we could reduce the number of truck trips between factories, hence reducing our carbon footprint.”
Jason and his team had researched on the capabilities of the robot, and devised a solution of incorporating a CAD to CAM software to work with the robot. A Computer Aided Design (CAD) to Computer Aided Manufacturing (CAM) software helps to generate the points and path for robot movement, using drawings generated from CAD software. This CAD to CAM conversion significantly reduces programming time. Pacific Forest also developed a breakthrough design of a clamping system for the robot, introducing flexibility and ensuring smooth conversion.
The ABB team helped to train the robotics engineer, and worked very
closely with Pacific Forest to overcome technical difficulties, and gave assistance in programming, to ensure smooth operations.
Besides increasing productivity and lowering Pacific Forest’s carbon footprint, ABB’s robot also helped in saving process costs, and increased the safety standard of the workplace. Dust, wood splinters and noise are fenced in with the robot, allowing engineers to work in a more pleasant environment.
ABB will deliver a second IRB6640 robot in early May 2010, to help Pacific Forest to further increase its productivity. Pacific Forest aims towards full automation in a few years with a total of five robots. As part of the company’s sustainability plan, Pacific Forest is also looking into developing new wood substitute products to replace natural wood.
The IRB6640 Foundry Robot achieves higher
productivity, precision, and helps reduce material
wastage.
Wood products by Pacific Forest are key elements used for
buildings like The Four Seasons Resort in Bora Bora.
ABB in Singapore
11
ABB control technology plugs leaks, improves water quality in Sweden
ABB flowmeters reduce water loss in Riyadh
Utilities and energy company MälarEnergi can now track its entire water supply process, from the water works
via the pumping stations, on to the treatment plant, using ABB’s control and monitoring systems.
Utilities and energy company MälarEnergi can now track its entire water supply process, from the water works via the pumping stations, on to the treatment plant, using ABB’s control and monitoring systems.
MälarEnergi utility provides water solutions to the principal city of Västerås, and the region of Mälardalen. Västerås and its surroundings consume 42 million liters of water every day, year-round. All in all, MälarEnergi pumps water through a 600 km-long supply network.
For tap water production, a new ABB control and monitoring system guards
Riyadh is a sprawling city that stretches over some 536 square kilometers, an area more than five times the size of Paris. About 60 percent of Riyadh’s valuable water supply is lost through leakage in the 10,000 kilometers of
Features
11
water quality, energy consumption and water losses, ensuring potential profits aren’t poured down the drain. Before the upgrade, MälarEnergi’s water network lost more than 30 percent of its water.MälarEnergi uses a control and monitoring system based on ABB’s versatile and dependable AC800M controller, which helps control losses and even helps improve water quality, explains Göran Vikergård, responsible for the utility’s tap water production.
“Just consider leaks,” says Vikergård. “A 600-km long water-tight seal is almost impossible to achieve, so we always have to live with some leaks. But now that we
pipes that transport water to the city’s 4.5 million population.
The target set by the government-owned National Water Company is to reduce the volume of water and revenues that are lost to leakage to a more sustainable 20 percent.
One of the most important tools to achieve this target is the 900 ABB AquaMaster and WaterMaster flowmeters that measure the flow and pressure of water in the network’s primary pipeline.
ABB flowmeters in Riyadh required a compact, robust and maintenance-free solution that would measure pressure as
well as flow, and transmit the data via the GSM telecommunications network to the National Water Company’s central control room. For locations where connection to the power network was not possible, the flowmeters had to be battery-powered to avoid the high maintenance requirements of flowmeters energized by miniature solar panels.
About 60 percent of Riyadh’s water is lost
to leakage in the 10,000 km of pipes that
comprise the city’s distribution system.
MälarEnergi uses a control and monitoring system based on ABB’s versatile and dependable
AC800M controller, which helps control water losses and improve water quality in the 600-km water
network, explains Göran Vikergård, responsible for the utility’s tap water production.
ABB’s battery-powered
AquaMaster. ABB has the
world’s largest offering
of flowmeters, with an
unrivalled number of
well-proven measuring
principles, type variants
and applications.
have new water meters and pressure gauges throughout the whole network, we can locate leaks more quickly and act accordingly. Previously, about one third of the water we produced disappeared, which meant that we could not charge for it. Now our objective is 20 percent.”
“We can also minimize the use of chemicals when we know the exact amount that needs to be added to water to achieve the best quality,” he added. “This not only saves us money, but is obviously good for the environment too.”
Previously, the pumps in the treatment plant were either on or off. Today, they are in action all the time, but output is controlled to match the needs of the pumping process exactly. This not only saves electricity, but because they are subjected to less wear and tear, the pumps require less maintenance, which also saves on costs. MälarEnergi expects to save approximately US$28,000 per pump per year, an investment that should pay for itself in two to three years.
ABB FlowMaster flowmeters are helping the Saudi Arabian capital, Riyadh, to cut leakage in its water distribution network by around 40 percent. The flowmeters were repeatedly selected for their outstanding accuracy and performance.
12
ABB helps interconnect the Middle East with new super power grid
Phase 1 of the Gulf Interconnection, one the most important transnational infrastructure projects in the Middle
East, recently went online. Upon completion in 2011, this mega-sized pooling of electricity resources will
interconnect the power grids of the six Gulf states – Kuwait, Saudi Arabia, Bahrain, Qatar, the United Arab Emirates
and Oman. This interconnection will enable Gulf states to use their energy resources more efficiently.
12
ABB has played a key role throughout phase 1 of the project, which was completed in late 2009 at a cost of around $1.2 billion and is by far the largest of the interconnection’s three phases. Six state-of-the-art ABB transmission substations with gas-insulated switchgear – three in Saudi Arabia and one each in Kuwait, Bahrain and Qatar - enable the power to be delivered reliably and safely at 400 kilovolts (kV) to the power systems of all four countries.
ABB has led the innovation and development of GIS (gas insulated switchgear) substations, which is among the most suitable solutions for the harsh desert climate of this part of the Arabian peninsula.
Valued at around $250 million, the ABB solution includes 17 shunt reactors, which stabilize the voltage of the 400 kV cable between Saudi Arabia and the island of Bahrain. Two of the 15 reactors are rated at 300 MVAr and are the most powerful three-phase reactors ever made.
ABB is one of the few companies in the world that has the required experience and resources to deliver a project of this scale on time and to the full satisfaction of the client. ABB is the market and technology leader in gas insulated switchgear and shunt reactors, with more than 10,000 high-voltage bays and over 1,000 reactors installed worldwide
Among the challenges that confronted ABB were a lack of construction materials
in the region due to one of the biggest construction booms ever, and unstable ground conditions in Kuwait where the seawater was only 50 cm below the surface. Several roads also had to be widened and reinforced to permit the transport of transformers and reactors, each weighing several hundred tons.
Interconnections of this kind are possible thanks to a number of ABB innovations over the past 50 years. Technologies like HVDC and HVDC Light, FACTS, GIS substations and network management systems enable national and regional power grids to be interconnected and their energy resources to be pooled and traded and used more efficiently.
Features
The 400 kilovolt (kV) Al Zour gas insulated substation in Kuwait
1313
ABB control systems help capture 12 million tons of carbon dioxide
The importance of educating the next generation of crew
ABB process control systems have successfully managed the world’s first large-scale carbon capture and
storage (CCS) facility since 1996. To date nearly 12 million tons of carbon dioxide have been captured and safely
stored 1,000 meters below the seafloor. More than half of the world’s large-scale CCS facilities are now controlled
by ABB technology.
A competent work force is more productive, operates at reduced risk levels, achieves shorter down times, and
suffers fewer injuries.
Although there are several small-scale CCS projects in the world today, often using different proprietary technologies and operating on a pilot basis, there are only four facilities that capture and store carbon dioxide on a large commercial scale for climate change reasons.
Three of those four facilities are operated by Statoil, the Norwegian-based oil and gas company. ABB, the world’s leading supplier of distributed control systems for energy-intensive industries like oil and gas, is helping Statoil monitor and control the complex process of capturing and safely storing the carbon dioxide at these facilities.
Until the recent global economic crisis, offshore rig construction has been experiencing its largest growth in 20 years, requiring new and skilled employees in ever increasing numbers. The current slowdown is an ideal opportunity to enhance capabilities and develop human resources for the industry.
Systematic crew education is necessary for achieving safe and optimal performance on board today’s advanced vessels, while securing fuel savings during operation, and to ensure safe and reliable maintenance.
The Marine Academy offers training for safety, operation and maintenance of electrical systems. A permanent staff of trainers is responsible for training. In addition, external experts familiar with the various systems and vessel types are engaged to give specialized extension training, depending on the technical level set for the trainees and the objectives of the courses.
The academy offers DNV-certified marine high-voltage safety courses. Standard or tailor-made training on vessel operations with advanced electrical systems, such as electric propulsion and drilling drives are also offered. In addition, the training centre also develops tailor-made training programs together with the operator or owner of the vessels. Such training programs may include training of a specific system installation and configuration, or simulator-based remote control of electric propulsion.
Furnished with a wide range of equipment that is equivalent to installations on board vessels, the academy provides plenty of opportunities for hands-on experience that crew members usually cannot obtain on a working vessel. Experience in handling high-voltage equipment also heightens safety awareness.
When a vessel is out at sea, training can be critical: downtime is measured in
terms of millions of dollars per day, while additional fuel consumption through sub-optimal operation of a power plant can cause higher environmental emissions, and cost an owner dearly.
It was Statoil who developed the world’s first large-scale CCS process in 1996 at the Sleipner oil and gas field in the North Sea. By stripping the carbon dioxide from the natural gas, compressing it and injecting it into a storage reservoir 1,000 meters beneath the seafloor, Statoil was able to meet the market specifications, significantly reducing its greenhouse gas emissions and avoiding considerable cost.
About one million tons of carbon dioxide are captured and stored at Sleipner each year. This amounts to around 12 million tons in all since 1996 – a huge benefit for the environment and a pointer to how global carbon dioxide emissions can be reduced and managed in the coming years.
Features
ABB distributed control systems monitor and
control the entire production, safety and CCS
processes at three Statoil offshore and onshore
facilities in Norway
Contributed by: Eric Leong, Ding Kok Kin, Chua Hoon Hong, Nigel Chua
ABB in Singapore
14
Success stories
14
ABB among top 20 best companies for leadership for 2009ABB has been ranked 15 out of over 1100 organisations in the global ‘Best Companies for Leadership’ survey
jointly carried out by Hay Group and Business Week.
The survey revealed that the best companies for leadership produce better shareholder returns than the S&P 500, which is an index of 500 large cap common stocks actively traded in the United States. In general, these companies have formal leadership development programs, have opportunities for all employees to develop and practice capabilities needed to lead others, and have a sufficient number of internal candidates ready to fill open leadership positions. The top companies also focus more on positioning for the future compared to the economic downturn.
The best companies invest more into the people it needs, and people stay in the company primarily for growth opportunities. They value in leaders strategic thinking and execution
skills, inspiring leadership, teamwork, and influence, rather than technical competence and decision making.These companies also do better in areas like using corporate social responsibility to recruit employees, have a high proportion of women in senior leadership, make it easy for people to work from home, and thinks it is a key job requirement to have an appreciation of global issues.
“This ranking is a great honor for ABB, and an important confirmation of our commitment to talent. ABB’s performance in 2009 speaks volumes about the caliber of our leadership. Despite the worst global recession in decades and the need to scrutinize cost, we’ve continued making large strides in our talent management,” said Gary Steel, head of HR.
“We’ve sharpened our ability to identify performers earlier in their careers, and have development programs targeting every level of ABB leadership. A world class organization requires world class talent, and I’m pleased to see that our talent management processes – and their results – benchmark so well.” ABB ranks amongst brands like Wal-Mart, Nestle, Coca-cola, IBM, and ranks above top brands like Unilever, Hewlett-Packard and Goldman Sachs.
The Hay Group is a global management consulting firm that works with leaders to develop talent, and organize people to be more effective and perform at their best. The Business Week is a magazine published by Bloomberg.
ABB delivers first jack-up rigs to China
ABB has successfully delivered
the electrical systems for two jack-
up rigs for China Oilfield Services
Limited (COSL). This joint project
between ABB’s operations in
Singapore and China also marks
ABB’s delivery of the first jack-up
rigs in China.
ABB in Singapore delivered one ACS800LC liquid cooled VFD (Variable Frequency Drive), two drilling transformers and one braking resistor unit and ABB in China supplied one MNS low voltage switchboard and seven distribution transformers.
The COSL936 rig was built by the China Merchants Heavy Industry Company in Shenzhen and the COSL937 rig was built by the Dalian Shipbuilding Offshore Company in Dalian for China Oilfield Services Limited (COSL).
ABB in Singapore
15
ABB delivers electrical package solution to solar facility in SingaporeABB has completed the delivery
of a comprehensive electrical
package to Norway-based REC
wafer, the world’s largest producer
of multicrystalline silicon wafers.
REC is constructing the world’s
largest integrated solar energy
production facility in Singapore.
The scope of supply includes design, supply, installation, testing and commissioning of power distribution transformers, high-, medium-, and low-voltage switchgears, including the MNSiS integrated motor control system, a Power Quality Monitoring System (PQMS), variable speed drives, and two robots (The IRB 6640 and Flexpicker IRB 360). ABB’s
products and solutions help ensure power quality for uninterrupted operations.
The solar plant will be based on multicrystalline technology, and the integrated business model will secure
Success stories
15
ABB successfully delivers its first FPSO order to MODEC ABB has successfully delivered the E-house and electrical equipment package to MODEC Offshore Production
Systems (Singapore) for an FPSO due for Brazil. The project began in February 2009 and was completed in eight
months. This is the first FPSO application project for ABB in Singapore.
ABB carried out the design, engineering, fabrication, and construction of the complete E-house; comprising of structural and architectural design, HVAC system, fire detection system, carbon dioxide fire suppression system, complete E&I works like cable trays, support system, power and control cabling, and the design and supply of medium voltage and low voltage switchgear. The scope also included the integration of all equipment within the E-house.
An FPSO, or Floating Production, Storage and Offloading vessel, is a type of floating tank system designed to collect oil from a nearby platform, process it, and store it until it is offloaded onto waiting tankers. It is an efficient way of transporting oil in the offshore environment, in cases where long pipelines are not a feasible option.
More FPSOs are planned to be built to cater to Santos basin deep water oil and gas production at offshore Brazil. Singapore accounts for 70% of the global market for FPSO conversions, and 70% of the global market for jack-up rigs.
ABB wins second FPSO order from MODEC
ABB recently received an order for a second E-house for an additional MODEC FPSO. ABB will provide the same scope of supply, including transformers and the project is scheduled to be completed in March 2011.
volume off-take and margins, and act as an in-house base for product development across the value chain. Production is expected to commence in the first quarter 2010, and reach full capacity before 2012.
Course title MONTH (2010)
JUL AUG SEP OCT NOV DEC
Advant OCS
A331 AC450 configuration & operation 5 - 9 11 - 15
A351 Advant OS500 configuration & operation 2 - 6 18 - 22
800XA system
T305 System 800xA core system administration 6 - 10
T306 Process information management system 13 - 17
T308 System 800xA w AC800M hardware maintenance & troubleshooting 27 - 1 Oct 13 - 17
T309 System 800xA safety - AC800M high integrity config & maintenance
T310 System 800xA operations 10 - 11 8 - 9
T314 System 800xA basic configuration 20 - 24 6 - 10
T315C System 800xA engineering (control builder) 26 - 6 Aug 4 - 15
T315F System 800xA engineering (functional designer)
T320 System 800xA for advant/master configuration 12 - 16 18 - 22
T321 System 800xA for harmony configuration
T333 System 800xA with AC800M - Integration of IEC61850 20 - 24
T360 System 800xA for new channel partners
T530 Configuring AC800M using CBM professional 2 - 6 6 - 10
Freelance
T568 Freelance 800F system engineering 15 - 19
SG510 cpmPlus smart client - system administration 14
SG520 cpmPlus smart client - user training 13
SG550 800xA with information management with smart client 13 - 17
SG570 Smart client for pulp & paper QCS 1 - 2
SG580 cpmPlus enterprise connectivity solutions (ECS)
General machinery drives
G350 ACS350 startup & configuration 2 - 3
High performance machinery drives
G190 ACSM1 startup maintenance & service 12 - 13 4 - 5
Standard drives
G165 ACS550 startup & configuration 16 - 17 18 - 19 13 - 14
G166 ACH550 startup, maintenance & service hands-on 4 - 5
Start-Up and maintenance tools
G352 FlashDrop operations 5
Industrial drives, single drives
G152 ACS800 single drive, startup, maintenance & service hands-on 19 - 21 13 - 15 1 - 3
G156 ACS800-07 startup, maintenance & service 2 - 3 11 - 12 6 - 7
Industrial drives, multidrives
G160 ACS800 multidrives startup, maintenance & service
G161 ACS800 multidrives operation & configuration 26 - 27 6 - 7 15 - 16
SG160 ACS800 multidrives startup, operation, configuration, maintenance & service 11 - 13
G163 ACS800 liquid-cooled multidrive 13 - 15 13 - 15
Legacy drives
G330 ACS600 multidrives 21 - 23
Preventive maintenance
G106 AC drive service basics 11 - 12
G304 ACS600 preventive maintenance 19 - 20
G700 ACS1000 operation and maintenance 23 - 26 25 - 28
G750 ACS6000 operation and maintenance 5 - 8 27 - 30 8 - 11
DC DRIVES
G560 DCS800 basic course 12 - 15 20 - 23 22 - 25
ABB Training Centre, Singapore reserves the right to cancel or reschedule courses. Schedule is indicative and accurate at time of print. Other specific schedules are available upon request. For further enquiries on our training programs, please contact Calvin Lim (65) 6773 5843 or [email protected]
Control Systems
Collaborative production management (CPM)
Low voltage AC drives
Medium voltage AC drives
DC drives
Training
16
ABB in Singapore
17
Course title MONTH (2010)
JUL AUG SEP OCT NOV DEC
E124 System 800xA with AC800M - improving engineering efficiency 2 - 6
E136 System 800xA with - checking and troubleshooting PROFIBUS networks 13 - 17
E143 System 800xA with troubleshooting core system 4 - 8
E144 System 800xA performing a system health check 11 - 15
E171 System 800xA operator workplace advanced design and configuration 2 - 6 8 - 12
EE001 Optimizing energy usage in fans & pumps. 3 13
EE002 Energy saving in HVAC system. 21 6
EE003 Savings opportunity for medium voltage machines – MV AC drives 2
EE004 Energy savings methodology using VSD. 5 28 2
EE005 KNX/EIB lighting management system to optimize energy usage for lighting system 18 25
EE006 Energy saving methodology using ABB solutions 23
EE007 Green mark points with ABB solutions 19 26
EE008 Delivering energy savings 4 - 5
Marine
DRL1x Drilling drive system course 26 - 30 13 - 17 13 -17
ELE1x Electrical propulsion overview
ELE22 ACS6000SD/AD marine drive course 19 - 22 27 - 30 6 - 9
ELE32 Marine HV switchboard course 6 - 9 6 - 9 23 - 26
ELE33 Marine LV switchboard course 4 - 7
HV10 Marine high voltage safety course 12 - 16 16 - 20 20 - 24 29 - 3 Dec
Pulp & Paper
C202 Maintain industrial quality control system w AdvantMaster controllers 1 - 5
C232 Smart platform with QCS LAN 11 - 15
C302 Maintain industrial quality control system w AC800M controllers 5 - 9 4 - 8
SG732 Network platform 1200 with QCS LAN 12 - 16 8 - 12
SG750 Pulp and paper operator training
SG795 Basic control tuning & loop performance manager (LPM) 13 - 17
Oil & Gas / Petrochemicals
SG900 PlantGuard TMR safety system - configuration and operation 2 - 6
SG900 Safety integrity level (SIL) determination training 20 - 24
SG920 ABB ‘August’ training 22 - 26
Power System / Symphony / INFI 90 / Power Generation Portal (PGP)
SG101 Process control unit/ harmony control unit 6 - 10
SG621 Power generation portal for harmony configuration & operation 13 - 17
SG855 Water leakage management system 16 - 20
SG860 Gas turbine gas path diagnostic 20 - 24
SG890 Optimax - performance monitoring & simulation training 4 - 6
SG950 PGC 2000 and Vistanet 2.0 8 - 12
SG955 CGA product training 4 - 7
SG960 PGC5000 training
SG970 FTIR training
SGMD2 High performance industrial drives for a low harmonics networks 21
SGLVP6 Motor starter appreciation course 15 30
SGLVP7 Safety coordination studies course 24 26
SGLVP8 Softstarter appreciation course 22 7
SGLVP9 Earth leakage protection using ELCB, RCBO and ELR 23
SGLVP12 Smissline plug-in MCB and distribution system 8 7
SGLVP13 Electrical network design software, DOC Win 7 4 23 14 10 1
SGLVS14 Safe and reliable low voltage switchgear design 9 10
SGINC15 PLC appreciation course 5 28 2
Expert workshops
Energy efficiency & energy management course
Industries applications
Analytical systems
Automation products appreciation course
Training
17
www.ancomee.comancomee.com.sg
ITE Electric System Pte Ltd
Amcon Electrical & Environment (Singapore) Pte Ltd
Partners network
18
Drinking water from the sea for millions of people?
Certainly.
Algeria is 95 percent arid land with little rainfall, so its people rely on desalination technology for water they can drink. Here we are helping to build one of the world’s largest desalination plants to meet the daily water needs of about 5 million people. ABB’s integrated electrical and automation solution will power the plant with maximum energy efficiency. With the world population continuously growing, the need for clean water has never been greater. www.abb.com/betterworld