ABB Drives

ABB drives and motors catalogue

2005

PRODUCTS

Drives&Motors cat v32 22/2/05 5:10 pm

2

ABB drives and motors

Subhead00 - 0000

ABB drives alliance

Channel partners

ABB Drives Alliance is the UK’s most comprehensivedrives network, bringing levels of service never seenbefore in the UK drives industry. The 10 ABB Drives Alliance partners arestrategically located around the UK andhave one of the largest stock of AC drives available off-the-shelf. Driveswithin ABB’s UK stock from 0.12 kWto 315 kW are instantly available.

Each ABB Drives Alliance partner isable to access up-to-the-minute centralstock information using ABB’s on-lineinternet service. The members of theteam have been handpicked byABB because they areoutstanding drives experts in their local area.

To locate your nearest Drives Alliance Partner call 07000 DRIVES (07000 374837)

Profile

Welcome to the 2005 edition of ABB’sdrives and motors catalogue. Containedwithin, are the basic technical detailsand prices for our most commonly usedproducts. However, our range ofproducts, systems and services is farmore extensive.

Please do not hesitate to call us for any furtherinformation. Our details are on the back cover.

Thank youSteve RuddellGeneral Manager, Drives & Motors

Industries and Applications

Drive services

Product services for our customers

Services for all ABB drive series are based on the ABBdrive lifecycle management model. With completelifecycle support, you will always be aware of the supportplans of your valuable assets.

ABB has the largest drive service team of all drivesuppliers with field service engineers located all over theworld. Services offered include:■ Selection & dimensioning■ Training■ Installation & commissioning■ Support & remote services■ Maintenance & field services■ Spare parts & repair■ Migration & retrofits■ Replacement & recycling■ Refurbishment of classic equipment


ABB Motor Service Partners is a network of 15 independent companies that have pooled theirresources to offer national and local customer access to:

■ electric motors up to 200 kW■ extensive technical knowledge & back-up■ the best equipped repair and maintenance facilities

in Europe■ common service standards throughout the UK

■ common pricing■ access to ABB’s motor design and technical support■ standardised reporting functions

To locate your nearest ABB Motor Service Partnercall 07000 MOTORS (07000 668677)

ContentsDRIVESABB drives Quickfinder pages 4 - 5

ABB component drive pages 6 - 80.12 kW to 2.2 kW Supply voltage 110 - 240 V, 200 - 240 VSingle phase and 3-phase

ABB general machinery drive pages 9 - 110.12 kW to 2.2 kW Supply voltage 200 - 480 V, Single phase and 3-phase

ABB decentralised drive pages 12 - 130.55 kW to 2.2 kW Supply voltage 380 - 480 V3-phase

ABB standard drive pages 14 - 170.75 kW to 355 kWSupply voltage 200 - 240 V, 380-480 V3-phase

ABB industrial drive pages 18 - 23Single drives 0.55 kW to 2,800 kWSupply voltage 230 V, 380 - 415 V, 440 - 500 V, 525 - 690 V3-phase

DC drives and MV AC drives page 24

Software tools pages 25 - 26

MOTORSAC motors overview page 27

General purpose pages 28 - 29aluminium/steel motorsTEFC low voltage motors, aluminium or steel frameIP 55, IC 411, single-speed

General purpose page 29cast iron motorsTEFC low voltage motors, cast iron frameIP 55, IC 411, single-speed

Process performance page 30cast iron motorsTEFC low voltage motors, cast iron frameIP 55, IC 411, single-speed

Flameproof motors, 80-400, page 31EEx d/e* IIB T4TEFC low voltage motors, IP 55 IC 411, single-speed

Non-sparking motors, 80-400, page 32EExnA T3 cast iron frameTEFC low voltage motors, IP 55, IC 411, single-speed

Optional extras for all page 33motor types

ABB LV motors - total market offer page 34

Faxback page 35

3

iconsys is ABB’s partner for the sales and engineering ofall DC drive solutions in the UK. As a system integrator thecompany offers a complete range of DC drive solutions tothe metals, printing and material handling sectors.For more information call 01952 607300

partnerABB motor service


4

ABB drives Quickfinder

Subhead00 - 0000The table below lists some important features of ABB drives. Its main purpose is to highlight the differences between the different product categories. For each category of products it is indicated whether a feature is available.

Features

Voltage & power

Supply options(assume 6-pulse as standard)

Enclosure class

Mechanical construction

Motor control

Software functionality/features

Programmability

Start-up assistantHelp keyReal-time clockI/O

Fieldbuses

Cooling method

EMC compliance(EN 61800-3)

Harmonic filter / choke

Dynamic braking HW options

Switching frequencySafety options(dedicated hardware)PC tools

Approvals †

Industry specific products

ACS50, 110 V, 1-phase input,output 240 V, 3-phase as standard

12 pulse diodeRegenerative 6-/12-pulseLow harmonic regenerativeIP 00IP 20IP 21IP 22IP 42IP 54/ IP 54R/ IP 55IP 65Module - panel mountableWall-mounted (IP 21 minimum)Free-standingCabinet-built by ABBDTC (open/closed loop)Sensorless vectorScalar, VVVFBasicMediumAdvancedParameter programming via keypadBlock programmingControl solutions for specific applications

Analogue input/outputDigital input/outputSpeed feedbackMotor thermal protection relayModbusPROFIBUSModbus PlusDeviceNetLonWorks ®

EthernetControlNetCANopenInterBus-STCP/IP connectionDirect air coolingWater coolingNo EMC filter2nd unrestricted1st restricted1st unrestrictedChokeSwinging choke (better harmonic performance)Resistor and/or chopperdu/dt filtersSine filtersCoated boardsCommon mode filterCabinet options

Prevention of unexpected start-upEmergency stop (CAT.0, CAT.1)DriveWindow LightDriveWindowDriveOPCDriveSizeDriveAPCEHVACMarine driveCrane, Winder, Extruder, Traverse, Test-Benches,Motion Control, Pump Control, Master-Follower

ABB component drives(ACS50, ACS100 - p.6)

1-ph 100 - 120 V: 0.18 - 0.37 kW1-ph 200 - 240 V: 0.18 - 2.2 kW1-ph 200 - 240 V: 0.12 - 2.2 kW3-ph 200 - 240 V: 0.37 - 2.2 kW

––––●

❍ ❋

––––● (DIN mount)❍ ❋

––––●

●

––

● ❋

–––––

1 / 03 / 1

––––––––––––●

–●

● / ❍ ❋

● / ❍ ❋

● ❋❋

❍

–❍ ❋

❍

––

n/a–

up to 16 kHz–––––––●

––––

ABB general machinery drives(ACS140 - p.9)

1-ph 200 - 240 V: 0.18 - 2.2 kW3-ph 200 - 240 V: 0.37 - 2.2 kW3-ph 380 - 480 V: 0.37 - 2.2 kW

––––●

❍

––––● (DIN mount)❍

––––●

–●

–●

–––––

2 / 15 / 2

––

● /❍❍

–❍

––––––●

–●

❍

❍

–❍

–❍

❍

––

n/a–

up to 16 kHz––❍

––––●

––––

● = standard ❍ = option – = not available ❋ = ACS100 only ❋❋ = ACS50 only † = other global approvals such as UL, cUL, CSA,C-Tick, GOST-R also applicable


5

ABB drives QuickfinderSubhead00 - 0000

Subhead00 - 0000

Pages 23 and 24 highlight other AC and DC drives offered by ABB which are not listed within this Quickfinder.

ABB decentralised drives(ACS160 - p.12)

3-ph 380 - 480 V: 0.55 - 2.2 kW

–––––––––●

❍

❍ , or integrated onto the motor––––●

–●

–●

–––––

2 / 15 / 2

––●

❍

–❍

❍

––❍

❍

–●

–●

●

●

●

●

–❍

❍

––

n/a–


––––●

––––

ABB standard drives(ACS550 - p.14)

3-ph 208 - 240 V: 0.75 - 75 kW3-ph 380 - 480 V: 0.75 - 355 kW

–––––●

––❍

–●

●

●

––●

●

–●

–●

––●

●

●

2 / 26 / 3+(3)

––●

❍

–❍

❍

–❍

❍

❍

–●

––●

●

❍

–●

❍

❍

––● (> 100 kW)–


––❍

–●

● (ACH550)–––

ABB industrial drivesdrive modules

(ACS800-01, -02, -04, -11 - p.18)

3-ph 230 V: 0.55 - 200 kW3-ph 400 V: 1.1 - 1450 kW3-ph 500 V: 1.5 - 1850 kW3-ph 690 V: 5.5 - 1900 kW

❍

❍

❍

● (800-04)–● (800-01, -02, -11)––––●

●

● (800-02)–●

–●

––●

●

●

❍

●

●

–3+(2) / 2+(2)7+(6) / 3+(6)

❍

–❍

❍

❍

❍

❍

❍

❍

❍

❍

❍

●

–❍

●

❍

–●

–❍

● / ❍

❍

❍

● / ❍

–DTC❍

–❍

❍

❍

❍

❍

●

–❍

❍

❍

ABB industrial drivesCabinet drives

(ACS800-07, 17, - p.20)

3-ph 400 V: 45 - 1450 kW3-ph 500 V: 55 - 1850 kW3-ph 690 V: 45 - 2800 kW

❍

–❍

––●

❍

❍

❍

––––●

●

–●

––●

●

●

❍

●

●

–3+(2) / 2+(2)7+(6) / 3+(6)

❍

❍

❍

❍

❍

❍

❍

❍

❍

❍

❍

❍

●

❍

❍

●

❍

–●

–❍

● / ❍

❍

❍

● / ❍

❍

DTC❍

❍

❍

❍

❍

❍

❍

●

–❍

❍

❍


6

What is an ABB component drive?

The ABB component drives meet the requirements ofOEMs, installation companies and panel builders. It is acomponent that is bought, together with othercomponents from a logistical distributor. The drive isstocked and the number of options and variants isoptimised for logistical distribution.

Where can it be used?

Business/retail■ Washing machines ■ Dryers■ Mixers ■ Dishwashers ■ Boring machines ■ Tread mills ■ Pizza ovens ■ Car washing machines ■ Vacuum cleaners ■ Rotating billboards■ Sliding doors ■ Gate drivesIndustry■ Pumps ■ Fans■ Conveyors ■ Gate control■ Material handling ■ Mixers■ Industrial kitchen equipmentBuilding automation■ HVAC ■ Exhaust fans■ Boilers/chillers ■ Pumps■ Condenser fans ■ Door openers

What does it replace?

■ Contactors ■ Soft starters■ N-speed motors ■ Triac■ The need for single phase cap start motors

Highlights - ACS50

■ Quick and easy installation - less than 5 minutes■ No programming - easy and descriptive interface■ Compact size and narrow shape■ Ideal drive for DIN-rail

mounting■ Low EMC emissions■ Silent motor■ Forward and reverse switch■ 2 mounting orientations■ IP 20 as standard■ No control panel required■ User interface via 3 DIP

switches and a further 8on/off function switcheslocated on panel front

■ Potentiometer option■ Integral EMC filter for 1st

environment (EN61800-3),unrestricted distribution

■ Optional first environment filterfor extended cable runs

■ Optimised switching frequency for noise (up to 16 kHz)

ABB component drive

0.12 kW to 2.2 kW Supply voltage 110 - 240 V, 200 - 240 V, single phase and 3-phase

The ABB component drivehas the option of apotentiometer

Highlights - ACS100

■ Wide range of ramp times, 0.1 to 1800 seconds■ DC hold stop ensures stationary motor shaft■ IR compensation improves starting torque for

heavy loads■ Parameter lock prevents

tampering by unauthorised staff■ Optional DIN rail or flange

mounting■ IP 20 enclosure■ Parameter copy between drives

with detachable control panel■ Cost optimisation without the

panel■ 2-year warranty


7

ABB component drive

ACS50 - Ratings, types, voltages and prices

200/240 V, 1-phase supply, 3-phase output 200/240 V

Nominal Ratings Frame Dimensions kg Type Order PriceNominal Input Nom. Output Max H1 H2 W D code

Current Current Output mm mm mm mmkW A A A

With EMC filter0.18 4.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01E-01A4-2 64759221 £810.37 6.9 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01E-02A2-2 64759230 £890.75 10.8 4.3 6.5 B 170 146.5 67.5 128 0.70 ACS50-01E-04A3-2 64759248 £1061.5 18.2 7.6 11.4 D 226 203 70 159 1.1 ACS50-01E-07A6-2 68322090 £1492.2 22 9.8 14.7 D 226 203 70 159 1.1 ACS50-01E-09A8-2 68322111 £174

Without EMC filter0.18 4.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01N-01A4-2 64748599 £760.37 6.9 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01N-02A2-2 64759191 £840.75 10.8 4.3 6.5 B 170 146.5 67.5 128 0.70 ACS50-01N-04A3-2 64759213 £991.5 18.2 7.6 11.4 C 194 171 70 159 1.1 ACS50-01N-07A6-2 68322103 £1382.2 22 9.8 14.7 C 194 171 70 159 1.1 ACS50-01N-09A8-2 68322120 £163

100/120 V, 1-phase supply, 3-phase output 200/240 VNominal Ratings Frame Dimensions kg Type Order Price

Nominal Input Nom. Output Max H1 H2 W D codeCurrent Current Output mm mm mm mm

kW A A A

With EMC filter0.18 6.4 1.4 2.1 A 170 146.5 45 128 0.65 ACS50-01E-01A4-1 68234204 £880.37 9.5 2.2 3.3 A 170 146.5 45 128 0.70 ACS50-01E-02A2-1 68234212 £98

Without EMC filter0.18 6.4 1.4 2.1 A 170 146.5 45 128 0.55 ACS50-01N-01A4-1 64759264 £850.37 9.5 2.2 3.3 A 170 146.5 45 128 0.60 ACS50-01N-02A2-1 64759272 £92

ACS50 - main featuresFeature Notes Benefit

No programming All inverter parameter settings are done with DIP Faster set-upswitches and potentiometers Easier configuration

Easier drive for new users

Compact size and Up to 0.37 kW, 45 mm width; 2.2 kW, 67.5 mm width Less space required for installationnarrow shape

Removable mounting clip Removable clip allows DIN-rail and wall mounting Flexible and easy mountingfrom back and side of the unit

EMC First environment. EMC filters as standard Low EMC emissions

Automatic switching Increases switching frequency automatically, when Provides lowest possible noise without derating frequency drive temperature is decreased of the drive

110-240 V AC, single phase Output always capable of full 240 V, 3-phase, regardless of Can easily replace single phase cap start motorssupplies supply voltage

Supply terminals L, N (R, S)

Configuration switches

Control potentiometers

Relay output terminals

Analogue input signal selector (U/I)

Control terminal

Motor terminals T1, T2, T3 (U, V, W)

H1 = Height with mounting clipH2 = Height without mounting clipW = WidthD = Depth

H1

WD

H2


8

ABB component drive


200 V/240 V 1-phase supply with heatsink, 3-phase outputNominal Ratings Frame Dimensions kg Type Order Price*

Nominal Input Nom. Output Max H1 W D codeCurrent Current Output mm mm mm

kW A A A

0.12 2.7 1.0 1.5 A 146 80 149 0.9 ACS101-K18-1 4088 £730.18 4.4 1.4 2.1 A 146 80 149 0.9 ACS101-K25-1 4118 £790.25 5.4 1.7 2.6 A 146 80 149 0.9 ACS101-K37-1 4126 £840.37 6.9 2.2 3.3 A 146 80 149 0.9 ACS101-K75-1 5955 £920.55 9.0 3.0 4.5 A 146 80 149 0.9 ACS101-1K1-1 5963 £1000.75 10.8 4.3 6.5 B 146 80 186 1.2 ACS101-1K6-1 6030 £1211.1 14.8 5.9 8.9 C 218 80 169 1.6 ACS101-2K1-1 6048 £1531.5 18.2 7.0 10.5 C 218 80 169 1.6 ACS101-2K7-1 6056 £1782.2 22.0 9.0 13.5 D 245 80 176 1.9 ACS101-4K1-1 6064 £207

200 V/240 1-phase supply heatsinkless, 3-phase outputNominal Ratings Frame Dimensions kg Type Order Price*


kW A A A

0.12 2.7 1.0 1.5 H 146 80 119 0.8 ACS101-H18-1 7893 £730.18 4.4 1.4 2.1 H 146 80 119 0.8 ACS101-H25-1 7907 £790.25 5.4 1.7 2.6 H 146 80 119 0.8 ACS101-H37-1 7915 £840.37 6.9 2.2 3.3 H 146 80 119 0.8 ACS101-H75-1 7923 £920.55 9.0 3.0 4.5 H 146 80 119 0.8 ACS101-1H1-1 7931 £1000.75 10.8 4.3 6.5 H 146 80 119 0.8 ACS101-1H6-1 7940 £121

200 V/240 V 3-phase supply with heatsink, 3-phase outputNominal Ratings Frame Dimensions kg Type Order Price*


kW A A A

0.37 3.2 2.2 3.3 A 146 80 149 0.8 ACS103-K75-1 5971 £920.55 4.2 3.0 4.5 A 146 80 149 0.8 ACS103-1K1-1 5980 £1000.75 5.3 4.3 6.5 B 146 80 186 1.1 ACS103-1K6-1 6072 £1211.1 7.2 5.9 8.9 C 218 80 169 1.5 ACS103-2K1-1 6081 £1531.5 8.9 7.0 10.5 C 218 80 169 1.5 ACS103-2K7-1 6099 £1782.2 12.0 9.0 13.5 D 245 80 176 1.8 ACS103-4K1-1 6102 £207

Feature Note Benefit

Simple parameter set Easy to navigate, program or set-up

Flange mounting If the drive is to be installed on a surface Reduces sizethat provides sufficient cooling, it can be See general machinery drive, ACS140 for pictures supplied without the heat sink of the frame sizes

S-ramp Enables drive to go down to creep speed Gives a more accurate stopbefore stopping

Coast to stop Enables drive to come to stop under its Reduces strain on the machineryown inertia

3-wire control Can be connected to overriding Design flexibilitycontrol system

Fault history Most recent fault logged Simplifies troubleshooting

ACS100 - main features

* price excludes keypad


9

ABB general machinery drive

0.12 kW to 2.2 kW Supply voltage 200 - 480 V, single phase and 3-phase

What is an ABB general machinery drive?

These drives are designed for a wide range ofmachinery applications. Aimed at OEMs who builddrives into machinery, they offer ease of installation andintegration. For many applications the repeatability ofthe drive will have an impact on the quality of themachinery and must therefore be high.

Because the drive is likely to be purchased in largequantities, the distribution costs are low. Smaller OEMscan buy an ABB general machinery drive from anauthorised channel partner, whereas larger OEMs canaccess the drives directly from ABB.


■ Material handling ■ PackagingIndustry■ Pumps■ Fans■ MixersBuilding Automation■ HVAC■ Condenser fans■ Exhaust fans■ Pumps■ Boilers/chillers

ABB general machinery drive promises

■ Very fast and accurate control■ High repeatability ■ Fast and extensive I/O■ PID control■ Simple installation and integration■ Cost optimisation without the panel

Highlights:

■ IP 20 enclosure available

■ Available with a multitude of mounting options - flange, heatsinkless, DIN etc. see page 11

■ Multifunction keypadfor easy interfacing

■ Fieldbus and PC connection options

■ Detachable key pad■ Remote panel mounting■ Fieldbus connection■ Simple to start up and use

What are its main features?

Feature Notes Benefit

Application macros Pre-written parameter set-ups Fast commissioning and programming

Heatsink Heatsink is located outside the enclosure Majority of power loss is external thereby enhancing the component life and increasing the reliability of the drive

Drive can be delivered without a heatsink Useful when space is limited. User has to provide an installation surface with sufficient cooling

I/O Fast and extensive Caters for a wide range of applications

Mounting 3 variations available:■ Wall Traditional and easy to fix ■ DIN rail Multiple drives mounted in panel■ Flange

PID control Internal closed loop controller No need to purchase separate items


10



200/240 V 1-phase supply with heatsink, IP 20

Nominal Ratings Frame Dimensions kg Type Order Price*Nominal Input Output Max Output H W D code

Current Current Current mm mm mmkW A A A

0.12 2.7 1.0 1.5 A 146 80 149 0.9 ACS141-K18-1 4011 £79.000.18 4.4 1.4 2.1 A 146 80 149 0.9 ACS141-K25-1 4037 £87.000.25 5.4 1.7 2.6 A 146 80 149 0.9 ACS141-K37-1 4045 £101.000.37 6.9 2.2 3.3 A 146 80 149 0.9 ACS141-K75-1 5998 £115.000.55 9.0 3.0 4.5 A 146 80 149 0.9 ACS141-1K1-1 6005 £123.000.75 10.8 4.3 6.5 B 146 80 186 1.2 ACS141-1K6-1 6111 £148.001.1 14.8 5.9 8.9 C 218 80 169 1.6 ACS141-2K1-1 6129 £187.001.5 18.2 7.0 10.5 C 218 80 169 1.6 ACS141-2K7-1 6137 £220.002.2 22.0 9.0 13.5 D 245 80 176 1.9 ACS141-4K1-1 6145 £242.00

200/240 V 1-phase supply heatsinkless, IP 20



0.12 2.7 1.0 1.5 H 146 80 119 0.8 ACS141-H18-1 7958 £79.000.18 4.4 1.4 2.1 H 146 80 119 0.8 ACS141-H25-1 7966 £87.000.25 5.4 1.7 2.6 H 146 80 119 0.8 ACS141-H37-1 7974 £101.000.37 6.9 2.2 3.3 H 146 80 119 0.8 ACS141-H75-1 7982 £115.000.55 9.0 3.0 4.5 H 146 80 119 0.8 ACS141-1H1-1 7991 £123.000.75 10.8 4.3 6.5 H 146 80 119 0.8 ACS141-1H6-1 8008 £148.00

380/480 V 3-phase supply with heatsink, IP 20



0.37 2.0 1.2 1.8 A 146 80 149 0.8 ACS143-K75-3 4061 £174.000.55 2.8 1.7 2.6 A 146 80 149 0.8 ACS143-1K1-3 4070 £186.000.75 3.6 2.0 3.0 B 146 80 186 1.1 ACS143-1K6-3 6196 £209.001.1 4.8 2.8 4.2 C 218 80 169 1.5 ACS143-2K1-3 6200 £232.001.5 5.8 3.6 5.4 C 218 80 169 1.5 ACS143-2K7-3 6218 £256.002.2 7.9 4.9 7.4 D 245 80 176 1.8 ACS143-4K1-3 6226 £287.00

380/480 V 3-phase supply heatsinkless, IP 20



0.37 2.0 1.2 1.8 H 146 80 119 0.8 ACS143-H75-3 8016 £174.000.55 2.8 1.7 2.6 H 146 80 119 0.8 ACS143-1H1-3 8024 £186.000.75 3.6 2.0 3.0 H 146 80 119 0.8 ACS143-1H6-3 8032 £209.001.1 4.8 2.8 4.2 H 146 80 119 0.8 ACS143-2H1-3 8041 £232.00

NOTE:200/240 V 3-phase supply with heatsink, IP 20 also available on request*prices exclude keypad


11


Subhead

In addition to the conventional wall mounting and time-saving DIN rail mounting, the general machinerydrive also offers flange-mounting. The heatsink islocated outside the enclosure and hence the major share of the power loss is external to the enclosure.

Dimensions

Heatsinkless seriesIn cases where space is a limitation, drives without aheatsink can be delivered as standard. The user has toprovide an installation surface with sufficient cooling.For more information, please refer to the ACS140 User’s Manual (call 07000 DRIVES).

frame size H

heatsinkless wall mounting mounting on DIN rail flange mounting

frame size A frame size B frame size C frame size D

80mm

146m

m

146m

m

146m

m

218m

m

245m

m

119mm149mm

186mm169mm

176mm

80mm 80mm 80mm 80mm

Options

RS 485/232 AdapterType code: ACS140 RS 485/232 - £24.00Controlling the ACS140 drive via Modbus orDriveWindow Light 2 software requires replacement ofthe panel with the RS 485/232 adapter. When the adapteris used, several ACS140 units can be controlled usingModbus protocol.

Control PanelType code: ACS100 - PAN - £23.00ACS140 drives can be bought with or without adetachable control panel.

Panel Extension Cable Kit Type code: PEC-98-0008 - £17.00This option includes a gasket, a 3 m connection cable forcontrol panels, fixing material for the cables and a drillingjig. With this kit IP 65 protection class is achieved.

ABC fieldbus modulesType codes: ABC-PDP and ABC-DEVUp to ten drives can be controlled with one ABC fieldbusmodule. ABC modules are available for PROFIBUS (typecode ABC-PDP) and DeviceNet (type code ABC-DEV)fieldbus protocols.

Input and output chokesOutput chokes are used when motor cables abovenormal length are required. Optional input chokes can be used with the ACS140 whenever there is a notchysupply network.

Brake choppersRange of external brake choppers is available.

Mounting options


12

ABB decentralised drive

0.55 kW to 2.2 kW Supply voltage 380 - 480 V, 3-phase

What is an ABB decentralised drive?

An ABB decentralised drive is an integrated motor anddrive package that places the drive near the motor, inareas that are easily accessible. Alternatively, it allowsthe drive to be physically attached to the motor.

The drive and motor are delivered as an integrated,ready-to-use package that are perfectly matched.

Because the drives are close to the process, they mustmeet the requirements of relatively harsh environmentsand the IP class must be high, typically IP 65.

For more demanding applications, an optional IP 65control panel can be used to select from a range ofmore advanced application macros.


This type of drive is forecast to have an impact onsectors such as the automotive industry and conveyormachinery especially where it is convenient to mountthe drive near to the motor. Typical industries include:■ Dairies ■ Food processing ■ Automotive ■ Conveyor machinery

ABB decentralised drive promises

■ Reduced cabling costs■ Lower maintenance■ Space saving - no control cabinet required■ Easy installation and commissioning ■ Good fieldbus communications for

decentralised control



Application macros Pre-written parameter set-ups Fast commissioning and programming

Brake chopper Built-in resistor is mounted externally Less additional cabling

EMC Built-in Meets all needs for first environment EMC requirements

Enclosure Robust and vibration tested, tight, aluminium IP 65 Ideal for demanding applications where water may enclosure with varnished electronic boards be present

Fieldbus options Can be part of every major industrial and domestic Saves time and money by linking up with existing control system control systems, while improving system efficiency

Motors Compatible with ABB motors and other manufacturers Easy to covert a fixed speed motor to variable speed operation

Mounting Can be installed in any position on wall or on motor Brings flexibility to allow applications that would otherwise be limited to fixed speed useWhen motor mounted, no cabinet space is required

PID control Suitable for HVAC systems and applications needing No additional external controllers neededclosed loop

Positioning application Allows simple positioning tasks. Requires encoder Conveyors can be positioned without additional equipmentmacro


13

ABB decentralised drive


Dimensions of motor mounting unit

Dimensions of wall mounting unit

Nominal ratings Frame Type Order PriceNominal Input Cont. Max. code

kW current output currentA current 150%

A APN I1N I2N

1) IMAX2)

*Motor mounted, IP 65, 380-500 V, 3-phase (2nd environment, excluding motor mounting kit and keypad)0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-A 64678035 £348.000.75 2.2 2.4 3.6 R1 ACS163-1K6-3-A 64678043 £367.001.1 3.2 3.4 5.1 R1 ACS163-2K1-3-A 64678051 £389.001.5 4.1 4.1 6.2 R1 ACS163-2K7-3-A 64678060 £415.002.2 6.0 5.4 8.1 R2 ACS163-4K1-3-A 64678078 £494.00

*Motor mounted, IP 65, 380-500 V, 3-phase (1st environment, excluding motor mounting kit and keypad)0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-B 64315374 £449.000.75 2.2 2.4 3.6 R1 ACS163-1K6-3-B 64315382 £473.001.1 3.2 3.4 5.1 R1 ACS163-2K1-3-B 64315404 £499.001.5 4.1 4.1 6.2 R1 ACS163-2K7-3-B 64315412 £531.002.2 6.0 5.4 8.1 R2 ACS163-4K1-3-B 64315421 £611.00

Wall mounted, IP 65, 380-500 V, 3-phase (2nd environment, excluding filter, including keypad)0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-D 64351427 £413.000.75 2.2 2.4 3.6 R1 ACS163-1K6-3-D 64351443 £434.001.1 3.2 3.4 5.1 R1 ACS163-2K1-3-D 64351451 £461.001.5 4.1 4.1 6.2 R1 ACS163-2K7-3-D 64351460 £489.002.2 6.0 5.4 8.1 R2 ACS163-4K1-3-D 64351478 £571.00

Wall mounted, IP 65, 380-480 V, 3-phase (1st environment, with filter, including keypad)0.55 1.6 1.8 2.7 R1 ACS163-1K1-3-E 64351486 £516.000.75 2.2 2.4 3.6 R1 ACS163-1K6-3-E 64351494 £541.001.1 3.2 3.4 5.1 R1 ACS163-2K1-3-E 64351508 £571.001.5 4.1 4.1 6.2 R1 ACS163-2K7-3-E 64351516 £606.002.2 6.0 5.4 8.1 R2 ACS163-4K1-3-E 64351524 £689.00

Frame A B C D E Weightsize mm mm mm mm mm kg

2nd environment R1 99 112 157 221 171 3.9R2 99 112 157 261 171 4.6

1st environment R1 135 149 157 221 171 5.5R2 135 149 157 261 171 6.3

Frame A B C Weightsize mm mm mm kg

2nd environment R1 317 134 171 5.1R2 357 134 171 5.8

1st environment R1 317 171 171 6.7R2 357 171 171 7.5

1) Power stages are designed for continuous I2 / I2NSQ current. These values apply at altitudes of less than 1000m ASL. Current limits for squared torque are not valid if theACS 160 drive is used on top of a non ABB motor.

2) 150% of nominal current I2N allowed for one minute every 10 minutes.

* Drives complete with motor pre-assembled, can also be quoted on application.

A

AB

C

B

C D

E

Options

Control Panel: CA-PAN-L £41.00

Fieldbus: PROFIBUS, InterBus-S, CANopen and DeviceNet are available

Mounting: to non ABB motors available


14

ABB standard drive

0.75 kW to 355 kWSupply voltage 380-480 V00 - 0000

What is an ABB standard drive?

The ABB standard drive is simple to buy, install,configure and use, saving considerable time. It is widelyavailable through ABB’s distributors. The drive hascommon user and process interface, common softwaretools for sizing, commissioning, maintenance andcommon spare parts. A wide range of fieldbus optionsgives excellent connectivity.


The ABB standard drive can be used in a wide range ofindustries. Typical applications include pump, fan andconstant torque use, such as conveyors. The ABBstandard drive is ideal in those situations where there isa need for simplicity to install, commission and use andwhere customising or special product engineering is not required.

ABB standard drive promises

■ Precise delivery■ Quick installation■ Rapid start-up■ Trouble-free use

Highlights:

■ Assistant control panel providing intuitive use of the drive

■ Patent pending swinging choke for superior harmonic reduction

■ Sensorless vector and scalar control■ Integral EMC filter for 1st and 2nd environment

as standard■ Flexible fieldbus system with built-in Modbus and

numerous internally mountable fieldbus adapters■ CE, UL and cUL approved


Feature Note Benefit

Application macros Ready-made macros for common applications Fast set-up

Assistant control panel Two soft-keys, function of which changes according to the state of the panel Easy commissioningBuilt-in “Help” button, giving programming hints Fast set-upReal-time clock, allows timed tracing of faults and setting of parameters to Easier configurationactivate at various times of day Rapid fault diagnosisChanged parameters menu Quick access to all parameter changes

Diagnostic assistant Activated when fault occurs Quick fault diagnostics

Maintenance assistant Monitors running hours, motor rotation, MWh consumed and cooling fan Takes care of preventative maintenance of run time drive, the motor or driven application

Start-up assistant Guides user through all essential settings without going to parameter list Easy set-up of parameters

Clone drives Copy parameters from drives of differing rating or software versions Easy to copy parameters to other drives

Changed parameters Drive keeps a sub list of only the parameters that have been changed These are the only parameters that from default need remembering

Brake chopper Built-in up to 11 kW Reduced cost

Chokes Swinging DC chokes - matches the right inductance to the right load, Reduces Total Harmonic Distortion (THD)thereby suppressing and reducing harmonics emissions up to 25%

Connectivity Simple to install: Reduced installation timeEasy connection of cables Secure cable connectionsEasy connection to site fieldbus systems through multiple Enhanced connectability to suit needsI/Os, plug-in options and built in protocols

EMC 1st and 2nd environment RFI filters as standard No need for additional external filtering

Fieldbus Built-in Modbus using RS 485 Reduced costOptional plug-in fieldbus modules

Intuitive features Noise optimisation: Considerable motor noise reductionIncreases switching frequency of drive when drive temperature is reduced Reduces inverter noise and improvesControlled cooling fan: Drive is cooled only when necessary energy efficiency

Mounting template Supplied separately with unit Quick and easy to mark mounting screwholes on installation surface

Sensorless vector control Improved motor control performance Enables wider range of applications

Cable pedestal Separate cabling arrangement for larger drives Deliver pedestal, connect cables then wheeldrive over the top

Low peak volts and du/dt Motor peak voltage and rate of rise meets IEC60034-17 Kind to motor windings

Swinging choke Low THD even at reduced motor loads 25% less supply distortion. Meetsrequirements of G5/4


ABB standard drive

0.75 kW to 355 kWSupply voltage 380-480 V (230 V)00 - 0000

Wall mounted - 0.75 to 110 kW, 380 - 480 V (230 V also available)

■ Wall mounted, frame sizes R1-R6■ IP 21 as standard■ IP 54 as option■ Built-in EMC filter■ Standard software■ Built-in Modbus interface■ Cable connection box■ Brake chopper in frame sizes R1-R2■ Assistant control panel■ Built-in patented swinging choke (R1-R4) ■ Sensorless vector control, scalar control

Free standing - 110 to 355 kW, 380 - 480 V

■ Free standing, frame sizes R7-R8■ IP 21 as standard■ Built-in EMC filter■ Standard software■ Built-in Modbus interface■ Pedestal unit on wheels■ Assistant control panel■ Sensorless vector control, scalar control

Assistant control panelFor easy drive programming, a detachable, multi-lingualalphanumeric assistant control panel is delivered asstandard. The control panel has various assistants and abuilt-in help function to guide the user. It includes a realtime clock, which can be used during fault logging and

Local/Remote indicationMotor rotation indicator

Speed reference

Actual value 2, Output current (selectable)Actual value 3, Process value(selectable)

Soft key 2 functionReal time clockSoft key 1 function

in controlling the drive, such as start/stop. The controlpanel can be used for copying parameters for back upor for downloading to another drive. A large graphicaldisplay and soft keys make it extremely easy to navigate.

Name Function

Start Initiates operation of drive

Stop Ceases operation of drive

Up Changes parameters and their value/increases reference

Down Changes parameters and their value/decreases reference

Loc/Rem Changes drive state from local control (control panel) to remote control (I/O or other external source)

HELP Built-in “Help” button

Soft key 1 Function changes according to state of panel

Soft key 2 Function changes according to state of panel

For further information, seetechnical catalogue, “ABB standard driveACS550, 0.75 kW - 355 kW”code 3AFE 64792857EN

For further information, see technicalcatalogue, “ABB standard drive ACS550, 0.75 kW - 355 kW” code 3AFE 64792857EN

15


16

ABB standard drive

ACS550 - Ratings, types, voltages and prices00 - 0000

Normal use

Voltages: 208 - 240 V also available. Prices and ratings on application

Normal use versus heavy-duty useFor the majority of pump, fan and conveyor applications, select “Normal use” figures. For high overload requirements, select “Heavy-duty use”figures. If in doubt contact your local ABB sales office or your drives distributor - see back cover.

PN for kW = Typical motor power in 400 V at normal use (110% overload)Phd for kW = Typical motor power in 400 V at heavy-duty use (150% overload)

Heavy-duty use

Wall mounted drives

PN I2N Phd I2hd

kW A kW A

1.1 3.3 0.75 2.4 R1 ACS550-01-03A3-4 3AUA0000003385 £380.00 £430.001.5 4.1 1.1 3.3 R1 ACS550-01-04A1-4 3AUA0000003386 £450.00 £500.002.2 5.4 1.5 4.1 R1 ACS550-01-05A4-4 3AUA0000003387 £470.00 £520.003 6.9 2.2 5.4 R1 ACS550-01-06A9-4 3AUA0000002415 £510.00 £560.004 8.8 3 6.9 R1 ACS550-01-08A8-4 3AUA0000002419 £580.00 £630.00

5.5 11.9 4 8.8 R1 ACS550-01-012A-4 3AUA0000002420 £680.00 £730.007.5 15.4 5.5 11.9 R2 ACS550-01-015A-4 3AUA0000002412 £780.00 £840.0011 23 7.5 15.4 R2 ACS550-01-023A-4 3AUA0000002417 £940.00 £1,000.0015 31 11 23 R3 ACS550-01-031A-4 3AUA0000002418 £1,190.00 £1,290.00

18.5 38 15 31 R3 ACS550-01-038A-4 3AUA0000002431 £1,530.00 £1,640.0022 44 18.5 38 R4 ACS550-01-044A-4 3AUA0000002545 £1,780.00 £1,870.0030 59 22 44 R4 ACS550-01-059A-4 3AUA0000002546 £2,160.00 £2,320.0037 72 30 59 R4 ACS550-01-072A-4 3AUA0000002547 £2,500.00 £2,650.0045 96 37 77 R5 ACS550-01-096A-4 64726846 £3,070.00 £3,280.0055 124 45 96 R6 ACS550-01-124A-4 64726811 £3,850.00 £4,260.0075 157 55 124 R6 ACS550-01-157A-4 64726820 £4,690.00 £5,100.0090 180 75 156 R6 ACS550-01-180A-4 64726838 £5,690.00 £6,110.00110 195 90 162 R6 ACS550-01-195A-4 68294479 £6,450.00 £6,900.00

3-phase supply voltage 380-480 VRatings Frame Type Order IP 21 IP 54

code Price (+B055)Price

Normal use Heavy-duty use

Free standing units

PN I2N Phd I2hd

kW A kW A

132 245 110 192 R7 ACS550-02-245A-4 64727010 £7,340.00160 289 132 224 R7 ACS550-02-289A-4 64727028 £8,630.00200 368 160 302 R8 ACS550-02-368A-4 64727044 £10,420.00250 486 200 414 R8 ACS550-02-486A-4 64727061 £11,930.00280 526 250 477 R8 ACS550-02-526A-4 64727079 £13,180.00315 602 280 515 R8 ACS550-02-602A-4 64727087 £14,440.00355 645 315 590 R8 ACS550-02-645A-4 64727095 £16,280.00

3-phase supply voltage 380-480 VRatings Frame Type Order IP 21

code Price


17

ABB standard drive

ACS550 - Dimensions and options00 - 0000

Dimensions

Wall mounted units Free standing units

Options

Available optionsProtection classIP 54Coated boards (available later)

Control panelIf no control panel is required it can be removedBasic control panel, with no clock or assistants

I/O options1

Extended relay output, 3 extra relay outputsFieldbus2

DeviceNetLonWorksPROFIBUS-DPCANopenControlNet

1 One slot available for relay extension board2 One slot available for fieldbus adapter. Modbus built-in as standard.

H1 = Height with cable connection boxH2 = Height without cable connection boxW = Width D = Depth

H1

W

W

H2

D

D

H1

Wall mounted unitsDimensions and weights

IP 21 / UL type 1 IP54 / UL type 12

H1 H2 W D kg H W D kgmm mm mm mm mm mm mm

R1 369 330 125 212 6.5 441 213 238 8.2R2 469 430 125 222 9 541 215 245 11.2R3 583 490 203 231 16 604 257 276 18.5R4 689 596 203 262 24 723 257 306 26.5R5 739 602 265 286 34 776 369 309 38.5R6 880 700 300 400 69 924 410 423 80

Framesize

IP 54 - price on application

Free standing unitsDimensions and weights

IP 21 / UL type 1 IP54 / UL type 12

H1 H2 W D kg H W Dmm mm mm mm mm mm mm

R7 1507 n/a 2501) 5201) 115 n/a n/a n/aR8 2024 n/a 3471) 6171) 230 n/a n/a n/a

Framesize

1) The dimensions apply to bookshelf mounting. In flat type mounting the widthand depth change places.

Panel mounting kitThe panel mounting kit enables mounting of controlpanels on cabinet doors. This kit includes a 3 mextension cable, a gasket, mounting screws and amounting template.

DriveWindow Light 2DriveWindow Light 2 is PC software used for rapidcommissioning and controlling of drives. It has featuresfor programming, monitoring, trouble shooting andmaintenance. It is also a set-up and control tool which isWin98, WinNT, Win2000 and WinXP compatible.

Output chokesOutput chokes are used when motor cables abovenormal length are required. Cable can be roughly 1.5times standard cable length. The maximum switchingfrequency with output chokes is 4 kHz.

Brake units and choppersFrame sizes R1 to R2 are delivered with integrated brakechoppers as standard. Other units can use the compact-sized brake units which include brake chopper andresistor. For more information please refer to the ACS-BRK Brake Units Installation and Start-up Guide.


18

ABB industrial drive

What is an ABB industrial drive?

ABB industrial drives are highly flexible AC drives, thatcan be customised to meet the precise needs ofindustrial applications. They cover a wide range ofpowers and voltages, including industrial voltages up to690 V. ABB industrial drives have a wide range ofoptions, many of which are built-in. Programmability is akey feature of these drives. Order-based customisation isan integral part of the offering.


The ABB industrial drive is suitable for pump, fan andconstant torque applications as well as high performanceapplications. Such applications include winders,extruders, mono-rails, engine test rigs, compressors,cranes, renewable energy and centrifuges. The majorityof ABB industrial drives are sold to system integrators,OEMs and end-users. The drive has ATEX certificationwith ABB’s EExd, EExde and EExna motors and hasmarine certification for Lloyds and DNV.


ABB industrial drive promises

■ Drives customised at ordering stage■ Easy installation■ Flexibility to program more advanced applications

Highlights

■ Blanket ATEX certification (Ex) with ABB’s motors■ Innovative and specific hardware variants to meet

exact needs of the application and customer groups■ Specialised software variants for selected applications■ Adaptive programming – like having PLC inside

the drive■ Direct Torque Control – well proven control platform■ Common features across power range■ Common user and process interface with fieldbus■ Common software tools for sizing,

commissioning, maintenance■ Common spare parts■ All major types of drive topology covered -

6-pulse, 12-pulse, 4Q, aircooled, water cooled, etc


Built to order product Customer can specify a wide range of options and Always meets application needs build variants

Adaptive programming Small PLC inside your drive as standard Needs no additional hardware or software15 programmable function blocks. Up to 200 blocks by Program drive on-site during commissioningloading multiblock software Create own I/O signals, modify speed or torque

reference chain, set a timer or generate a message

Application macros Preconfigured parameter settings Fast setting for many applications

Brake choppers Built-in to all units (when ordered) Reduced costs, high performance, internal monitoringNo additional space or installation time needed

Cable terminals Big enough even for aluminium & SWA cables Direct connection of armoured cables

Chokes Built-in harmonic filtering and drive protection Reduces THD emissions

Compact size Contains EMC filter and chokes inside the drive No extra space or cabling is needed

Cooling fan Silent long-lifetime cooling fan, that switches on and off Reduced maintenance, time and cost

Direct Torque Control Full torque at zero speed without encoder Consistently excellent performance ensures thatAccurate speed and torque control drive is not the limiting factor in process

EMC 2nd environment RFI filters as standard No need for additional external filtering, or additional 1st environment optional space, or additional cabling between drives and filter

Fieldbus gateway Snap-on module that is easily mounted inside drive Wide range of gateways means choice of automation system becomes independent of drive manufacturer

I/O Extensive and flexible I/O provides No need for additional space or cablingadditional analog or digital connections

IP rating Available in IP 21, IP 42, IP 54 or IP 55 No need for separate cabinet for wall mounted units

Option modules Space available for three option modules for I/O All connections built-in. Uses same modules as extensions, fieldbuses, pulse encoder or PC connection standard drive

Start-up assistant Guides user through all essential settings without going Easy set-up of parametersto parameter list Your own language

On-line info system always available

Huge range of Special variants for wall, cabinet mount, 4Q, pre-built There is always an ABB industrial drive variant that fits hardware variants cabinets, drive kits, water-cooled the specification

Low peak volts Motor peak voltage and rate of rise meets IEC60034-17 Kind to motor windingsand du/dt


19


Single drives 0.55 kW to 2,800 kW

Wall mounted drives - see page 21

Series ACS800-01■ Power range 0.55 - 110 kW, (230 - 690 V)■ IP 21 as standard, IP 55 as option■ Wide range of built-in options■ Optional cable box for SWA cables■ Coated boards and internal I/O options■ Built-in brake chopper■ EMC filter for 1st environment, restricted distribution

according to EN 61800-3 - optional■ EMC filter for 2nd environment, unrestricted

distribution according to EN 61800-3 - standard■ Internal fieldbus options

Series ACS800-11, regenerative drives (price onapplication)■ Power range 7.5 to 110 kW, (230 - 500 V)■ IP 21 as standard■ Active supply unit can regenerate energy back to the

mains. Together with built-in LCL line filtering, itprovides a low harmonic drive solution in one package

Free standing drives - see page 22

Series ACS800-02■ Power range 45 - 560 kW, (230 - 690 V)■ IP 21 standard■ Extremely compact, can be mounted in 2 orientations■ Bookshelf or flat mounting options■ EMC and brake chopper built-in■ Three I/O and fieldbus extension slots inside■ Innovative pedestal enclosure for ease of cabling -

pedestal can be supplied in advance■ Drive module on wheels■ Can be provided with an enclosure extension with

additional options and local isolation■ Long lifetime cooling fan and capacitors ■ Large power terminals allowing the use of a wide

range of cable sizes

For further information, seetechnical catalogue, “ABBindustrial drives, ACS800,stand-alone single drives,0.55 kW - 2,800 kW” code: 3AFE 68375126 EN

For further information aboutthe ACS 800-01 marinedrive, see technicalcatalogue, “ABB drives formarine ACS 800-01, 0.75 kW - 110 kW” code: 3AFE 68326753 EN

For further information, seetechnical catalogue, “ABBindustrial drive ACS 800-11,7.5 kW - 110 kW” code: 3AFE 68440807 EN

For further information, see technical catalogue, “ABB industrial drives, ACS 800, stand-alone single drives, 0.55 kW - 2,800 kW” code: 3AFE 68375126 EN


20


Single drives 0.55 kW to 2,800 kW

For further information, see technical catalogue, “ABB industrial drives, ACS 800,stand-alone single drives, 0.55 kW - 2,800 kW” code: 3AFE 68375126 EN

Cabinet built drives - see page 22

Series ACS800-07■ Power range 45 - 2,800 kW, (380 - 690 V)■ IP 21 as standard, IP 22, IP 42, IP 54 and IP 54R

as options■ Up to 500 kW, based on a single module including

rectifier and inverter■ Above 500 kW separate rectifier and inverter modules

that have plug-in power connectors for easymaintenance and redundancy. Modules wheel in andout of cabinet

■ 6- or 12-pulse operation as standard■ Extremely compact, internal swinging gate for

control options■ Factory built cabinet which comes EMC and thermally

type tested for trouble free operation■ Extensive range of standard options

Series ACS800-04 and ACS800-04M■ 0.55 - 1,900 kW (230 V - 690 V)■ IP 00 kits or IP 20 modules depending on frame size ■ Separate controllers linked by optical

cables for galvanic isolation■ Optimised design for cabinet assembly■ Easy access to power terminals, plug connections on

wheeled units■ Compact design■ Side by side mounting (excl. versions with side exit)■ Harmonic filtering choke inside■ Long lifetime cooling fan and capacitors■ Extensive, programmable I/O with galvanically isolated

inputs■ Three I/O and fieldbus extension slots inside■ Block programming possibility■ ACS800-04M can be ordered as disassembled

parts to optimise the items purchased■ Rittal assembly kits available for easy

cabinet integration■ Innovative, patented mounting for higher

packing density

Chassis mounted - single drives - see page 21


21


ACS800-01, ACS800-04 - Ratings, types, voltages and prices

TABLE NOTES

Nominal Ratings:Icont.max : rated current availablecontinuously without overloadability at 40°C.Imax : maximum output current. Availablefor 10 s at start, otherwise as long asallowed by drive temperature. Note:max. motor shaft power is150% P hd .

Typical Ratings:No-overload usePcont.max : typical motor power in no-overload use.Light-overload useIN : continuous current allowing 110% IN for1min/ 5 min at 40°C.PN : typical motor power in light-overload use.Heavy-duty useIhd : continuous current allowing 150%Ihd for 1min/ 5 min at 40°C.Phd : typical motor power in heavy-dutyuse.

The current ratings are the sameregardless of the supply voltage withinone voltage range.

The ratings apply at 40°C ambienttemperature. At higher temperatures (up to 50°C) the derating is 1%/1°C.

Notes:1) 50% overload available if Tamb < 25°C.

If Tamb = 40°C, max overload for 1 min is 37%.

2) 50% overload available if Tamb < 30°C.If Tamb = 40°C, max overload for 1 min is 40%.


H1 = Height with cable connection boxH2 = Height without cable connection boxW1 = Width of the standard unit1) ACS 800-01 without cable connection box does not fulfill IP 21 requirements

Other voltages are available, 230 V, 500 V, 690 V, Price on applicationIncludes 2nd environment EMC filter

Wall mounted drives

Wall mounted (module), dimensionsIP 21 IP 55

Frame H1 H2 W1 Depth Weight H1 W1 Depth Weightsize mm mm mm mm kg mm mm mm kg

R2 405 370 1) 165 226 9 528 263 242 16R3 471 420 1) 173 265 12 528 263 273 18R4 606 490 1) 240 274 26 774 377 278 32R5 739 602 1) 265 286 37 775 377 308 50R6 880 700 1) 300 400 67 923 420 427 77

No-overload Light Heavy-duty Type Frame IP 21 IP 55use overload use Price (+B056)

Pcont. max Icont.max Imax PN IN Phd Ihd Price

kW A A kW A kW AThree phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V)1.5 5.1 6.5 1.5 4.7 1.1 3.4 ACS800-01-0003-3 R2 £820 £9512.2 6.5 8.2 2.2 5.9 1.5 4.3 ACS800-01-0004-3 R2 £860 £9913 8.5 10.8 3 7.7 2.2 5.7 ACS800-01-0005-3 R2 £930 £1,0614 10.9 13.8 4 10.2 3 7.5 ACS800-01-0006-3 R2 £1,050 £1,181

5.5 13.9 17.6 5.5 12.7 4 9.3 ACS800-01-0009-3 R2 £1,160 £1,2917.5 19 24 7.5 18 5.5 14 ACS800-01-0011-3 R3 £1,290 £1,46511 25 32 11 24 7.5 19 ACS800-01-0016-3 R3 £1,490 £1,66515 34 46 15 31 11 23 ACS800-01-0020-3 R3 £1,730 £1,90522 44 62 18.5 41 15 32 ACS800-01-0025-3 R4 £2,070 £2,30330 55 72 22 50 18.5 37 ACS800-01-0030-3 R4 £2,370 £2,60337 72 86 30 69 22 49 ACS800-01-0040-3 R5 £2,580 £2,83045 86 112 37 80 30 60 ACS800-01-0050-3 R5 £3,130 £3,38055 103 138 45 94 37 69 ACS800-01-0060-3 R5 £3,690 £3,94075 141 164 55 132 45 97 ACS800-01-0070-3 R6 £4,290 £4,69890 166 202 75 155 55 115 ACS800-01-0100-3 R6 £5,010 £5,418110 202 282 90 184 75 141 ACS800-01-0120-3 R6 £5,940 £6,348

Chassis mountingNo-overload Light Heavy-duty Type Frame IP 00

use overload use Price

Pcont. max Icont.max Imax PN IN Phd Ihd

kW A A kW A kW A

Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V)110 206 326 110 202 90 163 ACS800-04/04M-0140-3 R7 £6,000132 248 404 132 243 110 202 ACS800-04/04M-0170-3 R7 £7,250160 289 432 160 284 132 240 1) ACS800-04/04M-0210-3 R7 £8,480200 445 588 200 440 160 340 ACS800-04/04M-0260-3 R8 £9,970250 521 588 250 516 200 370 ACS800-04/04M-0320-3 R8 £11,410315 602 840 315 590 250 477 ACS800-04/04M-0400-3 R8 £12,820355 693 1017 355 679 315 590 2) ACS800-04/04M-0440-3 R8 £14,420400 720 1017 400 704 355 635 3) ACS800-04/04M-0490-3 R8 £16,280

Chassis mounting, dimensionsBookshelf mounting

Type Height Width Depth Weightmm mm mm kg

R7 1121 426 467 100R8 1558 571 564 205

Flat type mountingType Height Width Depth Weight

mm mm mm kg

R7 1152 631 259 100R8 1589 779 356 205

1) 2) 3) See Table Notes, rightOther voltages available on applicationDrive can be purchased pre-assembled or as a disassembled kit, where parts can be omitted for cost optimisation by panel builders

For Wall mounting use H1 dimension.For Panel mounting use H2

H1 H2

Removable cableconnection box


22


ACS800-02, ACS800-07 - Ratings, types, voltages and prices

1) 2) 3) See Table Notes, rightFree-standing with enclosure extension. Priced with fuse switch isolatorOther options: top exit/entry, meter thermistor, emergency stop contactorOther voltage ranges available, 230 V, 500 V, 690 V. Price on application Prices with enclosure extension on application

*) Weights are for the basic configurationwith switch fuse, but without contactorand other options.H1 = Height with cable connection boxH2 = Height without cable connection box

W1 = Width of the standard unitW2 = Width with enclosure extensionN/A = not available1) The dimensions apply to bookshelf

mounting. In flat type mounting the width and depth change places.

2) With enclosure extension the depth isincreased by 25 mm due to the switch fuse handle.

ACS800-07 can be supplied with an extensive range of standard cabinet options, contact your ABB representative for details

Free standing (with pedestal)No-overload Light Heavy-duty Type Frame Price

use overload use

Pcont. max Icont.max Imax PN IN Phd Ihd

kW A A kW A kW A

Three phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V)110 206 326 110 202 90 163 ACS800-02-0140-3 R7 £6,250132 248 404 132 243 110 202 ACS800-02-0170-3 R7 £7,560160 289 432 160 284 132 240 1) ACS800-02-0210-3 R7 £8,850200 445 588 200 440 160 340 ACS800-02-0260-3 R8 £10,420250 521 588 250 516 200 370 ACS800-02-0320-3 R8 £11,930315 602 840 315 590 250 477 ACS800-02-0400-3 R8 £13,420355 693 1017 355 679 315 590 2) ACS800-02-0440-3 R8 £15,110400 720 1017 400 704 355 635 3) ACS800-02-0490-3 R8 £17,060

Free standing (with pedestal), dimensionsIP 21

Frame H1 H2 W1 W2 Depth Weight Weight withsize mm mm mm mm mm kg enclosure

extension*) kg

R7 1507 N/A 250 1) 602 520 1) 2) 110 234R8 2024 N/A 347 1) 793 617 1) 2) 240 450

Free standing (cubicle)No-overload Light Heavy-duty Type Frame Price

use overload usePcont. max Icont.max Imax PN IN Phd Ihd

kW A A kW A kW AThree phase supply voltage 380, 400 or 415 V. The power ratings are valid at nominal voltage (400 V)

75 141 164 55 132 45 97 ACS800-07-0070-3 R6 £4,89090 166 202 75 155 55 115 ACS800-07-0100-3 R6 £5,670110 202 282 90 184 75 141 ACS800-07-0120-3 R6 £6,690110 206 326 110 202 90 163 ACS800-07-0140-3 R7 £7,860132 248 404 132 243 110 202 ACS800-07-0170-3 R7 £9,390160 289 432 160 284 132 2401) ACS800-07-0210-3 R7 £10,820200 445 588 200 440 160 340 ACS800-07-0260-3 R8 £12,850250 521 588 250 516 200 370 ACS800-07-0320-3 R8 £13,650315 602 840 315 590 250 477 ACS800-07-0400-3 R8 £16,640355 693 1017 355 679 315 5902) ACS800-07-0440-3 R8 £18,660400 720 1017 400 704 355 6353) ACS800-07-0490-3 R8 £20,810

Free standing (cubicle), dimensionsFrame Width Height*) IP Height*) Depth Depth top Weight (kg) with

size with fuse 21/22/42 IP 54 entry/exit*) line fuse switchswitch*)

R6 430 4) 2130 2315 646 646 300R7 830 2130 2315 646 646 400R8 830 2130 2315 646 646 500

See Table Notes, rightOther voltage ranges available, 230 V, 500 V, 690 V. Price on applicationOther power ratings, price on application

TABLE NOTES

Nominal Ratings:Icont.max : rated current availablecontinuously without overloadability at 40°C.Imax : maximum output current. Availablefor 10 s at start, otherwise as long asallowed by drive temperature. Note:max. motor shaft power is150% P hd .

Typical Ratings:No-overload usePcont.max : typical motor power in no-overload use.Light-overload useIN : continuous current allowing 110% IN for1min/ 5 min at 40°C.PN : typical motor power in light-overload use.Heavy-duty useIhd : continuous current allowing 150%Ihd for 1min/ 5 min at 40°C.Phd : typical motor power in heavy-dutyuse.

The current ratings are the sameregardless of the supply voltage withinone voltage range.

The ratings apply at 40°C ambienttemperature. At higher temperatures (up to 50°C) the derating is 1%/1°C.

Notes:1) 50% overload available if Tamb < 25°C.

If Tamb = 40°C, max overload for 1 min is 37%.



4) 630mm for types ACS800-07-0120-3and 0143-5 if equipped with du/dt filter.


23


Regenerative cabinet built drives

Series ACS800-17■ Power range 75 - 1,120 kW, (380 - 690 V)■ IP 21 as standard, IP 22, IP 42, IP 54 and IP 54R optional■ Active supply unit can regenerate back to the mains,

together with in-built LCL line filtering provides 2-4% harmonic distortion back to the mains

■ Wheel out power modules for improved manual handling■ Pluggable power connections

In addition to the commonly used drives described in this brochure, ABB’s product range extends to drives formore demanding uses. Prices on application.

Water cooled single drives for high power applications (Price on application. See below)

Series ACS600■ Power range 700 - 4,300 kW, (690 V)■ IP 42 as standard, IP 54 as option■ Provides reliable operation under extremely

adverse conditions■ Silent and safe operation without the need for air

ventilation or air conditioning

For further information, see“ACS 600 catalogue” code: 3AFE 64162021 EN

(Price on application. See below)

(Price on application. See below)

Regenerative drive modules

Series ACS800-14■ 110 - 900 kW (380 - 480 V)■ IP 00 kits■ Assembly kits for Rittal cabinets and generic cabinets■ Separate controllers for galvanic isolation■ Requires a separate +24 V DC supply at 3A■ Active supply unit can regenerate back to the mains,

together with in-built LCL line filtering provides 2-4% harmonic distortion back to the mains

ABB industrial drives, multidrives

Series ACS800 multidrive■ 1.5 to 5600 kW, 380 - 690V■ Multidrives are built from industrial drive modules connected to a

common DC bus. ■ IP 21 as standard, IP 22, IP 42 and IP 54 as option■ Smaller power modules have high packing density,

using a patented mounting arrangement■ Power modules on wheels for easy manual handling■ Plug-in power connectors for easy maintenance and redundancy■ Wide range of built-in options, including brake choppers, EMC filters,

fuse switches, contactors, communication options etc


DC Drives

ABB standard DC drives■ Range from 20 to 820 A DC■ Series DCS400 is a digital DC drive targeted at OEMs, like machine builders.■ An integrated IGBT-based field supply results in less motor stress, and

better speed accuracy ■ From 20 to 1,000 A at voltages up to 500 V AC (max. DC voltage 600V)

ABB industrial DC drives■ Range from 25 to 5,150 A DC■ From 20 to 5,200 A at voltages up to 1,000 V■ Series DCS500 is ideal for users who need a powerful drive for

demanding applications ■ Series DCS600 DC drive shares the same hardware platform as the DCS500 ■ Available in a single bridge up to 5,150 A

24

DC drives and MV drives

Medium voltage AC drives

Series ACS1000■ From 315 kW to 80 MW■ Medium voltage drive built with reliable IGCT tecnology■ Retrofit-ready for existing motors and suitable for most MV applications■ Output sine filter for pure sinusoidal voltage and current output:

standard motors, no motor derating, no voltage stress and no common mode voltages on the motor insulation

Series ACS6000■ Provides the most suitable product for demanding high-powered

applications ■ Active Rectifier Unit for four-quadrant operation and reduced

harmonics and adjustable power factor ■ Line Supply Unit for 2-quadrant operation and a constant power factor

of 0.96 over the whole speed range ■ Modular design for optimum configurations ■ IGCT power semiconductor for highest reliability and low component count ■ DTC control platform for exceptionally high torque and speed performance

Power quality filter (PQF)

■ Actively eliminates harmonics in a controlled way■ Filters up to 50th harmonic in accordance with G5/4 requirements■ Each harmonic individually programmable■ Active filters – only work when harmonics are present thereby reducing

unwanted losses, resulting in greater overall efficiency■ Close loop for better measurement of harmonics - thereby more accurately

eliminating the potentially damaging harmonic■ Auto-detection of CT polarity - ensures accurate current distortion readings

on network, resulting in easy commissioning■ Stores record trail. Fault and event log – any trip will have a record trail■ Available in IP 00 back plane or IP 21, IP 42 cabinets■ New intuitive user interface


ABB offers several software tools to ease andenhance the use of ABB drives. Especially whenstraightforward routines cannot be applied, thesetools provide a user-friendly and easy-to-useapproach for the selection, commissioning and useof AC drives.

Integration and programming tools

DriveOPC - for WindowsTM

based monitoring of ABBindustrial drives

This software package allowsOLE for Process Control(OPC) communication

between Windows applications and ABB drives. It is anideal tool for integrating commercial PC monitoringsoftware and ABB drives.

DriveOPC enables remote connection over local areanetworks and can access all drives connected to the fastoptical link of drives. The number of measuring points isnot limited.

DriveOPC gives the user read access to:■ Drive status: local, running, direction, fault, warning,

homing reference■ Signals and parameters■ Fault logger parameters■ Fault logger contents■ Event logger contents■ General drive information■ Data logger settings, status and contents

DriveOPC gives user write access to:■ Drive Control: local, start, stop, forward, reverse, coast

stop, reset fault, home, teach-in, contactor on/off,reference

■ Parameters■ Fault logger clear■ Data logger init, start, trig, clear

DriveAP - for adaptiveprogramming of ABBindustrial drives.

This PC tool is used tocreate, document, edit and

download Adaptive Programs. Adaptive Programming canbe done with the standard control panel or with DriveAP.

DriveAP offers a clear and easy way to develop, test anddocument Adaptive Programs with a PC. It modifiesfunction blocks and their connections and requires nospecial programming.

Adaptive Programming results are easy to document ashard copies or store as PC files with DriveAP.

Upload or downloadAdaptive Programs can be uploaded from connected drivesand displayed graphically on a PC screen, for service ordocumentation purposes. Ready made Adaptive Programscan be downloaded to any of the connected drives.

Start-up and maintenance tools

DriveWindow - for ABB industrialdrives.

This Windowsapplication is usedfor commissioningand maintainingABB industrial drives equipped with fibre opticcommunication. It is an OPC based commissioning andmaintenance tool and uses DDCS communication. It canalso be used remotely via the intranet. Among itsfunctions are control operations (start, stop, references),monitoring (signals), parameters (changing values),datalogger (controls, display), fault logger (display faults,controls), back-up and restore (complete software back-up).

DriveWindowLight - for ABBstandard drives.

DriveWindow Lightis a start-up andmaintenance toolfor the ABB standard drives range. The key functions include:■ Showing actual status of the connected drive■ Edit and show the drive parameters■ Save and load drive parameters

Software tools

Subhead00 - 0000

25Continued overleaf


26

Software tools

Subhead00 - 0000

■ Back up and restore drive parameters■ Offline configuration of drive parameters■ Graphical monitoring of drive signals■ Numerical monitoring of drive signals■ Run step response tests

Engineering tools

DriveSize - for dimensioningdrives and motors.

This PC program helps selectan optimal motor, frequencyconverter and transformer,especially useful where astraightforward selection

from a catalogue is not possible. DriveSize is used tocompute network harmonics and to create documentsabout dimensioning. It contains current versions of ABB’smotor and frequency converter catalogues.

DriveSize software can be used in Win98, WinNT,Win2000 and WinXP operating systems.

DriveChopper - fordimensioning a brakingchopper and resistor.

DriveChopper is a web toolfor braking chopper andresistor dimensioning (visit www.abb.co.uk/energy).The program is createdespecially for system designerswho need a braking unit for a particular drive application.

Selection of a braking unit is based on user input,simulation and product database. The main input is thebraking power as function of time. This tool creates tablesand graphs where both input data and results are shown.

DriveUpgrade - for finding an adequatedrive to replace an oldone.

This on-line tool is ideal for finding a replacement to anexisting ABB drive that may be coming to the end of its

useful life. Simply input some basic information and themodern equivalent drive will be revealed.

Energy Saving Tools - for comparison ofenergy consumptionbetween different flowcontrol methods inpumps and fans, ABBhas developedcalculation tools for

estimating the energy savings that become available whenapplying electric speed control to certain flow machines.Using PumpSave and FanSave tools, AC drive control inpumps and fans can be compared against traditional flowcontrol methods in terms of energy usage. The tools alsoprovide financial figures for assessing the profitability ofpurchasing an ABB drive.

PumpSave - for comparing AC drive control againstthrottling, on/off and hydraulic coupling control inpumps. Calculate how much energy and money youcould be saving with ABB drives while also deriving otherbenefits such as soft starting and stopping, an improvedpower factor and connection into process automation.PumpSave also carries out a simple dimensioning andrecommends an appropriate ABB drive type.

FanSave - for comparing AC drive control againsttraditional flow control methods in fans. Calculate thesavings you can achieve by replacing outlet damper, inletvane or pitch control methods with electronic speedcontrol from an ABB drive. FanSave also providesfinancial and environmental figures concerning thecontrol method retrofit project and recommends a suitableABB drive type.

6-step energy saving plan - ABB has developed sixeasy steps that help determine where AC drives can bestbe used and what could be the potential energy saving.The 6-steps look at the facts behind climate change andthe need to save energy; the actual savings that can bemade; the finance options available to pay for the ACdrives; the different AC drive products available;application references; and an action plan which includestwo on-line energy saving calculator tools.

To discover more, visit: www.abb.co.uk/energy


27

AC motors

Subhead00 - 0000

Making you more competitive

ABB has been manufacturing motors for over 100 years.Our products are designed to be reliable, efficient andcost effective, and we can supply motors for practicallyany application. A full range of services is availablethrough our worldwide service organisation, with thelatest e-Business systems providing round-the-clockaccess, easy ordering and fast delivery.

General Purpose Motors

ABB’s General Purpose Motors are readily available fromcentral stock locations and its ABB Motor ServicePartners (see page 2-3). While designed for standard andstraightforward uses, the motors can be modified to meetmost specifications. Built to the highest manufacturingstandards, the General Purpose Motors use the bestmaterials sourced from around the world. This brings aquality and reliability that can see motors operating forover 30 years. Competitively priced, the motors meet Eff2energy efficient classification, with Eff1 as an option.■ Frame size 56 to 400, 0.09 to 630 kW■ Standard aluminium, steel and cast iron motors■ Open drip-proof motors■ Brake motors■ Single-phase motors■ Integral motors■ High output versions for reduced size and weight■ Wide voltage range■ Low noise levels■ Large base of stocked motors■ Extensive modification possibilities■ Suitable for DOL and variable speed drive applications■ Two years warranty■ Eff2 as a minimum

Process Performance Motors

ABB’s Process Performance Motors are engineered to thetoughest demands of today’s process industries. Thesemotors use the best materials and construction methodsto achieve the highest quality and reliability and apossible operating life of over 30 years. The motordesign is highly adaptable to allow rapid engineeredsolution according to the customer’s specification.■ Frame size 71 to 400, 0.25 to 710 kW■ Cast iron and aluminium frames■ High output versions for reduced size and weight■ Wide voltage range■ Low noise levels■ Long bearing lifetime■ Long service intervals■ Excellent starting characteristics■ Flexible design - suitable for all DOL and

variable speed drive applications■ Engineered to meet all specifications■ Excellent stock availability■ Extensive modification possibilities■ Three years warranty■ Eff1 - high efficiency class

Availability

Through our extended support and services provided bythe ABB Motor Service Partners, ABB provides you witheasy ordering and quick delivery.■ EDI-based ordering■ Over 300,000 motors stocked worldwide■ Most frequently used OEM motors stocked in depth■ 2 to 72 hours delivery for stocked motors■ Modifications within 24 hours


28

AC motors

General purpose aluminium/steel motorsTEFC low voltage motors, aluminium or steel frame, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles0.09 M2VA 56 A 81.00 95.000.12 M2VA 56 B 83.00 96.000.18 M2VA 63 A 84.00 97.000.25 M2VA 63 B 85.00 98.000.37 M2VA 71 A 93.00 106.000.37 M2VA 63 BB 91.00 104.00 HO0.55 M2VA 71 B 100.00 113.000.68 M2VA 71 BB 123.00 140.00 HO0.75 M2VA 80 A 133.00 151.000.75 M2VA 71 BC 126.00 143.00 HO1.1 M2VA 80 B 140.00 161.001.1 M3VA 80 C 175.00 201.00 ECA1.5 M2AA 90 S 152.00 171.001.5 M3AA 90 L 210.00 236.00 ECA1.5 M2VA 80 C 153.00 173.00 HO2.2 M2AA 90 L 188.00 207.002.2 M3AA 90 LB 260.00 286.00 ECA2.7 M3AA 90 LB 241.00 268.00 HO3 M2AA 100 L 228.00 256.003 M3AA 100 LB 317.00 352.00 ECA4 M2AA 112 M 300.00 321.004 M3AA 112 M 367.00 403.00 ECA4 M3AA 100 LB 307.00 337.00 HO5.5 M2AA 132 SA 367.00 396.005.5 M3AA 132 SA 482.00 528.00 ECA5.5 M3AA 112 MB 379.00 410.00 HO7.5 M2AA 132 SB 414.00 440.007.5 M3AA 132 SB 612.00 660.00 ECA9.2 M3AA 132 SBB 652.00 683.00 HO11 M2AA 160 MA 617.00 683.0011 M3AA 160 MA 758.00 839.00 ECA11 M3AA 132 SC 682.00 751.00 HO15 M2AA 160 M 713.00 780.0015 M3AA 160 M 876.00 957.00 ECA18.5 M2AA 160 L 885.00 954.0018.5 M3AA 160 L 1087.00 1171.00 ECA22 M2AA 180 M 1084.00 1150.0022 M3AA 180 M 1331.00 1412.00 ECA22 M3AA 160 LB 1274.00 1354.00 HO30 M2AA 200 LA 1401.00 1486.0030 M3AA 200 MLA 1721.00 1825.00 ECA30 M3AA 180 LB 1618.00 1709.00 HO37 M2AA 200 L 1638.00 1635.0037 M3AA 200 MLB 1893.00 2008.00 ECA45 M2AA 225 M 2634.00 2745.0045 M3AA 225 SMB 3234.00 3372.00 ECA45 M3AA 200 MLC 2890.00 3005.00 HO55 M2AA 250 M 3082.00 3203.0055 M3AA 250 SMA 3784.00 3934.00 ECA55 M3AA 200 MLD 3463.00 3600.00 HO55 M3AA 225 SMC 3647.00 3784.00 HO75 M2CA 280 SA 4049.00 4298.00 ECA75 M3AA 280 SMA 4804.00 4930.00 ECA75 M3AA 250 SMB 4701.00 4827.00 HO80 M3AA 225 SMD 4518.00 4645.00 HO90 M2CA 280 SMA 4863.00 5113.00 ECA90 M3AA 280 SMB 5630.00 5779.00 ECA

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles0.06 M2VA 56 A 77.00 90.000.09 M2VA 56 B 79.00 92.000.12 M2VA 63 B 80.00 93.000.18 M2VA 63 B 82.00 95.000.25 M2VA 71 A 88.00 101.000.25 M2VA 63 BB 86.00 99.00 HO0.37 M2VA 71 B 94.00 106.000.45 M2VA 71 BB 94.00 121.00 HO0.55 M2VA 71 C 117.00 135.00 HO0.55 M2VA 80 A 126.00 145.000.75 M2VA 80 B 129.00 148.000.95 M2VA 80 C 126.00 154.00 HO1.1 M2AA 90 S 144.00 162.001.1 M3AA 90L 215.00 238.00 ECA1.5 M2AA 90 L 171.00 192.001.5 M3AA 100 LA 260.00 282.00 ECA1.85 M3AA 90 L 215.00 241.00 HO2.2 M2AA 100 LA 202.00 226.002.2 M3AA 100 LC 295.00 330.00 ECA2.2 M3AA 90 LB 215.00 241.00 HO3 M2AA 100 LB 221.00 247.003 M3AA 112MA 388.00 423.00 ECA4 M2AA 112 M 288.00 316.004 M3AA 112MA 388.00 423.00 ECA4 M3AA 100 LC 287.00 317.00 HO5.5 M2AA 132 S 376.00 407.005.5 M3AA 132 S 496.00 542.00 ECA5.5 M3AA 112 MB 380.00 412.00 HO7.5 M2AA 132 M 448.00 476.007.5 M3AA 132 M 640.00 686.00 ECA9.2 M3AA 132 MBA 668.00 699.00 HO11 M2AA 160 M 707.00 784.0011 M3AA 160 M 763.00 844.00 ECA11 M3AA 132 MB 697.00 767.00 HO15 M2AA 160 L 848.00 922.0015 M3AA 160 L 914.00 994.00 ECA18.5 M2AA 180 M 935.00 1000.0018.5 M3AA 180 M 1147.00 1228.00 ECA18.5 M3AA 160 LB 1090.00 1171.00 HO22 M2AA 180 L 1244.00 1308.0022 M3AA 180 L 1354.00 1423.00 ECA30 M2AA 200 L 1515.00 1578.0030 M3AA 200 MLB 1687.00 1767.00 ECA30 M3AA 180 LB 1606.00 1687.00 HO37 M2AA 225 S 1849.00 1980.0037 M3AA 225 SMA 2271.00 2431.00 ECA37 M3AA 200 MLB 2020.00 2100.00 HO45 M2AA 225 M 2251.00 2382.0045 M3AA 225 SMB 2764.00 2925.00 ECA48 M3AA 200 MLC 2913.00 3039.00 HO55 M2AA 250 M 2690.00 2801.0055 M3AA 250 SMA 3303.00 3440.00 ECA55 M3AA 225 SMC 3165.00 3303.00 HO75 M3AA 280 SMA 4357.00 4507.00 ECA75 M2CA 280 SA 3919.00 4168.00 ECA73 M3AA 225 SMD 4105.00 4232.00 HO75 M3AA 250 SMB 4357.00 4507.00 HO

HO High-output design(Possibly class F temp. rise, please see catalogue for details)

ECA ECA Compliant


29

AC motors

General purpose aluminium/steel motors (continued)TEFC low voltage motors, aluminium or steel frame, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles0.37 M2QA 71 M2A 91.00 102.000.55 M2QA 71 M2B 98.00 107.000.75 M2QA 80 M2A 124.00 139.001.1 M2QA 80 M2B 131.00 145.001.5 M2QA 90 S2A 137.00 152.002.2 M2QA 90 L2A 171.00 185.003 M2QA 100 L2A 200.00 224.004 M2QA 112 M2A 260.00 293.005.5 M2QA 132 S2A 316.00 340.005.5 M2QA 112 L2A 300.00 315.00 HO7.5 M2QA 132 S2B 380.00 414.009.2 M2QA 132 M2A 460.00 480.00 HO11 M2QA 160 M2A 594.00 654.0011 M2QA 132 M2B 550.00 580.00 HO15 M2QA 160 M2B 705.00 770.0018.5 M2QA 160 L2A 869.00 918.0022 M2QA 180 M2A 1009.00 1049.0022 M2QA 160 L2B 950.00 980.00 HO30 M2QA 200 L2A 1360.00 1420.0030 M2QA 180 L2A 1230.00 1270.00 HO37 M2QA 200 L2B 1764.00 1833.0045 M2QA 225 M2A 2532.00 2621.0045 M2QA 200 L2C 2430.00 2430.00 HO55 M2QA 250 M2A 3031.00 3129.0055 M2QA 225 M2B 2850.00 2940.00 HO75 M2BAT 280 SMA 5110.00 5405.0075 M2QA 250 M2B 3700.00 3790.00 HO90 M2BAT 280 SMB 5820.00 5995.00110 M2BAT 315 SMA 7666.00 7916.00110 M2BAT 280 SMC 7534.00 7785.00 HO132 M2BAT 315 SMB 8473.00 8735.00160 M2BAT 315 SMC 9686.00 9947.00200 M2BAT 315 MLA 14849.00 15067.00 ECA250 M2BAT 355 S 19107.00 19762.00

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles 0.25 M2QA 71 M4A 86.00 96.000.37 M2QA 71 M4B 91.00 102.000.55 M2QA 80 M4A 117.00 132.000.75 M2QA 80 M4B 120.00 134.001.1 M2QA 90 S4A 131.00 145.001.5 M2QA 90 L4A 158.00 171.002.2 M2QA 100 L4A 179.00 200.003 M2QA 100 L4B 204.00 227.004 M2QA 112 M4A 253.00 273.005.5 M2QA 132 S4A 323.00 346.005.5 M2QA 112 L4A 303.00 326.00 HO7.5 M2QA 132 M4A 398.00 422.009.2 M2QA 132 M4B 440.00 464.00 HO11 M2QA 160 M4A 589.00 649.0011 M2QA 132 M4C 555.00 610.00 HO15 M2QA 160 L4A 734.00 807.0018.5 M2QA 180 M4A 878.00 935.0022 M2QA 180 L4A 1049.00 1090.0022 M2QA 160 L4B 810.00 880.00 HO30 M2QA 200 L4A 1377.00 1451.0030 M2QA 180 L4B 1250.00 1320.00 HO37 M2QA 225 S4A 1851.00 1950.0045 M2QA 225 M4A 2172.00 2278.0045 M2QA 200 L4B 1720.00 1820.00 HO55 M2QA 250 M4A 2621.00 2744.0055 M2QA 225 M4B 2540.00 2640.00 HO75 M2BAT 280 SMA 4357.00 4619.0075 M2QA 250 M4B 3600.00 3700.00 HO90 M2BAT 280 SMB 5231.00 5504.00110 M2BAT 280 SMC 5569.00 5842.00 HO110 M2BAT 315 SMA 6453.00 6738.00132 M2BAT 315 SMB 7621.00 7884.00160 M2BAT 315 SMC 8910.00 9172.00200 M2BAT 315 MLA 12665.00 12993.00250 M2BAT 355 S 14958.00 15395.00

HO High-output design(Possibly class F temp. rise, please see catalogue for details)

ECA ECA Compliant

General purpose cast iron motorsTEFC low voltage motors, cast iron frame, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles95 M3AA 250 SMC 5527.00 5676.00 HO110 M2CA 315 SA 5938.00 6350.00 ECA110 M2CA 280 MB 5569.00 5817.00 HO132 M2CA 315 SMA 7174.00 7587.00 ECA132 M2CA 280 MC 6740.00 6989.00 HO ECA160 M2CA 315 MB 8899.00 9312.00 ECA160 M2CA 280 MD 8369.00 8618.00 HO200 M2CA 315 LA 11179.00 11612.00 ECA200 M2CA 355 SA 11830.00 12589.00 ECA250 M2CA 355 MA 14108.00 14868.00 ECA250 M2CA 315 LB 13240.00 13675.00 HO280 M2CA 355 MB 16170.00 16930.00315 M2CA 355 LA 17690.00 18449.00 ECA315 M2CA 315 LC 16605.00 17039.00 HO355 M2CA 355 LB 19427.00 20186.00400 M2CA 400 MLA 23441.00 24418.00 ECA450 M2CA 400 MLB 26697.00 27673.00500 M2CA 400 LKA 28542.00 29518.00560 M2CA 400 LKB 32014.00 32990.00

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles90 M3AA 280 SMB 5113.00 5251.00 ECA90 M2CA 280 SMA 4581.00 4830.00 ECA95 M3AA 250 SMC 6433.00 6663.00 HO110 M2CA 315 SA 5687.00 6100.00 ECA110 M2CA 280 MB 5297.00 5547.00 HO ECA132 M2CA 315 SMA 6850.00 7261.00 ECA132 M2CA 280 MC 6436.00 6686.00 HO ECA160 M2CA 315 MB 8291.00 8705.00 ECA160 M2CA 280 MD 7794.00 8042.00 HO ECA200 M2CA 315 LA 10528.00 10961.00 ECA200 M2CA 355 SA 10961.00 11721.00 ECA250 M2CA 355 MA 13023.00 13783.00 ECA250 M2CA 315 LB 12264.00 12698.00 HO ECA315 M2CA 355 LA 16605.00 17363.00 ECA315 M2CA 315 LC 15628.00 16061.00 HO ECA355 M2CA 355 LB 18776.00 19534.00 ECA400 M2CA 355 LKD 20837.00 21597.00 ECA450 M2CA 400 MLA 24635.00 25611.00500 M2CA 400 MLB 27457.00 28432.00560 M2CA 400 LKA 29734.00 30712.00630 M2CA 400 LKB 33100.00 34075.00


30

AC motors

Process performance cast iron motorsTEFC low voltage motors, cast iron frame, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles0.37 M2BA 71 M2 A 125.00 140.000.55 M2BA 71 M2 B 134.00 146.000.75 M2BA 80 M2 A 170.00 190.001.1 M2BA 80 M2 B 179.00 198.001.5 M2BA 90 S2 A 188.00 209.00 2)2.2 M2BA 90 L2 A 234.00 253.00 2)3 M2BA 100 L2 A 277.00 307.00 2)4 M2BA 112 M2 A 357.00 400.00 2)5.5 M2BA 132 S2 A 433.00 467.00 2)7.5 M2BA 132 S2 B 521.00 569.00 2)11 M3BP 160 MA 814.00 898.00 ECA15 M3BP 160 M 969.00 1057.00 ECA18.5 M3BP 160 L 1182.00 1261.00 ECA22 M3BP 180 M 1441.00 1508.00 ECA22 M3BP 160 LB 1385.00 1441.00 HO ECA30 M3BP 200 MLA 1868.00 1946.00 ECA30 M3BP 180 LB 1744.00 1846.00 HO ECA37 M3BP 200 MLB 2138.00 2250.00 ECA45 M3BP 225 SMB 3476.00 3599.00 ECA45 M3BP 200 MLC 3128.00 3241.00 HO ECA55 M3BP 250 SMA 4162.00 4298.00 ECA55 M3BP 225 SMC 3982.00 4140.00 HO ECA75 M3BP 280 SMA 5367.00 5676.00 ECA75 M3BP 250 SMB 5023.00 5568.00 HO ECA90 M3BP 280 SMB 6111.00 6295.00 ECA110 M3BP 315 SMA 8049.00 8313.00 ECA110 M3BP 280 SMC 7749.00 8073.00 HO ECA132 M3BP 315 SMB 8897.00 9172.00 ECA160 M3BP 315 SMC 10171.00 10446.00 ECA200 M3BP 315 MLA 14160.00 15537.00 ECA250 M3BP 355 SMA 17918.00 18795.00 ECA250 M3BP 315 LKA 16791.00 17292.00 HO ECA315 M3BP 355 SMB 22553.00 23431.00 ECA315 M3BP 315 LKC 21051.00 21552.00 HO ECA355 M3BP 355 SMC 25437.00 26313.00 ECA400 M3BP 355 MLA 28443.00 29320.00 ECA450 M3BP 355 MLB 32453.00 33330.00500 M3BP 355 LKA 34582.00 35459.00560 M3BP 355 LKB 38842.00 39720.00560 M3BP 400 LA 40722.00 41849.00560 M3BP 400 LKA 41835.00 42962.00630 M3BP 400 LB 45232.00 46360.00630 M3BP 400 LKB 46345.00 47473.00710 M3BP 400 LC 50996.00 52122.00710 M3BP 400 LKC 52109.00 53235.00

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles0.25 M2BA 71 M4 A 119.00 132.000.37 M2BA 71 M4 B 125.00 140.000.55 M2BA 80 M4 A 160.00 180.000.75 M2BA 80 M4 B 164.00 184.001.1 M2BA 90 S4 A 179.00 198.001.5 M2BA 90 L4 A 216.00 235.002.2 M2BA 100 L4 A 246.00 277.003 M2BA 100 L4 B 280.00 313.004 M2BA 112 M4 A 348.00 375.005.5 M2BA 132 S4 A 443.00 475.007.5 M2BA 132 M4 A 546.00 578.0011 M3BP 160 M 808.00 890.00 ECA15 M3BP 160 L 1007.00 1108.00 ECA18.5 M3BP 180 M 1206.00 1284.00 ECA18.5 M3BP 160 LB 1149.00 1238.00 HO22 M3BP 180 L 1441.00 1497.00 ECA30 M3BP 200 MLB 1891.00 1993.00 ECA30 M3BP 180 LB 1688.00 1790.00 HO37 M3BP 225 SMA 2543.00 2678.00 ECA37 M3BP 200 MLB 2341.00 2487.00 HO45 M3BP 225 SMB 2981.00 3128.00 ECA55 M3BP 250 SMA 3599.00 3769.00 ECA55 M3BP 225 SMC 3499.00 3667.00 HO75 M3BP 280 SMA 4575.00 4850.00 ECA75 M3BP 250 SMB 4331.00 4612.00 HO ECA90 M3BP 280 SMB 5493.00 5780.00 ECA110 M3BP 315 SMA 6777.00 7075.00 ECA110 M3BP 280 SMC 6576.00 6876.00 HO ECA132 M3BP 315 SMB 8004.00 8279.00 ECA160 M3BP 315 SMC 9356.00 9631.00 ECA200 M3BP 315 MLA 13299.00 13643.00 ECA250 M3BP 355 SMA 15706.00 16165.00 ECA250 M3BP 315 LKA 14560.00 15019.00 HO ECA280 M3BP 315 LKB 18000.00 18457.00 HO ECA315 M3BP 355 SMB 20865.00 21553.00 ECA315 M3BP 315 LKC 19718.00 20177.00 HO ECA355 M3BP 355 SMC 22241.00 22928.00 ECA400 M3BP 355 MLA 25221.00 25680.00 ECA450 M3BP 355 MLB 28546.00 28776.00500 M3BP 355 LKA 31641.00 31871.00560 M3BP 355 LKB 34508.00 34737.00560 M3BP 400 LA 36227.00 36685.00560 M3BP 400LKA 36227.00 36685.00630 M3BP 400 LB 40240.00 40697.00630 M3BP 400 LKB 42225.00 43352.00710 M3BP 400 LC 47613.00 48740.00710 M3BP 400 LKC 48726.00 49853.00

HO High-output designECA ECA Compliant2) Eff2 Efficiency


31

AC motors

Flameproof motors, 80-400 - EEx d/e* IIB T4TEFC low voltage motors, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles0.37 MJA/KA 71A 390.00 450.000.55 MJA/KA 71B 416.00 476.000.75 M2JA/KA 80 LS 540.00 575.001.1 M2JA/KA 80 L 566.00 621.001.5 M2JA/KA 90 S 627.00 680.002.2 M2JA/KA 90 L 742.00 791.003 M2JA/KA 100 L 788.00 840.004 M2JA/KA 112 M 978.00 1043.005.5 M2JA/KA 132 SA 1137.00 1197.007.5 M2JA/KA 132 SB 1449.00 1497.0011 M3JP/KP 160 MLA 1676.00 1796.00 ECA15 M3JP/KP 160 MLB 1988.00 2071.00 ECA18.5 M3JP/KP 160 MLC 2262.00 2323.00 ECA22 M3JP/KP 180 MLA 2801.00 2897.00 ECA22 M3JP/KP 160 MLD 2633.00 2718.00 HO30 M3JP/KP 200 MLA 3567.00 3710.00 ECA30 M3JP/KP 180 MLB 3339.00 3436.00 HO37 M3JP/KP 200 MLC 4739.00 4955.00 ECA37 M3JP/KP 180 MLC 4675.00 - HO45 M3JP/KP 225 SMB 6414.00 6653.00 ECA45 M3JP/KP 200 MLE 6042.00 - HO55 M3JP/KP 250 SMA 8436.00 8748.00 ECA55 M3JP/KP 225 SMC 7923.00 8222.00 HO67 M3JP/KP 225 SMD 8962.00 - HO75 M3JP/KP 280 SMA 11439.00 11822.00 ECA75 M3JP/KP 250 SMB 10685.00 11056.00 HO ECA90 M3JP/KP 280 SMB 14958.00 15437.00 ECA90 M3JP/KP 250 SMC 11954.00 - HO110 M3JP/KP 315 SMA 18068.00 18427.00 ECA110 M3JP/KP 280 SMC 16991.00 17351.00 HO ECA132 M3JP/KP 315 SMB 21418.00 21776.00 ECA160 M3JP/KP 315 SMC 24290.00 24648.00 ECA200 M3JP/KP 315 MLA 30511.00 30870.00 ECA250 M3JP/KP 355 SMA 33235.00 34201.00 ECA315 M3JP/KP 355 SMB 40407.00 41372.00 ECA355 M3JP/KP 355 SMC 43440.00 44405.00 ECA400 M3JP/KP 355 MLA 48129.00 49094.00 ECA400 M2JA/KA 400 M 61261.00 - ECA450 M3JP/KP 355 MLB 53783.00 54749.00450 M2JA/KA 400 MA 69038.00 -500 M3JP/KP 355 LKA 62609.00 63574.00500 M2JA/KA 400 LKA 76814.00 78968.00560 M2JA/KA 400 LKB 86028.00 88540.00

HO High-output designECA ECA Compliant

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles 0.25 MJA/KA 71A 386.00 446.000.37 MJA/KA 71B 412.00 472.000.55 M2JA/KA 80 LS 494.00 540.000.75 M2JA/KA 80 L 516.00 566.001.1 M2JA/KA 90 S 550.00 599.001.5 M2JA/KA 90 L 604.00 657.002.2 M2JA/KA 100 LA 660.00 713.003 M2JA/KA 100 LB 860.00 911.004 M2JA/KA 112 M 918.00 986.005.5 M2JA/KA 132 S 1215.00 1284.007.5 M2JA/KA 132 M 1353.00 1425.0011 M3JP/KP 160 MLC 1688.00 1772.00 ECA15 M3JP/KP 160 MLE 2095.00 2167.00 ECA18.5 M3JP/KP 180 MLA 2622.00 2729.00 ECA18.5 M3JP/KP 160 MLF 2466.00 2537.00 HO ECA22 M3JP/KP 180 MLB 2909.00 3016.00 ECA30 M3JP/KP 200 MLB 3639.00 3771.00 ECA30 M3JP/KP 180 MLC 3411.00 3506.00 HO37 M3JP/KP 225 SMB 4477.00 4644.00 ECA37 M3JP/KP 200 MLC 4153.00 4297.00 HO45 M3JP/KP 225 SMC 5290.00 5469.00 ECA55 M3JP/KP 250 SMA 6486.00 6797.00 ECA55 M3JP/KP 225 SMD 6127.00 6426.00 HO75 M3JP/KP 280 SMA 8509.00 8902.00 ECA75 M3JP/KP 250 SMB 8006.00 8376.00 HO ECA90 M3JP/KP 280 SMB 11727.00 12086.00 ECA110 M3JP/KP 315 SMA 13402.00 13880.00 ECA110 M3JP/KP 280 SMC 13282.00 13641.00 HO ECA132 M3JP/KP 315 SMB 16393.00 16751.00 ECA160 M3JP/KP 315 SMC 18068.00 18427.00 ECA200 M3JP/KP 315 MLA 23811.00 24169.00 ECA250 M3JP/KP 355 SMA 29794.00 30631.00 ECA315 M3JP/KP 355 SMB 37571.00 38408.00 ECA355 M3JP/KP 355 SMC 42356.00 43194.00 ECA400 M3JP/KP 355 MLA 47621.00 48698.00 ECA400 M2JA/KA 400 M 47621.00 - ECA450 M3JP/KP 355 MLB 52955.00 53920.00450 M2JA/KA 400 MA 53724.00 -500 M2JA/KA 400 MB 59706.00 -500 M3JP/KP 355 LKA 58609.00 59574.00560 M3JP/KP 355 LKB 66746.00 67986.00630 M2JA/KA 400 LKB 75140.00 77892.00

* JA/JP EExd

* KA/KP EExde

ATEXC e r t i f i e d


32

AC motors

Non-sparking motors, 80-400, EExnA T3 cast iron frameTEFC low voltage motors, IP 55, IC 411, single-speed

Output Frame Size Foot FlangekW Price Price3000 r/min = 2 poles0.37 M2BA 71 M2 A 221.00 240.000.55 M2BA 71 M2 B 233.00 253.000.75 M2BA 80 M2 A 249.00 270.001.1 M2BA 80 M2 B 267.00 290.001.5 M2BA 90 S2 A 304.00 331.002.2 M2BA 90 L2 A 358.00 386.003 M2BA 100 L2 A 409.00 443.004 M2BA 112 M2 A 488.00 528.005.5 M2BA 132 S2 A 599.00 652.007.5 M2BA 132 S2 B 726.00 780.0011 M3GP 160 MLA 1028.00 1125.0015 M3GP 160 MLB 1208.00 1335.00 ECA18.5 M3GP 160 MLC 1465.00 1558.00 ECA22 M3GP 180 MLA 1768.00 1859.00 ECA22 M3GP 160 MLD 1688.00 1754.00 HO ECA30 M3GP 200 MLA 2263.00 2355.00 ECA30 M3GP 180 MLB 2133.00 2238.00 HO ECA37 M3GP 200 MLC 3728.00 3860.00 ECA37 M3GP 180 MLC 3451.00 3451.00 HO ECA45 M3GP 225 SMB 4133.00 4278.00 ECA45 M3GP 200 MLE 3679.00 3846.00 HO ECA55 M3GP 250 SMA 4931.00 5089.00 ECA55 M3GP 225 SMC 4722.00 4906.00 HO ECA67 M3GP 225 SMD 5441.00 5638.00 HO ECA75 M3GP 280 SMA 6226.00 6566.00 ECA75 M3GP 250 SMB 6226.00 6566.00 HO ECA90 M3GP 280 SMB 7417.00 7627.00 ECA90 M3GP 250 SMC 6914.00 7142.00 HO ECA110 M3GP 315 SMA 9718.00 10020.00 ECA110 M3GP 280 SMC 9626.00 9928.00 HO ECA132 M3GP 315 SMB 10685.00 10999.00 ECA160 M3GP 315 SMC 12150.00 12451.00 ECA200 M3GP 315 MLA 18309.00 18572.00 ECA250 M3GP 355 SMA 19997.00 20962.00 ECA315 M3GP 355 SMB 25099.00 26066.00 ECA355 M3GP 355 SMC 28271.00 29237.00 ECA400 M3GP 355 MLA 31581.00 32546.00 ECA450 M3GP 355 MLB 35993.00 36959.00500 M3GP 355 LKA 38338.00 39303.00560 M3GP 355 LKB 43026.00 43992.00560 M3GP 400 LA 45000.00 45900.00560 M3GP 400 LKA 45000.00 45900.00630 M3GP 400 LB 47500.00 48400.00630 M3GP 400 LKB 47500.00 48400.00710 M3GP 400 LC 53000.00 53900.00710 M3GP 400 LKC 53000.00 53900.00

Output Frame Size Foot FlangekW Price Price1500 r/min = 4 poles 0.25 M2BA 71 M4 A 217.00 238.000.37 M2BA 71 M4 B 228.00 249.000.55 M2BA 80 M4 A 243.00 264.000.75 M2BA 80 M4 B 254.00 277.001.1 M2BA 90 S4 A 289.00 316.001.5 M2BA 90 L4 A 319.00 345.002.2 M2BA 100 L4 A 366.00 399.003 M2BA 100 L4 B 415.00 450.004 M2BA 112 M4 A 508.00 548.005.5 M2BA 132 S4 A 613.00 667.007.5 M2BA 132 M4 A 753.00 807.0011 M3GP 160 MLC 1023.00 1118.00 ECA15 M3GP 160 MLE 1275.00 1370.00 ECA18.5 M3GP 180 MLA 1493.00 1598.00 ECA18.5 M3GP 160 MLF 1426.00 1518.00 HO ECA22 M3GP 180 MLB 1768.00 1859.00 ECA22 M3GP 160 MLG 1682.00 1682.00 HO ECA30 M3GP 200 MLB 2291.00 2421.00 ECA30 M3GP 180 MLC 2054.00 2173.00 HO ECA37 M3GP 225 SMB 3049.00 3205.00 ECA37 M3GP 200 MLC 2813.00 2982.00 HO ECA45 M3GP 225 SMC 3558.00 3728.00 ECA55 M3GP 250 SMA 4278.00 4475.00 ECA55 M3GP 225 SMD 4161.00 4356.00 HO ECA60 M3GP 225 SME 4696.00 4893.00 HO ECA75 M3GP 280 SMA 5364.00 5664.00 ECA75 M3GP 250 SMB 5120.00 5454.00 HO ECA90 M3GP 280 SMB 6710.00 7038.00 ECA90 M3GP 250 SMC 6567.00 6845.00 HO ECA110 M3GP 315 SMA 8266.00 8606.00 ECA110 M3GP 280 SMC 8161.00 8515.00 HO ECA132 M3GP 315 SMB 9667.00 9980.00 ECA160 M3GP 315 SMC 11209.00 11666.00 ECA200 M3GP 315 MLA 15694.00 16088.00 ECA250 M3GP 355 SMA 18618.00 19583.00 ECA315 M3GP 355 SMB 23582.00 24548.00 ECA355 M3GP 355 SMC 26616.00 27581.00 ECA400 M3GP 355 MLA 29512.00 30477.00 ECA450 M3GP 355 MLB 36959.00 37924.00500 M3GP 355 LKA 37500.00 38900.00560 M3GP 400 LA 42000.00 43500.00560 M3GP 400 LKA 42000.00 43500.00630 M3GP 400 LB 45000.00 47000.00630 M3GP 400 LKB 45000.00 47000.00710 M3GP 400 LC 49500.00 51500.00710 M3GP 400 LKC 49500.00 51500.00

HO High-output designECA ECA Compliant

ATEXC e r t i f i e d


33

AC motors

Optional extras for all motor types

Option Description Modification Motor 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400Code types

Auxilliary Terminal Box 418 ● N N N N N N N 247 247 247 247 247 218 218 218 218for accessories 418 ■ N 242 242 242 242 242 242 242 242 242 242 242 242 242 242 242

418 ▲ N N N N N N N N N 329 329 329 329 329 329 329

Balancing to Grade R 52 ● 51 51 51 51 51 79 79 97 147 176 282 344 321 349 417 48752 ■ N 59 59 59 59 79 79 97 147 176 282 344 321 349 417 48752 ▲ N N 59 59 59 79 79 97 147 176 282 344 321 349 417 487

British Standard Sliderails ● 51 51 51 51 74 74 74 105 105 195 195 328 328 624 624 624■ N 51 51 51 74 74 74 105 105 195 195 328 328 624 624 624▲ N N 51 51 74 74 74 105 105 195 195 328 328 624 624 624

Degree of Protection IP56 403 ● N N N N N 207 207 269 269 269 269 269 244 268 283 328403 ■ N 163 163 163 163 203 203 238 238 238 238 238 244 268 283 328403 ▲ N N 163 163 163 203 203 238 238 238 238 238 244 268 283 328

Degree of Protection IP65 158 ● 163 163 163 163 163 207 207 269 269 269 269 269 244 268 283 328158 ■ N 163 163 163 163 207 207 269 269 269 269 269 244 268 283 328158 ▲ N N 163 163 163 207 207 269 269 269 269 269 R R R R

EExd motor for Gas Group IIC 461 ▲ N N 59 70 93 117 152 244 427 609 792 974 1461 2435 4870 7305

External Earth Bolt 67 ● 45 45 45 45 45 45 45 81 81 81 81 81 81 81 81 8167 ■ N 68 68 68 68 68 68 81 81 81 81 81 81 81 81 8167 ▲ N N S S S S S S S S S S S S S S

Foot and Face Mounting 8 ● 85 85 85 85 85 111 111 N N N N N N N N N8 ■ N 61 61 61 61 88 88 N N N N N N N N N8 ▲ N N 53 53 53 76 98 N N N N N N N N N

Foot and Flange Mounting 9 ● 85 85 85 85 85 111 111 217 217 290 290 317 280 487 853 10969 ■ N 61 61 61 61 88 88 192 192 256 256 280 280 487 853 10969 ▲ N N 53 53 53 76 98 192 192 256 256 281 280 487 853 1096

Heating Element specify 450/451 ● 155 155 155 155 155 173 173 214 236 264 301 362 332 332 369 369120V or 240V 450/451 ■ N 155 155 155 155 173 173 214 236 264 301 362 332 332 369 369

450/451 ▲ N N 155 155 155 173 173 214 236 264 301 362 332 332 369 369

Insulated bearing at NDE. 701 ● R R R R R R R R R R R R 792 792 1096 1096Frame 280 and above on 701 ■ R R R R R R R R R R R R 792 792 1096 1096variable speed drives. 701 ▲ R R R R R R R R R R R R 792 792 1096 1096

Metal Fan 68 ● 99 99 99 99 99 138 138 204 204 220 231 231 385 411 439 43968 ■ N 95 95 95 95 136 136 181 181 194 204 204 385 411 439 43968 ▲ N N 93 111 111 117 117 181 181 194 204 204 385 411 439 439

Metal Fan Cover 53 ● 66 66 66 66 66 89 89 S S S S S S S S S53 ■ N S S S S S S S S S S S S S S S53 ▲ N N S S S S S S S S S S S S S S

Paint colour to standard RAL 114 ● 141 141 141 141 141 138 138 173 173 173 173 173 173 173 173 173specify RAL no. 114 ■ N 141 141 141 141 140 140 173 173 173 173 173 173 173 173 173

114 ▲ N N 141 141 141 140 140 173 173 173 173 173 173 173 173 173

PT100 Resistance element 445 ● N N N N N 424 424 424 424 629 629 629 609 609 609 609one per phase 445 ■ N R R R R 424 424 424 424 629 629 629 609 609 609 609

445 ▲ N N 424 424 424 424 424 424 424 629 629 629 609 609 609 609

PTC Thermistors 3 in series, 435 ● 86 86 86 86 86 111 111 166 166 166 166 166 147 147 147 147130°C others on request 435 ■ N 86 86 86 86 111 111 166 166 166 166 166 147 147 147 147

435 ▲ N N 86 86 86 111 111 166 166 166 166 166 147 147 147 147

Rain Canopy for VI Mounting 5 ● 71 71 71 71 71 83 83 97 111 118 158 196 243 288 430 430(mandatory on Ex motors) 5 ■ N 71 71 71 71 83 83 97 111 118 158 196 243 288 430 430

5 ▲ N N 71 71 71 83 83 97 111 118 158 196 243 288 430 430

Roller Bearing at DE 37 ● N N N N N N N 173 200 228 262 290 256 256 375 R(not available on IIC motors) 37 ■ N N N N N N N 173 200 228 262 290 256 256 375 375

37 ▲ N N N N N N N 173 200 228 262 290 256 256 375 375

Separate (Fixed speed) 183 ● 253 253 253 253 253 621 621 786 896 1255 1475 1723 N N N Nmotor cooling fan 183 ■ N R R R 676 812 1014 1108 1108 1108 1303 1522 1693 2131 2313 2496

183 ▲ N N N N N N N 1413 1510 2046 2046 2265 2642 3080 3263 3446

Special winding insulation 405 ● N N N N N 552 552 690 690 858 858 858 N N N Nfor use with a variable 405 ■ N N N N N N N 609 609 758 758 758 758 867 1279 1571speed drive V>500V 405 ▲ N N 436 436 436 436 436 457 457 592 630 648 758 867 1279 1571

SPM Nipples 43 ● N N N N N 101 101 176 198 221 229 229 229 229 229 22943 ■ N N N N N N N 176 198 221 229 229 229 229 S S43 ▲ N N N N N N N 176 198 221 229 229 229 229 S S

Test - Routine 148 ● 136 136 136 136 136 152 152 152 152 159 159 159 159 159 159 159148 ■ N 136 136 136 136 152 152 152 152 159 159 159 159 159 159 159148 ▲ N N 136 136 136 152 152 152 152 159 159 159 159 159 159 159

Test - Type test report from 145 ● 57 57 57 57 57 56 56 56 56 83 83 83 122 122 122 122test of an identical motor 145 ■ N 57 57 57 57 56 56 56 56 83 83 83 122 122 122 122(where available)

● Alloy■ Cast iron▲ Flameproof

N Not availableR On requestS Standard

Please contact ABB if you require optional extras that are not listed above


34

ABB LV motors - total market offer

Additional ABB motors

General Purpose Motors

56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400

Process Performance Motors

56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400

Hazardous area, Marine motors

56 63 71 80 90 100 112 132 160 180 200 225 250 280 315 355 400

General Purpose Motors Process Performance Motors Special Motors

* Standard applications * Demanding applications * Roller table motors

* Perfect for OEM’s * Perfect for end-customers & OEM’s * High speed motors

* Excellent availability * Short lead times, engineered to all applications * Permanent magnet motors

* Large number of variants * Large number of variants as standard * Water cooled motors

* eff2, eff1 as option * Reliable, energy saving * Motors with adjusted brake

* eff1 * Wind turbine generators

Steel motors

Aluminium motors, option with eff1 efficiency

Cast iron motors

Aluminium motors, basic offer with eff2 efficiency

Open drip proof motorsBrake motors

Single-phase

Cast iron motors

DIP motors (al 90-250, cast iron 71-355)H

azar

do

us a

reas

Steel motors

Aluminium motors

Flameproof motors

Increased safety motors (al 90-250, cast iron 80-400)

Non-sparking motors (al 90-250, cast iron 71-400)

Aluminium motors

Cast iron motors

Open drip proof motors

Mar

ine


ABB Limited, 9 The Towers, Wilmslow Road, Didsbury, Manchester M20 2AB United Kingdom

Telephone: +44 (0) 161 445 5555

35

Fax to ABB: 020 8667 9426FAXBACK

Your address

Your application

Name:

Position:

Company:

Address:

Postcode:

Telephone:

Telefax:

E-mail:

Driven machinery (eg fan, pump, extruder, conveyor etc)

Number of drives/motors and their nominal power rating (kW)

Speed range (lowest to highest)

Supply voltage (single or three phase)

Motor nameplate details if fitting to existing motor or Motor requirements if new motor required

Special requirements (eg. use in hazardous areas)

Other details

Technical Update

Services and Software Tools

AC drives

AC motors

FactFilesCE Marking of explosion proof motors ❏Raising environmental standards with ISO 14001 ❏European agreement on low voltage electric motor efficiency ❏Bearing currents in modern drive systems ❏Metric threads for cable glands on three-phase AC motors ❏Motor control with DTC ❏EMC compliant installation for a power drive system ❏CE Marking of Dust Ignition Proof Motors ❏Reducing harmonics caused by variable speed drives ❏Electric motor efficiency changes in North America ❏Starting methods for AC motors ❏Testing temperature rise in induction asynchronous motors ❏Compliance to EN50021 by explosion proof motors, Eex nA ❏Dimensioning of a drive system ❏Braking a drives system ❏The world of ABB LV Motors (voltages and frequencies worldwide) ❏

Technical GuidesDirect Torque Control ❏EU Directive & Power Drive Systems ❏EMC Compliant Installation ❏Guide to Variable Speed Drives ❏Bearing Currents in AC Drive Systems ❏Guide to Harmonics with AC Drives ❏Dimensioning of a Drive System ❏Electrical Braking ❏

Services ❏ Drives Software ❏

ABB component driveACS50, 0.18 to 2.2 kW; ACS100, 0.12 kW - 2.2 kW ❏ABB general machinery driveACS140, 0.12 kW - 2.2 kW ❏ABB decentralised driveACS160, 0.55 kW - 2.2 kW ❏ABB standard drive ACS550, 0.75 - 355 kW ❏ABB industrial driveACS800, stand-alone single drive, 0.55 - 2,800 kW ❏ACS800 multidrive, 1.5 kW - 5,600 kW ❏ABB medium voltage drive ACS1000 MV drive - 315 kW to 5,000 kW ❏ACS1000i - Integrated Medium Voltage AC Drive ❏ACS6000 MV drive 3 - 27 MW ❏Power quality filters ❏

Standard DC Drives 20 to 1,000 A DCS400 Digital DC converter ❏Industrial DC Drives 20 to 5,200 ADCS500 Digital Thyristor converter ❏

DMI motors ❏DMP motors ❏

Motors 400 V 50 Hz - Motors for all applications (28 pages) ❏Low voltage general purpose motors (228 pages) ❏Low and high voltage process performance motors (144 pages) ❏Flameproof motors ❏Increased safety motors ❏Non-sparking motors ❏Motors for dust ignition protection ❏Marine motors ❏Large AC machinesHXR cage induction machine ❏High voltage modular induction motors ❏Wound rotor induction motors ❏

12345

78910111213141516

12345678

6

Please send me more information on the following

Your details will be held on a database and we may send information later about special offers andother products of likely interest to you. If you do not want to benefit from this service, please tick here: ❏

DC drives and DC motors


ABB Limited9 The TowersWilmslow RoadDidsburyManchester M20 2ABUnited KingdomTel: +44 (0) 161 445 5555Fax: +44 (0) 161 445 6066www.abb.co.uk

© Copyright 2005 by ABB. All rights reserved.Specifications subject to change without notice.

D&

M C

AT20

05v1

/FE

B05

/10,

000

To find out more call:

07000 DRIVES (07000 374837)

07000 MOTORS (07000 668677)

Or visit:

www.abb.co.uk/energy

Drives&Motors cat v32 22/2/05 5:10 pm Page 32

ABB Drives

Documents

Transcript of ABB Drives