AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg....
Transcript of AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg....
![Page 1: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/1.jpg)
AAR Slid Flat Tire Test Results
C C I B S E M I N A R
C H I C A G O, I L
7 / 2 8 / 1 5
![Page 2: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/2.jpg)
Initial Assumption and Test Methodology Assumption: A flat spot (slid flat) does not significantly affect the durability of intermodal tires
Tested tires oBias and Radial tires oNew and Retread tires
Test Methodology oShearography – Verify good test samples on retread tires oSlid Flat Generation – CSX NWOH Terminal oFMVSS 119 – DOT endurance testing oCleat Testing – tires run to complete failure oDetermination of durability indices oDetermination of road pressure data (wear information) oDetermination of rolling resistance
![Page 3: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/3.jpg)
Testing Methodology Shearography – imaging of tire section pre and post testing to identify and eliminate internal anomalies from test samples
![Page 4: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/4.jpg)
Shearography (e.g. Bias-Retread)
Before Slid Flat
After Slid Flat
After 47 hours
![Page 5: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/5.jpg)
Slid Flat Generation (CSX Terminal, NWOH)
![Page 6: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/6.jpg)
Testing Methodology
• FMVSS 119
• Tire durability / endurance testing
• Multi-step process to simulate speed and load
• Step 1 – 85% max load for 7 hours
• Step 2 – 90% of max load for 16 hours
• Step 3 – 100% of max load for 24 hours
• Followed by “Cleat Test” – tires run to complete failure
![Page 7: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/7.jpg)
Slid Flat Tire Samples
Tire Group
Avg. Tread Depth
(32nds)
Avg. Slid Flat
Depth (32nds)
Avg. Tread
Depth at Flat Spot (32nds)
Avg. Slid Flat %
Bia New 13 9 4 71Radial New 14 10 4 69Bias Retread 10 6 4 62Radia Retread 11 7 4 62
No Statistically Significant Effect of Slid Flat on Durability of any Tire Group
Bias retreads have 17% less durability bias new. Radial retreads have 13% less durability than radial new. Bias tires have about 40% less durability than radial tires
![Page 8: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/8.jpg)
Slid Flat Pressure Footprint Tire footprint pressure – indication of tire wear
![Page 9: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/9.jpg)
Effect of Slid Flat on Rolling Resistance
![Page 10: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/10.jpg)
Conclusions
Slid flat condition showed no statistically significant effect on tire durability.
Footprint pressure indicates flat spots can wear less quickly than the rest of the tire and can even out over time.
Rolling resistance change due to a slid flat has a very small impact on overall rolling resistance and an insignificant impact on fuel mileage.
Radial tires are more durable and have a lower rolling resistance than bias ply tires.
New tires are more durable than retread tires.
![Page 11: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/11.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria
Old Rule:
Tire replaced when flat spot removes a minimum of 4/32”of tread
New Rule:
Tires replaced when the flat spot tread depth is 2/32” or less (Aligns with DOT replacement criteria)
Damage – flat spot tread depth is 2/32” or less and remaining tread is 5/32” or more
Damage - Tires rotated 90 – 180 degrees where tires on the same dual (i.e. RIF, ROF) have adjacent flats spots which removed a minimum of 6/32” of tread and do not meet replacement criteria
Owners – flat spot tread depth is 2/32” or less and remaining tread is less than 5/32”
Rule Change Summary Review:
![Page 12: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/12.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria
Example – Tires Not Requiring Replacement
![Page 13: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/13.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria Example – Tire Not Requiring Replacement
![Page 14: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/14.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria Example – Tires Requiring Replacement – Owner’s Responsibility (Slick Tread)
![Page 15: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/15.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria Example – Tire Requiring Replacement - Damage
![Page 16: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/16.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria Example – Tire Requiring Replacement - Damage
![Page 17: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/17.jpg)
AAR – Section F – Rule 82g – Slid Flat Criteria Example – Tire Requiring Rotation - Damage
![Page 18: AAR Slid Flat Tire Test Results...Slid Flat Tire Samples Tire Group Avg. Tread Depth (32nds) Avg. Slid Flat Depth (32nds) Avg. Tread Depth at Flat Spot (32nds) Avg. Slid Flat % Bia](https://reader030.fdocuments.in/reader030/viewer/2022040414/5f19f33c4f2f8e356507f7d6/html5/thumbnails/18.jpg)
AAR Slid Flat Testing & Analysis Benefits: • DOT alignment relative to slid flat tire replacement
• Ability to rotate dual tires with matching slid flats
• Fair assignment of responsibility (owner vs handling carrier)
• Less tire replacements – removing supply chain costs • Ability to redirect mechanical resources to improve asset availability
• Smaller environmental impact relative to less tire disposal