� � �� � � � � � � � � �

� � � � �

� �

”an Affordable One-Pass Moulder”

www.logosolcanada.com Made in Sweden

Big top windows. Easy toview cutting heads inaction.

Max. 10’x4"( 260x100 mm)with all four cuttersoperational

Independent start ofthe 5 motors

Easy setup withclear scales

7000 rpm produces anexcellent surface

Precision ConstructionInsures QualityProduction

One difference between thePH 260 and other 4-sidedplaners is that the top andbottom cutting head axleshave bearings on both ends .This provides high stabilitythat is not found inmachines costing twice asmuch.

��������� ���������������������

Logosol, a world leader inwood processing equipment,makes “one pass” productionpossible with the PH 260Planer/ Moulder. Thisunique moulder planes andmoulds four sides in onepass, and does it at a fractionof the cost of other planerswith 4-sided planing capac-ity. This simple, precise, andrugged design provides bigmoulding features at asmaller planer price.

PH 260 4-Head Planer/Moulder The First European Small Footprint - HighCapacity

This planer/moulder takes uponly 43” X 35”, yet itproduces mouldings at acapacity found only in muchhigher priced industrialmoulding machines. Thisplaner is easily moved on apallet or wheels to where youneed it in your shop, ormount it permanently in aminimum amount of spacefor continous high capacityproduction.

Nylon Inlay in the table with lowfriction guarantees feedingeven with green lumber

30 mm spindle axles, bigassortment of moulding knives.Setup time only 10-20 minutes

Adjustablefeeding 8-48 ft/min

Rust proofed for outdoor use,minimum maintenance

The machine above is equipped within- and out feeding table

� � � � -� � �

Quality, 4-Head Planer/MoulderExcellent Production

You can’t see any differenceon a moulding produced witha PH260 than one cut withan industrial machine costing$100,000.

Mouldings

The Logosol PH 260 canhandle everything from 2"loghome timbers to pictureframe mouldings. You canchoose from a big variety ofstandard moulding knives, oryou can custom design yourown moulding knives. Boththe standard and the specialmoulding knives have veryreasonable prices.

Big depthThe cutters can handle alarge moulding depth. Thatgives the PH 260 thecapacity to cut deep andbeautiful mouldings. The PH260 has also a fantasticcapacity to dimensionlumber, the upper cutter cancut 5/16" in one pass.

Solid Feeding Design

4 feeders provide a good gripon rough lumber and nyloninlays in the table guaranteethe secure feeding, even ifthe material has a lot of sap.The out feeder is made ofrubber to prevent marks onthe Finished molding.

Bertil Persson from Kalmarin Sweden examines amoulding made on his PH260. This unique moulder isin use throughout Swedenand other European countriesproducing quality mouldingsto the low tolerances of thisdemanding market. Bertilhas found his PH 260 to be amoney making and timesaving machine for him,allowing him to spend moretime at his favorite past time- hunting.

Quick and Easy Settings

Don’t turn away those smallspecial moulding ordersanymore! 10-20 minutes isall you need to allow forchanging to new profiles onthe PH 260 Planer/Moulder.This simple and quick setupsystem makes changingmoulding knives a snap!

PH 260 Features:

- 4-side planing andmolding.

- Large Capacity-10 1/4”X4”

- RustProof.

- 5 motors for precisecontrol.

- Small Footprint 43” X 35”

- Feeding system canhandle boards with highmoisture content.

- Planed Cast Iron Table.

- Easily reset to next profileor dimension.

- 10 thermogaurds protectthe machine.

- Large selection ofreasonably priced blades,profile blades and cutters.

- 4 dust collection adaptersone for each cutter head.

- Safety Lock on Overheaddoor.

Silvana Import Trading Inc. Phone: 514-939-3523 Website: www.logosolcanada.com4269 rue Ste. Catherine Ouest, Montreal, Quebec, Canada, H3Z 1P7 Fax: 514-939-3863 E-mail: silvana@total.net

Other Logosol products...

CrossCut 150To size your lumber intoconsistent lengths, use thisprecision cross cut saw fromLogosol. One Pass precisioncutting using specialChainsaw technology.

SH 230 –DimensionerThis planer dimensions andplanes lumber in one pass.Produce lumber to the theexact sizes you need easilywith this one-of-a-kindmachine.

Technical Specs - PH 260

Standard Cutter HeadsType: TB90, knivesDiameter: body 90 mm (3 1/2”)Height: body 40 mm (1.25/32”)Planer knives: HSSKnives: width 50 mm (2”)

FeedingEffect: 0,18 KWFeeding speed: 6.5- 40 ft/min

Electric SystemMoisture Class: IP54Total effect: 12.2 KWSupply: 3-phase, 220 V, 30 A

SizeLength and width: 1100 x 900 mm(43’x35’)Height: 970 mm (38”)Weight: 370 kg (820 lbs.)

AccessoriesRubber FeedersWheelsIn and Out Feeding TablesChip extractor

www.logosolcanada.com

4-sided planing/mouldingWidth: 0 - 260 mm (0-10”)Depth: 10 - 100 mm (5/16”-4”)

2-sided planing/mouldingPlaning: width 300 mm (12”)Depth: 10 - 230 mm (6/16”-9”)

PlaningPlaning width 410 mm (16”)Depth 230 mm (9”)

Upper Cutter HeadDiameter: 72 mmWidth: 410 mm (16”)Effect: 3 KW7000 rpmPlaner depth: max. 8 mm (5/16”)Molding depth: max. 10 mm (6/16”)

Bottom cutter headDiameter: 72 mmWidth: 300 mm (12”)Effect: 3 KW7000 rpmPlaning depth: 0-4 mm (0-3/32”)

Side SpindlesSpindle axle: diameter 30 mmCutting height: max. 100 mm (6/16”)Diameter: max. 140 mmEffect: 3 KW7000 rpmCutting depth: max. 30 mm (1 3/32”)

Logosol M7 SawmillLogosol is famous for their unique Sawmill, the SwedishMill, the most versatile sawmill in the world, that is poweredby a chainsaw. This sawmill produces amazing quality lumbereconomically, in all dimensions.

Chip ExtractorLogosol has a speciallydesigned chip collectionsystem available as anaccessory to the PH 260.The system capacity is 2500m3/hr. This 3-phase, 2.2KW, 220 Volt chip collectorweighs only 89 lbs. The chipcollector has a special intakefor accomodating the 4 dustcollection points on the PH260 Planer/Moulder. Thetubing available for thissystem is designed formoving chips efficiently.

Molding Knife Samples

Swedish Home Style Panel 4” Log Home Profile

Tongue and GrooveFlooring

Log Home Style Siding

� � � � �