Aama Verified Components List 8-1-11(2)

8/15/2019 Aama Verified Components List 8-1-11(2)

http://slidepdf.com/reader/full/aama-verified-components-list-8-1-112 1/14

AAMA CERTIFICATION PROGRAM VERIFIED COMPONENTS LIST

August 1, 2011 of 14

AUGUST 1, 2011

This list is comprised of those manufacturers of window and door components for whom Associated Laboratories, Inc. (ALI; AAMA’sindependent validator) has on file a current test report from an AAMA Accredited Laboratory or Approved Component Laboratoryindicating that the samples submitted for test are in full compliance with the applicable specification. Testing must be conducted by anAAMA-accredited independent full-service laboratory or approved Component Lab. Except for Sealants, test reports are valid for 18months from the test report’s completion date, indicated on this report by brackets [ ]. Sealant test reports are good for three years. AAMAdoes not certify individual components. Company names in Bold Face Type are AAMA Category 1 members.

Part One – Components of Certified Windows and Doors: This list is presented as a service to indicate component test reports on filewith the validator for use in window and door certification. If a supplier’s product(s) is not included in Part One, the product(s) may not

be used in a window or sliding glass door labeled in the AAMA Certification Program until ALI receives a current test report from anAAMA Accredited Laboratory or Approved Component Laboratory.

Part Two – Materials and Components Used for Installation: These manufacturers have voluntarily had their products tested,validated, and listed as meeting the requirements of the AAMA specification or standard as indicated.

Part One

Components of Certified Windows and Doors

Listings in this section indicate that the Applicator has applied and tested a coating in compliance with the appropriate AAMAspecification. AAMA verifies that these application lines have on file tests indicating the ability to correctly apply coatings required inthe AAMA Certification Program. (Only those applicators indicated by an asterisk (*) have completed outdoor exposure testing.) At thistime, specific paint coatings are not included as part of the AAMA Verified Components Program. In order for an applicator to be listedin the AAMA Verified Components Program, they must be coating commercially available fenestration or building products.

AAMA 2603-02 (PIGMENTED ORGANIC COATINGS)

ALUMINUM EXTRUSIONS, INC. (MS) [11/19/10]Bon L MANUFACTURING CO. (IN) [02/09/10]BonL MANUFACTURING CO. (IN) 06/14/11]Bon L MANUFACTURING CO. (TN) [02/22/10]EXTRUDERS, INC. (TX) [01/21/11]HYDRO ALUMINUM (SC) [11/09/10]KAM KIU ALUMINUM EXTRUSION CO., LTD. [08/09/10]KEYMARK CORPORATION (FL) [11/10/10]KEYMARK CORPORATION (NY) [11/15/10]

LIAO NING ZHONG WANG GROUP (CHINA) [08/09/10]LINETEC (WI) [11/10/10]PANASIA ALUMINUM CHINA, LTD. (CHINA) [05/11/11]PROFILE EXTRUSION COMPANY (GA) [11/09/10]SAPA EXTRUSIONS, INC. (GA) [11/09/10]SAPA EXTRUSIONS, INC. (SD) [01/20/11]SIERRA ALUMINUM (CA) [05/11/11] TROJAN POWDER COATING CO. (NY) [02/19/10]ZHAOQING ASIA ALUMINUM FACTORY CO. [11/09/10]

AAMA 2604-10 (HIGH PERFORMANCE ORGANIC COATINGS)

ASTRO SHAPES INC. (OH) [08/26/10]Bon L MANUFACTURING CO. (TN) [04/23/10] DIGGER SPECIALTIES (IN) [08/26/10]EXTRUDERS, INC. (TX) [03/16/10]

EXTRUDERS, INC. (TX) [06/02/11]GRAHAM ARCHITECTURAL PRODUCTS (PA) [07/02/10]

KEYMARK CORPORATION (FL) [01/11/11]KEYMARK CORPORATION (NY) [01/20/11]LINETEC (WI) [02/23/10]PROFILE EXTRUSION COMPANY (GA) [01/12/11]

TROJAN POWDER COATING CO. (NY) [04/23/10]

AAMA 2605-05 (SUPERIOR PERFORMING ORGANIC COATINGS)

ASTRO SHAPES INC. (OH) [10/12/10]Bon L MANUFACTURING CO. (TN) [06/08/10]DIGGER SPECIALTIES (IN) [11/25/10]EXTRUDERS, INC. (TX) [11/25/10]GRAHAM ARCHITECTURAL PRODUCTS (PA) [08/05/10]KEYMARK CORPORATION (FL) [02/22/11]

KEYMARK CORPORATION (NY) [02/24/11]LINETEC (WI) [08/05/10]SAPA EXTRUSIONS, INC. (GA) [02/23/11]SIERRA ALUMINUM (CA) [02/16/10]TROJAN POWDER COATING CO. (NY) [11/25/10]

VERIFIED COMPONENT LISTAAMA CERTIFICATION PROGRAM

PAINT APPLICATORS





AAMA 611-98 (ANODIZED ARCHITECTURAL ALUMINUM)

Bon L MANUFACTURING CO. (IN) CLASS II CLEAR [06/17/11]KEYMARK CORPORATION (NY) CLASS I BRONZE [01/31/11] KEYMARK CORPORATION (NY) CLASS I CLEAR [01/31/11]

LINETEC (WI) CLASS I CLEAR [05/14/10]SIERRA ALUMINUM (CA) CLASS II CLEAR [05/11/11]WINCO WINDOW COMPANY (MO) CLASS I CLEAR [04/15/10]

AAMA 612-02 (COMBINED COATINGS OF ANODIC OXIDE AND TRANSPARENT ORGANICCOATINGS ON ARCHITECTURAL ALUMINUM)

BonL MANUFACTURING CO. (TN) [11/04/10]

AAMA 613-08 (ORGANIC COATINGS ON PLASTIC PROFILES)

SIMONTON WINDOWS (WV) [03/03/11]

AAMA 615-05 (SUPERIOR PERFORMING ORGANIC COATINGS ON PLASTIC PROFILES)

MIKRON INDUSTRIES, INC. (WA) [03/15/11]

AAMA 623-07 (ORGANIC COATINGS ON FIBER REINFORCED THERMOSET PROFILES)

OMNIGLASS LTD. (MB) [07/20/10]

WEATHERSTRIPPING

AAMA 701-04 CLASS A (EXTRA HIGH PERFORMANCE PILE WEATHERSTRIPPING)

AMESBURY GROUP, INC. (NC)G2 Fin 45 Series [07/23/10]G2 Fin 45 Springback Series [07/23/10]G2 Multi-Fin 45 Series [07/23/10]G2 Multi-Fin 60 Series [07/23/10]G2 Multi-Fin 60 Springback Series [07/23/10]G2 Pile 30 Series [07/23/10]G2 Pile 45 Series [07/23/10]Woven Fin 30 Series [07/23/10]Woven Fin 45 Series [07/23/10]Woven Fin 45 Springback Series [07/23/10]Woven Pile 30 Series [07/23/10]Woven Pile 45 Series [07/23/10]Woven Pile 75 Series [07/23/10]

HOPE GLOBAL62000 [12/10/10]62009 [12/10/10]64000 [12/10/10]64009 [12/10/10]68000 [12/10/10]

NORTHERN ARCHITECTURAL PRODUCTS INC.Hydro-Pro Fin [12/15/10]Hydro-Pro Triple Fin [12/15/10]Weather-Pro Fin [12/15/10]Weather-Pro Pile [12/15/10]Weather-Pro Quiet Fin [12/15/10]Weather-Pro Triple Fin [12/15/10]

STERN & COMPANYOrbicular Series 60 Silencer [04/21/10]Orbicular Series 60 Standard Pile [04/21/10]Orbicular Series 60 Weatherbeater [04/21/10]

ULTRAFAB, INC.

Soft Touch High Density [01/06/10]Soft Touch Medium Density [01/06/10]Soft Touch Gold Medium Density [01/06/10]Tri Fin High Density [01/06/10]Ultra Fin Light Density [01/06/10]Ultrapile High Density [[01/06/10]Ultrapile Light Density [01/06/10]Ultrapile Medium Density [01/06/10]Ultrapile Gold Medium Density [01/06/10]

AAMA 702-04 CLASS A (EXTRA HIGH PERFORMANCE REPLACEABLE FENESTRATIONWEATHERSEALS)

AMESBURY GROUP – EXTRUDED DIVISION (MA)CladFT Series, D-Shape [07/21/10]Clad FT Series, Round [07/21/10]Foam-Tite12001 (C-Shaped Foam) [12/13/10]Foam-Tite12079 (Leaf Shape Foam) [12/13/10]Foam-Tite12142 (Hollow Round Foam)[12/13/10]Foam-Tite12155 (Rectangular Foam) [12/13/10]Foam-Tite 12258 (Rectangular Foam) [12/13/10]Foam-Tite 12289 PE Clad Seal [03/16/11]Foam-Tite 12289 PP Clad Seal [03/16/11]Foam-Tite 12410 (D-Shape Foam) [12/13/10]Foam-Tite 32002 (Bulb Shape Foam) [12/13/10]Foam-Tite 32007 (Round Foam) [12/13/10]Foam-Tite 32324 (Hollow Bulb Shaped Foam) [12/13/10]Foam-Tite 32404 (Hollow Round Foam) [12/13/10]Foam-Tite 32690 (Round Foam) [12/13/10]Foam-Tite 32804 PP Clad Seal [03/16/11]Foam-Tite 32823 PE Clad Seal [03/16/11]

Foam-Tite 32823 PP Clad Seal [03/16/11]

INTEK PLASTICS INC.30113A [03/24/11]30172A [03/24/11]30305A [03/24/11]50135A [03/24/11]50137A [03/24/11]50162A [03/24/11]50166A [03/24/11]50170A [03/24/11]50172A [03/24/11]50178A [03/24/11]50550A [03/24/11]50585A [03/24/11]

LAUREN MANUFACTURINGiDea Seal EPDM 60 [01/03/11]





iDea Seal EPDM 70 Duro [01/03/11]iDea Seal Sponge 2A2 [01/03/11]

PROFINESeries 9040 [07/21/10]Series 9889 [07/21/10]Series 100200 [07/21/10]Series 500100 [07/21/10]Series 500102 [07/21/10]Series 500500 [07/21/10]Series 500602 [07/21/10]Series 500900 [07/21/10]

SCHLEGEL SYSTEMS, INC.Aptus Weatherseal Series [07/11/11]Aptus Magnetic Weatherseal Series [07/11/11]Polyflex Weatherseal Series [07/11/11]

Q-Lon/QEZ T-Slot Series [07/11/11]Q-Lon Door Seal Series [07/11/11]Q-Lon Magnetic Seal Series [07/11/11]QEZD Window Seal Series [07/11/11]QWS Kerf Seal Series [07/11/11]QWS Pocket Seal Series [07/11/11]QWS Surface Mount Series [07/11/11]

ULTRAFAB, INC.10 Series Bulb Seal [01/06/10]14 Series Bulb Seal [01/06/10]

18 Series Bulb Seal [01/06/10]Pro-Lon Magnetic [08/18/10]Pro-Lon Push In [08/18/10]Pro-Lon T-Slot [08/18/10]

SEALANTS

AAMA 802.3-10, TYPE I (DUCTILE BACK-BEDDING COMPOUND)

DOW CORNING791 [06/29/10]899 [03/23/10]983 [02/28/10]995 [07/28/10]1199 [07/30/10]Contractors Weatherproofing [10/21/10]

H. B. FULLER COMPANYHL-5200 [09/07/10]

HENKEL CORPORATION (OH)OSI® EP- 1000™ [09/14/10] OSI® TeQ::Seal™ [06/15/11]Purfect Glaze RT 1000 [09/14/10]

MAY NATIONAL ASSOCIATES, INC.Bondaflex 295 [04/13/10]BondaflexSilfast 501 [04/05/10]

MOMENTIVE PERFORMANCE MATERIALS

RTV 5818 [01/19/11]

SCS 1200 [01/19/11]SCS 1800 [01/19/11]SCS 2800 [01/19/11]

PECORA CORPORATIONSeries 895 [03/24/10]Series 896 [03/24/10]

SCHNEE-MOREHEAD, INC.Series 5522 Acryl-R [08/24/10]Series 8500 Acryl-R [06/14/11]

SIKA CORPORATION (NJ)SikaSil SG-10 [04/05/10]SikaSil WS-295 [04/13/10]

TREMCO, INC.ProGlaze SSG [07/15/10]TremGlaze S700 [07/15/10]TremGlaze S900 [07/15/10]

AAMA 802.3-10, TYPE II (DUCTILE BACK-BEDDING COMPOUND)

ACCUMETRIC ENGINEERED PRODUCTSBOSS 150 [01/19/11]BOSS 318 Fast Cure [10/26/10]BOSS 396 [10/26/10]

ADFAST CORPORATIONSeries Adseal 4550 [06/13/11]Series Adseal 4940 [06/13/11]

AMERICAN SEALANTS, INC.Series ASI 335 Window Seal [12/10/10]

CHEM LINK INC.Dura Link [04/04/11]M-1 [04/04/11]

Nova Link [04/04/11]

DOW CORNING791 [06/29/10]899 [03/23/10]983 [04/12/11]983 SGS [04/12/11]995 [07/28/10]1199 [07/30/10]9-1350 [05/10/10]

H. B. FULLER COMPANYHL-5200 [09/07/10]HL-5201 [08/03/10]

HENKEL CORPORATION (OH)OSI® EP- 1000™ [09/14/10] OSI® TeQ::Seal™ [06/15/11] Purfect Glaze RT 1000 [09/14/10]

MAY NATIONAL ASSOCIATES, INC.Bondaflex 295 [04/13/10]BondaflexSilfast 501 [04/05/10]

MOMENTIVE PERFORMANCE MATERIALSRGS 7700 [04/05/11]RTV 5818 [04/05/11]SCS 1200 [04/05/11]SCS 1800 [04/05/11]SCS 2800 [04/05/11]SCS 7000 [01/19/11]SSG 4000AC [01/19/11]

NOVAGARD SOLUTIONS Novaflex SBC40-M116 [02/16/10]

NUCO INC. NUFLEX 313 [06/22/10]





PECORA CORPORATIONSeries 896 TBS [03/24/10]985 [02/11/11]

SCHNEE-MOREHEAD, INC.Series 5731 Poly-Glaze Plus [10/28/10]

SIKA CORPORATION (MI)Sikaflex ® 505 UV [02/04/11]

SIKA CORPORATION (NJ)SikaSil SG-10 [04/05/10]

SikaSil WS-295 [04/13/10]

SILCO INC.Sil-Flex 7500 [04/29/11]Sil-Seal 9500 [04/29/11]Ultra Flex [04/29/11]

SMARTER SEALANTSEnRG Seal [06/10/11]

TBP CONVERTINGSeries 8800 [05/05/11]

TREMCO, INC.Dymonic FC [07/21/10]Spectrem 2 [07/21/10]TremGlaze S300 [02/08/11]TremGlaze S500 [02/08/11]TremGlaze U1000 [05/27/10]

TremGlaze U1600 [07/21/10]Tremsil 600 [05/27/10]

TRUSEAL TECHNOLOGIES Series TruSeal GS1 [12/09/10]

AAMA 803.3-10, TYPE I (NARROW JOINT SEAM SEALER)

ACCUMETRIC ENGINEERED PRODUCTSBOSS 150 [01/19/11]BOSS 396 [10/26/10] BOSS 828 [10/26/10]




HENKEL CORPORATION (OH)OSI® EP- 1000™ [01/03/11] Purfect Glaze RT 1000 [01/03/11]

NOVAGARD SOLUTIONS Novaflex M100 Series [02/16/10] NovaflexSiding and Trim Series [02/16/10]

NUCO INC. NUFLEX 313 [06/22/10]

SCHNEE-MOREHEAD, INC.Series 2100 CuraSil [04/06/10]Series 5555 Acryl-R [03/24/10]





AAMA 803.3-10, TYPE II (NARROW JOINT SEAM SEALER)

ACCUMETRIC ENGINEERED PRODUCTSBOSS 827 [10/26/10] SCHNEE-MOREHEAD, INC.

Series 5504 Acryl-R [02/25/10]PECORA CORPORATION

896 SSL [02/11/11]896 TBS SSL [02/11/11]1215 [02/11/11]

AAMA 804.3-10 (BACK-BEDDING MASTIC GLAZING TAPES)

ADCO PRODUCTS, INC.Series GT-1 [03/08/11]Series GT-4 [03/08/11]

C.R. LAURENCE CO., INC.Series Butyl Architectural Tape Gray [03/08/11]Series Butyl Architectural Tape Black [03/08/11]

SCHNEE-MOREHEAD, INC.Series 5700 Poly-Glaze Black [06/30/11]

TREMCO, INC. (ONT)ET440 [05/27/10]Polyshim II [05/27/10]TremGlaze GT400 [05/27/10]TremGlaze GT800 [05/27/10]

AAMA 805.2-10, GROUP A (BONDING BACK-BEDDING COMPOUND)

DOW CORNING799 [06/03/10]899 [10/27/10]InstantGlaze I [02/22/11]InstantGlaze II [10/22/10]InstantGlaze III [04/08/11]

H. B. FULLER COMPANYHL-5201 [08/30/10]

HENKEL CORPORATIONPurfect Glaze H 91-020A [07/21/10]Purfect Glaze H 91-351A [07/21/10]Purfect Glaze H 91-357A [07/21/10]Purfect Glaze S [04/26/11]

TREMCO, INC.TremGlaze S500 [05/27/10]





AAMA 805.2-10, GROUP C (BONDING BACK-BEDDING COMPOUND)

ACCUMETRIC ENGINEERED PRODUCTSBOSS 150 [01/19/11]BOSS 396 [10/26/10]

ADFAST CORPORATIONSeries Adseal 4550 [06/13/11]Series Adseal 4940 [06/13/11]




DOW CORNING791 [06/29/10]794F [02/16/11]899 [03/23/10]995 [07/28/10]1199 [07/30/10]9-1350 [05/10/10]Contractors Weatherproofing [10/21/10]

H. B. FULLER COMPANY

HL-5200 [09/07/10]HENKEL CORPORATION (OH)

OSI® EP- 1000™ [09/14/10] OSI® TeQ::Seal™ [06/15/11] Purfect Glaze RT 1000 [09/14/10]Purfect Glaze V [04/26/11]

MAY NATIONAL ASSOCIATES, INC.Bondaflex 201FC [04/07/10]Bondaflex 295 [04/13/10 ]

MOMENTIVE PERFORMANCE MATERIALSRGS 7700 [04/05/11]RTV 5818 [01/19/11]SCS 1200 [01/19/11]SCS 1800 [01/19/11]

SCS 2800 [01/19/11]SCS 7000 [01/19/11]

SSG 4000AC [01/19/11]

NOVAGARD SOLUTIONS Novaflex M100 [02/16/10] Novaflex M150 [06/14/10] Novaflex SBC30-M150 [04/06/11] Novaflex SBC40-M116 [02/16/10]

PECORA CORPORATIONSeries 895 [03/24/10]Series 896 [03/24/10]Series 896 TBS [03/24/10]985 [02/11/11]

SCHNEE-MOREHEAD, INC.Series 2100 CuraSil [04/06/10]Series 2700 Rapid Glaze [09/23/10]Series 5555 Acryl-R [03/24/10]Series 5731 Poly-Glaze Plus [10/28/10]Series 8500 Acryl-R [06/14/11]

SELENA USA, INC.Series Tytan Pro MR88 [10/14/10]Series WD20 Neutral Cure Oxime [04/07/10]

SIKA CORPORATION (MI)

Sikaflex®

552 [02/04/11]SIKA CORPORATION (NJ)

SikaSil SG-10 [04/07/10]SikaSil WS-295 [04/13/10]



TREMCO, INC.TremGlaze S400 [03/29/11]



ADCO PRODUCTS, INC.Series GT-6 [03/08/11]

C.R. LAURENCE CO., INC.Series 100+ Load Bearing [03/08/11]



ADCO PRODUCTS, INC.Series GT-1 [03/08/11]Series GT-4 [03/08/11]

C.R. LAURENCE CO., INC.Series Butyl Architectural Tape Gray [03/08/11]Series Butyl Architectural Tape Black [03/08/11]


TREMCO, INC. (ONT)ET440 [05/27/10]Polyshim II [05/27/10]TremGlaze GT800 [05/27/10]TremGlaze GT400 [05/27/10]

AAMA 810.1-10, TYPE I (EXPANDED CELLULAR GLAZING TAPES)

ADCHEM CORPORATIONSeries GT w/ Acrylic PSA, 4-6# PE foam [11/02/10]Series HF w/ Dual PSA, 3-5# PE foam [11/02/10]

ADHESIVE APPLICATIONSSeries 2000 BZ w/ Rubber PSA, 2.5# & 3# PE foam [06/15/11] Series 5000 B w/ Rubber PSA, 2.5# & 3# PE foam [06/15/11]

Series 6000 BZ w/ Acrylic PSA, 2.5#, 3# & 5# PE foam[06/15/11]Series 7000 BZ w/ Acrylic PSA, 2.5#, 3# & 5# PE foam [06/15/11]Series 8000 B w/ Dual PSA, 2.5#, 3# & 5# PE foam [06/15/11]Series 9000 BZ w/ Dual PSA, 3# PE foam [06/15/11]





ADHESIVES RESEARCH, INC.ARClad 2000/8000 [06/09/10]ARClad3000 [05/13/10]ARClad 4000 [05/13/10]ARClad 5000 [01/27/11]

FLEXCON INDUSTRIAL LLCSeries AWT-3 w/ Acrylic PSA, 3# PE foam [02/25/11]Series AWT-3 w/ Acrylic PSA, 5# PE foam [02/25/11]Series DGT w/ Acrylic PSA, 3# PE foam [02/25/11]Series DGT w/ Acrylic PSA, 5# PE foam [02/25/11]Series HiPerGlaze F1 w/ Acrylic PSA, 6# PE/EVA foam

[02/25/11]Series HiPerGlaze F1 w/ Acrylic PSA, 12# PE/EVA foam[02/25/11]Series HiPerGlaze V1 w/ Rubber/Acrylic Dual PSA, 4#PE/EVA foam [02/25/11]

CAPITAL TAPE CO., INC.5100 Closed Cell [07/18/11]5200 Closed Cell [07/18/11]

ECHO TAPESeries GL-N0608 w/ Acrylic PSA, 2.5# PE foam [01/25/10]Series GL-N0616 w/ Acrylic PSA, 4# PE foam [01/25/10]Series GL-NO708 w/ Acrylic PSA, 2# PE foam [02/01/10]Series GL-NO716 w/ Acrylic PSA, 4-4.5# PE foam [02/01/10]

GASKA TAPE, INC.Series EG400 w/ Acrylic PSA, 4# PE foam [07/15/11]Series EG600 w/ Acrylic PSA, 6# PE foam [07/15/11]Series V1500 w/ Acrylic PSA, 15# PVC foam [07/15/11]

PRES-ON TAPE AND GASKETSeries PL 4400 w/ Rubber PSA, 4# PE foam [06/22/11]Series PL 4500 w/ Acrylic PSA, 4# PE foam [06/22/11]Series PL 4700 w/ Dual PSA, 4# PE foam [06/22/11]

SAINT GOBAIN PERFORMANCE PLASTICS CORP.Series V980/V990 [08/03/10]Series V980/V990 Gorrell [08/03/10]

SCHNEE-MOREHEAD, INC.Series 2560 [06/15/11]Series 2565 [06/15/11]

TBP CONVERTINGSeries TBP 751 Black and White w/ Acrylic PSA, 4# PEfoam [07/18/11]Series TBP 754 Black and White w/ Acrylic PSA, 2.5# PE

foam [07/18/11]

TESA TAPE, INC.Series 628 w/ Acrylic PSA, 4# PE foam [08/23/10]Series 628 w/ Acrylic PSA, 9# PE foam [08/23/10]Series 629 w/ Modified Acrylic PSA, 4# PE foam [08/23/10]Series 629 w/ Modified Acrylic PSA, 9# PE foam [08/23/10]Series 649 w/ Rubber PSA, 4# PE foam [08/23/10]

V. HIMARK (USA) INC.Series G480B/W (G483W/G483B/G484W/G484B) w/Acrylic PSA, 2.5# PE foam [07/18/11]Series G480B/W (G488W/G488B/G485W/G485B) w/Acrylic PSA, 4# PE foam [07/18/11]Series R480B/W (R488W/R488B/R485W/R485B) w/Rubber PSA, 4# PE foam [07/18/11]

VENTURE TAPE CORPORATIONSeries VG100 w/ Differential PSA, 4-5# PE Foam [02/04/10]Series VG300 w/ Differential PSA, 4-5# PE foam [02/04/10]Series VG300 w/ Differential PSA 8801A/5261A, 4-5# PE foam[02/28/11]Series VG300 w/ Dual PSA, 4-5# PE foam [11/05/09]Series VG700 w/ Dual PSA, 2.5# & 5# PE foam [06/15/11]Series VG1100 w/ DifferentialPSA, 4-5# PE foam [02/04/10]Series VG1200 w/ Acrylic PSA, 2.5# & 5# PE foam [06/15/11]

HARDWARE

AAMA 901-10 (ROTARY & LINEAR OPERATORS)

ACU PLASMOLD, INC.Elite-02 Split Arm Casement Operator C-R15/C-LC25 [07/12/11]

ASHLAND HARDWARE SYSTEMS1489 Series Dual Arm Operator C-C30/C-HC40 [04/22/10]W-1276 Dyad Rotary Operator C-AW40 [03/05/10]W-1275 Dyad Rotary Operator C-R15/C-LC25 [03/05/10]W-1276 Egress Rotary Operator C-C30/C-HC40 [03/12/10]W-1489 Awning Operator C-AW40 [12/20/10]W-1489 Optima Dyad Operator C-AW40 [03/20/10]W-1491 Dual Arm Operator C-C30/C-HC40 [11/25/10]W-1491 Optima Awning Operator AP-R15/AP-LC25/AP-C30 [03/17/11]W-1491 Optima Dyad SS Operator C-C30/C-HC40 [04/11/11]

BRONZE CRAFT CORP. (THE)255 Series Single Arm Operator C-AW40 [04/05/10]

FASCO DIE CAST, INC.Grand Split Arm Operator C-R15/C-LC25/R-PG15-C [08/08/10]

MENNIE CANADA LIMITEDMCLD007 Single Arm Operator C-R15/C-LC25 [07/05/10]MCLD009 Single Arm Operator C-R15/C-LC25 [07/05/10]MCLD013 Single Arm Operator C-R15/C-LC25 [07/05/10]MCLD025/026 Dyad Operator C-R15/C-LC25 [07/05/10]

NORTHERN ARCHITECTURAL PRODUCTS INC.Decore Center Pull Awning Operator 8” AP -R15/AP-LC25/AP-C30 [06/14/10]Decore Center Pull Awning Operator 12” AP -R15/AP-LC25/AP-C30 [06/14/10]Decore Dual Arm Operator 16” C -C30/C-HC40 [08/24/10]Decore Dual Arm Operator 19” C -C30/C-HC40 [08/24/10]





Decore Dyad Operator 8” C -C30/C-HC40 [03/18/10]Decore Dyad Operator 8.5” C -C30/C-HC40 [03/18/10]Decore Dyad Operator Low Profile 8” C -C30/C-HC40 [03/18/10]Decore Dyad Operator Low Profile 8.5” C -C30/C-HC40 [03/18/10]Decore Dyad Operator Reverse 8” C -C30/C-HC40 [03/18/10]Decore Dyad Operator Reverse 8.5” C -C30/C-HC40 [03/18/10]Decore Dyad Operato r Reverse Low Profile 8” C -C30/C-HC40 [03/18/10]Decore Dyad Operator Reverse Low Profile 8.5” C -C30/C-HC40 [03/18/10]Grande Center Pull Awning Operator 8” AP -R15/AP-LC25/AP-C30 [07/16/10]Grande Dual Arm Operator 16” C -C30/C-HC40 [05/14/10]Grande Du al Arm Operator Low Profile 16” C -C30/C-HC40 [05/14/10]Grande Dual Arm Operator 19” C -C30/C-HC40 [05/14/10]

Grande Dual Arm OperatorLow Profile 19” C -C30/C-HC40 [05/14/10]Grande Single Arm Operator 7.5” C -C30/C-HC40 [07/22/10]Grande Single Arm Opera tor 9.5” C -C30/C-HC40 [07/22/10]

ROTO FRANK OF AMERICA, INC.X-Drive Carbon Steel Dual Arm Rotary Operator C-AW40 [01/24/11]X-Drive Carbon Steel Dual Arm Rotary Awning Operator AP-R15/AP-LC25/AP-C30 [01/10/11]X-Drive Carbon Steel Split Arm and Single Arm Rotary Operator C-C30/C-HC40 [01/10/11]X-Drive Stainless Steel Dual Arm Rotary Operator C-AW40 [01/20/11]X-Drive Stainless Steel Dual Arm Rotary Awning Operator AP-R15/AP-LC25/AP-C30 [01/12/11]X-Drive Stainless Steel Split Arm and Single Arm Rotary Operator C-C30/C-HC40 [01/12/11]

TRUTH HARDWARE CORPORATION (MN)Series 15 Ellipse Dyad Operator C-R15 [04/25/10]Series 15 Ellipse Single Arm Operator C-R15 [06/17/10]Series 15 EntryGard Dual Arm Operator C-R15 [11/12/10]Series 15 EntryGard Dyad Operator C-R15 [10/25/10]Series 15 EntryGard Single Arm Operator C-R15 [02/04/10]Series 15 Sealable Dyad Operator C-R15 [05/13/10]Series 15 Sealable Single Arm Operator C-R15 [11/04/10]Series 50 Maxim Awning Operator SST AP-R15/AP-LC25/AP-C30 [05/05/11]Series 50 Maxim Dual Arm Operator C-C30/C-HC40 [04/28/11]Series 50 Maxim Dual Arm Operator SST C-HC40 [04/16/10]Series 50 Maxim Dyad Operator C-HC40 [05/05/10]Series 50 Maxim Dyad Operator SST C-C30/C-HC40 [05/06/11]Series 50 Maxim Single Arm Operator C-HC40 [10/11/10]Series 50 Maxim Single Arm Operator SST C-C30/C-HC40 [01/03/11]Series Encore Awning Operator AP-R15/AP-LC25/AP-C30 [01/13/11]Series Encore Awning Operator SST AP-R15/AP-LC25/AP-C30 [04/11/11]Series Encore Dual Arm Operator C-C30/C-HC40 [05/03/10]Series Encore Dual Arm Operator SST C-C30/C-HC40 [04/15/11]Series Encore Dyad Operator C-C30/C-HC40 [01/19/11]Series Encore Dyad Operator SST C-C30/C-HC40 [01/03/11]

Series Encore Single Arm Operator C-C30/C-HC40 [06/21/11]Series Encore Single Arm Operator SST C-HC40 [04/16/10]Series Weathershield Dyad Operator C-R15 [10/21/10]Series Weathershield Single Arm Operator C-R15 [10/11/10]

AAMA 902-07 (SASH BALANCES)

ACU PLASMOLD, INC.Series CBE-3 [08/29/10]

ASHLAND PRODUCTSSeries A [04/26/11]Series C [04/27/11]Series J [11/09/10]Series M [08/11/10]Series S [11/11/10]Series V [08/13/10]

BSI HARDWARE / AMESBURY GROUPSeries 100 [12/02/10]Series 130 [12/07/10]Series 161 [12/09/10]Series 401 [12/20/10]Series 506 [11/11/10]Series 651 [12/13/10]Series 716 [11/12/10]Series 758 [12/31/10]Series 841 [11/16/10]Series Centurion 985 [01/06/11]Series Egress 983 [12/15/10]Series Pneulift422 [01/10/11]Series SuperBoost F 210 [01/06/11]

Series SuperBoost K 220 [01/06/11]Series Universal 984 [12/30/10]

CALDWELL MANUFACTURING CO.Series 77t Block & Tackle [03/14/11] Series 86 Block & Tackle [05/20/11]Series 97t Block & Tackle [05/16/11]Series Aluma-Tilt/Spirex [03/14/11]Series APEX Block & Tackle [03/21/11]Series Block & Tackle/Prodigy [03/29/11]Series Constant Force: ½” Quick -Tilt [03/04/11]Series Constant Force: ½” Roller -Tilt [03/04/11]Series Con stant Force: ¾” Roller -Tilt [03/04/11]Series Enhanced Insul-Tilt/Spiromite [03/10/11]Series EZ Lift 7”-17” [03/09/11] Series EZ Lift 18” -60” [03/09/11]Series Insul-Tilt/Spiromite [09/30/10]Series Ultra-Lift [05/24/11]Series Ultra-Lift 6 [06/28/10]Series Ultra-Lift nt [03/16/11]

JOHN EVANS’ SONS, INC. Series Half Inch [03/01/11]SeriesHalf Inch Heavy Duty [03/01/11]





Series SideLoad[03/01/11]Series Three Quarter Inch [03/01/11]

KERN-LIEBERS USA, INC.½” 9# [02/16/11] PCO 3# [09/15/10]PCO 5# [09/17/10]PCO 7# [09/22/10]

UNIQUE BALANCE SYSTEMS INTERNATIONALBlock and Tackle Tilt [02/10/11]LiteLift [02/10/11]

Spiral 38 [02/10/11]Spiral Super Heavy Duty 38 [02/10/11]

Spiral 58 [02/10/11]SuperLift [02/10/11]

VISION INDUSTRIES GROUP, INC.Series 50 [04/22/11]Series 55/60 Tilt & Inverted [06/13/11]

WAI LUNG INDUSTRIAL CO., LTDWL10JL 250/BX [01/22/11]WL10JS 250/BX [10/28/10]WL334S 250/BX [10/28/10]WL407L 250/BX [10/28/10]

WL407S 250/BX [10/28/10]

AAMA 904-09 (MULTI-BAR HINGES)

ACU PLASMOLD, INC.13” Stainless Steel C -R-81 LBS.- 28” Wide -LR-NLBR [03/15/10]

ADVANTAGE MANUFACTURING CORP.2000/3000 16” Magnum Projection P -C-145 Lbs.- 40” High -LR [02/09/11]2000/3000 24” Magnum Projection P -C-200 Lbs.- 60” High -LR [02/19/11]2000/3000 28” Magnum SG Projection P -C-320 Lbs.- 87” High -LR [03/16/11]4000/4100 12” Magnum Casement C -C-135 Lbs.- 33” Wide -LR-NLBR [02/28/11]5000 12” Magnum Egress Casement C -C-180 Lbs.- 36” Wide -LR-NLBR [03/07/11]

NORTHERN ARCHITECTURAL PRODUCTS INC.

431 10” Steel C -R-80 Lbs.- 35” Wide -NLR-MOR [02/12/10]431 10” Stainless Steel C -R-80 Lbs.- 35” Wide -NLR-MOR [02/08/10]432 13” Steel C -R-120 Lbs.- 35” Wide -NLR-MOR [02/03/10]4302 SS 24” C -C-158 Lbs.- 24” High -NLR-NLBR [01/07/11]4302 SS 24” P -C-158 Lbs.- 24” Wide -NLR-NLBR [12/17/10]

ROTO FRANK OF AMERICA, INC.HG05 10” Washability Steel C -C-108 Lbs.- 36” Wide -LR-NLBR [11/29/10]HG05 10” Washability Stainless Steel C -C-108 Lbs.- 36” Wide -LR-NLBR [11/29/10]HG05 13” Washability Steel C -C-125 Lbs.- 42” Wide-LR-NLBR [11/29/10]HG05 13” Washability Stainless Steel C -C-125 Lbs.- 42” Wide -LR-NLBR [11/29/10]

SECURISTYLE LIMITEDStorm B 10 P-C-121 Lbs.- 43” High -LR-NLBR [04/08/10]Storm B 12 P-C-121 Lbs.- 43” High -LR-NLBR [04/08/10]Storm B 16 P-C-121 Lbs.- 43” High -LR-NLBR [04/08/10]Storm B 22 P-C-165 Lbs.- 59” High -LR-NLBR [04/08/10]

Storm B 26 P-C-265 Lbs.- 87” High -LR-NLBR [04/08/10]Storm BS 10 C-C-103 Lbs.- 33” Wide -LR-NLBR [04/08/10]Storm BS 16 C-C-103 Lbs.- 33” Wide -LR-NLBR [04/08/10]Storm E 16 C-C-103 Lbs.- 33” Wide -LR-NLBR [04/08/10]

TRUTH HARDWARE CORPORATION (MN)14” SD 201 SS C -C-65 Lbs.- 32” Wide -LR-NLBR [04/05/11]14” SD 201 ST C -C-65 Lbs.- 32” Wide -LR-NLBR [04/01/11]16” HD 301 ST C -C-120 Lbs.- 36” Wide -LR-NLBR [02/25/11]16” HD 333 SS C-C-175 Lbs.- 36” Wide -LR-NLBR [04/11/11]16” HD 334 SS C -C-175 Lbs.- 32” Wide -LR-NLBR [04/19/11]16” SD 222 SS C -C-82 Lbs.- 32” Wide -LR-NLBR [03/24/11]16” SD 224 SS C -C-82 Lbs.- 34” Wide -LR-NLBR [05/11/11]18” HD 601 SS C -C-120 Lbs.- 36” Wide -LR-NLBR [04/26/11]18” SD 401 SS C -C-65 Lbs.- 32” Wide -LR-NLBR [03/01/11]20” SD 201 ST P -C-40 Lbs.- 34” High -LR [03/07/11]20” SD 201 SS P -C-40 Lbs.- 34” High -LR [03/11/11]24” HD 301 SS C -C-120 Lbs.- 36” Wide -LR-NLBR [03/04/11]24” HD 301 ST P -C-195 Lbs.- 60” High -LR [05/05/11]28” HD 301 SS P -C-280 Lbs.- 80” High -LR [03/04/11]28” HD Superior SS P -C-315 Lbs.- 87” High -LR [03/01/11]

YKK AP AMERICA12” (4K -14207) C-C-83 Lbs.- 26” Wide -LR-NLBR [11/17/10]16” (4K -14208) C-C-117 Lbs.- 36” Wide -LR-NLBR [11/12/10]12” (4K-14207) P-C-97 Lbs- 30” High -LR-NLBR [11/03/10]16” (4K -14208) P-C-145 Lbs- 44” High -LR-NLBR [10/28/10]16” (5K -14479) P-C-145 Llbs- 44” High -LR-NLBR [01/19/11]22” (4K -14209) P-C-166 Lbs- 52” High -LR-NLBR [11/08/10]





AAMA 906-07 (SLIDING GLASS DOOR ROLLER ASSEMBLIES)

DOOR HARDWARE/AMESBURY GROUPAD-15-BS-112 Steel 75 Lbs. [02/15/10]AD-19-BS-112 Steel 75 Lbs. [02/16/10]AD-19-TBN-125 Steel 75 lbs. [02/26/10]AD-92-PRS-150 SS 150 Lbs. [04/06/11]AD-92-PRS-150 Steel 150 Lbs. [04/01/11]TA-25-PRN-300 SS 400 Lbs. [02/25/10]TA-32-PRS-150 SS 300 Lbs. [03/09/10]TA-35-BS-100 Steel 100 Lbs. [11/29/10]TA-35-BS-112 Steel 150 Lbs. [04/25/11]TA-35-BS-125 Steel 200 Lbs. [02/22/10]TA-39-BS-181 Steel 250 Lbs. [03/04/10]TA-39-BSS-150 SS 250 Lbs. [03/16/10]TA-51-BS-112 Steel 150 Lbs. [08/24/10]TA-51-BS-125 Steel 200 Lbs. [04/29/11]TA-51-BS-150 Steel 200 Lbs. [07/14/10]TA-51-BSS-150 SS 250 Lbs. [09/20/10]TA-64-BSS-150 SS 250 Lbs. [03/01/10]TA-73-BS-125 Steel 200 Lbs. [04/12/11]TA-76-BS-125 Steel 200 Lbs. [04/27/11]TA-76-BS-143 Steel 200 Lbs. [08/04/10]TA-76-BSS-125 SS 200 Lbs. [09/08/10]TA-76-BSS-143 SS 250 Lbs. [07/01/10]TA-76-BSS-150 SS 250 Lbs. [11/09/10]TA-76-PRS-125 SS 300 Lbs. [03/23/11]TA-78-BS-125 SS 200 Lbs. [02/03/11]

TA-81-PRN-212 SS 250 Lbs. [04/13/11] TA-81-PRS-212 SS 300 Lbs. [04/18/11]TA-83-PRS-212W SS 300 Lbs. [04/15/11]TA-84-BS-125 Steel 200 Lbs. [03/03/10]TA-84-BS-143 Steel 200 Lbs. [05/10/11]TA-84-BSS-143 SS 250. Lbs. [04/28/10]TA-84-PRS-125 SS 300 Lbs. [05/27/11]TA-84-PRS-143 SS 300 Lbs. [02/08/11]TA-84-PST-143 Steel 300 Lbs. [06/30/11]TA-86-PRS-300 SS 500 Lbs. [02/19/10]

INTERNATIONAL PRODUCT SOURCESPD403 75 Lbs. [07/20/10]PD423YD 75 Lbs. [07/26/10]PD414YD 100 Lbs. [08/05/10]

P.H. TECH, INC.#9732 Roller Assembly 75 Lbs. [12/03/10]

TRUTH HARDWARE (MN)Series 38.25 Acetal 150 Lbs. [10/11/10] Series 39.10 Steel 200 Lbs. [04/30/10]Series 39.11 Nylon 200 Lbs. [05/20/11]Series 39.13 Stainless 200 Lbs. [05/19/11]Series 39.27 Nylon Wheel Stainless 125 Lbs. [12/21/10]Series SD 659 Steel 75 Lbs. [04/19/10]Series SD 740 Steel 200 Lbs. [10/06/10]Series SD 747 Steel 75 Lbs. [12/15/10]Series TA-09 LG WDG 181 SST 350 Lbs. [06/10/11]Series TA-35B-BS-112-H-740-C-2 Steel 125 Lbs. [10/07/10]Series TA-39-BS-181-850 w/ NO SPRING Steel 200 Lbs.[12/17/10]Series TA-39-BSS-181-850 Stainless 200 Lbs. [12/14/10]Series TA-39-BSS-181-850 Prec Stainless 200 Lbs. [07/02/10]Series TA-51-BS-100 Steel 125 Lbs. [06/02/11]Series TA-51-BS-125 Steel 175 Lbs. [04/20/10]Series TA-51-BS-125-USteel 175 Lbs. [09/30/10]Series TA-51-BS-150-W/10-32 CSK Steel 175 Lbs. [12/17/10]Series TA-73-BS-125 w/ .125R STD PREC Steel 200 Lbs.[09/29/10]Series TA-73-BS-147 Steel 200 Lbs. [01/18/11]Series TA-73-BSS-147 Stainless 250 Lbs. [06/02/11]

Series TA-73-BSS-125 Stainless 250 Lbs. [04/14/10]Series TA-73C-BSS-150 Stainless 225 Lbs. [10/21/10]Series 1978 Steel 125 Lbs. [10/04/10]

VANGUARD PLASTICS LTD.Series 5900100 Lbs. [06/23/10]Series 6800 100 Lbs. [06/24/10]Series 8900-SS 300 Lbs. [06/29/10]Series 8900-YC 150 Lbs. [06/22/10]Series 9001-YC 75 Lbs. [06/28/10]Series 9004-SS150 Lbs. [06/18/10]Series 9004-YC 75 Lbs. [05/12/10]

VISION INDUSTRIES GROUP, INC.Series 600 Steel 75 Lbs. [04/07/11]

AAMA 908-02 (FRICTION BASED SASH BALANCES)

BSI HARDWARE / AMESBURY GROUPSeries 760 [11/18/10]Series 800 [11/30/10]Series 909 [11/23/10]Series 960 [11/24/10]





Part Two

Materials and Components Used for Installation

SEALANTS

AAMA 711-07 (SELF ADHERING FLASHING USED FOR INSTALLATION OF EXTERIOR WALL

FENESTRATION PRODUCTS)HENKEL (OH)

TeQ::Flash MDD [02/23/10]

AAMA 808.3-10 (EXTERIOR PERIMETER SEALING COMPOUND)

ACCUMETRIC ENGINEERED PRODUCTSBOSS 150 [01/19/11]BOSS 396 [10/26/10]

BOSTIK, INC.Chem-Calk 2000 [06/14/10]

DOW CORNINGContractors Weatherproofing [10/21/10]

HENKEL CORPORATION (OH)OSI® EP- 1000™ [01/03/11] OSI® TeQ::Seal™ [06/15/11] Purfect Glaze RT 1000 [01/03/11]

MAY NATIONAL ASSOCIATES, INC.Bondaflex 199PG [04/13/10]Bondaflex 295 [04/13/10]Bondaflex PUR 25 [04/13/10]

NOVAGARD SOLUTIONS Novaflex M100 [06/14/10] Novaflex MP [04/06/11] Novaflex SBC40-M116 [06/14/10]

SCHNEE-MOREHEAD, INC. Series 2100 CuraSil [04/06/10]Series 5731 Poly-Glaze Plus [10/28/10]Series 5732 Poly-Glaze [10/21/10]Series 7100/7108 Permathane [03/05/10]Series 8500 Acryl-R [06/14/11]


SIKA CORPORATION (MI)Sikaflex ® Construction Sealant [02/04/11]Sikaflex ® Textured [02/04/11] Sikaflex ® 1A [02/04/11]Sikaflex ® 15 LM [02/04/11]Sikaflex ® 201 US [02/04/11]Sikaflex ® 201 Textured [02/04/11]Sikaflex ® 219 LM [02/04/11] Sikaflex ® 505 UV [02/04/11]Sikaflex ® 721 UV [04/26/10]

SIKA CORPORATION (NJ)SikaSil WS-295 [04/13/10]SikaSil N Plus [04/13/10]


TREMCO, INC.Dymonic FC [09/15/10]TremGlaze S500 [02/08/11]TremGlaze U1600 [09/15/10]






VERIFIED COMPONENT LIST MANUFACTURERSACCUMETRIC ENGINEEREDPRODUCTS411 E. DIXIEELIZABETHTOWN, KY 42701PH: (270) 737-8005 FAX: (270) 765-2412CONTACT: BRIAN JOHNSTONEMAIL: [email protected]

ACU PLASMOLD, INC.270 ESNA PARK DR., UNIT 9-10MARKHAM, ON L3R 1H3CANADAPH: (626) 289-8380 FAX: (323) 315-1283CONTACT: JOHN H. QUACHEMAIL: [email protected]

ADCHEM CORPORATION1852 OLD COUNTRY ROADRIVERHEAD, NY 11901PH: (631) 727-6000 FAX: (631) 727-6010CONTACT: FRANCIS WODZINSKIEMAIL: [email protected]

ADCO PRODUCTS, INC.4401 PAGE AVE./PO BOX 457MICHIGAN CENTER, MI 49254PH: (517) 841-7140 FAX: (517) 764-6697CONTACT: DOREEN KURTZEMAIL: [email protected]

ADFAST CORPORATION2670 PAULUSST-LAURENT, QC H4S 1G1CANADAPH: (514) 617-1579CONTACT: DENIS PERRONEMAIL: [email protected]

ADHESIVE APPLICATIONS41 O’NIEL STREET EASTHAMPTON, MA 01027

PH: (413) 527-5030 FAX: (413) 527-0091CONTACT: STEVE PEPINEMAIL: [email protected]

ADHESIVES RESEARCH, INC.400 SEAKS RUN ROADP.O. BOX 100GLEN ROCK, PA 17327PH: (717) 235-7979 FAX: (717) 235-8466CONTACT: SALLY GROOMEEMAIL :[email protected]

ADVANTAGE MFG CORP.788 OLD DUTCH ROADVICTOR, NY 14564PH: (585) 742-1570 FAX: (585) 742-6287CONTACT: GREG TURNER

EMAIL:[email protected]

ALUMINUM EXTRUSIONS, INC.140 MATTHEWS DR.SENATOBIA, MS 38688PH: (662) 562-6663 FAX: (662) 562-4190CONTACT: KEVIN MCNAILEMAIL:[email protected]

AMERICAN SEALANTS, INC.3806 OPTIONPASSFORT WAYNE, IN 46818PH: (260) 489-0728 FAX: (260) 489-0519CONTACT: BRIAN HARRUFFEMAIL: [email protected]

AMESBURY GROUP, INC.,

TEXTILE DIVISION159 WALKER ROADSTATESVILLE, NC 28625PH: (704) 878-6884FAX: (888) 787-0107CONTACT: GLENDA SWANKEMAIL : [email protected]

AMESBURY GROUP – EXTRUDEDDIVISION57 SOUTH HUNT ROADAMESBURY, MA 01913PH: (978) 834-3235 FAX: (800) 289-6699CONTACT: ASHRAF ALFIEMAIL: [email protected]

ASHLAND HARDWARE SYSTEMSVIA MONTERREYMATAMOROS #600PARQUE INDUSTRIAL MILLENIUMAPODACA, N.L., MEXICO C.P. 66600PH: (815) 963-9631CONTACT: LOUIE PARADISOEMAIL: louie. [email protected]

ASHLAND PRODUCTS790 WEST COMMERCIAL AVENUELOWELL, IN 46356-2249PH: (815) 963-9631CONTACT: LOUIE PARADISOEMAIL: [email protected]

ASTRO SHAPES INC.65 MAIN STREETSTRUTHERS, OH 44471PH: (330) 755-1414CONTACT: SCOTT SHAFFEREMAIL: [email protected]

BonL MANUFACTURING CO.508 WILSON ST.KENTLAND, IN 47951PH: (219) 474-5136 FAX: (219) 474-6892CONTACT: ROGER CANTERBURYEMAIL: [email protected]

BonL MANUFACTURING CO.PO BOX 279 HWY. 53CARTHAGE, TN 37030PH: (615) 683-8291CONTACT: PATRICIA DRIVEREMAIL: [email protected]

BOSTIK, INC.701 VETERANS CIRCLEWARMINSTER, PA 18974PH: (215) 957-0690 FAX: (215) 957-0716CONTACT: KURT ZINTNEREMAIL: [email protected]

BRONZE CRAFT CORP. (THE)37 WILL STREET

NASHUA, NH 03061PH: (800) 488-7747 FAX: (603) 883-0222CONTACT: JIM LAJEUNESSEEMAIL : [email protected]

BSI HARDWARE / AMESBURY

GROUP517 EAST 52ND STREET NORTHSIOUX FALLS, SD 57104PH: (800) 234-1963CONTACT: GARY NEWMANEMAIL: [email protected]

CALDWELL MANUFACTURING CO.PO BOX 92891, 2605 MANITOU RD (14624)ROCHESTER, NY 14692PH: (716) 352-3790/(800) 388-0165FAX: (716) 352-3729CONTACT: DOUGLAS CONGDONEMAIL: [email protected]

CAPITAL TAPE CO., INC.4920 COMMERCE PARKWAYCLEVELAND, OH 44128PH: (216) 292-3455CONTACT: NEIL SMALLEMAIL: [email protected]

CHEM LINK INC.353 EAST LYON STSCHOOLCRAFT, MI 49087PH: (269) 679-4440 FAX: (269) 679-4448CONTACT: JAMES LARKEEMAIL: [email protected]

C.R. LAURENCE CO., INC.2503 EAST VERNON AVENUELOS ANGELES, CA 90058-1897PH: (323) 588-1281

CONTACT: GARY BYRUMEMAIL: [email protected]

DIGGER SPECIALTIES, INC.3639 DESTINY DRIVEBREMEN, IN 46506PH: (574) 546-2811 FAX: (574) 546-5099CONTACT: JESSE HEINESEMAIL: [email protected]

DOOR HARDWARE/AMESBURYGROUP620 EAST 54 TH ST NORTHSIOUX FALLS, SD 57104PH: (605) 782-0446 FAX: (605) 336-9429CONTACT: GARY TAGTOWEMAIL: [email protected]

DOW CORNING CORP.2200 WEST SALZBURG ROADAUBURN, MI 48611PH: (989) 496-4000CONTACT: KELLY ALLOREEMAIL: [email protected]

ECHO TAPE5645 DANIELS STREETCHINO, CA 91710-9015PH: (909) 606-5100CONTACT: STEPHEN GREVATTEMAIL: [email protected]

mailto:[email protected]


































mailto:louie.%[email protected]














































































August 1, 2011Page 14 of 14

EXTRUDER’S, INC. 930 HENSLEY LANEP.O. BOX 1719WYLIE, TX 75098PH: (972) 442-3535 FAX: (972) 442-1063CONTACT: WILLIE SUMMERVILLEEMAIL: [email protected]

FASCO DIE CAST, INC.6625 ORDAN DRIVE UNIT #1MISSISSAUGA, ONT L5T 1X2CANADA

PH: (905)670-8559 FAX: (905) 670-8560CONTACT: FENG CHENEMAIL: [email protected]

FLEXCON INDUSTRIAL LLC6110 RITTIMAN RDSAN ANTONIO, TX 78218PH: (800) 854-0361 FAX: (210) 798-1920CONTACT: SACHIN JAINEMAIL: [email protected]

GASKA TAPE INC.1810 W. LUSHER AVE.ELKHART, IN 46517PH: (574) 294-5431 FAX: (574) 522-7618CONTACT: CHRIS HABEGGEREMAIL: [email protected]

GRAHAM ARCHITECTURALPRODUCTS1551 MT. ROSE AVE.YORK, PA 17403PH: (717) 849-8100 FAX: (717) 849-8148CONTACT: DENNIS KELLEYEMAIL: [email protected]

H. B. FULLER COMPANY1200 WILLOW LAKE BLVD.ST. PAUL, MN 55164PH: (651) 236-5401 FAX: (651) 236-5119CONTACT: JOHN GREENZWEIGEMAIL: [email protected]

HENKEL CORPORATION(formerlyNat'l Adhesives)10 FINDERNE AVENUEBRIDGEWATER, NJ 08807PH: (800) 797-4992 FAX: (908) 685-5005CONTACT: LISA KELLYEMAIL: [email protected]

HENKEL CORPORATION26235 FIRST STREETWESTLAKE, OH 44145PH: (440) 250-7792CONTACT: MATT CANNINGEMAIL: [email protected]

HOPE GLOBAL50 MARTIN STREET

CUMBERLAND, RI02864PH: (401) 333-8990 FAX: (401) 334-6443CONTACT: CARLOS NEVESEMAIL: [email protected]

HYDRO ALUMINUM117 BLAKE DAIRY ROADBELTON, SC 29627PH: (864) 338-8000CONTACT: DARRELL EDWARDSEMAIL: [email protected]

INTEK PLASTICS INC.800 EAST 10 TH STREETHASTINGS, MN 55003PH: (651) 480-5127 FAX: (651) 437-3805CONTACT: JASON DOHMENEMAIL: [email protected]

INTERNATIONAL PRODUCT SOURCES10260 NW SOUTH RIVER DRMEDLEY, FL 33178PH: (305) 805-0086CONTACT: JASON VILLEGA

EMAIL: [email protected]

J OHN EVANS’ SONS, INC. 1 SPRING AVENUELANSDALE, PA 19446PH: (215) 368-7700 FAX: (215) 368-9019CONTACT: FRED KERSHAWEMAIL: [email protected]

KAM KIU ALUMINUM EXTRUSIONCO., LTD.SHI QUIAO INDUSTRIAL ZONE,DAJIANG COUNTYTAI SHAN, GUANG DONG, P.R.C.529261PH: (604) 945-3336CONTACT: RACHEL JUEMAIL: [email protected]

KERN-LIEBERS USA, INC.1510 ALBON ROADHOLLAND, OH 43578PH: (419) 865-2437 FAX: (419) 865-2738CONTACT: JOHN HENNESSEYEMAIL: [email protected]

KEYMARK CORPORATION2540 KNIGHTS STATION RD.LAKELAND, FL 33810PH: (863) 858-5500CONTACT: JOE CRENNAEMAIL: [email protected]

KEYMARK CORPORATION1188 CAYADUTTA STREETFONDA, NY 12068PH: (518) 853-3421 FAX: (518) 853-3130CONTACT: MIKE DRINDAKEMAIL: [email protected]

LAUREN MANUFACTURING2228 REISER AVENUE SENEW PHILADELPHIA, OH 44663PH: (330) 339-3373 FAX: (330) 339-6554CONTACT: SHERYL ASHLEMANEMAIL: [email protected]

LIAO NING ZHONG WANG GROUP299 WENSHENG ROADLIAOYANG CITY

LIAONING PROVINCE 111003CHINAPH: (909) 598-7933 FAX: (909) 598-4799CONTACT: DAVID PLUMBEMAIL: [email protected]

LINETEC725 S. 75TH AVENUEWAUSAU, WI 54401PH: (715) 843-4100 FAX: (800) 236-2589CONTACT: CARA BAHLOWEMAIL: [email protected]

MAY NATIONAL ASSOCIATES, INC.995 TOWBIN AVE.LAKEWOOD, NJ 08701PH: (973) 473-3330 FAX: (732) 886-5440CONTACT: BRUCE LAKATOSHEMAIL: [email protected]

MENNIE CANADA LIMITED71 INNOVATION DR,BLOCK 3, UNIT 4VAUGHAN, ON L4L 1A5CANADAPH: (905) 850-1177 FAX: (905) 850-3383

CONTACT: IRWIN LIEMAIL: [email protected]

MIKRON INDUSTRIES, INC.1034 6 TH AVE. NORTHKENT, WA 98032PH: (800) 456-8020CONTACT: PRESTON TIDEMANEMAIL:[email protected]

MOMENTIVE PERFORMANCEMATERIALS260 HUDSON RIVER ROADWATERFORD, NY 12188PH: (518) 237-3330 FAX: (518) 233-3931CONTACT: DAVID FRENCHEMAIL: [email protected]

NORTHERN ARCHITECTURALPRODUCTS, INC.550 APPLEWOOD CRESCENTBLDG. 1CONCORD, ON L4K 4B4CANADAPH: (800) 446-8680 FAX: (905) 326-0487CONTACT: PHIL KINGEMAIL: [email protected]

NOVAGARD SOLUTIONS5109 HAMILTON AVE.CLEVELAND, OH 44114PH: (216) 881-8111 FAX: (216) 881-6977

CONTACT: TERRY SMITHEMAIL: [email protected]

NUCO INC.150 CURTIS DRIVEGUELPH, ON N1K 1N5CANADAPH: (519) 823-4994CONTACT: KEITH BREBNEREMAIL: [email protected]

OMNIGLASS LTD.1205 SHERWIN ROADWINNIPEG, MB R3H 0V1CANADAPH: (204) 987-8522 FAX: (204) 694-9336CONTACT: DOUG WILLSEY


PANASIA ALUMINUM CHINA, LTD.SANLIAN SECTION, GUANGSHANROADLICHENG TOWN, ZENGCHENG CITYGUANGDONG PROVINCE 11300CHINAPH: (8620) 8263-1030 FAX: (8620) 8262-7828CONTACT: RAY LIEMAIL: [email protected]
























































































































PECORA CORPORATION165 WAMBOLD RD.HARLEYSVILLE, PA 19438PH: (215) 723-6051 FAX: (215) 721-0286CONTACT: MICHAEL MURPHYEMAIL: [email protected]

P.H. TECH, INC.8650 BOUL. DE LA RIVE-SUDC.P/PO BOX 220LEVIS, QC G6V 6N8CANADA

PH: (418) 833-3231 FAX: (418) 833-6847CONTACT: REJEAN LEVESQUEEMAIL: [email protected]

PRES-ON TAPE AND GASKET39 FACTORY ROADADDISON, IL 60101PH: (800) 323-7467CONTACT: JOHN GIANATASIOEMAIL: [email protected]

PROFILE EXTRUSIONS COMPANYPO BOX 121, ANDERSON ROADROME, GA 30162PH: (706) 234-7558 FAX: (706) 234-7649CONTACT: DANNY THOMASEMAIL: [email protected]

PROFINEZWEIBRUCKER STRASSE 200D-66954 PIRMASENSGERMANYCONTACT: MANFRED HUEBLEREMAIL: [email protected]

ROTO FRANK OF AMERICAP.O. BOX 599RESEARCH PARKCHESTER, CONNECTICUT 06412PH: (860) 526-4996 x728CONTACT: CHRIS GRIFFINEMAIL: [email protected]

SAINT GOBAIN PERFORMANCEPLASTICS CORP.ONE SEALANTS PARKGRANVILLE, NY 12832PH: (518) 642-2200 FAX: (518) 642-2793CONTACT: STEWART DITTMEIEREMAIL: [email protected]

SAPA EXTRUSIONS, INC.2905 OLD OAKWOOD ROADGAINESVILLE, GA 30504PH: (770) 503-0389CONTACT: BOBBY GARRETTEMAIL: [email protected]

SAPA EXTRUSIONS, INC.

2500 ALUMAX RD.YANKTON, SD 57078PH: (605) 665-6063 FAX: (605) 668-2347CONTACT: KEN BRUCEEMAIL: [email protected]

SCHLEGEL SYSTEMS, INC.1555 JEFFERSON ROADPO BOX 23197ROCHESTER, NY 14692PH: (585) 427-7200 FAX: (585) 475-9758CONTACT: MARK FOSTEREMAIL: [email protected]

SCHNEE-MOREHEAD, INC.PO BOX 171305, 111 N. NURSERY RDIRVING, TX 75015PH: (972) 554-3952/(800) 878-7876FAX: (972) 554-3934CONTACT: LORI MARINOEMAIL: [email protected]

SECURISTYLE LIMITEDKINGSMEAD INDUSTRIAL ESTATEPRINCESS ELIZABETH WAYCHELTENHAM, GLOUCESTERSHIRE

GL51 7REUNITED KINGDOMPH: (012) 42-221200FAX: (012) 42-232923CONTACT: DARREN KITCHINEMAIL: [email protected]

SELENA USA, INC.21715 BECK DR.ELKHART, IN 46516PH: (574) 523-0400 FAX: (574) 523-0499CONTACT: DAVID KANTZEMAIL: [email protected]

SIERRA ALUMINUM11806 PACIFIC AVE.FONTANA, CA 92337PH: (951) 360-8292CONTACT: SHAYNE SEEVEREMAIL: [email protected]

SIKA CORPORATION30800 STEPHENSON HIGHWAYMADISON HEIGHTS, MI 48071PH: (248) 577-1025CONTACT: JEFF WOODFORDEMAIL: [email protected]

SIKA CORPORATION201 POLITO AVE.LYNDHURST, NJ 07071PH: (973) 473-3330 FAX: (973) 473-7423CONTACT: BRUCE LAKATOSH


SILCO INC.7635 ST. CLAIR AVE.MENTOR, OH 44060PH: (440) 975-8886 FAX: (440) 975-8887CONTACT: DAVID GREBENECEMAIL: [email protected]

SIMONTON WINDOWSONE COCHRANE DRIVEPENNSBORO, WV 26415PH: (304) 659-2903CONTACT: CRISTEN BACAEMAIL: [email protected]

SMARTER SEALANTS

14 EASTERN PARK RD.EAST HARTFORD, CT 06108PH: (617) 648-6609CONTACT: CHRIS RIPLEYEMAIL: [email protected]

STERN & COMPANY18100 JEFFERSON PARK ROAD, STE 101CLEVELAND, OH 44130PH: (440) 239-4200 FAX: (440) 239-4202CONTACT: MIKE MONAGHANEMAIL: [email protected]

TBP CONVERTING400 THOMAS DR. SUITE 411PHOENIXVILLE, PA 19460PH: (610) 482-6000 FAX: (610) 933-4710CONTACT: DAVID SCHUREMAIL: [email protected]

TESA TAPE, INC.324 S. UNION ST.SPARTA, MI 49345PH: (616) 887-3152CONTACT: RENAE SHINDORF


TREMCO, INC.215 WICKSTEED AVENUETORONTO, ON M4H 1G7CANADAPH: (416) 421-3300CONTACT: LUIS CARDONAEMAIL: [email protected]

TROJAN POWDER COATING CO.2215 UNION BLVD.BAY SHORE, NY 11706PH: (631) 321-6717 FAX: (631) 968-5939CONTACT: KEITH REINEMAIL: [email protected]

TRUSEAL TECHNOLOGIES23150 COMMERCE PARKBEECHWOOD, OH 44122PH: (216) 910-1540 FAX: (216) 910-1506CONTACT: KEVIN ZUEGEEMAIL: [email protected]

TRUTH HARDWARE CORPORATIONPO BOX 427, 700 W. BRIDGE STREETOWATONNA, MN 55060PH: (507) 444-4766 FAX: (507) 451-5655CONTACT: MIKE ZIMMERMANEMAIL: [email protected]

ULTRAFAB, INC.1050 HOOK ROAD

FARMINGTON, NY 14425PH: (585) 924-2186 FAX: (585) 924-7680CONTACT: CHRIS BULLOCKEMAIL: [email protected]

UNIQUE BALANCE SYSTEMSINTERNATIONAL8301 MARCONIANJOU, QC H1J 2W4 CANADAPH: (800) 663-1353 FAX: (514) 493-0571CONTACT: JACQUES MENARDEMAIL: [email protected]

V. HIMARK (USA) INC.16057 FOOTHILL BLVD.IRWINDALE, CA 91702PH: (626) 305-5766

CONTACT: CINDY WUEMAIL: [email protected]

VANGUARD, A DIVISION OFVPL ENTERPRISES LTD.20160 92A AVENUELANGLEY, BC V1M3A4CANADAPH: (604) 881-5622 FAX: (604) 881-7835CONTACT: ANDREA WONGEMAIL: [email protected]





























































































































VENTURE TAPE CORPORATIONPO BOX 384, 30 COMMERCE ROADROCKLAND, MA 02370PH: (800) 343-1076FAX: (781) 871-0065CONTACT: BRIAN HOMMELEMAIL: [email protected]

VISION INDUSTRIES GROUP, INC.500 METUCHEN RDSOUTH PLAINFIELD, NJ 07080PH: (800) 220-4756 FAX: (800) 294-0743CONTACT: JOE BLACKWELL


WAI LUNG INDUSTRIAL CO., LTDTAK WING INDUSTRIAL BLDG NO. 3TSUN WAN ROADTUEN MUN, NEW TERRITORYHONG KONG, CHINACONTACT: WESLEY TANGEMAIL: [email protected]

WINCO WINDOW COMPANY6200 MAPLE AVE.ST. LOUIS, MO 63130PH: (314) 725-4362 FAX: (314) 725-1419CONTACT: CRAIG LEWISEMAIL: [email protected]

YKK AP AMERICA332 FIRETOWER ROADDUBLIN, GA 31021PH: (478) 277-1955 FAX: (478) 277-1950CONTACT: SHANE TANNER


ZHAOQING ASIA ALUMINUMFACTORY CO.ASIA ALUMINUM INDUSTRIAL CITYDAWANG HIGH & NEW TECH ZONEZHAOQING, GUANGDONG PROVINCE52238CHINACONTACT: ALAN HOEMAIL: [email protected]

American Architectural Manufacturers Association1827 Walden Office Square, Suite 550Schaumburg, IL. 60173-4268Phone (847) 303-5664Website www.aamanet.org






















Aama Verified Components List 8-1-11(2)

Documents

Transcript of Aama Verified Components List 8-1-11(2)