A99-AISG-CNTRL-A AISG Controller Kit Portable AISG 2.0/1.1...
Transcript of A99-AISG-CNTRL-A AISG Controller Kit Portable AISG 2.0/1.1...
westell .com
General DescriptionWestell’s AISG Controller Kit is a convenient tool for on-site
maintenance and service of AISG devices such as Westell’s line
of variable gain Tower Mounted Amplifiers (TMAs) or other
manufacturers’ Remote Electronic Tilt (RET) antennas. Included in
Westell’s AISG controller kit is an AISG controller (with an AC power
adapter and cord), a Current Injector Model (CIM), a USB-to-USB cable
to interface the controller with an AISG device, and an RF adapter for
the CIM (7/16 DIN female to female). All kit parts come shipped inside
a durable, rigid-plastic carrying case with foam insert, for protection,
shock-absorption, and convenience.
A99-AISG-CNTRL-A AISG Controller Kit
Portable AISG 2.0/1.1 Controller
Page 1 of 2
Application Diagram
Model Number
• A99-AISG-CNTRL-A
Features & Benefits
• Controls gain settings for the Westell series of variable gain
TMAs
• Controls tilt settings of RETs
• Compliant with Antenna Interface Standards Group
(AISG 1.1 & v2.0) standard
• Compact size
• Simple operation
• Kit includes AISG controller, cables, AWS-CIM-R+, 7/16 DIN
adapter and hard plastic carrying case
AISG Control Cables
Copyright © 2015 by Westell, Inc. All Rights Reserved. Westell, ClearLink, Kentrox, and Optima
Management System are registered trademarks of Westell, Inc. All other names are trademarks of their
respective owners. Information is correct at time of printing and is subject to change without notice.
Westell, Inc. is an Equal Opportunity/Affirmative Action employer.
westell .com
030-200278 rA 12/09/15
Page 2 of 2
A99-AISG-CNTRL-A
AISG Adapter/Controller Specifications AISG Connectors 1 female connector
Max. output to AISG devices 17W
Protocol to TMA (or RET) AISG 1.1 & v2.0
Communication ports USB 1.1/2.0
Max. number of devices* Up to 24 devices
LED indicators PWR, 12V, TX Data, RX Data
Dimensions 1.83” x 1.36” x 4.88” (47 mm x 35 mm x 125 mm)
USB cable USB 2.0 revision cable, 6 feet (1.83 meters)
Operating temperature 0 C to + 55C
CIM Specifications Frequency range 700-2800 MHz
DC input (nominal) 12V @ 3A max.
DC In to ANT resistance 1Ohm
Bias port return loss > 6 dB (AISG 2.176 MHz)
DC input connector AISG 8-pin male
RF connector to TMA/ANT 716 DIN male
Additonal Specifications Carrying case 12.5” x 8.75” x 5”, black, high
density polyethylene double walls, two latches, folding handle, rounded corners
AISG cable 8-pin mael to 8-pin female3 meters (9.84 feet)
RF adapter 716 DIN female to 7/16 DIN female jack in series
Kit Weight w/o case 1.5 Kg (3.3 lbs, with accessories)