CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

ICONIA tab A500

Diagnostic Tool SOP

Release date : Apr. 14, 2011

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Preparation

Diagnostic tool - A500 Diagnostic Tool.zip

USB Driver of A500 for PC

USB cable

Micro SD card

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Tool installation

1. Install USB driver in PC/NB.2. Connect A500 device to PC/NB via USB cable3. Enable “USB debugging” in A500 (Settings Applications USB

debugging)

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Tool installation

4. Unzip file “A500 Diagnostic Tool.zip”. There are four files in the folder.

5. Run “Install_A500_DiagTool.bat”.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Tool installation

6. The Apps in A500, it should have an application “ACTP”. It’s the diagnostic tool.

7. Please launch it to start the testing.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Main Menu

In diagnostic tool, it can test Touch Panel, Display, Buttons, Speaker, MIC, Camera, SD and Vibrator functions. Select the function you want to test then tap “OK” to start.

Step 1 – Select the item

Step 2 – Tap “OK” to start testing

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 1.multituch1 (Touch Panel)

User your finger touch the yellow area as below screen and draw it alongthe square. The result is pass if you fill all yellow area then it backs to main menu.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 2.TouchLinearity (Touch Panel)

User your finger touch the yellow area as below screen and draw it alongthe “X”. The result is pass if you fill all yellow area then it backs to main menu.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 3.RGB (Display)

Continue to tap screen then display changes. Use this test item to verity any abnormal lines or dead pixels on LCD screen.

Finish

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 4.HWKeys Test (Keys)

Press volume up, volume down and lock keys to verify if all keys work. Color changes to green means key function works.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 5.Back Camera

Take device rear side face to an object. Tap “Photograph” icon to test picture taking.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 6.Speaker

Loud tone sounds in left speaker then switch to right speaker.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 7.Front MIC

Tap screen start the test. When “Recording” screen appears, voice to device front side. Then check the voice if recorded when switching to “Playing” screen.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 8.Rear MIC

Tap screen start the test. When “Recording” screen appears, voice to Device rear side. Then check the voice if recorded when switching to “Playing” screen.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 9.Front Camera

Take device front side face to an object. Tap “Photograph” icon to test picture taking.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 10.SD Card (SD read/write test)

Insert a micro SD card to device. Start the SD read and write test. It switches to success screen if pass the test.

System requests to insert a micro SD if you forget to insert a card.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Test item – 11.Vibrator

It starts vibrating for two seconds then switches to success screen if pass the test.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

It MUST uninstall diagnostic tool once the testing is done. DO NOTdisclose this tool out of service center.

Step 1Into “Running services” (Settings Applications Running services).

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

Step 2In “Running services”, select “All” and find the application “ACTP”.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

Step 3In ACTP application, select “Uninstall” to remove the tool.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

Step 4Select “OK” start to uninstall.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

Step 5“Uninstall finished” message pop-up when the process is complete.

CUSTOM

ERSATISFACTION

EXCELLENCE OPERATIONAL

Q&

I20 11

Un-installation procedure

Step 6Final check if diagnostic tool “ACTP” has been removed in Apps.