A0139710 Rimac-2WW 500mA Product sheet...A0139710 Rimac-2WW Trimless 2x11Watt COB-LED 3000K...
Transcript of A0139710 Rimac-2WW 500mA Product sheet...A0139710 Rimac-2WW Trimless 2x11Watt COB-LED 3000K...
Dimensions in mm
Recessed downlights
LED technology
THE ART OF LIGHTING
20INDOOR RATED
A0139710 Rimac-2WW Trimless2x11Watt COB-LED 3000K (Bridgelux BXRA-30E0800)
Lamptype: recessed down-lighthomogeneous 2x 35.4° light beamCRI: 80Housing: black painted alu housing & alu white painted fixtureWeight: 0.9 KgDimensions fixture: 173.5 x 91.5 x H79 mmFixture Classification: IP20 Class IIIOperating Power:Constant Current 500mA / Vf: 2x 21Power consumption: 2x 0.063A@220VAC = 2x 12.94WPF: 0.92Equivalent Luminus flux: eff = 2x 778LmEfficiency: 60.13Lm/W
Fixture included:Ÿ 20cm mounted cable with male connector
3000K
173.5 91.5 79.0 0.9202x692Lm2x500mA
31
100
222
182
,172x90
91.5
79
173.5
30°
3681 Lx0.32m
0.64m
Height
0.5m
1.0m 920 Lx
Nadir.E
4933 Lx
1233 Lx
Avg.Diam.
0.96m
1.28m
1.60m
1.91m
1.5m
2.0m
2.5m
3.0m
409 Lx
230 Lx
166 Lx
102 Lx
548 Lx
308 Lx
223Lx
137 Lx
Rimac-1WW (3000K) 35.4°
Note!: Illuminance of one LED (Rimac-2WW content 2x 3000K LED)
ON
1 2 3 4 5 6
A Non-Dimmable, using the LED Constant current Driver 500mA 35W (ordernr: A9950024)
Housing: White ABSWeight: 0.15KgDimensions in mm: 124.5 x 79 x 22
Constant current must be set to 500mA Set microswitches 6 to “ON“
@230VAC 500mA 35W / Vf: 2-72@110VAC 500mA 35W / Vf: 2-70
110-240V AC
SE
C
SE
C
PR
I
PR
I
VAUX
A9950024
LN
+-
+-
Dipswitch for selection output currencySet to 500mA: Switch 6 to “ON“
L
N
Attention!!Load min. 1 Rimac-2 Fixture (2 LED`s serial connected) to this driverLoad max. 1 Rimac-2 Fixtures (2 LED`s serial connected) to this driver
Attention!!Load min. 1 Rimac-2 Fixture (2 LED`s serial connected) to this driverLoad max. 1 Rimac-2, Fixtures (2 LED`s serial connected) to this driver
C Dimmable by 1-10V, using the A9950360 LED Constant current Driver EldoLED SoloDrive-30W SL0361 A
Housing: White ABSWeight: 0.21KgDimensions in mm: 210 x 40.4 x 33.5
LED constant current driver max. 30WPrimair: 120-277VAC 50/60HzSec: 500mA 25W / Vf: 2-55
Attention ! Constant Current output is standart set to 350mA and must be set to 500mAFor 500mA setting, the toolbox A9915056 is required
LN
120-277 VAC
L+ -
0-10V
~~
1-Channel 1-10V-Driver
+-LEDcodeToolbox-Pro (connection)NTC (connection)
LED output
LEDcodeNTC
1-Channel1-10V-Control(Jung 240-10)
Attention!!Load min. 1 Rimac-2 Fixture (2 LED`s serial connected) to this driverLoad max. 2 Rimac-2 Fixtures (2 LED`s serial connected) to this driver
B Dimmable by A9950011 & pulse switch
Cable clambs: max. 2.5mm²
Pulse Switch:• Short push to turn ON and OFF• Push and hold to increase or decrease light intensity
A9950017Sync conection-cable to next driver
Max 10 drivers can be controlled by one switch
100-240V AC
LED DriverA9950011
PR
I
SEC
NTC
VAUX
PUSH
1-10V
+-
+-
+
-+
-+
-+-
NL
1
ON
23456
NL
sync
A9950011Constant current @230VAC 500mA 35W / Vf: 2-72@110VAC 500mA 35W / Vf: 2-72
Dipswitch for selection output currencySet to 500mA: Switch 6 to “ON“
A9920587 male/female suspension cable 1.5mA9920588 male/female suspension cable 3.0m
A9920589 serial connection cable 1x male 2x female
A9920589 serial connection cable 1x male 2x female
A9920589 serial connection cable 1x male 2x female
D Dimmable by DMX-512, using the A9950044 3-channel EldoLED PowerDrive-50W (PWR0562 A1)
LN
• 3 separately Dimmable LED outputs• DMX/RDM cpmpatible • controllable by 3 DMX-Adresses
The constant current output is standart set to 350mAand must be set to 500mA by using the Toolbox Pro A9915056Also for other settings, the Toolbox Pro is required
Universal Voltage: 120-277VAC 50/60HzVf: min. 2V, each outputVf: max. 55V, each output
Dimensions in mm LxWxH: 152.5 x 76 x 30.1Weight: 0.372 Kg
LEDcodeToolbox-Pro (connection)NTC (connection)
120-277 VAC
DMX-Control
Attention!!Load min. 1 Rimac-2 Fixture to this driver (2 LED`s serial connected)Load max. 2 Rimac-2 Fixtures (2 LED`s serial connected) to one output of this driverTotal Load max. 2 Rimac-2 Fixtures (ech 2 LED`s serial connected) to this driver
A9920587 male/female connection cable 1.5mA9920588 male/female connection cable 3.0m
-
-
-
+ +
+ + -
12-32VDC IN
shield shield
DMX INTo upload showsequences with theToolbox A9915055
DMX OUT
Ext INConnect a momentary switchto select anothershow sequence
Advised compatible DMX Dimmable controller:
A9915050 Dimwheel
A9915062(63) ART-8D
or any DMX-controll Panel
24VDCPower-Supply
++ -- GNDART-8DDMX-ControlDimming each groupseparatly and creating8 dimming scenes
IR-Control
DMX OUT
A9920589 serial connection cable 1x male 2x female
A9950045 EldoLED PowerDrive-100W (PWR16 A1)4 separately Dimmable LED outputs controllable by 4 DMX- or DALI Adresses or 1-10VThe constant current output is standart set to 350mAand must be set to 500mAAll settings, can be changed by 3 MODE-buttons (M - +) below the LCD
120-277VAC
-
DALI
NL
+ -+
Sync -GND +
+
Ext in
- +-
4 LED groupsset to 700mAeach: max.55Vf
+-GND
DMX-Control
-GND +
24VDCPower-Supply
+ -
ART-8DDMX-ControlDimming each groupseparatly and creating8 dimming scenesincl. IR-control
0700
MODE buttons
LEDcodeToolbox-Pro (connection)NTC (connection)
Attention!!Load min. 1 Rimac-2 Fixtures (2 LED`s serial connected) to this driverLoad max. 1 Rimac-2 Fixtures (2 LED`s serial connected) to one output of this driverTotal Load max. 4 Rimac-2 Fixtures (2 LED`s serial connected) to this driver
A9920587 male/female connection cable 1.5mA9920588 male/female connection cable 3.0m
G Dimmable by using the A9950045 100W EldoLED Constant current Driver
Stand-alone controlled or by DMX, DALI or 0-10V
Universal Voltage: 100V~240V 50/60HzProgrammable Output: 4x 200mA-1050mAmin/max forward Voltage: 4x 2-57VDCDimensions L x W x H (mm): 388 x 42 x 30Weight: 0.705 Kg
The PowerDrive-100 can be set to different control-modes; • 1 DMX-Channel: Fader-1 controlls all 4 LEDs
• 2 DMX-Channels: Fader-1 controlls LED 1&2 Fader-2 controlls LED 2&3
• 4 DMX-Channels: Fader-1 controlls LED-1, Fader-2 controlls LED-2, Fader-3 controlls LED-3 Fader-4 controlls LED-4
Worldwide Certifications:• CE, • IEC 61347, IEC 62384, EN 55015, EN 55022, IEC 61000-3-2, IEC 61547• UL: pending
A9920589 serial connection cable 1x male 2x female
A9920589 serial connection cable 1x male 2x female
A9920589 serial connection cable 1x male 2x female
A9920589 serial connection cable 1x male 2x female
A995 EldoLED PowerDrive-600W PW6060R0048LED constant current driver max.600W • Dimmable by 0-10V, • Dimmable by DALI (4x DALI group)• Dimmable by DMX & RDM (32x DMX channel)
• Stand-alone with 9 default shows, up to 20 user-defined shows, uploadable with TOOLbox and TOOLbox software
Constant Current output is standart set to 350mAConnecting the Fortaleza fixture, it must be set to 500mA
V~27Universal input Voltage: 120 7V 50/60HzLed outputs: 32x 200mA-1050mAPower factor: > 0.9min/max forward Vol 3 x 2-48VDCtage: 2
Full dimming control: 100% to 0%, Choice of linear or logarithmic dimming curveMaximum (rated) power available over wide LED-voltage (30-55V) rangeNTC interface per 4 LED-outputs for robust thermal managementDi 482.6(19")x324x44.5(1HE)mensions L x W x H (mm):W 6.1 Keight: gWorldwide Certifications:• CE, • IEC 61347, IEC 62384, EN 55015, EN 55022, IEC 61000-3-2, IEC 61547• UL: pending
G Dimmable with EldoLED PowerDrive 6060R 32 outputs
DMX 2x RJ-45 (CAD-5)orange/white = DMX+orange = DMX-Broun/white = GND (shield)
The Driver has 32 outputchannels. Use two output-channels for loading 1x Rimac-2 fixture and load total max. 16 Rimac-2 fixtures (2 LED`s serial connected) to one driver.To avoid damages to the LED, all cables & plugs must be connected before switching on the power !
482.6 mm / 19.00”
44.5 mm
1.75”30.0 mm
1.18”
428 mm / 16.85”
ø 5.0 mm / 0.2”
LED code
LED code
LED code
LED code
LED code
LED code
LED outputs
1 2 3 4
+
-
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 DALI 0-10V IN
DMX IN
+
-+
-
LED code
LED code
OUT
IN
0-10V
M - +
Depth:329mm12.95"
A9920587 male/female suspension cable 1.5mA9920588 male/female suspension cable 3.0m
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32