![AMD Radeon™ HD 6750/67701].pdfAMD Radeon™ HD 6750/6770 User Guide Part Number: 137-41765-10](https://static.fdocuments.in/doc/165x107/5f8fa8edd5efc97c0c7b6ea2/amd-radeona-hd-6750-1pdf-amd-radeona-hd-67506770-user-guide-part-number.jpg)
AMD Radeon™ HD 6750/67701].pdfAMD Radeon™ HD 6750/6770 User Guide Part Number: 137-41765-10
A+ Wrap - Dominion Energy · A+ Wrap™ Milliken Infrastructure infrastructure.milliken.com...
2
Approved Uses The A+ Wrap system is most commonly used for pipelines and piping systems suffering from corrosion or mechanical damage. Repairable defects include: Type A Repairs • Dents • External Wall Loss • Internal Wall Loss (limited) • Gouges (limited) • Weld Defect • Manufactured Flaws (limited) Type B Repairs • Overwrap of stop gap (chemical resistance check required) Benefits • Ready to use • Water-activated, pre-impregnated material allows for easy installation • Can be applied on dry or wet surfaces, even underwater (when used with specialized filler materials and primer) • Up to 30 minutes working time once pouch is opened • Sets within an hour and fully cures after 24 hours at 78°F (26°C) • Used frequently as part of a custom designed repair • Conforms to any shape including elbows, tees, flanges, reducers & more Water Activated Composite Repair System A+ Wrap ™ Milliken Infrastructure infrastructure.milliken.com 855-655-6750 OIL, GAS + INDUSTRIAL The A+ Wrap ™ System is a high-strength, water-activated fiberglass composite pre-impregnated with moisture cured polyurethane resin. It is designed for simplification of installation for restoring the structural strength of degraded pipe with varying geometries. It is also able to be used for pressure containment under certain circumstances. Cluster Corrosion Defect Repaired using A+ Wrap Application A+ Wrap Pre-Cured Wrap Epoxy Wet Out Steel Sleeve Cut-Out Above Ground a a a a a Buried a a a a a Soil-to-Air a limited a limited limited Underwater a r r limited limited Splash Zone a limited limited limited limited
Transcript of A+ Wrap - Dominion Energy · A+ Wrap™ Milliken Infrastructure infrastructure.milliken.com...
Approved Uses
The A+ Wrap system is most commonly used for pipelines and piping systems suffering from corrosion or mechanical damage. Repairable defects include:
Type A Repairs • Dents• External Wall Loss• Internal Wall Loss (limited) • Gouges (limited) • Weld Defect• Manufactured Flaws (limited)
Type B Repairs• Overwrap of stop gap (chemical resistance check required)
Benefits• Ready to use
• Water-activated, pre-impregnated material allows for easy installation
• Can be applied on dry or wet surfaces, even underwater (when used with specialized filler materials and primer)
• Up to 30 minutes working time once pouch is opened
• Sets within an hour and fully cures after 24 hours at 78°F (26°C)
• Used frequently as part of a custom designed repair
• Conforms to any shape including elbows, tees, flanges, reducers & more
Water Activated Composite Repair System
A+ Wrap™ Milliken Infrastructure
infrastructure.milliken.com 855-655-6750
OIL, GAS + INDUSTRIAL
The A+ Wrap™ System is a high-strength, water-activated fiberglass composite pre-impregnated with moisture cured polyurethane resin. It is designed for simplification of installation for restoring the structural strength of degraded pipe with varying geometries. It is also able to be used for pressure containment under certain circumstances.
Cluster Corrosion Defect
Repaired using A+ Wrap
Application A+ Wrap Pre-Cured Wrap Epoxy Wet Out Steel Sleeve Cut-Out
Above Ground a a a a a
Buried a a a a a
Soil-to-Air a limited a limited limited
Underwater a r r limited limited
Splash Zone a limited limited limited limited
Water Activated Composite Repair System
A+ Wrap™ Milliken Infrastructure OIL, GAS + INDUSTRIAL
Girth Weld and Bend Repair
Corrosion Repair
Dent Repair
Corrosion Repair Before After
Before using any Milliken Infrastructure Solutions, LLC product, the user must review the most recent version of the product’s technical data sheet, material safety data sheet and other applicable documents, available at infrastructure.milliken.com or by calling 1-855-655-6750. Milliken Infrastructure Solutions, LLC is a subsidiary of Milliken & Company. The Milliken logo is registered by Milliken & Company and used under license by Milliken Infrastructure Solutions, LLC, all rights reserved. Technology
PW3001 – 0118
