Customer requirements based ERP customization using AHP technique.pdf
A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
-
Upload
tiberiustefan -
Category
Documents
-
view
213 -
download
0
Transcript of A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
1/17
A tutorial showing how to make a 3D origami frog using the modular origami technique. This frog is
made using 1/32 size pieces of paper. The difficulty is intermediate and doesnt consume too much
time.
How to make a Modular Origami Frog:
We will need a total of337 modules for this project.
265 Green units and 72 White units will be needed.
Steps to make these triangular units is given here.
http://artplatter.com/2011/08/how-to-make-a-modular-origami-pineapple/http://artplatter.com/2011/08/how-to-make-a-modular-origami-pineapple/http://artplatter.com/2011/08/how-to-make-a-modular-origami-pineapple/ -
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
2/17
Step 1:
We will start making a connector unit in white.
Step 2:
Keep adding white such that Row 1 has 5 units and Row 2 has 4 units.
Keep this aside. We will be using it later.
Step 3:
Then build green rows in the below design:
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
3/17
Rows are built by increasing the
number of units by one as you proceed:
Row 1 with 7 green.
Row 2 with 8 green.
Step 4:
Keep adding units till you have a row (7th Row) with 13 green units.
Step 5:
In the next Row (Row 8) as usual increase the number of units by 1 but use 1 white unit at both
the ends.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
4/17
This is how it looks at this step used 12 green units and 2 white units for this row.
Step 6:
Add the next row (Row 9), add 13 green and 1 white unit at each corner.
Step 7:
Add the next row (Row 10), add 12 green and 2 white units at each corner.
Step 8:
Now slowly bring the corners towards each other. We will join the corners using the white units set
we made in Step 3.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
5/17
Here it is joined together.
Step 9:
Start inserting Row 11 with white units.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
6/17
We will be adding 9 white units
and 12 green units in this row.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
7/17
A view of the model at this point.
Step 10:
Keep adding green and white units.
Row 12 - 11 Green and 8 White units
Row 13 - 10 Green and 7 White units
Row 14 - 9 Green and 6 White units.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
8/17
Step 11:
Now add only green units.
Keep reducing the number of units by 1 as you proceed to the next row.
Which means,
Row 15 (but only green units) with 8 units, Row 16 with 7 units and go on till you have 4 green units
in a row.
Step 12:
Now similarly add white units. In the next row insert 7 units (increase by 1) and thereafter reduce 1
unit as you go on till you have 3 units in a Row.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
9/17
This is the model we get at this point. Since we have inserted the green and white units separately,
we get a head like structure with a mouth.
Step 13:
For the thighs of the frog, make this structure.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
10/17
Step 14:
Make one more such piece.
Step 15:
For the legs, make the below structure.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
11/17
Step 16:
We will need 2 hind legs and 2 front legs for the frog.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
12/17
Step 17:
The legs will be glued on to the body of the frog. For this pull out one unit from the leg as shown
here.
Step 18:
Apply glue on this unit pulled out.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
13/17
Step 19:
Glue on the hind leg.
Step 20:
Now insert and glue the front legs.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
14/17
Step 21:
The thighs made in Step 13 are then glued on.
The math so far is:
Body + Head = 179 Green units
4 Legs x 12 = 48 Green units
2 Thighs x 19 = 38 Green units
Belly/Body = 72 White units
Step 22:
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
15/17
Two coils out of green paper strip have been made for the eyes of the frog.
Step 23:
White circles cut out of paper are glued on the front and back of the coil.
Step 24:
Eyes are drawn using black marker.
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
16/17
Step 25:
The eyes are glued on to the head of the frog to finish it!
How does the frog look next to my lotus? Isnt he just adorable?!!
-
7/29/2019 A-Tutorial-Showing-How-to-Make-a-3D-Origami-Frog-Using-the-Modular-Origami-Technique.pdf
17/17
Croak away!!!