A TO Z SAFETY Work Safe to Have a Life

636-528-5444

Judy Magby/Owner 100 Manda Ct Troy Mo 63379 636-443-5139 judy@atozsafety.com

A To Z Enterprise, LLC Mission Statement

It shall be the mission, goals, and desires of A To Z Enterprise, LLC to provide the best possible training for the construction industry, using the latest instruction methodology, lesson plans, and equipment. We promise to deliver up to date instructional materials and information along with the latest methods of testing and evaluation. Our clients are the most important portion of our business and we strive to provide them with the best information and certifications possible at an affordable price and in a timely manner.

“Safety through education is no accident”

A TO Z SAFETY “Safety through education is no accident”

636-528-5444 OSHA: OSHA COMPLIANCE AUDITS OSHA COMPLIANCE CONSULTING HAZMAT TRAINING HAZWOPER 8 HR AWARENESS HAZWOPER 24 HOUR HAZWOPER 40 HOUR TECHNICIAN HAZWOPER SUPERVISOR 8 HOURS ( MUST HAVE COMPLETED 40 HOUR

COURSE) HAZWOPER 8 HOUR REFRESHER OSHA COMPLIANCE COURSES: BLOODBORN PATHOGENS BASIC SAFETY INTRODUCTION HAZARD COMMUNICATION PERSONAL PROTECTIVE EQUIPMENT WORK-ZONE SAFETY ELECTRICAL AND HIGH-VOLTAGE HAZARDS FIRE PROTECTION/PREVENTION HAND-POWER TOOL SAFETY WELDING SAFETY FALL PROTECTION STEEL ERECTION WALKING AND WORKING SURFACES LADDERS AND SCAFFOLDING HORIZONTAL DRILLING HAZARDS HEAVY-EQUIPMENT, CRANE AND RIGGING SAFETY EXCAVATION TRENCHING AND SHORING FORKLIFT SAFETY LOCKOUT/TAGOUT CONFINED SPACE CONCRETE AND MASONARY RESPIRATOR TRAINING AND FIT TESTING CRANES AND DERRICKS OSHA 10 AND 30 HOUR COMPLIANCE COURSES

Health and Safety Programs:

SAFETY PROGRAM DESIGN SAFETY MANUAL DESIGN: (INCLUDING BUT NOT LIMITED TO) PROCESS SAFETY MANAGEMENT (PSM) OQ MANAGEMENT PLAN GENERAL PLANT SAFETY CONTROL OF HAZARDOUS ENERGY (LOCK OUT/TAG OUT) FLAMMABLE AND COMBUSTIBLE LIQUIDS PERSONAL PROTECTIVE EQUIPMENT (PPE) RESPIRATORY PROTECTION PORTABLE FIRE EXTINGUISHERS HAND AND POWER TOOLS ELECTRICAL SAFETY HAZARD COMMUNICATION (MSDS) COMPRESSED GASSES EMERGENCY ACTION/FIRE PREVENTION EMERGENCY RESPONSE ERGONOMICS (LIFTING SAFETY ETC…) EXPOSURE CONTROL FOR BLOODBORNE PATHOGENS GASES, VAPORS, FUMES, DUSTS, MISTS HAZARD ASSESMENT HEARING CONSERVATION HOUSEKEEPING MEDICAL SURVEILLANCE/FIRST AID FALL PROTECTION STAIRWAYS AND LADDERS WELDING AND CUTTING PROCEDURES HOTWORK EXCAVATION/TRENCHING CONFINED SPACES RIGGING LIFTS/HOISTS/CRANES FORKLIFT SAFETY/TRAINING SHORT SERVICE EMPLOYEE (SSE) LEAD SAFETY AND AWARENESS

DATABASE CONSULTING:

WE OFFER THIRD PARTY DATABASE CONSULTING ISNetworld PEC PREMIER

OPERATOR QUALIFICATION AND VERIFICATION:

VERIFORCE SKILLS EVALUATIONS PIPELINE PERFORMANCE EVALUATIONS/VERIFICATIONS OQSG OPERATOR QUALIFICATIONS AND TRAINING

COVERED TASKS

Prevention of Atmospheric Corrosion Understanding the function of preventing atmospheric

corrosion Perform an inspection of coatings Perform surface preparation Perform application of coatings Recognize and properly react to abnormal operating conditions

Electrical Inspection of Coatings

Perform electrical inspection of coatings Identify and respond to abnormal operating conditions

Catastrophic Line Failure

Understand the severity of a catastrophic line failure Recognize indications of a major leak Identify a catastrophic line failure Respond to a catastrophic line failure

Control Room Emergency Response Identify characteristics of hazardous liquids Recognize abnormal operating conditions and pipeline

emergencies Respond to abnormal operating conditions and pipeline

emergencies Perform emergency response procedures

Cathodic Protection Inspection on

Underwater Facilities Prepare and calibrate test equipment Take and record cathodic protection readings Identify and respond to abnormal operating conditions

Maintain Test Leads Define and understand the function of a test lead and the

equipment used to maintain it Correctly inspect and verify test lead continuity Repair or replace damaged test leads Explain how to recognize and react to abnormal conditions

Prevent External Corrosion on Underwater Pipeline

Inspect existing coatings Perform surface preparation for coating repair Repair coatings and applications Identify and respond to abnormal operating conditions

Inspect Cathodic Protection Rectifiers Obtain voltage and current output readings from rectifier and

check for proper rectifier operations Perform cathodic protection rectifiers on/off test Recognize and react to abnormal operating conditions when

inspecting cathodic protection rectifiers

Measure Wall Thickness of Underwater

Pipe Prepare and calibrate test equipment Measure wall thickness using ultrasonic testing methods Measure pit depth and diameter with pit gauge Identify and respond to abnormal operating conditions

Cathodic Protection Rectifier

Maintenance and Repair Troubleshoot and repair rectifiers Adjust a rectifier Recognize and react to abnormal operating conditions when

troubleshooting and repairing rectifiers

Conduct Underwater Cathodic Protection Remediation

Install galvanic anodes on submerged pipeline or facilities Identify and respond to abnormal operating conditions

Electrically Inspect Buried Pipe

Understand the definitions and functions of electrical inspection of bare pipe

Conduct soil resistivity measurements Perform soil-to-soil potential surveys Recognize and react to abnormal operating conditions when

electrically inspecting bare pipe

Conduct Temporary Marking of

Underwater Pipelines Locate pipeline Determine pipeline depth Install temporary pipeline marker Identify and respond to abnormal operating conditions

Conduct Underwater Valve Inspection, Operation, Maintenance and Repair Identify valve types and components Conduct visual inspection of valve and flanges Identify maintenance procedures Repair valve as instructed Identify and respond to abnormal operating conditions

Measure Wall Thickness Understand the requirements for measuring the wall thickness

of pipe Use a pit depth gauge Use an ultrasonic thickness meter (UST)

Collect RSTRENG Data Recognize and react to abnormal operating conditions when

measuring wall thickness

Movement of In-service Underwater

Pipeline Move in-service pipeline Conduct Inspection of Pipeline for Secondary Stresses, Physical

Damage, and Coating Damage Identify and respond to abnormal operating conditions

Conducting Cathodic Protection

Remediation Install electrical bonds Install Galvanic and Impressed Current Anodes Perform transformer/rectifier installations Perform test station installations Perform thermite welding procedures Locate, monitor, and clear shorted casings

Abandoning, Safe Disconnect,

Purging, and Sealing of Underwater Pipeline

Purge pipeline Safely disconnect pipeline Seal disconnected segment of pipeline Bury disconnected segment of pipeline Identify and respond to abnormal operating conditions

Monitoring for Internal Corrosion Safely extract or insert corrosion coupons Safely extract and insert corrosion probes Properly collect composite or spot samples for analysis of

corrosive properties Explain how to recognize and react to abnormal conditions

Installation, Replacement, or Repair of

Support Structures on Underwater Components

Replace or repair support structures on existing underwater components

Install additional underwater support structures to components Identify and respond to abnormal operating conditions

Inspect (Examine) Buried Pipe When

Exposed Inspect for physical damage Inspect the condition of the pipe coating Inspect for corrosion Explain how to recognize and react to abnormal conditions for

inspecting and examining buried pipe when exposed

Inspection of Underwater Pipeline

Facilities Conduct general pipeline inspection Inspect pipeline crossings Inspect flanged tie-ins Inspect repairs Inspect support structures Identify and respond to abnormal operating conditions

Inspect and Calibrate Overfill Protective Devices

Define overfill protective devices and their purpose Inspect and calibrate overfill protective devices Explain how to recognize and react to abnormal conditions for

inspecting and calibrating overfill protective devices

Perform Underwater Pipeline Repair

Activities Excavate pipeline Install mechanical split sleeve repair clamp Perform basic cutting operations Install mechanical coupling Install spool piece Identify and respond to abnormal operating conditions

Internal Corrosion Remediation

Adjust inhibitor injection rates to achieve an acceptable industry and company standard to prevent internal corrosion

Explain how to recognize and react to abnormal conditions for internal corrosion remediation

Operation of an Underwater Assembly Manually operate valves on an underwater assembly Identify and respond to abnormal operating conditions

Inspect Internal Pipe Surfaces

Recognize different types of internal corrosion and their mechanisms

Possess a working knowledge of tools used for internal corrosion evaluation

Recognize and react to abnormal operating conditions when inspecting internal pipe surfaces

Perform Underwater Pigging Activities Perform basic launching procedures Perform basic receiving procedures Identify and respond to abnormal operating conditions

Application and Repair of External

Coatings Identify and describe the different types of external coatings

and how they are applied Identify and describe the actions that must be taken in order to

apply and repair external coatings Recognize and react to abnormal operating conditions when

applying and repairing external coatings

Perform Underwater Flange Mating

Procedures Perform general flange assembly procedures Perform general flange disassembly procedures Identify and respond to abnormal operating conditions

Place and Maintain Line Markers

Define and understand the placing and maintaining of line markers

Locate a pipeline Install a line marker Inspect and maintain line markers and aerial line markers Recognize and react to abnormal operating conditions

Perform an Underwater Mechanical Hot Tap

Pipeline coating removal Conduct pipeline quality checks Install hot tap fitting Operate hot tapping tool and remove coupon Repair coating and bury pipeline as required Identify and respond to abnormal operating conditions

Inspecting Surface Conditions of Right-of-Way and Perform Leak Surveys for

Gas Pipelines Inspect surface conditions of right-of-way Perform gas leakage surveys Follow the company’s reporting protocols Recognize and react to abnormal operating conditions when

inspecting surface conditions of right-of-way and performing leak surveys

Inspecting Surface Conditions of Right-of-Way and Perform Leak Surveys for

Liquid Pipelines Inspect surface conditions of right-of-way Follow the company’s reporting protocols Recognize and react to abnormal operating conditions when

inspecting surface conditions of right-of-way and performing leak surveys

Inspect Navigable Waterway Crossings Define and demonstrate a working knowledge of inspecting

navigable waterway crossings Use probes, sonar and other methods to verify the location of a

pipeline and determine depth of cover Recognize and properly react to abnormal operating conditions

Inspection of Breakout Tanks

Define and demonstrate a working knowledge of regulatory compliance and inspection requirements for breakout tanks

Inspect breakout tanks in accordance with API Standard 653 Inspect breakout tanks in accordance with API Standard 510 Inspect other breakout tanks

Provide Temporary Marking of Buried

Pipeline Prior to Excavation Define and Understand the Function of Providing Temporary

Marking of Buried Pipeline Prior to Excavation and the Equipment Used to Mark It

Locate a Pipeline Install Appropriate Temporary Markers Identifying the Line Inspect and Maintain Temporary Line Markers

Inspection Following Excavation

Activities and Leak Survey after Blasting Define and demonstrate knowledge of inspection procedures

performed following excavation activities and leak survey performed after blasting

Utilize leak survey techniques Monitor for pressure loss Explain how to recognize and react to abnormal conditions for

inspection following excavation activities and leak survey after blasting

Provide Security for Pipeline Facilities Provide protection to the pipeline facilities Recognize and react to abnormal operating conditions when

providing security for pipeline facilities

Inspect Valves

Inspect valves Conduct a routine walk-around inspection Conduct an external integrity inspection of the valve Perform a function test of the valve Recognize and react to abnormal operating conditions when

inspecting valves

Repair Valves

Understand valve types and components Repair valves Repair actuators/operators Recognize and react to abnormal operating conditions when

repairing valves

Inspect, Test and Calibrate Relief Valves Recognize the purpose and function of relief valves Understand the terminology associated with inspecting, testing,

and calibrating relief valves Identify the procedures for the inspection, testing, and

calibration of relief valves Recognize and react to abnormal operating conditions when

inspecting, testing, and calibrating relief valves

Maintain/Repair Relief Valves Identify critical parts associated with a relief valve Disassemble, clean, inspect, repair, and replace internal

components of a relief valve Repair and calibrate the sensing device and reassemble and

reinstall the valve Recognize and react to abnormal operating conditions when

maintaining and repairing relief valves

Inspect, Test and Calibrate Pressure

Limiting Devices Recognize and locate pressure limiting devices Identify procedures for isolation or removal of a pressure

limiting device Inspect, test, and calibrate pressure limiting devices Repair and reinstall pressure limiting devices Recognize and react to abnormal operating conditions when

inspecting and testing and calibrating pressure limiting devices

Inspect, Test and Calibrate Pressure

Switches and Transmitters Identify types of testing methods and when they are used Inspect, test, and calibrate pressure switches and transmitters Recognize and react to abnormal operating conditions when

inspecting, testing, and calibrating pressure switches and transmitters

Verifying or Setting Protection Parameters for Programmable

Controllers and/or Instrumentation Control Loops

Understand the functions of a PLC and elements that are involved

Know how to verify data set points, parameters, and data location within PLC program

Perform calibration, testing, and documentation of system set points

Moving In-Service Pipe

Determine the allowable line pressure in a section of pipe to be moved

Prepare for pipeline movement activities Move in-service pipe Recognize and respond to abnormal operating conditions

Inspect Existing Pipe Following

Movement Define and demonstrate working knowledge of inspecting an

existing pipe following movement Inspect the pipeline for secondary stresses, physical damage,

corrosion and coating damage

Inspection of Clearance of Existing Pipe

to Underground Structures Define and demonstrate working knowledge of inspecting

clearances between existing pipes and underground structures as well as equipment used to perform the inspection

Assure minimum clearances are maintained and that interference and corrosion control testing are performed during the installation of foreign pipelines or structures

Abandoning, Safe Disconnect, Purging, and Sealing of Pipeline Facilities

Define and understand the function of and requirements for permanently or temporarily decommissioning or removing a pipeline facility from service

Safely disconnect pipeline facilities Purge pipeline facilities Seal a disconnected portion of pipeline

Installation, Replacement, or Repair of Support Structures on Existing or New

Aboveground Components Define and demonstrate working knowledge of replacement or

repair of support structures on existing or new aboveground components and how to perform it

Explain activities required to install additional or revised support structure elements to existing aboveground structures

Inspection Activities for Tie-ins, Pipe Replacements, or Other Components Connecting to an Existing Pipeline

Define and demonstrate working knowledge of inspection activities for tie-ins, pipe replacements, or other components connecting to an existing pipeline

Visually inspect pipe and pipe components Verify welder qualifications Ensure proper installation

Backfilling a Trench Following Maintenance

Define and demonstrate working knowledge about the function of backfilling a trench following pipeline maintenance

Perform backfilling operations on the pipeline following maintenance

Determine if a tamping tool and backhoe are used properly Determine the amount of cover required

Performing General Pipeline Repair

Activities Identify and demonstrate knowledge of procedures used for

general pipeline repair activities Install tight fitting sleeves Install oversleeves Install composite wrap sleeves Install mechanical split repair sleeves Install mechanical couplings Perform hot tapping Install pipeline plugs Install completion plugs

Conduct a Pressure Test

Define and understand the function of a pressure test and the equipment used to perform it

Conduct a pressure test and record the results Recognize and react to abnormal operating conditions when

conducting a pressure test

Maintenance Welding on Pipelines Supervise, inspect and or perform maintenance welding on

pipelines Repair arc burns Repair defective welds other than welds containing cracks Repair a cover pass on a weld containing a defect other than a

crack Repair butt welds containing cracks Repair previously repaired areas Replace welds or cylinders of pipe Recognize and react to abnormal operating conditions when

performing maintenance welding on pipelines

Operations of a Pipeline System

Identify the activities associated with the safe start-up of a pipeline

Identify the steps necessary for the safe shutdown of a pipeline Monitor and maintain pressures, flows, communications, and

line integrity Operate valves using manual or remote methods Recognize abnormal operating conditions for the task and

identify proper response

Computational Pipeline Monitoring

(CPM) Understand functions of CPM equipment Test, calibrate, repair, replace, and maintain CPM equipment Verify that the leak detection system meets design

specifications Explain how to recognize and react to abnormal conditions to

perform CPM leak detection techniques that assist in maintaining the integrity of a pipeline system

Operate Pressure Relieving Devices for Launching and Receiving Facilities

Identify the names and operation of the valves used on a launching facility

Explain the sequence of events needed to isolate, relieve pressure, and drain fluids from the launcher barrel

Understand the procedures involved with launching a pig Identify the names and operations of the valves used on a

receiving facility Understand the procedures involved with receiving a pig Explain the sequence of events needed to isolate, relieve

pressure, and drain fluids from the receiver barrel Recognize and react to abnormal operating conditions during

launching and receiving activities

Performing Maintenance on Valves

Identify components and maintenance of valves Perform valve maintenance Perform actuator/operator maintenance Recognize and react to abnormal operating conditions

Perform Flange Bolting Procedures Identify hazards associated with flange bolting procedures Perform general flange assembly procedures Perform general flange disassembly procedures Identify and respond to abnormal operating conditions

Tubing and Tube Fitting, Handling, and Installation

Demonstrate knowledge of instrumentation tubing, tube fittings and tubing components

Demonstrate the correct methods for handling tubing, tube fittings, and tubing components

Design or verify a correct layout of a tubing system Correctly cut and de-burr metal tubing Perform a correct 90 degree bend of metal tubing Perform installation of small diameter compression tube

fittings Recognize and properly react to abnormal operating conditions

Perform Leakage Survey

Define and demonstrate a working knowledge of leakage surveys and the equipment used to perform them

Perform visual surveys Perform a pipeline leakage survey using a combustible gas

detector Perform a pipeline leakage survey using a flame ionization

detector Recognize and react to abnormal operating conditions when

performing leakage surveys

Vault Maintenance

Define and demonstrate a working knowledge of vault maintenance

Perform vault maintenance

Purge Gas from a Pipeline

Define and understand how to safely purge hydrocarbons or air from a pipeline

Remove hydrocarbons from a pipeline Remove air from the pipeline Recognize and react to abnormal operating conditions when

purging a pipeline

Testing an Emergency Shutdown Device Define and understand the function of testing emergency

shutdown systems Test emergency shutdown systems Explain how to recognize and react to abnormal conditions for

testing an emergency shutdown system

Perform Incremental Pressure

Increases to Uprate MAOP Identify and demonstrate a working knowledge of performing

incremental pressure increases to uprate maximum allowable operating pressure

Perform incremental pressure increases Recognize and react to abnormal operating conditions when

performing incremental pressure increases in order to uprate MAOP

Operate Odorant Equipment

Understand the characteristics of odorants and the requirements for odorants in natural gas pipelines

Determine odorization injection rates and test for odorant levels

Recognize the different types of odorant injection equipment Operate and maintain an odorant injection system Explain how to recognize and react to abnormal conditions for

operating odorant equipment

Gas Detection and Alarm System

Maintenance and Performance Testing Identify and describe gas detection devices and their alarm

systems Calibrate, test, and maintain gas detection systems Recognize and react to abnormal operating conditions while

calibrating, testing, and maintaining gas detection and alarm systems

Isolation of a Gas Compressor Unit Isolate a gas compressor unit Prepare an isolated compressor unit for start-up Recognize and react to abnormal operating conditions when

isolating a gas compressor unit

Compressor Station Inspection and Testing of Remote Control Shutdown

Devices Identify and describe remote control shutdown devices and

associated terms Test remote control shutdown devices Recognize and properly respond to abnormal conditions that

may be encountered

Startup, Shutdown, and Operation of Turbine Driven Gas Compressor Unit Understand the operation of a turbine driven gas compressor

unit Start-up a turbine driven gas compressor unit Shutdown a turbine driven gas compressor unit Operation of an turbine driven gas compressor unit

Start-up, Shutdown, and Operation of an

Engine Driven Gas Compressor Unit Understand the operation of an engine driven gas compressor

unit Start-up an engine driven gas compressor unit Shutdown an engine driven gas compressor unit Operation of an engine driven gas compressor unit

General Abnormal Operating Conditions Define and understand an abnormal operating condition Recognize and respond to the malfunction or failure of pipeline

components Recognize and respond to physical damage to the pipeline

system Recognize and respond to the unexpected activation of a safety

device Recognize and respond to abnormal facility conditions Prevention of accidental of ignition

Documentation, Reporting, and OQ

Recordkeeping Identify and maintain required documentation Identify safety related conditions that require reporting Identify Operator Qualifications (OQ) record keeping

requirements

Inspecting and Remediating Pipeline

Hazard Protection Identify types of pipeline hazards Identify and inspect protective physical barriers Recognize and react to abnormal operating conditions

Damage Prevention During Excavation

Activities By or On Behalf of the Operator

Prepare for excavation activities Perform inspection activities during excavation Inspection activities following excavation Abnormal operating conditions

Conducting Annual Cathodic Protection Surveys

Define and understand the function of conducting annual cathodic protection surveys

Determine the measurement of structure-to-electrolyte potential

Perform close interval survey Perform testing to detect interference Ensure electrical isolation from foreign structures Perform an inspection and electrical test of bonds Complete a visual atmospheric inspection

A to Z Enterprise, LLC

100 Manda Court Troy, MO 63379

Office (636) 528-5444 Fax (636) 528-5443

_______________________________________________________________________________

RATE SHEET

OQSG (Operator Qualification Solutions Group) & Veriforce

Skills Evaluator: $950.00 per day* Proctor: $375.00 per day*

Computer Stations: $ 30.00 per day (per person)*

Class Room Training (Classroom training can be customized to your specific needs)

[Hazwhoper, Forklift, Aerial Lift, 10 & 30 HR OSHA, Fire Extinguisher]

4 HR $ 80.00 each min of 12 people $ 960.00 8 HR $128.00 each min of 8 people $1,024.00 10 HR $160.00 each min of 12 people $1,920.00 30 HR $600.00 each min of 6 people $3,600.00 40 HR $660.00 each min of 7 people $4,620.00

Travel time will be charged

Expense Cost Plus 10% *Day Rates are based on 10 HR days

Paul Geeding Judy Magby Geeding A To Z Enterprise, LLC 100 Manda Court Troy, MO. 63379 636-528-5444 Office 636-528-5443 Fax Paul’s Cell#314-280-7381 Judy’s Cell#636-443-5139

“Safety through education is no accident”