A quality assuredcompany

POLYURETHANE DISC ROLLER

Material Data

Property Nominal Value Applicable Standards

Tensile Strength 45 ±5 MPa AS 1683.11 / DIN 53504

Elongation 450-600 % AS 1683.11 / DIN 53504

Hardness 85 ±5 Shore A AS 1683.15 / DIN 53505

Abrasion Loss 10-20 mm3 AS 1683.21 / DIN 53516

Your Conveyor PartnerCall 1300 IDLERSwwww.cpsconveyors.com.au

127 (133Ø ), 152 (159Ø), 178 (181Ø)Manufactured using a steel shell, highly wear-resistant polyurethane discs and belt-friendly HDPE spacers.

Benefits• Excellent abrasion resistance• Assist with belt cleaning by allowing belt flexion

over our custom profile roller ring geometry• Easy to forecast roller change outs as the

rings provide a visual wear indicator during inspections

• Lower cost than rubber lagged equivalent rollers

• Lightweight option available utilising the HT Composite Shell

A quality assuredcompany

Available Diameters & Bearing Sizes

BRG 133 159 181

6205

6306

6308

6309

Your Conveyor PartnerCall 1300 IDLERSwwww.cpsconveyors.com.au

ApplicationsProven in applications where steel return rollers were failing through shell wear in 3 months due to large levels of material carry back; CPS Polyurethane disc rollers have lasted over 30 months. Based on our R&D testing to ASTM G65 standard, CPS polyurethane wore 4 times slower than a standard steel shell. CPS polyurethane disc return rollers can be expected to yield a minimum life increase in the range of 100-300% over steel in areas of high wear (typically head/tail ends, shuttle/take-up areas and convex curves).A full case study is available for this product. Please speak to your local CPS representative.