As a physician, I often heard concerns about allergies and asthma symptoms caused

primarily by irritants in dust, dirt and pollen. These are usually unseen by the naked eye, but nevertheless exist all around your living space. After listening to the needs of my patients, I realized that I could remedy the problem by developing an allergen vacuum called RAYCOP to help sanitize the surfaces where we sleep and live.

Based on scientific research, this new cleaning technique was designed to apply UV rays to sanitize and clean fabric surfaces in your home such as bedding and upholstery.

Through continuous research and development, we have been able to develop a very unique and effective product to effectively trap and help eliminate dust

mite matter, pollen and dirt.

A doctor’s work starts by

listening to patients

Dr. Sungjin (Michael) Lee, Founder and President of RAYCOP

WHY

THE

RAY

COP ALLERGEN VACUUM WAS C

REATED

Save water

energy time

You’ll find your RAYCOP allergen

vacuum instantly useful throughout your home —

everywhere you live, eat and sleep. A quick way to clean your

bed and table linens, you’ll especially love it for fabrics that can’t just

be tossed in the wash, like upholstery, drapes even decorative pillows.

The optimized synergy of UV sanitization, vibration, suction and filtration works

to carefully clean even delicate fabrics. With the RAYCOP allergen vacuum, your

home is more clean and fresh (without constantly doing laundry)

so your family can breathe and sleep better.

ESSE

NTIAL TO YOUR HOME

The most sacred places

in the home are your bed and couch. They’re also the likely home for dust mites, bacteria, viruses, and

pollen. House dust mites feed on human skin flakes and flourish in the stable environment of dwellings. Their matter is a common cause

of asthma and allergy symptoms worldwide. In addition, other microscopic intruders like bacteria and viruses are commonly found in public places like gyms

and schools, and are easily brought back home to our beds.

RAYCOP allergen vacuum’s patented RayClean Technology® is uniquely designed to effectively

eliminate dust mite matter, bacteria, viruses, pollen and other common allergens from bedding and other fabric surfaces. Now your whole home is a fresher and

cleaner environment.

WHY USE RAYCOP

Power Button

Press for a couple of seconds

Standby and press again

Start using and also change modes

D E L I C AT E M O D E

For delicate and lighter fabrics like curtains, decorative pillows, sheets

N O R M A L M O D E

For blankets, thick sheets, pillows, and comforters

H E AV Y M O D E

For sturdier fabric surfaces such as upholstery and mattresses

The various operating modes enable the optimal balance between the brush rotation, suction force, and vibration speed.

Control PanelChoose from 3 different modes by pressing on the power button:

Function Names

Alert to Wash Dust Box Filter

Alert to Replace Micro HEPA Filter

Dust Box Lamp

Delicate

Normal

Heavy

Lock Lamp

Operating Modes

HOW TO START

How to UseRAYCOP allergen vacuums are designed to be sturdy to ensure stability

and durability, but you’ll quickly see how easily the device glides on the surface. Slowly push and pull along the surface you want to clean 2 or 3 times.

Once the device is laid flat on the surface, the UV light will turn on.

Direct contact on the surface ensures effective cleaning so do not lift or angle the device.

RAYCOP was created to be used on various surfaces from heavy to delicate fabrics; the suction power was specifically calibrated to ensure there’s no damage to fabric surfaces.

If the device is lifted or angled, the UV light will automatically turn off.

PLEASE NOTE: The RAYCOP allergen vacuum was designed for fabric surfaces and is not recommended on wall to wall carpeting, wood, leather or metal.

HOW TO USE RAYCOP RS2

Dust Box Filter

UV Lamp Indicator Light

Air Vent

Power Cord Rewind Button

Micro HEPA Filter Cover

Micro HEPA Filter Cover( Equipped with HEPA Filter)

UV Lamp

UV Lamp Safety Sensor

UV Lamp Grille/Frame

UV Lamp Safety Sensor

Air Vent

Power Cord

Grille Hook

Rotating Brush

Pulsating Pads

UV Lamp Grille/Frame

UV Lamp Set

Function Display Panel

Power Button(Switch Modes)

Suction Width Guide

Dust Box FilterDetection Sensor

Dust Box Lamp

Dust Box

REMINDER : When it’s time to replace your parts, please use genuine RAYCOP parts.

To order please visit www.raycop.com or contact us at support@raycop.com

UV Ray Width Approx. 9in (23cm)

GET

TING TO

KNOW RAYCOP RS2

End Cap

Filter

BrushSlide the grille hooks at both ends until the green point appears to remove them.

Remove the brush from the cap side.

Detach the cap and remove house dust or hairs entangled in the brush. If the brush is excessively dirty, wash it with detergent or soap, rinse with water, and thoroughly dry.

Grille Hook

Green Point

Pull out the dust box as

shown below.

1

1

Remove the dust box filter by pressing the protrusions on both sides.

23

Brush

To order replacement parts (such as: the UV-lamp & HEPA filter)

please visit raycop.com/parts

3Air dry your filter in a

shaded area, do not use a dryer. Once dry, secure the

filter back into the dust box

To avoid dust from scattering into the air, submerge both the

dust box and filter in water and remove the filter from the dust box.

Note: If the filter is clogged, you may notice that the suction is weaker.

Clean the filter with a mixture of water: detergent (ratio 9:1).

2

Securely attach the dust box by pressing it into the cleaner until

the dust box lamp goes out.

4

CLE

ANING YOUR RAYCOP RS2

Dust Box Filter Detection SensorA safety device that prevents your device from operating without the dust box filter attached by using a sensor located on the dust box attachment.

Dust Box Filter Washing AlertIf house dust accumulates on the dust box filter, starts flashing red to inform you it’s time to wash the dust box filter.

House Dust LampThe house dust indicator is designed to light up during use so you can easily check how much dust has accumulated. Lock FunctionA safety function to prevent your device from accidentally operating by locking it when left for about 1 minute while the power plug is in an outlet.

Micro HEPA Filter Replacement Alert Starts flashing in red to inform you it’s

time to replace the micro HEPA filter with a new one.

Motor Overheating Prevention DeviceIf your device is continuously used for 30 minutes, the motor overheating prevention device automatically stops suction to prevent overheating the motor. This may occur if the dust box or filter is clogged with house dust.

Run Time Control SystemYou will hear 5 beeps right before your device automatically stops after running around 29 minutes.

UV Lamp Safety SensorA safety feature that automatically turns off the UV lamp when your device is moved away from the target. The UV lamp is automatically turned back on when your device is moved close to the target again.

UV (ultraviolet light) Blocking FeatureMinimizes UV emitted to areas other than the area being cleaned.

DESIGNED FOR SAFETY

WARNING – To reduce the risk of fire, electric shock, or injury:• Do not leave appliance when

plugged in. Unplug from outlet when not in use and before servicing.

• Do not use outdoors or on wet surfaces

• Do not allow to be used as a toy. Close attention is necessary when used by or near children.

• Use only as described in this manual. Use only manufacturer’s recommended attachments.

• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.

• Turn off all controls before unplugging.

• Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present.

• Always turn off this appliance before connecting or disconnecting motorized nozzle.

• Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.

• Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.

• Do not use without dust box and/or filters in place.

SAVE THESE INSTRUCTIONSTo reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

UV Lamp Caution: • Direct exposure to ultraviolet

radiation can cause serious skin burns and eyes.

• Do not touch the UV lamp during or immediately after use.

• Do Not directly emit the ultraviolet light from the UV lamp towards the eyes or skin of humans and animals.

• UV-C bulbs contain mercury, which is considered hazardous waste and is subject to Federal and/or state hazardous waste regulations. - In rare instances, (similar to

standard florescent light bulbs) mercury leakage could occur if the bulb breaks and could cause birth or reproductive issues.

• Please keep the UV lamp protective tube clean.- Inadequate and infrequent

maintenance may lower the transmission of ultraviolet light.

Other Precautions: • Do not use or store heating

appliances such as stoves or heaters, nor flammable substances such as combustible sprays near this product.

• Do not stick knives, thumbtacks, burning ash, toner powder or other inappropriate materials.

• If you notice any abnormal noise, odors, or smoke emanating from this product, immediately remove the power plug.

• Please visit raycop.com/maintain for specific instructions on proper cleaning and maintenance practices.

This product is intended for primarily for household use on mattresses, bed covers, bedding, pillows, cushions, sofas, and other fabric products.• Do not use for outdoor

purposes or on metal, leather, wood, liquids or other non fabric surfaces.

All RAYCOP products are designed with the highest safety standards.

I M P O RTA N T S A F E TY I N S T R U CT I O N SRead all instructions before using

SAFETY INSTRUCTIONS

Technical Specifications

Model RS2-100A

Serial Number

Warranty Period 1 year from the date of purchase (parts and additional products are not included)

Size 15 x 17 x 6in (383.1 x 434.8 x 166.4mm)

Weight Approximately 6lbs (2.77kg)

Power Consumption 300W

UV-C Lamp 11W (253.7nm)

Electronic Vibrator 4,600-5,000 RPM

Spinning Brush 200mm

Suction Mode 3 Modes

Retractable Power Cord 3.3ft (3.8m)

Air Filtration Dust Box Filter + HEPA Filter

UV Light Safety Mechanism Two Built in Sensors for Surface Detection

Motor Safety Heat Detection with Automatic Cutoff Switch

EPA Company No. 92492EPA Est. No. 92507-KOR-1

Produced For RAYCOP North America Inc.3875 Hopyard RoadPleasanton, CA 94588866.872.9267

• 3 Different Operating Modes

• 2 Separate Air Filtration Systems

• Rotating Brush to Remove Hair and Debris

• Powerful 11 Watt UV-C Lamp

• 4,600-5,000/Minute Vibration Capability

• Retractable Cord

• Cradle Included for Easy Storage

COMMITMENT TO QUALITY

R A Y C O P R S 2

RAYCOP Limited One-Year Warranty

The warranty period is valid one year from the date of original purchase. Follow the instructions below.

1. Locate original sales receipt and make note of your model and serial number.2. Call RAYCOP at 866.8RAYCOP or 866.872.9267 or email us at

support@raycop.com.3. You will be asked to provide your name, address, date of purchase,

model and serial number.4. RAYCOP will arrange shipping boxes to be sent to your home to recover

the product. Simply follow the instructions inside the box on how to send the device back to RAYCOP.

RAYCOP warrants its product to be free from defects in material and workmanship for a period of one year from the date of the original

purchase from RAYCOP or an authorized RAYCOP distributor. Proof of purchase is required for all warranty claims.

We thank you for being a customer of RAYCOP.

This warranty does not cover damage, defects or failure caused by or resulting from accident, external destruction, alteration, modification, abuse, misuse or misapplication of this product.

Please read all the documentations carefully to ensure RAYCOP was used as intended.

COMMITMENT TO QUALITY

www.raycop.comsupport@raycop.com866.8RAYCOP (872.9267)