A Correlation ofassets.pearsonschool.com/asset_mgr/current/201526/FL_Alignment... · Module...

of 10

A Correlation of

to the

Florida Department of Education Student Performance Standards

Electricity Course 8727200

of 10

SUBJECT: Career and Technical Education

GRADE LEVEL: 9-12 COURSE TITLE: Electricity COURSE CODE: 8727200

SUBMISSION TITLE: Electrical Level 1 (8th Edition), Electrical Level 2 (8th Edition) BID ID: 3061

PUBLISHER: Pearson Education, Inc., publishing as Prentice Hall PUBLISHER ID: 22-1603684-03

BENCHMARK CODE

BENCHMARK LESSONS WHERE BENCHMARK IS DIRECTLY ADDRESSED IN-DEPTH IN MAJOR TOOL (Include page numbers of lesson, a link to lesson, or other identifier for easy lookup by reviewers.)

04.0 Explain the importance of health, safety, environmental stewardship and related regulatory compliance--The student will be able to: 04.01 Clean the work area and maintain it in

a safe condition. Electrical Level 1 Module 26102-14 Electrical Safety: pgs. 10-17

04.02 Describe personal and jobsite safety rules and regulations that maintain safe and healthy work environments.

Electrical Level 1 Module 26102-14 Electrical Safety: pgs. 10-17

04.03 Identify and operate workplace-safety electrical devices.

Electrical Level 1 Module 26102-14 Electrical Safety: pgs. 1-10, 17, 27-31

04.04 Identify health-related problems that may result from exposure to work-related chemicals and hazardous materials, and know the proper precautions required for handling such materials.

Electrical Level 1 Module 26102-14 Electrical Safety: pgs. 1-4, 27-31

04.05 Explain emergency procedures to follow in response to workplace accidents.


04.06 Create a disaster and/or emergency response plan.


04.07 Explain the importance of CPR (cardiopulmonary resuscitation) and first aid.

Electrical Level 1 Module 26102-14 Electrical Safety: pg. 27

04.08 Describe "Right-to-Know" Law as recorded in (29 CFR.1910.1200).

This content is included in another NCCER course.

05.0 Identify, use and maintain the tools and accessories used in the electrical industry--The student will be able to:

of 10

BENCHMARK CODE


05.01 Identify and select tools, equipment, materials and wires to complete a job.

Electrical Level 1 Module 26107-14 Hand Bending: pgs. 1-17, 23-26 Module 26109-14 Conductors and Cables: pgs. 14 19

05.02 Drill holes in metal, wood and concrete for electrical wiring.

Electrical Level 1 Module 26108-14 Raceways and Fittings: pgs. 24-26

05.03 Lay out electrical devices, complying with regulations.

Electrical Level 1 Module 26105-14 Introduction to the National Electrical Code®: pgs. 6-11 Module 26109-14 Conductors and Cables: pgs. 2, 7-14 Module 26111-14 Residential Electrical Services: pgs. 4-7, 9-23, 26-27, 32-34, 38-40, 45-48, 57-59, 61-62

05.04 Install the following, complying with the appropriate local, state or national electric codes:

a. Conductors and cable b. Standard outlets and switch

boxes c. Explain cord connections on

equipment. d. Cords switches, receptacles

and dimmers, including a single-pole switched lighting circuit, a three-way switched lighting circuit and a four-way combination circuit.

Electrical Level 1 Module 26105-14 Introduction to the National Electrical Code®: pgs. 6-11 Module 26108-14 Raceways and Fittings: pgs. 2-12, 31-35, 40-43 Module 26109-14 Conductors and Cables: pgs. 2, 7-14 Module 26111-14 Residential Electrical Services: pgs. 4-7, 9-23, 26-27, 32-34, 38-40, 45-48, 57-59, 61-62

06.0 Demonstrate an understanding of basic Direct-Current (DC) electrical-circuit skills--The student will be able to: 06.01 Define the following terms: voltage,

current, resistance and power. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 1, 4-11, 19-21, 28 Module 26104-14 Electrical Theory: pgs. 3-9, 18

06.02 Measure voltage, amperage and resistance using industry standard electrical measuring devices.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 1, 4-11, 19-21, 28 Module 26112-14 Electrical Test Equipment: pgs. 3-10

of 10

BENCHMARK CODE


06.03 Analyze and explain a series, series-parallel and parallel circuit.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 10-11, 13, 28 Module 26104-14 Electrical Theory: pgs. 3-11, 18

06.04 Draw each type of circuit and calculate the circuit values.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 10-11, 13, 28 Module 26104-14 Electrical Theory: pgs. 3-11, 18

06.05 Explain and apply Ohm's Law. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 9, 20-21, 28 Module 26104-14 Electrical Theory: pgs. 6-7

06.06 Compute conductance and resistance of conductors and insulators.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 7-8, 16-17 Module 26104-14 Electrical Theory: pgs. 1-11

07.0 Apply mathematics knowledge and skills to electricity--The student will be able to: 07.01 Demonstrate knowledge of arithmetic

operations. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 5-9, 19-21 Module 26104-14 Electrical Theory: pgs. 1-11

07.02 Analyze and apply data and measurements to solve problems and interpret documents.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 5-9, 19-21 Module 26104-14 Electrical Theory: pgs. 1-11 Module 26110-14 Basic Electrical Construction Drawings: pgs. 1-7, 29-62

07.03 Construct charts/tables/graphs using functions and data.

Electrical Level 1 Module 26110-14 Basic Electrical Construction Drawings: pgs. 1-7, 29-62

08.0 Demonstrate an understanding of basic electricity--The student will be able to: 08.01 Explain the principles of

electromagnetism. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 3-4 Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-3, 33-41 Module 26202-14 Motors: Theory and Application: pgs. 19-20

of 10

BENCHMARK CODE


08.02 Explain the magnetic properties of circuits and devices.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 3-4 Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-3, 33-41 Module 26202-14 Motors: Theory and Application: pgs. 19-20

08.03 Relate electricity to the nature of matter.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pg. 3

08.04 Describe various ways that electricity is produced.

Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pg. 1-5

09.0 Read and interpret basic electric codes--The student will be able to: 09.01 Describe the importance of following

the local, state and national electric codes.

Electrical Level 1 Module 26105-14 Introduction to the National Electrical Code®: pgs. 1-11

09.02 Read and interpret basic electric codes, wiring plans and specifications.


09.03 Identify licensure requirements for electrical occupations.

Electrical Level 1 Module 26101-14 Orientation to the Trade: pgs. 9-10

09.04 Demonstrate knowledge of National Fire Protection Association (NFPA) 70E and how it relates to job safety.


10.0 Apply mathematics knowledge and skills to electricity--The student will be able to: 10.01 Solve basic algebraic formulas related

to electricity. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 5-9, 19-21 Module 26104-14 Electrical Theory: pgs. 1-11 Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-32, 36-41 Module 26204-14 Conduit Bending: pgs. 5-10

10.02 Solve basic trigonometric functions related to electrical theory.

Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-32, 36-41 Module 26204-14 Conduit Bending: pgs. 5-10

of 10

BENCHMARK CODE


10.03 Explain basic AC theory and solve related mathematical problems using appropriate test equipment.

Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-32, 36-41 Module 26204-14 Conduit Bending: pgs. 5-10

10.04 Solve math-related problems from measurements on training aids. (Optional)


11.0 Demonstrate further understanding of electricity--The student will be able to: 11.01 Explain molecular action as a result of

temperature extremes, chemical reaction and moisture content.


11.02 Explain how voltage is produced by chemical, mechanical, thermal, photoelectric and piezo electric means.


11.03 Identify electrical symbols in construction documents.

Electrical Level 1 Module 26110-14 Basic Electrical Construction Drawings: pgs. 14-16

12.0 Demonstrate science knowledge and skills related to electrical principles--The student will be able to: 12.01 Discuss the role of creativity in

constructing scientific questions, methods and explanations.

12.02 Formulate scientifically investigable questions, construct investigations, collect and evaluate data and develop scientific recommendations based on findings.

16.0 Demonstrate proficiency in electrical math problems and skills--The student will be able to: 16.01 Calculate wiring costs. Electrical Level 1

Module 26109-14 Conductors and Cables: pg. 3

of 10

BENCHMARK CODE


16.02 Draw an industrial electrical-wiring plan.


16.03 Describe the use of high-voltage test equipment.

Electrical Level 1 Module 26112-14 Electrical Test Equipment: pgs. 2-3

16.04 Describe how to test insulation. Electrical Level 1 Module 26112-14 Electrical Test Equipment: pgs. 7

16.05 Describe how to balance a load. Electrical Level 2 Module 26209-14 Grounding and Bonding: pg. 2

16.06 Use electrical related math skills. Electrical Level 1 Module 26103-14 Introduction to Electrical Circuits: pgs. 5-9, 19-21 Module 26104-14 Electrical Theory: pgs. 1-11 Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1-32, 36-41 Module 26204-14 Conduit Bending: pgs. 5-10

17.0 Demonstrate Alternating-Current (AC) circuit skills--The student will be able to: 17.01 Identify the physical and electrical

characteristics of capacitors and inductors.

Electrical Level 2 Module 26201-14 Alternating Current: pgs. 14 19 Module 26204-14 Motors: Theory and Application: pgs. 16-23

17.02 Demonstrate proficiency in measuring, testing and connecting a transformer.

Electrical Level 2 Module 26201-14 Alternating Current: pgs. 33-41

17.03 Apply the principles of transformers to AC circuits.


17.04 Identify the properties of an AC signal.

Electrical Level 2 Module 26202-14 Motors: Theory and Application: pgs. 40

17.05 Identify AC sources. Electrical Level 2 Module 26201-14 Alternating Current: pgs. 1

17.06 Analyze and apply the principles of transformers to AC circuits.


17.07 Analyze poly-phase circuits. Electrical Level 2 Module 26211-14 Control Systems and Fundamental Concepts: pgs. 4, 13 Module 26202-14 Motors: Theory and Application: pgs. 14-34

17.08 Install a simple poly-phase circuit. Electrical Level 2 Module 26202-14 Motors: Theory and Application: pgs. 14-34

of 10

BENCHMARK CODE


18.0 Explain the importance of employability and entrepreneurship skills--The student will be able to: 18.01 Identify and demonstrate positive

work behaviors needed to be employable.

Electrical Level 1 Module 26101-14 Orientation to the Electrical Trade: pgs. 10-12

18.02 Develop personal career plan that includes goals, objectives and strategies.


18.03 Examine licensing, certification and industry credentialing requirements.


18.04 Maintain a career portfolio to document knowledge, skills and experience.


18.05 Evaluate and compare employment opportunities that match career goals.


18.06 Identify and exhibit traits for retaining employment.


18.07 Identify opportunities and research requirements for career advancement.


18.08 Research the benefits of ongoing professional development.


18.09 Examine and describe entrepreneurship opportunities as a career planning option.


19.0 Install residential wiring--The student will be able to: 19.01 Identify residential-wiring

requirements and specifications in accordance with a wiring plan.

Electrical Level 1 Module 26111-14 Residential Electrical Services: pgs. 1-14

19.02 Draw a residential wiring plan, using electrical-wiring symbols.

Electrical Level 1 Module 26110-14 Basic Electrical Construction Drawings: pgs. 14 16

19.03 Identify and install a recessed lighting fixture, a fluorescent lighting fixture and a surface lighting fixture according to the specifications, complying with the appropriate local, state or national electric codes.

Electrical Level 2 Module 26203-14 Electrical Lighting: pgs. 9-12, 25-43

of 10

BENCHMARK CODE


19.04 Identify, install and wire a duplex- receptacle-outlet circuit, a split-circuit duplex-receptacle-outlet circuit and a special-purpose receptacle-outlet circuit according to the specifications, complying with the appropriate local, state or national electric codes.

Electrical Level 2 Module 26203-14 Electrical Lighting: pgs. 9-12, 25-43

20.0 Install residential wiring systems--The student will be able to: 20.01 Install and wire a low-voltage signal

system. Electrical Level 1 Module 26111-14 Residential Electrical Systems: pgs. 57-59

20.02 Install conduit systems. Electrical Level 1 Module 26109-14 Conductors and Cables: pgs. 14 19

20.03 Provide power for heating, ventilation and air-conditioning equipment.

Electrical Level 1 Module 26111-14 Residential Electrical Systems: pgs. 59-60

20.04 Install the following, complying with the appropriate local, state or national electric codes:

a. Service-entrance main panel b. Service-entrance meter base c. Alarm system/smoke detectors

Electrical Level 1 Module 26110-14 Basic Electrical Construction Drawings: pg. 35

20.05 Demonstrate knowledge of the requirements for the installation of a swimming-pool electrical system.

Electrical Level 1 Module 26111-14 Residential Electrical Systems: pgs. 61-62

20.06 Connect single-phase and three-phase transformers.

Electrical Level 1 Module 26111-14 Residential Electrical Systems: pg. 15

20.07 Troubleshoot residential electric circuits.

Electrical Level 1 Module 26112-14 Electrical Test Equipment: pgs. 1-9

21.0 Demonstrate proficiency in commercial wiring--The student will be able to: 21.01 Read and interpret a commercial

wiring plan and specifications. Electrical Level 1 Module 26110-14 Basic Electrical Construction Drawings: pgs. 1-7, 29-62

21.02 Draw a commercial electrical-wiring plan.


of 10

BENCHMARK CODE


21.03 Select tools, equipment, materials and wires to complete a job.

This content is discussed, as applicable, throughout the Electrical curriculum.

21.04 Install the following according to the plan and specifications, complying with appropriate electric codes:

a. Wire mold b. Conduit, duct and raceway

systems c. Conductors in a conduit

Electrical Level 1 Module 26108-14 Raceways and Fittings: pgs. 12-13 Module 26109-14 Conductors and Cables: pgs. 14-19

21.05 Describe the difference between a residential and a commercial lighting circuit.

Electrical Level 2 Module 26203-14 Electric Lighting: pgs. 4-48

21.06 Construct control circuits from schematics.


21.07 Describe high-voltage (over 600V) wiring requirements.

Electrical Level 1 Module 26109-14 Conductors and Cables: pgs. 9-10

22.0 Demonstrate specialized electrical skills--The student will be able to: 22.01 Explain solid-state control devices. This content is included in another NCCER course. 22.02 Explain data cable installation

according to the plan and specifications.


A Correlation ofassets.pearsonschool.com/asset_mgr/current/201526/FL_Alignment... · Module...

Documents

Transcript of A Correlation ofassets.pearsonschool.com/asset_mgr/current/201526/FL_Alignment... · Module...