A 5 Catalogue
-
Upload
randhir2981 -
Category
Documents
-
view
105 -
download
4
Transcript of A 5 Catalogue
Hilti TE 7-Acordless rotary hammer
Unbelievable strength, endless versatility.
Hilti. Outperform. Outlast.
Page 5-61
2
3
4
5
6
7
8
9
Page 7-8
Page 9-10
Page 11-12
Page 13
Page 17-18
Page 19
Page 15-16
Page 14
Measuring systems
Drilling and chiselling systems
Diamond cutting systems
Screw fastening systems
Powder-actuated fastening
Anchor systems
Firestop and foam systems
Installation systems
Cutting and sanding systems
Products/Services
3
All roads lead to Hilti
Our dedicated Hilti Team can guide you through our extensive range oftools and consumables. Offering advice and support you can trust; applica-tion training, technical literature; on-site testing and after-sales service.
Hilti customer service – your hotline to Hilti.Quick, easy and toll free 08000 23331
Hilti Customer Service is aquick contact when you wouldlike to arrange a face to facemeeting with your Hilti repre-sentative or when you have aspecific question for our teamof technical specialists. Get intouch with us for:
• Competent advice.• Tenders and quotations.• Answers to questions about prod-
ucts and applications.• Placing orders and obtaining delivery infor-
mation.• Information about availability of individual
Hilti products.• Making suggestions and complaints.• Information on repairs and maintenance.• Information regarding your local Hilti Centre.
Hilti representatives at your service, on the spot.
Should you require professional advice or aproduct demonstration, on a building site, atyour office or in a workshop your Hilti repre-sentative is your face to face contact. Ourfield-based technical sales people or field en-gineers can assist you by:
• Supplying the right Hilti product foreach application.
• Providing professional advice andsales assistance when selecting Hiltiproducts for your individual needs.
• Calculating the most productive orleast expensive solution in each case.
• Offer solutions to identified problemsat your premises or on your jobsite.
• Demonstrating the latest, innovativeHilti products.
Hilti representatives areyour source of professionalknow-how and can facilitateyour success by ensuringthat you are always a stepahead.
4
All roads lead to Hilti
• Advice and assistance with yourpurchases.
• Product demonstrations underconditions close to those met inpractice.
• Assessments and try-outs on allHilti products.
• Minor service/repairs on tools.• Arranging repairs and disposal of
equipment.
At Hilti’s specialisedshops, we display Hiltiproducts in a way thatmakes it quick and easyto find the right productand applicable acces-sories for your specificapplication. Our welltrained staff offer:
Hilti centres - there’s one near you!
Hilti Online
At Hilti we are committed tohelping you save time andmoney. Visit our website for acomprehensive view of ourproducts and services.
• www.za.hilti.com
5
■ Measuring of distances, areas, volume, painters square and more.
■ Measuring to inaccessible points using Pythagoras.
■ Setting out using Tracking.■ Add and Subtract measurements.■ Minimum / Maximum function.■ Saves the last 30 measurements with functions.Measurement range:0.05m up to 200m.0.05m to 100m without target plate.100m to 200m with target plate.Accuracy:Typically +/- 1mm over 200m.
Functions:■ Measuring of distances, areas, volume,
radius, circumference and more.■ Measuring to inaccessible points using
Pythagoras.■ Setting out using Tracking.■ Add and Subtract measurements.■ Minimum / Maximum function.■ Data transfer via bluetooth from PD 38 to PDA.■ Unlimited number of measurement storage.■ Transfer distances to pictures taken.■ Auto CAD function (line draw).■ Transfer measurements to excel spreadsheet.Measurement range:0.05m up to 200m.Accuracy:Typically +/- 1.5mm over 200m.
Functions:■ Setting out drywall tracks.■ Installing out drywall partitions.■ Erecting steel structures.■ Plumb.■ 90 degrees angles.■ Vertical alignment.■ Horisontal alignment.Range:Up to 30m.System Accuracy:3mm over 30m.
Functions:■ Self leveling horisontal line.■ Self leveling vertical line.■ Combination of horisontal and vertical lines.■ Lines can be detected with laser receiver.■ Can be used indoors and outdoors.Range:Up to 30m with PMA 30 Laser Receiver.System Accuracy & exterior app:3mm over 30m.
Application
■ Measuring of distances.■ Setting out via tracking setting.■ Water resistant and Dust tight.Measurement range:0.05m up to 70m for interior and exterior applications.Accuracy:Typically +/- 2mm over 70m.
Functions:■ Combination of PMP 34 and PML 32 - R lasers.■ Horisontal and vertical lines.■ Plumb.■ 90 degrees in both directions.Range:Up to 30m with PMA 30 Laser Receiver.System Accuracy:3mm over 30m.
Product Technical data
PML 32 - R Line Laser
PMP 34 Point Laser
PD 38 / PDARange Meter
PD 40 / PD 42Range Meter
PD 4Range Meter
PMC 36 Combilaser
1
6
Measuring systems
Application Product Technical data
PX 10 Transpointer
PRI 2 Rotating Laser
Functions:■ Excavation work.■ Concrete formwork.■ Landscaping / Slopes.■ Leveling of concrete slabs.Range:Up to 400m radius .System Accuracy:0.05mm at 10m.
Functions:■ Aligning all types of pipes.■ Set out slopes for pipes.■ Remote control up to 60m.Range:Up to 400m.System Accuracy:3mm over the range.
Functions:■ Locate the exit point when drilling through holes.■ Determine the wall thickness.■ No more upside down coring.Range:1 to 135cm.System Accuracy:1mm over the range.
Functions:■ Obtain concrete cover info over large areas for
acceptance inspections.■ Cableless connection between monitor and scanner■ Includes powerful PC software for office analysis and
report creation.■ More than scanner could be used simultaneously.Range:180mm cover.
Functions:■ Suspended ceilings.■ Cladding.■ Façade installation.■ Steel construction.■ Mechanical and electrical installations.■ Formwork.Range:Up to 300m radius .System Accuracy:1mm at 10m.
PR 20 Rotating Laser
PS 200 Ferroscan
PP 11 Pipe Laser
1
Measuring systems
7
4.9 0-400036 Volt power for peak performance
■ Drilling anchor holes in concrete and masonry■ Drilling 4-28mm■ Rec 5-16mm■ Dust removal system■ Chipping function■ Li-ion batteries
720
TE 2 TE 2-M
2,3/2,6 0-4600A special for anchor holes in concrete and masonry
■ Drilling anchor holes in concrete and masonry, 4-12 mm dia. (max. 20 mm)
■ Drilling anchor holes in brittle materials,4-12 mm dia. (max. 20 mm)
■ Drilling through-holes / penetrations in concrete and masonry, 4-12 mm dia. (max. 20 mm) ■ Drilling wood, up to 20 mm dia.■ Drilling solid metal, 3-13 mm dia. and sheet metal
up to 20 mm dia. ■ Driving in and removing screws
TE 6 S DRS 2,8 0-51000-2700
3.8 0-4080
Easy and powerful drilling of anchor holes
■ Drilling anchor holes in concrete, stone and masonry■ Drill bit diameter range: 4 mm to 24 mm (6mm-
14mm optimal in concrete)■ Rec. drill bit diameter range: 5 mm to 12 mm ■ Drilling in wood and steel, using quick release chuck
and cylindrical shank twist drills up to 13 mm dia.■ Srewdriving using a special bit holder■ Dust removal system
The Rotary Hammer for Anchor hole Drilling
■ Drilling anchor holes in concrete and masonry (10mm-20mm optimal in concrete)
■ Drilling in wood and metal■ Driving anchor screws and concrete screws
TE 7-C 3,2 0-4020The Rotary Hammer for Anchor hole Drilling
■ Drilling anchor holes in concrete and masonry
■ Drilling 4-28mm■ Rec 5-16mm■ Dust removal system■ Chipping function
650
TE 2-A
Weight inkg
Blows/min
3,8 includingbattery
0-4410Total Mobility for drilling anchor holes
■ Drilling anchor holes in concrete, stone and masonary.
■ Drill bit diameter 4-16mm dia. (Masonery 4mm-10mm dia).
■ Drilling in wood and steel using a quick release chuck and a TEC adaptor.
■ Screwdriving using a special bit holder.■ Choice of batteries with capacities of 2.0 Ah or
3.0 Ah.
Power inW
400
650
800
720
TE 16
TE 7-A
Technical dataProduct
8
Drilling & chiselling systems
2
TE 16-M 4,05 850 0-4080The Multifunctional Rotary Hammer Drill
■ Drilling anchor holes and through holes in concrete and masonry
■ Mixing materials and paint■ Drilling in wood and metal■ Driving anchor screws and concrete srews■ Light chiseling on masonry and finishing or cleaning
up on concrete
TE 40 5,5The universal combihammer
■ Drilling anchor holes in concrete and masonary.■ Optimal diameter of 16mm.■ Drilling range 4-24mm.■ Drilling into wood and steel using a quick release chuck.
Product Technical data Weight inkg
1010
Power inW
0-3180
TE 56TE 56-ATC
5,9The convenient lightweight
■ Hammer drilling in concrete and masonry with carbide tipped drill bits, 12-40 mm dia (16mm-22mm optimum).
■ Hammer drilling in concrete with breach bits, 40-80 mm dia.■ Hammer drilling in masonry with percussion core bits,
40-150 mm dia.■ Chiselling using pointed, flat, wide flat, hollow, channel, round
and mortar chisels and bushing tools
1100 0-2880
TE 76 TE 76-ATC
7/7,9Mega power with revolutionary operator protection
■ Hammer drilling in concrete and masonry with carbide tipped drill bits, 12-40 mm dia (22mm- 40mm optimum).
■ Hammer drilling in concrete and masonry with breach bits, 45-80 mm dia.
■ Hammer drilling in concrete and masonry with percussion core bits, 45-150 mm dia.
■ Chiselling using pointed, flat, wide flat, hollow, channel, round and mortar chisels and bushing tools
■ ATC (Active Torque Control) version available
1300 0-2770
TE 706TE 706-AVR
7,2For top chiselling performance
■ Medium to heavy-duty chiseling applications including breach-es, demolition and corrective work, mainly on walls. Ideal for use in renovation and the plumbing trade
■ Chiseling openings <20x20> cm forpipes and cable trays■ Chiseling openings <20x20> cm for windows and doors■ Removing plaster and rendering■ AVR (Active Vibration Reduction)
1200 2290/2590/2760
TE 905-AVR 11,3The gentle giant
■ Removal and demolition work with concrete, masonry, stone and asphalt
■ Chiseling performance for a breach in medium-hard concrete approx. 1300 cm3/min
■ Vibration reduction of about 50% by revolutionary AVR system (intergrated vibration damping)
1600 0-2200
Blows/min
2
Drilling & chiselling systems
9
Corebits DD-BL Dia. 25-400 mm
■ Making breaches for supply and disposal lines.■ Making breaches for fresh and exhaust air ducts■ Drilling perforations■ Drilling holes for house/building supply lines■ Removing test cores
DD-BI corebitsAnchor holes in concrete (wet)8-42 mm dia. (hand held)8-87 mm dia. (using the drill stand)DD-BI corebitsPenetration in masonry (dry)16-162 mm dia.
DD 100 MEC Hand held coring machinePower input:1700 WWeight 6,2 kg
■ Wet drilling in concrete (8-42 mm dia.)hand held(using the water swivel)
■ Dry drilling inmasonry (16-162 mmdia.) hand held(Using the extraction head)
DD-BI corebitsConcrete (wet)12-62 mm dia. (hand held)12-152 mm dia. (using the drill stand)Penetration in masonry (dry)16-162 mm dia.
DD 130 Hand held coring machineRig mounted coring rigPower input:1900 WWeight 7,7 kgRig 13 kg
■ Wet drilling in concrete (12-62 mm dia.)hand held(12-152 mm using drill stand)
■ Dry drilling inmasonry (16-162 mmdia.) hand held
■ Core bit change systemrequiring no tool
■ Four speeds■ Mechanical safety (slip)
clutch■ Oil lubrication with
circulation pump■ Electronic speed
stabiliser■ Electronic starting
current regulator■ Electronic overland
protector■ Service indicator■ Automatic cut-out brushes
■ Very high cuttingperformance withspecially designeddiamond dics
■ Almost dustlesssitting operation with VCU40 vacuum cleaner
■ Slit depth, can beadjusted easily,precisely andsecurely
DD 200Diamond drilling systemsRig mounted coring machineNominal power: 2600 WWeight 46 kg including stand
■ Slitting tool for installing electric cables andconduits on concrete, sand-lime block, etc.
■ Simultaneously cutting of two slits in one operation■ Chase up to 46mm wide and 40mm deep
DC-SE 20 Slitting toolNominal power: 1950WWeight: 5,6 kg
■ Smart power■ 120/85 cutting depths■ Diamond blades
300/230mm
■ Can be used to cut reinforced concrete, granitecurbstones, slabs, brick and masonry blocks.
■ Accessories available
DCH 300/230 Nominal power: 2600W
Product Technical data Features/Benefits
10
Diamond & cutting systems
3
Product
Diamond Cutting Disks (125mm and 230mm diameter)C1 Concrete / Cement ProductsC2 Concrete / Hard AggregatesM1 Masonry Sand lime blocksM2 Bricks / TilesU10 UniversalT10 Tiles
Abrasive Cutting & Grinding disks115mm Steel cutting disk115mm Grinding disk230mm Steel cutting disk230mm Masonary cutting disk230mm Grinding diskVarious specification 350mm & 400mm discs
DCG 125-S
DC 230-S
AG 230-S
AG 125-S
DAG 115
Max. disc diameter: 125 mmSpeed: 11000 r.p.m.Power input: 1400 wWeight: 1.9 kgSpindle thread connection: M 14Cutting depth: approx. 30 mmFor stone/concrete cuttingSmart power Anti kick back
Max. disc diameter: 230 mmSpeed: 6500 r.p.m.Power input: 2100 wWeight: 4,3 kgSpindle thread connection: M 14Cutting depth: approx. 60 mmFor stell cutting & grinding
Max. disc diameter: 115 mmSpeed: 11000 r.p.m.Power input: 670 wFor steel cutting & grinding
Max. disc diameter: 125 mmSpeed: 11000 r.p.m.Power input: 1020 wWeight: 1.6 kgSpindle thread connection: M 14Cutting depth: approx. 30 mmFor steel cutting & grinding
Max. disc diameter: 230 mmSpeed: 6500 r.p.m.Power input: 2500 wWeight DC 230S: 5,1 kgWeight DC 230S-EX: 6.0 kgSpindle thread connection: M 14Cutting depth: DC 230S-EX: approx. 65 mmCutting depth: DC 230S-EX up to 60 mm adjustable in 5 mm increments without toolFor stone/concrete cutting & grinding
Application Technical data
3
Diamond & cutting systems
11
SF 121-A cordless screwdriver(2.0Ah)(3.0Ah)
SD 5000 high performance drywall screwdriver
SD 5000Nominal power: 710 WNo load speed: 0-5000 r.p.m.Max. torque: 9.5 NmWeight: 1,4 kg
SMD 57 screw magazine
SMD 57Weight: 0,33 kgLength: 180 mmLength incl. SD5000: 410 mmScrewdriving depth: steplessly adjustableContact pressure: up to 45N (4,5 kp) Suitable drywall screws (length): 9-57 mm
Power: 2.0 Ah on 12 V = 24 Wh3.0 Ah on 12 V = 36 Wh
1st speed: 0 - 400 r.p.m.2nd speed: 0 - 1300 r.p.m.Max. torque: (flexible screw fastening in wood); 25 NmTorque regulation: 1.5 Nm - 10 Nm in 15 incrementsChuck range: 1.5-13 mmWeight incl. battery and chuck 1.95 kg
SF 151-A cordless screwdriver(2.0Ah)(3.0 Ah)
Power: 3.0 Ah on 15.6 V = 46.8 Wh
1st speed: 0 - 450 r.p.m.2nd speed: 0 - 1450 r.p.m.Torque settings: 2.0-12 Nm in 15 incrementsMax. torque: (screws in hard material) 34 NmChuck range: 1.5-13 mmWeight: 2.18 kg
UH 650-Universal hammer drill Power: 650 W (230 V)
Speed under no load:1st gear: 0-1100rpm2nd gear: 0-2900rpmMax. torque: 30 NmWeight: 2.3 kg
Hammer dilling in masonry: (never concrete)Drill bits with smooth shanks 3-16mm dia.Rotary drilling in steel/metal:Drill bits with smooth shanks 1.5-13mm dia.Rotary drilling in softwood:Rotary drilling in hardwood:
Application Product Technical data
Constant-on switch: YesPower 450WMax. speed no load 4000rpmMax. torque: 7 NmReversing switch: YesSupply cord length: 5 mWeight: 1.3 kg
SF 4000
12
Screw fastening systems
4
Voltage/battery capacity: 14.4 V/2.6 AH Li-ionNo load speed (gears): 350/1360/1900U/min. (3)Max. screwdriving torque-soft joint/hard joint: 33/70 NmTorque regulation: 2 to 12 Nm in 15 stepsKeyless chuck: Tungsten carbide jaws, 1.5 to 13mmWeight (incl. battery and chuck): 2.4kg Hammering speed (rpm) 34200
Power: 14.4 v Li-ionImpact frequecy: 2700 / minWeight: 1.6Torque: 140NmChuck: 1/2” socket
Nominal power: 470 wattTorque: 100NmSpeed: 0-2200 R.P.MWeight: 2.5KgChuck: 1/2” socket
Application Product Technical data
Constant-on switch: YesPower 600WMax. torque: 9NmNo load speed: 0 - 2200 rpmReversing switch: YesSupply cord length: 4 mVariable speed switch: YesWeight: 1.5 kg
SFH 144
SIW 144
SI 100
ST 2500
ST 1800 Screwdriver for metal construction
Nominal power: 600 WNo load speed: 0-1900 r.p.m.Torque range: 1-22 NmWeight: 1,8 kg
4
Screw fastening systems
13
The X-BT system consists of X-BT4000-A battery operated drill. DX 351BT/BTG powder-actuated tool and X-BTfasteners.Uses: X-BT is an innovative way of fastening topre-painted steel without damaging the surface.X-BT is designed to work on construction steelsas thin as 8mm without through-penetration.
Weight: 2.95 kgLength: 397 mmCartridge: 6.8 / 11MUses: Fully automatic universal tool. Making uni-versal fastenings in concrete, brick and steel fornails/studs up to 47mm length.
Weight: 3.53 kgLength: 460 mmCartridge: 6.8 / 11MUses: Fully automatic tool for repetitive fasten-ings to steel, concrete and sand stone with col-lated nails up to 72mm.
Weight: 4.75 kgLength: 400 mmCartridge: 6.8 / 11MUses: Fully automatic tool for marking and iden-tification stamping. Stamping on finished/semi-finished metal and castings.
Weight: 4.05 kgLength: 400 mmCartridge: 6.8 / 11MUses: Fully automatic tool for marking and iden-tification stamping. Stamping on cold metal andcastings.
Weight: 2.95 kgLength: 397 mmCartridge: 6.8 / 11 M
Uses: Fully automatic universal tool for fixinggrating & floor traps
DX 460
Weight: 3.83 kgLength: 452 mmCartridge: 6.8 / 18 MUses: Approved method of fastening profile metalsheets to steel substructures. The approval covers thecoordinated system of components consisting of the6.8/18M cartridge, X-ENP nail for profile metal sheetsand the DX76 powder-actuated fastening tool.
Weight: 2.4 kgLength: 370 mmCartridge: 6.8 / 11 MUses: A modern tool having sophisticated technologicalfeatures for economical repetitive fastening.
Weight:Length: 932 mmCartridge:Uses: Fast installation in masonary/concrete of:X-EKS Conduit clips, X-ET Trucking fasteners,X-HS M8 rod hangers, X-FB Metal Coduit clips,X-ECT Cable Tie fastener, X-DFB Double Con-duit clips, X-EKSC Closed snap-in conduit clip
DX 36 M
Application Product Technical data
E
X-BT system
DX 76 F15
DX 460 GR
DX 462CM
DX 462HM
DX 460 MX 72
3.8 kg
Gas can
14
Powder-actuated systems
5
■ Ripping, cross-cutting and mitre cuts■ Cut-outs in kitchen work tops■ Cutting panelled ceiling edge gaps■ Square-edging of rough planks
■ Ripping, cross-cutting and mitre cuts■ Cut-outs in kitchen work tops■ Cutting panelled ceiling edge gaps■ Square-edging of rough planks■ Cutting boards in timber yards or for concrete forming
■ On flat and curved surfaces where a high rate of removal isrequired
■ Fine surface finishing
For sanding■ Softwood and hardwood■ All wood materials■ Paint and varnish■ Hardened filler
■ On flat and curved surfaces where a high rate of removal is required
■ Fine surface finishing
For sanding■ Softwood and hardwood■ All wood materials■ Paint and varnish■ Hardened filler
Suitable for everyday uses on sites for: ■ Curved cuts■ Mitre and bevel cuts up to 45°■ Precise square cuts■ Cutting close to edges■ Cut-outs, cutting from the underside
WSR 1400-PE Reciprocating saw
■ Sheet metal, stainless steel, aluminium■ Softwood / hardwood, square timber,
nail-ridden wood■ Plastic materials■ Composites■ Gas concrete■ Drywall / gypsum panels■ Forming boardsTechnical dataPower input: 1400 WNo-load stroke rate: 0–2700 st./min.Stroke length: 32 mmWeight: 4.5 kg
Application Product Features/Benefits
WSC 255-KE Power input 1300 W Cutting depth 0-55 mmWeight 4.3 kg
WSC 85 Power input 1800 W Cutting depth 0-85 mmWeight 7 kg
WFE 450 Power input 450 W Sanding plate 150 dia.Weight 2.1 kg
WFO 280 Power input 350 W Sanding plate dimensions 223x112mmWeight 2.8 kg
WSJ 750-ETPower input 750 W Weight 2.6 kg
6
Cutting & sanding systems
15
sodfm,ev iJdjfiwhriuh. NöoWE�
Z8Z�23awöp3i4eß0288u27�uze�
4i5kirdwiloi4jtf-öx-.vbvbvh, ireiv�
u9+ß12oeoo
CP 656 Brandschutzstopfen
sodfm,ev iJdjfiwhriuh. NöoWE
Z8Z�23awöp3i4eß0288u27�
4i5kirdwiloi4jtf-öx-.vbvbvh, ire
u9+ß12oeoo
CP 655 Brandschutzste
sodfm,ev iJdjfiwhriuh. NöoWE�Z8Z�23awöp3i4eß0288u27�uze�4i5kirdwiloi4jtf-öx-.vbvbvh, ireiv�u9+ß12oeoo
CP 636 Brandschutzmörtel
sodfm,ev iJdjfiwhriuh. NöoWE�
Z8Z�23awöp3i4eß0288u27�uze�
4i5kirdwiloi4jtf-öx-.vbvbvh, ireiv�
u9+ß12oeoo
CP 671 Brandschutzbeschichtung
sodfm,ev iJdjfiwhriuh. NöoWE�
Z8Z�23awöp3i4eß0288u27�uze�
4i5kirdwiloi4jtf-öx-.vbvbvh, ireiv�
u9+ß12oeoo
CP 611 A Brandschutzmasse
iJdjfiwhriuh. NöoWE�
4eß0288u27�uze�
bvh, ireiv�
CP 642 Brandschutzmansch.
Bui
ldin
g jo
ints
Sea
ling
pip
e p
enet
ratio
nsS
ealin
g ca
ble
/p
ipe
pen
etra
tions
Sea
ling
of c
able
pen
etra
tions
Fiel
d o
f ap
plic
atio
n
■ Passive fire prevention■ Fire rated closing of openings
with approval systems fromHilti
CP 656Firestop plug
CP 657Firestop brick
CP 620Expanding fire seal
CP 636Firestop mortar
CP 670Firestop coating
CP 611-AIntumescentFirestop mastic
CP 643Firestop jacket
CP 601-SElasticfirestop sealant
■ Temporary closing of penetrations coredduring construction
■ Sealing individual cables and bunched cables in small breaches
■ Quick and clean installation
■ No forms required when built in floor
■ Quick and cleaninstallation
■ One solution for variousopenings■ Ideal for difficult to reachopenings■ Impervious to smoke
■ Very good integrity / fire rating
■ Excellent working properties due to adjustable consistency;Can be pumped
■ Approved, also for light partitions walls / drywalls,
■ Single coat
■ Broad range of applications
■ Water based; easy to clean up
■ Quick and reliable closing with “click” connection
■ Highly flexible when cured
■ Water and gas tight
■ Bunched cables and cable runs / trays in medium sized penetrations
■ Temporary or permanent sealing of openingsduring construction
■ Up to six times expansion■ Repenatrable■ Cures within 1 minute
■ Cable runs / trays in large openings
■ Closing of large openings
■ Cable runs / trays in large openings
■ Cable coating to delay the spread of fire
■ Single cables and bunched cables in small penetrations
■ Plastic pipes up to 50 mm dia.
■ Metal pipes
■ Plastic pipes with diameters up to 250 mm
■ Expansion joints and connec-tion joints subjected to expansion in fire rated walls and floors
■ Metal pipes
Application Hilti Solution Features/BenefitsTechnical data
16
Firestop & foam systems
7
■ Insulation and filling ■ Foam yield up to 50 litres■ Work breaks possible■ Application with dispensing gun■ No CFC’s■ Building material class B2, DIN 4102■ Approval for mining uses tamping and sealing
■ Dispenser for filling and insulating with CF 125-50 foams
■ Precise application and easy working■ Important! Once used, always leave the foam
can on the dispenser■ Clean dispenser internally with CFR 1 every
3 months at the most
■ Filling and insulation ■ Foam yield 45 litres■ No CFC’s■ May be applied using the CF-FA1finger
adaptor
■ Finger adaptor for CF116 foams ■ Precision plastic valve
■ Cleaner for CF-DS1■ Spray clean non-cured foam
Product
CF 125-50
CF-DS1 dispenser
CF 116-45
CF-FA1
CFR1 cleaner
Features/Benefits
7
Firestop & foam systems
17
Base Material■ Concrete, in the tension or compression zone ■ Hard natural stoneUse■ Fastening through in-place parts e.g. angles
Tracks, channels, machines, wooden beams etc.Material■ Steel, galvanised by 5 microns■ A4 stainless steel (material 1,4401 / AISI 316)Features■ A safety wedge sleeve for reliable anchoring and
certain follow up expansion■ Short and simple setting operations■ Fire resistance
A stud anchor for different anchorage depths■ Small anchorage depth for low tensile loads;
large anchorage depth for high tensile loadsBase Material■ Concrete, in the compression zoneUse■ Versatile fastening through in place parts like wood
beams, metal sections, columns, brackets etc.Features■ Two anchorage depths for optimised use and high
efficiency■ Safety from blue ring indicating large anchorage depth■ Special uses permitted by a long thread e.g.
stand-off fastenings
Base Material■ Concrete■ Hard natural stoneUse■ For the medium load range; fastenings with bolts and
threaded rods for plumbing; heating, air- conditioning and ventilation installations, pipe suspension, air ducts etc. forsecuring channels, rails, plates, brackets and suspended ceilings
Material■ Bright galvanised steel
Base Material■ Solid materials: concrete, bricks, sand lime blocks,
P4.6 lightweight concrete■ Hollow materials: Bricks, sand lime blocks, cement
ceilings slabs, lightweight concrete blocksUse■ Fastening pipes and cables, wood battens and
components for electrical and pipefitting / plumbing installations
Material■ High grade polyamide plastic
Galvanised, steel drive screw, also available in A2stainless steel (material 14303 / AISI 304
Base Material■ Concrete, solid bricks, sand-lime blocksUse■ Fastening through in place parts e.g. handrails,
angles, brackets, timber partsMaterial■ Steel galvanised to 5 micronsFeatures■ Bridging of gaps■ Wide range of applications in concrete,
bricks etc.
Base Material■ Concrete■ Hard natural stoneUse■ Heavy duty fastening with small spacing and
edge distancesSystem■ Consisting of adhesive in a foil capsule and an
anchor rod or internally threaded sleeveFeatures■ A strong foil capsule, adapts flexibility to fit in
irregular holes. Capsules don’t drop out of overhead holes
tension:from 5 to 29,5 kNshear:from 5,5 to 35,3 kN
tension:from 3,2 to 21 kNshear:from 2,4 to 20,5 kN
tension:from 1,9 to 8 kNshear:from 2,4 to 14,5 kN
tension:from 1,5 to 5,0 kNshear:from 1,5 to 5,6 kN
tension:from 0,05 to 0,4 kNshear:from 0,15 to 0,5 kN
tension:from 1,7 to 8,0 kNshear:from 2,4 to 12,7 kN
tension:from 10,9 to 194,1 kNshear:from 2,2 to 43,4 kN(solid brick)
HST Stud anchorrange: from M8 to M24 dia.
A4316
HSA Stud anchorrange: from M6 to M20 dia.
A4316
HKV/HKDrange: from M6 to M20 dia.
HPS-1 Impact anchorrange: from 4 to 8 mm
A4316
HLC Sleeve anchorsFor general medium duty fastenings range from M6 to M20
HVU Adhesive anchor range M8 to M39
A2304
Application Anchor type Diameter Technical data Guide load
18
Anchor systems
8
■ Fastening without expansionpressure
■ Versatile■ User friendly■ A complete system of
matched component
Hilti HIT-HY:the innovative injection techniqueType of support
Concrete Solid brick Hollow brick
Hilti HIT-RE 500 for rebar fastenings
Hilti HIT-HY 150 for concrete, natural stone and brickwork
Hilti HIT-HY 70 for hollow brick Hilti HFX for everyday concrete,masonary & natural stone fixing
Hilti HIT-HY 150
Hilti HY 70
Type of cartridge
MD 2000Manual dispenser
MD 2000 Kit complete set
HAS
HIS-N
HIT-IG
HIT-AM
HIT-S
A4316
8
Anchor systems
19
MP pipe rings with acoustic insulation
MP-HI
MP-SP
ML-C-30ML-C-20
■ Heating■ Plumbing■ Air-conditioning■ Ventilation■ Acoustic and thermal
insulation
■ Band hanger forsprinklers pipe rings
■ Quick locking systemswith 3 stage safetyclosure
■ Screw with combinationcross recess, securedagainst loss
■ Heating■ Plumbing■ Air-conditioning■ Industrial electrical
and pipinginstallation
MQ-41DMQ-41
■ Heating■ Plumbing■ Air-conditioning■ Industrial electrical
and pipinginstallation
Simple, compact and time saving ■ Racking systems
ON SPECIAL REQUEST
ON SPECIAL REQUEST
Application Product Trade
20
Installation systems
9
Hilti LifetimeServiceHilti Lifetime
ServiceHilti LifetimeService
Hilti LifetimeService
Hilti tools last.Our service too.First-class service for all Hilti tools.NO
COSTS
MANUFACTURERSWARRANTY
REPAIRCOST LIMIT
LIFETIMESERVICE
1Yearup to
LifetimeLifetime
The main advantages of Hilti Lifetime Service are• Maximum cost control
– Absolutely no costs for up to 1 year– A clear repair cost limit thereafter
• Quick, straightforward procedure– The annoying and time-consuming process of obtaining cost estimates
becomes a thing of the past.
Hilti. Outperform. Outlast. Toll Free: 08000 23331Hilti (South Africa) (Pty) Ltd I 72 Gazelle Avenue I Corporate Park I Midrand I T(011) 237 3000 Toll Free Fax 08000 119390 I www.za.hilti.com
Hilti Fleet Management
Does this sound familiar?
• I know how many vehicles, compressors or generators I have and
how much they cost per month. But how about my power tools?
• My work progress is often subject to expensive delays due
to power tool breakdowns
• I really do not know what I pay for repairs, but I’m sure it’s a small
fortune and always unplanned
• The current condition of my power tools is unknown to me, which
makes me concerned about productivity and safety
• I want my people to focus on their job and not on administrative
tasks
• I pay everything upfront, but I do not get paid until three months
later
Hilti Fleet Management
Start the program with tools you need right now and add more tools at any time you want. One monthly invoice covers absolutely all toolrelated costs, including tool usage, repairs and customized services.Each tool will be replaced at the right time (after 12–36 months) withthe latest generation.
We have the solution for you!Hilti Fleet Management
Always modern tools without any upfront investment
• Pay a monthly fee and get a whole new fleet
of tools
• All tools are regularly renewed to eliminate
costly downtimes and ensure latest safety
standards
• Fixed monthly fees make budgeting and cost
allocation easy
• Add new tools anytime quickly and easily
Innovative tool management reduces costs by up to 50%
• Guaranteed no additional costs for repair
or replacement for up to 3 years
• Elimination of administrative work related
to tool purchasing, repair quotations and
accounting
• Clear tool assignment to employees, cost
centres or job-sites, gives you more control
and reduces unnecessary purchasing
Customized services for more productivity and flexibility
• Tool tracking – efficient tool management
• Loan tools – keeps you always productive
in the event of a breakdown
No Cost repairs
Up to 1 year
Up to 3 years
Hilti Lifetime Service
Hilti Fleet Management
Hilti Fleet Management
Get started right away.Hilti high performance power tools plus the top service in the construction industry.
Hilti presents you a trade-specific selection of tools. Feel free to evaluate our offer and
tailor the tools according to your needs. All tools are available under the Hilti Fleet
Management program. Once you get started, you can easily add tools anytime.
All inclusive:
� Tool usage � Tool tracking
� Tool repair � Pick up and delivery
� Monthly invoicing � Loan tools
For a convenient supply of consumables, please contact your: Account Manager
Hilti Centre or
Customer Call Centre 08000 23331
Building construction
1 Hilti TE 905 AVR breaker
1 Hilti TE 76 combi hammer
1 Hilti DC 230-S angle grinder
1 Hilti TE 16-M rotary hammer
1 Hilti DX 460 powder actuated fastening tool
1 Hilti WSC 85
1 Hilti PR 20 rotating laser
7 tools Monthly fee: R3,510*
Steel and Metal
1 Hilti DC125-S angle grinder
1 Hilti SF 151-A 3.0 Ah battery screwdriver
1 Hilti SR 16 power drill
1 Hilti TE 76 combi hammer
1 Hilti DC 230-S angle grinder
1 Hilti PD 32 laser range meter
6 tools Monthly fee: R1,854*
Mechanical /Electrical
1 Hilti TE 706 AVR breaker
1 Hilti TE 56 combi hammer
1 Hilti GX 100-E gas system
1 Hilti SF 151-A 3.0 Ah battery screwdriver
1 Hilti TE 6-S rotary hammer
1 Hilti DC 125-S angle grinder
1 Hilti PD 30 laser range meter
7 tools Monthly fee: R2,605*
Interior finishing
1 Hilti SF 4000 drywall screwdriver
1 Hilti DX460 powder actuated fastening tool
1 Hilti TE 2 rotary hammer
1 Hilti WSJ 750-EB jig saw
1 Hilti PD 30 laser range meter
1 Hilti PR 16 rotating laser
6 tools Monthly fee: R1,942*
* Prices are subject to change
Hilti. Outperform. Outlast. Toll Free: 08000 23331Hilti (South Africa) (Pty) Ltd I 72 Gazelle Avenue I Corporate Park I Midrand I T(011) 237 3000 Toll Free Fax 08000 119390 I www.za.hilti.com
Hilti centres - there’s one near you!
Centres
Bloemfontein120a Nelson Mandela DriveCity CentreWestdene, BloemfonteinContact No: 082 645 0458Tel: (051) 430 3714 / Fax: (051) 430 4188Toll Free: 08000 23331
Cape Town - Kenilworth321 Main Road KenilworthContact No: 083 678 9055Tel: (021) 761 3650 / Fax: (021) 761 3654Toll Free: 08000 23331
Cape Town - MilnertonMarconi CentreKoeberg RoadMilnerton, Cape TownContact No: 083 645 0456Tel: (021) 551 8606 / Fax: (021) 551 8605Toll Free: 08000 23331
Durban2 Intersite Avenue6a Umgeni Business CentreUmgeni Business Park, DurbanContact No: 082 886 5857 Farhaad 082 941 5127Fax: (031) 263 1908Toll Free: 08000 23331
East London17 Bowls RoadArcadia East LondonContact No: 082 941 5120Tel: (043) 743 6382 / Fax: (043) 722 7723Toll Free: 08000 23331
Eco-Park - CenturionEco Decor Shop 15B300 Witch Hazel StreetHighveld Park Ext 69 CenturionContact No: 083 645 0465Tel: (012) 661 3936 / Fax: (012) 661 3935Toll Free: 08000 23331
GeorgeShop 2 Bloemhof CentreYork StreetGeorgeContact No: 078 802 8396Tel: (044) 874 4279 / Fax: (044) 874 6027Toll Free: 08000 23331
HillfoxShop 23Hillfox Power CentreCnr Hendrick Potgieter & Alberts StWeltevreden ParkContact No: 083 645 0462Tel: (011) 475 8792 / Fax: (011) 475 8392Toll Free: 08000 23331
MeadowdaleC/R Hyperama Superlink & Herman StreetsShop 05A, Value CentreMeadowdaleContact No: 083 678 9067Tel: (011) 454 6020 / Fax: (011) 454 6021Toll Free: 08000 23331
Nelspruit10 Silvia StreetNelspruitContact No: 078 802 8395Toll Free: 08000 23331
Pietermaritzburg332 Boom StreetPietermaritzburgContct No: 083 669 8139Toll Free: 08000 23331
Port Elizabeth28 West StreetNewton Park, Port ElizabethContact No: 078 800 3087 (Ylando)078 802 8390 (Bramley)Tel: (041) 364 3201 / Fax: (041) 364 3279Toll Free: 08000 23331
Richards Bay83 Bullion BoulevardRichards BayContact No: 078 802 8392Tel: (035) 789 4861 / Fax: (035) 789 4861Toll Free: 08000 23331
SandtonUnit 2 Cnr Katherine &Grayston Drive Sandton 2146Contact No: 011 262 3740Toll Free: 08000 23331