9W2TM type Splash Proof Centrifugal Fan
8
Splash Proof Centrifugal Fan 9W2TM type ø 100 × 25 mm ■ Specifications When the optional inlet nozzle (109-1080H) is mounted. ■ Common Specifications ■ Features The models listed below have pulse sensors with PWM control function. Model no. Rated voltage [V] Operating voltage range [V] PWM duty cycle* [%] Rated current [A] Rated input [W] Rated speed [min -1 ] Max. airflow [m 3 /min] [CFM] Max. static pressure [Pa] [inchH2O] SPL [dB(A)] Operating temperature [°C] Expected life [h] 9W2TM24P4G001 24 18 to 27.6 100 0.7 16.8 7400 2.03 71.7 708 2.84 65 -20 to +70 40000/60°C (70000/40°C) 20 0.04 0.96 1500 0.39 14 30 0.12 31 9W2TM24P4H001 100 0.44 10.56 6400 1.77 62.5 560 2.25 60 20 0.04 0.96 1500 0.39 14 30 0.12 31 9W2TM48P4G001 48 36 to 60 100 0.35 16.8 7400 2.03 71.7 708 2.84 65 20 0.04 1.92 1500 0.39 14 30 0.12 31 9W2TM48P4H001 100 0.22 10.56 6400 1.77 62.5 560 2.25 60 20 0.04 1.92 1500 0.39 14 30 0.12 31 * PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%. □ Material Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0) □ Expected life Refer to specifications (L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage) Expected life at 40°C is for reference only. □ Motor protection function Locked rotor burnout protection, Reverse polarity protection □ Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case) □ Insulation resistance 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case) □ Sound pressure level (SPL) At 1 m away from the air inlet □ Operating temperature Refer to specifications (Non-condensing) □ Storage temperature -30 to +70°C (Non-condensing) □ Lead wire ＋ Red Black Sensor Yellow Control Brown □ Mass 190 g □ Ingress protection IP68 Water and Dust Protection Its IP68-rated (1) water and dust protection, which is improved compared with that of our current model, ensures stable fan operation even in harsh environments. (2) High Airflow and High Static Pressure This fan delivers a maximum airflow of 2.03 m 3 /min and a maximum static pressure of 708 Pa. (3) Low Noise and High Energy Efficiency The PWM control function enables the control of fan speed, contributing to lowering noise and improving energy efficiency of devices. (1) The degree of protection (IP code) is defined by IEC 60529 (International Electrotechnical Commission) as follows. (2) Current model: San Ace 100W 9W1TM type ø 100 × 25 mm Splash Proof Centrifugal Fan (3) For models 9W2TM24P4G001 and 9W2TM48P4G001
Transcript of 9W2TM type Splash Proof Centrifugal Fan
Splash Proof Centrifugal Fan9W2TM type
ø100× 25 mm
■ Specifications When the optional inlet nozzle (109-1080H) is mounted.
■ Common Specifications
■ Features
The models listed below have pulse sensors with PWM control function.
Model no.Rated voltage
[V]
Operatingvoltage range
[V]
PWMduty cycle*
[%]
Rated current[A]
Rated input[W]
Rated speed[min-1]
Max. airflow[m3/min] [CFM]
Max. static pressure [Pa] [inchH2O]
SPL[dB(A)]
Operatingtemperature
[°C]
Expectedlife[h]
9W2TM24P4G001
24 18 to 27.6
100 0.7 16.8 7400 2.03 71.7 708 2.84 65
-20 to +70 40000/60°C(70000/40°C)
20 0.04 0.96 1500 0.39 14 30 0.12 31
9W2TM24P4H001100 0.44 10.56 6400 1.77 62.5 560 2.25 60
20 0.04 0.96 1500 0.39 14 30 0.12 31
9W2TM48P4G001
48 36 to 60
100 0.35 16.8 7400 2.03 71.7 708 2.84 65
20 0.04 1.92 1500 0.39 14 30 0.12 31
9W2TM48P4H001100 0.22 10.56 6400 1.77 62.5 560 2.25 60
20 0.04 1.92 1500 0.39 14 30 0.12 31
* PWM input frequency is 25 kHz; models without specifications at 0% PWM duty cycle have zero fan speed at 0%.
□ Material Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
□ Expected life Refer to specifications(L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)Expected life at 40°C is for reference only.
□ Motor protection function Locked rotor burnout protection, Reverse polarity protection
□ Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
□ Insulation resistance 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
□ Sound pressure level (SPL) At 1 m away from the air inlet
□ Operating temperature Refer to specifications (Non-condensing)
□ Storage temperature -30 to +70°C (Non-condensing)
□ Lead wire ＋ Red Black Sensor Yellow Control Brown
□ Mass 190 g
□ Ingress protection IP68
Water and Dust ProtectionIts IP68-rated(1) water and dust protection, which is improved compared with that of our current model, ensures stable fan operation even in harsh environments.(2)
High Airflow and High Static PressureThis fan delivers a maximum airflow of 2.03 m3/min and a maximum static pressure of 708 Pa.(3)
Low Noise and High Energy EfficiencyThe PWM control function enables the control of fan speed, contributing to lowering noise and improving energy efficiency of devices.
(1) The degree of protection (IP code) is defined by IEC 60529 (International Electrotechnical Commission) as follows.
(2) Current model: San Ace 100W 9W1TM type ø100 × 25 mm Splash Proof Centrifugal Fan
(3) For models 9W2TM24P4G001 and 9W2TM48P4G001
■Airflow - Static Pressure Characteristics・ PWM duty cycle ・ Operating voltage range
1.50 0.5 1.0 2.0
100
200
300
500
400
600
2.5
700
800
0 5040302010 60 70 80
0
0.5
1.0
1.5
2.0
2.5
3.0
1.50 0.5 1.0 2.0
100
200
300
500
400
600
2.5
700
800
0 5040302010 60 70 80
0
0.5
1.0
1.5
2.0
2.5
3.0
0
400
300
200
100
0.5 1.0 2.01.5
600
500
0 5040302010 60 70
0
0.5
1.0
1.5
2.0
0
400
300
200
100
0.5 1.0 2.01.5
600
500
0 5040302010 60 70
0
0.5
1.0
1.5
2.0
1.50 0.5 1.0 2.0
100
200
300
500
400
600
2.5
700
800
0 5040302010 60 70 80
0
0.5
1.0
1.5
2.0
2.5
3.0
1.50 0.5 1.0 2.0
100
200
300
500
400
600
2.5
700
800
0 5040302010 60 70 80
0
0.5
1.0
1.5
2.0
2.5
3.0
0
400
300
200
100
0.5 1.0 2.01.5
600
500
0 5040302010 60 70
0
0.5
1.0
1.5
2.0
0
400
300
200
100
0.5 1.0 2.01.5
600
500
0 5040302010 60 70
0
0.5
1.0
1.5
2.0
24 VDC
Airflow
(Pa)(inch H2O)
9W2TM24P4G001
Airflow
(Pa)(inch H2O)
9W2TM24P4G001
Airflow
(Pa)(inch H2O)
9W2TM24P4H001
Airflow
(Pa)(inch H2O)
9W2TM24P4H001
PWM duty cycle 100%
PWM duty cycle 100%24 VDC
Airflow
(Pa)(inch H2O)
9W2TM48P4G001
Airflow
(Pa)(inch H2O)
9W2TM48P4G001
Airflow
(Pa)(inch H2O)
9W2TM48P4H001
Airflow
(Pa)(inch H2O)
9W2TM48P4H001
PWM duty cycle 100%
PWM duty cycle 100%
48 VDC
48 VDC
(CFM)
(m3/min)
Sta
tic
pre
ssu
re
Sta
tic
pre
ssu
re
(CFM)
(m3/min)
Sta
tic
pre
ssu
re
Sta
tic
pre
ssu
re
(CFM)
(m3/min)
Sta
tic
pre
ssu
re
Sta
tic
pre
ssu
re
(CFM)
(m3/min)
Sta
tic
pre
ssu
re
Sta
tic
pre
ssu
re
(CFM)
(m3/min)
(CFM)
(m3/min)
(CFM)
(m3/min)
(CFM)
(m3/min)
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
27.6 V
24 V
18 V
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
27.6 V
24 V
18 V
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
60 V
48 V
36 V
60 V
48 V
36 V
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
■ PWM Duty - Speed Characteristics Example
1000
2000
3000
4000
5000
6000
7000
8000
1000
2000
3000
4000
5000
6000
7000
8000
1000
2000
3000
4000
5000
6000
7000
8000
1000
2000
3000
4000
5000
6000
7000
8000
7400 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 24 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TM24P4G001
6400 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 24 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TM24P4H001
7400 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 48 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TM48P4G001
6400 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 48 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TM48P4H001
■ PWM Input Signal Example
Input signal waveform
T
T1
VIL
VIH
T ×100T1
T1
VIH = 4.75 to 5.25 V VIL = 0 to 0.4 V
PWM duty cycle (%) = PWM frequency 25 (kHz) =
Current source (Isource) = 1 mA max. (when control voltage is 0 V)Current sink (Isink) = 1 mA max. (when control voltage is 5.25 V)Control terminal voltage = 5.25 V max. (when control terminal is open)
When the PWM control terminal is open, the fan speed is the same as the speed at 100% PWM duty cycle.Either a TTL input or open collector/drain input can be used for the PWM input signal.
■ Example of Connection Schematic
10 kΩ
39 kΩ
5 V
22 ΩPWM input signal
IsourceIsink
DC fan input voltage○＋
○－
Inside of DC fan
■ Specifications for Pulse Sensors
Output circuit: Open collector
T0
T1
0 V
VOL
VOH
T2 T3 T4
○－
○＋Inside of DC fan
Ic
Sensor output(VCE)
Sensor Pull-up resistorPull-up voltage
VCE = +27.6 V max.Ic=10 mA max. [VOL=VCE (SAT)=0.8 V max.]
(One revolution)
In case of steady running
Output waveform (Need pull-up resistor)
T1 to 4≒ (1/4) T0
T1 to 4≒ (1/4) T0=60/4N (s)N=Fan speed (min-1)
ø100 × 25 mm
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Inlet nozzle sideFan side
4-ø4.5
120°
120°
120°
ø56±0.53-ø4.5
ø116.6±0.5ø106±0.5
■ Reference Diagram for Mounting (unit: mm)
Finger guard
Inlet nozzle
Fan
Fan
Inlet nozzle
Bolt length: 5 mm max.
(27)(5)
(1.1
5)
■Dimensions (unit: mm)
Rotating direction
Airflowdirection
Airflowdirection
Lead wireAWG 26UL 1430
3-M4
+30300 0
50.5±1
ø56±0.3
60°±1°
ø72
±1
ø74
±1
25±1 18.5±1
ø10
0±1
8.5±
0.5
CATALOG No. C1117B001 ‘21.7
3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan TEL: +81 3 5927 1020 https://www.sanyodenki.com/
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice.
Notice●Please read the "Safety Precautions" on our website before using the product.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●For protecting fan bearings against electrolytic corrosion near strong electromagnetic noise sources, we provide effective countermeasures such as Electrolytic Corrosion Proof Fans and EMC guards. Contact us for details.
Splash Proof Centrifugal Fan9W2TJ type
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Inlet nozzle sideFan side
45°
4-ø4.5
4-ø4.5
ø58±0.5
ø118±0.5ø108±0.5
■ Reference Diagram for Mounting (unit: mm)
Finger guard
Inlet nozzle
Fan
Fan
Inlet nozzle
Bolt length: 6 mm max.
(13)
(102
)
(2)
■Dimensions (unit: mm)
Rotating direction
Airflow direction
Airflow direction
Lead wireAWG 24UL 1430
4-M4
ø13
3±1
91±1
ø92
.8±1
60.6±1
ø77.5±1
46.8
±1
+30300 0
ø58±0.3
27±1
45°±1°
(10)
CATALOG No. C1124B001 ‘21.7
3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan TEL: +81 3 5927 1020 https://www.sanyodenki.com/
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice.
Notice●Please read the "Safety Precautions" on our website before using the product.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●For protecting fan bearings against electrolytic corrosion near strong electromagnetic noise sources, we provide effective countermeasures such as Electrolytic Corrosion Proof Fans and EMC guards. Contact us for details.
ø133 × 91mm
■ Specifications When the optional inlet nozzle (109-1069H) is mounted.
■ Common Specifications
■ Features
The models listed below have pulse sensors with PWM control function.
Model no.Rated voltage
[V]
Operatingvoltage range
[V]
PWMduty cycle*
[%]
Rated current[A]
Rated input[W]
Rated speed[min-1]
Max. airflow[m3/min] [CFM]
Max. static pressure [Pa] [inchH2O]
SPL[dB(A)]
Operatingtemperature
[°C]
Expectedlife[h]
9W2TJ24P0H001 24 20.4 to 27.6100 1.2 28.8 4150 6.39 225 395 1.59 61
-20 to +70 40000/60°C(70000/40°C)
20 0.09 2.16 1150 1.7 60 32 0.13 35
9W2TJ48P0H001 48 36 to 60100 0.55 26.4 4150 6.39 225 395 1.59 61
20 0.08 3.84 1150 1.7 60 32 0.13 35
* PWM input frequency is 25 kHz. Models without specifications at 0% PWM duty cycle have zero fan speed at 0%.
Note: Max input is 45 W at rated voltage.
□ Material Motor case: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
□ Expected life Refer to specifications(L10 life: 90% survival rate for continuous operation in indoor free air at 60°C, rated voltage)Expected life at 40°C is for reference only.
□ Motor protection function Locked rotor burnout protection, Reverse polarity protection
□ Dielectric strength 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and motor case)
□ Insulation resistance 10 MΩ or more with a 500 VDC megger (between lead wire conductors and motor case)
□ Sound pressure level (SPL) At 1 m away from the air inlet
□ Operating temperature Refer to specifications (Non-condensing)
□ Storage temperature -30 to +70°C (Non-condensing)
□ Lead wire ＋ Red Black Sensor Yellow Control Brown
□ Mass 800 g
□ Ingress protection IP68
Water and Dust ProtectionIts IP68-rated(1) water and dust protection, which is improved compared with that of our current model,(2) ensures stable fan operation even in harsh environments.
High Airflow and High Static PressureThis fan delivers a maximum airflow of 6.39 m3/min and a maximum static pressure of 395 Pa.
Low Noise and Energy SavingThe PWM control function enables the control of fan speed, contributing to lowering noise and improving energy efficiency of devices.
(1) The degree of protection (IP code) is defined by IEC 60529 (International Electrotechnical Commission).
(2) Current model: ø133 × 91 mm San Ace 133W 9W1TJ type Splash Proof Centrifugal Fan
■ Airflow - Static Pressure CharacteristicsPWM duty cycle Operating voltage range
0 1 2 3 4
300
0
0
2.0
5 6
200
100
400
500
7
0.5
1.0
1.5
50 100 150 200 250
0 1 2 3 4
300
0
0
2.0
5 6
200
100
400
500
7
0.5
1.0
1.5
50 100 150 200 250
2.0
1.5
1.0
0.5
0
500
0
100
200
300
400
0 50 100 150 200 250
4 5 6 71 2 3
30 1 2
100
200
4 5 6 7
300
400
500
0
0.5
1.5
1.0
2.0
0 50 100 150 200 250
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ24P0H001
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ24P0H001
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
20.4 to 27.6 V
PWM duty cycle 100%24 VDC
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ48P0H001
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ48P0H001
48 to 60 V
36 V
PWM duty cycle 100%48 VDC
Airflow
Sta
tic
pre
ssu
re
AirflowS
tati
c p
ress
ure
Airflow
Sta
tic
pre
ssu
re
Airflow
Sta
tic
pre
ssu
re
■ PWM Duty - Speed Characteristics Example
1000
2000
3000
4000
5000
4150 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 24/48 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TJ24P0H0019W2TJ48P4H001
■ PWM Input Signal Example
Input signal waveform
T
T1
VIL
VIH
T ×100T1
T1
VIH = 4.75 to 5.25 V VIL = 0 to 0.4 V
PWM duty cycle (%) = PWM frequency 25 (kHz) =
Current source (Isource) = 2 mA max. (when control voltage is 0 V)Current sink (Isink) = 1 mA max. (when control voltage is 5.25 V)Control terminal voltage = 10 V max. (when control terminal is open)
When the PWM control terminal is open, the fan speed is the same as the speed at 100% PWM duty cycle.Either a TTL input or open collector/drain input can be used for the PWM input signal.
■ Example of Connection Schematic
PWM input signal
DC fan input voltageInside of DC fan
Control
IsourceIsink
○＋
○－
5.1 kΩ
5 V
■ Specifications for Pulse Sensors
Output circuit: Open collector
T0
T1
0 V
VOL
VOH
T2 T3 T4
○－
○＋Inside of DC fan
Ic
Sensor output(VCE)
Sensor Pull-up resistorPull-up voltage
Rated voltage 24 V fanVCE = +30 V max.Ic=10 mA max. [VOL=VCE (SAT)=0.6 V max.]
Rated voltage 48 V fanVCE = +60 V max.Ic=10 mA max. [VOL=VCE (SAT)=0.6 V max.]
(One revolution)
In case of steady running
Output waveform (Need pull-up resistor)
T1 to 4≒ (1/4) T0
T1 to 4≒ (1/4) T0=60/4N (s)N=Fan speed (min-1)
ø133× 91mm
■ Airflow - Static Pressure CharacteristicsPWM duty cycle Operating voltage range
0 1 2 3 4
300
0
0
2.0
5 6
200
100
400
500
7
0.5
1.0
1.5
50 100 150 200 250
0 1 2 3 4
300
0
0
2.0
5 6
200
100
400
500
7
0.5
1.0
1.5
50 100 150 200 250
2.0
1.5
1.0
0.5
0
500
0
100
200
300
400
0 50 100 150 200 250
4 5 6 71 2 3
30 1 2
100
200
4 5 6 7
300
400
500
0
0.5
1.5
1.0
2.0
0 50 100 150 200 250
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ24P0H001
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ24P0H001
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
PWM duty cycle100%
PWM duty cycle50%
PWM duty cycle20%
20.4 to 27.6 V
PWM duty cycle 100%24 VDC
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ48P0H001
(CFM)
(m3/min)
(Pa)(inch H2O)
9W2TJ48P0H001
48 to 60 V
36 V
PWM duty cycle 100%48 VDC
Airflow
Sta
tic
pre
ssu
re
Airflow
Sta
tic
pre
ssu
re
Airflow
Sta
tic
pre
ssu
re
Airflow
Sta
tic
pre
ssu
re
■ PWM Duty - Speed Characteristics Example
1000
2000
3000
4000
5000
4150 min-1
Fan
sp
eed
PWM duty cycle
Voltage: 24/48 VDCPWM frequency: 25 kHz
(min-1)
(%)1000
9W2TJ24P0H0019W2TJ48P4H001
■ PWM Input Signal Example
Input signal waveform
T
T1
VIL
VIH
T ×100T1
T1
VIH = 4.75 to 5.25 V VIL = 0 to 0.4 V
PWM duty cycle (%) = PWM frequency 25 (kHz) =
Current source (Isource) = 2 mA max. (when control voltage is 0 V)Current sink (Isink) = 1 mA max. (when control voltage is 5.25 V)Control terminal voltage = 10 V max. (when control terminal is open)
When the PWM control terminal is open, the fan speed is the same as the speed at 100% PWM duty cycle.Either a TTL input or open collector/drain input can be used for the PWM input signal.
■ Example of Connection Schematic
PWM input signal
DC fan input voltageInside of DC fan
Control
IsourceIsink
○＋
○－
5.1 kΩ
5 V
■ Specifications for Pulse Sensors
Output circuit: Open collector
T0
T1
0 V
VOL
VOH
T2 T3 T4
○－
○＋Inside of DC fan
Ic
Sensor output(VCE)
Sensor Pull-up resistorPull-up voltage
Rated voltage 24 V fanVCE = +30 V max.Ic=10 mA max. [VOL=VCE (SAT)=0.6 V max.]
Rated voltage 48 V fanVCE = +60 V max.Ic=10 mA max. [VOL=VCE (SAT)=0.6 V max.]
(One revolution)
In case of steady running
Output waveform (Need pull-up resistor)
T1 to 4≒ (1/4) T0
T1 to 4≒ (1/4) T0=60/4N (s)N=Fan speed (min-1)
ø133× 91mm
Splash Proof Centrifugal Fan9W2TJ type
■ Reference Dimensions of Mounting Holes and Vent Opening (unit: mm)
Inlet nozzle sideFan side
45°
4-ø4.5
4-ø4.5
ø58±0.5
ø118±0.5ø108±0.5
■ Reference Diagram for Mounting (unit: mm)
Finger guard
Inlet nozzle
Fan
Fan
Inlet nozzle
Bolt length: 6 mm max.
(13)
(102
)
(2)
■Dimensions (unit: mm)
Rotating direction
Airflow direction
Airflow direction
Lead wireAWG 24UL 1430
4-M4
ø13
3±1
91±1ø
92.8
±160.6±1
ø77.5±1
46.8
±1
+30300 0
ø58±0.3
27±1
45°±1°
(10)
CATALOG No. C1124B001 ‘21.7
3-33-1 Minami-Otsuka, Toshima-ku, Tokyo 170-8451, Japan TEL: +81 3 5927 1020 https://www.sanyodenki.com/
The names of companies and/or their products specified in this catalog are the trade names, and/or trademarks and/or registered trademarks of such respective companies.“San Ace” is a trademark of SANYO DENKI CO.,LTD.Specifications are subject to change without notice.
Notice●Please read the "Safety Precautions" on our website before using the product.●The products shown in this catalog are subject to Japanese Export Control Law. Diversion contrary to the law of exporting country is prohibited.●For protecting fan bearings against electrolytic corrosion near strong electromagnetic noise sources, we provide effective countermeasures such as Electrolytic Corrosion Proof Fans and EMC guards. Contact us for details.
