961 962PB Analog Input Profibus-DP RS485 Module
-
Upload
anonymous-zdcubw8hf -
Category
Documents
-
view
223 -
download
1
Transcript of 961 962PB Analog Input Profibus-DP RS485 Module
-
7/29/2019 961 962PB Analog Input Profibus-DP RS485 Module
1/3
961PB, 962PBAnalog Input:
6-ChannelDifferential Input:DC Current orDC Voltage Signals
Models961PB: 6 DC current input channels962PB: 6 DC voltage input channels
I Description
These modules provide an isolated Profibus-DPnetwork interface for six analog input channels.
Differential inputs eliminate ground loops andthus the need for isolators in many applications.Multi-range inputs accept signals from a variety ofsensor and devices. High-resolution, low noise,A/D converters deliver high accuracy and reliability.
Input RangesDC Current (user-selectable ranges)0 to 1mA, 0 to 11mA, 0 to 20mA, 4 to 20mA0 to 20 amps AC (with optional AC sensor)
DC Voltage (user-selectable ranges)78mV to 10V DC (eight range options)
Network CommunicationProfibus-DP, RS-485 network up to 12Mbaud
Power Requirement12 to 36V DC supply required
ApprovalsProfibus PNO certified.CE marked. UL, cUL listed.Class I; Division 2; Groups A, B, C, D.
I Special Features
I Standard Profibus-DP network communication
with industry-standard ASIC (Siemens SPC3)I 6-input stand-alone module is very economical
I Differential inputs eliminate ground loops
I Universal inputs support a variety of sensors
I High-resolution 16-bit S-D A/D convertersensure precise, high accuracy measurements
I Compact packaging with pluggable terminalssaves space and simplifies wiring
I Wide operational temperature range permitsinstallation in extreme environments
I Performance
I General Specifications
See Page 47 for communication and other specs.
I Input
ConfigurationInput ranges are selectable for a 3-channel group.
AccuracyBetter than 0.05% of span for nominal input ranges.
Analog to Digital Converter (A/D)16-bit S-D converter.
Resolution0.005% or 1 part in 20000.
Noise RejectionNormal Mode: Better than 40dB @ 60Hz.Common Mode: Better than 140dB @ 60Hz.
Input Filter Bandwidth-3dB at 3Hz, typical.
DC Current Input impedance24.9 ohms.
DC Voltage Input impedanceGreater than 110.5K ohms.
I EnvironmentalAmbient TemperatureOperating: -25 to 70C (-13 to 158F).Storage: -40 to 85C (-40 to 185F).
Relative Humidity5 to 95%, non-condensing.
Isolation1500V AC for 60 seconds or 250V AC continuous.3-way isolation between I/O, network, and power.
I Ordering Info
Models961PB-2006
DC current input module, 6 differential channels
962PB-2006DC voltage input module, 6 differential channels
NOTE: Modules include GSD files on CD-ROM.
Accessories (see Page 48)5020-350AC current sensor. Used with 961PB DC current inputmodels. One sensor per channel is required.See page 205.
PS5R-D24Power supply (24V DC, 2.1A).See Power Supplies on Page 199.
TBK-B03
Optional terminal block kit, barrier strip style, 4 pcs.TBK-S03Optional terminal block kit, spring clamp style, 4 pcs.
Tel: 248-295-0880 Fax: 248-624-9234 e-mail: [email protected] www.acromag.com
41
9 0 0 P B S e r i e s
Profibus-DP / RS485
LC
PROFIBUS
RUN BUS
Acromag
2.
34
(59.4
)
1.05(26.7)
NOTE: Dimensions Are INCHES (MILLIMETERS).
3.7
5
(95.3
)
"T" RAIL DIN MOUNTINGDIN EN 50022, 35mm
4.6
8
(118.9
)
46
IN5-
45
IN5+
IN0-
43
IN4+
IN1+
42TB4
TB2 IN
2+
IN3+
IN3-
11 12 14 15 22 23 25 26
TB3
TB1
TB1 IN
0+
IN1-
44 41
TB2
IN2-
TB3
13 16
IN4-
21 24
INPUTS 0, 1
TB4
INPUTS 4, 5
4.35(110.5)
3.90(99.1)
DC-
32
DC+
3133LSDMSD
PWR
SLAVEADDRESS(HEX)
INPUTS 2, 3
-
7/29/2019 961 962PB Analog Input Profibus-DP RS485 Module
2/3
The following specifications are common to all900PB Series I/O modules.
I Communication
Interface StandardIsolated, 3-wire RS-485 multi-drop, half-duplex,asynchronous.
Command/Response ProtocolStandard ProfiBus DP (Master/Slave) protocol perEuropean Norm EN50170.
Baud RateSupports rates of 9600, 19.2K, 44.45K, 93.75K, 187.5K,500K, 1.5M, and 12M bits per second, auto-detected.
Communication DistanceUp to 1200 meters without a repeater using Type Awire (
-
7/29/2019 961 962PB Analog Input Profibus-DP RS485 Module
3/3
ProfibusI/O
BusWorks
Accessories
Tel: 248-295-0880 Fax: 248-624-9234 e-mail: [email protected] www.acromag.com
48
9 0 0 P B S e r i e s
I Ordering Information
5020-350AC current sensor (See page 205)
Barrier strip (left) and spring clamp (right).
I Ordering Information
See individual I/O modules for compatibility.
Terminal Blocks
AC Current Sensor
50W Supply
Input Power Requirement
85 to 264V AC or 105 to 370V DC
Output24V DC, 2.1A (50W)
I Ordering Information
PS5R-D24Universal 50W power supply
See Power Supplies on Page 199 for other modelsand more information.
DIN-Rail MountingFor your convenience, Acromag offers several
mounting accessories to simplify your systeminstallation. Our 19 rack-mount kit provides aclean solution for mounting your I/O modulesand a power supply. Or you can buy precut DINrail strips for mounting on any flat surface.
I Ordering Information
20RM-16-DIN19" rack-mount kit with DIN rail.
DIN RAIL 3.0DIN RAIL 16.7DIN rail strip, Type T, 3 inches (75mm) or16.7 inches (425mm)
3-position:L = 0.66 inches (16.9 mm)
6-position:L = 1.26 inches (32.3 mm)
Spring Clamp Terminal Blocks
Barrier Strip Terminal Blocks
TBK-B01Terminal block kit,two 6-position pieces
TBK-B02Terminal block kit,four 6-position pieces
TBK-B03Terminal block kit,one 3-position andthree 6-position pieces
3-position: L = 0.87 inches (22.3 mm)
6-position: L = 1.47 inches (37.7 mm)
Wire range:AWG #12-26
Wire range:AWG #12-26
Wire range:AWG #12-26
TBK-S01Terminal block kit,two 6-position pieces
TBK-S02Terminal block kit,four 6-position pieces
TBK-S03Terminal block kit,one 3-position andthree 6-position pieces
Mounting Hardware Power Supplies