CertaDriveCertaDrive 40W 1.05A 38V I 230VJuly 31, 2014

Affordable and reliable LED DriversAffordable LED Driver range offering Philips reliability. The CertaDrive range is compatiblewith COB and mid-power LEDs from any LED manufacturer.

Benefits• Driver design based on Philips’ experience and knowledge of conventional fluorescent and

HID technologies• Various power wattage Drivers that are related to the lumen packages/applications• Fixed output Drivers• Independent-version housing design for stand-alone installations

Features• High reliability• Luminaire design flexibility to keep stable/constant• Lumen output and light quality levels• Fast Time to Market• One supplier for professional general lighting LED Drivers• Affordable LED Drivers

Applications• Public buildings (airports, cinemas, theaters, exhibition halls)• Retail (supermarkets, shops)• Office

Electrical input dataSpecification item Value Unit ConditionNominal input voltage 220...240 Vac

Nominal input frequency 50...60 HzNominal input current 0.22 A Input voltage 230 Vac, full loadNominal input power 47 W Input voltage 230 Vac, full loadPower factor ≥ 0.9 Input voltage 230 Vac, full loadTotal harmonic distortion ≤ 20 % Input voltage 230 Vac, full loadEfficiency 85 % Input voltage 230 Vac, full load, maximum output powerInput voltage AC 202...254 Vac Performance rangeInput frequency AC 47.5...63 Hz Maximum permissible range

Electrical output dataSpecification item Value Unit ConditionRegulation method Constant CurrentOutput voltage 32...42 Vdc

Output voltage max. 60 V Peak voltage (RMS) at open loadOutput current 0.945...1.155 A Full output current settingOutput current tolerance ± 10 %Output current ripple ≤ 30 % Ripple (100Hz) = peak / averageOutput power 33...40 W Full outputGalvanic isolation SELV Lamp to mains

Electrical data controls inputSpecification item Value Unit ConditionControl method Fixed

WiringSpecification item Value Unit ConditionInput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire

16...24 AWG WAGO250 (3.5 mm), solid wireInput wire strip length 8.5...9.5 mmOutput wire cross-section 0.2...1.5 mm2 WAGO250 (3.5 mm), solid wire

16...24 AWG WAGO250 (3.5 mm), solid wireOutput wire strip length 8.5...9.5 mmMaximum cable length 600 mm Total length of wiring including LED module, one way

July 31, 2014 © 2014 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40W 1.05A 38V I 230V Page 2 of 6

Dimensions and weightSpecification item Value Unit ConditionLength (A1) 105 mmWidth (B1) 68 mmHeight (C1) 32 mmFixing hole diameter (D1) 3.6 mmFixing hole distance (A2) 87 mmWeight 129 gram

Operational temperatures and humiditySpecification item Value Unit ConditionAmbient temperature +0...+45 ºCTcase-max 75 ºC Maximum temperature measured at Tc-pointTcase-life 65 ºC Measured at Tc-pointMaximum housing temperature 130 ºC In case of a failureRelative humidity 10...90 % Non-condensing

Storage temperature and humiditySpecification item Value Unit ConditionAmbient temperature -25...+85 ºCRelative humidity 5...95 % Non-condensing

LifetimeSpecification item Value Unit ConditionDriver lifetime 30,000 hours Measured temperature at Tc-point is Tcase-life.

Maximum failures = 10%

Programmable featuresSpecification item Value Remark ConditionSet output current (AOC) No See Design-in guide.

Default output current: 1.05 ALED module temperature derating (MTP) NoConstant Lumen Over Lifetime (CLO) NoDC emergency dimming (DCemDIM) No Current output decreased to 15%Corridor mode NoEnergy metering NoDiagnostics No

July 31, 2014 © 2014 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40W 1.05A 38V I 230V Page 3 of 6

FeaturesSpecification item Value Remark ConditionOpen load protection Yes Automatic recoveringShort circuit protection Yes Automatic recoveringOver power protection No Automatic recoveringHot wiring NoSuitable for fixtures with protection class II

Certificates and standardsSpecification item Value Unit ConditionApproval marks CE / ENECIngress Protection classification 20

Additional information

Inrush current

Specification item Value Unit ConditionInrush current Ipeak 16 A Input voltage 230VInrush current Twidth 240 µs Input voltage 230V, measured at 50% Ipeak

Drivers / MCB 16A type B ≤ 35 pcs

Earth leakage currentSpecification item Value Unit ConditionEarth leakage current 0.7 mApk LED module contribution not included

Surge capabilitySpecification item Value Unit ConditionMains surge capability (L-N) 1 kVMains surge capability (L/N-Ground) 2 kV

July 31, 2014 © 2014 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40W 1.05A 38V I 230V Page 4 of 6

Graphs

Operating window

Power factor versus output power

Efficiency versus output power

July 31, 2014 © 2014 Koninklijke Philips Electronics N.V. All rights reserved.CertaDrive 40W 1.05A 38V I 230V Page 5 of 6

Logistical dataSpecification item ValueProduct name CertaDrive 40W 1.05A 38V I 230VOrder codeLogistic code 12NC 9290 009 31908EAN3Pieces per box 32

©2014 Koninklijke Philips Electronics N.V.

All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The informationpresented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed withoutnotice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights. Data subject to change.

Date of release: July 31, 2014

www.philips.com/xitanium