920271 gb premia 9000 TRC - Kuhn.com · PREMIA YOU HAVE A SMALL TRACTOR BUT MANY HECTARES TO SEED...
Transcript of 920271 gb premia 9000 TRC - Kuhn.com · PREMIA YOU HAVE A SMALL TRACTOR BUT MANY HECTARES TO SEED...
PREMIA
YOU HAVE A SMALL TRACTOR BUT MANY HECTARES TO SEED
More hectares have to be sown that demandan investment in a new drill? At the same timeyou don´t want to replace your existing farmtractor?
The mechanical seed drill PREMIA 9000 TRC of 9.00m working width is THE tool for large farms that have smaller tractors, but still demand high outputs. Foldable, trailed drill without preparation tool, this model only
requires horsepowers from as little as 120hp.
YOU WANT TO COMBINE SEEDING
WITH A FERTILIZER APPLICATION
This seed drill is a combined seed/fertilizer
machine. 60% of the hoppers´ capacity is used
for seed, 40% for fertilizer. Both are delivered
in the same row.
YOUR FIELDS ARE NOT ALL IN
ONE PLACE?
That is not a problem with the PREMIA 9000 TRC
seed drill despite its important working width.
Its two 4.50m large sections fold forward to reach
a transport width of only 3.50m.
2
Working width (m/ft)
Transportwidth (m/ft)
Min. tractor powerrequirement
(kW/hp)
PREMIA9000 TRC
9.00 / 29´6´´ 3.50 / 11´6´´ 89 / 120
THE ALL-IN-ONE DRILL FOR HIGH OUTPUTS WITH LITTLE HORSEPOWERS
KUHN´s PREMIA 9000 TRC mechanicalseed drill in brief:
9000 TRC
3
A HIGH-OUTPUT SEED DRILL FOR SMALL TRACTORS
9.00m working width, no preparation tool,
trailed attachment, rear transport wheels that support the drill during work: The mechanical seed drill PREMIA 9000 TRC can be pulled
by tractors from only 120hp on. At the same time it is also adapted to traction powers of up to 350hp. So whatever tractor you have on the farm, you don´t have to change it to achieve higher outputs when seeding with
the new PREMIA 9000 TRC drill.
«This year we have bought a PREMIA 9000 TRC seed drill with which we sowed spring crops. I can say that I really like its accuracy and effi ciency - at a speed of 18km/h it neither doses double seeds nor does it leave gaps. As we are seed producers, it is very important for us to be able to clean the machine properly. This seed drill makes it possible. It is very convenient that the partition in the hopper that separates fertilizer and seed is moveable. If fertilizer was used earlier, it can be moved and the hopper can be fully fi lled with seeds. I also appreciate the compactness of the seed drill itself. With a working width of 9m it can be folded to only 3.5m for a safe transport on any country road or track. For agroholdings like us, whose fi elds are normally not consolidated, this is very important, as driving rules for outsized transport are quite complex.»
VASILY FEDOROVICH SINEGUBOVAssociate director, agro-industrial department of seed production, “AGROTRADE EXPORT» LLC, Ukraine.Agroholding with 68,000ha arable land.Main crops: maize seeds, sunfl ower, winter wheat, barley.
4
PREMIA
GIVE YOUR CROP A POWERFUL START
Combining seeding with fertilizer application
supports not only the seedlings´ development,
but also reduces the number of passes
necessary in the fi eld.
The two PREMIA 9000 TRC hoppers are each
fi tted with a wall, dedicating 60% of their total
capacity for seeds and 40% for fertilizer.
You can also fold these walls rearwards to use
approx. 95% or 3,540l of the hopper capa-
city for seeds only, if no starter fertilizsation is
intended.
A METERING SOLUTION FOR ALL SEEDS
The four metering units – 2 for seeds and
2 for fertilizer - are fi tted with the tried and
tested HELICA helically fl uted rollers.
This metering solution doses rates from
1.5 to 300kg/ha and is suitable for all seed
types, sizes and shapes. The units are
mechanically driven with land wheels at the
side of the drill via 6 cam variators, thus
providing a consistent seed fl ow regardless
of forward or metering unit rotation speed.
Many parts of the HELICA distribution units
are made of stainless steel for a maximum
service life.
PLACE THE FERTILIZER AS CLOSE TO THE SEED AS POSSIBLE
On PREMIA 9000 TRC the fertilizer is mixed
with the seed after the metering unit and
delivered in the same row. This solution is
adapted for starter fertilizers and makes the
nutrients quickly available for the germinating
plants. Moreover the technical conversion is
rather simple and thus demands hardly any
extra investment.
9000 TRC
A FLEXIBLE SEEDING AND FERTILIZING SOLUTION
5
PRECISION AT HIGH SPEED
The CROSSFLEX coulter bar ensures
a consistent seeding depth in virtually
all conditions and also at elevated
working speeds of up to 15kph, while
keeping a simple structure.
The single coulter arms are mounted
to a specially profi led tube using four
polyurethane blocks. This combination
allows a high coulter pressure of 80kg
whilst still allowing upwards defl ection
of the coulter should it encounter an
obstacle.
CUTTING-EDGE DOUBLE DISCS
The double discs with 350mm diameter
and 41mm offset are well-conceived.
With its leading edge, they not only
penetrate the soil effi ciently, but this
feature also improves cutting through
crop residues and consequently prevents
the residues from being pinned down in
the seed furrow.
Another important detail: The seed outlet
between the double discs is positioned
in front of the discs´ hub. This provides
for great seeding precision, because the
seed can “accompany” the discs in its
downward rotational movement.
THE PERFECT FINISH
350 x 50mm press wheels ensure a reliable
depth guidance and tamping behind the seed
coulters. Being semi-pneumatic
allows their surface to fl ex a little to keep them
clean. They are also fi tted with scrapers as
standard.
Additionally one pair of covering harrow tines is
mounted at every other seed unit. The tines are
mounted on spring leafs to
prevent blockages as well as to ensure that tine
movement will not affect the seeding depth.
Its work intensity can be adjusted behind each
coulter by the means of a cam adjuster.
EVERYTHING FOR A HIGH SEEDING QUALITY
6
PREMIA
LARGE AT WORK. NARROW ON THE ROAD.
A chassis consisting of two 4.50m seed drill sections allows reducing the 9.00m working width to 3.50m for safe travel on the road. To achieve that, the two sections are simply folded vertically forwards in a lengthways transport position. The rear wheels support the drill during work as well as transport.
EXCELLENT GROUND ADAPTATION
Each of the two coulter bar sections of 4.50m width is articulated on one central point and therefore able to pivot independently, thus providing excellent ground adaptation. When raised to headland position, the two sections are locked to prevent contact with the ground during turning.
COMPREHENSIVE ELECTRONIC MONITORING
The HECTOR 3000 control box performs following functions to facilitate seeding with the PREMIA 9000 TRC drill:- monitoring of seed level and metering unit rotation via sensors;- daily and total hectare counter;- tramlining with 2 x 2 rows shut-off.
With the additional KSM01 box you can:- pre-select all hydraulic functions;- control the work lights.
EASY ADJUSTMENTS OF SEEDING DEPTH AND COULTER PRESSURE
The seeding depth is set using simple clips, which are placed onthe hydraulic cylinders controlling the position of the transport
wheels. Also the coulter pressure of maximal 80kg is adjusted thisway for 1.50m large sections separately directly on the coulterbar.
Due to this universal system it is possible to record the settingseasily for future reference. Extra clips can be stored on themachine.
ACCURATE APPLICATION RATE
The application rate is adjusted via a single micrometric screw,
which sets the size of fl ute opening. Result: accurate adjustmentfor a constant seed application rate.The metering uniformity of small seed amounts, for example inthe case of rape, is improved by using the built-in «small seed»fl uting.
Therefore on the PREMIA 9000 TRC drill, you change seeds in afl ash, without having to handle the distribution.
COMFORT FEATURES FOR YOUR BENEFITPATENT
9000 TRC
7
KUHN SERVICES*
Maximize the use and productivity of your KUHN equipment
*Not all services and equipment are available in every country.
INVEST RATIONALLY!New machine necessary, fi nancing unsure? Modernize your equipment and develop your farm with KUHN fi nance, in total safety and according to your needs and demands. We offer custom-made fi nance solutions, adapted to your requirements.
FOR EVER QUICKER REPAIRS!An unexpected technical problem always occurs at the wrong time. Your KUHN dealer can support you quickly and effi ciently thanks to KUHN i tech. With this 24/7 online service, a quick and exact diagnosis is possible.
EXPRESS SPARE PARTS SERVICE 24/7You urgently need spare parts? With KUHN sos order benefi t from express delivery seven days a week, 365 days a year. Thus, you can minimize machine downtime considerably and increase your work output.
THE CHOICE OF PROFESSIONALS!Benefi t from 36 months in complete serenity because of KUHN´s protect + warranty. You can concentrate exclusively on your work and the performance of your machine. Because this is what you expect, when investing in high-tech machinery.
Technical specifi cations Trailed Mechanical Seed Drill
PREMIA 9000 TRC
Working width (m/ft) 9.00 / 29´6´´
Transport width (m/ft) 3.50 / 11´6´´
Transport length (m/ft) 10.10 / 33´2´´
Seed hopper capacity (l) 2,240
Fertilizer hopper capacity (l) 1,520
Hopper width (m/ft) 0.82 / 2´8´´
Hopper length (m/ft) 3.54 / 11´7´´
Min. fi lling height (m/ft) 2.03 / 6´8´´
No. of seeding rows 60 seed + 60 fertilizer
Row spacing (mm/in) 150 / 5.9´´
Working speed range (kph) 3 to 15
Max. coulter pressure (kg/lbs) 80 / 176
Seeding system CROSSFLEX coulter bar with double discs and press wheels
Coulter disc diameter x thickness (mm/in) 350 x 3 / 14´´ x 0.1´´
Offset of double discs 41 / 1.6´´
Seed distribution system HELICA fl uted metering units
Metering unit drive mechanical
Application rate range (kg/ha) 1.5 to 300
Control systemHECTOR 3000 control box: monitoring of seed level, seed distribution, hectar counter,
tramlining (option)
Lighting / signalling standard
Attachment lower link hitch, cat. 3
Transport wheel dimensions 1,350 x 600 (600/55-26.5)
Hydraulic tractor requirement 2 spool valves
Min. tractor power requirement (kW/hp) 89 / 120
Weight of basic machine with empty hopper (kg/lbs) 7,100 / 15,653
Optional equipment: tramlining – track eradicators for transport wheels – side markers.
www.kuhn.com
KUHN
be strong, be KUHN
1 2 3 4
8765
To p
rote
ct
the e
nvi
ronm
ent,
this
leafl e
t is
printe
d o
n c
hlo
rine-f
ree p
ap
er. /
Printe
d in F
rance -
920 2
71 G
B -
07.1
7 -
Cop
yrig
ht
2017 K
UH
N
KUHN S.A. 4 Impasse des Fabriques - BP 50060F-67706 Saverne CEDEX - FRANCE
KUHN NORTH AMERICA, INC.1501 West Seventh Avenue - Brodhead, WI 53520 - USA
KUHN FARM MACHINERY PTY. LTD313-325 Foleys Road - Deer Park, VIC, 3023 - AUSTRALIA
KUHN FARM MACHINERY (U.K.) LTD
Stafford Park 7 - GB TELFORD/ SHROPS TF3 3BQ
For more information about your nearest KUHN dealer, visit our website
www.kuhn.com
Your KUHN dealer
Visit us on our YouTube channels.
Information given in this document is only for information purposes and is non-contractual. Our machines are in compliance with regulations in force in the country of delivery. In our literature, and for improved illustration of
certain details, some safety devices may not be in operating position. When operating these machines, these devices must be in position in accordance with the requirements indicated in the operator’s manuals and assembly manuals. Respect the tractor gross vehicle weight rating, its lift capacity and maximum load per
axle and tyres. The tractor front axle load must always comply with the regulations of the country of delivery (In Europe, it must reach minimum 20 % of the tractor net weight). We reserve the right to change any designs,
specifi cations or materials listed without further notice. Machines and equipment in this document can be covered by at least one patent and/or registered design. Trademarks cited in this document may be registered in one or several countries.
Also fi nd KUHN on
Check out KUHN’s extensive offer of tillage tools.
KUHN foundries and forge as well as a high-level manufacturing process allow the production of
spare parts to defy time. You can truly rely on our know-how and our genuine parts. Farmers benefi t
from our client support and logistics services via any KUHN PARTS warehouse, which provide quick
and reliable repair solutions in cooperation with your nearest authorized KUHN dealer.
1. mounted mechanical / 2. integrated mechanical / 3. with fronthopper / 4. integrated pneumatic / 5. mounted drill combination /6. mounted min-till / 7. trailed min-till / 8. precision seed drills.
DESIGNED AND MANUFACTURED TO RIVAL TIME
PARTS