91595883 Routing EIGRP PT Practice SBA Resp

Routing EIGRP PT Practice SBA

A few things to keep in mind while completing this activity:

1. Do not use the browser Back button or close or reload any Exam windows during the exam.

2. Do not close Packet Tracer when you are done. It will close automatically.

3. Click the Submit Assessment button to submit your work.

IntroductionIn this Packet Tracer Practice Skills-based Assessment, you will:

• complete the configuration of a partially configured network

• establish connectivity to the West Region and the Internet through the use of static and dynamic routing

• verify connectivity

Addressing Table

Device Interface Address Subnet Mask Default Gateway

EastHQ

S0/0/0 192.168.1.249 255.255.255.252 N/A

S0/0/1 192.168.1.253 255.255.255.252 N/A

S0/1/0 209.165.201.6 255.255.255.252 N/A

S0/1/1 192.0.2.2 255.255.255.252 N/A

E-Branch1

Fa0/0 192.168.0.1 255.255.255.128 N/A

Fa0/1 192.168.0.129 255.255.255.128 N/A

S0/0/0 192.168.1.250 255.255.255.252 N/A

S0/0/1 192.168.1.245 255.255.255.252 N/A

E-Branch2

Fa0/0 192.168.1.1 255.255.255.192 N/A

Fa0/1 192.168.1.65 255.255.255.192 N/A

S0/0/0 192.168.1.254 255.255.255.252 N/A

S0/0/1 192.168.1.246 255.255.255.252 N/A

EPC1 NIC 192.168.0.2 255.255.255.128 192.168.0.1

EPC2 NIC 192.168.0.254 255.255.255.128 192.168.0.129

EPC3 NIC 192.168.1.2 255.255.255.192 192.168.1.1

EPC4 NIC 192.168.1.126 255.255.255.192 192.168.1.65

NetAdmin NIC 192.168.1.66 255.255.255.192 192.168.1.65

Note: The password for user EXEC mode is cisco. The password for privileged EXEC mode is class.

Step 1: Configure the Device Basics.

Note: Initially, you can only access router E-Branch2 through the console connection on NetAdmin.

a. Configure the following on E-Branch2:

• The router name is EB2.

• The privileged EXEC mode uses the following encrypted password: class.

• Enable Telnet and console line logins and use the following password: cisco.

• Configure the banner message-of-the-day as Authorized access only!

b. Using the Addressing Table, configure and activate all the necessary interfaces on E-Branch2.

c. Configure correct host IP addressing.

• Configure EPC2 with the last IP address in the subnet.

• Configure EPC4 with the last IP address in the subnet.

Step 2: Discover the Network.

a. Explore the network to determine the IP address of the serial interface that EastHQ uses to connect to E-Branch2.

b. Remotely access EastHQ.

Step 3: Configure Static and Default Routing.

a. Configure connectivity to the West Region.

• Configure a static route on EastHQ to the entire West Region. The West Region uses the 172.16.100.0/24 address space. Use the next-hop address argument.

• Configure a default route on EastHQ to send to the Internet all other traffic for destinations that are not found in the EastHQ routing table. Use the exit interface argument.

b. Verify static and default routing.

Step 4: Configure EIGRP Routing.

Configure EIGRP on EastHQ, E-Branch1, and E-Branch2.

a. Use AS number 100.

b. Do not advertise the network between EastHQ and the Internet.

c. Do not advertise the network between EastHQ and the West Region.

d. Advertise all other attached networks.

e. Disable automatic summarization.

f. Disable EIGRP updates out interfaces where there are no EIGRP neighbors available.

g. On EastHQ, enter the one command in the EIGRP routing process that will propagate the default and static routes to E-Branch1 and E-Branch2.

Step 5: Modify the default EIGRP operation.

a. Configure the link between EastHQ and E-Branch2 so that the correct bandwidth of 384 k/s is used in EIGRP calculations.

b. Configure E-Branch1 to advertise a summary route for the subnets 192.168.0.0/25 and 192.168.0.128/25 to EastHQ and E-Branch2.

c. Configure E-Branch2 to advertise a summary route for the subnets 192.168.1.0/26 and 192.168.1.64/26 to EastHQ and E-Branch1.

Step 6: Verify Full Connectivity.

Although these are not scored, the following connectivity tests should be successful.

• Test connectivity to the West Region.

• Test connectivity to the Internet.

Version 1.0Created in Packet Tracer 5.3.1.0044 and Marvel 1.0.1All contents are Copyright © 1992 - 2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.

EB1

EB1#sh run

Building configuration...

Current configuration : 1261 bytes

!

version 12.4

no service timestamps log datetime msec

no service timestamps debug datetime msec

no service password-encryption

!

hostname EB1

!

!

!

enable secret 5 $1$mERr$9cTjUIEqNGurQiFU.ZeCi1

!

!

!

!

!

!

!

!

!

!

ip ssh version 1

no ip domain-lookup

!

!

!

!

!

!

interface FastEthernet0/0

ip address 192.168.0.1 255.255.255.128

duplex auto

speed auto

no cdp enable

!


ip address 192.168.0.129 255.255.255.128

duplex auto

speed auto

no cdp enable

!

interface Serial0/0/0

description Link to EHQ

ip address 192.168.1.250 255.255.255.252

ip summary-address eigrp 100 192.168.0.0 255.255.255.0 5

!


description Link to EB2

ip address 192.168.1.245 255.255.255.252


clock rate 2000000

!

interface Vlan1

no ip address

shutdown

!

router eigrp 100

passive-interface FastEthernet0/0


network 192.168.0.0 0.0.0.127

network 192.168.0.128 0.0.0.127

network 192.168.1.248 0.0.0.3

network 192.168.1.244 0.0.0.3

no auto-summary

!

ip classless

!

!

!

banner motd ^CAuthorized Access Only!^C

!

!

!

!

line con 0

exec-timeout 0 0

password cisco

logging synchronous

login

line vty 0 4

password cisco

login

!

!

!

End

EB2

EB2#SH RUN



!

version 12.4




!

hostname EB2

!

!

!


!

!

!

!

!

!

!

!

!

!

ip ssh version 1

!

!

!

!

!

!


ip address 192.168.1.1 255.255.255.192

duplex auto

speed auto

no cdp enable

!


ip address 192.168.1.65 255.255.255.192

duplex auto

speed auto

no cdp enable

!


bandwidth 384

ip address 192.168.1.254 255.255.255.252


!


ip address 192.168.1.246 255.255.255.252


!

interface Vlan1

no ip address

shutdown

!

router eigrp 100



network 192.168.1.0 0.0.0.63

network 192.168.1.64 0.0.0.63

network 192.168.1.252 0.0.0.3

network 192.168.1.244 0.0.0.3

no auto-summary

!

ip classless

!

!

!

banner motd ^CAuthorized access only!^C

!

!

!

!

line con 0

password cisco

logging synchronous

login

line vty 0 4

password cisco

logging synchronous

login

!

!

!

End

EASTHQ

EastHQ#sh run



!

version 12.4




!

hostname EastHQ

!

!

!


!

!

!

!

!

!

!

!

!

!

ip ssh version 1

no ip domain-lookup

!

!

!

!

!

!


no ip address

duplex auto

speed auto

shutdown

!


no ip address

duplex auto

speed auto

shutdown

!


ip address 192.168.1.249 255.255.255.252

clock rate 2000000

!


bandwidth 384

ip address 192.168.1.253 255.255.255.252

clock rate 2000000

!


ip address 209.165.201.6 255.255.255.252

no cdp enable

!


ip address 192.0.2.2 255.255.255.252

!

interface Vlan1

no ip address

shutdown

!

router eigrp 100

redistribute static

network 192.168.1.248 0.0.0.3

network 192.168.1.252 0.0.0.3

no auto-summary

!

ip classless

ip route 172.16.100.0 255.255.255.0 192.0.2.1

ip route 0.0.0.0 0.0.0.0 Serial0/1/0

!

!

!

banner motd ^CAuthorized Access Only!^C

!

!

!

!

line con 0

exec-timeout 0 0

password cisco

logging synchronous

login

line vty 0 4

password cisco

login

!

!

!

end

91595883 Routing EIGRP PT Practice SBA Resp

Documents

Transcript of 91595883 Routing EIGRP PT Practice SBA Resp