+9 zx\hyl ilht
Transcript of +9 zx\hyl ilht
2
square axle beam include:
BPW 150mmSquare Beam16mm Wall
164%
61.5
100%
46.5
85%
50.6
82%
47.5
77%
44
BPW 120mmSquare Beam15mm Wall
127mmRound Beam19mm Wall*
BPW 127mmRound Beam17.5mm Wall
127mmRound Beam16mm Wall*
WEIGHT OF AXLE BEAM SECTION(kg per metre length)
RELATIVE BENDING STRENGTH
Square Beam
Strength to weight ratio
Round Beam*Not available from BPW
BPW TRAILER AXLES 9 to 12 tonne
CAPACITY RANGE
H/R SERIES 20”, 22.5” SN4218 DRUM Ø420 x 180mm
KH SERIES 19.5” SN3620 DRUM Ø360 x 200mm
NH SERIES 15”, 17.5” SN3020 DRUM Ø300 x 200mm
SH SERIES 20”, 22.5” TSB4309 DISC Ø430mm
SKH SERIES 19.5” TSB3709 DISC Ø370mm
120m
m S
qu
are
Ø12
7mm
Ro
un
d
150m
m S
qu
are
Sp
ider
10 s
tud
225
mm
pcd
8 s
tud
275
mm
pcd
10 s
tud
285
mm
pcd
10 s
tud
335
mm
pcd
BPW MODELRANGE
TO SUITTYRE SIZE
BRAKEMODEL
BRAKETYPE
BRAKESIZE
AXLE BEAMOPTIONS HUB OPTIONS
3
BPW bearings
4
ECO-Li Plus grease
5
drum braked axles include:
6
Anti-skid brakes
7
8
disc braked axles include:
BPW ECODisc
9
AXLE MODEL
HUB
ECO PLUS 10/12
TONNE
AXLEBEAM
A Nominal Track on Ground
(mm)
B Nominal
b/w Drum
(mm)
C Flange Track
(mm)
D Slack
Adjuster Centres
(mm)
Camshaft Location
(Drawing No.)
Axle Capacity
With spring suspension
(kg)
Axle Capacity
With airbag suspension
(kg)
Tare Weight
per Axle
(kg)
HXZ10100-15
Dual Spider
120sq x 15mm
1,840-1,850 depending
on rim size
1,262
N/A
261 BL-04
12,000 10,000 384
HXZ10000-16 150sq x 16mm BL-06 12,000 402
RXZ10000 Ø127 x 17.5mm 1,265 264
BL-08 11,000 N/A 384
RXZH10000 BL-09 11,000
HZM10110-15
Dual 10 Stud
335mm pcd
120sq x 15mm 1,820 with steel
wheels
1,840 with aluminium
wheels
1,262 1,807 261 BL-04
12,000 10,000 335
HZM10010-16 150sq x 16mm BL-06 12,000 353
RZM10010 Ø127 x 17.5mm 1,265 1,810 264
BL-08 11,000 N/A 335
RZMH10010 BL-09 11,000
HZA10110-15
Dual 10 Stud
285mm pcd
120sq x 15mm 1,820 with steel
wheels
1,840 with aluminium
wheels
1,262 1,807 261 BL-04
12,000 10,000 345
HZA10010-16 150sq x 16mm BL-06 12,000 363
RZA10010 Ø127 x 17.5mm 1,265 1,810 264
BL-08 11,000 N/A
RZAH10010 BL-09 11,000 345
B
D
A
C
Nominal Track on Ground with Camber
285
PCD
Flange Track, @ Axle Centre
335
PCD
AXLE CAPACITY: Above figures are for vehicles travelling at 105km/h, with axles mounted at 980mm spring centres on spring suspensions, and 950mm centres on BPW airbag suspensions.BRAKES: BPW 420x180mm, s-cam Mechanical, ADR approval SARN6916.10 STUD AXLES: Are supplied with wheel nuts to suit ISO spigot aligned wheels.DUAL SPIDER HUBS: Accept 4.25” spacer bands.LUBRICATION: ECO Li-Plus semi-synthetic long life bearing grease.
SLACK ADJUSTER: BPW manual slack adjuster fitted as standard, BPW ECO-Master automatic slack adjusters optional.TARE WEIGHTS & DIMENSIONS: Are subject to normal manufacturing tolerances.CAMSHAFT LOCATION: Note the standard booster locations listed above may not suit all suspension configurations. Other booster location options are available. Refer booster location chart in this brochure.Spider hubs not available for single tyres.
”
10
AXLE MODEL HUB
AXLEBEAM
A Nominal Track on Ground
(mm)
B Nominal
b/w Drum
(mm)
C Flange Track
(mm)
D Slack
Adjuster Centres
(mm)
Camshaft Location
(Drawing No.)
Axle Capacity @ 1,200mm
SpringCentres (kg)
Tare Weight per Axle
Assembly (kg)
steel wheels
BL-04
BL-06
BL-08
12,000
120sq x 15mm
150sq x 16mm 1,462
1,455
2,007
2,000
461345
367
356454
HSM10110 -15
HSM10010 -16
Single 10Stud
335 pcd ECO Plus HubRSM10010 Ø127 x 17.5mm
2,010 with
2,010 with
steel wheels
BL-04
BL-06
BL-08
12,000
120sq x 15mm
150sq x 16mm 1,462
1,455
2,007
2,000
461355
377
354454
HSA10110 -15
HSA10010 -16
Single 10Stud
285 pcd ECO Plus HubRSA10010 Ø127 x 17.5mm
AXLE MODEL
HUB
ECO PLUS 10/12
TONNE
AXLEBEAM
A Nominal Track
on Ground
(mm)
C Flange Track
(mm)
Booster Location
(Drawing
No.)
Axle Capacity
With spring suspension
(kg)
Axle Capacity
With airbag suspension
(kg)
Tare Weight
per Axle
(kg)
SKHZM10108-15 Dual 8 Stud
275mm pcd 120sq x 15mm
1,825 with steel wheels
1,845 with alum wheels
1,807 12,000 10,000 295
BL-32
BL-33
A
C
Nominal Track on Ground with Camber
ANominal Track on Ground with Camber
Flange Track, @ Axle Centre
CFlange Track, @ Axle Centre
A
C
Nominal Track on Ground with Camber
Flange Track, @ Axle Centre
AXLE CAPACITY: Above figures are for vehicles travelling at 105km/h, with axles mounted at 980mm spring centres on spring suspensions, and 950mm centres on BPW airbag suspensions. Note clearance checks are recommended before installing BPW Disc Brake axles onto spring suspensions.BRAKES: For 20” tyres, BPW TSB4309 Disc Brake, ADR approval SARN31666.For 19.5” tyres, BPW TSB3709 Disc Brake, ADR approval SARN25677.
8 and 10 STUD AXLES: Are supplied with wheel nuts to suit ISO spigot aligned wheels.LUBRICATION: ECO Li-Plus semi-synthetic long life bearing grease.TARE WEIGHTS & DIMENSIONS: Are subject to normal manufacturing tolerances.BOOSTER LOCATION: Note the standard booster locations listed above may not suit all suspension configurations. Refer booster location chart in this brochure.
”
”
11
AXLE MODEL
HUB
ECO PLUS 10/12
TONNE
AXLE BEAM
A Nominal Track on Ground
(mm)
C Flange Track
(mm)
Booster Location
(Drawing
No.)
Axle Capacity
With spring suspension
(kg)
Axle Capacity
With airbag suspension
(kg)
Tare Weight
per Axle
(kg)
SHZM10110-15
Dual 10 Stud 335mm pcd
120sq x 15mm 1,820 with steel wheels
1,840 with alum wheels
1,807 BL-28 12,000 10,000 317
SHZA10110-15
Dual 10 Stud
285mm pcd 120sq x 15mm
1,820 with steel wheels
1,840 with alum wheels 1,807 BL-28 12,000 10,000 307
2,053 with steel wheels
2,063 with alum wheels
2,053 with steel wheels
2,063 with alum wheels
120sq x 15mm SHSM10110 -15Single 10
Stud 335mm pcd
120sq x 15mm SHSA10110 -15Single 10
Stud 285mm pcd
2,040
2,040
BL-28
BL-29
BL-30
BL-31
12,000
12,000
10,000
10,000
328
318
D
A
B
CFlange Track, @ Axle Centre
Nominal Track on Ground with Camber
225
PCD
D
A
B
CFlange Track, @ Axle Centre
Nominal Track on Ground with Camber
8 STUD275 PCD
10 STUD225 PCD
AXLE CAPACITY: Above figures are for vehicles travelling at 105km/h, with axles mounted at 980mm spring centres on spring suspensions, and 950mm centres on BPW airbag suspensions.BRAKES 15” NR9000: BPW 300 x 200mm, s-cam Mechanical, ADR approval SARN16593.BRAKES 19.5” KH101: BPW 360 x 200mm, s-cam Mechanical, ADR approval SARN10155.8 and 10 STUD AXLES: Are supplied with wheel nuts to suit ISO spigot aligned wheels.NR 15” DUAL SPIDER HUBS: Accept 4” spacer bands.LUBRICATION: ECO Li-Plus semi-synthetic long life bearing grease.
SLACK ADJUSTER: BPW manual slack adjuster fitted as standard, BPW ECO-Master automatic slack adjusters optional.TARE WEIGHTS & DIMENSIONS: Are subject to normal manufacturing tolerances.CAMSHAFT LOCATION: Note the standard booster locations listed above may not suit all suspension configurations. Other booster location options are available. Refer booster location chart in this brochure.Spider hubs not available.
AXLE MODEL
HUB AXLEBEAM
A Nominal Track on Ground
(mm)
B Nominal
b/w Drum
(mm)
C Flange Track
(mm)
D Slack
Adjuster Centres
(mm)
Camshaft Location
(Drawing No.)
Axle Capacity
With spring suspension
(kg)
Axle Capacity
With airbag suspension
(kg)
Tare Weight
per Axle
(kg)
NHZM10110-15 Dual ECO Plus 10/225mm pcd 120sq x 15mm 1,850 with
steel wheels
1,920 with steel wheels 1,270 1,900 279 BL-36 10,000 10,000 300
1,200 1,830 279 BL-36 10,000 10,000 300
AXLE MODEL
HUB ECO PLUS
10/12 TONNE
AXLE BEAM
A Nominal Track on Ground
(mm)
B Nominal
b/w Drum
(mm)
C Flange Track
(mm)
D Slack
Adjuster Centres
(mm)
Camshaft Location
(Drawing
No.)
Axle Capacity
With spring suspension
(kg)
Axle Capacity
With airbag suspension
(kg)
Tare Weight
per Axle
(kg)
KHZM10108-15 Dual 8 Stud
275mm pcd 120sq x 15mm
1,825 with steel wheels
1,845 with alum wheels
1,250 1,807 263 BL-11 11,500 10,000 325
”
”
12
BPW SELF STEERING TRAILER AXLES
9 to 12 tonneAUSTRALIAN RANGE
HLL SERIES 20”, 22.5” SN4218 DRUM Ø420 x 180mm
KMLL SERIES 19.5” SN3620 DRUM Ø360 x 200mm
NMLL SERIES 15”, 17.5” SN3020 DRUM Ø300 x 200mm
SMLL SERIES 20”, 22.5” TSB4309 DISC Ø430mm
SKMLL SERIES 19.5” TSB3709 DISC Ø370mm
120m
m S
qu
are
Ho
llow
120m
m S
qu
are
So
lid
150m
m S
qu
are
Ho
llow
Sp
ider
10 s
tud
225
mm
pcd
8 s
tud
275
mm
pcd
10 s
tud
285
mm
pcd
10 s
tud
335
mm
pcd
BPW MODELRANGE
TO SUITTYRE SIZE
BRAKEMODEL
BRAKETYPE
BRAKESIZE
AXLE BEAMOPTIONS HUB OPTIONS
13
BL-05
BL-08
BL-03
BL-09
BL-04
227
70.5
133.5
227
70.5
133.5227
43
148
148
43
227
133.5
70.5
227 154
195
☞ ☞☞☞ ☞
☞ ☞
BL-18
148
43
195
BL-06
standard
227
62
139.5☞
BL-07139.5
62
227
☞
optional
BL-11
standard
BL-12123
185
227
123☞ ☞
optional
120mm Square Axle BeamSN4218 Brakes, for 20/22.5” tyres
150mm Square Axle BeamSN4218 Brakes, for 20/22.5” tyres
Dimensional Drawings areavailable from BPW Transpec
DIRECTION OF TRAVEL☞
127mm Round Axle BeamSN4218 Brakes, for 20/22.5” tyres
120mm Square Axle BeamSN3620 Brakes, for 19.5” tyres
BL-36
standard☞
120mm Square Axle BeamSN3020 Brakes, for 15/17.5” tyres
standard
optional
BL-01
standardoverslung
standardunderslung
120mm Square Axle BeamTSB4309 BPW Eco Disc Brake
BL-28standardoverslung
BL-29
☞
120mm Square Axle BeamTSB4309 BPW Eco Disc Brake
standardunderslung
120mm Square Axle BeamTSB3709 BPW Eco Disc Brake
120mm Square Axle BeamTSB3709 BPW Eco Disc Brake
BL-32 BL-33
standard overslung
standardunderslung112
227
NOTE: The correct booster pushrod length is shown on these diagrams, and is measured from the mounting face of the brake chamber to the centre line of the clevis pin with the brakes released. Any other length will impair brake efficiency. The correct brake chamber size and slack adjuster lever arm length are determined by the trailer manufacturer, taking into consideration axle loads, tyre size, vehicle configuration and regulatory requirements. With the above diagrams, the booster size and slack adjuster mounting locations are shown for reference only.
14
Track
Axle beam camber
ADR Approval No.Brake Size/Model Application
Axles for 20”/22.5” wheelsup to
12 tonne capacity
Axles forsleehw ”5.71/”51
Axles forsleehw ”5.91
Axles for20”/22.5”/24” wheelsover 12 tonne capacity
Axles for 19.5” tyres
Axles for 20”/22.5” tyres
6916ø420 x 180SN4218
Drum
ø370 DiscTSB3709
ø430 DiscTSB4309
25474ø420 x 200
SN4220Drum
16593ø300 x 2000203NS
Drum
10155
25677
31666
ø360 x 2000263NS
Drum
H ZA 101 10 A 11 S P S N
NR Round Beam 127mm, 15" Tyres H Square Beam 120mm & 150mm, 20" Tyres
R Round Beam 127mm, 20" Tyres
KH Square Beam 120mm, 19.5" Tyres
SH Square Beam 120mm, 20" Tyres
SKH, SK Square Beam 120mm, 19.5" or 20" Tyres NH Square Beam 120mm, 15"/17.5" Tyres
ZA 10 Stud 285 PCD Dual Wheel, Spigot Mount ZM 10 Stud 335 PCD, 8 Stud 275 PCD, 10 Stud 225 PCD Dual Wheel, Spigot Mount
SA 10 Stud 285 PCD Single Wheel, Spigot Mount
SM 10 Stud 335 PCD Single Wheel, Spigot Mount
XZ Spider Dual Wheel X Spider Single Wheel
90 9 tonne bearing combination, 120mm square or 127mm round axle beam 91 10/12 tonne bearing combination, 120mm square axle beam
100 10/12 tonne bearing combination, 150mm square or 127mm round axle beam 101 10/12 tonne bearing combination, 120mm square axle beam, ECOPlus
00 Spider 08 8 Stud 10 10 Stud
A Drum Brake ø420 x 180mm, suits 20" Tyres
B Drum Brake ø360 x 200mm, suits 19.5" Tyres
C Drum Brake ø300 x 200mm, suits 15" Tyres
D Disc Brake SB3745 (Knorr Caliper), ø370mm rotor, suits 19.5" and 20" Tyres
E Disc Brake SB4309T (Knorr Caliper), ø430mm rotor, suits 20" Tyres
F Disc Brake SB3745T (Knorr Caliper), ø370mm rotor, suits 19.5" Tyres
G Disc Brake TSB4309 (BPW Caliper), ø430mm rotor, suits 20" Tyres H Disc Brake TSB3709 (BPW Caliper), ø370mm rotor, suits 19.5" Tyres
00
99
S Standard Hubcap
BPW TRANSPEC AXLE MODEL AND PART NUMBERSFor Australian Assembled Axles
Axle Part Number ExampleLegend
Axle Beam Profile
Hub
Bearing Combination
Wheel Fixing
Brake Size
Serial No Consecutive Serial No 00 - 99
Hubcap Typep
H Hubcap with Hubodometer
buH lanoitnevnoC ,esaerGG buH lanoitnevnoC ,liOO
buH lanoitnevnoC ,laes liO htiw esaerGB
esaerG ,buH OCEE
)XXAM OCE( sduts ni hsuP ,esaerG ,buH OCEM P ECO Plus Hub, Grease
sretsujdA kcalS launaMS elohitlum htiw sretsujdA kcalS launaMM
A (Drum Brake Only) Automatic Slack Adjusters
N No ABS fitted A ABS fitted
Slack Adjuster
ABS
Hubcap Type
Hub Lubrication
BPW axle model and part numbers for Australian-assembled axles
15
VICTORIA (Head Office)
1-11 Cherry Lane, North Laverton Vic 3026
Phone (03) 9267 2444 Fax (03) 9369 4826
1300 651 652
bpwtranspec.com.au
NEW SOUTH WALES
10 Squill Place,
Arndell Park NSW 2148
Phone (02) 8811 7000 Fax (02) 8811 7050
QUEENSLAND
10 Bernoulli Street,
Darra Qld 4076
Phone (07) 3217 0877 Fax (07) 3217 0230
WESTERN AUSTRALIA
1021 Abernethy Road,
High Wycombe WA 6057
Phone (08) 9454 4000 Fax (08) 9454 4111