88.9mm x 4.8mm Pipe Production Plant

ES-11202

Technical Data

maker VAI SEUTHE year 1980/89/98 strip width 120 - 285 mm strip thickness 1,5 - 4,8 mm reference material (tensile strength) max. 630 N/mm²

tube- - round tubes 38 - 88,9 mm - square tubes 30 x 30 - 70 x 70 mm - rectangular tubes 40 x 20 - 110 x 30 mm speed max. 120 m/min. working direction right → left available roll sets The line is equipped as follows:

entry part up to strip accumulator not available

forming device design interchangeable plates/linear forming device no. of horizontal stands no. of vertical stands horizontal stands' drive 4 x 46 kW

welding device HF maker Emmedi year 1989 design transistor welding capacity 350 kW outside scrappers 2 pcs. inside scrappers

cooling

calibrating year 1998 design interchangeable plates twist stand 1 pc. horizontal stands (incl. interchangeable set) 8 pcs. vertical stands (incl. interchangeable set) 8 pcs.

calibration stands (incl. interchangeable set) 6 pcs. Turk heads 2 pcs. Drive 3-phase-current motors driving power 7 x 44 kW ratio section width : section height max. 1:4

eddy current testing Krautkrämer

cut-off length measuring metering wheel design interchangeable plates

saw blade- saw blade drive feed control servo drive

runout roller table with accelerator ejector with scrap bucket

stacker Mair

separation

buffer

bundling rectangular/hexagonal

lowering of tube stacks electro-mechanic

hydraulics Rexroth

electrics Siemens year 1998

PLC S5-135U

All technical data are based on supplier’s information and therefore without obligation for us. The machines are subject to prior sale; this offer is subject to our General Terms and Conditions.