88001331 Nonwoven Katalog EN FINAL - Graf...Morel clothing: Clothing height, breast angle, density...

Nonwoven

2

2

High level of reliable manufacturing processes

Graf has become the world's leading supplier thanks to its high-quality products. Graf has been

manufacturing innovative fl at clothings, metallic clothings for cards and roller cards, and combs for

combers since 1917.

As a system supplier, Graf's off er of services covers the entire range, from products and technical

assistance to service and service machinery. In addition, Graf supports its customers with individual

solutions for all application areas. Everything, from profi le wires and carding wires to foundation

material and end products, is manufactured at Graf’s own production facilities in Europe. Thanks

to this indepth vertical integration, the Graf group ensures comprehensive process mastery and

superior quality.

3

Roller card clothing 4

General information on metallic card clothings 6

Steel alloys 9

Border wires 10

Hipro 11

Graf identifi cation code for metallic card clothings 12

Precision in roller card clothings 14

Nonwoven 15

Worsted yarn 20

Semi-worsted yarn 21

Accessories 22

Polishing and cleaning accessories 23

Graf setting gauges 24

Service and quality 25

4

4

Roller card clothing

Clothing types, designed for the widest range of requirements, are available

for processing a variety of raw materials on roller cards. The clothing types

indicated represent a selection from our unbeatably large product range.

For new and further developments, Graf joins forces with the most

renowned manufacturers of roller cards and nonwoven customers.

4

5

Feed rollers, feed roller cleaning rollers and pre-opening rollers

Graf recommends the use of interlinked clothing for these rollers.

Grooved rollers can be trued off for the installation of interlinked

clothings.

Cylinders and doff ers

Graf manufactures optimized clothings for each type of fi ber.

The clothings are continuously adapted to the latest technological

knowledge. Cylinder wires used for the fi ne fi ber and recycling

area are available in special steel alloys.

Workers and stripper clothings

For processing man-made fi bers or blends of man-made fi bers

and wool, the best results are achieved with metallic card clothings.

Specially designed worker clothings with increased fi ber adhesion

are available for processing diffi cult fi bers.

Fancy rollers

Graf provides three types of fancy clothing:

• Standard fancy fi llets

• Zig-zag fancy fi llets

• Fancy sheets

The clothing number of the fancy is determined by the density

of the cylinder clothing. Standard fancy fi llets and fancy sheets

are generally used for fl exible cylinder clothings. They penetrate

the cylinder clothing.

Zig-zag fancy fi llets are used for metallic cylinder clothings;

it is only in exceptional cases that they penetrate the clothing.

The zig-zag fancy fi llet is designed to lift the fi bers in combination

with the air fl ow produced.

Transfer rollers

The transfer roller clothing must be aggressive and sturdy

to ensure correct transport of the fi bers. It is now possible to

use transport brush fi llets to clothe transport rollers for worsted

yarns. These replace the well-known Tampico fi llets that are

installed on the transport rollers, located between the breast

cylinder and Morel roller as well as between the fi rst and

second morel roller.

Morel clothing

This clothing is only used on roller cards for worsted yarn,

and only on elements with burr removers. As a result of the

variable tooth pitch, optimum distribution of the teeth can be

achieved with only one clothing.

Random rollers

Clothings on random rollers are subject to increased wear.

Therefore, Graf also manufacturers the clothings in the

special steel alloy G4 (CUTTYSHARP). With the G4 or CS

(CUTYSHARP) alloy, the lifetime of the random roller clothing

can be increased by up to 30%.

Condenser rollers

Impeccable running properties are achieved with special

shapes and specially polished surfaces.

Take-off rollers

Graf off ers optimized specifi cations with or without polished

surfaces.

Roller card clothing

All Graf card clothings are manufactured according to the ISO 9001 standard.

The following list provides an overview of the key components of the roller card.

Graf recommends using interlinked clothing:

• in the breast section of the roller card

• for safety reasons, particularly for large working widths

and for processing long and coarse man-made fi bers

Graf recommends Hipro clothing:

• on the following rollers: doff ers, workers, strippers and

condenser rollers

• for the highest performance and precision with an

exceptionally long working life in normal profi les or as

interlinked clothing

6

General information on metallic card clothing

Cylinder clothing: Clothing height, breast angle and density

For pre-rollers and breast rollers in the fi ber range > 40 dtex

For pre-rollers and breast rollers in the fi ber range > 12 – 40 dtex

For pre-rollers in the fi ber range 6 – 12 dtex

For fi nisher cylinders in the fi ber range > 17 dtex

For fi nisher cylinders in the fi ber range > 1 – 17 dtex

Depending on raw material specifi cations and roller diameters

Depending on raw material specifi cations

6.0 – 5.5 mm

5.0 mm

4.0 – 3.5 mm

3.2 or 2.5 mm

10 – 20°

32 – 550 p.p.s.i.

Doffer clothing: Clothing height, breast angle, density and shapes

For productions > 25 g/m² and for fi bers > 8.8 dtex

For productions > 25 g/m² and for fi bers < 8.8 dtex



Used for man-made fi bers and blends, particularly for fi bers

with low adhesion, high production rates and heavy web weights

For processing very voluminous, siliconized raw fi ber material

or other fi ber material that is hard to grip (high crimp)

Large capacity to retain fi bers, sturdy teeth, good fi ber adhesion

5.0 mm

4.0 mm

30 – 45°

80 – 500 p.p.s.i.

Clothing with

lateral serration (R)

Clothing with beak-

shape serration (G)

Clothing with arched

tooth shape (B)

Licker-in clothing: Clothing height, breast angle and density

For universal application



7.5 – 5.0 mm

0 – 25°

21 – 80 p.p.s.i.

7


Worker clothing: Clothing height, breast angle, density and shapes

For productions > 25 g/m² and for fi bers > 8.8 dtex

For fi bers < 8.8 dtex




5.0 mm

4.0 mm

30 – 45°

50 – 500 p.p.s.i.

Shapes

Stripper clothing: Clothing height, breast angle, density and special features

For strippers on pre-rollers and breast rollers



For processing all fi ber material and particularly voluminous and

siliconized fi bers or fi bre material with poor adhesion and high

delivery speed (= increased breast angle). Serrated clothing is

used for smooth and fi ne fi bers and for high speeds.


‘Blank hardened’ surface fi nish for fewer deposits of spinning agents

of special fi bers

6.0 – 5.5 mm

5.0 mm

4.0 – 3.2 mm

10 – 40°

32 – 300 p.p.s.i.

Surface

treatment

Clothing for transfer rollers: Clothing height, breast angle, density and shapes

Depending on the pre-roller and position within the roller card

Depending on the pre-roller and position within the roller card



Used for man-made fi bers and blends, particularly for fi bers

with low adhesion and high production rates

5.0 mm

4.0 mm

25 – 30°

70 – 200 p.p.s.i.

Clothing with

lateral serration (R)

8


Random roller clothing: Clothing height, breast angle, density and special features




Increase in life time by up to 30 % with G4 (CUTTYSHARP) alloy

Possible for some specifi cations; shorter and optimized running-in

period with ‘blank hardened’ surface fi nish

3.3 – 2.5 mm

10 – 25°

300 – 550 p.p.s.i.

Special alloy

Surface

treatment

Condenser roller clothing: Clothing height, breast angle, density and special features

Depending on raw materials specifi cations and production

Depending on raw materials specifi cations and production

Depending on raw materials specifi cations

Possible for some specifications; shorter and optimized running-in

period as well as cleaner clothings with ‘blank hardened’ surface finish

4.0 – 6.0 mm

40 – 45°

47 – 170 p.p.s.i.

Surface

treatment

Morel clothing: Clothing height, breast angle, density and special features

Licker-in, breast rollers and Morel rollers

Licker-in, breast roller 40° – Morel rollers 50°


As a result of the variable pitch, the simultaneous mounting of

two wires is no longer necessary.

3.4 mm

40 – 50°

22 – 170 p.p.s.i.

Special features

Take-off rollers: Clothing height, breast angle, density and special features

Standard heights



Also available with Polidur or Needle Finish treatment

4.0 – 3.5 mm

28° negative to

40° negative

90 – 210 p.p.s.i.

Surface

treatment

9

Steel alloys

Depending on the application and demands, GRAF can

supply various alloys. Diff erent steel alloys can be used

depending on the clothing type and area of application.

Surface treatment

Depending on the fi ber material, a choice of surface fi nishes is available. According to the clothing type and area of application,

a special surface treatment might be suitable.

We distinguish between:

• CS (CUTTYSHARP) for the highest demands and

lifetimes for cylinder clothing and random rollers.

• HT steel alloy with special additives. Substantially

increased lifetimes compared to conventional clothing.

Blank hardened

Treated clothing with scalefree surface.

Needle Finish NF

Electrochemical polishing and rounding of all edges on the

clothing teeth.

Polidur treatment

Improved surface fi nish achieved with electrochemical polishing.

The clothing is completely de-burred at the same time.

Smooth Finish SF

Mechanical treatment for smoothing and refi ning the clothing

surfaces. The running-in time is reduced to a minimum, therefore

a consistently high quality is ensured right from the start.

10

Border wires

The selection of the border wire for attaching the clothing depends on the groove width and height of the clothing.

Graf off ers the following types of border wire:

I form

Type h b

Profi le 4,0 x 1,6 4.00 1.60

Profi le 4,5 x 1,5 4.50 1.50

RI-4,5 x 2,0 4.50 2.00

RI-6,0 x 2,0 6.00 2.00

RI-6,5 x 1,5 6.50 1.50

L form Perfekta (antiflock)

Type a b t h

RL-32 x 1,2 2.50 1.20 1.50 3.20

RL-32/1 x 1,0 4.00 1.00 1.50 3.20

RL-50 x 1,0 4.00 1.00 1.50 5.00

RL-65 x 1,5 4.00 1.50 1.80 6.50

L-form for base wire

Type a b c d h t

RL-65/1x1,5 4.00 1.50 2.50 1.00 6.50 1.80

11

Hipro metallic card clothing – increased production and

optimal processing even of critical fi ber types

Thanks to innovative geometries, excellent material and high

quality processing, Hipro metallic card clothing ensures top

class performance and precision together with an exceptionally

long working life.

Hipro metallic card clothing can be used on high-performance

roller card systems as well as on conventional machines, and is

suitable for all standard man-made fi bers in the nonwoven sector,

and also for wool. It is mainly used on the following rollers: doff ers,

workers, strippers and condenser rollers. This excellent, robust

clothing is available as a standard profi le or in an interlinked form.

Customer advantages

• Increased production compared to conventional clothing

• Best processing and combination possibilities

• Improved emptying of the cylinders – the loading risk is thus

signifi cantly reduced

• Less nep formation and fi ber damage

• Reduced fi ber fl y

• Better web appearance with regard to evenness,

in particular for fi ne fi bers

• Optimized variation possibilities regarding web weight

V.H-5045--16 Worker / Doff er 129

V.K-5045--20 Worker / Doff er 215

H-50451X1,0 Worker / Doff er / Condenser roller 206

K-5045-X1,0 Doff er 258

Order no. Roller p.p.s.i. Geometry

V.K-50401--24 Worker / Doff er 258

V.M-40402--28 Worker / Doff er 338

K-50451X1,0 Worker / Doff er 258

K-50452X0,9 Worker / Doff er 286

K-40453X0,9 Worker 286

M-40405X0,9 Doff er 338

M-40406X0,9 Doff er 338

M-40307X0,9 Doff er 338

12

Standard profi les

Tooth pitch

Special shapes

B Arched tooth shape

C Camel (hump shape)

F Flat tooth

G Beak-shaped tooth

M Morel

S Special cut depth

V Lickerin profi le

W Execution with humps

– Standard tooth shape

1-9 Special tooth shape

Graf identifi cation code for metallic card clothing

Special treatment/profiles

Examples:

B Blank hardened

C Serrated profi le + blank hardened

N Needle Finish

P Polidur

Q Serrated profi le + Polidur

R Serrated profi le

S Smooth Finish

V Serrated profi le + Needle Finish

W Serrated profi le + Smooth Finish

Material quality

8 CS (CUTTYSHARP)

– HT (High Tech)

Interlinked

Special shapes

B Arched tooth shape

C Camel (hump shape)

F Flat tooth

G Beaked-shape tooth

M Morel

S Special cut depth

V Licker-in profi le

W Execution with humps

– Standard tooth shape

1-9 Special tooth shape

Special treatment/profiles

Examples:

B Blank hardened

N Needle Finish

P Polidur

Q Serrated profi le + Polidur

R Serrated profi le

S Smooth Finish

V Serrated profi le + Needle Finish

W Serrated profi le + Smooth Finish

Material quality

8 CS (CUTTYSHARP)

– HT (High Tech)

Interlinked profi les

No. of

threads /

inch

Profile height

Breast angle

Base width

Profile height

Breast

angle

T23315-X0,9–S8

Tooth pitch

V .F-5010 1-14-8

13

Examples for points per square inch (p.p.s.i.)

Calculation example for O-3215-X0,9

645

(25.4 x 25.4) 394 p.p.s.i. =

0.9 x 1.813

(Base width in mm x tooth pitch in mm)

Standard profi les p.p.s.i.

V.J23215--28S 275

L-4030-X1,0 278

M-50301X1,0-R 304

L-3215-X0,9 309

M-4040WX0,9-W 338

O-3215-X0,9 394

Interlinked profi les p.p.s.i.

V.E-5010--10 51

V.G-5010--12 85

V.G-5030--18 127

V.K-5040--20R 215

Variable pitch Teeth / linear inch Variable pitch in mm

A1 approx. 1.25 20.024

A2 “ 1.50 15.050

A3 “ 1.75 14.930

B “ 2.00 12.727

B1 “ 2.25 11.000

B2 “ 2.50 10.012

B3 “ 2.75 9.387

C “ 3.00 8.485

C1 “ 3.25 8.000

C2 “ 3.50 7.255

C3 “ 3.75 6.953

D “ 4.00 6.364

D1 “ 4.25 5.867

D2 “ 4.50 5.442

D3 “ 4.75 5.200

E “ 5.00 5.006

E2 “ 5.50 4.470

F “ 6.00 4.242

F2 “ 6.50 3.911

G “ 7.00 3.627

G2 “ 7.50 3.337

H “ 8.00 3.129

H2 “ 8.50 2.980

J “ 9.00 2.828

J2 “ 9.50 2.607

K “ 10.00 2.502

L “ 11.00 2.317

M “ 12.00 2.121

N “ 13.00 1.956

O “ 14.00 1.813

P “ 15.00 1.669

R “ 17.00 1.490

T2 “ 19.50 1.303

No. of threads/inch base width in mm

6 4.20

8 3.17

10 2.54

12 2.10

14 1.80

16 1.60

18 1.40

20 1.20

24 1.00

28 0.90

32 0.80

Graf metallic card clothing can be used on high-performance roller card

systems and conventional machines and is suitable for all standard

man-made fi bers in the nonwoven sector, and also for wool.

Precision in roller card clothings

14

15

Nonwoven

Position Roller ClothingTooth pitch

in mmHeightin mm

Breastangle in °

Base widthin mm

p.p.s.i.

1 Feed roller V.E250-40--8 4.50 5.00 – 40 3.17 46

2 Licker-in V.G-5015--12 3.63 5.00 15 2.10 85

3 Pre-roller V.F-4015--20 4.24 4.00 15 1.20 127

4 Worker / Pre-roller V.G-5040--20R 3.63 5.00 40 1.20 148

5 Stripper / Pre-roller V.G-4030--20 3.63 4.00 30 1.20 148

6 Transfer roller V.G-5030--16R 3.63 5.00 30 1.60 111

7 Cylinder L-3210-X0,9 2.30 3.20 10 0.90 309

8.1 Worker 1 V.H-5040--20R 3.13 5.00 40 1.20 172

8 Workers 2 – 5 K-5040-X0,9-R 2.50 5.00 40 0.90 286

9 Stripper V.K-4030--24R 2.50 4.00 30 1.00 258

10 Top doff er V.K-5040--24R 2.50 5.00 40 1.00 258

11 Bottom doff er V.K-5040--24R 2.50 5.00 40 1.00 258

12 Take-off roller G240-281X1,8-N 3.34 4.00 – 28 1.80 107

16


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Feed roller V.E-6015---8 5.00 6.00 15 3.17 41

2 Licker-in V.E-5015--10 5.00 5.00 15 2.54 51

3 Pre-roller V.G-5015--12 3.63 5.00 15 2.10 61

4 Worker V.H-5045--16 Hipro 3.13 5.00 45 1.60 129

5 Stripper V.H-5045--16 Hipro 3.13 5.00 45 1.60 129

6 Transfer roller V.G-5030--16R 3.63 5.00 30 1.60 111

7 Condenser V.H-5040--20 3.13 5.00 40 1.20 172

8 Cylinder M-2515-X0,8 2.10 2.50 15 0.80 380

9 Worker 1 V.H-5045--16 Hipro 3.13 5.00 45 1.60 129

10 Worker 2 – 5 K-5040GX0,9-R 2.50 5.00 40 0.90 286

11 Stripper V.H-4040--24 3.13 4.00 40 1.00 206

12 Random roller T23320-X0,9--8 1.30 3.30 20 0.90 550

13 Top doff er M-4040-X0,9 2.12 4.00 40 0.90 338

14 Bottom doff er M-4040-X0,9 2.12 4.00 40 0.90 338

15 1st top condenser G-5040GX1,2-S 3.63 5.00 40 1.20 148

16 2nd top condenser H-50452X1,4-S 3.13 5.00 45 1.40 147

17 1st bottom condenser G-5040GX1,2-S 3.63 5.00 40 1.20 148

18 2nd bottom condenser H-50452X1,4-S 3.13 5.00 45 1.40 147

19 Take-off roller G240-281X1,8-N 3.34 4.00 – 28 1.80 107

Nonwoven

17

Nonwoven


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Feed roller V.F-5015--12 4.24 5.00 15 2.10 72

2 Licker-in V.D-5020---8 6.36 5.00 20 3.17 32

3 Pre-roller V.H-4015--20 3.13 4.00 15 1.20 172


5 Worker / Pre-roller V.H-5040G-20R 3.13 5.00 40 1.20 172

6 Stripper / Pre-roller V.G-4040--20 3.63 4.00 40 1.20 148

7 Condensers V.G-4030--16 3.63 4.00 30 1.60 111

8 1st top doff er V.G-5040W-24R 3.63 5.00 40 1.00 178

9 1st bottom doff er V.G-5040W-24R 3.63 5.00 40 1.00 178

10 Top transfer roller V.G-5030--18S 3.63 5.00 30 1.40 127

11 Bottom transfer roller V.G-5030--18S 3.63 5.00 30 1.40 127

12 Cylinder V.J23215--28 2.60 3.20 15 0.90 275

13 Worker V.F-37-10-28S 4.24 3.70 –10 0.90 168

14 Top doff er K-4040-X0,85R 2.50 4.00 40 0.85 301

15 Bottom doff er K-4040-X0,85R 2.50 4.00 40 0.85 301

16 Take-off roller G240-281X1,8-N 3.34 4.00 –28 1.80 107

17 Condenser G-5040GX1,2S 3.63 5.00 40 1.20 148

18 Take-off roller G240-281X1,8-N 3.34 4.00 –28 1.80 107

18

Nonwoven


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Licker-in V.D-6030---8 6.36 6.00 30 3.17 32

2 Worker V.G-5040--16 3.63 5.00 40 1.60 111

3 Pre-roller V.F-5015--18 4.24 5.00 15 1.40 109

4 Stripper V.F-5015--18 4.24 5.00 15 1.40 109

5 Worker V.G-5040--16R 3.63 5.00 40 1.60 111

6 Transfer roller V.G-5030--18 3.63 5.00 30 1.40 127

7 Cylinder V.H-3515--24 3.13 3.50 15 1.00 206

8 Worker V.G-5040--20R 3.63 5.00 40 1.20 148

9 Stripper V.F-5015--18 4.24 5.00 15 1.40 109

10 Doff er V.K-5040--20 2.50 5.00 40 1.20 215

19

Nonwoven


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Feed roller C26010-X1,6 7.26 6.00 10 1.60 56

2 Licker-in V.E-5010---8 5.00 5.00 10 3.17 41

3 Cylinder V.F-4015--20 4.24 4.00 15 1.20 127

4 Worker V.G-5040--20 3.63 5.00 40 1.20 148

5 Stripper V.F-4025--16 4.24 4.00 25 1.60 95

6 Fancy roller Nr.18 tf Gfi

7 Stripper V.F-4015--16 4.24 4.00 15 1.60 95

8 Doff er V.G-5040--20 3.63 5.00 40 1.20 148

9 1st condenser F-5540-X1,3-S 4.24 5.50 40 1.30 117

10 2nd condenser F-5540-X1,6-S 4.24 5.50 40 1.60 95

11 Take-off roller G240-281X1,8-S 3.34 4.00 –28 1.80 107

20

Worsted yarn


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Feed roller V.D-6010---8 6.36 6.00 10 3.17 32

2 Cleaning roller V.D-6010---8 6.36 6.00 10 3.17 32

3 Licker-in DC-3440MX4,0 7.40 3.40 40 4.00 22


5 Pre-roller D-3440MX3,0 6.36 3.40 40 3.00 34

6 Worker / Pre-roller V.F-5040G-10R 4.24 5.00 40 2.54 60

7 Stripper / Pre-roller TAMPICO

8 Transfer roller TAMPICO

9 1st Morell HD23450MX1,4 4.25 3.40 50 1.40 108

10 Transfer roller TAMPICO

11 2nd Morell HD23450MX1,0 4.25 3.40 50 1.00 152


13 Cylinder H-3220-X0,9-S 3.13 3.20 20 0.90 229

14 Worker H-50401X1,0 3.13 5.00 40 1.00 206

15 Stripper J23520-X1,2 2.60 3.50 20 1.20 206

16 Doff er H-5040GX1,0-R 3.13 5.00 40 1.00 206

21

Semi-worsted yarn


in mmHeightin mm

Breast angle in °

Base widthin mm

p.p.s.i.

1 Feed roller V.D-6010---8 6.36 6.00 10 3.17 32

2 Cleaning roller V.D-6010---8 6.36 6.00 10 3.17 32

3 Licker-in V.E-5015--12 5.00 5.00 15 2.10 61

4 Pre-roller V.F-4015--16 4.24 4.00 15 1.60 95


6 Stripper / Pre-roller V.F-4025--16 4.24 4.00 25 1.60 95

7 Transfer roller V.G-50301-16R 3.63 5.00 30 1.60 111

8 Cylinder V.H-3215--20 3.13 3.20 15 1.20 172

9 Worker V.K-5040--20R 2.50 5.00 40 1.20 215

10 Stripper V.F-4025--16 4.24 4.00 25 1.60 95

11 Doff er V.K-5040--20R 2.50 5.00 40 1.20 215

12 Take-off roller G240-281X1,8-S 3.34 4.00 –28 1.80 107

Our tried and tested accessories off er a large selection for all requirements

and ensure correct handling of the card clothing after installation as well as

during subsequent operation of the roller card.

Accessories

22

23

Graf's original accessories for polishing and cleaning the clothings are tried and tested products with a high level of technical design

to ensure highest carding quality.

Polishing sponge with holder

For cleaning metallic card clothings.

CARBORUNDUM

Hand grinding stone with holder

For equalizing newly-mounted

clothings and resharpening.

Hand stripping card with curved

or straight handle

For removing wood and seed coat

particles from metallic card clothings

in cylinder and doff er clothings, and

for general cleaning purposes.

MIRACLO

Hand grinding stone with holder

For removing burrs from faced

metallic card clothings to bridge

the period up to the time the

clothing is replaced.

Bronce wire brush with holder

For cleaning newly-mounted or

resharpened metallic card clothings.

Hand stripping card

Replacement clothing for hand

stripping card without holder.

Pocket microscope

Pocket microscope with illumination

and 30-fold magnifi cation for the

evaluation of the condition of clothing.

Clothing cleaner

For removing persistent wood parts

that cannot be removed with the

hand stripping card.

Polishing and cleaning accessories

24

Setting gauges

In addition to the clothing quality, the settings of the diff erent rollers on the roller card play a vital role in terms of quality.

Graf off ers a wide range of leaf gauges for this purpose.

Single-blade gauges

400 x 45 mm with handle

Blade thickness 0.15 – 0.50 mm

(6, 8, 10, 12, 16 and 20 / 1,000")

Four-blade gauges 300 x 45 mm

Blade thickness 0.125 – 0.30 mm

(5, 7, 10 and 12 / 1,000")

25

As a DIN EN ISO 9001:2015-certifi ed company, we produce

card clothings according to the latest quality assurance

principles. As our customer, you can rely on the consistently

high quality standard of Graf's high-performance clothings

worldwide.

Continuing demands on performance while retaining

consistently high levels of quality pose high requirements

on the products in terms of strain, hardness and stability.

According to these requirements, we continuously

implement improvement measures in everyday operations.

Constant checks, such as the inspection of incoming

goods, material and implementation inspections and

production monitoring form an integral part of our quality

assurance process. Thanks to our own wide range of

facilities, we always retain 100 % control over our

manufacturing processes.

Individual, sustainable solutions

The choice of the right clothing is of key importance to high

productivity, quality and economic effi ciency. The many facets

involved in rollers and specifi c applications in the short staple

and long staple sector require experienced specialists.

Qualifi ed Graf specialists (TKB) competently advise and support

you in selecting the application-specifi c clothings, and work with

you to develop a solution that is in line with the your requirements

and expectations. Long-standing experience in the textile sector

and continuous further education make our specialists the crucial

factors for the success of spinning mills, nonwoven manufacturers

and machine builders.

Today’s cards and roller cards place the highest demands on the

clothings and their maintenance. To ensure trouble-free operation

in the spinning mill /nonwoven manufacturing plant, you can always

call upon our worldwide service network with our qualifi ed service

specialists. This considerably reduces downtimes and the resulting

high costs.

Your quality advantages:

• Worldwide service stations enable on-site dismantling

and fi tting

• Short downtimes thanks to the use of experienced

assembly and service teams

• Rather than standard solutions, we provide custom-made

quality products tailored to your needs

• Our competent support, combined with our high-quality

products make us your ideal fi ber processing partner

Service and quality

26

Notes

27

Notes

Premium Swiss Quality

Graf Kratzen GmbH

Augsburger Strasse 16

86368 Gersthofen

Germany

Phone +49 821 2 49 670

[email protected]

Graf Metallic of America, LLC

104 Belton Drive

Spartanburg, SC 29301

USA

Phone +1 864 576 7450

[email protected]

Graf Holland B.V.

Kratzen- und Maschinenfabrik

Lonnekerbrugstraat 130

PO Box 2201

7500 CE Enschede

Netherlands

Phone +31 53 488 95 88

[email protected]

Graf Cardservice Far East Ltd.

20/Fl. Pearl Oriental House

60 Stanley Street, Central

Hong Kong

Phone +852 2810 09 55 / 56

[email protected]

Graf Máquinas Têxteis Ind. e Com. Ltda.

Alameda Rio Preto, no. 165

CEP 06460-050 Barueri-SP

Brazil

Phone +55 11 4166 4977

[email protected]

Gomitex SA

Zoning Industriel, Haut de Trême

4801 Stembert (Verviers)

Belgium

Phone +32 873 15540

[email protected]

Graf + Cie AG

Bildaustrasse 6

8640 Rapperswil

Switzerland

Phone +41 55 221 71 11

Fax +41 55 221 72 33

[email protected]

www.graf-companies.com

Art. 88001331 / 02.2018 / © by Graf / Subject to modifi cation without prior notice

88001331 Nonwoven Katalog EN FINAL - Graf...Morel clothing: Clothing height, breast angle, density...

Documents

Transcript of 88001331 Nonwoven Katalog EN FINAL - Graf...Morel clothing: Clothing height, breast angle, density...