8200 Liquid Fertilizer Applicator Parts Manual · 8200 Liquid Fertilizer Applicator Parts Manual...

8200 Liquid Fertilizer Applicator Parts Manual

FAST Global Solutions4130 Commerce Boulevard

Windom, MN 56101

General InformatIonAll rights, especially copying and distribution rights are reserved. No part of this publication may be reproduced in any form or by any means, electronic or mechanical, including photocopying, without express written permission from Fast Distributing, Inc.

Parts information in this manual represents components installed when product was manufactured based upon the best available information. Modifications made subsequent to initial delivery are not included. Always verify the parts and color required with Fast Distributing, Inc at 1-800-772-9279.

If you have any questions, please contact your dealer or our Parts and Service Department.

8200 Series Applicator www.fastdist.com3

8200 ApplicatorLimited Warranty

Fast Distributing Inc. warrants to the buyer that the new machinery is free from defects in material and workmanship.

This warranty is only effective as to any new machinery which has not been altered, changed, repaired or treated since its delivery to the buyer, other than by FAST DISTRIBUTING or its authorized dealers or employees, and does not apply to accessories, attachments, tools or parts, sold or operated with the new machinery, if they have not been manufactured by FAST DISTRIBUTING.

FAST DISTRIBUTING shall only be liable for defects in the materials or workmanship attributable to faulty material or bad workmanship that can be proved by the buyer, and specifically excludes liability for repairs arising as a result of normal wear and tear of the new machinery or in any other manner whatsoever, and without limiting the generality of the foregoing, excludes application or installation of parts not completed in accordance with FAST DISTRIBUTING operator’s manual, specifications, or printed instructions.

Written notice shall be given by registered mail, to FAST DISTRIBUTING within seven (7) days after the defect shall have become apparent or the repairs shall have become necessary, addressed as follows:

FAST Global Solutions 4130 Commerce BoulevardWindom, MN 56101.

This warranty shall expire one (1) year after the date of delivery of the new machinery.

If these conditions are fulfilled, FAST shall at its own cost and at its own option either repair or replace any defective parts provided that the buyer shall be responsible for all expenses incurred as a result of repairs, labor, parts, transportation or any other work, unless FAST has authorized such expenses in advance.

The warranty shall not extend to any repairs, changes, alterations, or replacements made to the new equipment other than by FAST or its authorized dealers or employees.

This warranty extends only to the original owner of the new equipment.

Rubber parts (including tires, hoses, grommets) are not warranted.

This warranty is limited to the terms stated herein and is in lieu of any other warranties whether express or implied, and without limiting the generality of the foregoing, excluded all warranties, express or implied or conditions whether statutory or otherwise as to quality and fitness for any purpose of the new equipment. FAST disclaims all liability for incidental or consequential damages.

This Applicator is subject to design changes and FAST DISTRIBUTING INC. shall not be required to retrofit or exchange items on previously sold units except at its own option.

FAST Global Solutions

Warranty void if not registered.

www.fastdist.com 8200 Series Applicator4

8200 Applicator

FAST 8200 Series Applicator

Fast Applicator Serial Number____________-_____________-___________

Date Purchased ______/_______/______

Tank Size__________

Number of Coulters____________

Pump Manufacturer: Ace 205F-304, or Hypro HM1 (circle one)


8200 ApplicatorContents

General InformatIon .................................................................................................. 28200 Cart ................................................................................................................. 68200 Cart - ContInued .............................................................................................. 8axles ....................................................................................................................... 10tIre & rIm................................................................................................................ 12unIts WIth YelloW tanks ........................................................................................ 12unIts WIth WhIte tanks ........................................................................................... 121800 - 2400 tank Parts .......................................................................................... 13Center WInG seCtIon ............................................................................................... 14Inner and outer WInG seCtIon ................................................................................ 16GauGe Wheel ........................................................................................................... 18mountInG ClamP kIt for ausherman Coulter oPtIon .............................................. 19ausherman VantaGe II fertIlIzer Coulter ................................................................ 20Coulter assemblY .................................................................................................... 22knIfe assemblY ........................................................................................................ 248218 - 8224 3 InCh QuICk fIll ................................................................................. 25larGe Cart to tank PlumbInG ................................................................................. 26aCe 205 PumP .......................................................................................................... 27aCe 304 PumP ......................................................................................................... 28hYPro PumP ............................................................................................................ 298218 - 8224 aGItatIon and Control ........................................................................ 30toolbar PlumbInG .................................................................................................... 31larGe Cart PumP to ball ValVe PlumbInG .............................................................. 32raVen sCs450 Console .......................................................................................... 34Control Console harness - 155-0171-085 ............................................................. 35Control Console harness - 155-0159-856 ............................................................. 36Control Console harness - 155-0171-086 ............................................................. 37fold Control Cab box ............................................................................................ 38WIrInG harness ....................................................................................................... 40harness ConneCtor ................................................................................................. 41ValVe harness ......................................................................................................... 42ValVe bloCk ............................................................................................................ 43hYdraulIC dIaGram - fold sYstem ............................................................................ 44hYdraulIC dIaGram - lIft and doWn Pressure ......................................................... 46hose desCrIPtIon .................................................................................................... 48hYdraulIC sYstem for PumP ................................................................................... 49toolbox CarrIer ..................................................................................................... 50kIt Contents .......................................................................................................... 51lIGhtInG .................................................................................................................. 52


8200 Applicator8200 Cart

21

13

1224

28

58

6847

2

25 36

6634

515

3223

4645

6 57

2314

74

73

6249

22

5075

72

59

4

18

41

9

205135

6756

636540

616739

7

19

3342

4364

11

16 29

48

53

10

3227

38

55

16

38

27

6

3071

17

76

77

1

27

28

26

4431

8 60

70

69

52 2054

37

3


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 90SASMV SMV ASSEMBLY 12 102 Bolt, 1/2 X 1” Grade 5 ZP 53 115 Bolt 5/16 X 1” Grade 5 ZP AR4 119 Bolt, 5/16 X 3” Grade 5 ZP 15 122 Bolt, 5/16 X 4-1/2” Grade 5 ZP 26 129 Bolt, 3/8 X 1-1/2” Grade 5 ZP 27 131 Bolt, 3/8 X 2-1/2” Grade 5 ZP 18 154 1/2-13 X 2 19 157 Bolt, 1/2 X 3-1/2” Grade 5 ZP 810 162 Bolt, 1/2 6” Grade 5 ZP AR11 164 Bolt, 1/2 X 7” Grade 5 ZP 212 170 Bolt, 5/8 X 2” Grade 5 ZP 213 171 Bolt, 5/8 X 2-1/2” Grade 5 ZP 614 213 Nut, 3/8” ZP 215 228 Nut, Nylock, 5/16” ZP 216 231 Nut, Nylock, 1/2” ZP AR17 233 Nut, Nylock, 3/4” ZP 118 236 Nut, Centerlock, 5/16” ZP 119 237 Nut, Centerlock, 3/8” ZP 120 239 Nut, Centerlock, 1/2” ZP 821 240 Nut, Centerlock, 5/8” ZP 622 242 Nut, Centerlock, 1” ZP 323 250 Washer, Lock, 3/8” ZP 424 253 Washer, Lock, 5/8” ZP 225 256 1/4” Flat Washer ZP 526 257 Washer, 5/16” ZP 227 258 Washer, 3/8” ZP 628 261 Washer, 5/8” ZP 1429 262 Washer 3/4” ZP 130 390 Bolt, 3/4 X 5-1/2” Grade 8 ZP 131 581 Rivet, 1/4” Drive 132 616 Bolt, 3/8 X 1-1/4” Grade 5 ZP 433 683 Roll Pin, 1/4 X 1-1/2” 134 707 Roll Pin, 3/8 X 2” 135 759 Zerk, 1/4” Straight Pipe 1036 767 Nut, Whiz, 1/4” ZP 537 768 Nut, Whiz, 5/16” ZP AR38 769 Nut, Whiz, 3/8” ZP 439 15158 Pin, Main Lift 240 15159 5” Cylinder Stop 241 15430 Jack Holder Weldment 1


8200 Applicator8200 Cart - ContInued

21

13

1224

28

58

6847

2

25 36

6634

515

3223

4645

6 57

2314

74

73

6249

22

5075

72

59

4

18

41

9

205135

6756

636540

616739

7

19

3342

4364

11

16 29

48

53

10

3227

38

55

16

38

27

6

3071

17

76

77

1

27

28

26

4431

8 60

70

69

52 2054

37

3


8200 ApplicatorItem Vendor Part # Fast Part # Description Qty.

42 15437 3/4” Link Pin 143 15440 Pin, Jack, Removable 144 15480 Transport Rack, Standard AR45 15558 Bracket, Hose 246 15566 Tube, Spacer 247 15810 Hose Holder Weldment 148 15814 Plate, Ball Vale Mount AR49 15829 Plate, Safety Chain Washer 150 15835 DOM, Safety Chain Spacer 151 15848 Pin, Liftarm Casting 152 16892 1800 Gallon Fertilizer Cart AR53 16905 Plate, Bolt Through AR54 18086 Plate, Shim AR55 18397 Mount, Flow Meter 156 18445 Anti Rotation Pin 257 540053 P-Clamp, 4” With .38” Hole 258 590023 1/2” UHMW Hold Down Tab 259 590153 Bolt, 1 X 6-3/4” Grade 5 ZP 260 590170 Plate, Bump 161 590218 Washer, 1-1/4” 14GA ZP 462 590226 1 X 3-1/4” Grade 5 ZP 163 620073 Cylinder, 4 X 10 264 710005 Lynch Pin, 1/4 X 1-3/4” ZP 165 720001 Snap Pin 266 740018 Light Harness Holder 167 750033 5MM X 50MM Spring Pin ZP 668 750048 Manual Holder 169 750051M Upper Liftarm Casting 270 750052M Lower Liftarm 271 790002 Hitch, CAT 4, Bottom 172 790004 Hitch, CAT 4, Top 173 790045 Jack, Jost, 25,000 LB Lifting 174 790046 Handle, Jost Jack 175 790050 Chain, Safety, 30,000 LB 176 800109 Decal, Red Reflector 277 800111 Decal, Orange Reflector 2NS 15300 2400 Gallon Fertilizer Cart ARNS 15485 Transport Rack, 132” Wheels ARNS 590205 3/4” Cylinder Stop 2NS 590206 1” Cylinder Stop 2NS 590207 1-1/4” Cylinder Stop 2NS 590208 1-1/2” Cylinder Stop 2


8200 Applicatoraxles

1

35

2 46

78

9

10

11

12131415

16

17

1819 20

2324

2122

2526

272830

29

31

32

33

This Axle Uses Hub Parts Below: 18-31


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 16695 Axle 60' Side Fold 15000# 120” Wheel Track 1

NS 16888 Axle Single 15000# 88” Wheel Track Optional2 730013 Seal 10 Bolt (906497 CR30087) 23 730054 Cone Inner (910333/39585) 24 1678 Cup Inner (910331/39520) 25 730002 Hub 10 Bolt W/Cups 26 730074 Cup Outer (910332/453A) 27 730012 Cone Outer (910334/460) 28 730018 Washer Spindle (913632) 29 730014 Nut Spindle 1.25-12 TPI 210 730016 Gasket Hub Cap 211 730072 Hub Cap Q-871 Hub 212 113 Bolt Hex Head 5/16 X 1/2 Grade 5 Zp 813 730015 Cotter Pin 214 730051 Nut Wheel (913571) 2015 730045 Stud Wheel (953033) 2016 18430 Axle Single 2400 Gallon 20000# 480/80R50 1.5” Offset Wheel 117 10913 Axle, Spacer Dual, 62 1/2"-120" Wheel Track OptionalNS 10910 Axle, Spacer Dual, 80"-120" Wheel Track OptionalNS 10907 Axle, Spacer Dual, 88"-132" Wheel Track Optional18 730041 Seal NI906979 219 730043 Cone Inner NI910346 220 730012 Cup Inner NI910334 221 730060 Hub 10 Q881 W/Cups 222 1679 Cup Outer NI910384 223 730037 Cone Outer NI0910347 224 730040 Washer Spindle Q9881 225 730038 Hub Cap NI909921 226 113 Bolt Hex Head 5/16 X 1/2 Grade 5 Zp 227 730061 Gasket Hub Cap 228 730056 Nut Castle NI913571 229 730042 Cotter Pin Q881 Hub 230 730051 Nut Wheel NI913571 2031 NI953035 Stud Wheel NI953035 3/4-16 X 3.5” 2032 710010 Spacer Dual 30" Rows WR 20308 13.75” Spacer OptionalNS 710016 Spacer Dual 22" Rows WR 20312 7” Spacer OptionalNS 710014 Spacer Dual 20" Rows WR 20306 5” Spacer OptionalNS 18360 Axle, 72" Spacing, 15,000 Lb ARNS 18174 Axle, 76" Spacing, 15,000 Lb ARNS 16930 Axle, 80" Spacing, 15,000 Lb ARNS 18433 Axle, 132" Spacing, 15,000 Lb ARNS 18435 Axle, 88" Spacing, 20,000 Lb ARNS 17416 Axle, 132" Spacing, 20,000 Lb AR33 16457 Axle Spacer 54” Tire AR


8200 Applicator

Item Vendor Part # Fast Part # Description 8218 82242 TT5123180057201R 700002 380/90R46 LR149 Tire/Wheel Yellow RH 1 2 TT5123180057201L 700003 380/90R46 LR149 Tire/Wheel Yellow LH 11 TT05201140057201L 700087 480/80R50LR176 Tire/Wheel Yellow RH 1 Opt. 11 TT05201140057201R 700088 480/80R50 LR176 Tire/Wheel Yellow LH 1 Opt. 13 TT05193450057201L 700020 380/90R46 LR 149 Tire/Wheel Yellow Dual LH 2 Opt. 2 Opt.3 TT05193450057201R 700021 380/90R46 LR 149 Tire/Wheel Yellow Dual RH 2 Opt. 2 Opt.

unIts WIth YelloW tanks

unIts WIth WhIte tanks

1

2

3

Item Vendor Part # Fast Part # Description 8218 82242 TT5123180040701R 700001 380/90R46 LR149 Tire/Wheel Silver RH 12 TT5123180040701L 700000 380/90R46 LR149 Tire/Wheel Silver LH 11 TT05201140040701L 700085 480/80R50LR176 Tire/Wheel Silver RH 1 Opt. 11 TT05201140040701R 700086 480/80R50 LR176 Tire/Wheel Silver LH 1 Opt. 13 TT05193450040701L 700034 380/90R46 LR 149 Tire/Wheel Silver Dual LH 2 Opt. 2 Opt.3 TT05193450040701R 700035 380/90R46 LR 149 Tire/Wheel Silver Dual RH 2 Opt. 2 Opt.

Consult factory for other tire sizes.

tIre & rIm


8200 Applicator

Item Vendor Part # Fast Part # Description 8218 8224NS 570089 Tank 1800 Gallon Yellow 1NS 570088 Tank 1800 Gallon White 1NS 570091 Tank 2400 Gallon Yellow 1NS 570090 Tank 2400 Gallon White 12 570070 Lid Assembly 1 13 530116 Fitting Tank (BJMBF150200BD)3 530350 Fitting Tank (BJMBF222BD) 1 14 96SASUMP96 Sump Fitting W/Elbow5 530164 3 Inch Polypro Tank Flange Assembly 1 16 510022 Hose 3/4 Flo-Rite Faucet Clear 1 17 530151 3/4 Inch Poly Street Elbow - 90° 1 18 530143 Bushing Reducer 1-1/4 To 3/4'' NPT 1 Used On 10 Gallon Option9 570097 Tank 10 Gallon Rinse Yellow 1 Used On 10 Gallon Option

NS 570092 Tank 10 Gallon Rinse White 1 Used On 10 Gallon Option10 114 Bolt Hex Head 5/16 X 3/4'' Grade 5 Zp 1 Used On 10 Gallon Option11 570038 Tank 2.5 Gallon Rinse Yellow 1 1NS 570044 Tank 2.5 Gallon Rinse White12 228 Hut Hex Nylock Zp 4 413 257 Washer Flat 5/16" Zp 4 414 116 Bolt Hex Head 5/16 X 1-1/2'' Grade 5 Zp 4 415 510025 Hose Overflow 2" 7 Ft 7 Ft16 510023 Burp Tube Pump 18 Ft 18 Ft17 540007 Clamp T Bolt 1 118 530004 1/4" X 1/4" Male Elbow 1 119 530331 2" Vent Cap Without Screen 1 120 530163 2" Poly Tank Fitting 1 121 530051 2" MPT X 2" Hose Shank - 90 1 1

1

3

5

2

4

67

8

9

10

111213, 14

15

16

1718

19

20211800 - 2400 tank Parts


8200 ApplicatorCenter WInG seCtIon

1518

10

32517

4

29

10

23

35

371

198

14

26 16

3321

32

34

36

13

28

11

5

24

9

22

31

20

6

12

2730

2

7

36


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 119 Bolt, 5/16 X 3” Grade 5 ZP 22 133 Bolt, 3/8 X 3-1/2” Grade 5 ZP 23 156 Bolt, 1/2 X 3” Grade 5 ZP 24 158 Bolt, 1/2 X 4” Grade 5 ZP 25 213 Nut, 3/8” ZP 46 216 Nut, 5/8” ZP 47 229 Nut, Nylock, 3/8-16 ZP 28 236 Nut, Centerlock, 5/16” ZP 29 237 Nut, Centerlock, 3/8” ZP 8

10 239 Nut, Centerlock, 1/2” ZP 411 250 Washer, Lock, 3/8” ZP 412 253 Washer, Lock, 5/8” ZP 413 592 Bolt, Carriage, 3/8 X 1” Grade 5 ZP 414 759 Zerk, 1/4” Straight Pipe 215 761 Zerk, 90°1/4” Straight Pipe 416 786 Washer, 1” ID X 14 GA 417 15045 Pin, Main Hinge 218 15155 Pin Latch 219 15169 Wing Kick Cylinder Stop 220 15170 Wing, Joint Wing LH 121 15179 Pin, Latch Cyl Base 222 15238 Plate, Wear 223 15240 Wing, Joint Wing RH 124 15276 Center Section Weldment 125 15277 Stainless Steelwasher 426 15630 Latch Weldment 227 16461 Mount, Hydraulic Block 128 540053 P-Clamp, 4” With .38” Hole 429 540054 P-Clamp, 4” With 0.5” Hole 230 590061 U-Bolt, 5/8 X 7-1/16” X 6-1/2”, ZP 231 590133 Screw, Flat Head, 3/8” X 1-1/4” SS 832 590215 Snap Ring, 2” 433 620026 Cyl, Wing Latch 234 620028 Cylinder, 3 X 12” 235 620041 Cylinder, 4.5 X 10" 236 620072 Pin, Cylinder, 1 X 3-3/8” 637 620076 Pin, Cylinder, 1 X 3-7/8” 2


8200 ApplicatorInner and outer WInG seCtIon

49

28

25

19

8

1

829

3

40

26

820

1

2731

16 3837

15

3

17

8

10 39

2

18

8

1335

22

3621

7

33

24

30

23

34

51132

14

12

6

41

43

4442


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 153 Bolt, 1/2 X 1-1/2” Grade 5 ZP AR2 156 Bolt, 1/2 X 3” Grade 5 ZP 23 157 Bolt, 1/2 X 3-1/2” Grade 5 ZP 44 184 Bolt, 3/4 X 2” Grade 5 ZP 125 213 Nut, 3/8” ZP 146 216 Nut, 5/8” ZP AR7 237 Nut, Centerlock, 3/8” ZP 88 239 Nut, Centerlock, 1/2” ZP AR9 241 Nut, Centerlock, 3/4” ZP 12

10 242 Nut, Centerlock, 1” ZP 211 250 Washer, Lock, 3/8” ZP 1412 253 Washer, Lock, 5/8” ZP AR13 581 Rivet, 1/4” Drive 414 592 Bolt, Carriage, 3/8 X 1” Grade 5 ZP 1415 759 Zerk, 1/4” Straight Pipe 2216 15137 Pin, Flip Wing Linkage 217 15139 Pin, Main Flex 218 15155 Pin, Latch 219 15226 60’ Flip Wing AR20 15232 Linkage Base Weldment 421 15238 Plate, Wear 222 15251 RH Inner Wing Weldment 123 15360 Bolt On Offset AR24 15364 Bolt On Offset For 22” AR25 15380 Wing Extension Weldment AR26 15392 Flip Linkage Weldment 227 15535 Flip Linkage Weldment 228 15537 Linkage Base Weldment 229 15539 Pin, Flip Wing 230 15816 Plate, Light Mount AR31 530282 Bushing 1.5 OD x 1.25 ID X .75 Wide 432 540051 P-Clamp, 2” With 0.38” Hole 633 540052 P-Clamp, 3” With 0.38” Hole 834 590061 U-Bolt, 5/8 X 7-1/16” X 6-1/2” ZP AR35 590110 Pad, Rub, Long 236 590133 Screw, Flat Head, 3/8” X 1-1/4” SS 837 590214 Snap Ring, 1-1/4” 438 590218 Washer, 1 X 1/4 14GA ZP 439 590225 Bolt, 1 X 9.25, Grade 8 ZP 240 620039 Cylinder, 4.5 X 24” 241 620075 Pin, Cylinder, 1-1/4 X 3-7/8” 242 800109 Decal, Red Reflector 243 800110 Decal, Amber Reflector 444 800111 Decal, Orange Reflector 2NS 15082 66’ Flip Wing ARNS 15181 LH Inner Wing Weldment 1


8200 ApplicatorGauGe Wheel

Item Vendor Part # Fast Part # Description Qty.1 216 Nut, 5/8” ZP 42 253 Washer, Lock, 5/8” ZP 43 19055L LH Gauge Wheel Mount AR4 19060L LH Gauge Wheel Arm AR5 19061 Pin, Gauge Wheel Mount 16 590017 Pin, Hitch, 1/8 X 3-1/8” ZP 17 590061 U-Bolt, 5/8 X 7-1/16” X 6-1/2”, ZP 28 700023 Tire, 20.5 X 8 X 10”, Yellow AR9 730026 Hub, 5 Bolt, With Cups 1

10 730030 Nut, Wheel, 1/2” ZP 511 730031 Seal 112 730032 Bearing, Inner, LM67048 113 730033 Pin, Cotter, 905936 114 730034 Washer, 913608 115 730035 Nut, Castle, 912953 116 730036 Bearing, Outer, LM11949 117 730044 Cap, Hub, 909907 1NS 19055R RH Gauge Wheel Mount ARNS 19060R RH Gauge Wheel Arm ARNS 700030 Tire, 20.5 X 8 X 10”, Silver AR

73

2

1

4

5

6

1112 9

10

8

17

13

1514

16


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 804-022C Washer Lock Spring 5/8 42 803-021C Nut Hex 5/8-11 43 804-015C Washer Lock Spring 1/2 24 803-020C Nut Hex 1/2-13 Plt 25 802-091C Hex Bolt 1/2-13 X 1-1/2 Grade 5 26 204-189D 7” Split Bar Clamp 27 806-083C U-Bolt 5/8-11 X 7 1/32 X 7 1/2, Use With 204-228K 27 806-084C U-Bolt 5/8-11 X 7 1/32 X 9 1/2, Use With 204-224K 27 806-131C U-Bolt 5/8-11 X 7 1/32 X 6, Use With 204-243K 28 204-224K 750046 7 X 7” Square Bar Clamp Kit AR

NS 204-228K 750047 7 X 5” Rectangle Bar Clamp Kit AR

mountInG ClamP kIt for ausherman Coulter oPtIon


8200 Applicatorausherman VantaGe II fertIlIzer Coulter

Item Vendor Part # Fast Part # Description Qty.1 807-124C 750026 21” Flat Bar Angled Coulter Shank2 820-181C Vanll 5" Offset Flat Shank RH (Shown)

NS 820-182C Vanll 5" Offset Flat Shank LHNS 804-022C Washer Lock Spring 5/8NS 803-021C Nut Hex 5/8-11 Plt5 802-064C Hex Head Cap Screw 3/4-10 X 2 Grade 56 804-023C Washer Lock Spring 3/47 204-154D Front Shield


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.8 804-025C Washer Flat 3/4 SAE 19 817-051C Swing Arm Bushing 110 204-209H Blade Spring Rod Weldment 111 204-233V Coulter Pivot RH Sub-Assembly (Shown) 1

204-235V Coulter Pivot LH Sub-Assembly 112 200-001D Hub Grease Cap 113 805-017C Pin Cotter 3/16 X 1-3/4 114 803-029C Nut Hex Slotted 7/8-14 115 804-055C Washer Spindle - 7/8 1

822-020C Bearing Cup LM-67010 (Not Shown) 116 822-021C Bearing Cone LM-67048 117 816-009C Oil Seal Double Lip 118 805-063C Pin Cotter 3/32 X 1 Long 119 204-234V Blade Arm RH Sub-Assembly (Shown) 1

204-236V Blade Arm LH Sub-Assembly 120 817-029C Bushing Coulter Casting 121 807-074C Spring 2.25 OD X .5 Coil 122 204-107D Spring Rod Sleeve 1-1/8 OD 123 812-031C Casting Coulter Spring Washer 124 803-025C Nut Hex 3/4-10 Plt Nylock 125 817-084C Parallel Arm Pivot Bushing 126 807-089C Torsion Spring 3/8 Wire RH (Shown) 1

807-090C Torsion Spring 3/8 Wire LH 127 820-093C Single Bevel 18 Coulter Blade 128 802-354C Plow Bolt 1/2-13 X 1-1/2 Grade 5 129 204-145D Coulter Hub 130 804-015C Washer Lock Spring 1/2 131 803-020C Nut Hex 1/2-13 132 802-281C Hex Head Cap Screw 5/8-11 X 2-3/4 Grade 5 133 804-019C Washer Flat 5/8 USS 134 201-141D Wiper Wheel Arm RH (Shown) 1

204-142D Wiper Wheel Arm LH 135 204-153D Wiper Wheel Spacer 136 198-057S 2 x 13 Depth Wheel Assembly 1

822-095C Press Wheel Brg Only 1814-083C Press Wheel Tire Only 1

37 803-013C Nut Lock 3/8-16 Plt 138 801-015C Screw Set Socket Head 1/4-20 (1/2) 139 204-268D Dry Fertilizer Tube Collar 140 816-134C Rubber Pad 141 820-124C Dry Fertilizer Tube RH 1

820-125C Dry Fertilizer Tube LH 142 802-406C RHSNB 3/8-16 (1-3/4 SS) 142 838-482C Decal Gp Planting Components 144 800-001C Grease Zerk Straight 1/4-28 145 800-073C Grease Zerk 1/4-28 X 90° 146 890-580C Vantage II Liquid Insert 147 204-412H 750025 Vanll RH Dry Drop Tube Weldment (shown) 1

204-413H Vanll LH Dry Drop Tube Weldment 1

204-218L 750022 Coulter Vantage II RH (Incl 8-45,47)204-219L 750023 Coulter Vantage II LH (Incl 8-45,47 LH)


8200 ApplicatorCoulter assemblY

32 4 5 7 26 1 39 1

41

01

51

61

71

22

32

42

52

62

03

82

92132343 3353

63

7383

93

14

24

04

44

54

64

1

72

11

34

8

81

91

02

12


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 N369 590005 Casting Clamp 22 N343 750012 1-1/2" Straight Coulter Shank 1

NS N345 750055 1-1/2" Offset Coulter Shank ARNS 750054 1-1/2" Offset Coulter Shank Special 1NS 750053 1-1/2" Offset Coulter Shank Special 13 186 Bolt Hex Head 3/4 X 3 Grade 5 Zp 14 FPC510 Cotter Pin 5/16" X 3 25 N367-1 Clamp Plate 16 FBU6B0 U-Bolt 7 X 8-1/2 X 5/8 E-Coat 27 N347-7 Bushing Nylon For Spring Rod 18 N347-5 Spring Rod 19 S233 Spring Coulter 1

10 N347-3 Spring Bushing Casting 111 233 Nut Hex Head 3/4 Nylock Zp 112 FBH0816-SS 750010 Bolt Hex Head 1/2 X 4 Grade 5 SS 113 FBS0602 750018 Set Screw 3/8 X 1/2" 214 COI100-7 750016 Rock Guard 115 530199 Nipple, Pipe 1/4 X 5 SS 116 530246 Elbow, Street 1/4" NPT SS 1

530188 Hose Shank Check Valve Assembly Items 17-21 117 TJ-4676-22-1/4 Adapter 11/16" X 1/4" NPT 118 TJ-CP4916-250 Orifice Plate 302 SS 119 TJ-CP3655-5-SS Spring 5# 302 SS 120 TJ-CP7671-5/16/SS Ball 302 SS 121 TJ-39189-8400-406-SS Hose Shank 11/16 X 1/4" NPT 303 SS 122 TJ-CP1321-SS 520014 Teejet Body SS 123 TP-00xx-SS Tip SS Teejet (Specify Tip Size) 124 FNJ08-SS 750009 Hut Hex Head Jam 1/2" SS 125 TJ-CP1325SS 750015 Nozzle Cap SS 126 FNJL08-SS 750011 Nut Hex Head Nylock 1/2" SS 127 FNL12-NF Nut Hex Head 3/4" Nf Zp 128 N347-47 Swing Arm W Hub 129 N347-6 Bushing Coulter Flanged 130 N342 750014 Coulter Ripple 20" 131 W40-2 Seal Coulter 2 Piece 132 W32 Bearing 233 W38 Cup 234 FBC0806 Bolt Carriage 1/2" X 1-1/2" Zp 435 W23Y Hub Assembly Complete (Items 31-33,35,37-39) 1

W23 Hub Only 136 FNH08 Nut Hex Head 1/2” Zp 437 W60 Nut Spindle 5/8" 138 FPC497 Pin Cotter 1/8" X 1-1/4" 139 W50 Cap Hub 140 N347-1 Coulter Hinge Casting 141 N347-2 750008 Locking Collar 30° 1NS N347-2/45 Locking Collar 45° OPT.42 FBS1004 Setscrew 5/8" X 1" 143 FPC505 Pin Cotter 1/8" X 1-1/4" 144 FWM18 Bushing 1/8" Thick 145 216 Nut Hex Head 5/8" Zp 446 253 Washer Lock 5/8" 4


8200 ApplicatorknIfe assemblY

Item Vendor Part # Fast Part # Description Qty.1 FBH0813 Bolt Hex Head 1/2 X 3-1/4 Zp Grade 5 12 260 Washer Flat 1/2" Zp 23 155 Bolt Hex Head 1/2 X 2-1/2 Zp Grade 5 14 WI-CO501000 750003 Wiese CO50100 Knife 15 CLN3934 750019 Mounting Bracket And Shim Kit 16 BR-64006H 540011 Clamp Hose 5/16" 47 BS-3/8BH200 510020 Hose EDPM 3/4" X 4'' 18 VI-316A1438 530247 Hose Barb 1/4" MPT X 3/8" Hose 19 VI-304SE14 530246 Elbow Street 1/4" MPT 1

10 39188-8400-406-SS 530188 Valve Check 1/4" MPT X 3/8" Hose 111 BS-3/8BH200 510020 Hose EDPM 3/4" X 54'' 112 18720-112-785-NYB 520004 Tee 3/4" Hose Barb ARNS 18719-111-785-NYB 520003 L 3/4" Hose Barb AR13 CP4916-XX CP4916-XX Orifice Disc 4916-XX See Rate Chart 114 CP18999EPR 590029 Gasket Orifice Disc 115 8400-406-NYB 590077 Hose Shank 3/8" 116 CP25607-1-NY 590076 Cap Nozzle Black 117 215 Nut Hex Head 1/2" Zp 318 252 Washer Lock 1/2" Zp 319 603 Bolt Hex Head 1/2 X 1-3/4'' Zp Grade 5 1

1

3

5

2

4

6

7

8

9 10

11

12

13

14

15

16

17

18

19

6

6

2


8200 Applicator8218 - 8224 3 InCh QuICk fIll

Item Vendor Part # Fast Part # Description Qty.1 MV300CF 500042 Valve, 3” Manifold 12 AP12012810 510004 Hose, 3” Fertilizer 13 300Cap 530023 Cap, 3” 14 300G 530024 Gasket, 3” EPDM 35 HB300-90 530053 3” Hose Barb Elbow 90° 16 M300BRB 530113 3” Manifold X 3” Hose Barb 17 HN7912 530179 Lanyard 18 M300A 530233 3” Manifold X 3” Male Adapter 19 M300CPG45 530234 3” Manifold Coupler, 45° 1

10 FC300 540003 Clamp, 3” 311 TC343 540009 Clamp, 3” T Bolt 2

2

11

115

64 10

1

7

410

9

4

10

8

3


8200 ApplicatorlarGe Cart to tank PlumbInG

Item Vendor Part # Fast Part # Description Qty.1 MV220CF 500006 Valve, 2” Full Port Manifold 12 AP12012805 510003 Hose, 2”, Fertilizer AR3 100G 530013 Gasket, 1” EPDM 14 1BH200 510016 Hose, 1” EPDM AR5 200G 530019 Gasket, 2” EPDM 66 M100BRB 530066 1” Manifold X 1” Hose Barb 17 M220100TEE 530099 2” Full Port Manifold X 1” Flange Tee 18 M220BRB90 530104 2” Full Port Manifold X 2” Hose Barb 90° 29 M200CPG90 530106 2” Full Port Manifold Coupler, 90° 1

10 MLS22230 530125 2” Full Port Line Strainer 111 FC100 540000 Clamp, 1” 112 FC220 540002 Clamp, 2” Full Port 613 TC287 540008 Clamp, 2” T Bolt 214 64016H 540014 Clamp, 1” 215 9306C-HM1C-UB 550011 Pump, Hypro ARNS FMC205FHYD304 550025 Pump, Ace, 205-304 ARNS M300220CPG 530316 3” Manifold Reducer X 2” Coupler ARNS FC300 540003 Clamp, 3” ARNS 300G 530024 Gasket, 3” EPDM AR

12

5

9

125

1

125

7

12

5

81136

144

14

13

2

13812

5

10

12

515


8200 ApplicatoraCe 205 PumP

12

34

56

78

9

10

1213

14

24

21 22 23

15 16

17

18

19

20

2526

11

Item Vendor Part # Fast Part # Description Qty.1 BAC-53 41110 Pipe Plug 41 41120 41120 Pipe Plug, Stainless Steel (Optional) 42 7AC-14-FLG-A 41535 Volute, 300 Standard Flange X 220 Full Port Flange 13 BAC-23-B-SS 40393 Nut, 3/8" Nf, Stainless Steel 14 BAC-24-B-SS 42702 Washer, 3/8", Stainless Steel, Self-Locking 15 BAC-26-200-P 40434 Impeller, With Extended Keyway, Thermoplastic 15 BAC-26-200-CI 40433 Impeller, With Extended Keyway, Cast Iron (Optional) 15 BAC-26-200-SS 40436 Impeller, With Extended Keyway, 316 Stainless Steel (Optional) 16¹ BAC-7SC-205V 40149 Seal, Silicon Carbide 17¹ BAC-4A 40005 O-Ring, Body Seal 18 BAC-14-205-HYD 40338 Mounting Frame For 205 Pump 19 40950 40950 Cap Screw, 3/8" NC X 3/4" Hex Head 49 40930 40930 Cap Screw, 3/8” NC X 3/4” Hex Head, Stainless Steel (Optional) 4

10 41330 41330 Cap Screw, 5/16" NC X 3/4" Hex Head, Motor To Pump 411 BAC-54 41130 Slinger 112 BACH-33 40820 Snap Ring, Internal, BAC-14-205 Mounting Frame 213 BACH-32-HD 40385 Snap Ring, External, BAC-6-205 Shaft 314 40880 40880 Ball Bearing, Sealed, BAC-6-205 Shaft 215 BAC-6-205-HYD-SS 40068 Shaft, Extended Keyway, Tang, Stainless Steel 116 BAC-25 40425 Key, 1/8" X 1/8" X 13/16", Extended Keyway 117 S305 40163 Seal Support Spacer For 205 Series Pump 118 BAC-75-HYD-304N 41343 Hydraulic Motor, 11 GPM, Effective 5/13 119 41875 41875 O-Ring, #8 SAE Fitting 120 41445 41445 O-Ring, #10 SAE Fitting 121 BAC-80-8SAE 41455 Body, Restrictor Orifice, #8 SAE X 1/2" NPT 122 41448 41448 O-Ring, Orifice Insert 123 BAC-79-8 41447 Orifice Insert, Restrictor Insert, 0.125 124 41442 41442 Reverse Check Assembly, #10 SAE X 1/2" NPT 125 LS-304N 41429 Flow Limiter (Optional) 1¹ RK-FMCSC-205 52705 Repair Kit For FMC-205 Pump With Silicon Carbide Shaft Seal# RK-BAC-75-HYD-300-L 41362 Repair Kit For 300 Series Hydraulic Motor


8200 ApplicatoraCe 304 PumP

17

8

16

6

15

13

141211

5

23

4

77

9

1

1313

1412

10

18

1920

2122

24

25

23

Item Model 304N Model 310N Description Qty.1 40162 40162 Seal Support Spacer, S300 For 200 Series Pumps 11 40163 40163 Seal Support Spacer, S305 For 205 Series Pumps 12j 40154 40154 Seal Cartridge, BAC-75-300-TLS 13 43056 43056 Spacer Seal/Bearing, Perforated, 300 Series Motor 14 43205 43205 Retaining Ring, Bearing 25 43225 43225 Ball Bearing 16 43016 43016 Drive Plate 17j 43130 43130 O-Ring, Housing Seal 28 43085 43080 Dowel Pin, Housing 29 43005 43000 Gear Housing 1

10 43277 43277 Cap, Needle Valve With O-Ring, 300N Series Motor 111j 43276 43276 O-Ring, Needle Valve Cap 112 43266 43266 Needle, 300N Series Motor 113 43022 43022 End Plate, 300N Series Motor 114 43185 43180 Cap Screw, 3/8" N.C. Hex Head 415 43240 43240 Retaining Ring, Gear 216 43035 43030 Gear 217 43250 43250 Ball, Idler Shaft 118 43235 43230 Idler Shaft 119 43046 43039 Drive Shaft 120 43195 43190 Dowel Pin, Drive Shaft 121 41455 41455 Body, Restrictor Orifice, #8 SAE x 1/2" NPT 122 41448 O-Ring, Orifice Insert 123 41447 Orifice Insert, Restrictor Insert 124 41875 41875 O-Ring, #8 SAE Fitting 125 41445 41445 O-Ring, #10 SAE Fitting 126 41442 41442 Reverse Check Assembly, #10 SAE x 1/2" NPT 1j 41362 41362 Motor Repair Kit, includes 2, 7, 11


8200 Applicator

1

6

313

1116

9

4

8

10

12

7

5

2

34

3235

25

38

31

24

37

36

33

22

2140

39

43

42

4129

28

20

30

44

23

30

27

26

2

44 3900-0022 GEROTOR 143 3360-0023A ADAPTER-INLET PORT ASSY 142 3320-0052A CHECK VALVE ASSY - TANK PORT 141 3220-0029 VALVE STEM 140 2270-0039 WASHER, FLAT 5/16" 439 2220-0021 SCREW, SOCKET HEAD 438 2104-0010 LIP SEAL 137 2029-0010 BEARING RACE, THRU 236 2029-0009 BEARING, THRUST 135 2000-0010 BEARING, BALL 134 1820-0013 INT. RET. RING 133 1810-0026 RETAINING RING 132 1810-0014 RETAINING RING 131 1720-0268 O-RING 230 1720-0110 O-RING 229 1700-0245 NUT, SEALING 128 1610-0031 HM1 & HM5 Round Key 1

27 1600-0044 DOWEL PIN 126 1600-0037 DOWEL PIN 125 1410-0131 CARTRIDGE, FRONT 124 1410-0130 SPACER, 3L SEAL 123 0700-2500C1 GEROTOR HOUSING HM1, COATED 1

22 0533-2500 SHAFT 121 0254-2500C2 END PLATE ASSY 120 0150-2500C BODY ASSY-SMALL PILOT 119 6031-0373 CE STICKER LABEL 118 6031-0343 INSTRUCTION TAG 117 6031-0340 LABEL READY FOR ROUND UP 116 6031-0325 DECAL 115 3435-0171 PACKING KIT 114 3031-0134 CARTON - INDIVIDUAL 113 2270-0076 TAG 112 2270-0071 IMPELLER WASHER 111 2270-0041 WASHER 110 2253-0002 ALCNUT 0.3750-24-N 19 2210-0020 CAP SCREW, HEX HEAD 3/8"-16 X 7/8" 48 2210-0005 CAP SCREW, HEX HEAD 5/16"-18 X 7/8" 47 2120-0039 SEAL, MECHANICAL 16 1720-0083 O-RING 15 1610-0012 WOODRUFF KEY 14 1410-0056 SLINGER SEAL 13 0750-9300C2 MOUNTING FLANGE 12 0401-9200P2 IMPELLER (CW ROTATION) 11 0158-9200C PUMP HOUSING, 300x220 U.FLG 1

ITEM NO.

PART NUMBER DESCRIPTION QTY. NO. NUMBER DESCRIPTION QTY.ITEM PART

hYPro PumP


8200 Applicator8218 - 8224 aGItatIon and Control

Item Vendor Part # Fast Part # Description Qty.1 1BH200 510016 Hose 1" EDPM AR2 Y9270-PP 520029 Agitation Nozzle 23 Tee075 530156 Tee 3/4" NPT 14 NIP0756 530130 Nipple 3/4" X 6 15 TF075 530160 Bulkhead 3/4" NPT 16 HB07510090 530036 Hose Barb Elbow 3/4" NPT X 1" Hose 17 64016 540014 Clamp 1" Hose 2

*AR* Quantities dependent on # of Ball Valve on unit.

3

5

2

4

6

7

1


8200 Applicator

8

3

1614

1

910

7

17

2

4

15

20

21

1918

22

53

16

13

12

16

3

6

11

12

Item Vendor Part # Fast Part # Description Qty.1 UV075FP 500043 Valve, 3/4” AR2 IBH200 510016 Hose 1” EDPM AR3 3/4BH200 510019 Hose, 3/4”, EPDM AR4 3/8BH200 510020 Hose, 3/8”, EPDM AR5 TJ18719111785NYB 520003 Nozzle, Single AR6 TJ18720112785NYB 520004 Nozzle, Double AR7 HB075100 530039 3/4” MPT X 1” Hose Barb AR8 HB075-90 530040 3/4” MPT X 3/4” Hose Barb 90° AR 9 NIP075-SH 530131 3/4” MPT Short Nipple AR10 TEE075 530156 3/4” FPT Poly Tee AR11 T34100T 530181 3/4” MPT X 1” Hose Barb Tee AR12 3T34F 530220 3/4” FPT X 3/4” Hose Barb Tee AR13 3T34T 530221 3/4” MPT X 3/4” Hose Barb Tee AR14 HB075 530230 3/4” MPT X 3/4” Hose Barb AR 15 640006H 540011 Clamp, 3/8” AR16 64012H 540013 Clamp, 3/4” AR 17 64016H 540014 Clamp, 1” AR 18 64104H 540021 Clamp, 4 1/8 - 7” AR19 CP18999EPR 590029 Seal, EPDM AR20 CP256071NY 590076 Cap AR21 8400406NYB 590077 Connector, Hose Barb AR22 590187 Mount, Plumbing AR

toolbar PlumbInG


8200 Applicator

623

24

6

1246

2462

246

9

284

28

12

25

7

29

25

7

12

28

428

13

157

25

322

20 5

31

16

725

147

27

2517

725

30725

257

21

11

278

1927

820

527

10

larGe Cart PumP to ball ValVe PlumbInG


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 MPRV100100 500004 Valve. 100PSI Relief 12 MV100CF 500005 Valve, 1” Full Port AR3 451BEC-3FB 500028 1 Valve Manifold AR4 11/2BH200 510014 Hose, 1-1/2” EPDM AR5 1BH200 510016 Hose, 1” EPDM AR6 100G 530013 Gasket, 1” EPDM AR7 150G 530014 Gasket, 1-1/2” EPDM AR8 200G 530019 Gasket, 2” EPDM AR9 M100BRB 530066 1” Manifold X 1” Hose Barb AR

10 M100BRB90 530067 1” Manifold X 1” Hose Barb 90° 111 M100PLG 530070 1” Manifold Plug AR12 M200150BRB 530079 2” Manifold X 1-1/2” Hose Barb AR13 M200150BRB90 530080 2” Manifold X 1-1/2” Hose Barb 90° 114 M200CPG45 530087 2” Flange Coupler, 45° AR15 M200PLG 530093 2” Manifold Plug 116 M200PLG025 530094 2” Manifold Plug W/ 1/4” FPT 117 M200TEE 530097 2” Manifold Tee 118 M220100TEE 530099 2’ Full Port Manifold X 1” Flange Tee AR19 M220150BRB 530100 2” Full Port X 1-1/2” Hose Barb AR20 CP45523-NYB 530190 1” 90° Hose Barb, Nylon AR21 CP37166-1-302SS 530193 Retaining Clip AR22 CP7717-3-912-VI 530198 O-Ring, Viton AR23 M100TEE 530298 1” Manifold Tee 124 FC100 540000 Clamp, 1” AR25 FC200 540001 Clamp, 2” AR26 FC220 540002 Clamp, 2” Full Port AR27 64016H 540014 Clamp, 1” AR28 64024H 540016 Clamp, 1-1/2” 429 0630171793 631804 Flow Meter, 60P AR30 0630171894 631805 Control Valve, 1-1/2” 131 FAST4154GXX160 790020 Gauge, 160PSI 1

NSS 0630171066 631801 Flow Meter, 100P AR


8200 ApplicatorraVen sCs450 Console

ITEM DESCRIPTION RAVEN PART #1 Manual Adj. Switch 412-2011-0492 Rate1/Rate2/Manual Switch 019-0159-0783 Power Switch 412-2011-0484 Boom Switch 412-2003-0105 Master Switch 412-2011-0466 Mounting Bracket 106-0159-4377 Mounting Knob 106-0159-4388 Fuse Holder 510-2001-0189 Fuse, 15 Amp. 510-1003-00310 Console Control Cable (10 ft.) 115-0159-492

Console Control Cable (3 ft.) 115-0159-70711 Flow Control Cable (6 ft.) 115-0159-495

Flow Control Cable (12 ft.) 115-0159-496Flow Control Cable (24 ft.) 115-0159-708

12 Flow Meter Cable Ext. (6 ft.) 115-0159-016Flow Meter Cable Ext. (12 ft.) 115-0159-017

13 Flow Ext. Cable (12 ft.) 115-0159-493Flow Ext. Cable (24 ft.) 115-0159-494

14 Assorted Terminal Kit 117-0159-40215 Switch Cover 063-0159-73416 1-Set Filler Spacers 117-0159-42117 Face Plate Assembly 063-0172-02418 Display Board Spacer 107-0159-47819 LCD Display Board 063-0171-96120 Processor Board (Serial Interface) 064-0159-74521 Connector Plate Assembly (Serial Interface) 063-0172-02222 Back Assembly 063-0159-53023 SCS 450 Console (Serial Interface) 063-0171-220


8200 Applicator

Control Console harness - 155-0171-085


8200 Applicator

Control Console harness - 155-0159-856


8200 ApplicatorControl Console harness - 155-0171-086


8200 Applicatorfold Control Cab box


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 210-710 STR RLF Heyco .23 - .53 ID Hole Dia .886 12 212-184 Screw 6-32 x 3/8 Oval HD Blk 23 212-202 Insert 6-32 x 3/8 Brass 24 212-215 Knob 1/4-20 Female 25 212-231 Screw, Welded 1/4-20 x .500 26 213-335 Washer Nylon .257 x .875 x .060 27 214-002 Cable Tie Black 7'' 38 219-300 Bracket Housing Monitor 19 230-057 Bag Poly Clear 14 x 18 2 Mil W/Logo 1

10 232-050 Decal S/N Silver 211 232-059 Decal Gold/Black 1.5 x .5 112 250-013 SW TOG DPDT 3P MOM Long 313 250-015 SW TOG DPDT 2P MOM Short 114 250-023 SW TOG Boot OPN Grey 415 252-058 Wire 18 Ga Black 18''16 252-059 Wire 18 Ga Black 24''17 252-060 Wire 18 Ga Black 18''18 252-001 Diade D116A2 6 Amp 119 255-002 TRM T-Tap F PO Blue 1020 255-006 Trm PO F Non Ins 20/18 Ga 521 255-070 Trm PO MF 14-16 Ga 222 255-119 Trm PO F Ins 16-14 Ga 523 255-285 Trm Splice Closed End Large 124 259-015 SW TOG Grip Vinyl Blue .187 125 259-022 SW TOG Grip Vinyl Yellow .187 126 259-023 SW TOG Grip Vinyl Green .187 127 259-027 SW TOG Grip Vinyl Grey .187 128 304-037 ENCL Drill FP Monitor SW4 F00204 129 314-217 Harness R/B Wire Series 3 P/8 130 319-725 ENCL Drill MNTRBX FH-7/8'' STR RLF 131 319-769 Fuseholder PM Assm. 10A /.5' 132 320-184 HRN 12 Con 16 Ga DTP Key A 12P (12) 11’ End Cap 1


8200 ApplicatorWIrInG harness

Item Vendor Part # Fast Part # Description Qty.1 230-250 Shrink Tubing .250 Black 2''2 252-021 Wire Red/Black 16 Ga Zip 8'3 255-043 Center 16 Pin Shell #17 14 255-233 Center Amp Socket 15 255-549 Center Series 3 17-3 Plug 1


8200 Applicatorharness ConneCtor

Item Vendor Part # Fast Part # Description Qty.1 231-009 Shrink Tubing .500 Black 1''2 252-058 Wire Black 18 Ga 12''3 252-064 Cable 12 Con 18 Ga PVC Grey 11'4 255-214 Conn Duet Lock Wedge 12 Pin DTR 15 255-215 Center Lock Wedge 12 Pin DTR 16 255-755 Conn Duet DT RCPT 12 Pin Key A 17 255-756 Conn Duet DT Plug 12 Pin Key A 18 255-977 Conn Duet Pin 16-18 Ga 29 255-978 Center Duetsch Socket 16/18 Ga. 12

10 255-979 Conn Duet Cavity Plug 10


8200 ApplicatorValVe harness

Item Vendor Part # Fast Part # Description Qty.1 212-025 Bolt 5/16-18 x 0.75 12 214-002 Cable Tie Black 113 255-026 Loom Clamp .5'' ID Metal/Rubber 14 302-468 Manifold Assembly 15 304-039 Harness Assembly 23' 1


8200 ApplicatorValVe bloCk

Item Vendor Part # Fast Part # Description Qty.1 210-017 610097 Ftg 6801-8-8 E-MJ-MO 12 210-023 610034 Ftg 6804-04-06-04 63 210-038 Ftg 6408-HHP-8/Holl Hex Plug Mo 14 210-126 Ftg 6408-HHP-4 Holl Hex Plug Mo 25 210-127 Ftg 6408-HHP-6 Holl Hex Plug Mo 16 210-141 Ftg 6409-8-9/E-MO-FJSW 17 232-050 Decal S/N Silver 68 232-058 Decal Gold/Black 1.5 x .5 19 253-046 Coil Hydac 0312600 Dl Dstch Recpt. 2

10 253-421 630037 Coil H/F 4301892 0-10 Intg Deut DTR 12v 1.67A Diode 111 270-092 Block M11204-2 804 112 271-034 Check Valve Von 1908-8-8/S-MJ-MJ 113 273-008 Cart Sv10-40-0-N-00 114 273-012 Cart Cp10-20 115 273-077 Cart Hy WS08W-01-C-N-0 Bi Dir Pop 2/2 N 116 610074 6804-06-06-06 1

9

15

10

13

4

4

2 2 2 16

2 2 2 5

1

9 159 159 15

9 159 159 15

8 11

12

6

14

3


8200 ApplicatorhYdraulIC dIaGram - fold sYstem


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 PA600042-27 Hose Hydraulic See Page 48 For Spec's 12 PA600040-11 Hose Hydraulic See Page 48 For Spec's 13 610029 Fitting Adapter 6801-04-08 84 670213 620039 Cylinder Flip Wing (MI670213) 45TD24-200 2

NS MI648472 Seal Kit For 620039 Cylinder AR5 PM10003 620026 Cylinder Latch (PMI0003) 3004-150 2

NS PMRKWP30153BPS Seal Kit For 620026 Cylinder AR6 648990/671378 620028 Cylinder Wing Swing (MI648990) 30TD12-112 2

NS 661727 661727 Seal Kit For 620028 Cylinder AR7 610039 Fitting Adapter RST 6801-04-08-R0.032 48 610034 Fitting Adapter 6804-4-6-4 69 FV302-468 Block Hydraulic (Part Of 630027 Block And Cab Box Kit) 110 PA600042-15 Hose Hydraulic See Page 48 For Spec's 111 PA600042-32 Hose Hydraulic See Page 48 For Spec's 112 PA600042-13 Hose Hydraulic See Page 48 For Spec's 113 PA600042-30 Hose Hydraulic See Page 48 For Spec's 114 PA600042-28 Hose Hydraulic See Page 48 For Spec's 115 PA600042-29 Hose Hydraulic See Page 48 For Spec's 116 PA600042-16 Hose Hydraulic See Page 48 For Spec's 117 PA600063-1 Hose Hydraulic See Page 48 For Spec's 118 PA600042-31 Hose Hydraulic See Page 48 For Spec's 119 PA600064-2 Hose Hydraulic See Page 48 For Spec's 120 PPA600064-4 Hose Hydraulic See Page 48 For Spec's 121 PA600042-26 Hose Hydraulic See Page 48 For Spec's 122 FDM 0049 Hose Hydraulic See Page 48 For Spec's 123 PA600034-2 Hose Hydraulic See Page 48 For Spec's 224 PA600064-1 Hose Hydraulic See Page 48 For Spec's 125 ROUTING INFO Hose Item 24 To Down Pressure Valve Port 326 ROUTING INFO Hose Item 23 To Tractor Pressure27 ROUTING INFO Hose Item 23 To Tractor Return28 ROUTING INFO Hose Item 17 To Down Pressure Valve Port 329 ROUTING INFO Hose Item 19 To LH Wing Kick Rod End30 ROUTING INFO Hose Item 20 To RH Wing Kick Rod End31 Right Hand Side32 Left Hand Side33 610074 Fitting Adapter 6804-6-6-6 134 610108 Fitting Adapter 2406-06-08 135 610053 Fitting Adapter 6602-08-08-08 136 610107 Fitting Adapter 6600-08-08-08 1


8200 ApplicatorhYdraulIC dIaGram - lIft and doWn Pressure


8200 Applicator

Item Vendor Part # Fast Part # Description Qty.1 PA600064-4 Hose Hydraulic See Page 50 For Specs 12 PA600042-2 Hose Hydraulic See Page 50 For Specs 13 610024 Fitting Hydraulic 6500-8 JIC Elbow 14 610027 Fitting Hydraulic 6602-6-6-6 Tun Tee 15 610072 Fitting Hydraulic 2406-8-6 JIC Expander 16 610053 Fitting Hydraulic 6602-8-8-8 Run Tee 17 610004 Fitting Hydraulic 2603-8-8-8 JIC Tee 18 PA600042-33 Hose Hydraulic See Page 50 For Specs 19 PA600064-5A Hose Hydraulic See Page 50 For Specs 110 610029 Fitting Hydraulic 6801-4-8 Elbow Adapter 211 670214 620042 Cylinder Hydraulic 45TD10-150 MI670214 212 610050 Fitting Hydraulic RST6801-4-8-R0.060 90° 213 645947 620014 Cylinder Hydraulic 40TD10-150 MI645947 214 PA600042-4 Hose Hydraulic See Page 50 For Specs 115 PA600042-2 Hose Hydraulic See Page 50 For Specs 116 610011 Fitting Hydraulic 6400-6-8 Adapter 417 PA600064-2 Hose Hydraulic See Page 50 For Specs 118 PA600064-3 Hose Hydraulic See Page 50 For Specs 119 610030 Fitting Hydraulic 6801-8-6 90° 120 630041 Down Pressure Block 121 790052 Gauge Pressure 0-3000 122 PA600064-1 Hose Hydraulic See Page 50 For Specs 123 610013 Fitting Hydraulic 6400-8-8 JIC To Orb Adapter 124 610026 Fitting Hydraulic 6602-4-4-4 Run Tee25 610085 Fitting Hydraulic 6803-8-8-8 Orb To JIC Tee 126 500049 Valve Counterbalance 127 610029 Fitting Hydraulic 6801-4-8 JIC To Orb 90° 128 610049 Fitting Hydraulic 6801-4-6 JIC To Orb 90° 129 610053 Fitting Hydraulic 6602-8-8-8 Run Tee 130 PA600063-1 Hose Hydraulic See Page 50 For Specs 131 PA600042-1 Hose Hydraulic See Page 50 For Specs 132 PA600042-34 Hose Hydraulic See Page 50 For Specs 133 PA600042-3 Hose Hydraulic See Page 50 For Specs 134 ROUTING To Port C5 On Folding Valve Block35 ROUTING To Tractor Remote #1 Pressure36 ROUTING To Tractor Remote #1 Return37 INFO Right Hand Side38 INFO Left Hand Side39 610009 Fitting Hydraulic Adapter 6400-8-4 140 610096 Fitting Hydraulic One Way R0.047 2


8200 Applicator

Part # Description Hose Size 1st End 2nd End Cut Hose Qty.600040-11-ZN FDM4R17-4FJXZ-4FJX90MZ 1/4" F St. F 90 219" 1600042-13-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 94" 1600042-15-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 98" 1600042-16-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 64" 1600042-26-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 183" 1600042-27-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 238" 1600042-28-ZN FDM4R17-4FJXZ-4FJX90MZ 1/4" F St. F 90 86" 1600042-29-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F St. 52" 1600042-30-ZN FDM4R17-4FJXZ-4FJX90MZ 1/4" F St. F 90 64" 1600042-31-ZN FDM4R17-4FJXZ-4FJX90MZ 1/4" F St. F 90 70" 1600042-32-ZN FDM4R17-4FJXZ-4FJX90MZ 1/4" F St. F 90 93" 1600064-1-ZN FDM8R17-8FJX90MZ-8FJXZ 1/2" F. 1/2" 90 F 1/2" St. 26" 1600064-2-ZN FDM6R17-8FJXZ-8FJXZ 3/8" F 1/2" St. F 1/2" St. 93" 1600064-3-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F.1/4" St. F 1/4" St. 84" 1600064-4-ZN FDM6R17-8FJXZ-8FJXZ 3/8" F 1/2" St. F 1/2" St. 117" 1600064-5-ZN FDM4R17-4FJX90MZ-4FJXZ 1/4" F 1/4" 90 F 1/4" St. 109" 1FDM 0049-ZN FDM4R17-4FJXZ-4FJXZ 1/4" F St. F 90 201" 1600042-1-ZN FDM8R17-8MBOZ-8FJXZ 1/2" #8 O-RING F St. 195" 2600034-2-ZN FDM6R17-8MBOZ-6FJXZ 3/8" #8 O-RING F St. 340" 2600042-2-ZN FDM6R17-6FJX90MZ-8FJXZ 3/8" F. 90 F 1/2" St. 62" 2600042-3-ZN FDM6R17-6FJX90MZ-8FJXZ 3/8" F. 90 F 1/2" St. 73" 1600042-4-ZN FDM6R17-6FJX90MZ-8FJXZ 3/8" F. 90 F 1/2" St. 51" 1600063-1-ZN FDM6R17-6FJXZ-8FJXZ 3/8" F. 3/8" St. F 1/2" St. 152" 1600042-33-ZN FDM6R17-6FJXZ-6FJXZ 3/8" F. St. F St. 150" 1600042-34-ZN FDM4R17-6FJXZ-4FJXZ 1/4" F 3/8" F St. 7" 1

hose desCrIPtIon


8200 ApplicatorhYdraulIC sYstem for PumP

Item Fast Part # Description 8218 82241 2-NV12-12SAE Hose Tip 2 22 PA600054-1 Hose Pressure To Valve 1 13 610086 Hydraulic Fitting 6801-8-10 1 14 610099 PC Valve 13 GPM5 PA600054-2 Hose Pressure To Pump 1 16 610106 Hydraulic Fitting 6400-10-10 1 17 610102 Hydraulic Fitting 6801-10-10 1 18 PA600054-3 Hose Pump Return 1 1

1 23

5

4

67

8

1


8200 Applicator

1

3

5

2

4

6

Item Fast Part # Description Quantity1 18426 Toolbox Holder 12 155 Bolt Hex Head 1/2 X 2-1/2: Grade 5 Zp 13 790041 Grab N Go Toolbox 14 239 Nut Hex Head 1/2" Centerlock Zp 15 223 Nut Hex Head 1/2" Jam Zp 16 152 Bolt Hex Head 1/2 X 1: Grade 5 Zp 1

toolbox CarrIer


8200 Applicator

Item Fast Part # Description InjectorQuantity

KnifeQuantity

520003 3 Nozzle, Single Hose Shank Nyb 3 2520004 Nozzle, Double Hose Shank Nyb 2520005 Nozzle, Single Hs Conn 1/4" F 2520006 Nozzle, Double Hs Conn 1/4"F 2 3520014 Nozzle, SS 1/4" Tee 1520015 Nozzle, SS CA 1520034 Tip, SS - 0015 Teejet 2530001 1/4" X 1/4" Male Connector 1 1530014 1-1/2" EDPM Gasket 2 2530019 2" EDPM Gasket 2 2530024 3" EDPM Gasket 2 2530188 Hose Shank Assembly 1530201 Barb Hose 1/4" X 3/8" 4530218 3/8" X 3/8" Hose Mender W/ Stop 2530236 Nipple:1/4" MPTX6" MPT 1530246 Str. Elb:1/4" Mptx1/4" FPT 1540001 Clamp, 2" Std Worm Screw 1 1540002 Clamp, 2" Full Worm Screw 1 1540003 Clamp, 3" Worm Screw 1 1540006 Clamp 1-1/2" T-Bolt Hose 1.81" 2 2540013 Clamp, Stainless 3/4" #12 10 5540014 Clamp, Stainless 1" #16 4540032 Clamp, Hose 5/16" 4590029 Seal, EDPM Rubber 3590030 Cap Q.T. Ny.Lt.Yellow 3590031 Plate Orifice, Stainless Steel 3750008 Locking Collar, Std 30° 2 2750016 Rock Guard With Pin 1750018 3/8 X 1/2" Set Screw, Ss 2750019 Mounting Bracket F/Wiese CO-50 Knife 1790041 20" Deep Grab & Go Toolbox 1 1AC40015 O-Ring, Volute Seal 1AC40151 Seal, 5/8" Shaft, Viton-C 1AC52700 Repair Kit 1AP44103202 1/4 X 1/4" Union Connector 3 3AP44103240 1/4 X 1/4" Female Adaptor 1 1AXGC30020XXL XXL Green Gloves 1 1LAXNVGOGGLESL Goggles 1 1BJ200SHIM 2" Shim 2BJHM075 3/4" X 3/4" Hose Barb 2 2BJHM100 1" X 1" Hose Barb 2 2BJHM150 1-1/2" X 1-1/2" Hose Barb 1 1CLFBS1004 5/8 X 1 Square Head Set Screw 2PL707TB Reduran 1 1WA21047 Cable Tie, 15" Heavy Duty 20 20VI3K9438 Barb:3/8" Hb For 8027 Nut-Poly 3

kIt Contents


8200 Applicator

lIGhtInG

29

1

5

43

7

6

8

Item Vendor Part # Fast Part # Description Qty.1 104 Bolt, 1/4 x 2'' Grade 5 Zp 12 235 Nut, Centerlock, 1/4'' Zp 13 249 Washer, Lock, 5/16'' Zp 44 590229 Bolt, 8 X 20 mm 8.8 Zp 45 740023 Applicator Light Wiring Harness 16 740024 Amber Warning Light 27 740025 Red Tail Light 28 740029 Extension 29 740031 Light Module 1


8200 Applicator

Notes

Part Number 991 8200 Applicator Parts Manual 16/11/2018

FAST Global Solutions4130 CommerceBoulevard

Windom, MN 561011-800-772-9279 Toll Free

1-507-427-3861 Voice1-507-427-3030 Fax

8200 Liquid Fertilizer Applicator Parts Manual · 8200 Liquid Fertilizer Applicator Parts Manual...

Documents

Transcript of 8200 Liquid Fertilizer Applicator Parts Manual · 8200 Liquid Fertilizer Applicator Parts Manual...