8/,1. 3&,H 66' 3RZHU $GDSWHU 3OXVulinktech.com/wp-content/uploads/2015/07/PSPA-Plus-r3.0.pdf8/,1....

2
ULINK 3120 D Santa ULINK PC Features Suppo Curre Voltag Curre Voltag Meas Less th The PCIe-SSD Power Adapter P the PCIe-SSD Power Adapter ( power consumption during d simple script instructions provi K Technology Inc. De La Cruz Blvd., #117 Clara, CA 95054 Tel: 408.446.8455 Email: contact@uli www.ulinktech.com CIe-SSD Power Adap orts all PCIe voltages: 12v, 3.3v and 3.3v Aux ent Range: 0 - 4A ge Range: 0 - 40 V ent Resolution: 0.2 mA ge Resolution: 20 mV sure both Power Voltage and Power Current han 0.1 V voltage drop in the power path Plus (PSPA+) adds power consumption measure (PSPA). With this integrated adapter, users can different power states: active, idle, no opera ided by ULINK DriveMaster without extra hardw inktech.com m Rev. 3.0 Feb 2017 pter Plus ement on top of n easily measure ational, etc. via ware.

Transcript of 8/,1. 3&,H 66' 3RZHU $GDSWHU 3OXVulinktech.com/wp-content/uploads/2015/07/PSPA-Plus-r3.0.pdf8/,1....

Page 1: 8/,1. 3&,H 66' 3RZHU $GDSWHU 3OXVulinktech.com/wp-content/uploads/2015/07/PSPA-Plus-r3.0.pdf8/,1. 7HFKQRORJ\ ,QF 'H /D &UX] %OYG 6DQWD &ODUD &$ 8/,1. 363$ 7KLV FKDUW SORWV WKH SRZHU

ULINK Technology Inc.3120 De La Cruz Blvd., #117Santa Clara, CA

ULINK PCIe

Features Supports all PCIe voltages: 12v, 3.3v and 3.3v Aux Current Range: 0 Voltage Range: 0 Current Resolution: 0.2 mA Voltage Resolution: 20 mV Measure both Power Voltage and Power Current Less than 0.1 V voltage drop in the power

The PCIe-SSD Power Adapter Plusthe PCIe-SSD Power Adapter (PSPA)power consumption during different power states: simple script instructions provided by ULINK DriveMaster without extra

ULINK Technology Inc. 3120 De La Cruz Blvd., #117 Santa Clara, CA 95054

Tel: 408.446.8455 Email: [email protected]

PCIe-SSD Power Adapter Plus

Supports all PCIe voltages: 12v, 3.3v and 3.3v Aux Current Range: 0 - 4A Voltage Range: 0 - 40 V Current Resolution: 0.2 mA Voltage Resolution: 20 mV Measure both Power Voltage and Power Current Less than 0.1 V voltage drop in the power path

Plus (PSPA+) adds power consumption measurement on top of SSD Power Adapter (PSPA). With this integrated adapter, users can easily measure

power consumption during different power states: active, idle, no operationalsimple script instructions provided by ULINK DriveMaster without extra hardware

Email: [email protected] www.ulinktech.com

Rev. 3.0 Feb 2017

SSD Power Adapter Plus

power consumption measurement on top of . With this integrated adapter, users can easily measure

active, idle, no operational, etc. via ardware.

Page 2: 8/,1. 3&,H 66' 3RZHU $GDSWHU 3OXVulinktech.com/wp-content/uploads/2015/07/PSPA-Plus-r3.0.pdf8/,1. 7HFKQRORJ\ ,QF 'H /D &UX] %OYG 6DQWD &ODUD &$ 8/,1. 363$ 7KLV FKDUW SORWV WKH SRZHU

ULINK Technology Inc.3120 De La Cruz Blvd., #117Santa Clara, CA

ULINK PSPA

This chart plots the power consumption for the power states supported by NMVe device. The measurement is based on the NVMe same workload, Power State 0 consumes the highest power and takes the shortest time to complete.

This chart displays the influence of performance about 100 seconds, the temperature reaches tcurrent/IOPS starts to throttle to keep the temperature from rising higher.

ULINK Technology Inc. 3120 De La Cruz Blvd., #117 Santa Clara, CA 95054

Tel: 408.446.8455 Email: [email protected]

PSPAPlus Application

This chart plots the power consumption for the power states supported by an NMVe device. The measurement is based on the NVMe specification. With the same workload, Power State 0 consumes the highest power and takes the shortest

This chart displays the influence of performance on the device temperature. In about 100 seconds, the temperature reaches the threshold (77 degree C) and the current/IOPS starts to throttle to keep the temperature from rising higher.

Email: [email protected] www.ulinktech.com

Rev. 3.0 Feb 2017

Application

specification. With the same workload, Power State 0 consumes the highest power and takes the shortest

the device temperature. In he threshold (77 degree C) and the