800W Fuel Cell Power Module - AVID Group › wp-content › uploads › 2018 › 09 ›...
Transcript of 800W Fuel Cell Power Module - AVID Group › wp-content › uploads › 2018 › 09 ›...
800W Fuel Cell Power ModuleLightweight power module for UAVs and other portable applications
Data sheet
Fuel Cell Engineering
Intelligent Energy is a fuel cell engineering company focused on the development and commercialisation of its PEM fuel cell technologies for a range of markets including automotive, stationary power and UAVs. We are headquartered in the UK, with additional offices and representation in the US, Japan, India and China.
Intelligent Energy provides a unique solution to extend flight times to drones presently constrained by the limitations of batteries.
Flight durations of over three times that provided by batteries have been achieved and fuel cells provide a natural solution for manufacturers moving to larger drones and heavier payloads.
Intelligent Energy’s air cooled fuel cell systems run on hydrogen and ambient air to produce clean DC power in a simple, cost-effective, robust and lightweight package. They have a higher energy to mass ratio than battery based systems and can be refuelled in a few minutes.
Please contact us for availability and pricing.
Applications
• Survey and inspection• Search and rescue• High quality aerial photography• Precision agriculture• Parcel delivery• Warehouse inventory• Law enforcement• Military• Robotics• Portable power
Maximum continuous power 800W
Maximum peak power 1400W
Output voltage 19.6V to 25.2V
Fuel Cell Power Module Dimensions 196 × 100 × 140mm
Mass 880g
Hydrogen Regulator Mass 250g
Maximum regulator (cylinder) pressure 300 Bar/4350 PSI
Output pressure 0.5 Bar ± 0.25 Bar/7 PSI ± 3 PSI
PRV set pressure 2 Bar/29 PSI
Burst disc set pressure 450 Bar/6500 PSI
Maximum cylinder mass 10kg
Hybrid battery1 Dimensions 120 × 35 × 40mm
Mass 300g
Capacity 1800mAh
Emergency flight time 2 minutes
Environmental operating conditions Operating temperature 5 to 35°C2
Maximum altitude 3000m
Storage temperature -10 to 70°C
System lifetime 1000 hrs
Safety features Automatic failure detection system and backup battery
FCPM has been designed in accordance with CE and FCC certification
Other features Internal data storage for firmware update, performance and diagnostics SD card
Communication port; to UAV fuel cell power module or accessories UART
Output electrical connector XT-60
800W UAV fuel cell power module specifications
For more information about our products visit our website: www.intelligent-energy.com
To find out how you could benefit from longer flight times, arrange a meeting with a sales representative in your region by emailing: [email protected]
© Intelligent Energy Limited 2018. All Rights Reserved. The Intelligent Energy name, logo, and other trade brands/names referenced herein are trademarks or registered trademarks of Intelligent Energy Ltd or its group companies.
Disclaimer: The information contained in this publication is intended only as a guide and is subject to change as a result of the constant evolution of Intelligent Energy’s business and its technology. This publication and its contents (i) are not definitive or contractually binding; (ii) do not include all details which may be relevant to particular circumstances; and (iii) should not be regarded as being a complete source of information. To the fullest extent permitted by law, Intelligent Energy offers no warranty as to the accuracy of the content of this publication, shall not be liable for the content of this publication and no element of this publication shall form the basis of any contractual relationship with a third party or be used by any third party as the basis for its decision to enter into a contractual relationship with Intelligent Energy. Published by: Intelligent Energy Ltd, Charnwood Building, Holywell Park, Ashby Road, Loughborough LE11 3GB (Registered in England with company number: 03958217). Printed August 2018. All information correct at time of going to print.
1 Currently estimated figures 2 It may be possible to widen the operating temperature envelope depending on customer power requirements.