8.0 NON-MnDOT PRICE SCHEDULE SANDER · 8.001 9900782 1ASD-6CDSS-6P-1D-1S-SM complete sander (Per...

Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer1.0 FALLS 1ASD-6

2.0

Stainless Steel Undertailgate type, 6" dia (carbonsteel) 6" pitch, single auger,direct hydraulic drive, LHDischarge w/POLY self-leveling spinner assembly,Dual over-center locks onhopper cleanout door, mtgbrackets and mtg tabs forhopper, In Stainlesss Steel

3.0 24 months from “In-Service” date

SEE TABLE BELOW

8.001 9900782 1ASD-6CDSS-6P-1D-1S-SM complete sander (Per Ea) $ 3,894.00 10 or More in Single Order (Per Ea) $ 3,766.00

8.002 9900787 1ASD-6CDSS-6P-1D-2S-SM sander, dual spinner, w/uni-directionalreversible auger (Per Ea) $ 4,789.00

10 or More in Single Order (Per Ea) $ 4,632.00

8.003 9900791 1ASD-6CDSS-6P-1D-1S-LM "Salt Special" complete sander,includes extra salt shield (Per Ea) $ 4,886.00


8.004 99009961ASD-6CDSS-6P-1D-2S-LM "Salt Special" sander, dual spinner,w/uni-directional reversible auger, includes extra salt shields (PerEa)

$ 5,781.00


8.005 9905142 1ASD-6CDSS-6P-1D-1S-LM INSET DISCHARGE "Salt Special"complete sander, includes extra salt shield (Per Ea) $ 5,280.00

8.006 9904994 1ASD-6CDSS-6P-2D-2S 6" stainless steel unit split dual drive augerLH & RH Discharge (Per Ea) $ 9,712.00

Spec # Part # Description Price8.1 SEE TABLE BELOW

Type of Sander

Warranty Information

TOTAL PRICE:

List Volume Discounts

8.0 NON-MnDOT PRICE SCHEDULE SANDER

Installation of Sander

Towmaster Truck EquipmentTim Erickson, Tom Gertgen, or Jerry Valiant61381 US HWY 12

Litchfield, MN [email protected] -or- [email protected] -or- [email protected]

Information RequestedSander - Make and Model

8.101 9901718 Install sander w/dual manifold at RH & LH rear corners, withstandard couplers $ 787.00

8.102 9901720 Install sander w/dual manifold at RH & LH rear corners, with driplesscouplers $ 957.00

8.103 9901722 Install sander dual spinner w/uni-directional reversible auger, w/dualmanifolds at RH & LH rear corners, with std couplers $ 1,104.00

8.104 9901724 Install sander dual spinner w/uni-directional reversible auger, w/dualmanifolds at RH & LH rear corners, w/dripless couplers $ 1,039.00

OTHER OPTIONS8.4 9900823 Exterior (removable) sander/tailgate spill plates, Stainless Steel $ 374.00 8.6 9901348 Exterior (bolt-on) sander/tailgate spill plates, Stainless Steel $ 314.00 8.7 9900781 Prep & Adapt Sander for existing body or for ship-out $ 614.00 8.8 1917108 Stainless steel (optional) salt shield $ 35.00 8.9 1962617 TMTE adjustable roller sander stand $ 914.00

Cost per Loaded Mile for Delivery of Sander 2.00$ Starting Point: City, State, Zip: Litchfield, MN 55355

Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer1.0 FALLS 1ASD-9

2.0

Stainless Steel Undertailgate type, 9" dia (carbonsteel) 6" pitch, single auger,direct hydraulic drive, LHDischarge w/POLY self-leveling spinner assembly,RH berm chute assembly,Dual over-center locks onhopper cleanout door, mtgbrackets and mtg tab


4.0 TOTAL PRICE: See Table Below

8.001 9900800 1ASD9SS-6P-1D-1S (6" pitch auger) complete sander (Per Ea) 4,616.00$ 10 or More in Single Order (Per Ea) 4,463.00$

8.002 9901725 1ASD9SS-6P-1D-2S (6" pitch auger) uni-directional reversible,w/dual spinners sander (Per Ea) 5,511.00$

10 or More in Single Order (Per Ea) 5,329.00$

8.003 9900805 1ASD9SS-4P-1D-1S (4" pitch auger) complete sander (Per Ea) 4,964.00$ 10 or More in Single Order (Per Ea) 4,800.00$

8.004 9900999 1ASD9SS-4P-1D-2S (4" pitch auger) uni-directional reversiblew/dual spinners sander (Per Ea) 5,859.00$

10 or More in Single Order (Per Ea) 5,666.00$






Information Requested




Sander - Make and Model

Type of Sander




Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer

1.0Swenson STCC Cross-

Conveyor

2.0

14" wide hi-temp belt overchain, hinged 7 ga top cover,w/2 positive latches to allowmaterial dump over. Dual10" x 14" feed gates withgate jacks, 102" troughopening. 24" extension tohelp position matl outside oftire path. Mtg hdwe &stabilizer kit


8.0 1921318 TOTAL PRICE: 7,361.00$

4.04.1 N/A


8.101 9901728 Install Cross Conveyer w/Light Bar $ 1,210.00 8.102 9901729 Install Cross Conveyer w/Light Bar & Reversing Valve $ 1,735.00 8.103 9901730 Install Cross Conveyor w/Light bar & Dripless Couplers $ 1,405.00

8.104 9901731 Install Cross Conveyor w/Light bar, Reversing Valve, & DriplessCouplers $ 1,939.00

OTHER OPTIONS8.2 9900829 Reversing valve for STCC (ship out) $ 637.00 8.3 9900830 Self storage legs (ship out) $ 2,785.00

8.4 9902481 Sander Swenson 4' MOTORIZED EXTENSION POWDER COATEDBLACK (ship out) $ 4,050.00







Type of Sander




Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer

1.0Swenson SADS-6

STAINLESS STEEL

2.0

Under tailgate type, 6" diasingle auger w/continuousflighting, to discharge atextreme left end. Discharges6.0 lbs/revolution. Directdrive motors. 18" POLYspinner assemblyw/stabilizer arm.


8.0 9900816 TOTAL PRICE: 3,989.00$

4.04.1 N/A













Type of Sander




Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer

1.0Swenson SBDS-9

STAINLESS STEEL

2.0

Stainless Steel Undertailgate type, 9" dia singleauger w/continuous flighting,to discharge at extreme leftor right end. Includes bermchute for RH or LH.Discharges 21.0lbs/revolution. Direct drivemotors. 18" POLY LHspinner assemblyw/stabilizer arm.


8.0 9900819 TOTAL PRICE: 4,926.00$

4.04.1 N/A













Type of Sander




Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer

1.0Swenson Stainless Steel

EV-100 Series

2.0

EV-100 series: hydraulicdrive spreader manufacturedof 10 gauge carbon steelsides/ends, 82” wide hopperends, 7gauge slottedlongitudinals for easygearbox/drive shaft removal,45° side slope, bolt in 6”wide flange H beam, Drop-N-loc top screens, self cleaningpintle style conveyor chain,rear chain wiper, 12”adjustable in height spinnerextension, lower spinnerassembly with bottommounted motor, 7 ga 20”carbon steel spinnerassembly, & 50:1 ratio gearbox. 8 tooth sprockets, w/1-1/2” drive & 1-1/4"idler


Optional Features included in the sanders listed below

Front bearing grease extension to rear

manifold; Chain Oiler - Gravity type - Stainless Steel, 1 gal, with Cap;

Swing up Spinner; Winch for Swing-up Spinner;

Inverted Vee; Low temp Belt over Chain.

TOTAL PRICE: SEE TABLE BELOW

4.04.1 N/A

Spec # Part # Description Price8.001 9904173 Sander Swenson SS EV100-8-82-50 Sander Complete 17,829.00$ 8.002 9904174 Sander Swenson SS EV100-9-82-50 Sander Complete 18,330.00$






Type of Sander



8.003 9904175 Sander Swenson SS EV100-10-82-50 Sander Complete 18,688.00$ 8.004 9904176 Sander Swenson SS EV100-11-82-50 Sander Complete 19,307.00$ 8.005 9904177 Sander Swenson SS EV100-12-82-50 Sander Complete 19,933.00$ 8.006 9904178 Sander Swenson SS EV100-13-82-50 Sander Complete 20,651.00$ 8.007 9904179 Sander Swenson SS EV100-14-82-50 Sander Complete 21,369.00$ 8.008 9904180 Sander Swenson SS EV100-15-82-50 Sander Complete 21,987.00$ 8.009 9904181 Sander Swenson SS EV100-8-82-56 Sander Complete 17,970.00$ 8.010 9904182 Sander Swenson SS EV100-9-82-56 Sander Complete 18,505.00$ 8.011 9904183 Sander Swenson SS EV100-10-82-56 Sander Complete 18,956.00$ 8.012 9904184 Sander Swenson SS EV100-11-82-56 Sander Complete 19,582.00$ 8.013 9904185 Sander Swenson SS EV100-12-82-56 Sander Complete 20,117.00$ 8.014 9904186 Sander Swenson SS EV100-13-82-56 Sander Complete 20,827.00$ 8.015 9904187 Sander Swenson SS EV100-14-82-56 Sander Complete 21,545.00$ 8.016 9904188 Sander Swenson SS EV100-15-82-56 Sander Complete 22,255.00$ 8.017 9904189 Sander Swenson SS EV100-8-82-62 Sander Complete 18,146.00$ 8.018 9904190 Sander Swenson SS EV100-9-82-62 Sander Complete 18,688.00$ 8.019 9904191 Sander Swenson SS EV100-10-82-62 Sander Complete 19,131.00$ 8.020 9904192 Sander Swenson SS EV100-11-82-62 Sander Complete 19,758.00$ 8.021 9904193 Sander Swenson SS EV100-12-82-62 Sander Complete 20,384.00$ 8.022 9904194 Sander Swenson SS EV100-13-82-62 Sander Complete 21,094.00$ 8.023 9904195 Sander Swenson SS EV100-14-82-62 Sander Complete 21,813.00$ 8.024 9904196 Sander Swenson SS EV100-15-82-62 Sander Complete 22,531.00$

OTHER OPTIONS

8.025 9904996 Sander Swenson HYDRAULIC SPRAY SYSTEM FOR V-BOX TANKS ANDMOUNTING NOT ICLUDED

2,756.00$

8.026 9904197 Sander Swenson SS 1-90 GAL V-BOX TANK OPTIONS 1,341.00$ 8.027 9904198 Sander Swenson SS 2-90 GAL V-BOX TANK OPTIONS 1,803.00$ 8.028 9904199 Sander Swenson SS 1-135 GAL V-BOX TANK OPTIONS 1,496.00$ 8.029 9904200 Sander Swenson SS 2-135 GAL V-BOX TANK OPTIONS 2,140.00$ 8.030 9904205 Sander Swenson SS 1-225 GAL V-BOX TANK OPTIONS 1,777.00$ 8.031 9904206 Sander Swenson SS 2-225 GAL V-BOX TANK OPTIONS 2,402.00$

8.032 9904207 Sander Swenson 1 V-BOX TANK SYSTEM FACTORY INSTALLED 328.00$

8.033 9904208 Sander Swenson 2 V-BOX TANK SYSTEM FACTORY INSTALLED 368.00$ 8.034 9904217 Sander Swenson PPS II system - G2 COMPLETE 00002-612-02 6,187.00$ 8.035 9904218 Sander Swenson G2 controls, cables, spinner chute 00002-608-02 5,250.00$ 8.036 9904219 Sander Swenson G2 metering wheel 00002-610-02 1,137.00$ 8.037 9904220 Sander Swenson Aviation Spinner Assembly 5,170.00$ 8.038 9904221 Sander Swenson Light Bar with Stop, Turn, Tail Lights 00118-195-01 1,420.00$ 8.039 9904222 Sander Swenson Light Bar with Stop, Turn, Tail and Flashing Lights 0 1,453.00$ 8.040 9904223 Sander Swenson Light Bar with Stop, Turn, Tail and Strobe Lights 00 1,670.00$ 8.041 9904224 Sander Swenson Light Bar with Stop, Turn, Tail and Back Up Lights 0 1,587.00$ 8.042 9904225 Sander Swenson 4" Pedestal Mount Work Light 00002-261-04 142.00$

8.1 SEE TABLE BELOW8.100 9901732 Install V-Box (as Slide-In) into Dump Body 1,248.00$ 8.101 9901733 Install V-Box as rigid frame mount on chassis 1,467.00$

8.102 9901734Install V-Box on A-FRAME for Hooklift application NOTE: See 1.0 Body Options for A-Frame pricing 1,467.00$



Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer


EVA-100 Series

2.0

EVA-100 series: SINGLEAUGER hydraulic drivespreader manufactured of 10gauge carbon steelsides/ends, 84” wide hopperends, 7gauge slottedlongitudinals for easygearbox/drive shaft removal,45° side slope, bolt in 6”wide flange H beam, Drop-N-loc top screens, self, 7"diameter hard surfacedauger with 3 pitch lengths foreven unloading front to back,•Direct drive 18 HP hydraulicmotor, 12" adjustable inheight spinner extension, 1internal baffle, 4 baffle (3adjustable, front fixed) lowerspinner assembly withbottom mounted motor. Reargrease extension, Invertedvee, Powder coated OmahaOrange, or Stainless Steel



4.04.1 N/A

Spec # Part # Description Price8.001 9903183 Swenson EVA100-10-48 V-Box Complete 10,547.00$ 8.002 9903184 Swenson EVA100-11-48 V-Box Complete 10,989.00$ 8.003 9903185 Swenson EVA100-12-48 V-Box Complete 11,348.00$ 8.004 9903186 Swenson EVA100-13-48 V-Box Complete 11,974.00$ 8.005 9903187 Swenson EVA100-14-48 V-Box Complete 12,868.00$






Type of Sander



8.006 9903188 Swenson EVA100-10-54 V-Box Complete 10,630.00$ 8.007 9903189 Swenson EVA100-11-54 V-Box Complete 11,164.00$ 8.008 9903190 Swenson EVA100-12-54 V-Box Complete 11,440.00$ 8.009 9903191 Swenson EVA100-13-54 V-Box Complete 12,150.00$ 8.010 9903192 Swenson EVA100-14-54 V-Box Complete 12,952.00$ 8.011 9903193 Swenson EVA100-10-60 V-Box Complete 10,814.00$ 8.012 9903194 Swenson EVA100-11-60 V-Box Complete 11,256.00$ 8.013 9903195 Swenson EVA100-12-60 V-Box Complete 11,616.00$ 8.014 9903196 Swenson EVA100-13-60 V-Box Complete 12,242.00$ 8.015 9903197 Swenson EVA100-14-60 V-Box Complete 13,136.00$ 8.016 9903198 Swenson EVA100-10-48 STAINLESS STEEL V-Box Complete 15,190.00$ 8.017 9903199 Swenson EVA100-11-48 STAINLESS STEEL V-Box Complete 15,817.00$ 8.018 9903200 Swenson EVA100-12-48 STAINLESS STEEL V-Box Complete 16,443.00$ 8.019 9903201 Swenson EVA100-13-48 STAINLESS STEEL V-Box Complete 17,186.00$ 8.020 9903202 Swenson EVA100-14-48 STAINLESS STEEL V-Box Complete 17,796.00$ 8.021 9903203 Swenson EVA100-10-54 STAINLESS STEEL V-Box Complete 15,458.00$ 8.022 9903204 Swenson EVA100-11-54 STAINLESS STEEL V-Box Complete 16,084.00$ 8.023 9903205 Swenson EVA100-12-54 STAINLESS STEEL V-Box Complete 16,619.00$ 8.024 9903206 Swenson EVA100-13-54 STAINLESS STEEL V-Box Complete 17,337.00$ 8.025 9903207 Swenson EVA100-14-54 STAINLESS STEEL V-Box Complete 18,047.00$ 8.026 9904841 Swenson EVA100-15-54 STAINLESS STEEL V-Box Complete 18,765.00$ 8.027 9903208 Swenson EVA100-10-60 STAINLESS STEEL V-Box Complete 15,633.00$ 8.028 9903209 Swenson EVA100-11-60 STAINLESS STEEL V-Box Complete 16,259.00$ 8.029 9903210 Swenson EVA100-12-60 STAINLESS STEEL V-Box Complete 16,803.00$ 8.030 9903211 Swenson EVA100-13-60 STAINLESS STEEL V-Box Complete 17,605.00$ 8.031 9903212 Swenson EVA100-14-60 STAINLESS STEEL V-Box Complete 18,314.00$ 8.032 9903213 SWENSON UP CHARGE SINGLE AUGER TO DUAL AUGER 2,387.00$

OTHER OPTIONS

8.033 9904996Sander Swenson HYDRAULIC SPRAY SYSTEM FOR V-BOX TANKS ANDMOUNTING NOT ICLUDED 2,756.00$







Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer


EVDA-17-66 Aviation Special

2.0

EVDA-17-66, DUAL AUGERhydraulic drive spreadermanufactured of 12 gaugeSTAINLESS steel sides/ends,84” wide hopper ends,7gauge slotted longitudinalsfor easy gearbox/drive shaftremoval, 45° side slope, boltin 6” wide flange H beam,DUAL 7" diameter hardsurfaced auger with 3 pitchlengths for even unloadingfront to back, DUAL Directdrive 18 HP hydraulicmotors, AVIATION SPINNERsystem, 2-135 GAL LiquidTANKS W/STAINLESS STEEL MOUNTING HARDWARE


9904947 TOTAL PRICE: 29,191.00$

4.04.1 N/A


8.100 9901732 Install V-Box (as Slide-In) into Dump Body 1,248.00$ 8.101 9901733 Install V-Box as rigid frame mount on chassis 1,467.00$








Type of Sander




Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer


EV-150 Series

2.0

EV-150 series: hydraulicdrive spreader manufacturedof 10 gauge carbon steelsides/ends, 82” wide hopperends, 7gauge slottedlongitudinals for easygearbox/drive shaft removal,45° side slope, bolt in 6”wide flange H beam, Drop-N-loc top screens, self cleaningpintle style conveyor chain,rear chain wiper, 12”adjustable in height spinnerextension, lower spinnerassembly with bottommounted motor, 7 ga 20”carbon steel spinnerassembly, & 50:1 ratio gearbox. 8 tooth sprockets, w/2”drive & idler shafts, w/spring



4.04.1 N/A

Spec # Part # Description Price8.001 9900831 Sander Swenson SS EV150-8-82-50 Sander Installed 17,829.00$ 8.002 9900832 Sander Swenson SS EV150-9-82-50 Sander Installed 18,330.00$ 8.003 9900833 Sander Swenson SS EV150-10-82-50 Sander Installed 18,688.00$ 8.004 9900834 Sander Swenson SS EV150-11-82-50 Sander Installed 19,307.00$ 8.005 9900835 Sander Swenson SS EV150-12-82-50 Sander Installed 19,933.00$ 8.006 9900836 Sander Swenson SS EV150-13-82-50 Sander Installed 20,651.00$ 8.007 9900837 Sander Swenson SS EV150-14-82-50 Sander Installed 21,369.00$ 8.008 9900838 Sander Swenson SS EV150-15-82-50 Sander Installed 21,987.00$ 8.009 9900839 Sander Swenson SS EV150-8-82-56 Sander Installed 17,970.00$ 8.010 9900840 Sander Swenson SS EV150-9-82-56 Sander Installed 18,505.00$


Type of Sander







8.011 9900841 Sander Swenson SS EV150-10-82-56 Sander Installed 18,956.00$ 8.012 9900842 Sander Swenson SS EV150-11-82-56 Sander Installed 19,582.00$ 8.013 9900843 Sander Swenson SS EV150-12-82-56 Sander Installed 20,117.00$ 8.014 9900844 Sander Swenson SS EV150-13-82-56 Sander Installed 20,827.00$ 8.015 9900845 Sander Swenson SS EV150-14-82-56 Sander Installed 21,545.00$ 8.016 9900846 Sander Swenson SS EV150-15-82-56 Sander Installed 22,255.00$ 8.017 9904209 Sander Swenson SS EV150-8-82-62 Sander Installed 18,146.00$ 8.018 9904210 Sander Swenson SS EV150-9-82-62 Sander Installed 18,688.00$ 8.019 9904211 Sander Swenson SS EV150-10-82-62 Sander Installed 19,131.00$ 8.020 9904212 Sander Swenson SS EV150-11-82-62 Sander Installed 19,758.00$ 8.021 9904213 Sander Swenson SS EV150-12-82-62 Sander Installed 20,384.00$ 8.022 9904214 Sander Swenson SS EV150-13-82-62 Sander Installed 21,094.00$ 8.023 9904215 Sander Swenson SS EV150-14-82-62 Sander Installed 21,824.00$ 8.024 9904216 Sander Swenson SS EV150-15-82-62 Sander Installed 22,531.00$

Optional Features included in the sanders listed above

Front bearing grease extensionto rear manifold; Chain Oiler -Gravity type - Stainless Steel, 1gal, with Cap; Swing upSpinner; Winch for Swing-upSpinner; Inverted Vee; Lowtemp Belt over Chain.

OTHER OPTIONS

8.025 9904996Sander Swenson HYDRAULIC SPRAY SYSTEM FOR V-BOX TANKS ANDMOUNTING NOT ICLUDED 2,756.00$








Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer

1.0HI-WAY Stainless Steel

2020XT

2.0 V-BOX SPREADERStandard 82" wide "easy service" body is constructed of a 10-gauge hopperand stakes with 7-gauge longsills and bolt-in replaceable conveyor bottompanel. (Stainless steel units are constructed of a 12-gauge hopper and stakeswith 10-gauge conveyor bottom panel and longsills.)Equipped with 2 hydraulic motors. One motor is mounted to the gear case; the othermotor provides power to the spinner disc. No other hydraulic components areincluded. 24" wide roller-type chain conveyor with 3/8" X 1-1/2" crossbars. Thisconveyor is driven by a 6:1 reduction spur gear drive with a hi-torque/low-speed hydraulic motor (highest efficiency-98% for lower operational andmaintenance cost).Fully enclosed spinner hopper with two internal deflectors and a 20" diameterhydraulically driven spinner disc with six bolt-on harden fins and four baffles designed for complete control of material application.Prior to painting, all components are chemically cleaned. Upon completion ofthe cleaning process, all exposed seams not welded are chemically sealed. Allcomponents are then double coated with a lead- and chrome-free plural-component epoxy primer. Bolt-on components are painted Hi-Way blackurethane, oven-cured and assembled. 304 stainless steel units are unpainted(non-304 stainless steel components are painted black).All units are topped with a black decal group.Note: For proper operation, hydraulic system requires 15-18 GPM at 1500 PSIfor series system, and 20-25 GPM at 1500 PSI for dual system.



4.04.1 N/A

Spec # Part # Description Price

8.001 9905333 HI-WAY STAINLESS STEEL V-BOX 9' 2020XT - (4.7 cubic yard struck capacity) 13,657.00$









Type of Sander






8.008 9905340 HI-WAY STAINLESS STEEL V-BOX 16' 2020XT- (8.6 cubic yard struck capacity) 18,329.00$

Options included in the sanders listed above

Front bearing grease extensionto rear; Front Idler adjustment tothe rear; Auto Oiler; PolySpinner; & Swing up SpinnerAssembly

OTHER OPTIONS8.101 9905349 HI-WAY E2020XT/E2500 6" integrated side extensions SS 9' 694.00$ 8.102 9905350 HI-WAY E2020XT/E2500 6" integrated side extensions SS 10' 782.00$ 8.103 9905351 HI-WAY E2020XT/E2500 6" integrated side extensions SS 11' 782.00$ 8.104 9905352 HI-WAY E2020XT/E2500 6" integrated side extensions SS 12' 829.00$ 8.105 9905353 HI-WAY E2020XT/E2500 6" integrated side extensions SS 13' 863.00$ 8.106 9905354 HI-WAY E2020XT/E2500 6" integrated side extensions SS 14' 924.00$ 8.107 9905355 HI-WAY E2020XT/E2500 6" integrated side extensions SS 15' 930.00$ 8.108 9905356 HI-WAY E2020XT/E2500 6" integrated side extensions SS 16' 950.00$ 8.109 9905357 HI-WAY E2020XT/E2500 12" integrated side extensions SS 9' 970.00$ 8.110 9905358 HI-WAY E2020XT/E2500 12" integrated side extensions SS 10' 1,005.00$ 8.111 9905359 HI-WAY E2020XT/E2500 12" integrated side extensions SS 11' 1,058.00$ 8.112 9905360 HI-WAY E2020XT/E2500 12" integrated side extensions SS 12' 1,091.00$ 8.113 9905361 HI-WAY E2020XT/E2500 12" integrated side extensions SS 13' 1,152.00$ 8.114 9905362 HI-WAY E2020XT/E2500 12" integrated side extensions SS 14' 1,207.00$ 8.115 9905386 HI-WAY E2020XT/E2500 12" integrated side extensions SS 15' 1,738.00$ 8.116 9905387 HI-WAY E2020XT/E2500 12" integrated side extensions SS 16' 1,792.00$ 8.117 9905363 HI-WAY 2020XT/E2500 Inverted V SS 9' 687.00$ 8.118 9905364 HI-WAY 2020XT/E2500 Inverted V SS 10' 687.00$ 8.119 9905365 HI-WAY 2020XT/E2500 Inverted V SS 11' 803.00$ 8.120 9905366 HI-WAY 2020XT/E2500 Inverted V SS 12' 803.00$ 8.121 9905367 HI-WAY 2020XT/E2500 Inverted V SS 13' 1,106.00$ 8.122 9905368 HI-WAY 2020XT/E2500 Inverted V SS 14' 1,106.00$ 8.123 9905369 HI-WAY 2020XT/E2500 Inverted V SS 15' 1,132.00$ 8.124 9905370 HI-WAY 2020XT/E2500 Inverted V SS 16' 1,132.00$ 8.125 9905371 HI-WAY 2020XT/E2500 Hinged screens 9' 1,813.00$ 8.126 9905372 HI-WAY 2020XT/E2500 Hinged screens 10' 2,015.00$ 8.127 9905373 HI-WAY 2020XT/E2500 Hinged screens 11' 2,081.00$ 8.128 9905374 HI-WAY 2020XT/E2500 Hinged screens 12' 2,324.00$ 8.129 9905375 HI-WAY 2020XT/E2500 Hinged screens 13' 2,748.00$ 8.130 9905376 HI-WAY 2020XT/E2500 Hinged screens 14' 2,803.00$ 8.131 9905377 HI-WAY 2020XT/E2500 Hinged screens 15' 3,011.00$ 8.132 9905378 HI-WAY 2020XT/E2500 Hinged screens 16' 3,085.00$





Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer1.0 HI-WAY XT3 TYPE III

2.0 HYDRAULIC DUMP/SPREADER

The XT3 Type III body is designed to function as a traditional dump body and as acenter conveyor discharge through the tailgate. As a standard rear conveyordischarge, the 25:1 planetary drive is located at the rear of the body/conveyor. Theconveyor feeds material through the adjustable feedgate, located within the tailgate,and is directed to the spinner through a chute assembly under the apron. Thetailgate is double acting and will lay substantially flat for hauling brush and like items.The head sheet is flat with an internal doghouse that houses the trunnion mountedtelescopic cylinder.95.5" width for maximum capacity.The design of the side sheet/floor shall be such that the vertical surface (side wall)transforms into a horizontal surface (floor) through a large radius. This design willprovide a 42" flat surface of the dump body floor allowing for the transportation ofpalletized materials, barrels, sign posts and other like items.7-gauge 304 stainless steel sides and ends (85,000 psi tensile/35,000 psi yieldstrength). The side sheets, endgate, and head sheet are all of one-piececonstruction.7-gauge 304 stainless steel full depth rear corner posts tied to a 12” channel rearapron.304 stainless steel formed longitudinals – 7-gauge inner & 7-gauge outer.One-piece 3/16” AR400 steel conveyor floor positioned 12-1/2” above the chassisframe rails.28” wide center conveyor extending beyond the tailgate which allows for a

ti l f d t Th t d d h 1/2” 1 1/2” b ld d t Feedgate is pin adjustable and has 8 positions to vary discharge rates.Conveyor idler and drive shafts are 2” diameter and equipped with 8-toothdrop forged steel sprockets.Dual pancake type air tailgate latch with dual over-center linkage. (Valve is notincluded.)Single acting, trunnion mount, nitrided telescopic hoist with 2 year warranty.8” x 6” x 1/2” structural angle rear hinge assembly with 2” diameter 300 seriesstainless steel pins through 2-1/2” hinge blocks.Cylinder mounts and hinge blocks are equipped with grease fittings.Body is equipped as standard with sloped fenders.All 304 stainless steel is left unpainted. Non-304 stainless steel components are painted black.



4.04.1 N/A

Spec # Part # Description Price






Type of Sander



8.001 9905405 HI-WAY 10' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 32,278.00$ 8.002 9905406 HI-WAY 11' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 33,268.00$ 8.003 9905407 HI-WAY 12' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 34,293.00$ 8.004 9905408 HI-WAY 13' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 35,788.00$ 8.005 9905409 HI-WAY 14' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 38,178.00$ 8.006 9905410 HI-WAY 15' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 38,381.00$ 8.007 9905411 HI-WAY 16' XT3 Type III Body - Rear Discharge - 201 Stainless Steel 39,226.00$

OTHER OPTIONS

8.101 9905412 HI-WAY 10' XT3 Type III Body - #4 belt-over-chain conveyor - ILO standardand steel conveyor cover

$ 1,596.00


$ 1,733.00


$ 1,884.00


$ 2,026.00


$ 2,167.00


$ 2,334.00


$ 2,455.00

8.108 9905419 HI-WAY XT3 Type III Body - Conveyor chain oiler - installed $ 228.00 8.109 9905420 HI-WAY XT3 Type III Body -Conveyor motor with speed sensor $ 298.00

8.110 9905421 HI-WAY XT3 Type III Body Double-acting hoist cylinder ILO single-acting $ 804.00

8.111 9905422 HI-WAY XT3 Type III Body - Polyurethane spinner disc ILO steel $ 86.00 8.112 9905423 HI-WAY XT3 Type III Body -Asphalt patching pan $ 253.00 8.113 9905424 HI-WAY XT3 Type III Body -Rear discharge chute - carbon steel $ 314.00

8.114 9905425 HI-WAY XT3 Type III Body -Rear mount sandbagger (no control) - 304stainless steel

$ 1,051.00

8.115 9905426 HI-WAY XT3 Type III Body -LED light kit - includes stop/tail/turn &clearance

$ 516.00

8.116 9905427 HI-WAY 10' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 879.00 8.117 9905428 HI-WAY 11' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 940.00 8.118 9905429 HI-WAY 12' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 1,016.00 8.119 9905430 HI-WAY 13' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 1,076.00 8.120 9905431 HI-WAY 14' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 112.00 8.121 9905432 HI-WAY 15' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 1,278.00 8.122 9905433 HI-WAY 16' XT3 Type III Body - Flat Fenders ILO Sloped Fenders: $ 1,359.00

8.123 9905434 HI-WAY XT3 Type III Body - Pre-Wet Tank Options (Tank Only) / Installed65-gallon fender mount tank - 304SS (each side)

$ 2,016.00

8.124 9905435 HI-WAY 13',14',15',16' XT3 Type III Body - Pre-Wet Tank Options (TankOnly) / Installed 95-gallon fender mount tank - 304SS (each side)

$ 2,319.00

8.125 9905436 HI-WAY XT3 Type III Body Pre-Wet System Options / Not Installed Singletank HWXTSTS-ME - Manual Electric pre-wet system

$ 2,026.00

8.126 9905437 HI-WAY XT3 Type III Body Pre-Wet System Options / Not Installed Dualtank HWXTSTS-ME - Manual Electric pre-wet system

$ 2,192.00

8.127 9905438 HI-WAY XT3 Type III Body Pre-Wet System Options / Not Installed Singletank HWXTSTS-HCL - Hydraulic Closed Loop system (tank not included) $ 3,076.00

8.128 9905439 HI-WAY XT3 Type III Body Pre-Wet System Options / Not Installed Singletank HWXTSTS-HCL - Hydraulic Closed Loop system (tank not included) $ 3,243.00

8.1 SEE TABLE BELOW8.100 9905391 Install HI-WAY Dump/Spreader Body 3,434.00$



Price quote for:

Vendor Name:

Contact Person:

Street Address:

P.O. Box:

City, State, Zip:

Phone #:

Toll Free #:

Fax #:

Email Address:

Item # Answer1.0 HI-WAY XZALT SERIES

2.0

Precsion Placement, V-Box Style sander, for both

Granular & Liquid Application

304 stainless steel construction, the standard body width is 82".The Xzalt is able to uniformly spread granular materials alone or blended with liquidat a width of up to a 36 feet wide.The main support frame is coated with a hot dipped zinc galvanized finish forlonger life with minimal maintenance."Endless" design straight belt conveyor system installed over a stainless steelbottom panel provides for a low maintenance conveyor system capable of spreadingmost granular materials.The idler roller and take-up mechanism is complete stainless construction withsealed bearings, providing for low maintenance costs.The drive assembly consists of a 6:1 spur gear case providing 98% hydraulicefficiency, for lower operating and maintenance costs.The drive drum consists of a stainless shaft and drum assembly connected to thegear case through a stainless steel coupling. Positive drive, to the belt, is providedthrough the vulcanized rubber covering on the drum.

All high wear items, such as the metering gate, spinner chute and spinner diskare stainless steel construction on both carbon and stainless steel bodies.adjustment is required for rate application.p y jsurface.Liquid tanks with 2" fill port, and dual cross over hoses provide for quickloading and unloading of tanks.Hydraulic and electrical controls protected in stainless steel enclosure.The standard unit is equipped with domed galvanized screens - opening sizeof 4" x 4".The standard unit is equipped with a rear mounted fold-up inspection ladder.



4.04.1 N/A

Spec # Part # Description Price Dump Body Mounted Unit

8.001 9904968 10'DB Xzalt - (5.2 cubic yard struck capacity w/ 465 gallon liquid cap 50,723.00$ 8.002 9904969 12'DB Xzalt - (6.4 cubic yard struck capacity w/ 585 gallon liquid cap 52,889.00$






Type of Sander



8.003 9904970 14'DB Xzalt - (7.5 cubic yard struck capacity w/ 700 gallon liquid capa 54,526.00$ Chassis Mounted Unit

8.004 9904971 10'CM Xzalt - (5.2 cubic yard struck capacity w/ 465 gallon liquid cap 45,339.00$ 8.005 9904972 12'CM Xzalt - (6.4 cubic yard struck capacity w/ 585 gallon liquid cap 48,000.00$ 8.006 9904973 14'CM Xzalt - (7.5 cubic yard struck capacity w/ 700 gallon liquid cap 49,687.00$

OTHER OPTIONS8.2 9904974 High Volume - upgrade 25 gpm pump to 50 gpm for anti-icing all mod $ 3,369.00

8.39904975

10' PVC coated polyester tarp with galvanized / stainless frame and linkage - Installed at Factory

$ 2,580.00

8.49904976


$ 2,782.00

8.59904977


$ 2,950.00

8.1 SEE TABLE BELOW8.101 9905441 Xzalt Spreaders Installed During Truck Build 1,148.00$ 8.102 9901732 Install V-Box (as Slide-In) into Dump Body 1,248.00$ 8.103 9901733 Install V-Box as rigid frame mount on chassis 1,467.00$ 8.104 9905440 Installation of Xzalt on existing truck 2,653.00$

8.105 9901734 Install V-Box on A-FRAME for Hooklift application NOTE: See 1.0 Body Options for A-Frame pricing 1,467.00$



8.0 NON-MnDOT PRICE SCHEDULE SANDER · 8.001 9900782 1ASD-6CDSS-6P-1D-1S-SM complete sander (Per...

Documents

Transcript of 8.0 NON-MnDOT PRICE SCHEDULE SANDER · 8.001 9900782 1ASD-6CDSS-6P-1D-1S-SM complete sander (Per...