8 use of pythagorean theorem # 9 single implant case

34
BEL 2.2013 Guide Right ™ Use of Pythagorean Theorem in #9 Single Implant Case 3 mm X 30 mm guide post 3 mm guide sleeve 3 mm X 1.5 mm offset guide post 3 mm open guide sleeve Pythagorean Theorem Cosine software analysis I nvi vo5 Anatomage Featuring: LINEAR CORRECTIONS DIAGNOSTIC Guide SURGICAL Guide

Transcript of 8 use of pythagorean theorem # 9 single implant case

Page 1: 8 use of pythagorean theorem # 9 single implant case

BEL 2.2013

Guide Right ™

Use of Pythagorean Theorem in #9 Single Implant Case

3 mm X 30 mm guide post

3 mm guide sleeve

3 mm X 1.5 mm offset guide post

3 mm open guide sleeve

Pythagorean Theorem ► Cosine

software analysis

Invivo5 Anatomage

Featuring: LINEAR CORRECTIONS

DIAGNOSTIC Guide

SURGICAL Guide

Page 2: 8 use of pythagorean theorem # 9 single implant case

Fabrication of DIAGNOSTIC guide

Page 3: 8 use of pythagorean theorem # 9 single implant case

Line marked on teeth to position original axis

for initial 3/32” drill mm & 3 mm guide post.

facial view

Page 4: 8 use of pythagorean theorem # 9 single implant case

3 mm X 30 mm guide post in 3/32” hole

Page 5: 8 use of pythagorean theorem # 9 single implant case

3 mm guide sleeve placed on the 3 mm guide post

and cast lubricated with petroleum jelly

Page 6: 8 use of pythagorean theorem # 9 single implant case

Initial layer of Triad® Gel added to the guide sleeve cleats

and cured to stabilize the guide sleeve.

Page 7: 8 use of pythagorean theorem # 9 single implant case

DIAGNOSTIC Guide

showing the 3 mm guide sleeve attached to the cured acrylic

ready to be placed for cone beam X-ray.

Page 8: 8 use of pythagorean theorem # 9 single implant case

Additional and final layer of Triad® Gel

extended to lingual and incisal surfaces of adjacent teeth

Page 9: 8 use of pythagorean theorem # 9 single implant case

PRE-OPERATIVE

Software Evaluation

Invivo5 Anatomage

Page 10: 8 use of pythagorean theorem # 9 single implant case

axial plane

tangential plane · mesial-distal

cross sectional plane · buccal-lingual

3D volume

INITIAL EVALUATION of DIAGNOSTIC guide sleeve position

Invivo5 Anatomage

Invivo5 Anatomage

# 9

Page 11: 8 use of pythagorean theorem # 9 single implant case

Axial Plane

The markings on the concentric

circles are 5 mm apart allowing

measurements to be calculated.

virtual implant

Yellow line passing through the axis of the implant creates the

view seen in the cross sectional view (next slide).

Greater accuracy in implant placement is achieved when the line representing

the bucco-lingual plane is set at 90° to the buccal surface of the arch.

Dragging the yellow line in the software will

change the cross sectional view as the line

rotates about the axis of the implant.

Invivo5 Anatomage # 9

Page 12: 8 use of pythagorean theorem # 9 single implant case

preferred implant placement

axial plane

tangential plane · mesio-distal

cross sectional plane · bucco-lingual

3D Volume

Images from software evaluated in 3 planes: axial, mesio-distal & bucco-lingual

Invivo5 Anatomage

Invivo5 Anatomage

# 9

cross sectional plane · bucco-lingual

Page 13: 8 use of pythagorean theorem # 9 single implant case

LINEAR CORRECTION

Yellow line passing through the axis of the implant.

The virtual implant is moved parallel & facial 1.3 mm

to the location of the DIAGNOSTIC guide sleeve.

# 9

virtual implant

actual guide sleeve

5 mm grid intervals

to allow measurements

to be calculated.

Invivo5 Anatomage

cross sectional view.

Illustrating preferred implant placement position (bucco-lingual)

Page 14: 8 use of pythagorean theorem # 9 single implant case

5 mm grid intervals

to allow measurements

to be calculated.

virtual implant

Illustrating the preferred implant placement in the tangential view

The center of the virtual implant is located 1 mm mesial

to the center of the DIAGNOSTIC guide sleeve.

actual guide sleeve

Invivo5 Anatomage

LINEAR CORRECTION Illustrating preferred implant placement position (mesio-distal)

# 9

tangential view

Page 15: 8 use of pythagorean theorem # 9 single implant case

axial plane

tangential plane · mesio-distal

cross sectional plane · bucco-lingual

3D Volume

Images from software evaluated in 3 planes: axial, mesio-distal & bucco-lingual

Invivo5 Anatomage

Invivo5 Anatomage

preferred implant placement

tangential plane · mesio-distal

Page 16: 8 use of pythagorean theorem # 9 single implant case

Review of Pre-op Corrections

#9

LINEAR CORRECTION

Cosine is applied to determine correction data.

* see next 3 slide

1.5 mm offset guide post rotated 45º toward the mesial & facial.

Page 17: 8 use of pythagorean theorem # 9 single implant case

Pythagorean Theorem COSINE Calculations for Guide Right™ Guides

The cosine of 45°

is recommended for Guide Right corrections

BECAUSE

rotating the offset guide post half way

between 2 adjacent planes (90° apart) is 45°.

Page 18: 8 use of pythagorean theorem # 9 single implant case

Correction based on the calculations

from the Pythagorean Theorem

To move the position of the guide sleeve 1 mm both mesially & buccally:

► use a 1.5 mm offset guide post

► and rotate the offset guide post 45º to a mesio-buccal position.

Cosine of 45° X 1.5 mm = 0.71 X 1.5 mm = 1.06 mm

Page 19: 8 use of pythagorean theorem # 9 single implant case

facial 1.06 mm

45°

me

sia

l 1

.06

m

m

A= cosine of 45º X 1.5

(0.707 X 1.5 mm = 1.06 mm

45°

guide post center

Page 20: 8 use of pythagorean theorem # 9 single implant case

A= cosine of 45º X 1.5

(0.707 X 1.5 mm = 1.06 mm

Page 21: 8 use of pythagorean theorem # 9 single implant case

Fabrication of SURGICAL guide

Page 22: 8 use of pythagorean theorem # 9 single implant case

palatal view

1.5 mm offset guide post rotated 45º toward the mesial & facial.

Page 23: 8 use of pythagorean theorem # 9 single implant case

Initial application of Triad® Gel

to capture the cleats on the open guide sleeve to form the SURGICAL guide.

Page 24: 8 use of pythagorean theorem # 9 single implant case

Additional Triad® Gel added to adjacent teeth

Page 25: 8 use of pythagorean theorem # 9 single implant case

Final SURGICAL guide

Page 26: 8 use of pythagorean theorem # 9 single implant case

SURGICAL guide (facial view)

Page 27: 8 use of pythagorean theorem # 9 single implant case

POST-operative RESULTS

Software Analysis Invivo5 Anatomage

Page 28: 8 use of pythagorean theorem # 9 single implant case

# 9 POST-OP RESULTS

axial plane

tangential plane · mesio-distal

cross sectional plane · bucco-lingual

3D Volume

showing actual implant placement.

Invivo5 Anatomage

Page 29: 8 use of pythagorean theorem # 9 single implant case

Axial Plane

The markings on the concentric

circles are 5 mm apart allowing

measurements to be calculated.

virtual implant

Yellow line passing through the axis of the implant creates the

view seen in the cross sectional view (next slide).

Greater accuracy in implant placement is achieved when the line representing

the bucco-lingual plane is set at 90° to the buccal surface of the arch.

Dragging the yellow line in the software will

change the cross sectional view as the line

rotates about the axis of the implant.

# 9 POST-OP results

Invivo5 Anatomage

Page 30: 8 use of pythagorean theorem # 9 single implant case

Cross Section (bucco-lingual)

virtual implant

superimposed over

actual implant

actual

open guide sleeve

Yellow line passing through the axis of the implant.

5 mm grid intervals

to allow measurements

to be calculated.

# 9 POST-OP results

Only one wall of

open guide sleeve is visible.

Invivo5 Anatomage

Page 31: 8 use of pythagorean theorem # 9 single implant case

Tangential (mesio-distal)

5 mm grid intervals

to allow measurements to

be calculated.

virtual implant

superimposed over

actual implant.

actual guide sleeve

# 9 POST-OP result

Invivo5 Anatomage

Page 32: 8 use of pythagorean theorem # 9 single implant case

Guide Right™

Products shown in this case

1 - 3/32” drill

1 - 3 mm X 30 mm Guide Post

1- 3 mm Guide Sleeve

1 - 3 mm x 1.5 mm Offset Magnetic Guide Post

1 - 3 mm Open Guide Sleeve

Guide Post Bending Tool

Triad® Gel

1.800.314.0065 • www.deplaque.com

Page 33: 8 use of pythagorean theorem # 9 single implant case

In-office or lab fabrication

Evaluate with 2D & 3D imaging

Allows linear and angular correction

Enables precision implant placement

Cost effective

A System of Components

for the fabrication and correction of diagnostic & surgical templates

in one or two dimensions

1.800.314.0065 • www.deplaque.com

Page 34: 8 use of pythagorean theorem # 9 single implant case

Guide Right™ Surgical Guide System

Start With Precision. Place With Confidence.™

1.800.314.0065 • www.deplaque.com

fabricate ▪ evaluate ▪ correct ▪ verify ▪ place

DéPlaque