8 - 10 December 2014 · 2015. 10. 1. · mtex oman 2014 1 The 3rd International Exhibition For...

The 3rd International Exhibition ForMachinery, Tools & Equipment

8 - 10 December 2014Oman International Exhibition Centre, Muscat



1mtex oman 2014


8 - 10 December 2014Oman International Exhibition Centre

Muscat, Sultanate of Oman

www.MtexOman.com

Exhibition Timings:11:00am - 6:00pm

Organiser P.O. Box 894, P.C. 115, MuscatSultanate Of Oman

Tel. No.: +968 2478 3800Fax No.: +968 2478 3500Email: [email protected]

Website: www.gecexpo.com

2 mtex oman 2014

Table of Contents

Acknowledgement

General Information

Welcome Messages

floor plan

list of exhibiting Companies

Exhibitors’ profile

index of product and services

about the organiser

03

04

06

08

09

12

44

48

3mtex oman 2014

Acknowledgement

Global Exhibitons & Conferences LLC would like to thank the following associations and companies for their valuable support,

which has greatly contributed to the success of Mtex Oman 2014

Silver Sponsor

Supporting Organisations

Media Partners

OMAN SECTION

4 mtex oman 2014

General Information

AdmissionMtex Oman 2014 is open to trade professionals and the general public.

BanksA branch of Bank Dhofar is located a five-minute drive from the exhibition centre, and a branch of the National Bank of Oman is located at nearby Muscat International Airport. An ATM machine of Bank Dhofar and the National Bank of Oman can also be found right inside the exhibition centre.

First AidFirst aid is available in the main entrance foyer.

InformationThe information desk is located at the reception area leading to the exhibition hall.

Lost PropertyLost and found items should be handed over to or claimed from the organisers’ office.

Organisers’ OfficeThe organisers’ office is located within the exhibition hall, to the right of the entrance. To contact the organisers’ office during the event, please call tel. no. +968-24512124/125/126.

Parking SpaceThe exhibition centre has adequate free parking space that can accommodate more than 3,000 vehicles at a time.

Prayer RoomsTwo prayer rooms are located within the exhibition centre.

RestaurantA full-service restaurant and cafeteria is located in the exhibition centre. It will be open throughout the show, serving a selection of hot and cold meals, drinks and light refreshments.

ToiletRest rooms for men and women are located in the exhibition centre and are clearly marked.

DisclaimerAlthough utmost care has been taken in compiling this show catalogue, Global Exhibitions & Conferences LLC will not be held responsible for any changes to the programme, any statement made on behalf of the exhibitors, nor for any omissions or errors that may have occurred.

DesignDecorInteriorsOffices | Commercial Complexes | Malls

Airports | Hotels & Resorts | Hospitals | Museums

The 4th International Exhibition forDesign, Decor & Interiors

Offices | Commercial Complexes | Malls | AirportsHotels & Resorts | Hospitals | Museums

Interiors & Design• Architectural / Design Practices• Ceiling Materials• Commercial Design & Build• Doors & Windows• Flooring Products• Furniture & Furnishings• Interior Landscaping• Lighting & Lamps• Partititioning Materials• Space Planning & Consultancy• Wall Coverings• Paints

Office Automation & Solutions• Office Furniture & Workstations• Computers & Accessories• Printers, Scanners & Photocopiers • IT Solutions• Multimedia & Communication• Security & Safety Solutions• Storage & Filing Systems• Telecommunication Services

Art & Decor• Antiques• Art Galleries• Crystals• Decorative Glass & Stones• Handicrafts• Paintings• Pots, Vases & Bowls• Sulptures• Table Top Products

14 - 16 September 2015Oman International Exhibition CentreMuscat, Sultanate of Oman

www.OmanOfficeShow.com

Organiser

DesignDecorInteriorsOffices | Commercial Complexes | Malls

Airports | Hotels & Resorts | Hospitals | Museums

The 4th International Exhibition forDesign, Decor & Interiors

Offices | Commercial Complexes | Malls | AirportsHotels & Resorts | Hospitals | Museums

Interiors & Design• Architectural / Design Practices• Ceiling Materials• Commercial Design & Build• Doors & Windows• Flooring Products• Furniture & Furnishings• Interior Landscaping• Lighting & Lamps• Partititioning Materials• Space Planning & Consultancy• Wall Coverings• Paints

Office Automation & Solutions• Office Furniture & Workstations• Computers & Accessories• Printers, Scanners & Photocopiers • IT Solutions• Multimedia & Communication• Security & Safety Solutions• Storage & Filing Systems• Telecommunication Services

Art & Decor• Antiques• Art Galleries• Crystals• Decorative Glass & Stones• Handicrafts• Paintings• Pots, Vases & Bowls• Sulptures• Table Top Products

14 - 16 September 2015Oman International Exhibition CentreMuscat, Sultanate of Oman

www.OmanOfficeShow.com

Organiser

6 mtex oman 2014

Welcome Message from the Chief Guest

Greetings from the Public Establishment for Industrial Estates (PEIE) under whose auspices a vibrant and well-diversified manufacturing sector continues to proliferate and prosper across the length and breadth of the Sultanate.

Industry is today the single largest contributor to the non-oil economy of Oman, thanks in large measure to the enabling environment created by the government and the infrastructure and facilities provided by PEIE. Our network of industrial parks is undergoing robust growth – both organic and numerical – as we continue to leverage our resources and competitive strengths to support the diversification of the national economy.

It is in the context of PEIE’s mandate as the nation’s industrial development flagship that we take great pride in extending our support to MTEX – an exhibition showcasing machinery, tools and equipment. The importance of such an exposition to boosting efficiency, productivity and competitiveness in the industrial and manufacturing sector is doubtless paramount.

Modernization coupled with innovation is the quintessential ingredient for success in the manufacturing sector. Our factories must endeavour to continually upgrade their equipment and facilities to keep abreast of the latest advances in their respective areas of operation. MTEX offers that opportunity for our investors and factory managers to check out the vast array of cutting-edge machinery and tools that will be on display at the exhibition venue. As the principal platform for hardware sourced from around the world, MTEX promises to offer solutions that may contribute to your performance and productivity goals.

In particular, I strongly encourage young Omani entrepreneurs and SMEs to browse through the merchandise on display and hopefully be inspired into starting a small-scale industrial or manufacturing unit.

In concluding, I wish to applaud the organizers, Global Exhibitions & Conferences LLC, for bringing this high-quality expo to Oman. With numerous brands, manufacturers and dealers due to be represented at this event, MTEX 2014 has the potential to stimulate a new wave of modernization across the manufacturing sector in Oman.

Hilal Bin HamadAl Hasani

Chief Executive Officer,Public Establishment for Industrial

Estates

7mtex oman 2014

Welcome Message from the Organiser

I join my colleagues at Global Exhibitions & Conferences LLC (GEC) in extending to all of you a hearty welcome to the third edition of MTEX, an exclusive showcase of machinery, tools and equipment drawn from around the world.

Since its launch two years ago, MTEX has evolved from a somewhat modest fair into a high-profile showcase of world-class hardware merchandise that is actually helping provide a strong new impetus to the modernisation of Omani industries. This annual expo is keenly awaited by Omani investors, factory owners and entrepreneurs eager to embrace new products and technologies that will help drive up productivity, efficiency and output at their plants. After all, the vast merchandise on display at MTEX represents breakthroughs in engineering R&D and technological innovation, making them must-have products that Omani manufacturers cannot do without.

As a renowned event management company, Global Exhibitions & Conferences LLC endeavours to organize expos that help various segments of the Omani economy connect with the wider world. Exhibitions like MTEX offer domestic players the opportunity to network, collaborate and transact with distributors and suppliers representing a staggering array of world-renowned brands and products. For those in manufacturing and industry here in Oman, MTEX represents a unique arena to shop for the world’s latest machinery and hardware all under one roof. Our sincere thanks to the Ministry of Commerce & Industry for backing this event from the outset! GEC also places on record its gratitude to AHK, Public Establishment for Industrial Estates (PEIE), Indo-Arab Chamber of Commerce & Industries, Asian-Arab Chamber of Commerce, Arab-German of Commerce and Industry, Oman Society of Engineers, IEEE - Oman Section and Oman Society of Contractors for their patronage.

I wish all of you successful and rewarding experiences at MTEX 2014.

C.J. PaulChief Executive Officer

Global Exhibitions &Conferences LLC

8 mtex oman 2014

Floor Plan


9mtex oman 2014

List of Participants

A.F.H ToolsAbu Ilyas Trading LLCAfaq Al Musana Trading LLCAnping Spider Wire Mesh Co.LtdArwani Trading CompanyAtad International General Trading LLCAtlas CopcoAtlas CopcoB.T. Innovation GmbH Backstop Industries CoBank SoharBankDhofar SAOGBaykalBelleBig WipesBin Salim Enterprises LLCBlack JackBoltmaster Bldg. Mat. Trdg. LLCCertuss Dampfautomaten GmbH & Co. KgCNC TakangComevaCorreaanayakCostaDurmazlar EmmegiEner PlasticsEuromacExpertFacomFeelerFelderFreddy

UAEOmanOmanChinaUAEUAE

BelgiumSweden

GermanyUAE

OmanOmanTurkey

UKUK

OmanIndiaUAE

GermanyTaiwanSpainSpainItaly

TurkeyItalyUAEItaly

FranceFranceTaiwanAustria

UK

301315595625421435501501445433610122320501312501315245445255320255320521320501320315315255320301

Name Country Stand No.

10 mtex oman 2014

FroniusGaam ElectricGenmac German Tech Engineering (GTE) FZCGhorfa, Arab-German Chamber of Commerce and IndustryGibenHeadlines Advertising LLCHeinz Soyer GmbHHiltiHiwin MikrosystemsHuvemaIcaro SRLIgus GmbHIntercableIron Mfg. Tools For Cutting Metals LLCKhk GearsKleinKnuth Machine ToolsLandis & GyrLantek SMSLutian Machinery Co. Ltd.M.A.Qaiser Industrietechnik GmbHMacdonaldMachine Tools Traders (Madras)MagnescaleMahindra PowerolMalatan Trading & Contracting LLCMetaboMTI LimitedNew Safeer TradingNorton ClipperOil & Gas Directory ME

AustriaIranItalyUAE

GermanyItaly

OmanUAE

OmanTaiwanHolland

ItalyUAEItalyUAE

JapanUAE

GermanyGermany

SpainChina

GermanyUK

IndiaUAEIndia

OmanGermany

UKOman

LuxembourgUAE

501433501433445320450433501121301501121501247121605491501121631445501495605501601312607245501125


List of Participants

11mtex oman 2014

OmecOrionPrimedia International Oman LLCPSI Products GmbHPublic Establishment For Industrial Estates Reforms Machines & Tools LLCRobert Bosch GmbHRontgenSaif Industrial Machinery TrdgSatherm GmbHSFE Shanghai Minglong Import And Export Co. Ltd.SigmaSimco Industrial Machinery Trd. Co. LLCSpectra PrecisionSpectra PrecisionSpeed ToolsSperoniSun-BirdTaegutecTBI IndustriesTechnical Supplies International Company LLCTechnoflowThompson International Machinery Trading LLCTrafimet SPATrelawnyTschornTyrolitUnigroup FZEXilinZhejiang Finetouch Electronic Technology Co. Ltd.

UAEOmanOman

GermanyOmanUAE

OmanUAEUAE

GermanyFranceChina

TaiwanUAEUSA

JapanTaiwan

ItalyUAE

South KoreaUAE

OmanUAEUAEUAEUK

GermanyAustria

UAEChinaChina

320312455445111605601605521445501627255320501501255312605301433312605255433501301312121315621


12 mtex oman 2014

A.F.H ToolsP. O. Box 4007,Dubai,United Arab Emirates.Ph: +971-4-3400034Fax: +971-4-3400811Contact Person : Aziz AbbasDesignation: Director

A.F. Husain (LLC) in Dubai was established in 1965. Since then AFH has been serving the manufacturing industry with best machine tools, cutting tools, hand tools, torque tools and measuring instruments with best in class solution and support.

Our focus is that manufacturing requires regional expertise to support your specific needs and our commitment to our clients has never changed. “Technology for high productivity” is the philosophy that drives us to help you reach your manufacturing objectives.

Abu Ilyas Trading L.L.CP. O. Box 461, P. C. 117, Wadi Kabir,Sultanate of Oman.Ph: +968-24814979Fax: +968-24816224Contact Person : Antony Puthur JoseDesignation: General Manager

ABU ILYAS TRADING L.L.C is a leading stockiest and supplier of industrial and oil field equipments in Sultanate of Oman.

Exhibitors’ Profile

301Stand No.

315Stand No.

Our history goes back to 1991 when we were born and from a humble beginning due to the dedication and determination of our sales and administration personnel, we have reached a stage where we are into the latest technical industrial diversifications.

Most of the leading drilling companies, oil companies and petrochemical companies and a few ministry departments are our clients. Over the years due to our service and proven capacity to source out anything from any corner of the globe, we have attained the confidence of our esteemed customers.

Apart from the progress attained in the infrastructural developments we have been able to nurture young blood into a cream of aggressive professionals waiting to lock horns.

We have with us qualified engineers, marketing professionals and service engineers. As a premium supply house, we represent many major manufacturers around the world in Sultanate of Oman.

We hold price contracts for safety products with leading drilling companies, EPC contractors and few leading construction contractors in Sultanate of Oman.

We carry a wide range of industrial and safety products and we have procurement facilities in Houston and UK for any kind of oil field, industrial requirements and safety products.

13mtex oman 2014

Anping Spider Wire Mesh Co. Ltd.Mebao Road East, Anping,(Nanguan Village Southwest)Ph: +86-318-5182996Fax: +86-318-7589929Contact Person : Du YisongDesignation: General Manager

We are a manufacturer with ISO 9001:2008 certificate in China, specializing in wire and mesh products with high quality and competitive prices, such as GI wire, chain link fence, SS wire mesh, welded wire mesh, reiforcing mesh, fence so far and so on.

ARWANI TRADING COMPANYAl Garhoud, Dubai,United Arab Emirates.Ph: +971-04-2828223Fax: +971-04-2828207Contact Person : Eyad ArwaniDesignation: Marketing Manager

Arwani established over 30 years ago, specializes in wholesale, distribution and retail. Its business model is anchored at providing extensive dealer network with reputed, high quality and cost efficient brands. Arwani Trading covers a very wide range of products, mainly: Air Compressors; Power Tools; Garage Equipment; Welding Machines & Wires; CNC Cutting Machines Tools, Machinery and Consumables for the Construction Industry and Wood Working Machines.

AFAQ AL MUSANA TRADING LLCRoom 51, 5th Floor, Bait Al Khuwair, Al Khuwair Street, Muscat, Sultanate of Oman.Ph: +968-24484601Fax: +968-24484603Contact Person : Qasim Al LawatiDesignation: CEO

Afaq Al Musana Trading LLC was established in 2004 with the mission to supply and support local & international organizations around the globe with turnkey construction solutions to generate the most efficient and effective results.

Afaq Al Musana is a customer focused construction and contracting company, which undertakes all contracts, works relevant Western European, US or other international standards according to the demands of the individual client.

Services offered as follows: • Electro Mechanical Contracting and

Maintenance • Horizontal Directional Drilling • Micro Tunneling • Building Materials • Home Furnishing

595Stand No.

421Stand No.

625Stand No.

14 mtex oman 2014

Atlas Copco, Belgium/ Sweden(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of OmanPh: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Air Compressors, Electric Generators, Pneumatic Rock Breakers, Drilling Rigs, Drill Rods and Bits etc.

B.T. innovation GmbH(Represented by Ghorfa , Arab-German Chamber of Commerce and Industry)Sudenburger Wuhne 6039116 MagdeburgGermanyPh: +49-391-735245Fax: +49-391-735252Contact Person : Wafaâ JlaouiDesignation: Account Manager

For more than 23 years B.T. innovation GmbH (Germany) offers a wide product spectrum that includes but not limited to magnet technology, complex shuttering systems, joining technology and sealing products for precast plants and construction companies.

We also offer our partners such services as consulting, planning and implementation of new plants or optimization of existing precast plants. B.T. innovation GmbH focuses equally

ATAD INTERNATIONAL GEN. TRDG. LLCOffice # 106, CBD Building,Al Qouz, Dubai,United Arab Emirates.Ph: +971-4-3306063Fax: +971-4-3306064Contact Person : Saeed TareefiDesignation: Manager - Machine Tool Div.

ATAD is part of a group of family owned companies that have been operating in the UAE for over 35 years.

It is based in Dubai and was originally established in April 1998. Our Industrial Machine Tools Division specializes in the sales and service of high quality machinery and tools, utilizing the latest technologies.

We supply a diverse range of business sectors within the region including switchgear manufacturers, kitchen fabricators, armoured vehicle manufacturers, sheet metal fabricators and general job shoppers.

We also supply portable and easy to use on site punching machines, magnetic drilling machines, stud welding machines, both electric & pneumatic power tools specialized for cutting, bevelling, seam locking and crimping which are used in fabrication, sheet metal, air-conditioning and HVAC industries.


435Stand No. 501Stand No.

445Stand No.

15mtex oman 2014

its successful initial public offer and listing as an SAOG Bank on the MSM. The Bank commenced operations in April 2007. Within a short timeframe of 7 years, it has grown rapidly to emerge as one of Oman’s leading lending institution and looks forward to a continued healthy all-round growth. Bank Sohar’s vision is to be a one stop financial super mall having boutiques of products and services across various segments, each with a unique set of propositions, tailored to meet the evolving customer requirements

Network:The Bank has a branch network of 26 branches and 44 ATMs across Oman and its business encompasses products and services catering to various segments – Retail banking, Corproate Banking, Treasury and Institutional banking services. The Bank also opened 4 Islamic bank branches in 2013 under the brand “Sohar Islamic”.

Retail Banking:The Retail Banking Division of the Bank offers an extensive range of products and services that are customized to meet the various life cycle stages of its customers. It offers a comprehensive range of products and services under its ‘Al Mumayaz’ brand that includes Savings, Deposits, Special Deposits, Flexi-Deposits, Personal loans, Mortgage, Education loans, Personal loans, Housing finance, Online banking and Any-Branch Banking as well as an array of innovative cards that are tailor made to clients requirements.

Corporate BankingThe corporate Banking serves the large, medium and small corporates and the Government entities with products and services ranging from loans, overdrafts, project finance, syndications and advisory, LCs, BGs, and other trade finance services,

on consulting, development, production and supplies for construction companies and manufacturers of prefabricated concrete parts. With our strong practical bias, we can offer the construction industry many application-oriented solutions that ensure simple, reliable and cost-effective construction processes. Our enviable record of certifications, tests, approvals, utility models and patents under the auspices of building regulations speaks for itself.

Backstop Industries Co.,(Represented by German Tech Engineering (GTE) FZC)P6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +971-6-5575516 / 5575517 / 5578852Fax: +971-6-5575518Contact Person : Negar KhazeniDesignation: Deputy Manager

Studs and Shear Connectors

Bank Sohar P.O. Box 44, P.C. 114,Sultanate of OmanPh: +968-24730000Fax: +968-24730000Contact Person : Talal Ali Ashraf Al ZadjaliDesignation: Senior Chief Manager - Micro & Small Enterprises

Introduction:Bank Sohar was established in 2007 following

433Stand No.

610Stand No.

16 mtex oman 2014

customer deposits, providing Shari’ah compliant financing based on Murabaha, Mudaraba, Musharaka, Ijarah, Istisna’a, Salam and providing commercial banking services, investment and other activities permitted under Islamic Banking Regulatory Framework. This window has complete separation of systems, people, branches and processes to maintain the sanctity of Islamic Banking.

Awards & Recognition:The Bank has received a number of local, regional, and international awards and recognitions within its short operating history for a wide spectrum of achievements. Some recent ones are – ‘Business Excellence Award’ by Texas based, World Confederation for Business (WORLDCOB) at the Bizz Arabic 2014 Awards, ‘Best Financial Brand Oman 2014’ award by renowned UK based Global Brands Magazine, ‘The Diamond Eye Award for Quality, Commitment & Excellence’ from the French based Otherways Management & Consulting Association, ‘Strategic Award’ for its corporate website (www.banksohar.net) from the Lebanon based Pan Arab Excellence Awards Academy as well as from Oman Web Awards. The Bank was also named the ‘Fastest Growing Bank in Oman 2014’ by UK based International Finance Magazine (IFM) and recognized as one of the ‘Top 5 Large Corporate Enterprises in the Sultanate’ for the third consecutive year at the Alam Al Iktisad Wal Amaal (AIWA) Awards. Bank Sohar is also the only entity from Oman to have won three individual awards from the Banker Middle East Product Awards 2014 organized by CPI Financial based in UAE, for its Retail Division consisting of ‘Best Customer Service– Retail Banking’, ‘Best Cash Management’ and ‘Best Corporate Card’. On the Corporate Social Responsibility (CSR) front, the Bank’s yearlong environment awareness campaign ‘Saving Water Electricity…And Our Planet’ was also

treasury, forex to risk management services. Customer requirements are met by specialized Relationship Managers who are equipped to understand the specific needs of the customer and to provide customized solutions.

Treasury:The Bank’s Treasury offers a wide spectrum of treasury services ranging from foreign exchange, Fixed Income, Interest Rate products and derivatives. It provides regular up to date information on various markets and products to our large corporate clients, small and medium enterprises and various government departments and fund managers. Having access to global money and foreign exchange markets, it provides comprehensive cash management and risk management solutions to clients.

Financial Institutions Services: The main focus of this group is to network the Bank globally through extensive correspondent banks. This is to facilitate free flow of trade transactions across the border to help clients not only facilitate their business, but also to access superior facilities across the globe and thereby enhance their trade volumes. This group also studies “Country and Bank” risks across the world and sets prudential exposure levels in tune with the risk appetite for such exposures.

Islamic Banking – Sohar Islamic: In April 2013, the Bank obtained a license to operate its Islamic Banking Window – “Sohar Islamic” and opened 4 Islamic window branches during the same year. The Bank constituted a Shari’ah Advisory and set up requisite systems and procedures to offer Islamic Banking to its clients. Sohar Islamic offers a full range of Islamic banking services and products. Its principal activities include accepting Shari’ah compliant


17mtex oman 2014

With assets worth over OMR 2.5 billion, BankDhofar is one of the fastest growing Banks in the Sultanate of Oman, with a strong presence in Corporate Banking, Consumer Banking, Treasury and Project Finance. The branch network has reached 65 with an extensive ATM & CDM network spanning the country. With a keen interest to help entrepreneurs, the bank aids businesses in this sector to develop, diversify, innovate and promote Omani products and owners. SMEs in the Sultanate, like in many developed countries, have the potential to become engines of economic growth and the backbone of the job market and BankDhofar is at the forefront of supporting them through dedicated and professional business centers located around the Sultanate, set up to aid SME’s in the country.

A market leader in providing the exclusive banking services and recently awarded the ‘Best Bank in Oman 2014’, BankDhofar has also bagged several prestigious awards for its quality service and excellence. To add to its credit, the bank was also commended for having the ‘Best Mobile Banking App’ in Oman in addition to the ‘Best Evolved Brand in Oman 2014’ award. Recently, BankDhofar has been awarded the best bank in Oman by CPI Financial. It was named the Best Retail Bank in Oman twice in 2013 by both Global Finance Market Review as well as the Global Banking & Finance review Awards. BankDhofar was also rewarded for the ongoing investment in infrastructure, personnel and improvement on services and recently collected the highly honored STP award from Commerzbank, Germany. The distinction recognizes BankDhofar’s superior Straight-through-processing (STP) of Euro payments and financial transactions and their ongoing commitment to their customers and clients alike.

recognized at the ‘Oman Green Award 2014’ resulting in the Bank receiving the ‘Green Campaign of the Year’ award.

The Bank is rated by FITCH Ratings with a Long Term Issuer Default Rating of BBB+ (Stable Outlook). Similarly, Capital Intelligence has affirmed Long Term Foreign Currency Rating at BBB+ with a Stable Outlook and Short Term Foreign Currency Rating at A3.

Future Plans:The Bank has chalked out plans to pursue vigorous growth in 2015 and the subsequent years, both in terms of its market share and diversity of financial products and services available to its rapidly growing customer base. Based on the strength of the rapid growth since its inception and with its long-term strategy in place, the Bank is well equipped to meet the intense competition in the financial services sector.

The growth strategies include expansion of branch network, introduction of new products and services and scaling up of business with existing clientele and developing requisite infrastructure to meet the expanding and widening needs of the clients.

BankDhofar SAOGP. O. Box 1507, P. C. 112, Ruwi,Sultanate of Oman.Ph: +971-4-24791111Fax: +971-4-24726282Contact Person : Khalid Ahmed Al ShanfariDesignation: Corporate Sponsorship Mgr.

122Stand No.

18 mtex oman 2014

BIG WIPES, UK(Represented by Technical Supplies International Company LLC)P. O. Box1827 P. C. 130, Al Athaibah,Sultanate of Oman.Ph: +968-24503915Fax: +968-24503920Contact Person : R.MadhanagopalDesignation: Division Manager

Hand cleaning wipes

BIN SALIM ENTERPRISES LLCP. O. Box 808, P. C. 100, Muscat, Sultanate of Oman.Ph: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Bin Salim Enterprises LLC, an ISO 9001:2008 certified company, is one of the leading trading companies in the Sultanate of Oman, supplying quality products and services since 1975.

We are the exclusive distributors and stockists for leading international brands of Light Construction Equipment and Tools, Air Compressors, Rock Breakers, Power Tools, Fasteners, Oil & Gas Equipment, Electrical, Telecom & Security, Surveying Instruments, Welding Machines etc.

BAYKAL, TURKEY(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

Belle, Norton Clipper, Trelawny, Macdonald, Ener Plastics, Icaro Srl, (UK, Italy , Luxembourg)(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of Oman.Ph: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Compactors, Vibrators, Pokers, Diamond Blades, Surface Preparation equipment, Pneumatic Breaker, Scabblers, Masterbatch etc.


320Stand No.

501Stand No.

312Stand No.

501Stand No.

BIN SALIM ENTERPRISES LLC

19mtex oman 2014

8000 stocks and committed for the same day dispatch. Our staff is well versed with technical knowledge of materials and is familiar with the local market trends which makes us highly competitive and proactive to our customer’s needs.

We are suppliers of the most reputed brands such as TV’s-India, KPF- Korea, C&T/FG-UK, SPARTAN-China just to name a few.

CERTUSS Dampfautomaten GmbH & Co. KG(Represented by Ghorfa, Arab-German Chamber of Commerce and Industry)Hafenstraße 65, 47809 Krefeld,GermanyPh: +49 (0)2151 578-190Fax: +49 (0)2151 578-191 / 190Contact Person : Holger DeimannDesignation: International Sales

Certuss has been the market leader and precursor in energy efficiency and environmental awareness in quick steam generators field for decades.

Certuss produces high-quality steam generators based on the water-tube boiler principle in different sizes. The steam is available immediately in the highest quality thanks to the pilot burner technology at gas combustion.

Depending on individual steam requirements you can choose between the Junior SC series, beginning at a steam capacity of 80 kg/h to 600 kg/h, the Universal SC series with a steam capacity of 700 kg/h to 2000 kg/h & the Universal TC series from 500 kg/h to 2000 kg/h.

Our plant hire division serves the temporary requirement of customers through their fleet of Atlas Copco air compressors. All products sold by us are serviced by well qualified company trained team with well-equipped workshop facility.

BLACK JACK, India(Represented by Abu Ilyas Trading L.L.C)P. O. Box. 461, P. C. 117, Wadi Kabir,Sultanate of Oman.Ph: +968-24814979Fax: +968-24816224Contact Person : Antony Puthur JoseDesignation: General Manager

BOLTMASTER BLDG. MAT. TRDG. LLCP. O. Box 20186, Ajman,United Arab Emirates.Ph: +971-67482454Fax: +971-67482393 / 7486042Contact Person : Mohit MarwahaDesignation: General Manager

BOLTMASTER LLC is part of the well known AL SAFEER Group of Companies. Since inception period in the year 2001, we have known to be one of the largest importer & stockist in the GCC region for wide scope of industrial products mainly Fasteners, Tools, Shelving/Storage, Hardware & Building Materials. We hold a huge inventory of more than

315Stand No.

245Stand No.

445Stand No.

20 mtex oman 2014

CNC Takang, Taiwan (Represented by Thompson International Machinery Trading LLC)106 Bank Street Building, P.O. Box 26349, Dubai,United Arab Emirates.Ph: +971-4-3425421Fax: +971-4-3527865Contact Person : Rommel MonteiroDesignation: Sales Director

CNC Machine

COSTA, ITALY(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

DURMAZLAR(Represented by Saif Industrial Machinery Trdg)P. O. Box 34136,Al Wazan Bldg, Caterpillar, SharjahUnited Arab Emirates.Ph: +971-6-5424182 /+971-502024181Fax: +971-6-5424183Contact Person : Fadi Al GhanmaDesignation: Owner

Steel Machineries

All systems can be equipped with gas or oil combustion and above 500 kg/h steam capacity with combination burners. In addition we offer steam generators with electrical heating.

All the Certuss steam generators are type-examination tested in accordance with the European Pressure Equipment Guideline 97/23/EC. Certuss is also ASME certified.

The product range is completed by the components produced in-house, including raw boilers, pressure systems, burner equipment and electrical control units.

Upon request, we supply our steam generators as a ready-to-operate pre-assembled unit complete with accessories. Steam is an indispensable source of energy in laundries, dry cleaning, breweries and dairy factories as well as in textile, food and beverage industries, chemical and pharmaceutical industries, cosmetic, hospitality & healthcare.

COMEVA, SPAIN(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director


320Stand No.

255Stand No.

320Stand No.

521Stand No.

21mtex oman 2014

FACOM, France(Represented by Abu Ilyas Trading L.L.C)P. O. Box: 461, P. C. 117, Wadi Kabir,Sultanate of Oman.Ph: +968-24814979Fax: +968-24816224Contact Person : Antony Puthur JoseDesignation: General Manager

Feeler, Taiwan(Represented by Thompson International Machinery Trading LLC)106 Bank Street Building, P. O. Box 26349, Dubai,United Arab Emirates.Ph: +971-4-3425421Fax: +971-4-3527865Contact Person : Rommel MonteiroDesignation: Sales Director

CNC Machine

FELDER, AUSTRIA(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

EMMEGI, ITALY(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

EUROMAC, ITALY(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

EXPERT, France(Represented by Abu Ilyas Trading L.L.C)P. O. Box 461, P. C. 117, Wadi Kabir,Sultanate of Oman.Ph: +968-24814979Fax: +968-24816224Contact Person : Antony Puthur JoseDesignation: General Manager

Industrial & Automotive Tools

255Stand No.

320Stand No.

320Stand No.

315Stand No.

315Stand No.

320Stand No.

22 mtex oman 2014

German Tech Engineering (GTE) FZCP6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +9716 5575516/ 5575517/ 5578852Fax: +9716 5575518Contact Person : Negar KhazeniDesignation: Deputy Manager

German Tech Engineering (GTE) FZC is one of the biggest and well known traders of welding machines and accessories based in United Arab Emirates with office in Sharjah Airport International Free Zone.

Professionally managed limited liability company having huge clientele basis which include steel fabricators, pipe line, oil & gas, contracting & marine companies, armored car and trailer body builders, main dealers & traders.

Proudly as a group of manufacturing and commercial companies established in 1982, German Tech Engineering (GTE) FZC is distributor of TBI Industries and Soyer Stud Welding Machines from Germany, Trafimet and CEA from Italy and Gaam Electric Welding and Cutting Machines in compliance and accordance with ISO, IEC, CE, VDE and EN Standards in order to supply complete types and ranges of welding machines, accessories and consumables for many different countries.

After year of presence and experience in the region, our group policy has been based on producing and selling goods with quality (competitive price and high

FREDDY, U.K.(Represented by A.F.H Tools)P. O. Box 4007, Dubai,United Arab Emirates.Ph: +971-4-3400034Fax: +971-4-3400811Contact Person : Aziz AbbasDesignation: Director

Coolant filtration system

Fronius, Austria(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of OmanPh: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

MIG/MAG, TIG, MMA Welding Machines & Cladding & Automation Systems

Gaam Electric, Iran(Represented by German Tech Engineering (GTE) FZC)P6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +971-6-5575516/ 5575517/ 5578852Fax: +971-6-5575518Contact Person : Negar KhazeniDesignation: Deputy Manager


301Stand No.

501Stand No.

433Stand No.

433Stand No.

23mtex oman 2014

24 mtex oman 2014

quality machines compatible to the regional climatic conditions) as well as quantity (after sales services to customer’s satisfaction). Considering all the above, we have been able to achieve negotiable share of the regional market in UAE and GCC countries in provision of welding equipment and accessories for all the relative industries.

Ghorfa , Arab-German Chamber of Commerce and IndustryGarnisonkirchplatz 1D-10178 Berlin,Germany.Ph: +49-30-27 89 07-11Fax: +49-30-27 89 07-49

The Ghorfa Arab-German Chamber of Commerce and Industry is the competence center for business relations between Germany and the Arab World. Since almost 40 years, the chamber is successfully committed to promoting business relations in the fields of trade, industry, finance and investment.

Based on its invaluable heritage and its ambitious commitment, the Ghorfa has a powerful network consisting of both institutional and entrepreneurial decision-makers and policy shapers from the Arab countries and from Germany. These close connections and effective collaborations enable Ghorfa to deliver a broad portfolio of high-quality services to its members in order to strengthen business relations among their members and within the wider Arab-German business community. The main focus is to enhance networking and communication as well as providing relevant information.

GIBEN, ITALY(Represented by Simco Industrial Machinery Trd. Co. LLC)P. O. Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

Heinz Soyer GmBH,(Represented by German Tech Engineering (GTE) FZC)P6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +971-6-5575516/ 5575517/ 5578852Fax: +971-6-5575518Contact Person : Negar KhazeniDesignation: Deputy Manager

Stud Welding Machines

Hilti, Liechtenstein(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100 Muscat, Sultanate of OmanPh: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Measuring Systems, Drilling and Chiseling systems, Diamond drilling and cutting


445Stand No.

320Stand No.

433Stand No.

501Stand No.

For marketing enquiries contact: Shivkumar: 99267159 / Girija: 99279359

OMAN›S FIRST & ONLY

QUARTERLY BI-LINGUAL

B2B MAGAZINE

26 mtex oman 2014

Intercable, SFE, Landis & Gyr (Germany, France)(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of Oman.Ph: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Cable Termination Tools, Electrical Safety Tools & Accessories, Kilowatthour Meters etc.

Headlines Advertising LLC (Industrial Products & Services Catalogue)P. O. Box 341, P. C. 114, Muscat, Sultanate of Oman.Ph: +968- 24567188 Fax: +968- 24567288Contact Person : P.J. MenonDesignation: Branch Manager

Industrial Products & Services Catalogue is a reference book with two separate editions – Gulf & Indian covering the Oil & Gas and Construction sectors in the Middle East and India with the head office in Dubai & with branches in Oman (Muscat), Kuwait, Saudi Arabia (Dammam, Jeddah & Riyadh), Bahrain and India (Mumbai & Bangalore).

We have now introduced Asia’s first B2B Portal namely the www.ipscasia.com.

systems, Screw fastening systems, Direct Fastening Systems, Anchor Systems, Firestop Systems etc.

Hiwin Mikrosystems, Taiwan(Represented by Unigroup FZE)M6-02, Rasana Building, SAIF Zone,Sharjah,United Arab Emirates.Ph: +971-6-5578386Fax: +971-6-5578387Contact Person : Vivian KoneriDesignation: Business Development Mgr.

HUVEMA, HOLLAND(Represented by A.F.H Tools)P. O. Box 4007, Dubai,United Arab Emirates.Ph: +971-4-3400034Fax: +971-4-3400811Contact Person : Aziz AbbasDesignation: Director

Machine tools

igus GMBH, Germany(Represented by Unigroup FZE)M6-02, Rasana Building, SAIF Zone, SharjahUnited Arab Emirates.Ph: +971-6-557 8386Fax: +971-6-557 8387Contact Person : Vivian KoneriDesignation: Business Development Mgr.

121Stand No.

121Stand No.


301Stand No.

501Stand No.

450Stand No.

27mtex oman 2014

KHK gears, Japan(Represented by Unigroup FZE)M6-02, Rasana Building, SAIF Zone, Sharjah,United Arab EmiratesPh: +971-6-5578386Fax: +971-6-5578387Contact Person : Vivian KoneriDesignation: Business Development Mgr.

Klein(Represented by Reforms Machines & Tools L.L.C)P. O. Box 35558, Dubai,United Arab Emirates.Ph: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

Wood Cutting Tools

Knuth Machine ToolsSchmalenbrook 14, 24647 WasbekGermanyPh: +49 (0) 4321-609-0Fax: +49 (0) 4321-68900Contact Person : RodeloffDesignation: Export Manager

KNUTH Machine Tools is a leading supplier and manufacturer of conventional and CNC machine tools.

Iron Mfg. Tools for Cutting Metals L.L.C.King Faisal Road,Industrial Area 1,United Arab Emirates.Ph: +971-6-7662250Fax: +971-6-7662251Contact Person : Zarnatzi AmpntoulDesignation: Manager and Partner

We supply first class metal band saw blade but the most important service we could offer to our customer is cutting metal solution for all possible metal cutting tasks.

Our customer rely on our permanent high quality level confident that saw blades produced under Honsberg brand meet even highest demands regarding precision reliability and permanent product control.

We would be happy if you are metal band saw blade user to check our stocks and services by contacting our company.

Our aim is to give solution in cutting metal before doing business

Our company Iron Mfg Tools for Cutting Metals LLC is the authorized agent for Honsberg GmbH in the GCC We remain at your disposal for any technical or commercial request.

121Stand No.247Stand No.

605Stand No.

491Stand No.

28 mtex oman 2014

Lantek SMS, Spain(Represented by Unigroup FZE)M6-02, Rasana Building, SAIF Zone, Sharjah,United Arab EmiratesPh: +971-6-5578386Fax: +971-6-5578387Contact Person : Vivian KoneriDesignation: Business Development Mgr.

Lutian Machinery Co. Ltd.No.1 Lutian Road,Hengjie, Luqiao, Taizhou, Zhejiang,China.Ph: +86-576-82620971Fax: +86-576-82645277Contact Person : Tao HongliDesignation: Sales Manager

Lutian Machinery Co. Ltd, depending on the advanced business concept, lean management, leading technology, the high quality products and good services, grows stronger year by year. At present there are over 850 people, and high intermediate technical personnel accounts for above 35%. factory building area covers about 80,000 square meters, property is more than 135 million RMB.

Our sales network covers Europe, South and North America, Southeast Asia and Middle East area etc., our products are exported to more than 60 countries, the annual turnover. It mainly specializes in manufacturing generators and hi-pressure cleaners as well as researching and developing. Also it is one of the biggest manufacturers and exporters for ultrahigh voltage cleaning machines in China.

Key to KNUTH’s success is consistent high quality, technical innovations, decades of experience, and competitive pricing.

A strategically located network of German and international affiliates ensures direct proximity to customers. This ensures a market-wide presence and the availability of expert consultation and service wherever our customers may be located.

To review the complete portfolio of machine tools for sheet metal work and machining, please visit the easy to navigate and very informative company website at www.knuth.de.

Products & ServicesKNUTH is a one-stop source for machine tools and accessories, covering the entire bandwidth of sheet metal work and machining centers, with special focus on:

• Water-Jet Cutting• Laser Cutting• Plasma Cutting• Electric Discharge Machining• CNC Machining• Turning / Milling / Drilling• Sawing• Grinding and Sanding• Sheet Metal Work, Tools, and

Accessories

KNUTH is known for its excellent service. Upon request, our qualified technicians will provide training and hands-on operating instructions for machines at the customer’ site or at our headquarters in Wasbek/Germany.


121Stand No.

631Stand No.

30 mtex oman 2014

such as CNC lathe, CNC milling machine, VMC, FMS, robot, CIM/CMM, lathe, milling machine, shaping machine, slotting machine, hacksaw / bandsaw machine, gear hobbing machine, drilling machine, centerless grinding machine, cylindrical grinding machine, surface grinding machine, presses, shearing machine, welding machines, boring machines, gear shaper machine, pipe bending, wood working machines, etc.

MTT started its business since 1970. MTT is an ISO certified company. More than 9000 satisfied customers.

MTT has vast expertise supplying machines under world bank project, teqip project, national shopping complex, vpp, state fund projects, etc. We are importing machines from England, German, Taiwan, China and selling in India, UAE, Sri Lanka, etc.

Magnescale(Represented by Reforms Machines & Tools L.L.C)P. O. Box 35558, Dubai,United Arab EmiratesPh: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

D.R.O Systems

M.A.Qaiser Industrietechnik GmbH(Represented by Ghorfa , Arab-German Chamber of Commerce and Industry)P. O. Box 2470, 21314 LüneburgGermany.Ph: +49-4178-1214 & 819789Fax: +49-4178-8509Contact Person : M.A.QaiserDesignation: Managing Director

M.A.Qaiser Industrietechnik GmbH is a contractor of a wide range of consumable products (e.g. Welding Consumables, Pipeline High Power Steel Wire Brushes, PPE Products, Welder Leather Protection Clothes, Safety Shoes and Rigger Boots)useable in the Gas-and Oil Industry, Marine & Shipbuilding Industry, Oil and Gas pipelines, Offshore Platforms, Structural Steel Building Companies etc. All roducts are produced acc.to DIN EN,BS, ANSI and ISO standards.

MACHINE TOOLS TRADERS (MADRAS)# 91 ( New # 54 ) Armenian Street,Chennai-600001,Tamil Nadu,India.Ph: +91-44-25220485, 25211711, 25211733Fax: +91-44-25220786Contact Person : Nehal ShahDesignation: Director

MTT is one of the leading dealer / importer / exporter of all types/sizes of machine tools


445Stand No.

495Stand No.

605Stand No.

32 mtex oman 2014

• BOSCH Automotive after-market & service

• BOSCH Power Tools & Accessories with after sales service

• BOSCH Diagnostics• YUASA Stand by Batteries• OSRAM Automotive lighting• KKK Turbo Chargers• KNORR BREMSE• SKF Bearings Automotive• CHAWLYN AMOT VALVES safety solution

with diesel engines shut down values and spark arresters

• ASNU fuel injector system• Thomson Broadcast Television System

The BOSCH Power Tools new era showroom at Al Noor Street, Ruwi is witnessing the modern trend of Power tools consumable business. Power Tools have a significant number of channel partners and available also with leading hypermarkets, Carrefour, ECC etc. The complete solution for construction Industry, wood Industry, Metal Industry along with measuring tools, additional solution CST Berger available in the showroom. Malatan is having a sizeable cliental along with strong market share in Power Tools business a strong network of dealers with in the Sultanate.

METABO, GERMANY(Represented by Technical Supplies International Company LLC)P. O. Box:1827, P. C. 130, Al AthaibahSultanate Of OmanPh: +968-24503915Fax: +968-24503920Contact Person : R.MadhanagopalDesignation: Division Manager

Power Tools

Mahindra Powerol, Genmac (India/ Italy)(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of OmanPh: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Electrical Generators

MALATAN Trading & Contracting LLCP. O. Box 131,P. C. 112,Ruwi, Muscat,Sultanate of OmanPh: +968-24794035 / 4089 / 4901Fax: +968-24794058Contact Person : Ghassan Al AmadDesignation: General Manager

Malatan Trading & Contracting is registered in the Sultanate of Oman as a 100% Omani company owned by ‘Eng. Abdul Hafidh Bin Salim Bin Rajab Al Aujaili’ functioning from last 38 years.

The firm has diversified according to the emerging market of GCC with a substantial clientele.

Ghassan Al Amad is the General Manager and Mr. Marwan Al Amad, Commercial Manager.

The company represents the following traditional leading brands,


501Stand No.

601Stand No.

312Stand No.

33mtex oman 2014

NEW SAFEER TRADING, Muscat & Sohar(Represented by Boltmaster Bldg. Mat. Trdg. LLC)P. O. Box 20186, Ajman,United Arab Emirates.Ph: +971-67482454Fax: +971-67482393 / 7486042Contact Person : Mohit MarwahaDesignation: General Manager

Fasteners, Shelving & Storage, Tools & H/w’s.

OIL AND GAS DIRECTORY M E Dubai,United Arab Emirates.Ph: +971-4-2228700Fax: +971-4-2247847Contact Person : Raveendran GDesignation: Sales Manager

Oil and Gas Directory – Middle East is the only authentic reference guide pertaining to oil, gas, petrochemicals, marine and energy sectors with 24 years of publishing tradition. We strive to bring together buyers and sellers across the world in one single publication. Serving these sectors of the industry has been our endeavor since the directory was launched.

The publication has got a substantial distribution base. With this network, it provides advertisers greater mileage and a wider reach. Like in our earlier editions, for the benefit of the digitally inclined users we are also available on the web as well as the CD – Rom. For more information and details visit www.oilandgasdirectory.com

MTI LimitedAppleby House,Headley Road, Leatherhead,Surrey, KT22 8PT, UKPh: +44 (0) 1372 372073Fax: +44 (0) 1372 373876Contact Person : Janet BarlowDesignation: General Manager

Launched in 2003, MTI magazine (www.mtimagazine.com) provides a simple method of facilitating used machine tool transactions, and boasts an international monthly circulation of 20,000.

The MTI family has been further strengthen with the launch of its machine listing website (www.machinespotter.com) now hosting over19,000 machines online.

MTI’s use of full colour machine photo panels, offered at low cost, together with the first real weekly international circulation, has revolutionised the way used machine tools are bought and sold.

With a global circulation that stretches across Eastern Europe, the Middle East and the Far East as well as the UK, Western Europe and North America.

MTI addresses the needs of a truly worldwide manufacturing audience, whatever the language.

245Stand No.607Stand No.

125Stand No.

34 mtex oman 2014

solutions provider, offering a dedicated portfolio of opportunities to maximise visibility and multiply contacts and leads throughout the GCC: local, regional, global and industry focused platforms.

With an extensive directories offering – Yellow Pages Bahrain, Yellow Pages Qatar, The Gulf Directory, Arab Banking & Finance, amongst others – supported by the largest distribution network throughout the GCC, advertisers benefit from Primedia International’s publishing expertise.

Primedia International has also developed a strong digital offering to support businesses in their web-based activities with tailor-made solutions to increase traffic and visibility: website and app development, data management and an extended portfolio of advertisement opportunities on leading portals www.yellowpages.bh, www.yellowpages.qa, or www.ArabBankingFinance.com.

PSI Products GmbH(Represented by Ghorfa , Arab-German Chamber of Commerce and Industry)Ulrichstrasse 25,72116 Mössingen,GermanyPh: 0 049 (0)7473 3781 0Fax: 0 049 (0)7473 3781 35Contact Person : Mr.Kishore PradhanDesignation: Sales Manager Middle East

Fundamentally, the connections between us and others are what keep things working. Any lifeline, however influential or successful, is heavily dependent on the strength and stability of these crucial connections.

OMEC, ITALY(Represented by Simco Industrial Machinery Trd. Co. LLC)P.O Box 7281,Industrial Area # 2 Sharjah,United Arab Emirates.Ph: 00971-6-5323424Fax: 00971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

ORION, OMAN(Represented by Technical Supplies International Company LLC)P. O. Box 1827, P. C.130,Al Athaibah.Sultanate of OmanPh: +968-24503915Fax: +968-24503920Contact Person : R.MadhanagopalDesignation: Division Manager

Construction Tools

Primedia International Oman LLC Office 219, Block A,Hatat House, Wadi Adai,Sultanate of Oman.Ph: +968- 24560422Fax: +968- 24565852Contact Person : Mr. A K DasDesignation: General Manager

Primedia International is a leading media

312Stand No.


320Stand No.

455Stand No.

445Stand No.

36 mtex oman 2014

wide variety of investments, introducing advanced technologies, human resources development, productivity enhancement, developing international trade, and boosting exports are all now part of PEIE’s mission. All these efforts play a significant role in achieving the strategic objectives of Oman’s “Vision 2020”.

PEIE invites all investors from within and outside the Sultanate to set up their projects in our industrial estates and to enjoy the various incentives and value adding services.

Reforms Machines & Tools L.L.CP. O. Box 35558,Dubai.United Arab EmiratesPh: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

REFORMS Machines and Tools [RMT] is one of Middle East’s Leading Manufacturers, Dealers, Distributors and Stockist of an extensive range of high quality Materials, Tools, Industrial hardware, Scaffolding that have an intensive supply to Marine & Oil field companies, Production Plants, Turnkey project developers, Construction companies, Repair and Maintainence wokshops, Medium to Large sized machine shops and traders With a large inventory and its own fleet of vehicles ranging from Small Pickups of 1 Ton capacity to Heavy Duty trailers of upto 60

Quality is measured by the durability of connections, and by the efficiency of how components interact with each other. The human element plays a pivotal role here from the idea, through its implementation, to quality control and finally the sale.

We at PSI attach importance to the ability to communicate needs and understand the needs of others. Because it is only with this ability that messages, wishes and expectations can be mutually appreciated and turned into efficient solutions.With our input, vital lifelines are enabled to flow unhindered over a long and successful service life.

Public Establishment for Industrial Estates Rusayl,Sultanae of Oman.Ph: +968-24155150Fax: +968-24449094Contact Person : Hamood Al BalushiDesignation: Head of Omani Products Department

The first industrial estate in the Sultanate of Oman was established at Al Rusayl in the year 1983. As new industrial estates were set up, the Public Establishment for Industrial Estates (PEIE) was formed a decade later to give substantial impetus to industrial development in the country.

Since then PEIE has transformed into an organisation with a vision to enhance Oman’s position as a leading regional centre of manufacturing, ICT, innovation and entrepreneurship excellence. Attracting a


111Stand No.

605Stand No.

37mtex oman 2014

SAIF INDUSTRIAL MACHINERY TRDGP. O. Box 34136,United Arab EmiratesPh: +971-6-5424182 / +971-502024181Fax: +971-6-5424183Contact Person : Fadi Al GhanmaDesignation: Owner

We are striving more than ever for success, working smarter not harder. Our people listen and respond to your business challenges. SAIF Industrial Machinery Trading we analyze your production requirements and provide high technology machine solutions. With offices in Qatar and Dubai, SAIF Industrial Machinery Trading is one of the leading distributors for steel machineries, wood working machineries, Aluminum Machineries and Marble Machineries with one- stop- shop for all your requirements, throughout GCC and Middle East. We offer one of the largest ranges of the best industrial machines available in the industry. Whether you are small shop or a large corporation, we focus on your individual production requirements to make sure we provide the best solution possible We are staffed with professionals backed by strong manufacturing, engineering, and sales backgrounds in the machinery. In addition to distributing the most innovative steel Machineries, wood working Machineries, Aluminum Machineries and Marble machineries, we provide exceptional before and after-sales support including training, parts availability and technical service.

Tons capacity we can cover all your delivery and transportation needs in matter of hours. With exports to Saudi Arabia, Oman, Bahrain, Qatar, India, Africa and Kuwait we are expanding our base from our headquaters in Dubai.

We also IMPORT & STOCK Critical Industrial and Construction Products

• Non – Ferrous and Ferrous Metals like BRONZE, GUN-METAL, BRASS, CAST IRON, COPPER Etc.

• Teflon Rods & Sheets AND Nylon Rods of Varied Sizes

• Welding Consumables and Accessories• Wide range of Safety Products

ROBERT BOSCH GmbH, Germany(Represented by MALATAN Trading & Contracting LLC)P. O. Box No 131,P.C. 112,Ruwi, Muscat, Sultanate of OmanPh: +968-24794035 / 4089 / 4901Fax: +968-24794058Contact Person : Ghassan Al AmadDesignation: General Manager

Rontgen, Germany(Represented by Reforms Machines & Tools LLC)P. O. Box 35558, Dubai,United Arab Emirates.Ph: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

Band-saw Blades/ Hacksaw

601Stand No.

605Stand No.

320Stand No.

38 mtex oman 2014

Sigma, Taiwan (Represented by Thompson International Machinery Trading LLC)106 Bank Street Building, P.O. Box 26349,Dubai,United Arab EmiratesPh: +971-4-3425421Fax: +971-4-3527865Contact Person : Rommel MonteiroDesignation: Sales Director

SIMCO INDUSTRIAL MACHINERY TRD. CO. LLCP. O. Box 7281,Industrial Area # 2 Sharjah,United Arab EmiratesPh: +971-6-5323424Fax: +971-6-5323422Contact Person : Issa AhmedDesignation: Managing Director

Simco is the largest & strongest machinery trading company in the whole GCC countries for over 20 years of success in the gulf region for all type of industrial machineries for wood working, steel, aluminium & glass machines.

Satherm GmbH(Represented by Ghorfa , Arab-German Chamber of Commerce and Industry)Werner-von-Siemens-Str.37D-66793 SaarwellingenGermanyPh: +496838/9808-0Fax: +496838/9808-88Contact Person : Jürgen OpitzDesignation: Director

We are a German company specilized in International supply of industrial spare parts of German, Japanese, American origins….Spare partsin all fields sucha as electric, electronic, mechanic, hydraulic, instrumentation, etc…For the construction and the maintenance of industrial plants.

SHANGHAI MINGLONG IMPORT AND EXPORT CO.,LTD.Room 201, Building A,No.1514, ChangYang Road, Shanghai,ChinaPh: +86-21-55670035Fax: +86-21-55670171*8007Contact Person : Yuan ShiceDesignation: General Manager

Our main business is importing and exporting tools & hardware etc

255Stand No.


445Stand No.

627Stand No.

320Stand No.

International Metalworking News – Middle East & Africa print editions and digital e-magazines facilitate technology transfer by providing readers in English (with highlights in Arabic), editorial about industry news and trends, with detailed technical information for real-world applications in metal forming, laser technology, welding, metal cutting, tooling and work holding, measurement and inspection, and CAD/CAM Software.

The multimedia platform includes biweekly e-newsletters, a metalworking website with daily updates and online exclusives, and fully interactive magazine Apps including video links on iTunes and Google Play.

To learn how to get more high quality sales leads, please contact:Toll Free Hotline: 800-820-0083 (within Mainland China) 800-1122-8811 (outside of Mainland China)

Mr. Mike Hay, PresidentT e l : +852 2369 8788 Ext 11Email: [email protected]

Digital Editions include embedded videos and interviews from trade shows and factory visits

Anytime, Anywhere on ANY device

Scan this QR code to download our APP

Reach the World’s Fastest Growing Market for the Metalworking Industry

• Language: English • Total Readership: 18,450 • Frequency: 6x a year

40 mtex oman 2014

Spectra Precision, USA/ Japan(Represented by Bin Salim Enterprises LLC)P. O. Box 808, P. C. 100, Muscat, Sultanate of Oman.Ph: +968-22084500 , 22084604Fax: +968-24561193Contact Person : Hisham Aflah Al-RawahyDesignation: DGM

Surveying Instruments- GNSS (Base-Rover), GIS Handheld instruments, Total Station, Autolevel, Theodolite & allied Accessories.

Speed Tools, Taiwan (Represented by Thompson International Machinery Trading LLC)106 Bank Street Building, P.O. Box 26349,Dubai,United Arab EmiratesPh: +971-4-3425421Fax: +971-4-3527865Contact Person : Rommel MonteiroDesignation: Sales Director

Cutting Tools

SPERONI, ITALY(Represented by Technical Supplies International Company LLC)P. O. Box 1827 P. C.130, Al AthaibahSultanate of OmanPh: +968-24503915Fax: +968-24503920Contact Person : R. MadhanagopalDesignation: Division Manager

Pumps,Generators,Compressors

Sun-Bird(Represented by Reforms Machines & Tools LLC)P.O Box 35558, Dubai,United Arab Emirates.Ph: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

Metal Abrasives

TAEGUTEC, KOREA(Represented by A.F.H Tools)P.O. Box 4007, DubaiUnited Arab EmiratesPh: +971-4-3400034Fax: +971-4-3400811Contact Person : Aziz AbbasDesignation: Director

TBi Industries, Germany(Represented by German Tech Engineering (GTE) FZC)P6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +971-65575516 / 5575517 / 5578852Fax: +971-6-5575518Contact Person : Negar KhazeniDesignation: Deputy Manager

Welding and Plasma Cutting Torches

501Stand No.

255Stand No.

312Stand No.

605Stand No.

301Stand No.

433Stand No.


41mtex oman 2014

Technical Supplies International Company LLCP. O. Box 1827, P. C.130, Al Athaibah,Sultanate of OmanPh: +968-24503915Fax: +968-24503920Contact Person : R. MadhanagopalDesignation: Division Manager

Technical Supplies International Company LLC (TECS) is a major, diversified distributor of Electrical, Instrumentation, Lighting, Mechanical (Utilities) and Oil & Gas (Mechanical) products within the Sultanate of Oman. TECS has its Head Office based at Ghala and has a showroom in Salalah. TECS has been ISO 9001:2008 certified by the leading certification body Bureau Veritas.

TECS develops a fine-tuned and successful synergy with its customers by providing innovative technical solutions resulting in high customer satisfaction.

TECS is proud of its strong client focus and long-term customer relationships. TECS takes immense pride in being called ‘Solution Providers’ and thoroughly understands client’s business requirements to provide cost effective & bespoke solutions.

Technoflow(Represented by Reforms Machines & Tools L.L.C)P. O. Box 35558, DubaiUnited Arab EmiratesPh: +971-4-3332278Fax: +971-4-3331914Contact Person : Gurpreet GouriDesignation: Director

Carbide Tipped Saw Blades

Thompson International Machinery Trading LLC106 Bank Street Building, P.O. Box 26349,Dubai,United Arab Emirates.Ph: +971-4-3425421Fax: +971-4-3527865Contact Person : Rommel MonteiroDesignation: Sales Director

Thompson International started operations in UAE in 2006 as a sole distributor of various CNC and conventional machines of Hardinge Bridgeport. Gradually it expanded its operations and has become authorised and exclusive distributors of many other brands of Asia and Europe.

The company in UAE is solely dedicated to sales, marketing and servicing of CNC and Conventional machineries since its inception. Due to the highly experienced and qualified management and highly skilled and experienced sales and after sales service team, Thompson International owns a very respectable place in GCC engineering sector.

Thompson International has collaboration

255Stand No.

312Stand No. 605Stand No.

42 mtex oman 2014

with around 24 suppliers around the globe. Our esteemed suppliers are the world’s No. 1 in their respective field.

The company possesses exclusive and authorised agencies of leading machine tool manufacturers like FEELER, Nicolás Correa, Sigma, Yu Shine, CNC Takang, Mega Machine, AMG, Joemars, Gurutzpe and Julihuang. In addition to the above, we also do represent many other suppliers in this region like Eastar, L&W, and few others. Thompson International also offers AMC depending upon the type of machinery / equipment at company premises.

The various products of Metal Working Machinery that company sales and services in the region are: CNC Machining Centers (upto 20 meter); CNC Double Column Machining Center (upto 5.2 meter); CNC Turning Centers (up to 6 meters); CNC Vertical Turning Centers (up to 3 meters); CNC EDM/ Wire EDM Machines (upto 1200 ms); CNC Multi-Spindle Drilling Machines (up to 6 meters); CNC / Conventional Oil Country Lathe (up to 20 meters); CNC/ Precision Surface Grinding Machines (upto 2 meters); CNC/ Precision Cylindrical Grinding (up to 1000 x 6000 mm); CNC Tool and Cutter Grinder (up to 600 x 200 mm); CNC Horizontal Boring (up to 20 ms); Conventional Horizontal Boring (up to 2.5 x 2 ms); Precision & Heavy Duty Conventional Lathe (up to 6 meters); Precision & Heavy Duty Conventional Milling machines (up to 500 x 2500 mm); Conventional Radial/ Pillar / Multi-spindle Drilling Machines; Automatic Band Saw Cutting Machines; Automatic Circular Saw Cutting Machines

The major sectors which we cater to in the region are: Oilfield Equipment Maintenance Industry; Precision Component Manufacturing Industry; Mould & Die Making Industry; Tool Rooms; Radiators

Manufacturing Industry; Heat Exchanger Manufacturing Industry; Metal Furniture Manufacturing Industry; High Production Manufacturing Industry; Metal Fabrication Industry; Aluminium Extrusion Industry; Scaffolding Manufacturing Industry

Trafimet SpA,(Represented by German Tech Engineering (GTE) FZC)P6-072, Sharjah Airport International Free Zone (SAIF-Zone), Sharjah,United Arab Emirates.Ph: +971-65575516 / 5575517 / 5578852Fax: +971-6-5575518Contact Person : Negar KhazeniDesignation: Deputy Manager

Welding and Cutting Torches

TSCHORN, GERMANY(Represented by A.F.H Tools)P. O. Box 4007, Dubai,United Arab Emirates.Ph: +971-4-3400034Fax: +971-4-3400811Contact Person : Aziz AbbasDesignation: Director

Measuring Instruments

433Stand No.

301Stand No.


43mtex oman 2014

the final execution. We value our customers and ensure all aspects of our projects are dealt with professionally and executed efficiently.

XILIN, China(Represented by Abu Ilyas Trading L.L.C)P. O. Box 461, P. C. 117, Wadi Kabir,Sultanate of Oman.Ph: +968-24814979Fax: +968-24816224Contact Person : Antony Puthur JoseDesignation: General Manager

Material Handling Equipment

Zhejiang Finetouch ElectronicTechnology Co.,Ltd.17th Building, Xingxing Electronics Industrial Park, Jiaojiang District, Taizhou City,Zhejiang Province,China.Ph: +86-576-89089223Fax: +86-576-89892021Contact Person : Tao JindanDesignation: Sales Manager

Zhejiang Finetouch Electronic Technology Co.,Ltd. is specializing in smart home products, inteligent electronic locks and lock cylinder, with a complete system of R&D, production, sales and service. The two main brands are Koachi and Finetouch.

TYROLIT, AUSTRIA(Represented by Technical Supplies International Company LLC)P. O. Box 1827 P. C. 130, Al AthaibahSultanate Of Oman.Ph: +968-24503915Fax: +968-24503920Contact Person : R.MadhanagopalDesignation: Division Manager

Construction Tools and Abrasives

UNIGROUP FZEM6-02, Rasana Building, SAIF Zone, SharjahUnited Arab EmiratesPh: +971-6-5578386Fax: +971-6-5578387Contact Person : Vivian KoneriDesignation: Business Development Mgr.

Unigroup is a well established Free Zone Enterprise in the UAE since Nov 2006. Our core business is to provide Industrial Automation solutions to our clients.

We provide support and services for Crane systems, Robotic systems, CNC machines for fabrication and cutting, Coordinate Measuring Machines, Gantry systems, Pipe coating machines, Aluminum Extrusion machines, Concrete block manufacturing industries, Bottling companies, Armored Vehicle Accessories, Medical Bed and Entertainment Park Equipment to name a few.

Unigroup provides you with complete professional service, from survey through to

312Stand No.

121Stand No.

315Stand No.

621Stand No.

44 mtex oman 2014

Index of Products and Services

Cleaning MachineryArwani Trading CompanyMTI LimitedTechnical Supplies International Co LLCUnigroup FZE

CranesMTI LimitedUnigroup FZE

Cutting MachineryA.F.H ToolsArwani Trading CompanyBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZCKnuth Machine ToolsMachine Tools Traders (Madras)MTI LimitedSaif Industrial Machinery Trdg.Technical Supplies International Co LLCThompson International Machinery Trading Unigroup FZE

Drilling MachineryA.F.H ToolsArwani Trading CompanyAtad International Gen. Trdg. LLCBin Salim Enterprises LLCKnuth Machine ToolsMachine Tools Traders (Madras)MTI LimitedSaif Industrial Machinery Trdg.Technical Supplies International Company Thompson International Machinery Trading Unigroup FZE

Fabrication MachineryArwani Trading CompanyBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZCMachine Tools Traders (Madras)MTI LimitedSaif Industrial Machinery Trdg.Technical Supplies International Co LLCThompson International Machinery Trading Unigroup FZE

Grinding MachineryArwani Trading CompanyBin Salim Enterprises LLCKnuth Machine ToolsMachine Tools Traders (Madras)MTI LimitedSaif Industrial Machinery Trdg.Technical Supplies International Co LLCThompson International Machinery TradingUnigroup FZE

Metalworking MachineryArwani Trading CompanyBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZCMachine Tools Traders (Madras)MTI LimitedSaif Industrial Machinery Trdg.Technical Supplies International Co LLCThompson International Machinery Trading Unigroup FZE

Moulding MachineryArwani Trading CompanyBin Salim Enterprises LLCMTI LimitedSaif Industrial Machinery Trdg.Thompson International Machinery Trading Unigroup FZE

Plastic Injection MachineryMTI LimitedUnigroup FZE

Woodworking MachineryArwani Trading CompanyBin Salim Enterprises LLCMachine Tools Traders (Madras)MTI LimitedSimco Industrial Machinery Trdg. Co LLCTechnical Supplies International Co LLCUnigroup FZE

Workshop MachineryArwani Trading CompanyBin Salim Enterprises LLC

45mtex oman 2014

Knuth Machine ToolsMachine Tools Traders (Madras)MTI LimitedSimco Industrial Machinery Trdg. Co LLCTechnical Supplies International Co LLC

Control EquipmentUnigroup FZE

Conveying EquipmentUnigroup FZE

Generator SetsArwani Trading CompanyBin Salim Enterprises LLCLutian Machinery Co. Ltd.Technical Supplies International Co LLC

Heavy EquipmentMTI Limited

Industrial MixersArwani Trading Company

LiftsUnigroup FZEArwani Trading Company

Loading EquipmentM.A.Qaiser Industrietechnik GmbHMTI LimitedUnigroup FZE

Manufacturing EquipmentArwani Trading CompanyGerman Tech Engineering (GTE) FZCMTI Limited

Material Handling EquipmentAbu Ilyas Trading LLC

Printing & Packaging SystemsUnigroup FZE

Production EquipmentArwani Trading Company

MTI Limited

Safety EquipmentArwani Trading CompanyBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbH

Welding EquipmentArwani Trading CompanyAtad International Gen. Trdg. LLCBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZCM.A.Qaiser Industrietechnik GmbHMTI LimitedUnigroup FZE

Construction ToolsAbu Ilyas Trading LLCAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCTechnical Supplies International Co LLC

Cutting ToolsAbu Ilyas Trading L.L.CAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZCIron Mfg. Tools for Cutting Metals LLCMTI LimitedReforms Machines & Tools LLCTechnical Supplies International Co LLCThompson International Machinery Trading LLC

Detection ToolsAfaq Al Musana Trading LLCBin Salim Enterprises LLCUnigroup FZE

Electric ToolsAbu Ilyas Trading LLCAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCMalatan Trading & Contracting LLCTechnical Supplies International Co LLC

46 mtex oman 2014

Hand ToolsAbu Ilyas Trading LLCA.F.H ToolsAfaq Al Musana Trading LLCArwani Trading CompanyMTI LimitedTechnical Supplies International Co LLC

Hydraulic ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCMTI LimitedReforms Machines & Tools LLC

Magnetic ToolsAfaq Al Musana Trading LLCMTI LimitedTechnical Supplies International Co LLC

Measuring ToolsAbu Ilyas Trading L.L.CA.F.H ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbHMti LimitedReforms Machines & Tools L.L.CUnigroup FZE

Pneumatic ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbhMti LimitedTechnical Supplies International Co LLC

Power ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbhMalatan Trading & Contracting LLCMTI LimitedTechnical Supplies International Co LLC

Precision ToolsA.F.H ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCMTI LimitedUnigroup FZE

Specialty ToolsAbu Ilyas Trading LLCAfaq Al Musana Trading LLCBin Salim Enterprises LLCMTI LimitedShanghai Minglong Import and Export Co. Ltd.

Woodworking ToolsAfaq Al Musana Trading LLCArwani Trading CompanyBin Salim Enterprises LLCTechnical Supplies International Company LLC

Adhesives and SealantsArwani Trading CompanyBin Salim Enterprises LLCTechnical Supplies International Company LLC

Building HardwareArwani Trading CompanyTechnical Supplies International Co LLC

CablesUnigroup FZE

Electrical ProductsBin Salim Enterprises LLCTechnical Supplies International Co LLCUnigroup FZEZhejiang Finetouch Electronic Technology Co. Ltd.

Industrial AbrasivesArwani Trading CompanyBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbHReforms Machines & Tools LLCTechnical Supplies International Co LLC

Index of Products and Services

47mtex oman 2014

Machine PartsGerman Tech Engineering (GTE) FZCMTI LimitedUnigroup FZE

Paints and CoatingsArwani Trading CompanyBin Salim Enterprises LLC

Screws and NutsArwani Trading CompanyBin Salim Enterprises LLCGerman Tech Engineering (GTE) FZC

Compressor and Air BlowerArwani Trading CompanyBin Salim Enterprises LLCTechnical Supplies International Company LLCUnigroup FZE

High Pressure Forged FittingsBin Salim Enterprises LLCM.A.Qaiser Industrietechnik GmbH

Pipes and ConnectorM.A.Qaiser Industrietechnik GmbH

PSI Products GmbHUnigroup FZE

Pump FittingsArwani Trading CompanyLutian Machinery Co. Ltd.Unigroup FZE

Stainless Steel PipeBin Salim Enterprises LLC

TubesM.A.Qaiser Industrietechnik GmbHPSI Products GmbH

Valves & ActuatorUnigroup FZE

Welding FittingsArwani Trading CompanyLutian Machinery Co. Ltd.MTI LimitedM.A.Qaiser Industrietechnik GmbH

48 mtex oman 2014

About the Organiser

Global Exhibitions & Conferences LLC (GEC)

GEC, UFI member is a full-service exhibition and conference management company that combines creative innovation with logistical and organizational expertise to help the clients achieve their strategic objectives.

GEC’s rapid ascent into the ranks of the leading exhibitions and professional conference organizers in the Sultanate of Oman is a testament to its success in delivering high-impact events. With meticulous attention to detail and the reputation for exemplary customer service, GEC’s seasoned professionals work collaboratively with clients to conceive, plan and execute events with lasting impressions.

GEC’s standing as one of Oman’s leading event management firms is borne out by its success in assembling an outstanding portfolio of trade expos, exhibitions and conferences, many of which have since evolved into signature industry events. They include high-profile exhibitions, such as the Home Show, Oman Office Show and MTEX Oman, all UFI approved events. GEC also hosts a string of high-profile conferences such as Drainage Rehabilitation & Flood Control and Offshore Oman.

For more information on our range of events, please visitwww.gecexpo.com or email: [email protected].

50 mtex oman 2014

8 - 10 December 2014 · 2015. 10. 1. · mtex oman 2014 1 The 3rd International Exhibition For...

Documents

Transcript of 8 - 10 December 2014 · 2015. 10. 1. · mtex oman 2014 1 The 3rd International Exhibition For...