715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR · 715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR...
Transcript of 715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR · 715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR...
www.lauridsenindustri.com
715 XS VALVE WITH SA / SA-X05 ELECTRICACTUATOR
Model/Ref: 272402023000
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 1/3 Ref. 715XS+SA05 GB Rev. 1 Date 03/2012
0035
CHARACTERISTICS The stainless steel 715XS+SA05 2-way ball valve is dedicated to the automatic shut-off of uncharged industrial fluids. This full bore ball valve has an antistatic device and is certified according to the EC and ATEX standards (with SA-X). The ISO 5211 pad enables the direct mounting of the SA05 electric actuator. It is perfectly adapted for an indoor or outdoor industrial use.
AVAILABLE ITEMS
1.4408 stainless steel (A351 CF8M) body Size ½ ’’ to 2’’ BSP threaded connections Voltages: 12 V DC, 24 V AC/DC, 230 V AC
LIMITS OF USE
Max. allowable pressure (PS) 63 bar (20 °C)
Min./max. allowable temperature (TS) -10 °C / +180 °C
Room temperature -20 °C / +70 °C
Service S2 – 70%
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive
½’’ and ¾’’ : excluded Valve testing EN 12266
1’’ to 2’’ : category III TÜV #0035 Material certificate EN 10204
Size EN 12516-1 Actuator attachment ISO 5211
Alloy grade EN 1503-1
ATEX Directive Valve SIRA #0518 II 2G/D Tx for zones 1,2,21 and 22
Actuator (SA-X option) KEMA #0344 II 2G EEx d II C T4 for zones 1 and 2
3.1Cert.
ISO9001 IP 67
Range of application
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 1/3 Ref. 715XS+SA05 GB Rev. 1 Date 03/2012
0035
CHARACTERISTICS The stainless steel 715XS+SA05 2-way ball valve is dedicated to the automatic shut-off of uncharged industrial fluids. This full bore ball valve has an antistatic device and is certified according to the EC and ATEX standards (with SA-X). The ISO 5211 pad enables the direct mounting of the SA05 electric actuator. It is perfectly adapted for an indoor or outdoor industrial use.
AVAILABLE ITEMS
1.4408 stainless steel (A351 CF8M) body Size ½ ’’ to 2’’ BSP threaded connections Voltages: 12 V DC, 24 V AC/DC, 230 V AC
LIMITS OF USE
Max. allowable pressure (PS) 63 bar (20 °C)
Min./max. allowable temperature (TS) -10 °C / +180 °C
Room temperature -20 °C / +70 °C
Service S2 – 70%
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive
½’’ and ¾’’ : excluded Valve testing EN 12266
1’’ to 2’’ : category III TÜV #0035 Material certificate EN 10204
Size EN 12516-1 Actuator attachment ISO 5211
Alloy grade EN 1503-1
ATEX Directive Valve SIRA #0518 II 2G/D Tx for zones 1,2,21 and 22
Actuator (SA-X option) KEMA #0344 II 2G EEx d II C T4 for zones 1 and 2
3.1Cert.
ISO9001 IP 67
Range of application
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/3 Ref. 715XS+SA05 GB Rev. 1 Date 03/2012
CONSTRUCTION
# Item Material # Item Material
1 Body Stainless steel A351 CF8M /1.4408 11 Lever Stainless steel 304
2 End cap Stainless steel A351 CF8M /1.4408 12 Nut Stainless steel 304
4 Seats PTFE+15% Graphite 13 End stop Stainless steel 304
5 Stem Stainless steel 316 14 Sleeve PVC
6 Body gasket PTFE 15 O-ring FKM
7 Washer PTFE 16 Sliding block Stainless steel 304
8 Gland packing PTFE 17 Antistatic device Stainless steel 316
9 Washer Stainless steel 304 18 Spring Stainless steel 316
10 Belleville spring washer Stainless steel 301
DIMENSIONS (mm)
DN A B C D H L J J1 d1 d2 SW
½’’ 15 55 70.9 110 42.3 8 42 50 6 7 9
¾ ’’ 20 76 73.4 110 44.9 8 42 50 6 7 9
1’’ 24.5 83 84.1 135 54 10 42 50 6 7 11
1’’ ¼ 32 91 89.3 165 59.2 10 50 70 7 9 11
1’’ ½ 38 103 109.5 165 71.3 10 50 70 7 9 11
2’’ 50 120 118.9 165 82.9 14.8 50 70 7 9 14
2”½ 65 155 155 300 107 17.1 70 102 9 11 17
3” 80 182 165 335 117 17.1 70 102 9 11 17
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 3/3 Ref. 715XS+SA05 GB Rev. 1 Date 03/2012
ELECTRIC ACTUATION WITH SA05 Suggested standard SA05 actuation under the following conditions: - Electric actuator with an IP 67 epoxy coated aluminium enclosure and steel gears - A minimum 1.3 safety factor compared with the valve nominal torque rating, - A maximum pressure differential up/downstream of 10 bar (=ΔP) Direct mounting of the electric actuator
DN Actuator Power Intensity 230 V AC
Intensity 24 V AC/DC
Operating Time* Standard equipment of the actuator
½ ‘’ SA05 6 W 28 mA 1.8 mA 17 s 2 adjustable limit switches
2 dry auxiliary switches
2 W anti-condensation heater
Actuator thermal cut-out
Manual override by key
Backlit position indicator
Electrical connection: 2 gland packs. M20x1.5
¾ ‘’ SA05 6 W 28 mA 1.8 mA 17 s
1’’ SA05 6 W 28 mA 1.8 mA 17 s
1’’ ¼ SA05 6 W 28 mA 1.8 mA 17 s
1’’ ½ SA05 6 W 28 mA 1.8 mA 17 s
2’’ SA05 6 W 28 mA 1.8 mA 17 s
*Unloaded operating time given for information purpose only. May vary depending on the medium For any other working conditions, please contact us. ACTUATION OPTIONS There are many different options, please contact our commercial department.
1 2 3 4 5
SA05S: Slow closing electric
actuator 70 s
SA05PCU: Regulation actuator 4-20 mA or 0-10 V
SA05RBP: Safety actuator with an integrated battery emergency shutdown
SA05X: Actuator for use in ATEX zones 1 and 2
SR05: Safety spring return
actuator
6 SAPUI electric actuator with feedback potentiometer 7 Thermal dispersion bracket for high temperature fluids 8 100 mm stem extension for pipe insulation (see 500HC model) 9 Electric actuator sized for a maximum pressure differential up/downstream over 10 bar (=ΔP)
10 NA electric actuator with a declutchable manual override by handwheel
ATEX ZONES INSTALLATION It is compulsory to specify if the installation of the automatic valve 715XS+SA-X will take place in ATEX zones 1 or 2 while making the order. Our services will proceed to the mounting check, to a grounding strip installation and will edit a mounting certificate. Those operations are performed by our proper engineers. Please contact us for further details. It is also compulsory to follow the ATEX zone mounting and maintenance special instructions for motorized valves. The ATEX gland packs and sealing plugs are not provided. Please use the following codes:
ATEX aluminium gland pack M20x1.5 Code 980179 ATEX aluminium sealing plugs M20x1.5 Code 980180
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATOR
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATORELECTRIC ACTUATOR SA05
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Pages 1/3 Ref. FT23010 GB Rev. 7 Date 06/2012
GENERAL DESCRIPTION The SA05 electric actuator is dedicated to the actuation of industrial ¼ turn valve. The torque value is 50 Nm. With a compact design, an IP 67 cast aluminium enclosure and an epoxy protection, the SA electric actuator is especially adapted to the actuation of ball valves and butterfly valves in outdoor or indoor areas. The SA05 is equipped with a visual 3D position indicator and a manual override driven by an Allen key. It complies with the EN 15714-2 standard.
AVAILABLE ITEMS Voltage: 230 V AC (50-60 Hz), 24 V AC/DC and 12 V DC
LIMITS OF USE
Protection rating IP 67
Temperature range -20 °C / +70 °C
Service S2 - 70%
MECHANICAL CHARACTERISTICS
Gears Treated steel pinions
Torque 50 Nm
Rotation angle 90° +/-5°
Declutching N/A
Manual override Allen key (except for SA05S)
Electric actuator SA05 SA05S
Voltage 230 V AC 24 V AC/DC 12 V DC 230 V AC 24 V AC/DC
Torque 50 Nm
Operating time 17 s 17 s 17 s 100 s 100 s
ISO 5211 pad F03/F05/F17 star 14
ELECTRICAL CHARACTERISTICS
Motor protection Thermal cut-out Anti-condensation 2 W heater
Limit switches 2 adjustable switches Electrical connection 2 gland packs
M20x1.5 Auxiliary switches 2 adjustable dry switches
Electric actuator SA05 SA05S
Voltage 230 V AC 24 V AC/DC 12 V DC 230 V AC 24 V AC/DC
Power 6 W 15 W 15 W 6 W 6 W
Intensity 0.24 A 1.8 A 3.6 A 0.24 A 1.8 A
ISO
9001IP 67
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATORELECTRIC ACTUATOR SA05
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Pages 2/3 Ref. FT23010 GB Rev. 7 Date 06/2012
CONSTRUCTION
1 Enclosure Polyester coated aluminium
2 Electric motor
3 Gear Treated steel pinions
4 Cover Polyester coated aluminium
5 Position indicator Polycarbonate plastic
6 Condenser
7 Manual override
8 Connection to ground
9 Cable inlet
10 Anti-condensation heater
11 Terminal block
DIMENSIONS (mm)
+45 75 12 62 74 - www.lauridsenindustri.com - Denmark
Ref. 2724020230001160-1168 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Nbr. pages 2/4 Ref. 1160+UM GB Rev. 1 Date 05/2012
DIRECTIVES AND DEVELOPMENT STANDARDS APPLICABLE
Standard Notified bodies Standard
97/23/EC Pressure Equipment Directive Cat. III modules B+C1 # 0409 Valve testing ISO 5208
ATEX Directive II 2G/D Tx zones 1,2,21 and 22 # 0038 Face-to-face dimension ISO 5752 series 20
Flanges dimension EN 1092-1 Sanitary compliance ACS N° 07 ACC LY 504
Actuator attachment ISO 5211
CONSTRUCTION
# Item 1160 1161 1162 1163 1164 1168 1181
1 Body Ductile iron EN GJS-500-7
2 Butterfly DN32-100 Stainless steel A351 CF8M /1.4408
2 Butterfly DN125-400 Ductile iron EN GJS-500-7 Stainless steel A351 CF8M /1.4408 Ductile iron
3 Sleeve EPDM NBR NBR EPDM FKM White NBR NBR
4 Stem SS 420 SS 304 SS 420 SS 304 SS 304 SS 304 SS 420
5 O-ring EPDM NBR NBR EPDM FKM NBR NBR
6 Ring Steel
7 Securing rings /Circlips Steel
8 ISO pad Aluminium
9 Screw Steel 5.6
10 Washer Steel
715 XS VALVE WITH SA / SA-X05 ELECTRIC ACTUATORELECTRIC ACTUATOR SA05
The following data is for information purpose only and may be subject to alteration without prior notice
SECTORIEL S.A. 45, rue du Ruisseau 38290 Saint Quentin-Fallavier – FRANCE Tel.: +33 474 94 90 70 – Fax: +33 474 94 13 95 www.sectoriel.fr / email: [email protected]
Pages 3/3 Ref. FT23010 GB Rev. 7 Date 06/2012
WIRING SCHEME 230 V AC
WIRING SCHEME 24 V AC/DC
OPTIONS
1 SA05X: ATEX area version
2 SA05PIU: feedback potentiometer version
3 SA05CPT: 4-20 mA position transmitter version
4 SA05PCU: 0-10, 2-10 V, 2-20 mA, 4-20 mA regulation card version
5 SA05LCU: local control version
6 SA05RBP: integrated battery emergency shutdown device version
1 Common
2 Anti-condensation heater
3 Closing control
4 Opening control
5 Auxiliary switch closing
6 Auxiliary switch closing
7 Auxiliary switch opening
8 Auxiliary switch opening
1 Common or +
2 Closing control
3 Opening control
4 Auxiliary switch closing
5 Auxiliary switch opening
6 Auxiliary common
7-8 Anti-condensation heater power supply