CONTENTS · 4,703,916 Hydraulic Jack Structural Improvement In One-Way Hydraulic Path In...
Transcript of CONTENTS · 4,703,916 Hydraulic Jack Structural Improvement In One-Way Hydraulic Path In...
One-Year LimitedWARRANTY
2
One-Year LimitedWARRANTY
Features, materials and specifications of Omega products are subject to change without notice. The photos shown in this catalog are forillustrative purposes only and may not necessarily depict the exact configuration of the product, nor are they intended to replace anyinstructions provided with the product. SFA is not responsible for printing errors inadvertently made in the production of this catalog.Please note: Some products require assembly.
UNITED STATES PATENTS
4,077,608 Bottle Jack Using Line Groove By-pass System.
4,703,916 Hydraulic Jack Structural Improvement In One-Way HydraulicPath In Association With Safety Pressure Relief Network.
5,341,723 Reciprocating Pneumatic Motor For Hydraulics.
5,431,369 Hand/Foot Dual Operated Lever Mechanism For Hydraulic Jacks.
5,499,655 One-Way Valve Structure For A Hydraulic Jack.
5,520,400 Storage Case For A Detachable Jack.
5,551,668 Hydraulic Jack With Restorable Lever And Retaining Device.
5,755,099 Hydraulic Circuit System For One-Touch Jack And Its Structure.
5,946,912 Oil Return Loop Of A Hydraulic Cylinder.
Several more patents pending.
ONE-YEAR LIMITED WARRANTY FOR OMEGA BRAND LIFT EQUIPMENT
For a period of one (1) year from date of purchase, SFA. will repair or replace, at its option, without charge, any of its products which failsdue to defect in material or workmanship, or which fails to confirm to any implied warranty not excluded hereby. Performance of anyobligation under this warranty may be obtained by returning the warranted product, freight prepaid, to SFA, Warranty Service Department,10939 Pomona Avenue, Kansas City, MO 64153. Except where such limitations and exclusions are specifically prohibited by applicable law.
(1) The CONSUMER’S SOLE AND EXCLUSIVE REMEDY SHALL BETHE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS ASDESCRIBED ABOVE, and
(2) SFA SHALL NOT BE LIABLE FOR LOSS WHATSOEVER, and
(3) THE DURATION OF ANY AND ALL EXPRESSED AND IMPLIEDWARRANTIES, INCLUDING WITHOUT LIMITATION, ANY WARRANTIESOF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,IS LIMITED TO A PERIOD OF ONE (1) YEAR DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty lasts, so above limitation may not apply to you. Some states donot allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Omega Lift EquipmentCONTENTS
3
Omega Lift EquipmentCONTENTS
Engineered in U.S.A. All items aremanufactured by our QS9000/ISO-9002certified factories to comply with theapplicable American National Standard.
QS9
000
ISO-9
002THESE PRODUCTS ARE LIFTING DEVICES ONLY. ALWAYS
USE APPROPRIATELY RATED JACK STANDS FOR SUPPORTBEFORE WORKING ON OR UNDER THE VEHICLE.
WARNING!
4 SIDE PUMPBOTTLE JACKS
5 AIR-ACTUATED & IN-LINEBOTTLE JACKS
6 SERVICE JACKS
7 AIR/HYDRAULICSERVICE JACKS
9 MAGIC LIFT LONG CHASSISSERVICE JACKS
10 MOTORCYCLE/ATVJACK & ALUMINUMRACING JACK
11 FORKLIFT & TOEJACKS
12 FLOOR STYLETRANSMISSION JACKS
13 TELESCOPICTRANSMISSION JACKS
8 MAGIC LIFTSERVICEJACKS
14 SINGLE STAGEAXLE JACKS
15 DUAL STAGEAXLE JACKS
16 BRAKE DRUMHANDLER &WHEEL DOLLIES
17 JACK STANDSPIN & RATCHET
19 BODYREPAIR KITS
20 FOOT PUMP &PIPE BENDER
21 BENCH, SHOPPRESSES &HAND PUMPS
22 ENGINECRANES &STANDS
18 AUXILIARYSTANDS & SPRING COMPRESSOR
Heavy Duty HydraulicSIDE PUMPBOTTLE JACKS
Heavy Duty HydraulicSIDE PUMPBOTTLE JACKS
Hydraulic system is protected frominternal damage by a patented by-pass mechanism.
Unique cross-type forged release valve assures positive control.
A wide, rugged base providesstability and strength.
Machined and polished cylinders withdie-cut threads provide non-abrasiveleak-free, durable performance.
Fabricated from hard-cast steel withheat-treated critical stress areas.
FEATURES
4
1100002255CC2 Ton Capacity
1100004455CC4 Ton Capacity
1100006655CC6 Ton Capacity
1100008855CC8 Ton Capacity
1100112255CC12 Ton Capacity
1100112299CC12 Ton Capacity(shorty version)
1100220099CC20 Ton Capacity(shorty version)
1100220055CC20 Ton Capacity
Model Capacity Min. Max. Hydraulic Ext. Base Size Base Size G.W.(Ton) Height Height Lifting Screw Length Width (Lbs.)
Specifications: Side Pump Design
1100002255CC 2 7-1/8” 13-3/4” 4-5/8” 2” 3-3/4” 3-5/8” 71100004455CC 4 8-1/8” 15-3/8” 5” 2-3/8” 4” 3-7/8” 91100006655CC 6 8-5/8” 16-3/4” 5-1/4” 2-7/8” 4-3/8” 4” 121100008855CC 8 8-7/8” 17-5/8” 6” 2-3/4” 4-3/4” 4-3/4” 141100112255CC 12 9-1/2” 18-5/8” 6” 3-1/8” 5-1/4” 5-1/8” 181100112299CC 12 6-1/8” 10-5/8” 3” 1-5/8” 5-1/4” 5-1/8” 141100220055CC 20 9-1/2” 18-5/8” 6” 3-1/8” 6-1/4” 5-7/8” 271100220099CC 20 6-1/2” 11-1/4” 3-1/8” 1-5/8” 6-1/4” 5-7/8” 21
Heavy Duty HydraulicAIR-ACTUATED BOTTLE JACKS
Heavy Duty HydraulicIN-LINE BOTTLE JACKSHeavy Duty HydraulicIN-LINE BOTTLE JACKS
Heat-treated extension screw allowslow pick-up height adjustment and
maximum lift height.
A wide, rugged base provides stability and strength.
Easiest accessible pumping systemeliminates off-center pumping force
for the most efficient operation.
U.S. Patented built-in by-pass deviceprotects hydraulic system from over
pumping damage.
Unique cross-type forged release valve assures positive control.
FEATURES
Heavy Duty HydraulicAIR-ACTUATED BOTTLE JACKS
Effortless air operation will greatlyreduce operator fatigue and speed
up the efficiency of garage work.
All air bottle jacks come withchrome plated rams.
A compact, yet powerful Air TurboMotor U.S. Patent No. 5,341,723 isequipped to raise the load to the
desired height efficiently, effortlessly,and safely.
Versatile “Quick Connector” designprovides for easy removal of air hose
from air motor allowing compactstorage or remote operation.
FEATURES
5
1100112288 12 Ton Capacity(shorty version)
1100220088 20 Ton Capacity(shorty version)
11000088008 Ton Capacity
110011220012 Ton Capacity
110022000020 Ton Capacity
Model Capacity Minimum Maximum Hydraulic Ext. Base Size Base Size G.W.(Ton) Height Height Lifting Screw Length Width (Lbs.)
Specifications: In-Line Design
1100008800 8 8-7/8” 17-5/8” 6” 2-3/4” 6-1/4” 3-3/4” 141100112200 12 9-1/2” 18-5/8” 6” 3-1/8” 7” 4-1/4” 191100112288 12 6” 10-3/4” 3-1/8” 1-5/8” 7” 4-1/4” 161100220000 20 9-1/2” 18-5/8” 6” 3-1/8” 7-3/4” 5” 281100220088 20 6-1/2” 11-1/4” 3-1/8” 1-5/8” 7-3/4” 5” 231100330000 30 11” 18” 7” N/A 8-1/8” 6-7/8” 551100550000 50 9-1/2” 13-7/8” 4-3/8” N/A 10-7/8” 7-5/8” 107
1100330000 30 Ton Capacity (not shown)1100550000 50 Ton Capacity (not shown)
1188112222 12 Ton Capacity
USES STANDARDSHOP AIR!(90-175 PSI pressure required.)
1188330022 30 Ton Capacity1188550022 50 Ton Capacity (not shown)1188999922 100 Ton Capacity (not shown)
Model Capacity Min. Max. Hydraulic Ext. Base Size Base Size G.W.(Ton) Height Height Lifting Screw Length Width (Lbs.)
Specifications: Air-Actuated Design
1188112222 12 9-1/2” 18-1/2” 5-1/2” 3-1/2” 7-5/8” 6-1/2” 311188220022 20 9-3/4” 18-3/4” 5-1/8” 3-7/8” 8-1/4” 7-1/4” 621188330022 30 11” 18” 7” N/A 10-1/4” 8-1/4” 631188550022 50 12” 19” 7” N/A 10-7/8” 7-3/8” 1391188999922 100 12” 18-1/8” 6-1/8” N/A 12-5/8” 9-3/8” 218
1188220022 20 Ton Capacity
Heavy Duty HydraulicSERVICE JACKSHeavy Duty HydraulicSERVICE JACKS
U.S. Patented built-in by-pass deviceprotects hydraulic system from overpumping damage.
Extra wide wheels and solid stancedesigned for stability under load stress.
Metered release system allows forprecise load control.
Largest saddle in this category asallowed by ANSI standards.
FEATURES
Heavy Duty HydraulicLONG CHASSISSERVICE JACKS
Heavy Duty HydraulicLONG CHASSISSERVICE JACKS
Handle actuated release valve providesprecise metered control of loweringspeeds.
Wide stance and low center of gravityprovide optimum stability under loadstress.
Heavy gauge, steel frame helpsprevent distortion or twisting.
FEATURES
6
22110033003 Ton Capacity
2211002255 2 1/2 Ton Capacity
Convenient foot pedaldesigned for fast, noload lifts. U.S. Patent No.5,431,369.
FAST & SAFE!
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Service Jacks
2211002255 2-1/2 5-1/2” 19-1/2” 42-1/8” 5-1/8” 25-3/8” 13-1/8” 6-1/2” 732211003300 3 5-1/4” 19” 42-1/8” 4-7/8” 27-1/2” 13-3/8” 6-3/8” 87
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Long Chassis Service Jacks
2222002222 2 5” 36” 42-1/8” 5-1/2” 62-1/2” 14-3/4” 7-7/8” 1692222004400 4 5” 24” 42-1/8” 5-1/2” 53-1/8” 14-3/4” 7-1/2” 1642222005500 5 7” 27” 42-1/8” 6-5/8” 55-1/2” 16-7/8” 7-5/8” 2332222110000 10 7” 27” 42-1/8” 7-3/8” 55-1/2” 20” 12-3/4” 436
2222004400 4 Ton Capacity
(not shown)2222005500
5 Ton Capacity2222110000
10 Ton Capacity(not shown)
Convenient foot pedal designedfor fast, no load lifts. U.S.Patent No. 5,431,369.
2222002222 2 Ton Capacity
2222110011 10 Ton Capacity
7
Handle actuated release valve providesmetered control at any desired
lowering speed.
High speed Air Turbo Motor U.S. PatentNo. 5,341,723 is equipped to raise the
load to the desired height efficiently,effortlessly, and safely.
FEATURES
Handle actuated release valve providesmetered control at any desired
lowering speed.
High speed Air Turbo Motor U.S. PatentNo. 5,341,723 is equipped to raise the
load to the desired height efficiently,effortlessly, and safely.
FEATURES
Air ActuatedSERVICE JACKSAir ActuatedSERVICE JACKS
Air ActuatedLONG CHASSISSERVICE JACKS
Air ActuatedLONG CHASSISSERVICE JACKS
22110033223 Ton Capacity
Convenient foot pedal designedfor fast, no load lifts. U.S.Patent No. 5,431,369.
FAST & SAFE!
Heavy gauge, steel frame helpsprevent distortion and twisting.
USES STANDARDSHOP AIR!(90-175 PSI pressure required.)
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Air-Actuated/Manually Operated Design
2211003322 3 5-1/4” 19” 42-1/8” 5-1/8” 30” 13-3/8” 6-3/8” 104
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Air-Actuated/Manually Operated Design
2222004411 4 5” 24” 42-1/8” 5-1/2” 53-1/8” 14-3/4” 7-1/2” 1682222005511 5 7” 27” 42-1/8” 6-5/8” 55-1/2” 16-7/8” 7-5/8” 2372222110011 10 7” 27” 42-1/8” 7-3/8” 55-1/2” 20” 12-3/4” 4412222220011 20 7-1/2” 26” 48” 6-1/8” 62-1/4” 20-3/8” 11-3/4” 550
22220044114 Ton Capacity (not shown)2222005511 5 Ton Capacity (not shown)
2222220011 20 Ton Capacity
Fingertip remote control for added safetywithout sacrificing the manual operation.
Innovative design of Magic Lift offers aquicker lift for professionalperformance.
Metered release system allows forprecise load control.
After the first pump reaches the liftingpoint, the jack continues withextraordinary lifting speed to raise theload to the desired height.
Heavy gauge construction with ruggeduniversal joint release valve forprofessional performance.
U.S. Patented built-in by-pass deviceprotects hydraulic system from overpumping damage.
FEATURES
Innovative design of Magic Lift offers aquicker lift for professionalperformance.
Metered release system allows forprecise load control.
After the first pump reaches the liftingpoint, the jack continues withextraordinary lifting speed to raise theload to the desired height.
Heavy gauge construction with ruggeduniversal joint release valve forprofessional performance.
U.S. Patented built-in by-pass deviceprotects hydraulic system from overpumping damage.
FEATURES
8
25025A & 25037 come with a one-piece handle (not shown)
22660022552 1/2 Ton Capacity
Exclusive designed breather plug eliminates air in thehydraulic system, optimizing jack performance.(Available in 25025, 26025 and 25037)
Universal joint release mechanism provides precisioncontrol of load descent in any handle position.(Available in 25025 and 25037)
™
™
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Magic Lift Service Jacks (Low Profile)
2255002255 2-1/2 3-3/4” 20” 49-7/8” 5-1/2” 29-3/4” 13-1/4” 6-1/4” 952255002255AA 2-1/2 3-3/4” 20” 49-7/8” 5-1/2” 29-3/4” 13-1/4” 6-1/4” 952255003377 3 4” 23” 49-7/8” 6-1/4” 31-7/8” 15-3/8” 7-3/8” 143
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Magic Lift Swivel Handle Service Jack
2266002255 2-1/2 3-3/4” 20” 49-7/8” 5-1/2” 31” 13-3/4” 6-1/4” 105
Heavy Duty Low ProfileMAGIC LIFT SERVICE JACKSHeavy Duty Low ProfileMAGIC LIFT SERVICE JACKS
Heavy Duty HydraulicMAGIC LIFT SWIVEL
HANDLE SERVICE JACK
Heavy Duty HydraulicMAGIC LIFT SWIVEL
HANDLE SERVICE JACK
Handle rotated 120˚ toallow for pumping in tightlifting areas
22550022552 1/2 Ton Capacity
Innovative design of Magic Lift offers a quicker lift for professional
performance.
FEATURES
9
Extraordinary lifting speed withthe One Stroke Magic Lift U.S. Patent No. 5,755,099
FAST & SAFE!
Heavy gauge, steel frame helps preventdistortion and twisting.
22550055775 Ton Capacity
22550055885 Ton Capacity
™
22550033003 Ton Capacity
2255004488 4 Ton Capacity(not shown)225511007710 Ton Capacity(not shown)225511008810 Ton Capacity(not shown)
The handle connection is specially reinforcedto be as firm as the one-piece handle
™
™
Heavy Duty HydraulicMAGIC LIFT SERVICE JACKHeavy Duty HydraulicMAGIC LIFT SERVICE JACK
Magic LiftLONG CHASSISSERVICE JACKS
Magic LiftLONG CHASSISSERVICE JACKS
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Magic Lift Service Jack
2255003300 3 5-3/4” 20” 42-1/8” 5-1/2” 27-3/4” 13-3/8” 6-3/4” 91
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Magic Lift Long Chassis Service Jacks
2255004488 4 5” 24” 49-1/2” 5-1/2” 53-1/8” 14-3/4” 7-1/2” 1672255005577 5 6-1/2” 22-1/4” 40-5/8” 6-1/2” 52-5/8” 16-7/8” 11” 1982255005588 5 7” 27” 49-1/2” 6-5/8” 55-1/2” 16-7/8” 7-5/8” 2592255110077 10 6-7/8” 27” 40-5/8” 6-1/2” 51-1/2” 18-3/8” 9-5/8” 3042255110088 10 7” 27” 49-1/2” 7-3/8” 55-1/4” 20” 12-3/4” 436
FEATURES
FEATURES
10
Heavy Duty HydraulicALUMINUM RACING JACK
Heavy Duty HydraulicALUMINUM RACING JACK
Heavy Duty HydraulicMOTORCYCLE/ATV JACK
Heavy Duty HydraulicMOTORCYCLE/ATV JACK
Safety lock mechanism for supporting purpose
Foot pedal operated power unit
Tie down strap
Rubber padded lifting platformprevents scratching and protects your machine
Non-slip foot pedal allows effortlesslifting of load
3 1/2 inch low pickup height for easyaccess to low profile performance cars
All aluminum structure
48 inch, aluminum handle for strengthwhen pumping
Side frame handles allow for easy lift and carry
22660022002 Ton Capacity
4499115544 3/4 Ton Capacity
Model Capacity Minimum Maximum Base Size Base Size G.W.(Ton) Height Height Length Width (Lbs.)
Specifications: Hydraulic Motorcycle Lift
4499115544 3/4 4-1/2” 16-1/2” 34-7/8” 33-1/2” 92
Model Capacity Min. Max. Handle Saddle Jack Size Jack Size Jack Size G.W.(Ton) Height Height Length Diameter Length Width Height (Lbs.)
Specifications: Ultra-Light Racing Jack
2266002200 2 3-1/2” 18-1/2” 48” 4-7/8” 27-3/4” 12-1/8” 6-1/4” 45
Heavy Duty HydraulicFORK LIFT JACKS & STANDS
Heavy Duty HydraulicFORK LIFT JACKS & STANDS
2288004455 4 Ton Capacity (not shown) 22880044774 Ton Capacity with Air
A compact, yet powerful Air Turbo Motor U.S. PatentNo. 5,341,723 is equipped to raise the load to the
desired height efficiently, effortlessly, and safely!
TURBO MOTOR
Massive side frames add strength.
Universal, serrated saddlegrips load positively.
1133112200 6 Ton Capacity1133220000 10 Ton Capacity(not show)
33220077557 ton capacity
Heavy Duty HydraulicTOE JACKSHeavy Duty HydraulicTOE JACKS
Model Capacity Min. Max. Handle Jack Size G.W. P.S.I.(Ton) Height Height Length (L x W) (Lbs.) Reg.
Specifications: Forklift Jacks
2288004455 4 2-1/8” 17-1/8” 29-1/2” 29-3/4” x 10” 91 N/A2288004477 4 2-1/8” 17-1/8” 29-1/2” 29-3/4” x 10” 96 90-175
Model Capacity Min. Max. Saddle Base Size G.W.(Ton) Height Height Size (L x W) (Lbs.)
Specifications: Pin Style Jack Stands
3322007755 7 9-1/2” 14-1/4” 3” x 2-3/8” 8-3/4” x 8-3/4” 24
Model Capacity Min. Toe Max. Toe Min. Head Max. Head Hydraulic Base Size Base Size G.W.(Ton) Height Height Ht. Ht. Lifting Length Width (Lbs.)
Specifications: Toe Design
1133112200 6 7/8” 6” 10-1/2” 15-5/8” 5-1/8” 11” 7-1/2” 551133220000 10 1-1/8” 6-1/4” 11” 16-1/8” 5-1/8” 11-5/8” 9” 84
FEATURES
FEATURES
11
Dual lift points for various liftingapplications.
The lower point is for forklift truck liftsand the higher point is for most farm
equipment lifts.
Precision control of lifting and loweringfunctions.
Heat treated and chromed medium-carbon steel cylinder.
Chrome plated ram guarantees longer seal life and optimum performance.
Hydraulic system is protected frominternal damage by a patented by-pass
mechanism.
Heavy Duty HydraulicFLOOR STYLETRANSMISSION JACKS
The adjustable head can be tiltedforward, backward and side to side foroptimum alignment of transmissionbolt patterns and pins.
Four wheel casters allow easy movement,positioning of transmission jack.
Rugged steel wheels and full swivelball bearing casters.
User friendly 360˚ rotating pumpingsocket for the maximum in directionaloperation.
Hydraulic system is protected frominternal damage by a patented by-passmechanism.
Load-restraining chain is vital forraising and lowering safety.
FEATURES
12
Heavy Duty HydraulicFLOOR STYLETRANSMISSION JACKS
4411110000 1/2 Ton Capacity 4422000000
1 Ton Capacity
4433000000 1 1/2 Ton Capacity
Model Capacity Min. Max. Handle Saddle Exp. Saddle Jack Size G.W.(Ton) Height Height Length Base Area (L x W) (Lbs.)
Specifications: Floor Style Conventional Design
4411110000 1/2 8-1/2” 24-3/4” 22-1/2” 12-5/8” x 7-7/8” 17” x 9-3/8” 31-1/8” x 15” 1064422000000 1 7-7/8” 33-1/2” 22-1/2” 14-1/4” x 8” 17” x 15-3/4” 39-3/8” x 19-1/8” 1984433000000 1- 1/2 7-7/8” 37-1/4” 29-1/2” 15-1/2” x 13-1/4” 24-7/8” x 19” 46-3/4” x 25-5/8” 377
Chrome-plated rams maximize its high reachoperated by a user-friendly foot pedal.(41000, 41001, 42001 and 42003 only)
Adjustable ratchet style saddle(41000 & 41001 only)
A unique handy release pedal providessafety in lowering the load.
Extra-wide base lowers center ofgravity and promotes stability.
Rugged steel wheels and full swivelball bearing casters.
FEATURES
13
4400770000700 Lbs. Capacity
44110000111/2 Ton Capacity
44110000001/2 Ton Capacity
44220000331 Ton Capacity
4422000011 1 Ton Capacity
A compact, yet powerful Air Turbo MotorU.S. Patent No. 5,341,723 is equipped to
raise the load to the desired heightefficiently, effortlessly, and safely!
TURBO MOTOR
Adjustable ratchet style saddle
Single StageModel
Single StageModel
Heavy Duty HydraulicTELESCOPICTRANSMISSION JACKS
Air ActuatedTELESCOPIC TRANSMISSIONJACKS
Air Actuated TELESCOPIC TRANSMISSIONJACKS
Heavy Duty HydraulicTELESCOPICTRANSMISSION JACKS
Model Capacity Min. Max. Saddle Exp. Saddle Exp. Saddle Jack Size G.W.(Ton) Height Height Base Area Min. Area Max. (L x W) (Lbs.)
Specifications: Telescopic Transmission Jacks
4400770000 700 Lbs. 57-1/4” 76-3/8” 9-7/8” x 9-7/8” 9-7/8” x 9-7/8” 18-7/8” x 18-7/8” 36-1/8” x 32-5/8” 1364411000000 1/2 37-7/8” 77-5/8” 8-7/8” x 7-1/8” 11-1/2” x 11-1/2” 21” x 21” 34-1/8” x 36-1/8” 1804422000033 1 48-5/8” 77-3/8” 15-1/2” x 12-5/8” 15-1/2” x 12-5/8” 24-1/2” x 18-7/8” 42-1/2” x 39-1/2” 306
Model Capacity Min. Max. Saddle Exp. Saddle Exp. Saddle Jack Size G.W. P.S.I.(Ton) Height Height Base Area Min. Area Max. (L x W) (Lbs.) Req.
Specifications: Telescopic Transmission Jacks w/Air
4411000011 1/2 37-7/8” 77-5/8” 8-7/8” x 7-1/8” 11-1/2” x 11-1/2” 21” x 21” 34-1/8” x 36-1/8” 196 90-1754422000011 1 48-5/8” 77-3/8” 15-1/2” x 12-5/8” 15-1/2” x 12-5/8” 24-1/2” x 18-7/8” 42-1/2” x 39-1/2” 317 90-175
Single StageModel
Heavy Duty Hydraulic/Air ActuatedSINGLE STAGE TRUCK JACKS
A choice of three handle angles:1. 90 degrees— for space saving storage.2. 45 degrees—for easy carrying movement.3. 0 degrees—for access to lifting point.
Large steel wheels for easy positioningand smooth motion.
Sturdy one piece handle assembly isstandard on all Omega Truck Jacks
Chrome plated rams
Heat-treated extension screw allowslow pick-up height adjustment andmaximum lift height.
U.S. Patented built-in by-pass deviceprotects hydraulic system from overpumping damage.
FEATURES
14
Heavy Duty Hydraulic/Air ActuatedSINGLE STAGE TRUCK JACKS
USES STANDARD SHOP AIR(90-175 PSI pressure required.)
User friendly, self-returning spring minimizesoperators effort, greatly reducing fatigue.
Inline air filter traps contaminates and protectsair motor for longer life.
Single Stage Truck Jack Features
Effortlessly raises thesaddle quickly, thenpower lifts to desired height.
FAST & SAFE!
2233222211 22 Ton Capacity
223333001130 Ton Capacity
without extension screw
223355001150 Ton Capacity without extension screw
2233999911 100 Ton Capacity without extension screw(not shown)
Model Capacity Min. Max. Extension Handle Jack Size G.W.(Ton) Height Height Screw Length (L x W) (Lbs.)
Specifications: Truck Design
2233222211 22 9-7/8” 20-1/4” 4” 48-3/4” 22-7/8” x 12-1/2” 962233330011 30 11” 18” N/A 48-3/4” 22-7/8” x 12-1/2” 1222233550011 50 12” 19” N/A 48-3/4” 22-7/8” x 13-3/4” 1742233999911 100 12” 18-1/8” N/A 48-3/4” 26” x 15-3/4” 250
1” & 2-1/2” AdaptersStandard on 23221
ADAPTERS INCLUDED!
Single RamModels
Compact, low profile design formaximum access, which fits easily and
safely between wheels of tandemaxle vehicle.
Handle-top metered control releasevalve for easy height adjustment,
safely away from load.
Large steel wheels for easy positioningand smooth motion.
Sturdy one piece handle assembly isstandard on all Omega Truck Jacks
FEATURES
15
2233440011 40 Ton Capacity (on first ram)20 Ton Capacity(on second ram)
Double RamLong Chassis
USES STANDARDSHOP AIR!(90-175 PSI pressure required.)
Fingertip remote controlfor added safety.
223322227735 Ton Capacity (on first ram)22 Ton Capacity (on second ram)
Double RamModel
Heavy Duty Hydraulic/Air ActuatedDUAL STAGE TRUCK JACKSHeavy Duty Hydraulic/Air ActuatedDUAL STAGE TRUCK JACKS
Model Capacity Min. Max. Extension Handle Jack Size G.W.(Ton) Height Height Screw Length (L x W) (Lbs.)
Specifications: Truck Design
2233222277 35/22 8” 19-1/2” 3-1/8” 48-3/4” 21-5/8” x 13-7/8” 982233440011 40/20 7-1/8” 20-7/8” N/A 51-1/8” 78-3/4” x 6-1/4” 129
Ideal for removing and installing truckbrake drums
Works on 15” and 16-1/2” drums
Detachable handle for convenient storage
FEATURES
Hydraulic system actuated to providesmooth, positive power for theremoval and installation of single,tandem and duplex tires and wheels.
Lift arms can be adjusted to handledifferent wheel combinations
FEATURES
16
Heavy Duty BRAKE DRUM HANDLER
Heavy Duty BRAKE DRUM HANDLER
Model Product Size Low Lift High Lift Wheel G.W.(L x W x H) Height Height Diameter (Lbs.)
Specifications: Break Drum Handler
4466000000 61-1/2” x 19-3/4”x 17-3/4” 10-1/4” 15-1/4” 8” 57
44770055333/4 Ton Capacity
44770055003/4 Ton Capacity
Heavy Duty WHEEL DOLLIESHeavy Duty WHEEL DOLLIES
Model Capacity Lifting Lifting Arm Tilt Product Size G.W.(Ton) Range Dimension Range (L x W x H) (Lbs.)
Specifications: Wheel Dolly
4477005500 3/4 3” – 9” 27-1/2” x 26” -2.5 - 5.5 42-7/8” x 38-1/2” x 34-5/8” 1984477005533 3/4 2-1/4” x 11” 25-7/8” x 25-1/4” -2.5 - 10 43-1/2” x 43” x 34-7/8” 193
4466000000 Brake Drum Handler
Heavy DutyJACK STANDS “RATCHET STYLE”Heavy DutyJACK STANDS “RATCHET STYLE”
Counter-weighted pawl serves as asafe, secure locking device to prevent
the load from accidentally disengaging.
Sturdy, welded steel construction forsuperior safety and strength.
One piece, multi-position ductileratchet bar provides super strength
and durability, and quick adjustmentmechanism that securely locks into
desired location.
FEATURES
FEATURESSturdy, welded steel construction for
superior safety and strength.
Heavy gauge, steel frame helpsprevent distortion or twisting
17
332211007710 Ton Capacity
332211005510 Ton Capacity(not shown)
33220077557 Ton Capacity
332222225522 Ton Capacity
SOLD AND TO BE USEDONLY IN PAIRS
SOLD AND TO BE USEDONLY IN PAIRS
33220033553 Ton Capacity
33220066556 Ton Capacity(not shown)
332211225512 Ton Capacity(not shown)
Heavy DutyJACK STANDS “PIN STYLE”
Heavy DutyJACK STANDS “PIN STYLE”
Model Capacity Min. Max. Saddle Base Size G.W.(Ton) Height Height Size (L x W) (Lbs.)
Specifications: Ratchet Style Jack Stands
3322003355 3 11-1/2” 17” 3-1/2” x 1” 6-3/4” x 7-3/4” 233322006655 6 15-3/8” 24-1/4” 4-1/4” x 1-1/4” 9-1/4” x 10-5/8” 323322112255 12 17-1/2” 27-1/2” 4-5/8” x 1-1/2” 12” x 10-3/4” 81
Model Capacity Min. Max. Saddle Base Size G.W.(Ton) Height Height Size (L x W) (Lbs.)
Specifications: Pin Style Jack Stands
3322007755 7 9-3/8” 14-1/8” 3-1/2” x 2-3/8” 8-3/4” x 8-3/4” 233322110055 10 18-5/8” 30-1/2” 3-1/8” x 5” 16” x 16” 883322110077 10 28” 47” 3-3/8” x 5” 16” x 16” 1203322222255 22 12-1/8” 19-7/8” 3-1/8” x 2-3/4” 9-3/4” x 9-3/4” 68
18
Fast and safe technology forprofessional mechanics.
Heavy duty welded construction withrugged tubular steel.
Ideal to support the exhaust system,shock absorber and other vehiclecomponents during an under vehiclerepair. They are not designed tosupport the vehicle.
FEATURES
Smooth, long stroke hydraulic actuator
Adjustable strut shaft clasp securesthe strut during operation
Angle rotatable spring clasp bracketfits most models and sizes
Sliding ram bracket provides multipleheight adjustment
Optional leg assembly for easymaneuverability
FEATURES
3311550011 3/4 Ton Capacity
3311550000 3/4 Ton Capacity
3333002200 2 Ton CapacityFoot pedal
allows easyloadmovement.
90001 Roll aroundleg assembly(available separately)
Angle rotatable springclasp bracket fits mostmodels and sizes.
9900000000Strut SpringCompressor
Heavy Duty HydraulicSPRING
COMPRESSOR
Heavy Duty HydraulicSPRING
COMPRESSOR
Heavy DutyAUXILIARY AND TRIPOD STANDSHeavy DutyAUXILIARY AND TRIPOD STANDS
Model Capacity Min. Max. Saddle Base Size G.W.(Ton) Height Height Size (L x W) (Lbs.)
Specifications: Auxiliary Stands
3311550000 3/4 53-5/8” 79-1/8” 5-1/4” x 1-5/8” 12” Dia. 323311550011 3/4 53-3/8” 79” 5-1/4” x 1-5/8” 12” Dia. 383333002200 2 67” 76” 5-1/4” x 1-5/8” 24” x 24” x 24” 45
Model Min. Max. Operating Base Size G.W.Stroke Stroke Force (Lbs.) (L x W) (Lbs.)
Specifications: Hydraulic Strut Spring Compressor
9900000000 4-1/4” 14-1/4” 119 12-1/4” x 11-7/8” x 52-5/8” 102
Portable Heavy Duty Hydraulic
4 & 10 TON BODYREPAIR KITS
Portable Heavy Duty Hydraulic
4 & 10 TON BODYREPAIR KITS
55000044004 Ton Capacity
Model Capacity Description Model Capacity Description50040 4 Ton 50100 10 Ton
Attachments: Body Repair Kits
443311--33--44661144--220022 19-1/2” Extension Tube 443355--33--44661155--110011 27” Extension Tube443311--33--44661133--220000 16-1/2” Extension Tube 443355--33--44661144--220022 18” Extension Tube443311--33--44661122--220088 8-1/2” Extension Tube 443355--33--44661133--110077 10” Extension Tube443311--33--44661111--220066 6-1/8” Extension Tube 443355--33--44661111--110033 4” Extension Tube443311--33--44661155--220044 3” Extension Tube443311--44--44440000--110088 Male Connector 443355--44--44440000--110066 Male Connector443311--66--44664400--330022 Wedge Head 443300--66--44664400--440066 Wedge Head443311--66--44666600--440099 Serrated Saddle 443300--66--44666600--440022 Serrated Saddle443311--22--44880000--110022 Flat Base 443300--66--44880011--220022 Flat Base443344--66--44662200--110055 Ram Toe 443300--66--44662200--110077 Ram Toe443344--66--44663300--220099 Plunger Toe 443300--66--44663300--550044 Plunger Toe443311--33--44770000--330066 Rubber Head 443300--44--44770000--220044 Rubber Head443311--66--44665500--550077 Combination Head(90˚) 443300--66--44665500--550000 Combination Head (90˚)443344--44--44110000--110077 Spreader 443344--44--44110000--110077 Spreader443344--66--33331133--110011 Dust Cover, Hose 443344--66--33331133--110011 Dust Cover, Hose443344--66--33331122--110099 Dust Cover, Ram 443344--66--33331122--110099 Dust Cover, Ram443344--33--33330011--110066 Hose Coupler 443344--33--33330011--110066 Hose Coupler443344--44--33220011--110088 Ram Coupler 443344--44--33220011--110088 Ram Coupler443344--11--22000000--110055 Ram 443355--11--22000000--110022 Ram443344--44--33000000--110088 Hose 443344--44--33000000--110088 Hose443344--00--11000000--110044 Pump 443355--00--11000000--110011 Pump443344--66--77110077--110066 Case 443355--66--77110022--110055 Case
WWhheenn eexxtteennssiioonn ttuubbeess aanndd//oorr ooffffsseett aattttaacchhmmeennttss aarree uusseedd,, tthhee ccaappaacciittyy iiss rreedduucceedd 19
Sets are portable for easy usage inshop or on the road.
Designed for applications of pushing,spreading and pressing of vehicle body
panels as well as various componentparts and assemblies.
A variety of attachments are included.
Pumps are rated from 8,000 to 10,000 PSI.
Custom fitted, rugged blow-moldedstorage case. 10 ton set has wheelsfor easy movement. U.S. Patent No.
5,520,400
A must for body collision repair use.
FEATURES
550011000010 Ton Capacity
Model Ram Ram G.W.Min Ht. Max Ht. (Lbs.)
Specifications: Body Repair Kits
5500004400 11” 15-3/4” 475500110000 13-5/8” 19-3/4” 92
20
User friendly foot-actuated design for easycontrol of moving fluid at tremendous rate.Uses 3/8” NPTF fluid coupler.
Provides up to 10,000 PSI with standardshop air supply of 90-175 PSI.
Made of durable light weightcorrosion-free aluminum.
Built-in pressure by-pass systemprotects overload operation.
Efficiently operates any single-acting ramsup to 55 ton capacity in many industrialand construction applications.
FEATURES
Develops 15 tons of thrust at 10,000 P.S.I.
Capable of bending highpressure/temperature tubing as well asstandard hydraulic, gas, steel,aluminum and brass from 1/2” up to3” with included attachments.
Heavy steel welded construction.
Complete with 7 attachments for awide variety of pipe diameters.
FEATURES
2222990033 91.5 in3 Reservoir
2222990055122 in3 Reservoir
(not shown)
6666115500Pipe Bender
1/2”3/4” 1” 1 1/4”
1 1/2”
2”
3”
Heavy Duty HydraulicPIPE BENDERHeavy Duty HydraulicPIPE BENDER
Portable Heavy Duty HydraulicAIR ACTUATED FOOT PUMPSPortable Heavy Duty HydraulicAIR ACTUATED FOOT PUMPS
Model Usable Oil Pressure Air Pressure Output Flow Rate G.W.Capacity (in3) Rating (psi) Range (psi) (in3/min.) (Lbs.)
Specifications: Foot Pumps
2222990033 91.5 10,000 90-175 67 6.71 202222990055 122 10,000 90-175 61.02 9.15 22
No load Load
Model Cylinder Stroke Max Working Product Size G.W.Capacity Range Pressure (L x W x H) (Lbs.)
Specifications: Pipe Bender
6666115500 15 Ton 9-7/8” 10,000 P.S.I. 30-3/8” x 28-1/2” x 39-3/8” 147
665511223312 Ton Bench Presswith Hand Pump
660011220012 Ton Shop Presswith Bottle Jack660022000020 Ton Shop Press with Bottle Jack (not shown)
660011223312 Ton Shop Presswith Hand Pump (not shown)
6600225533 25 Ton Shop Presswith Hand Pump
555511225512 Ton Hydraulic AssemblyModels 60123 and 65123
555522555525 Ton Hydraulic Assemblyfor Model 60253
5555110011Optional Air-Actuated 10,000 PSI Hand Pump
Heavy Duty HydraulicSHOP PRESSES
WITH BOTTLE JACKS
Heavy Duty HydraulicSHOP PRESSES
WITH BOTTLE JACKS
Heavy Duty HydraulicBENCH, SHOP PRESSES& HAND PUMPS
Heavy Duty HydraulicBENCH, SHOP PRESSES& HAND PUMPS
Model Capacity Bottle Jack Min Working Max Working Bed Press Size G.W.(Ton) Stroke Space Space Position (W x D x H) (Lbs.)
Specifications: Presses
6600112200 12 9-1/8” 2-5/8” 34-3/8” 8 22-3/4” x 18-1/2” x 59” 1296600220000 20 9-1/8” 2-1/2” 34-1/8” 8 28” x 28” x 64-1/2” 242
Model Capacity Ram Working Working Bed Press Size G.W.(Ton) Stroke Space Min. Space Max. Positions (W x D x H) (Lbs.)
Specifications: Presses
6600112233 12 6” 2-1/2” 34-1/4” 8 28” x 28” x 59” 2086600225533 25 6” 2-1/2” 34-1/4” 8 28” x 28” x 59” 2636655112233 12 6” 3-1/4” 16-7/8” 4 21-1/4” x 16-1/8” x 31-1/2” 148 21
Ideal for the removal or installation ofgears, universal joints, pulleys, wristpins, and other various press jobs.
Heavy steel welded construction.
Excellent for bending, bonding, orstraightening applications.
Multi-position bed for work heightadjustment
FEATURES
33112255001250 Lbs.Capacity
22
44449944004 Ton Capacity (not shown)44449988008 Ton Capacity44449988118 Ton Capacity Air-Actuated(not shown)
Long rams have internal load-limiting deviceto protect crane and user from overload.
3300775500750 Lbs. Capacity
Model Capacity Base Base Width Base Width G.W.(Ton) Length (Front) (Rear) (Lbs.)
Specifications: Engine Cranes
4444001100 1 69-1/2” 21-1/2” x 48-1/4” 31-1/2” 2514444002200 2 69-1/2” – 91-1/2” 32-1/4” x 39-3/8” 27-1/4” x 50-1/2” 264
Model Capacity Base Size Overall Head Plate Head Plate Wheel Handle G.W.(Lbs.) (L x W) Height Thickness Diameter Length (Lbs.)
Specifications: Engine Stands
3300775500 750 31-1/2” x 31-1/2” 36-3/4” 10” x 6” 3/8” 3” 20-1/4” 553311225500 1250 33-3/8” x 33-7/8” 42-3/4” 7-1/2” x 6-1/2” x 7/8” x 10-1/2” 7/8” 3-1/2” 20-1/4” 873311225522 1250 41-3/4” x 23-5/8” 42-3/4” 7-1/2” x 6-1/2” x 7/8” x 10-1/2” 7/8” 3-1/2” 20-1/4” 923311225566 1250 41-3/4” x 23-5/8” 42-3/4” 7-1/2” x 6-1/2” x 7/8” x 10-1/2” 7/8” 3-1/2” N/A 117
Heavy Duty ENGINE STANDSHeavy Duty ENGINE STANDS
Heavy Duty HydraulicENGINE CRANES & LONG JACKS
Heavy Duty HydraulicENGINE CRANES & LONG JACKS
Model Min. Max.Height Height
Specifications: Long Rams
4444994400 19-7/8” 34-3/4”4444998800 23-5/8” 42-3/4”4444998811 23-5/8” 42-3/4”
33112255661250 Lbs. Capacity w/ Rotating Head
33112255221250 Lbs. Capacity w/ Adjustable Legs (not shown)
Heavy duty welded construction withrugged reinforced tubular steel.
4 Boom positions from 31 1/8” to 43”
Metered control release valve forlowering boom at a precisely-controlled rate of speed.
Special 8 ton hydraulic long rams areequipped with a patented built-in by-pass mechanism.
FEATURES
Constructed from heavy-gauge weldedsquare tubular steel.
Extra-long handle with rubber grip foreasy rotation and maneuvering.
Head plate locks in 8 positions androtates 360º (30750)
FEATURES
44440011001 Ton Capacity (Folding Design)44440022002 Ton Capacity (not shown)
Heavy duty worm gear allowsfor smooth and effortlessengine rotation
SMOOTH ROTATION
23
CanadaSFC Companies3615 Laird Road, Unit 18Mississauga, OntarioL5L 5Z8Tel: 905-820-3737Fax: 905-820-1166Email: [email protected]
USASFA Companies10939 N. Pomona Ave.Kansas City, MO. 64153Tel: 888-332-6419Fax: 816-891-6599Email: [email protected]
Mexico / Central & South AmericaTel: 52-834-092-89Fax: 52-834-261-86Email: [email protected]
EuropeSF Europe B.V.Hoge Bergen 10 4707 RH Roosendaal“The Netherlands”Tel: 31-165-583300Fax: 31-165-583310Email: [email protected]
SF Australia Pty Ltd15 Viewtech Place,Rowville, 3178, VictoriaAustraliaTel: 61-3-97558277 Fax: 61-3-97558219Email: [email protected]
Asia SF Asia Corporation7F., NO.618, Ruei Guang RoadNei Hu District, Taipei City 114Taiwan R.O.C.Tel: 886-2-8751-7888Fax: 886-2-8751-7999Email: [email protected]
KKaannssaass CCiittyy,, MMoo..Sales, Marketing, Engineering, and Distribution
GlobalLOCATIONS
Asia SF JapanO’s 520, ATC bldg, 2-1-10, Nanko-Kita,Suminoe-Ku, Osaka 559-0034JapanTel: +81-6-6614-9714Fax: +81-6-6614-9711Email: [email protected]
Printed in U.S.A.U.S. $8.00
Catalog JP05
©2005 SFA Companies10939 N. Pomona Avenue Kansas City, Missouri 64153Tel: 816-891-6390 Fax: 816-891-6599Email: [email protected] Web: www.omegalift.com