700 Series Rubber Seated Butterfly Valves for general use ... · 700 Series Rubber Seated Butterfly...

700G-01704G705G

Center HandleLock Lever Worm Gear PneumaticCylinder Motorized

Shaft tiltMetal ring

700 SeriesRubber Seated Butterfly Valves for general use

The 316 stainless steel (JIS SCS14) rib disc comesstandard from 50mm to 300mm. Thin profiledisc reinforced by ribs (patent pending) provideslarger Cv compared to our conventionaldesign. It also reduces weight whilemaintaining mechanical strength. A flatface disc is also available on request.

The cosine curve seat ring reduces valveoperating torque substantially and allowsthe torque to be adjusted according tothe working pressure.

Similar to a spherical body rotating inside aspherical area, the operation of the disc issmooth and unhindered. Torque is reducedand the valve life is lengthened by 300%.

The stem seal is the primary and secondary sealsystem. The backup ring functions as theself-aligning stem seal.

The long neck shape allows insulation of up to 50mm after the valve is installed. 701G: Nylon coated body is also available (50 to 300mm).Please contact us for more information.

Two valve models are available: the casted hole type (700G) and the tapped and drilled hole type (705G). They accommodate all the applicable flange standards.

Features and Benefits

700G Wafer

704G Full lugged

705G Semi lugged

Rib disc

Patented cosine curve seat ring

Much longer life with spherical design

Self-aligning stem seal through backup ring

Long bonnet

Two aligning methods (350 to 600mm)

700G/704G/705G－③ 2015.06.01 239

700G-01704G705G

Center HandleLock Lever Worm Gear PneumaticCylinder Motorized

Shaft tiltMetal ring

700 SeriesRubber Seated Butterfly Valves for general use

The 316 stainless steel (JIS SCS14) rib disc comesstandard from 50mm to 300mm. Thin profiledisc reinforced by ribs (patent pending) provideslarger Cv compared to our conventionaldesign. It also reduces weight whilemaintaining mechanical strength. A flatface disc is also available on request.

The cosine curve seat ring reduces valveoperating torque substantially and allowsthe torque to be adjusted according tothe working pressure.

Similar to a spherical body rotating inside aspherical area, the operation of the disc issmooth and unhindered. Torque is reducedand the valve life is lengthened by 300%.

The stem seal is the primary and secondary sealsystem. The backup ring functions as theself-aligning stem seal.

The long neck shape allows insulation of up to 50mm after the valve is installed. 701G: Nylon coated body is also available (50 to 300mm).Please contact us for more information.

Two valve models are available: the casted hole type (700G) and the tapped and drilled hole type (705G). They accommodate all the applicable flange standards.

Features and Benefits

700G Wafer

704G Full lugged

705G Semi lugged

Rib disc

Patented cosine curve seat ring

Much longer life with spherical design

Self-aligning stem seal through backup ring

Long bonnet

Two aligning methods (350 to 600mm)

700G/704G/705G－③ 2015.06.01 700G-02704G705G

Standard Specifications

Seat ring material table

Discs and seats come in various materials to meet a wide range of needs. These are the ultimate general purpose valves and they provide excellent cost performance.

※1 16bar finish is also available subject to working conditions.※2 Working temperature range varies depending on combination of disc materials and seating. Please consult us.※3 Please consult us when using NBR and EPDM seatring continuously above 60 degrees C and 70 degrees C respectively.※4 "Working temperature in continuous use" stands for the temperature continuously kept exceeding one hour.※5 Cast steel body or stainless steel body is also available.

※6 Rib disc: standard. Flat face disc: optional.※7 Heat resistant EPDM (to 150 degrees C), FPM, SEP, CR and white-NBR seats are also available. See below table.※8 Polyester powder backed finish (V-Pet #4000) for 700G size 40 to 300mm. Epoxy resin coating for 705G size 50 to 300mm.* Never use an EPDM rubber seat ring if the valve is being used foroil or for a fluid containing even a slight amount of oil.

ModelValve nominal size

Applicable flange standard

Face-to-face dimensionsMax. working pressureBody shell test (hydraulic)Seat leak test (pneumatic) ※1Working temperature range ※2,※3Working temperature incontinuous use ※4

40 to 300mmJIS 5K/10K ANSI125lb/150 lb DINNP10, NP16 BS

4504 PN10, PN16,BS 10 'E'

Ductile iron, JISFCD450

316 stainlesssteel, JIS SCS14

※6

PPS (50 to200mm)

Aluminium bronzeJIS CAC702 (50 to

600mm)

Ductile iron,JIS FCD 450

40 to 200mm40 to 300mm40 to 300mm40 to 300mm40 to 300mm

350 to 500mm

JIS 5K/10K

Cast iron, JIS FC 250

304 stainless steel, JIS SCS13316 stainless steel, JIS SCS14

Aluminium bronze JIS CAC702

Ductile iron, JIS FCD 450 with hardchrome plating

-350 to 600mm

-350 to 600mm350 to 600mm

600mmJIS 5K, ANSI125 lb/150

lb, DIN NP10,BS4504 PN10,

(excluding JIS 10K)

Standardmaterials

Actuators

Coating ※8

Body ※5

Disc

StemSeat ring ※7Lock leverWorm gearCentre handlePneumaticMotorised

700G (Wafer) 705G (Semi lugged)704G (Fully lugged)50 to 300mm

API 609 / ISO 5752 (20 series)1.0 MPa1.5 MPa1.1 MPa

NBR : -10 to 80 degrees C, *EPDM : -20 to 120 degrees C

NBR : 0 to 60 degrees C, *EPDM : 0 to 70 degrees C


※6

PPS (50 to200mm)

Aluminium bronzeJIS CAC702 (50 to

600mm)


SUS420J2 / SUS 392 J1NBR, *EPDM ※7


Epoxy primer finish (Munsell N7)

Ductile iron, JIS FCD450

JIS 5K/10K, ANSI 125lb/150lb, DINNP10, NP16, BS 4504 PN10/PN16

350 to 600mm

304 stainlesssteel, JIS SCS 13,


Aluminium bronzeJIS CAC702

Ductile iron, JISFCD 450 with

hard chrome plating

-350 to 600mm

-350 to 600mm350 to 600mm

50 to 300mmJIS 5K/10K, ANSI125lb/150lb, DIN

NP10, NP16,BS 4504 PN10,PN16, BS10 'E'

Ductile iron, JISFCD 450

316 stainlesssteel, JIS SCS

14 ※6

PPS (50 to 200mm)Aluminiumbronze JIS

CAC702 (50 to600mm)



350 to 600mmJIS 5K/10K, ANSI125lb/150lb, DINNP10, BS 4504PN10, PN16,

BS10 'E'

Cast iron, JISFC250, Ductile

iron, JIS FCD450304 stainless

steel, JIS SCS 13,316 stainless

steel, JIS SCS 14

Aluminium bronzeJIS CAC702

Ductile iron, JISFCD 450 with hard

chrome plating

-350 to 600mm

-350 to 600mm350 to 600mm

Handling, durability and longevity are the basic aspects by which valve performance can be improved. TOMOE have now developed the 700G series, a superior, pressure-proof, general purpose valve, with the addition of a wide range of features to offer improved performance and better cost efficiency.The 700G series is designed to satisfy many international flange standards for use worldwide.

General Description

The body is available in various designs such as wafer, semi-lugged and full-lugged, with various materials such as ductile iron, carbon steel, etc. The disc is also available with high-grade stainless steel, type 316, nylon coating, aluminium, bronze or PPS. The patented cosine-curve structure is adopted for the seat ring. The 700G series is superior to conventional models in all respects.

Structure

StandardEPDM－20～120

0～701.0

NBR－10～80

0～601.0

W-NBR－10～70

0～600.5

FKM－10～60

0～500.5

CR－10～80

0～601.0

SEP－10～60

0～500.5

Heat resistant EPDM－10～150

0～1300.5

MaterialWorking temperature range (degrees C)Working temperature in continuous use (degrees C)Max. working pressure (MPa)

On request

240

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-03704G705G

8-1

8-2

8-2

9-2

9-1

9-2

9-1

11

14

1

3

g41

7

13

1617

18

610-210-1

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

8-1

14

6

10-2

10-1

350mm

2

12

11

350mm to 600mm

40mm to 300mm

SCS14

700G Expanded view of components

700G（Wafer）

241

700G-03704G705G

8-1

8-2

8-2

9-2

9-1

9-2

9-1

11

14

1

3

g41

7

13

1617

18

610-210-1

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

8-1

14

6

10-2

10-1

350mm

2

12

11

350mm to 600mm

40mm to 300mm

SCS14


700G（Wafer）

700G-04704G705G

700G Parts list

■700G Parts list（40mm to 300mm）

12346

10-110-2

111214303132333435

★★★★★★

BodyDiscUpper stemLower stemBottom coverHexagon boltSpring washerSecondary ringSeat ringGasketBushingO-ringO-ringSpring pinMachine screwPlate

1111122211111121

See Remark 2.

Only 50mm to 300mm


12367

8-18-29-19-2

10-1

10-2

1111121314161718

g41

★★★★

★

★★★

BodyDiscStemBottom coverRetainer plateTaper boltO-ringHexagon nutSpring washer

Hexagon bolt

Spring washer

Secondary ringSecondary ringSeat ringO-ringGasketBallHollow boltLock nutKey

1111124222424221111111

350mm400mm to 600mm350mm400mm to 600mm350mm400mm to 600mm

Only 400mm to 600mmOnly 400mm to 600mmOnly 400mm to 600mm

No. Description RemarksQ’ty


Remark 1: The ★ indicates recommended spare parts. They are supplied as “Seat ring set” with a small hexagonal spanner to remove hollow bolt.Remark 2: When the disc material is PPS, the lower stem length of types 50mm to 100mm is different from standard.

242

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-05704G705G

SCS14

50mm to 300mm

50mm,65mm,80mm (JIS 5K)

14

6

10-2

10-1

350mm to 600mm

350mm

11

80mm

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

8-1

8-1

8-2

8-2

9-2

9-111

14

1

3

g41

7

13

1617

18

6

10-2

10-1

2

12

9-2

9-1

11

704G Expanded View of Components

704G（Full lugged）

243

700G-05704G705G

SCS14

50mm to 300mm

50mm,65mm,80mm (JIS 5K)

14

6

10-2

10-1

350mm to 600mm

350mm

11

80mm

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

8-1

8-1

8-2

8-2

9-2

9-111

14

1

3

g41

7

13

1617

18

6

10-2

10-1

2

12

9-2

9-1

11

704G Expanded View of Components


700G-06704G705G

704G Parts list


12346

10-110-2

111214303132333435

★★★★ ★★


1111122211111121

See Remark 2.


12367

8-18-29-19-2

10-1

10-2

1111121314161718

g41

★★★★

★ ★★★


Hexagon bolt

Spring washer


1111124222424221111111






244

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-07704G705G

8-1

8-2

9-2

9-2

9-1

9-1

11

14

1

3

g41

7

13

14

6

10-2

10-1

1617

18

610-210-1

8-1

8-2

2

12

11

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

50mm to 300mm

350mm to 600mm

350mm

SCS14


705G（Semi lugged）

245

700G-07704G705G

8-1

8-2

9-2

9-2

9-1

9-1

11

14

1

3

g41

7

13

14

6

10-2

10-1

1617

18

610-210-1

8-1

8-2

2

12

11

3

33

34

30

31

32

35

1

11

11

4

14

610-2

10-1

12

2

50mm to 300mm

350mm to 600mm

350mm

SCS14



700G-08704G705G

705G Parts list


12346

10-110-2

111214303132333435

★★★★ ★★


1111122211111121

See Remark 2.


1 2 3 6 7

8-18-29-19-2

10-1

10-2

11 1112 1314 16 17 18

g41

★★★★

★ ★ ★ ★


Hexagon bolt

Spring washer


1111124222424221111111






246

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-09704G705G

0 20 40 60 80 100 120 140 0 20 40 60 80 100－20

0.2MPa

0.4MPa

0.6MPa

0.8MPa

1.0MPa

0.2MPa

0.4MPa

0.6MPa

0.8MPa

1.0MPa

In case of EPDM seatring In case of NBR seatring

degree C (Temperature) degree C (Temperature)

(Pre

ssur

e)

(Pre

ssur

e)

TIGHT SHUT TIGHT SHUT

700G / 704G / 705G Actuator Selection Chart

■700G

700G / 704G / 705G Pressure-Temperature Rating

Remark※: For 400mm with the accessories below, type 4I-4 should be selected. ●Micom unit ●Servo unit ●Speed control unit ●Potentiometer

Select when any of the following items apply.①Powder or high viscosity fluid (crude oil, etc.)②Control specification (with positioner)③Emergency open valve or pipe dead end valve

Select when none of the followingheavy duty items apply.Standard

Heavy duty

Sele

ctio

n cr

iteria

50

2

40

1 1/2

65

2 1/2

80

3

100

4

125

5

150

6

200

8

250

10

300

12

350

14

400

16

450

18

500

20

600

24

ModelCate-gory

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

1T

2U

2G,2R

7E,3A

7G,7F3U,3K

4 I

4J,4L

ON-OFFControl

1T-1

2U-0 2U-1 2U-2 2U-3 2U-4 2U-5 2U-6

2R-42G-1

T35 T85 T200 T380 T750

4 I-0 4 I-1 4 I-2 4 I-2.5 4 I-3

SRJ-010 SRJ-020 SRJ-060LTKD-01

0.2kW/MGH-3

LTKD-01 0.4kW

/MGH-3

LTKD-050.75kW/MGH-4

1T-2 1T-3

2G-2

4 I-4

2G-3 2G-4 2R-3

TGA-160

TGA-125 TGA-140

TGA-200

TGA-180

TGA-140TGA-125

TG-12S TG-14STG-20S

TG-10S

4 I-00

T85S T200S T380ST750S

T750S

700G（Wafer）/704G（Full lugged）/705G（Semi lugged）

Size mminch( (

※

247

700G-09704G705G

0 20 40 60 80 100 120 140 0 20 40 60 80 100－20

0.2MPa

0.4MPa

0.6MPa

0.8MPa

1.0MPa

0.2MPa

0.4MPa

0.6MPa

0.8MPa

1.0MPa

In case of EPDM seatring In case of NBR seatring

degree C (Temperature) degree C (Temperature)

(Pre

ssur

e)

(Pre

ssur

e)

TIGHT SHUT TIGHT SHUT

700G / 704G / 705G Actuator Selection Chart

■700G

700G / 704G / 705G Pressure-Temperature Rating

Remark※: For 400mm with the accessories below, type 4I-4 should be selected. ●Micom unit ●Servo unit ●Speed control unit ●Potentiometer

Select when any of the following items apply.①Powder or high viscosity fluid (crude oil, etc.)②Control specification (with positioner)③Emergency open valve or pipe dead end valve

Select when none of the followingheavy duty items apply.Standard

Heavy duty

Sele

ctio

n cr

iteria

50

2

40

1 1/2

65

2 1/2

80

3

100

4

125

5

150

6

200

8

250

10

300

12

350

14

400

16

450

18

500

20

600

24

ModelCate-gory

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

Standard

Heavy duty

1T

2U

2G,2R

7E,3A

7G,7F3U,3K

4 I

4J,4L

ON-OFFControl

1T-1

2U-0 2U-1 2U-2 2U-3 2U-4 2U-5 2U-6

2R-42G-1

T35 T85 T200 T380 T750

4 I-0 4 I-1 4 I-2 4 I-2.5 4 I-3

SRJ-010 SRJ-020 SRJ-060LTKD-01

0.2kW/MGH-3

LTKD-01 0.4kW

/MGH-3

LTKD-050.75kW/MGH-4

1T-2 1T-3

2G-2

4 I-4

2G-3 2G-4 2R-3

TGA-160

TGA-125 TGA-140

TGA-200

TGA-180

TGA-140TGA-125

TG-12S TG-14STG-20S

TG-10S

4 I-00

T85S T200S T380ST750S

T750S


Size mminch( (

※

700G-10704G705G

40 to 300mm 350 to 600mm

□D1

φDφ

d

H1（

App

rox.）

H2

H3

L

φd2

C1

φDφd

□D1□S1

L

H1（

App

rox.）

H2

H3

φd2

700G Bare shaft (01: 40mm to 300mm, 02: 350mm to 600mm)

■Dimensions

700G（Wafer）

45

56

69

84

104

130

153.5

199

253

302

337

394

441

492

584

80

90

115

126

146

181

211

256

322

367

410

469

525

580

682

8

8

8

10

12

14

14

18

24

24

－－－－－

70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

35

43

46

46

52

56

56

60

68

78

78

102

114

127

154

61

68

79

86

103

118

135

177

215

253

276

338

368

403

458

132

138

151

156

167

191

202

227

280

312

348

383

413

453

528

21.5

21.5

21.5

22.5

22.5

27.5

27.5

30

35

35

48

54

65

79

79

Dimension (mm) Approx.Mass(kg)φd

10

10

10

12

14

16

18

22

28

32

32

40

46

50

55

φd2φD

70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

□D1□S1 φC1 L H1 H2 H3

Nominal size

mm inch

40

50

65

80

100

125

150

200

250

300

350

400

450

500

600

1 1/2

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

1.5

1.8

2.5

2.6

3.4

5.4

7

10.4

18

25

42

64

87

114

191

248

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-11704G705G

50 to 300mm 350 to 600mm

L

H3

H2

H1（

App

rox.）

φd2

□D1

φD

φd

□D1□S1

TOMOE

φD

φd

L

H1（

App

rox.）

H2

H3

φd2

φC1

704G Bare shaft（01： 50mm to 300mm, 02： 350mm to 600mm）

704G（Full-lugged）

In Case JIS10K: ＊In Case JIS10K or DIN PN10: ※

＊

＊

＊

※

※

■Dimensions

56

69

84

84

104

130

153.5

199

253

302

337

394

441

492

584

584

90

115

126

190

223

250

276

334

402483472505533

579

526634696

820

795

43

46

46

46

52

56

56

60

68

78

78

102

114

127

154

154

85

94

109

109

117

143

164

176

215

253

276

338

368

403

458

458

138

151

156

156

167

191

202

227

280

312

348

383

413

453

528

528

21.5

21.5

22.5

22.5

22.5

27.5

27.5

30

35

35

48

54

65

79

79

79


10

10

12

12

14

16

18

22

28

32

32

40

46

50

55

55

φd2φD70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

165

φC1 L H1 H2 H3

Nominal size

mm inch50

65

80

80

100

125

150

200

250

300

350

400

450

500

600

600

2

2 1/2

3

3

4

5

6

8

10

12

14

16

18

20

24

24

2.5

3.5

4

4.8

6.7

8.8

10.4

16.3

27

39

66

107

128

170

275

269

8

8

10

10

12

14

14

18

24

24

－－－－－－

70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

165

□D1□S1


249

700G-11704G705G

50 to 300mm 350 to 600mm

L

H3

H2

H1（

App

rox.）

φd2

□D1

φD

φd

□D1□S1

TOMOE

φD

φd

L

H1（

App

rox.）

H2

H3

φd2

φC1


704G（Full-lugged）

In Case JIS10K: ＊In Case JIS10K or DIN PN10: ※

＊

＊

＊

※

※

■Dimensions

56

69

84

84

104

130

153.5

199

253

302

337

394

441

492

584

584

90

115

126

190

223

250

276

334

402483472505533

579

526634696

820

795

43

46

46

46

52

56

56

60

68

78

78

102

114

127

154

154

85

94

109

109

117

143

164

176

215

253

276

338

368

403

458

458

138

151

156

156

167

191

202

227

280

312

348

383

413

453

528

528

21.5

21.5

22.5

22.5

22.5

27.5

27.5

30

35

35

48

54

65

79

79

79


10

10

12

12

14

16

18

22

28

32

32

40

46

50

55

55

φd2φD70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

165

φC1 L H1 H2 H3

Nominal size

mm inch50

65

80

80

100

125

150

200

250

300

350

400

450

500

600

600

2

2 1/2

3

3

4

5

6

8

10

12

14

16

18

20

24

24

2.5

3.5

4

4.8

6.7

8.8

10.4

16.3

27

39

66

107

128

170

275

269

8

8

10

10

12

14

14

18

24

24

－－－－－－

70

70

70

70

70

102

102

102

102

125

140

140

140

140

165

165

□D1□S1


700G-12704G705G

50 to 300mm 350 to 600mm

□D1

φD

φd

L

H3

H2

H1（

App

rox.）

φd2

φC1

□D1 □S1

φD

φd

L

H1（

App

rox.）

H2

H3

φd2

56

69

84

104

130

153.5

199

253

302

337

394

441

492

584

90

115

126

146

181

211

256

322

367

410

469

525

580

682

43

46

46

52

56

56

60

68

78

78

102

114

127

154

85

94

109

117

143

164

186

215

253

276

338

368

403

458

138

151

156

167

191

202

227

280

312

348

383

413

453

528

21.5

21.5

22.5

22.5

22.5

27.5

30

35

35

48

54

65

79

79


10

10

12

14

16

18

22

28

32

32

40

46

50

55

φd2φD

70

70

70

70

102

102

102

102

125

140

140

140

140

165

φC1 L H1 H2 H3

Nominal size

mm inch

50

65

80

100

125

150

200

250

300

350

400

450

500

600

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

2.5

3.5

4

5

8

11

15

24

31

47

72

96

127

191


■Dimensions

705G（Semi-lugged）

8

8

10

12

14

14

18

24

24

－－－－－

70

70

70

70

102

102

102

102

125

140

140

140

140

165

□D1□S1

250

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-13704G705G

W

φD

L

φd

H3

H2

H1

1 T L S（standard） 1 T L R 1 T R S 1 T R R

1 T X S 1 T X R 1 T V S 1 T V R

■1T Installation direction

Lock lever type 700G-1T（40mm to 200mm）

■700G-1T

Lever typeDimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 W

Nominal sizemm inch

40506580

100125150200

1 1/22

2 1/234568

45566984

104130153.5199

8090

115126146181211256

3543464652565660

61687986

103118135177

132138151156167191202227

6666666666929297

200200200200200300300350

1T-11T-11T-11T-11T-11T-21T-21T-3

2.12.43.13.246.78.3

12.1

700G（Wafer）

251

700G-13704G705G

W

φD

L

φd

H3

H2

H1


1 T X S 1 T X R 1 T V S 1 T V R



■700G-1T

Lever typeDimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 W

Nominal sizemm inch

40506580

100125150200

1 1/22

2 1/234568

45566984

104130153.5199

8090

115126146181211256

3543464652565660

61687986

103118135177

132138151156167191202227

6666666666929297

200200200200200300300350

1T-11T-11T-11T-11T-11T-21T-21T-3

2.12.43.13.246.78.3

12.1

700G（Wafer）

700G-14704G705G

φD

H1

H2

H3

L

EK

φd

φW

F

Worm gear type 700G-2U（40mm to 600mm）

■700G-2U

2 U A（standard） 2 U A R 2 U B 2 U B R

■2U Installation direction

45566984

104130153.5199253302337394441492584

8090

115126146181211256322367410469525580682

3543464652565660687878

102114127154

61687986

103118135177215253276338368403458

132138151156167191202227280312348383413453528

29.529.529.529.529.534.534.541.541.5484850505061

36363636364444676787.587.5909090

113

160160160160160173.5173.5198198222.5222.5266266266352

4646464646535375759090

105105105140

100100100100100160160200200200280280280280400

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 E K F W

Gear typeNominal sizemm inch

40506580

100125150200250300350400450500600

1 1/22

2 1/23456810121416182024

2U-02U-02U-02U-12U-12U-22U-22U-32U-32U-42U-42U-52U-52U-52U-6

3.84.14.84.95.79.6

11.21826395880

103130222

252

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-15704G705G

φD

L

φd

φW

H1

H2

H3

Center handle type 700G-2G（40mm to 300mm） / 700G-2R（350mm to 600mm）

Dimension (mm) Approx.Mass(kg)

Center handletypeφd φD L H1 H2 H3 W

Nominal sizemm inch

40506580

100125150200250300350400450500600

1 1/22

2 1/23456810121416182024

45566984

104130153.5199253302337394441492584

8090

115126146181211256322367410469525580682

3543464652565660687878

102114127154

61687986

103118135177215253276338368403458

132138151156167191202227280312348383413453528

136136136136136133133151151161409409409409498

100100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

4.44.75.45.56.39.2

10.817.525.132.17597

121148244

■700G-2G/2R

700G（Wafer）

253

700G-15704G705G

φD

L

φd

φW

H1

H2

H3




Nominal sizemm inch

40506580

100125150200250300350400450500600

1 1/22

2 1/234568

10121416182024

45566984

104130153.5199253302337394441492584

8090

115126146181211256322367410469525580682

3543464652565660687878

102114127154

61687986

103118135177215253276338368403458

132138151156167191202227280312348383413453528

136136136136136133133151151161409409409409498

100100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

4.44.75.45.56.39.2

10.817.525.132.17597

121148244

■700G-2G/2R

700G（Wafer）

700G-16704G705G

L

H3

H2

H1

f1 f2A

P

φDφd

Air port side

Air port side

Double-acting pneumatic cylinder type 700G-7E（40mm to 350mm）

■Standard

■Heavy duty

■7E Installation direction

Select when any of the following items apply.①Powder or high viscosity fluid (crude oil, etc.)②Control specification (with positioner)③Emergency open valve or pipe dead end valve④Air or Gas

Select when none of the followingheavy duty items apply.

Standard

Heavy duty

Sele

ctio

n cr

iteria

45566984

104130153.5199253302337

8090

115126146181211256322367410

3543464652565660687878

61687986

103118135177215253276

132138151156167191202227280312348

125125125168168168203231231269269

228228228276276276346423423546546

575757757575799191

118118

116116116142142142176214214270270

2929294747475769698585

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 A P f1 f2

Center handletype

Nominal sizemm inch


Center handletype

Nominal sizemm inch

40506580

100125150200250300350

1 1/22

2 1/234568101214

T35T35T35T85T85T85

T200T380T380T750T750

44588

101525324974

45566984

104130153.5199253302

8090

115126146181211256322367

35434646525656606878

61687986

103118135177215253

132138151156167191202227280312

125125125168203203203231231269

228228228276346346346423423546

575757757979799191

118

116116116142176176176214214270

29292947575757696985

40506580

100125150200250300

1 1/22

2 1/2345681012

T35T35T35T85

T200T200T200T380T380T750

4458

121415253249

7 E A（standard） 7 E B

■700G-7E

254

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-17704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L

■Standard

■Heavy duty

3 A A（standard） 3 A B

■3A Installation direction

Double-acting pneumatic cylinder type 700G-3A（350mm to 600mm）

743810939

1053

16418020269

100100130218

381417483543


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

400450500600

16182024

394441492584

469525580682

102114127154

338368403458

383413453528

364412465478

TGA-125TGA-140TGA-160TGA-180

101138204330

743810939939

1163

164180202202253

100100130130160

381417483483599

350400450500600

1416182024

337394441492584

410469525580682

78102114127154

276338368403458

348383413453528

364412465465525

TGA-125TGA-140TGA-160TGA-160TGA-200

80116188204390



Standard

Heavy duty

Sele

ctio

n cr

iteria

■700G-3A

700G（Wafer）

255

700G-17704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L

■Standard

■Heavy duty




743810939

1053

16418020269

100100130218

381417483543


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

400450500600

16182024

394441492584

469525580682

102114127154

338368403458

383413453528

364412465478


101138204330

743810939939

1163

164180202202253

100100130130160

381417483483599

350400450500600

1416182024

337394441492584

410469525580682

78102114127154

276338368403458

348383413453528

364412465465525


80116188204390



Standard

Heavy duty

Sele

ctio

n cr

iteria

■700G-3A

700G（Wafer）

700G-18704G705G

AP

φDφd φD

φd

AP

H1

H2

H3

L

f1 f2

Air port side

Air port side

Air port side

Air port side

Single-acting pneumatic cylinder type 700G-7G（Air to open： 40mm to 250mm） / 700G-7F（Air to close： 40mm to 250mm）

■Standard

■Heavy duty

45566984

104130153.5199253

8090

115126146181211256322

354346465256566068

61687986

103118135177215

132138151156167191202227280

168168203203203231231269269

364364449449449550550723723

183183226226226276276360360

75757979799191

118118

474757575769698585


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

40506580

100125150200250

1 1/22

2 1/23456810

T85ST85S

T200ST200ST200ST380ST380ST750ST750S

88

14141525264351

45566984

104130153.5

8090

115126146181211

35434646525656

61687986

103118135

132138151156167191202

168168203203231231269

364364449449550550723

183183226226276276360

757579799191

118

47475757696985

40506580

100125150

1 1/22

2 1/23456

T85ST85S

T200ST200ST380ST380ST750S

88

1414232540

■700G-7G■700G-7F

■7F Installation direction ■7G Installation direction

7 G A（standard） 7 G B7 F A（standard） 7 F B



Standard

Heavy duty

Sele

ctio

n cr

iteria

256

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-19704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■Standard

687878

102114127154

709494

131131164164

945108010801255125516551655

585720720865865

10951095

165206206257257348348


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

250300350400450500600

10121416182024

253302337394441492584

322367410469525580682

215253276338368403458

280312348383413453528

307307307340340474474

TG-10STG-12STG-12STG-14STG-14STG-20STG-20S

74126143262285525602

60687878

102114127154

709494

131131164164164

9451080108012551255165516551655

585720720865865

109510951095

165206206257257348348348

200250300350400450500600

810121416182024

199253302337394441492584

256322367410469525580682

177215253276338368403458

227280312348383413453528

307307307340340474474474

TG-10STG-12STG-12STG-14STG-14STG-20STG-20STG-20S

66119126239262498525602

■Heavy duty

3 K A（standard） 3 K B

■3K Installation direction

3 U A（standard） 3 U B


Single-acting pneumatic cylinder type 700G-3U（Air to open： 200mm to 600mm） / 700G-3K（Air to close： 200mm to 600mm）



Standard

Heavy duty

Sele

ctio

n cr

iteria

■700G-3K■700G-3U

700G（Wafer）

257

700G-19704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■Standard

687878

102114127154

709494

131131164164

945108010801255125516551655

585720720865865

10951095

165206206257257348348


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

250300350400450500600

10121416182024

253302337394441492584

322367410469525580682

215253276338368403458

280312348383413453528

307307307340340474474


74126143262285525602

60687878

102114127154

709494

131131164164164

9451080108012551255165516551655

585720720865865

109510951095

165206206257257348348348

200250300350400450500600

810121416182024

199253302337394441492584

256322367410469525580682

177215253276338368403458

227280312348383413453528

307307307340340474474474


66119126239262498525602

■Heavy duty








Standard

Heavy duty

Sele

ctio

n cr

iteria

■700G-3K■700G-3U

700G（Wafer）

700G-20704G705G

KF

φDφd

P

A

H1

H2

H3

L

4 I A（standard） 4 I B

■4I Installation direction

Single phase electric motor type 700G-4I（40mm to 500mm）

■700G-4 I

Note 1: For nominal size 40, 50 mm type (for control), the 4I-0 type should be selected. (The 4I-00 type is only designed for ON-OFF operation.)Remark: For 400mm type with the accessories below, type 4I-4 should be selected.　 ●Micom unit　 ●Servo unit　 ●Speed control unit　 ●Potentiometer

45

56

6984

104130153.5199253302337

394

441492

80

90

115126146181211256322367410

469

525580

35

43

464652565660687878

102

114127

61

68

7986

103118135177215253276

338

368403

132

138

151156167191202227280312348

383

413453

120150120150150150165198198198198230230230255230230

161202161202202202252310310310310388388388388388388

588558858585

126154154154154246246246246246246

4554455454546585858585

136136136136136136

8410084

100100100138167167167167223223223223223223

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 A P F K

Motortype

Nominal sizemm inch

40

50

6580

100125150200250300350

400

450500

1 1/2

2

2 1/234568101214

16

1820

4 I-004 I-0

4 I-004 I-04 I-04 I-04 I-14 I-24 I-2

4 I-2.54 I-2.54 I-34 I-34 I-34 I-44 I-44 I-4

45.74.366.76.89.8

16.618.221.630.848.2658793

116143

258

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-21704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1

■4J Installation direction

45566984

104130153.5199253302

8090

115126146181211256322367

35434646525656606878

61687986

103118135177215253

132138151156167191202227280312

218218218218218218218235235235

353353353353353353353393393393

286286286286286286286330330330

104104104104104104104130130130

167167167167167167167191191191

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3

3.23.23.23.23.2

15153.23.2

20

H4 A P F KMotor type

Nominal sizemm inch

40506580

100125150200250300

1 1/22

2 1/2345681012

SRJ-010SRJ-010SRJ-010SRJ-010SRJ-010SRJ-020SRJ-020SRJ-060SRJ-060SRJ-060

15.215.516.216.316.919.621385061

4 J A 4 J B

Three phase motor actuator type 700G-4J（40mm to 300mm）

■700G-4J

700G（Wafer）

259

700G-21704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1


45566984

104130153.5199253302

8090

115126146181211256322367

35434646525656606878

61687986

103118135177215253

132138151156167191202227280312

218218218218218218218235235235

353353353353353353353393393393

286286286286286286286330330330

104104104104104104104130130130

167167167167167167167191191191


3.23.23.23.23.2

15153.23.2

20


Nominal sizemm inch

40506580

100125150200250300

1 1/22

2 1/234568

1012

SRJ-010SRJ-010SRJ-010SRJ-010SRJ-010SRJ-020SRJ-020SRJ-060SRJ-060SRJ-060

15.215.516.216.316.919.621385061

4 J A 4 J B


■700G-4J

700G（Wafer）

700G-22704G705G

E K

M P

φDφd

F

L

H3

H2

H1

Three phase motor actuator type 700G-4L（350mm to 600mm）

Dimension (mm) Approx.Mass(kg)φd L H1 H2 H3 E K F M PφD

Nominal sizemm inch

350

400

450

500

600

14

16

18

20

24

337

394

441

492

584

410

469

525

580

682

78

102

114

127

154

276

338

368

403

458

348

383

413

453

528

487

487

487

487

590

117

117

117

117

140

164

164

164

164

198

533

533

533

533

637

357

357

370

370

440

230

230

230

230

375

LTKD-01 0.2kW/MGH-3

LTKD-01 0.2kW/MGH-3

LTKD-01 0.4kW/MGH-3

LTKD-01 0.4kW/MGH-3

LTKD-05 0.75kW/MGH-4

143

165

192

219

398

Motor type

■700G-4L

4 L A（standard） 4 L B

■4L Installation direction

260

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-23704G705G

W

φD

L

φd

H3

H2

H1


Dimension (mm)Approx.Mass

(kg)Levertypeφd L H1 H2

φDNominal size

JIS5K JIS10Kmm inch

506580

100125150200

22 1/2

34568

566984

104130153.5199

90115126223250276334

90115190223250276329

43464652565660

8594

109117143164186

138151156167191202227

66666666929297

H3 W

200200200200300300350

1T-11T-11T-11T-11T-21T-21T-3

3.1 4.1 4.6 (5.4) 8 11.9 15.1 22.2 (23.7)

Remark: Value in brackets is for JIS 10K flanges.


1 T X S 1 T X R 1 T V S 1 T V R



■704G-1T

261

700G-23704G705G

W

φD

L

φd

H3

H2

H1


Dimension (mm)Approx.Mass

(kg)Levertypeφd L H1 H2

φDNominal size

JIS5K JIS10Kmm inch

506580

100125150200

22 1/2

34568

566984

104130153.5199

90115126223250276334

90115190223250276329

43464652565660

8594

109117143164186

138151156167191202227

66666666929297

H3 W

200200200200300300350

1T-11T-11T-11T-11T-21T-21T-3

3.1 4.1 4.6 (5.4) 8 11.9 15.1 22.2 (23.7)



1 T X S 1 T X R 1 T V S 1 T V R



■704G-1T

700G-24704G705G

φD

H1

H2

H3

L

EK

φd

φW

F



■704G-2U



566984

104130153.5199253302337394441492584

90115126223250276334402472533597634696820

90115190223250276329402438505597626696795

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

29.529.529.529.534.534.541.541.5484850505061

363636364444676787.587.5909090

113

160160160160173.5173.5198198222.5222.5266266266352

46464646535375759090

105105105140

100100100100160160200200200280280280280400

Dimension (mm) Approx.Mass(kg)φd L H1 H2 H3 E K F W

Gear typeφDNominal size

JIS5K JIS10Kmm inch

506580

100125150200250300350400450500600

22 1/2

3456810121416182024

2U-02U-02U-12U-12U-22U-22U-32U-32U-42U-42U-52U-52U-52U-6

4.85.86.3 (7.1)9.7

14.818.827 (28.5)4058 (56)86 (86)

123148 (151)195306 (300)

262

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-25704G705G

φD

L

φd

φW

H1

H2

H3


■704G-2G/2R


Dimension (mm) Approx.Mass(kg)φd L H1 H2

Centerhandletype

φDNominal size

JIS5K JIS10Kmm inch

506580

100125150200250300350400450500600

221/2

3456810121416182024

566984

104130153.5199253302337394441492584

90115126223250276334402472533597634696820

90115190223250276329402438505597626696795

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

136136136136133133151151161409409409409498

H3 W

100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

5.46.46.9 (7.7)

10.314.417.626.1 (27.6)4052 (50)

103 (103)140 166 (169)213328 (322)


263

700G-25704G705G

φD

L

φd

φW

H1

H2

H3


■704G-2G/2R


Dimension (mm) Approx.Mass(kg)φd L H1 H2

Centerhandletype

φDNominal size

JIS5K JIS10Kmm inch

506580

100125150200250300350400450500600

221/2

34568

10121416182024

566984

104130153.5199253302337394441492584

90115126223250276334402472533597634696820

90115190223250276329402438505597626696795

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

136136136136133133151151161409409409409498

H3 W

100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

5.46.46.9 (7.7)

10.314.417.626.1 (27.6)4052 (50)

103 (103)140 166 (169)213328 (322)


700G-26704G705G

L

H3

H2

H1

f1 f2A

P

φDφd

Air port side

Air port side


■Heavy duty

■Standard

566984

104130153.5199253302337

90115126223250276334402472533

90115190223250276329402438505

43464652565660687878

8594

109117143164176215253276

138151156167191202227280312348

125125168168168203231231269269

228228276276276346423423546546

5757757575799191

118118

116116142142142176214214270270

29294747475769698585


φDL

JIS5K JIS10K

JIS5K JIS10K

H1 H2 H3 A P f1 f2Cylinder type

Nominal size

mm inch

506580

100125150200250300350

22 1/2

34568101214


φDL H1 H2 H3 A P f1 f2

Cylinder type

Nominal size

mm inch

506580

100125150200250300

22 1/2

345681012

T35T35T85T85T85

T200T380T380T750T750

56

11 (10)12141929 (31)416394

566984

104130153.5199253302

90115126223250276334402472

90115190223250276329402438

434646525656606878

8594

109117143164176215253

138151156167191202227280312

125125168203203203231231269

228228276346346346423423546

5757757979799191

118

116116142176176176214214270

292947575757696985

T35T35T85

T200T200T200T380T380T750

56

11 (10)15171929 (31)4163

■704G-7E





Standard

Heavy duty

Sele

ctio

n cr

iteria

264

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-27704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L


■704G-3A

■Standard


■Heavy duty



Dimension (mm) Approx.Mass(kg)φd L H1 H2 H3 A P f1 f2

Cylindertype

φDNominal size

JIS5K JIS10Kmm inch


Cylindertype

φDNominal size

JIS5K JIS10Kmm inch

400450500600

16182024

394441492584

597634696820

597626696795

102114127154

338368403458

383413453528

364412465478

743810939

1053

381417483543

100100130130

164180202218


153191269414 (408)

350400450500600

1416182024

337394441492584

533597634696820

505597626696795

78102114127154

276338368403458

348383413453528

364412465465525

743810939939

1163

381417483483599

100100130130160

164180202202253


109159233 (236)269474 (468)



Standard

Heavy duty

Sele

ctio

n cr

iteria


265

700G-27704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L


■704G-3A

■Standard


■Heavy duty




Cylindertype

φDNominal size

JIS5K JIS10Kmm inch


Cylindertype

φDNominal size

JIS5K JIS10Kmm inch

400450500600

16182024

394441492584

597634696820

597626696795

102114127154

338368403458

383413453528

364412465478

743810939

1053

381417483543

100100130130

164180202218


153191269414 (408)

350400450500600

1416182024

337394441492584

533597634696820

505597626696795

78102114127154

276338368403458

348383413453528

364412465465525

743810939939

1163

381417483483599

100100130130160

164180202202253


109159233 (236)269474 (468)



Standard

Heavy duty

Sele

ctio

n cr

iteria


700G-28704G705G

AP

φDφd φD

φd

AP

H1

H2

H3

L

f1 f2

Air port side Air port side

Air port side Air port side

■Standard


■Heavy duty

566984

104130153.5199253

90115126223250276334402

90115190223250276329402

4346465256566068

8594

109117143164176215

138151156167191202227280

168203203203231231269269

364449449449550550723723

757979799191

118118

183226226226276276360360

4757575769698585


φDJIS5K JIS10K

L H1 H2 H3 A P f1 f2Cylinder

type

Nominal size

mm inch


φDJIS5K JIS10K

L H1 H2 H3 A P f1 f2Cylinder

type

Nominal size

mm inch

506580

100125150200250

22 1/2

3456810

T85ST200ST200ST200ST380ST380ST750ST750S

91515 (16)19303352 (53)65

566984

104130153.5

90115126223250276

90115190223250276

434646525656

8594

109117143164

138151156167191202

168203203231231269

364449449550550723

183226226276276360

7579799191

118

475757696985

506580

100125150

22 1/2

3456

T85ST200ST200ST380ST380ST750S

91515 (16)273047

■704G-7G■704G-7F





Standard

Heavy duty

Sele

ctio

n cr

iteria

266

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-29704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■704G-3U ■704G-3K

■Standard


φd L H1 H2 H3 A P f1 f2φD

JIS5K JIS10Kmm inch

250300350400450500600

10121416182024

253302337394441492584

402472533597634696820

402438505597626696795

687878

102114127154

215253276338368403458

280312348383413453528

307307307340340474474

945108010801255125516551655

9451080108012551255165516551655

709494

131131164164

709494

131131164164164

165206206257257348348

165206206257257348348348

585720720865865

10951095

585720720865865

109510951095


88145 (143)171 (171)305330 (333)590686 (680)

Approx.Mass(kg)

Dimension (mm)Cylinder

type

Nominal size


JIS5K JIS10Kmm inch

Approx.Mass(kg)


type

Nominal size

■Heavy duty

200250300350400450500600

810121416182024

199253302337394441492584

334402472533597634696820

329402438505597626696795

60687878

102114127154

186215253276338368403458

227280312348383413453528

307307307340340474474474


75 (77)133145 (143)267 (267)305543 (546)590686 (680)








Standard

Heavy duty

Sele

ctio

n cr

iteria


267

700G-29704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■704G-3U ■704G-3K

■Standard



JIS5K JIS10Kmm inch

250300350400450500600

10121416182024

253302337394441492584

402472533597634696820

402438505597626696795

687878

102114127154

215253276338368403458

280312348383413453528

307307307340340474474

945108010801255125516551655

9451080108012551255165516551655

709494

131131164164

709494

131131164164164

165206206257257348348

165206206257257348348348

585720720865865

10951095

585720720865865

109510951095


88145 (143)171 (171)305330 (333)590686 (680)

Approx.Mass(kg)


type

Nominal size


JIS5K JIS10Kmm inch

Approx.Mass(kg)


type

Nominal size

■Heavy duty

200250300350400450500600

810121416182024

199253302337394441492584

334402472533597634696820

329402438505597626696795

60687878

102114127154

186215253276338368403458

227280312348383413453528

307307307340340474474474


75 (77)133145 (143)267 (267)305543 (546)590686 (680)








Standard

Heavy duty

Sele

ctio

n cr

iteria


700G-30704G705G

KF

φDφd

P

A

H1

H2

H3

L


■704G-4 I


■4I Installation direction

Dimension (mm) Approx.Mass(kg)φd L H1 H2 H3 A P F K

MotortypeφD

Nominal size

JIS5K JIS10Kmm inch

50

6580

100125150200250300350

400

450500

2

2 1/234568101214

16

1820

56

6984

104130153.5199253302337

394

441492

90

115126223250276334402472533

597

634696

90

115190223250276329402438505

597

626696

43

464652565660687878

102

114127

85

94109117143164186215253276

338

368403

138

151156167191202227280312348

383

413453

120150150150165198198198198230230230255230230

161202202202252310310310310388388388388388388

84100100100138167167167167223223223223223223

58858585

126154154154154246246246246246246

455454546585858585

136136136136136136

4 I-004 I-04 I-04 I-04 I-14 I-24 I-2

4 I-2.54 I-2.54 I-34 I-34 I-34 I-44 I-44 I-4

5.96.77.78.2

13.821.82530.2456893

130136161208

(9)

(31.7)

(66)(93)

(164)

Note 1: For nominal size 50 mm (for control), the 4I-0 type should be selected. (The 4I-00 type is only designed for ON-OFF operation.)Remark: Value in brackets is for JIS 10K flanges.Remark: For 300mm with the accessories below, type 4I-4 should be selected. ●Micom unit ●Servo unit ●Speed control unit ●Potentiometer

268

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-31704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1


■704G-4J


Motor typeφDNominal size

JIS5K JIS10Kmm inch

506580

100125150200250300

22 1/2

345681012

566984

104130153.5199253302

434646525656606878

90115190223250276329402438

90115126223250276334402472

8594

109117143164186215253

138151156167191202227280312

3.23.23.23.2

15153.23.2

20

H3

218218218218218218235235235

353353353353353353393393393

286286286286286286330330330

104104104104104104130130130

167167167167167167191191191

SRJ-010SRJ-010SRJ-010SRJ-010SRJ-020SRJ-020SRJ-060SRJ-060SRJ-060

15.516.51710.423.626.8375062

(17.8)

(33.5)(42)



4 J A 4 J B


269

700G-31704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1


■704G-4J


Motor typeφDNominal size

JIS5K JIS10Kmm inch

506580

100125150200250300

22 1/2

34568

1012

566984

104130153.5199253302

434646525656606878

90115190223250276329402438

90115126223250276334402472

8594

109117143164186215253

138151156167191202227280312

3.23.23.23.2

15153.23.2

20

H3

218218218218218218235235235

353353353353353353393393393

286286286286286286330330330

104104104104104104130130130

167167167167167167191191191


15.516.51710.423.626.8375062

(17.8)

(33.5)(42)



4 J A 4 J B


700G-32704G705G

E K

M P

φDφd

F

L

H3

H2

H1



Motor typeφd L H1 H2 H3 E K F M PφD

Nominal size

JIS5K JIS10Kmm inch

350

400

450

500

600

14

16

18

20

24

337

394

441

492

584

533

597

634

696

820

505

597

626

696

795

78

102

114

127

154

276

338

368

403

458

348

383

413

453

528

487

487

487

487

590

117

117

117

117

140

164

164

164

164

198

533

533

533

533

637

357

357

370

370

440

230

230

230

230

375

LTKD-01 0.2kW/MGH-3

LTKD-01 0.2kW/MGH-3

LTKD-01 0.4kW/MGH-3

LTKD-01 0.4kW/MGH-3


171 (171)

208

237 (240)

284

482 (476)


■704G-4L



270

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-33704G705G

W

φD

L

φd

H3

H2

H1


Lever typeDimension (mm) Approx.Mass

(kg)φd φD L H1 H2 H3 WNominal sizemm inch

506580

100125150200

22 1/2

34568

566984

104130153199.0

90115126146181211256

43464652565660

8594

109117143164186

138151156167191202227

66666666929297

200200200200300300350

1T-11T-11T-11T-11T-21T-21T-3

3.14.14.65.69.3

12.316.7

■705G-1T


1 T X S 1 T X R 1 T V S 1 T V R



271

700G-33704G705G

W

φD

L

φd

H3

H2

H1


Lever typeDimension (mm) Approx.Mass

(kg)φd φD L H1 H2 H3 WNominal sizemm inch

506580

100125150200

22 1/2

34568

566984

104130153199.0

90115126146181211256

43464652565660

8594

109117143164186

138151156167191202227

66666666929297

200200200200300300350

1T-11T-11T-11T-11T-21T-21T-3

3.14.14.65.69.3

12.316.7

■705G-1T


1 T X S 1 T X R 1 T V S 1 T V R



700G-34704G705G

φD

H1

H2

H3

L

EK

φd

φW

F



■705G-2U


566984

104130153.5199253302337394441492584

90115126146181211256322367410469525580682

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

29.529.529.529.534.534.541.541.5484850505061

36363636444467678787.5909090

113

160160160160173.5173.5198198222.5222.5266266266352

46464646535375759090

105105105140

100100100100160160200200200280280280280400

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 E K F W

Gear typeNominal sizemm inch

506580

100125150200250300350400450500600

22 1/2

3456810121416182024

2U-02U-02U-12U-12U-22U-22U-32U-32U-42U-42U-52U-52U-52U-6

4.85.86.37.3

12.2162332456388

112143222

272

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-35704G705G

φD

L

φd

φW

H1

H2

H3


■705G-2G/2R



Nominal sizemm inch

506580

100125150200250300350400450500600

22 1/2

3456810121416182024

566984

104130153.5199253302337394441492584

90115126146181211256322367410469525580682

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

136136136136133133151151161409409409409498

100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

5.46.46.97.9

11.814.822.1323980

105130161244


273

700G-35704G705G

φD

L

φd

φW

H1

H2

H3


■705G-2G/2R



Nominal sizemm inch

506580

100125150200250300350400450500600

22 1/2

34568

10121416182024

566984

104130153.5199253302337394441492584

90115126146181211256322367410469525580682

43464652565660687878

102114127154

8594

109117143164186215253276338368403458

138151156167191202227280312348383413453528

136136136136133133151151161409409409409498

100100100100100100200200200355355355355450

2G-12G-12G-12G-12G-22G-22G-32G-32G-42R-32R-32R-32R-32R-4

5.46.46.97.9

11.814.822.1323980

105130161244


700G-36704G705G

L

H3

H2

H1

f1 f2A

P

φDφd

Air port side

Air port side


■Standard

■Heavy duty

566984

104130153.5199253302337

90115126146181211256322367410

43464652565660687878

8594

109117143164186215253276

138151156167191202227280312348

125125168168168203231231269324

228228276276276346423423546546

5757757575799191

118118

116116142142142176214214270270

29294747475769698585


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

506580

100125150200250300350

22 1/2

34568101214

T35T35T85T85T85

T200T380T380T750T750

569

10131929385579

566984

104130153.5199253302

90115126146181211256322367

434646525656606878

8594

109117143164186215253

138151156167191202227280312

125125168203203203231231269

228228276346346346423423546

5757757979799191

118

116116142176176176214214270

292947575757696985

506580

100125150200250300

22 1/2

345681012

T35T35T85

T200T200T200T380T380T750

569

131619293855

■705G-7E





Standard

Heavy duty

Sele

ctio

n cr

iteria

274

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-37704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L


■705G-3A

■Standard

■Heavy duty


■ 3A Installation direction

743810939

1053

164180202218

100100130130

381417483543


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

400450500600

16182024

394441492584

469525580682

102114127154

338368403458

383413453528

364412465478


110150217330

743810939939

1163

164180202202253

100100130130160

381417483483599

350400450500600

1416182024

337394441492584

410469525580682

78102114127154

276338368403458

348383413453528

364412465465525


85124197217390



Standard

Heavy duty

Sele

ctio

n cr

iteria


275

700G-37704G705G

A

P

H2

H3

H1

φD φd

f1 f2

L


■705G-3A

■Standard

■Heavy duty


■ 3A Installation direction

743810939

1053

164180202218

100100130130

381417483543


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

400450500600

16182024

394441492584

469525580682

102114127154

338368403458

383413453528

364412465478


110150217330

743810939939

1163

164180202202253

100100130130160

381417483483599

350400450500600

1416182024

337394441492584

410469525580682

78102114127154

276338368403458

348383413453528

364412465465525


85124197217390



Standard

Heavy duty

Sele

ctio

n cr

iteria


700G-38704G705G

AP

φDφd φD

φd

AP

H1

H2

H3

L

f1 f2

Air port side

Air port side

Air port side

Air port side

■Standard


■Heavy duty

566984

104130153.5199253

90115126146181211256322

4346465256566068

8594

109117143164186215

138151156167191202227280

168203203203231231269269

364449449449550550723723

757979799191

118118

183226226226276276360360

4757575769698585


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

506580

100125150200250

22 1/2

3456810

T85ST200ST200ST200ST380ST380ST750ST750S

914151627304857

566984

104130153.5

90115126146181211

434646525656

8594

109117143164

138151156167191202

168203203231231269

369449449550550723

183226226276276360

7579799191

118

475757696985

506580

100125150

22 1/2

3456

T85ST200ST200ST380ST380ST750S

91415242744



■705G-7G■705G-7F



Standard

Heavy duty

Sele

ctio

n cr

iteria

276

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-39704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■705G-3K■705G-3U

■Standard


687878

102114127154

709494

131131164164

945108010801255125516551655

585720720865865

10951095

165206206257257348348


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

250300350400450500600

10121416182024

253302337394441492584

322367410469525580682

215253276338368403458

280312348383413453528

307307307340340474474


80132148270294538602

60687878

102114127154

709494

131131164164164

9451080108012551255165516551655

585720720865865

109510951095

165206206257257348348348

200250300350400450500600

810121416182024

199253302337394441492584

256322367410469525580682

186215253276338368403458

227280312348383413453528

307307307340340474474474


71125132244270507538602

■Heavy duty


■ 3K Installation direction


■ 3U Installation direction



Standard

Heavy duty

Sele

ctio

n cr

iteria


277

700G-39704G705G

AP

φDφd

AP

φDφd

f1f2

H1

H2

H3

L

■705G-3K■705G-3U

■Standard


687878

102114127154

709494

131131164164

945108010801255125516551655

585720720865865

10951095

165206206257257348348


Cylindertype

Nominal sizemm inch


Cylindertype

Nominal sizemm inch

250300350400450500600

10121416182024

253302337394441492584

322367410469525580682

215253276338368403458

280312348383413453528

307307307340340474474


80132148270294538602

60687878

102114127154

709494

131131164164164

9451080108012551255165516551655

585720720865865

109510951095

165206206257257348348348

200250300350400450500600

810121416182024

199253302337394441492584

256322367410469525580682

186215253276338368403458

227280312348383413453528

307307307340340474474474


71125132244270507538602

■Heavy duty


■ 3K Installation direction


■ 3U Installation direction



Standard

Heavy duty

Sele

ctio

n cr

iteria


700G-40704G705G

KF

φDφd

PA

H1

H2

H3

L


■ 4I Installation direction


■705G-4 I

56

6984

104130153.5199253302337

394

441492

90

115126146181211256322367410

469

525580

43

464652565660687878

102

114127

85

94109117143164186215253276

338

368403

138

151156167191202227280312348

383

413453

120150150150165198198198198230230230255230230

161202202202252310310310310388388388388388388

58858585

126154154154154246246246246246246

455454546585858585

136136136136136136

84100100100138167167167167223223223223223223

Dimension (mm) Approx.Mass(kg)φd φD L H1 H2 H3 A P F K

Motor typeNominal sizemm inch

50

6580

100125150200250300350

400

450500

2

2 1/234568101214

16

1820

4 I-004 I-04 I-04 I-04 I-14 I-24 I-2

4 I-2.54 I-2.54 I-34 I-34 I-34 I-44 I-44 I-4

5.36.77.78.2

11.419.222.226.237557095

101125156

Note 1: For nominal size 50 mm type (for control), the 4I-0 type should be selected. (The 4I-00 type is only designed for ON-OFF operation.)Remark: For 400mm type with the accessories below, type 4I-4 should be selected. ●Micom unit ●Servo unit ●Speed control unit ●Potentiometer

278

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-41704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1

L

H3

H2

H1

φDφd

FE K

M P



■705G-4L

φd L H1 H2 H3 E K F M PφDmm inch

350

400

450

500

600

14

16

18

20

24

337

394

441

492

584

410

469

525

580

682

78

102

114

127

154

276

338

368

403

458

348

383

413

453

528

487

487

487

487

590

117

117

117

117

140

164

164

164

164

198

533

533

533

533

637

357

357

370

370

440

230

230

230

230

375

LTKD-01 0.2kW/MGH-3

LTKD-01 0.2kW/MGH-3

LTKD-01 0.4kW/MGH-3

LTKD-01 0.4kW/MGH-3


148

173

201

232

398




Motor typeNominal size

■705G-4J ■4J Installation direction

566984

104130153.5199253302

90115126146181211256322367

434646525656606878

8594

109117143164186215253

138151156167191202227280312

3.23.23.23.2

15153.23.2

20

353353353353353353393393393

286286286286286286330330330

104104104104104104130130130

167167167167167167191191191


218218218218218218235235235


Nominal sizemm inch

506580

100125150200250300

22 1/2

345681012


16.217.217.718.522.225435667

4 J A 4 J B


279

700G-41704G705G

FA

L

L2

KP

φD

φd

H3

H4

H2

H1

L

H3

H2

H1

φDφd

FE K

M P



■705G-4L

φd L H1 H2 H3 E K F M PφDmm inch

350

400

450

500

600

14

16

18

20

24

337

394

441

492

584

410

469

525

580

682

78

102

114

127

154

276

338

368

403

458

348

383

413

453

528

487

487

487

487

590

117

117

117

117

140

164

164

164

164

198

533

533

533

533

637

357

357

370

370

440

230

230

230

230

375

LTKD-01 0.2kW/MGH-3

LTKD-01 0.2kW/MGH-3

LTKD-01 0.4kW/MGH-3

LTKD-01 0.4kW/MGH-3


148

173

201

232

398




Motor typeNominal size

■705G-4J ■4J Installation direction

566984

104130153.5199253302

90115126146181211256322367

434646525656606878

8594

109117143164186215253

138151156167191202227280312

3.23.23.23.2

15153.23.2

20

353353353353353353393393393

286286286286286286330330330

104104104104104104130130130

167167167167167167191191191


218218218218218218235235235


Nominal sizemm inch

506580

100125150200250300

22 1/2

34568

1012


16.217.217.718.522.225435667

4 J A 4 J B


700G-42704G705G

(fully open)

50000

10000

5000

1000

500

100

50

10

5

20゜30゜ 40゜50゜ 60゜70゜ 80゜ 90゜

600mm500mm450mm400mm350mm300mm250mm200mm150mm125mm100mm80mm

65mm50mm40mm

(fully open)

5000

10000

1000

500

100

50

10

5

1

0.5

20゜30゜ 40゜50゜ 60゜70゜ 80゜ 90゜

40

mm

mm

mm

5065

80 to 100350 to 600

125 to 300

●Cv value ●Pressure loss coefficient

700G/704G/705G Cv value/pressure loss coefficient

700G/704G/705G Cv value

mm 20ﾟ 30ﾟ 40ﾟ 50ﾟ 60ﾟ 70ﾟ 80ﾟ 90ﾟinch40506580

100125150200250300350400450500600

58

121527456067

130194232468583758

1037

915253358

109148188351487662964

120215552141

16254157

100189262347675972

13501648206826563681

25406495

162295423576

1225176420302724344843796129

3964

102163269453685969

212530113294452956927214

10106

61103162271444719

1147169833754966516768158384

1084514911

95160260450749

114418972902509174127832

10553131161710022827

121200320580880

159028004300620089009620

12700155001980027300

1 1/22

2 1/23456810121416182024

Pre

ssur

e lo

ss c

oeffi

cien

t

Cv

valu

e

Valve opening Valve opening

Valve openingNominal size

280

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-43704G705G

700G Applicable Flange Standard

○ : Can be used without flange drilling. ◎ : Can be used without flange drilling. (Use ANSI body.) △ : With additional flange drilling. T : With flange tapping. × : Not applicable.

BS10125Lb○○○◎◎◎○◎○◎×××××

150Lb○○○◎◎◎○◎○◎×××××

PN10○○○◎◎◎○◎○◎×××××

PN16○○○◎◎◎○◎○◎×××××

NP10○○○◎◎◎○◎○◎×××××

NP16○○○◎◎◎○◎○◎×××××

Table E○○△○○○○○○○×××××

40506580

100125150200250300350400450500600

Nominal sizemm inch

1 1/22

2 1/23456810121416182024

10K○○○○○○○○○○○○○○T

5K○○○○○○○○○○○○○○T

JIS ANSI BS4504 DIN

700G / 704G / 705G Pressure Loss Coefficient

mm 20ﾟ 30ﾟ 40ﾟ 50ﾟ 60ﾟ 70ﾟ 80ﾟ 90ﾟinch264257310394350316348849528488531227239218247

72687583785357

10672786554565258

262528272618183120201618191820

101011101077

116677777

444343342232323

222111111111111

1110.40.40.40.30.40.30.30.40.40.40.41

0.40.40.40.20.30.20.10.20.20.20.30.30.30.30.3


40506580

100125150200250300350400450500600


1 1/22

2 1/23456810121416182024

281

700G-43704G705G


○ : Can be used without flange drilling. ◎ : Can be used without flange drilling. (Use ANSI body.) △ : With additional flange drilling. T : With flange tapping. × : Not applicable.

BS10125Lb○○○◎◎◎○◎○◎×××××

150Lb○○○◎◎◎○◎○◎×××××

PN10○○○◎◎◎○◎○◎×××××

PN16○○○◎◎◎○◎○◎×××××

NP10○○○◎◎◎○◎○◎×××××

NP16○○○◎◎◎○◎○◎×××××

Table E○○△○○○○○○○×××××

40506580

100125150200250300350400450500600

Nominal sizemm inch

1 1/22

2 1/234568

10121416182024

10K○○○○○○○○○○○○○○T

5K○○○○○○○○○○○○○○T

JIS ANSI BS4504 DIN

700G / 704G / 705G Pressure Loss Coefficient

mm 20ﾟ 30ﾟ 40ﾟ 50ﾟ 60ﾟ 70ﾟ 80ﾟ 90ﾟinch264257310394350316348849528488531227239218247

72687583785357

10672786554565258

262528272618183120201618191820

101011101077

116677777

444343342232323

222111111111111

1110.40.40.40.30.40.30.30.40.40.40.41

0.40.40.40.20.30.20.10.20.20.20.30.30.30.30.3


40506580

100125150200250300350400450500600


1 1/22

2 1/234568

10121416182024

700G-44704G705G


○D/T : Drilled or tapped hole ◎D/T : Drilled or tapped hole (JIS 5K / ANSI body used) △D/T : Drilled or tapped hole (DIN body used) ○T : Tapped hole only ◎T : Tapped hole only (JIS 5K / ANSI body used) △T : Tapped hole only (DIN body used)

D/T : Drilled or tapped hole T : Tapped hole only

BS10125Lb○D/T○D/T◎D/T○D/T○D/T○D/T◎D/T○D/T◎D/T◎D/T○D/T◎D/T○D/T◎T

150Lb○D/T○D/T◎D/T○D/T○D/T○D/T◎D/T○D/T◎D/T◎D/T○D/T◎D/T○D/T◎T

PN10○D/T○D/T○D/T○D/T○D/T○D/T◎D/T○D/T◎D/T○D/T○D/T○D/T○D/T◎T

PN16○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T◎D/T○D/T○D/T○D/T○D/T◎T

NP10○D/T○D/T○D/T○D/T○D/T○D/T◎D/T○D/T◎D/T○D/T○D/T○D/T○D/T◎T

NP16○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T◎D/T○D/T○D/T○D/T○D/T◎T

Table E○D/T○D/T◎D/T○D/T○D/T○D/T◎D/T○D/T◎D/T◎D/T△D/T○D/T△D/T△T

506580

100125150200250300350400450500600

mm inch2

2 1/23456810121416182024

10K○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○D/T○T

5K○D/T○D/T◎D/T○D/T○D/T○D/T◎D/T○D/T◎D/T◎D/T○D/T◎D/T○D/T◎T

JIS ANSI BS4504 DINNominal size

BS10125Lb 150Lb PN10 PN16 NP10 NP16 Table E

506580

100125150200250300350400450500600

mm inch2

2 1/23456810121416182024

10K5KJIS ANSI BS4504 DINNominal size


D/TD/TD/TD/TD/TD/TD/TD/TD/TD/TD/TD/TD/TT









282

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-45704G705G

Minimum internaldiameter of piping

A


VP pipe (flange)


t

t

B

Nominal size

40

50

65

80

100

125

150

200

250

300

350

400

450

500

600

1 1/2

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

○○○○○○○○○○○○○○－

mm inch－－－－－－－－－－○○○○○

－○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○

○○○○○○○○○○○－－－－

○○○○○○○○○○－－－－－

○○○○○○○○○○－－－－－

25

34

51

70

91

118

144

194

246

294

330

381

427

477

567

Minimum internaldiameters of piping

(mm)Sch20SGP STPY Sch40 Sch10S Sch20S

○○○○○○○○○○○○○○－

－－－－－－－－－－○○○○○

－○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○

○○○○○○○○○○－－－－－

○○○○○○○○○○－－－－－

Remark 1: The symbols above mean the following. ○: Piping possible －: Not standardizedRemark 2: Butterfly valves are inserted into a pipe that was fitted with the disc when fully open. In cases where you are using a pipe or flange that is less than the minimum inner pipe diameter, use is still possible if means are taken such as inserting a spacer between the valve and flange. For details, please consult us.

700G / 704G / 705G Applicable Pipe List in Case of B

700G / 704G / 705G Applicable Pipe List in Case of A

VP(TS flange)

Nominal size

40

50

65

80

100

125

150

200

250

300

350

400

450

500

600

1 1/2

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

mm inchSch20SGP STPY Sch40 Sch10S Sch20S


283

700G-45704G705G


A


VP pipe (flange)


t

t

B

Nominal size

40

50

65

80

100

125

150

200

250

300

350

400

450

500

600

1 1/2

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

○○○○○○○○○○○○○○－

mm inch－－－－－－－－－－○○○○○

－○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○

○○○○○○○○○○○－－－－

○○○○○○○○○○－－－－－

○○○○○○○○○○－－－－－

25

34

51

70

91

118

144

194

246

294

330

381

427

477

567

Minimum internaldiameters of piping

(mm)Sch20SGP STPY Sch40 Sch10S Sch20S

○○○○○○○○○○○○○○－

－－－－－－－－－－○○○○○

－○○○○○○○○○○○○○○

○○○○○○○○○○○○○○○

○○○○○○○○○○－－－－－

○○○○○○○○○○－－－－－

Remark 1: The symbols above mean the following. ○: Piping possible －: Not standardizedRemark 2: Butterfly valves are inserted into a pipe that was fitted with the disc when fully open. In cases where you are using a pipe or flange that is less than the minimum inner pipe diameter, use is still possible if means are taken such as inserting a spacer between the valve and flange. For details, please consult us.

700G / 704G / 705G Applicable Pipe List in Case of B

700G / 704G / 705G Applicable Pipe List in Case of A

VP(TS flange)

Nominal size

40

50

65

80

100

125

150

200

250

300

350

400

450

500

600

1 1/2

2

2 1/2

3

4

5

6

8

10

12

14

16

18

20

24

mm inchSch20SGP STPY Sch40 Sch10S Sch20S


700G-46704G705G

M

S SL

L

M

S

Setting bolt holes

Setting bolt holes

Nominal size

Nominal size

Hexagon Bolts and Nuts Hexagon Bolts and Nuts

Long Bolts and Nuts Long Bolts and Nuts Long Bolts and Nuts

Long bolts and nuts

Setting bolts (Hexagon bolts)

■For Hexagon Bolts and Nuts

700G Piping Bolts and Nuts Sizes

mm inch40506580

100125150200250300350400450500600

1 1/22

2 1/23456810121416182024

JIS 5K JIS 10K

4-M12× 75×304-M12× 90×304-M12× 90×304-M16× 95×388-M16×105×388-M16×110×388-M16×115×388-M20×130×5212-M20×140×5212-M20×150×5212-M22×155×4516-M22×180×4516-M22×190×4520-M22×205×4516-M24×235×50

——————————————

8-M24× 70×54

4-M16× 90×384-M16×100×384-M16×105×388-M16×105×388-M16×110×388-M20×125×468-M20×130×5212-M20×130×5212-M22×150×6016-M22×160×6016-M22×160×4516-M24×190×4520-M24×205×4520-M24×215×4520-M30×255×60

——————————————

8-M30× 75×60

Setting Bolts Setting Bolts

■For Long Bolts and Nuts

mm inch40506580

100125150200250300350400450500600

1 1/22

2 1/23456810121416182024

JIS 5K JIS 10K ANSI 125Lb/150Lb

4-M12× 95×254-M12×105×254-M12×110×254-M16×120×308-M16×130×308-M16×130×308-M16×140×358-M20×155×40

12-M20×165×4012-M20×175×4012-M22×185×4516-M22×205×4516-M22×225×4520-M22×230×4516-M24×275×50

Setting Bolts

——————————————

8-M24× 70×54

——————————————

8-M30× 75×60

Setting Bolts Setting Bolts

——————————————

8-U1 1/4×95×70

4-M16×110×254-M16×120×304-M16×125×308-M16×125×308-M16×130×308-M20×150×408-M20×155×40

12-M20×165×4012-M22×175×4516-M22×185×4516-M22×185×4516-M24×220×5020-M24×245×5020-M24×265×5020-M30×300×60

4-U1/2 ×110×32 4-U5/8 ×140×38 4-U5/8 ×140×38 4-U5/8 ×140×38 8-U5/8 ×150×38 8-U3/4 ×160×51 8-U3/4 ×165×51 8-U3/4 ×175×5112-U7/8 ×195×5812-U7/8 ×205×5812-U1 ×22516-U1 ×25516-U1 1/8 ×28020-U1 1/8 ×29516-U1 1/4 ×340

Remarks:1. Please use a hexagon nut with 80% threading. (For ANSI, use heavy nut.)2. A unified screw should have 8 threads per inch if its nominal diameter exceeds 1 inch.* Nominal size “600 mm” requires hexagon bolt for setting.

Long bolts: 12 - M22 × 185 × 45

Quantity　Nominal size (M)　Length of bolt (L)　Effective screw length (S)

Example

Setting bolts: 4 - M30 × 95 × 65


(Hexagon bolts)

284

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700G-47704G705G

M

S SL

L

M

S

Setting bolt holes

Setting bolt holes


mm inch506580

100125150200250300350400450500600

22 1/2

3456810121416182024

JIS 10K ANSI 125Lb ANSI 150LbDIN NP10

BS 4504 PN10JIS 5K

8-M12×30×28 8-M12×35×33 8-M16×35×3316-M16×40×3816-M16×40×3816-M16×40×3816-M20×45×4124-M20×50×4624-M20×55×5124-M22×60×5032-M22×60×5032-M22×60×5040-M22×60×5040-M24×70×50

8-M16×35×33 8-M16×35×3316-M16×35×3316-M16×40×3816-M20×45×4116-M20×45×4124-M20×50×4624-M22×50×4632-M22×55×5132-M22×60×5032-M24×70×5040-M24×70×5040-M24×70×5048-M30×75×60

8-M16×35×338-M16×35×33

16-M16×40×3816-M16×40×3816-M16×40×3816-M20×45×4116-M20×50×4624-M20×55×5024-M20×55×5032-M20×60×4632-M24×70×5040-M24×70×5040-M24×70×5040-M27×80×60

8-U 5/8×35×308-U 5/8×40×308-U 5/8×40×38

16-U 5/8×45×3816-U 3/4×50×4416-U 3/4×50×4416-U 3/4×55×4424-U 7/8×60×5024-U 7/8×60×5024-U1 ×70×5732-U1 ×75×5732-U1･1/8×85×6340-U1･1/8×85×6340-U1･1/4×95×70

8-5/8-11UNC×388-5/8-11UNC×408-5/8-11UNC×45

16-5/8-11UNC×4516-3/4-10UNC×5016-3/4-10UNC×5016-3/4-10UNC×5524-7/8- 9UNC×6024-7/8- 9UNC×6024-1- 8UNC×7032-1- 8UNC×7032-1･1/8-8UN ×8040-1･1/8-8UN ×8040-1･1/4-8UN ×90

* Dimensions on the table show when the piping flange hole are tapped. For drilled holes, please consult us.

Remarks:1. The bolt lengths are in accordance with thickness of steel flanges.2. A unified screw should have 8 threads per inch if its nominal diameter exceeds 1 inch.3. The list is exclusively for standard material “SS400”.

Long bolts: 12 - M22 × 185 × 45


Example



(Hexagon bolts)

Long bolts and nuts


Nominal size


285

700G-47704G705G

M

S SL

L

M

S

Setting bolt holes

Setting bolt holes


mm inch506580

100125150200250300350400450500600

22 1/2

34568

10121416182024

JIS 10K ANSI 125Lb ANSI 150LbDIN NP10

BS 4504 PN10JIS 5K

8-M12×30×28 8-M12×35×33 8-M16×35×3316-M16×40×3816-M16×40×3816-M16×40×3816-M20×45×4124-M20×50×4624-M20×55×5124-M22×60×5032-M22×60×5032-M22×60×5040-M22×60×5040-M24×70×50

8-M16×35×33 8-M16×35×3316-M16×35×3316-M16×40×3816-M20×45×4116-M20×45×4124-M20×50×4624-M22×50×4632-M22×55×5132-M22×60×5032-M24×70×5040-M24×70×5040-M24×70×5048-M30×75×60

8-M16×35×338-M16×35×33

16-M16×40×3816-M16×40×3816-M16×40×3816-M20×45×4116-M20×50×4624-M20×55×5024-M20×55×5032-M20×60×4632-M24×70×5040-M24×70×5040-M24×70×5040-M27×80×60

8-U 5/8×35×308-U 5/8×40×308-U 5/8×40×38

16-U 5/8×45×3816-U 3/4×50×4416-U 3/4×50×4416-U 3/4×55×4424-U 7/8×60×5024-U 7/8×60×5024-U1 ×70×5732-U1 ×75×5732-U1･1/8×85×6340-U1･1/8×85×6340-U1･1/4×95×70

8-5/8-11UNC×388-5/8-11UNC×408-5/8-11UNC×45

16-5/8-11UNC×4516-3/4-10UNC×5016-3/4-10UNC×5016-3/4-10UNC×5524-7/8- 9UNC×6024-7/8- 9UNC×6024-1- 8UNC×7032-1- 8UNC×7032-1･1/8-8UN ×8040-1･1/8-8UN ×8040-1･1/4-8UN ×90

* Dimensions on the table show when the piping flange hole are tapped. For drilled holes, please consult us.

Remarks:1. The bolt lengths are in accordance with thickness of steel flanges.2. A unified screw should have 8 threads per inch if its nominal diameter exceeds 1 inch.3. The list is exclusively for standard material “SS400”.

Long bolts: 12 - M22 × 185 × 45


Example



(Hexagon bolts)

Long bolts and nuts


Nominal size


700G-48704G705G

M

S SL

L

M

S

Setting bolt holes

Setting bolt holes

Nominal size

Nominal size

■For Long Bolts and Nuts (Flange Bolt Hole: Tapped Holes)


mm inch50

65

80

100125150200250300350400450500600

2

2 1/2

3

456810121416182024

JIS10K JIS5K Setting Bolts

ANSI125Lb/150Lb

—

—

—

4-M16×130×304-M16×130×304-M16×140×354-M20×155×408-M20×165×408-M20×175×408-M22×185×45

12-M22×205×4512-M22×225×4516-M22×230×4516-M24×275×50

—

—

—

4-U5/8-11UNC×165×504-U3/4-10UNC×175×554-U3/4-10UNC×175×554-U3/4-10UNC×175×558-U7/8- 9UNC×215×558-U7/8- 9UNC×215×55

8-U1 - 8UNC×22512-U1 - 8UNC×255

12-U1 1/8- 8UN×28016-U1 1/8- 8UN×29516-U1 1/4- 8UN×340

—

—

4-M16×125×30

4-M16×130×304-M20×150×404-M20×155×408-M20×155×408-M22×175×45

12-M22×185×4512-M22×185×4512-M24×220×5016-M24×230×5016-M24×245×5020-M30×290×60

Setting BoltsSetting Bolts

8-U5/8-11UNC×35×30 8-U5/8-11UNC×40×30

(8-U5/8-11UNC×35×30)8-U5/8-11UNC×45×38

(8-U5/8-11UNC×40×30)8-U5/8-11UNC×45×38 8-U3/4-10UNC×50×44 8-U3/4-10UNC×50×44 8-U3/4-10UNC×55×44 8-U7/8- 9UNC×60×50 8-U7/8- 9UNC×60×50 8-U1 - 8UNC×70×57 8-U1 - 8UNC×75×57 8-U1 1/8-8UN×85×63 8-U1 1/8-8UN×85×63 8-U1 1/4-8UN×95×70

8-M12× 30×28

8-M12× 35×33

8-M16× 35×33

8-M16× 40×388-M16× 40×388-M16× 40×388-M20× 45×418-M20× 50×468-M20× 55×518-M22× 60×508-M22× 60×508-M22× 60×508-M22× 60×508-M24× 70×54

8-M16× 35×33

8-M16× 35×33

8-M16× 35×33

8-M16× 40×388-M20× 45×418-M20× 45×418-M20× 50×468-M22× 55×508-M22× 60×558-M22× 60×508-M24× 70×508-M24× 70×508-M24× 70×508-M30× 70×60

■For Hexagon Bolts and Nuts (Flange Bolt Hole: Tapped Holes)

mm inch506580

100125150200250300350400450500600

22 1/2

3456810121416182024

JIS 5K JIS 10K

— — —

4-M16×110×404-M16×110×404-M16×120×404-M20×130×508-M20×135×508-M20×150×508-M22×160×60

12-M22×175×4512-M22×185×4516-M22×205×4516-M24×230×50

— —

4-M16×110×404-M16×110×404-M20×120×504-M20×130×508-M20×135×508-M22×150×60

12-M22×160×6012-M22×160×4012-M24×190×4516-M24×205×4516-M24×215×4520-M30×255×50

8-M16× 35×328-M16× 35×328-M16× 35×328-M16× 40×388-M20× 45×418-M20× 45×418-M20× 50×468-M22× 55×508-M22× 60×558-M22× 60×508-M24× 70×508-M24× 70×508-M24× 70×508-M30× 70×60

8-M12× 30×288-M12× 35×338-M16× 35×338-M16× 40×388-M16× 40×388-M16× 40×388-M20× 45×418-M20× 50×468-M20× 55×518-M22× 60×508-M22× 60×508-M22× 60×508-M22× 60×508-M24× 70×54

Setting Bolts Setting BoltsHexagon Bolts and NutsHexagon Bolts and Nuts

Long Bolts and Nuts Long Bolts and Nuts Long Bolts and Nuts

Remarks:Bolt/Nut material: SS400/SS400, SUS304/SUS304The dimensions in parenthesis show ANSI125Lb. (for 65 mm and 80 mm)Heavy nut shall be used for ANSI125Lb/150Lb hexagon nuts.A unified screw should have 8 threads per inch if its nominal diameter exceeds 1 inch.

Long bolts and nuts


Long bolts: 12 - M22 × 185 × 45


Example



(Hexagon bolts)

286

ButterflyValve

TRITEC

TT2

334A

302A/303Q

304A/304Q

302Y/304Y

304M(HLV)

507V/508V

DTM

846T/847T/847Q

841T/842T

700Z

700G/704G/705G

700GB731P/732P/732Q/752W

71LG

700E/700K/700S

704G/722F/720F

KRV

227P

907H/908H(MKT)

903C

700 Series Rubber Seated Butterfly Valves for general use ... · 700 Series Rubber Seated Butterfly...

Documents

Transcript of 700 Series Rubber Seated Butterfly Valves for general use ... · 700 Series Rubber Seated Butterfly...