700 Series Dispensing Components Our 700 Series Premier dispensing components are silicone and chloride free and designed to work with industry

standard equipment. 700 Series dispensing components ensure accuracy, repeatability and productivity.

700 Series Syringe Barreis Unique ultra-low draft construction of inner diameter

yields high accuracy and stability. They are comprised

of industry compliant silicone and chloride free, low

friction polypropylene. Available in three different

colors: Natural for most generic applications, amber

provides protection of UV/visible light block (up to

520nm), but with the ability to see material inside the

barrel; and black for total light block. Sold in bulk and

packs of 50.

SIZE NATURAL AMBER BLACK

3 ce 7030LL 1N-1000 7030LL1D-1000 7030LL1B-1000

5 ce 7050LL 1 N-1000 7050LL1D-1000 7050LL1B-1000

10 ce 71 OOLL1N-1000 7100LL1D-1000 7100LL1B-1000

30 ce 7300LL1N-500 7300LL 1 D-500 7300LL1B-500

55 ce 7550LL 1 N-250 7550LL1D-250 7550LL 1 B-250

700 Series Air Powered Pistons Spread the pressure evenly across, using a pistan for

consistent dispensing of even high viscosity material.

Easy Flow pistons (blue) require less pressure to

dispense and prevent air from becoming entrapped

during the dispense process. Tight fit Wiper pistons

(white) provide a complete seal for low viscosity fluid.

Loase fit straight wall pistons (red) preven! stringing

and bouncing when dispensing high viscosity material.

Sold in bulk and packs of 50. Made from polyethylene.

SIZE Wlper Plston Stralght Wall Easy Flow

(White) Piston (Red) Piston (Blue)

3 ce 7030009W-1000 7030006R-1000 7030007BL-1000

5 ce 7050009W-1000 7050006R-1000 7050007BL-1000

10 ce 7100009W-1000 7100006R-1000 7100007BL-1000

30-55 ce 7300009W-1000 7300006R-1000 7300007BL-1000

700 Series Syringe Barrel Kits For your convenience these syringe barreis and white wiper

pistons are packaged together without pistons inserted. Kits with

Blue pistons are also available. Sold in bulk and packs of 50.

SYRINGE BARREL KITS WITH WHITE WIPER PISTONS

SIZE NATURAL AMBER BLACK

3 ce 7030LL 1NW-1000 7030LL 1DW-1000 7030LL 1 BW-1000

5 ce 7050LL 1NW-1000 7050LL 1DW-1000 7050LL 1BW-1000

10 ce 7100LL 1NW-1000 7100LL 1 DW-1000 7100LL1BW-1000

30 ce 7300LL 1 NW-500 7300LL 1 DW-500 7300LL 1 BW-500

55 ce 7550LL 1 NW-250 7550LL 1 DW-250 7550LL 1 BW-250

SYRINGE BARREL KITS WITH BLUE WIPER PISTONS

SIZE NATURAL

3 ce 7030LL 1NBL-1000

5 ce 7050LL 1NBL-1000

10 ce 7100LL 1NBL-1000

30 ce 7300LL 1 NBL-500

55 ce 7550LL 1 NBL-250

700 Series Syringe Barrel Dimensions CAPACITY Overall Length A Outside Diameter B

In ches/mm lnches/mm

3 ce 2.96/75.18 0.46/11.56

5 ce 2.83/71.9 0.59/14.99

10 ce 3.58/90.9 0.72/18.29

30 ce 4.66/118.36 0.99/25.15

55 ce 6.91/175.51 1.01/25.65

TB

A

pistons

Q syringe barreis

tips

700 Series Tip Cap Designed to seal the syringe barrel tip during

storage and shipment. Fits all syringe barrel

sizes. Sold in bulk and packs of 50. Made from

polypropylene.

Part No.

701SLL-1000

T E7015LB-1000

Description

Tip Cap Double Helix Thread Orange

Tip Cap Double Helix Thread Black

Stand up Tip Cap Designed for

easy attachment with large flat diameter at the

base to allow for the syringe barrel to stand

upright. Sold in bulk and packs of 50. Made from

Polypropylene.

Part No,

7015STC-1000

700 Series

Oescrlptlon

Blue Stand up Tip Cap

Receiver Head Assembly Receiver Head Assemblies are the connecting

link between time/pressure controllers and

syringe assemblies. These assemblies pro

vide a

safe connection for accident proof dispensing.

Available with 3 or 6 feet (0.9 - 1.8 meters) of

tubing. Consists of receiver head with Viton

0-ring, tubing and male quick connector. Sold

individually. Made of Delrin®.

SIZE 3' HOSE 6' HOSE NO HOSE (0.9m) (1.8m)

3cc 70303RHB 70306RHB 70300RHR

5cc 70503RHB 70506RHB 70500RHR

10 ce 71003RHB 71006RHB 71000RHR

30/55 ce 73003RHB 73006RHB 73000RHR

ln-Line Fluid Filter Attach the fluid filler to the receiver head to

preven! fluid from being pulled back from the

syringe barrel into the dispensar.

Part No.

881-000-000

TSDS00-11

Housing Material:

Filler Media:

Description

ln-line fluid filler kit

ln-line fluid filler only

Polypropylene

0.2um PTFE

Operating Pressure: 75 psi max.

Replacement 0-rings for Receiver Head Sold in packs of 10.

Receiver Head

SIZE EPR 0-RJNG VITON 0-RING

3cc P3015EPK P3019VPK

5cc P3016EPK P3020VPK

10 ce P3017EPK P3021VPK

30/55 ce P3018EPK P3022VPK

The Receiver Head is installed with Viton 0-ring.

700 Series End Caps Designed to seal large end of the syringe

barrel to ensure no contaminants come in

contact with material during storage and

shipmenl Standard color is blue. Made from

Polypropylene. Sold in bulk and packs of 50.

SIZE

3 ce

5 ce

10 ce

30/55 ce

ENDCAP

703000CB-1000

705000CB-1000

71OOOOCB-1000

730000CB-1000

TS700 Series Manual Syringe Gun Lightweight syringe barrel applicator gun provides

excellent control for medium/high viscosity

material. Easy to use. No dripping or mess.

SIZE MANUAL SYRINGE GUN

10 ce TS710SG

30 ce TS730SG

55 ce TS755SG

SIZE REPLAC EM ENT ROO

10 ce 71000R0D

30 ce 73000R0D

55 ce 75500R0D-C

Finger Switch Assembly

Use the Finger Switch with Techcon's

dispensers and syringes in place of a foot

pedal. Provides control at your finger tip.

Part No.

DX9010

Description

Finger Switc h Assembly

for TS Series Dispenser

TE Dispensing Tips The TE series consist of a stainless-steel cannula with a double helix polypropylene hub.

This premium line of dispensing tips is burr-free, and has an electro-polished cannula for unobstructed and consisten! material flow. In addition, they are silicone and chloride free. Sold in bulk and packs of 50.

1/4" 1/2" 1" 1-1/2"

Gauge (6.35mm) (12.7mm) (25.4mm) (38.1mm)

14 TE714050-1000 TE714100-1000 TE714150-1000

15 TE715050-1000 TE715100-1000 TE715150-1000

18 TE718025-1000 TE718050-1000 TE718100-1000 TE718150-1000

20 TE720025-1000 TE720050-1000 TE720100-1000 TE720150-1000

21 TE721025-1000 TE721050-1000 TE721100-1000 TE721150-1000

22 TE722025-1000 TE722050-1000 TE722100-1000 TE722150-1000

23 TE723025-1000 TE723050-1000 TE723100-1000 TE723150-1000

25 TE725025-1000 TE725050-1000

27 TE727025-1000 TE727050-1000

30 TE730025-1000 TE730050-1000

32 TE732025-1000

34 TE734025-1000

TE Bent Dispensing Tips Color Coding and Gauge These TE bent tips are precision bent at 45° and 90° For TE Series and TE Ben! Dispensing Tips. angles. Perfect for dispensing fluid in hard to reach places. Color Gauge I.D.(") I.D.(mm)Sold in packs of 50.

Olive • 14 0.063 1.600

1/2" (12.7mm) 1-1/2" (38.1 mm) Amber • 15 0.054 1.371 Gauge 90° 45° 45°

Green • 18 0.033 0.838 14 TE714050B90PK TE714050B45PK TE714150B45PK Pink • 20 0.024 0.610 15 TE715050B90PK TE715050B45PK

Purple • 21 0.020 0.508 18 TE718050B90PK TE718050B45PK TE718150B45PK

20 TE720050B90PK TE720050B45PK Blue • 22 0.016 0.406

21 TE721050B90PK TE721050B45PK TE721150B45PK Orange 23 0.013 0.330

22 TE722050B90PK TE722050B45PK Red • 25 0.010 0.254

23 TE723050B90PK TE723050B45PK aear 27 0.008 0.203 25 TE725050B90PK TE725050B45PK Lavender • 30 0.006 0.152 27 TE727050B90PK TE727050B45PK

Yellow 32 0.004 0.102 30 TE730050B90PK TE730050B45PK

Lime Green 34 0.0037 0.095

Teflon® Lined Tips Teflon® lined tips are ideal for use with low viscosity fluids and cyanoacrylates (super glue) material. Benefits of using this new tip include resist cyanoacrylate clogging and preven! damage to substrates.

Teflon® lined tips feature a double helix polypropylene color hub and a rigid Teflon® crimped lining that projects approximately 1/8" (3.17mm) from !he inside of a stainless steel tube. Sold in packs of 50.

Hub Color

Gray

Pink

1/2" (12.7mm)

TF720050PK

TF725050PK

1" (25.4mm)

TF720100PK

TF725100PK

Tlp ID Crimp ID

0.024" (0.61mm) 0.023"(0.58mm)

0.011" (0.28mm) 0.006"(0.15mm)

TT Dispensing Tips The tapered tip prevents blockage and increase the flow of high viscosity material. Standard tips

are molded in high density polyethylene with UV light block additive. Rigid tips are molded in polypropylene with opaque color. Sold in bulk and packs of 50.

Gauge Color Standard TT Tips Rigid TT Tips

14 Olive TT14-DHUV-1000 TT14-RIG1D-1000

16 Grey TT16-DHUV-1000 TT16-RIG1D-1000

18 Green TT18-DHUV-1000 TT18-RIG1D-1000

20 Pink TT20-DHUV-1000 TT20-RIG1D-1000

22 Blue TT22-DHUV-1000 TT22-RIG1D-1000

25 Red TT25-DHUV-1000 TT25-RIG1D-1000

27 Clear TT27-DHUV-1000 TT27-RIG1D-1000

TS-P Plastic Dispensing Tips Flexible tips allow access to hard to reach areas and allow you to "customize" the length. Ideal far CA applications. 1 112

" length. Sold in bulk and packs of 50. Made from polypropylene.

Gauge Color TS-P Dispensing Tips

15 Grey TS15P-1-1/2-500

16 Brown TS16P-1-1/2-500

18 Pink TS18P-1-1/2-500

20 Yellow TS20P-1-1/2-500

22 Black TS22P-1-1/2-500

25 Red TS25P-1-1/2-500

BT Series Use these double helix Brush Tips far "spread" applications such as glues and other materials.

Soft brush is made of Red Sable. Stiff brush is made of Nylon. Sold in packs of 12.

Gauge

16

Soft Bristle

BT16-S0FTPK

Stiff Bristle

BT16-STIFFPK

18 BT1B-S0FTPK BT18-ST1FFPK

22 BT22-S0FTPK BT22-ST1FFPK

Dispensing Tip Kit Decide far yourself which tip to use. This kit contains a variety of the most popular 700 Series tips to let you test different tips to find !he ones that fil your needs.

Part No.

TNOODKIT

Description

Dispensing l1p Kit

Manual Plungers and Pistons

for 700 Series Syringe Barreis The new manual syringe assemblies provide simple and quick

dispensing solutions without the need far compressed air. Molded

from Polypropylene resin, manual plungers are compatible with a

wide range of dispensing fluids. Pistons are made from thermoplastic

rubber and are available dry or with lubrication. Sold in packs of 50.

Part No.

7030004PPK

7030002MPK

7030002M-LUBPK

7050004PPK

7050002MPK

7050002M-LUBPK

7100004PPK

7100002MPK

7100002M-LUBPK

7300004PPK

7300002MPK

7300002M-LUBPK

Description

700 Manual Plunger, 3cc

700 Manual Pistan Rubber, 3cc

700 Manual Pistan Rubber, Lub, 3cc

700 Manual Plunger, 5cc

700 Manual Pistan Rubber, 5cc

700 Manual Pistan Rubber,Lub, 5cc

700 Manual Plunger, 10cc

700 Manual Pistan Rubber, 10cc

700 Manual Pistan Rubber, Lub, 10cc

700 Manual Plunger, 30cc

700 Manual Pistan Rubber, 30cc

700 Manual Pistan Rubber, Lub, 30cc See pages 4 and 5 far syringes and tip caps

400 Series Disposable Dispensing Components The 400 Series disposable syringes and components are available in a variety of styles to meet a wide range of applications.

Sold in bulk packages only.

Syringe Barreis Stoppers Barreis are molded from polypropylene. Rubber stoppers listed are not lubricated. For

Standard style is Luer lock. Luer slip and lubricated stoppers add -LUB to the part number.

taper tip styles are also available, Part No. Descñption

however minimum quantity, lead time 401L-2 1cc Rubber Stapper, Manual

and pricing considerations apply. In �403L-2 3cc Rubber Stapper, Manual

Natural color only (far black and amber 406L-2 6cc Rubber Stappar, Manual

410L-2 10cc Rubbar Stappar, Manual refer to page 4 ). 435L-2 35cc Rubbar Stappar, Manual

Part No. Description 403L-7 3cc Plastic Wipar Stappar, Manual

F401L-1 400 Syringa Barral 1cc Luar Slip 406L-7 6cc Plastic Wipar Stappar, Manual

403LL-1 400 Syringa Barral 3cc Luar Lack

E:;;J 410L-7 10cc Plastic Wipar Stappar, Manual

406LL-1 400 Syringa Barral 6cc Luar Lack 435L-7 35cc Plastic Wipar Stappar, Manual

410LL-1 400 Syringa Barral 10cc Luar Lack 401L-2 1cc Rubbar Stappar, Air Pawered

435LL-1 400 Syringe Barrel 35cc Luer Lack 403L-2 3cc Rubbar Stappar, Air Pawarad

460LL-1 400 Syringa Barral 60cc Luar Lack

CJ 406L-8 6cc Rubbar Stappar, Air Pawered

410L-8 10cc Rubber Stapper, Air Pawered

Plungers 435L-8 35cc Rubber Stapper, Air Pawered

Part No. Description 403L-9 3cc Plastic Wiper Stapper, Air Pawered 403L-4 3cc Plunger 406L-9 6cc Plastic Wiper Stapper, Air Pawered 406L-4 6cc Plunger

�410L-9 10cc Plastic Wiper Stapper, Air Pawered

410L-4 10cc Plu nger 435L-9 35cc Plastic Wipar Stappar, Air Pawarad 435L-4 35cc Plu nger 460L-9 60cc Plastic Wiper Stapper, Air Pawered 460L-4 60cc Plu nger

400 Series Disposable Dispensing Components The 400 Series disposable syringes and components are available in a variety of styles to meet a wide range of applications.

Sold in bulk packages only.

mTip Caps Part No. Description

15LL Luer Lock Tip Cap

15LL-B Black Luer Lock Tip Cap

Receiver Head Assemblies

D

The connecting link between time/pressure controllers and syringe

assemblies, Receiver Head Assemblies provide a safe connection

between receiver head and syringe barrel for accident proof dispensing.

Receiver Head Assemblies come with no tubing (-R), 3 feet of tubing (-3)

or 6 feet of tubing (-6).

400 Series Receiver Head Assemblies Part No. Size

900-250-3, -6 or -R 1cc

900-350-3, -6 or -R 3cc

900-550-3, -6 or -R 6cc

900-650-3, -6 or -R 10cc

900-950-3, -6 or -R 35cc

900-1150-3, -6 or-R 60cc

400 Series Manual Syringe Components Syringe barreis and plungers are molded from polypropylene; stoppers are molded from

polyethylene (-7) ar thermoplastic rubber (-2). Plunger locks to the stopper for smooth,

controlled manual dispensing. Use of a tip cap will seal the delivery end of the syringe

barrel when not dispensing.

Manual Syringes with Rubber Stoppers

Barreis and plungers are molded from polypropylene. Stoppers are molded from

thermoplastic rubber.

Size Syringe Stopper Plunger

3cc 403LL-1 403L-2 403L-4

6cc 406LL-1 406L-2 406L-4

10cc 410LL-1 410L-2 410L-4

35cc 435LL-1 435L-2 435L-4

Manual Syringes with Plastic Stoppers

Barreis and plungers are molded from polypropylene. Stoppers are molded from

polyethylene for better chemical compatibility.

Size Syringe Stopper Plunger

3cc 403LL-1 403L-7 403L-4

6cc 406LL-1 406L-7 406L-4

10cc 410LL-1 410L-7 410L-4

35cc 435LL-1 435L-7 435L-4

End Caps Part No. Description

TS5 6cc End Cap

TS7 10cc End Cap

STOPPER

TS Series Dispensing Tips The TS Series Dispensing Tips offer a

variety of dispensing performance and

flexibility options. Stainless steel

tubing is cut to precise lengths and

ground to be burr-free. Cut tubing is

crimped into aluminum locking insert,

then molded into polyethylene hubs.

Molded hub colors correspond to

gauge size. Ali TS Series tips secure

to Techcon Systems syringe barreis

and correspond to the Luer lock

specification.

Part Number lnternational Gauge I.D. I.D.

Hub Color (inches) (mm)

TS18-1/2-1000 - Pink 18 0.033 0.838 TS18-1-1000 - Pink 18 0.033 0.838 TS19-1/2-1000 - Brown 19 0.028 0.711 TS19-1-1000 - Brown 19 0.028 0.711 TS20-1/2-1000 Yellow 20 0.024 0.609 TS20-1-1000 Yellow 20 0.024 0.609 TS21-1/2-1000 - Green 21 0.020 0.508 TS22-1/2-1000 - Black 22 0.016 0.406 TS22-1-1000 - Black 22 0.016 0.406 TS23•1/4-1000 - Blue 23 0.013 0.330 TS23-1/2·1000 - Blue 23 0.013 0.330 TS25-1/2-1000 - Blue 25 0.010 0.254 TS27-1/4-1000 Grey 27 0.008 0.203 TS30-1/4-1000 - Lavender 30 0.006 0.152 TS30-S/16-1000 - Lavender 30 0.006 0.152 TS30-1/2·1000 - Lavender 30 0.006 0.152

TS-M Metal Dispensing Tips This series consists of a stainless steel cannula and aluminium hub. Sold in bulk quantity of 500.

Part Number Gauge Length Length

(inches) (mm)

TS14-1/2M-500 14 0.5 12.7 TS14-1 M-500 14 1.0 25.4 TS14-2M-500 14 2.0 50.8 TS15-1/2M-500 15 0.5 12.7 TS15-1 M-500 15 1.0 25.4 TS15-1-1/2M-500 15 1.5 38.1 TS16-1 M-500 16 1.0 25.4

Length Length

(inches) (mm)

0.5 12.7 1.0 25.4 0.5 12.7 1.0 25.4 0.5 12.7 1.0 25.4 0.5 12.7 0.5 12.7 1.0 25.4 0.25 6.35 0.5 12.7 0.5 12.7 0.25 6.35 0.25 6.35 0.31 7.94 0.5 12.7

.... .------......... SingleThread

1 '

........ LuerlockMolded Hub

�� ........

Lockinglnsert

........ Stainless SteelCannula

TS-SS Metal Dispensing Tips High precision and tolerance for use in automated applications. With stainless steel cannula and nickel plated brass hub. Length of 1/2" (12.7mm). Sold in packs of 12.

Part Number Gauge I.D. (inches) I.D.(mm)

TS12SS-1/2PK 12 0.087 2.21 TS13SS-1/2PK 13 0.077 1.95TS14SS-1/2PK 14 0.061 1.54 TS15SS-1/2PK 15 0.056 1.43TS16SS-1/2PK 16 0.048 1.22 TS17SS-1/2PK 17 0.044 1.11TS18SS-1/2PK 18 0.033 0.83TS19SS-1/2PK 19 0.028 0.72TS20SS-1/2PK 20 0.024 0.62 TS21SS-1/2PK 21 0.021 0.54TS22SS-1/2PK 22 0.017 0.42TS23SS-1/2PK 23 0.013 0.34TS25SS•1/2PK 25 0.011 0.27 TS26SS-1/2PK 26 0.010 0.25TS27SS-1/2PK 27 0.008 0.21TS28SS•1/2PK 28 0.007 0.17

MT Series Dispensing Tips The MT Series precision metal

tapered tips deliver the best in high

fluid flow rates, which are ideal for

high speed dispensing, at a fraction of

the cost of comparable precision tips,

in the market. The smooth interna!

conical fluid flow path increases

performance, reduces clogging and

back pressure allowing for higher flow

rates.

The Phosphor-Bronze metal construction, with Electroless Nickel, plating

makes the MT Series ideal for use in robotic applications or whenever

precision counts. The thin walled design at the tip enhances dispensing

accuracy while at the same time reduces fluid tailing and stringing.

Available from 18 to 30 gauge, the MT Series tips are color coded for

easy identification. Sold individually.

Part Number Hub Color Gauge I.D. I.D. OD

(mm) ( inches) (mm)

MT18-PBN • Pink 18 1.019 0.040 1.260

MT19-PBN • Orange 19 0.839 0.033 1.079

MT20-PBN • Green 20 0.661 0.026 0.899

MT21-PBN • Blue 21 0.590 0.023 0.830

MT23·PBN • Purple 23 0.544 0.021 0.655

MT25-PBN D White 25 0.417 0.016 0.528

MT27-PBN • Red 27 0.315 0.012 0.426

MTJO-PBN • Black 30 0.214 0.008 0.325

Key Features:

• Smooth interna! fluid path:

- Reduces turbulent fluid flow

- Reduces back pressure

- lncreases fluid flow rates.

- Reduces air entrapment and fluid dripping

Metal construction:

- Provides accurate positioning

- Ideal for automatic dispensing applications

• Thin walls - Reduces fluid tailing and stringing

• Clog resistant - ideal for filled fluids

OD

( inches)

0.050

,��½ 0.042 . j 0.039"

0.035 1mm

0.033

0.026

0.021

0.017

0.013

11