70-412qa71 formatted - GRATIS EXAM · 2012-11-20 · Exam A QUESTION 1 You have a DHCP server named...

70-412qa71_formatted

Number: 000-000Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

MICROSOFT

EXAM 70-412

Prepare for Microsoft Configuring Advanced Windows

Server 2012 ServicesTotal Questions:http://www.test4prep.com/70-412.htmlFor More Information:

Get Complete Collection of 70-412 Exam's Question and Answers.http://www.Test4Prep.com

Exam A

QUESTION 1You have a DHCP server named Server1. Server1 has one network adapter. Server1 is located on a subnetnamed Subnet1. Server1 has scope named Scope1. Scope1 contains IP addresses for the 192.168.1.0/24network. Your company is migrating the IP addresses on Subnet1 to use a network ID of 10.10.0.0/16. OnServer11 you create a scope named Scope2. Scope2 contains IP addresses for the 10.10.0.0/16 network. Youneed to ensure that clients on Subnet1 can receive IP addresses from either scope. What should you create onServer1?

A. A multicast scopeB. A scopeC. A superscopeD. A split-scope

Correct Answer: CSection: (none)Explanation

Explanation/Reference:

QUESTION 2Your network contains an Active Directory domain named adatum.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. On Dc1, you open DNS Manager as shown in theexhibit. (Click the Exhibit button.)

You need to change the zone type of the contoso.com zone from an Active Directory-integrated zone to astandard primary zone. What should you do before you change the zone type?

A. Unsign the zone.B. Modify the Zone Signing Key (ZSK).C. Modify the Key Signing Key (KSK).D. Change the Key Master.

Correct Answer: ASection: (none)Explanation


QUESTION 3You have a server named Server1 that runs Windows Server 2012. Server1 has the DNS Server server roleinstalled. You need to configure Server1 to resolve queries for single-label DNS names. Which two actionsshould you perform? (Each correct answer presents part of the solution. Choose two.)

A. Run the Set-DNSServerGlobalNameZone cmdlet.B. Modify the DNS suffix search list setting.C. Modify the Primary DNS Suffix Devolution setting.D. Create a zone named ".".E. Create a zone named GlobalNames.F. Run the Set-DNSServerRootHint cmdlet.

Correct Answer: BDSection: (none)Explanation


QUESTION 4Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 has the IP Address Management (IPAM)Server feature installed. Server2 has the DHCP Server server role installed. A user named User1 is a memberof the IPAM Users group on Server1. You need to ensure that User1 can use IPAM to modify the DHCP scopeson Server2. The solution must minimize the number of permissions assigned to User1. To which group shouldyou add User1?

A. DHCP Administrators on Server2B. IPAM ASM Administrators on Server1C. IPAMUG in Active DirectoryD. IPAM MSM Administrators on Server1



QUESTION 5You have a server named DC2 that runs Windows Server 2012. DC2 contains a DNS zone namedadatum.com. The adatum.com zone is shown in the exhibit. (Click the Exhibit button.)

You need to configure DNS clients to perform DNSSEC validation for the adatum.com DNS domain.What should you configure?

A. The Network Location settingsB. A Name Resolution PolicyC. The DNS Client settingsD. The Network Connection settings

Correct Answer: BSection: (none)Explanation


QUESTION 6Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2 that run Windows Server 2012. Server1 has the DHCP Server server roleinstalled. Server2 has the Hyper-V server role installed. Server2 has an IP address of 192.168.10.50.Server1 has a scope named Scope1 for the 192.168.10.0/24 network. You plan to deploy 20 virtual machineson Server2 that will be connected to the external network. The MAC addresses for the virtual machines willbegin with 00-15-SD-83-03. You need to configure Server1 to offer the virtual machines IP addresses from192.168.10.200 to 192.168.10.21g. Physical computers on the network must be offered IP addresses outsidethis range. You want to achieve this goal by using the minimum amount of administrative effort. What shouldyou do from the DHCP console?


A. Create reservations.B. Create a policy.C. Delete Scope1 and create two new scopes.D. Configure Allow filters and Deny filters.



QUESTION 7Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the IP Address Management (IPAM) Server feature installed.You have a support technician named Tech1. Tech1 is a member of the IPAM Administrators group on Server1and Server2. You need to ensure that Tech 1 can use Server Manager on Server1 to manage IPAM onServer2. To which group on Server2 should you add Tech1.

A. Remote Management UsersB. IPAM MSM AdministratorsC. IPAM AdministratorsD. WinRM Remote WM1 Users

Correct Answer: DSection: (none)Explanation


QUESTION 8Your network contains two Active Directory forests named contoso.com and adatum.com. All of the domaincontrollers in both of the forests run Windows Server 2012. The adatum.com domain contains a file servernamed Servers. Adatum.com has a one-way forest trust to contoso.com. A contoso.com user name User10attempts to access a shared folder on Servers and receives the error message shown in the exhibit. (Click theExhibit button.)

You verify that the Authenticated Users group has Read permissions to the Data folder. You need to ensurethat User10 can read the contents of the Data folder on Server5 in the adatum.com domain.What should you do?

A. Grant the Other Organization group Read permissions to the Data folder.B. Modify the list of logon workstations of the contoso\User10 user account.C. Enable the Netlogon Service (NP-In) firewall rule on Servers.D. Modify the permissions on the Servers computer object in Active Directory.



QUESTION 9HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two ActiveDirectory sites named Site1 and Site2. You discover that when the account of a user in Site1 is locked out, theuser can still log on to the servers in Site2 for up to 15 minutes by using Remote Desktop Services (RDS). Youneed to reduce the amount of time it takes to synchronize account lockout information across the domain.Which attribute should you modify? To answer, select the appropriate attribute in the answer area.

A.B.C.D.

Correct Answer: Section: (none)Explanation


QUESTION 10Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. You have a domain outside the forestnamed adatum.com. You need to configure an access solution to meet the following requirements:· Users in adatum.com must be able to access resources in contoso.com. · Users in adatum.com must beprevented from accessing resources in fabrikam.com. · Users in both contoso.com and fabrikam.com must beprevented from accessing resources in adatum.com.What should you create?

A. A one-way external trust from contoso.com to adatum.comB. A one-way realm trust from adatum.com to contoso.comC. A one-way realm trust from contoso.com to adatum.comD. A one-way external trust from adatum.com to contoso.com



QUESTION 11Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication. Which tool should you use?

A. Active Directory Sites and ServicesB. NtdsutilC. DNS ManagerD. Active Directory Domains and Trusts



QUESTION 12Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The functional level of the forest is Windows Server 2003. The contoso.com domain containsdomain controllers that run either Windows Server 2008 or Windows Server 2008 R2. The functional level ofthe domain is Windows Server 2008. The fabrikam.com domain contains domain controllers that run eitherWindows Server 2003 or Windows Server 2008. The functional level of the domain is Windows Server 2003.The contoso.com domain contains a member server named Server1 that runs Windows Server 2012. Youinstall the Active Directory Domain Services server role on Server1. You need to add Server1 as a new domaincontroller in the contoso.com domain. What should you do?

A. Run the Active Directory Domain Services Configuration Wizard.B. Run adprep.exe /domainprep, and then run dcpromo.exe.C. Raise the functional level of the forest, and then run dcprorno.exe.D. Modify the Computer Name/Domain Changes properties.

Correct Answer: ASection: (none)

Explanation


QUESTION 13Your network contains an Active Directory forest. The forest contains two domains named contoso.com andfabrikam.com. The forest functional level is Windows 2000. The contoso.com domain contains domaincontrollers that run either Windows Server 2008 or Windows Server 2008 R2. The domain functional level isWindows Server 2008. The fabrikam.com domain contains domain controllers that run either Windows 2000Server or Windows Server 2003. The domain functional level is Windows 2000 native. The contoso.comdomain contains a member server named Server1 that runs Windows Server 2012. You need to add Server1as a new domain controller in the contoso.com domain. What should you do first?

A. Raise the functional level of the contoso.com domain to Windows Server 2008 R2.B. Upgrade the domain controllers that run Windows Server 2008 to Windows Server 2008 R2.C. Raise the functional level of the fabrikam.com domain to Windows Server 2003.D. Decommission the domain controllers that run Windows 2000.E. Raise the forest functional level to Windows Server 2003.



QUESTION 14Your network contains an Active Directory domain named adatum.com. The domain contains two domaincontrollers that run Windows Server 2012. The domain controllers are configured as shown in the followingtable.

You log on to DC1 by using a user account that is a member of the Domain Admins group, and then you createa new user account named User1. You need to prepopulate the password for User1 on DC2. What should youdo first?

A. Connect to DC2 from Active Directory Users and Computers.B. Add DC2 to the Allowed RODC Password Replication Policy group.C. Add the User1 account to the Allowed RODC Password Replication Policy group.D. Run Active Directory Users and Computers as a member of the Enterprise Admins group.



QUESTION 15Your company has offices in Montreal, New York, and Amsterdam. The network contains an Active Directoryforest named contoso.com. An Active Directory site exists for each office. All of the sites connect to each other

by using the DEFAULTIPSITELINK site link. You need to ensure that only between 20:00 and 08:00, thedomain controllers in the Montreal office replicate the Active Directory changes to the domain controllers in theAmsterdam office. The solution must ensure that the domain controllers in the Montreal and the New Yorkoffices can replicate the Active Directory changes any time of day. What should you do?

A. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITELINK. Modify the schedule of DEFAULTIPSITELINK.

B. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.Modify the schedule of DEFAU LTIPSITELINK.

C. Create a new site link that contains Montreal and Amsterdam. Remove Amsterdam fromDEFAULTIPSITELINK. Modify the schedule of the new site link.

D. Create a new site link that contains Montreal and Amsterdam. Create a new site link bridge.Modify the schedule of the new site link.



QUESTION 16Your network contains two Active Directory forests named contoso.com and adatum.com. A two- way foresttrust exists between the forests. The contoso.com forest contains an enterprise certification authority (CA)named Server1. You implement cross-forest certificate enrollment between the contoso.com forest and theadatum.com forest. On Server1, you create a new certificate template named Template1. You need to ensurethat users in the adatum.com forest can request certificates that are based on Template1. Which tool shouldyou use?

A. DumpADO.ps1B. RepadminC. Add-CATemplateD. CertutilE. PKISync.ps1

Correct Answer: ESection: (none)Explanation


QUESTION 17Your network contains an Active Directory domain named adatum.com. The domain contains four servers. Theservers are configured as shown in the following table.

You plan to deploy an enterprise certification authority (CA) on a server named Server5. Server5 will be used toissue certificates to domain-joined computers and workgroup computers. You need to identify which server youmust use as the certificate revocation list (CRL) distribution point for Server5. Which server should you identify?

A. Server3B. Server2C. Server4D. Server 1



QUESTION 18You have a server named Server1 that has the Active Directory Certificate Services server role installed.Server1 uses a hardware security module (HSM) to protect the private key of Server1. You need to ensure thatthe Active Directory Certificate Services (AD CS) database, log files, and private key are backed up. Youperform regular backups of the HSM module by using a backup utility provided by the HSM manufacturer. Whatelse should you do?

A. Run the certutil.exe command and specify the -backupkey parameter.B. Run the certutil.exe command and specify the -backupdb parameter.C. Run the certutil.exe command and specify the -backup parameter.D. Run the certutil.exe command and specify the -dump parameter.



QUESTION 19HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Federation Services (AD FS) serverrole installed. Adatum.com is a partner organization. You are helping the administrator of adatum.com set up afederated trust between adatum.com and contoso.com. The administrator of adatum.com asks you to provide afile containing the federation metadata of contoso.com. You need to identify the location of the federationmetadata file. Which node in the AD FS console should you select?To answer, select the appropriate node in the answer area.

A.B.C.D.



QUESTION 20Your network contains three Active Directory forests. Each forest contains an Active Directory RightsManagement Services (AD RMS) root cluster. All of the users in all of the forests must be able to accessprotected content from any of the forests. You need to identify the minimum number of AD RMS trusts required.How many trusts should you identify?

A. 2B. 3C. 4D. 6



QUESTION 21Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012.The domain contains a domain controller named DC1 that is configured as an enterprise root certificationauthority (CA). All users in the domain are issued a smart card and are required to log on to their domain-joinedclient computer by using their smart card. A user named User1 resigned and started to work for a competingcompany. You need to prevent User1 immediately from logging on to any computer in the domain. The solutionmust not prevent other users from logging on to the domain. Which tool should you use?

A. Active Directory Sites and ServicesB. Active Directory Administrative CenterC. Server ManagerD. Certificate Templates



QUESTION 22Your network contains a server named Server1 that runs Windows Server 2012. Server1 has the Hyper-Vserver role installed. Server1 hosts 10 virtual machines that run Windows Server 2012. You add a new servernamed Server2. Server2 has faster hard disk drives, more RAM, and a different processor manufacturer thanServer1. You need to move all of the virtual machines from Server1 to Server2. The solution must minimizedowntime. What should you do for each virtual machine?

A. Perform a quick migration.B. Perform a storage migration.C. Export the virtual machines from Server1 and import the virtual machines to Server2.D. Perform a live migration.



QUESTION 23You have a datacenter that contains six servers. Each server has the Hyper-V server role installed and runsWindows Server 2012. The servers are configured as shown in the following table.

Host4 and Host5 are part of a cluster named Cluster1. Cluster1 hosts a virtual machine named VM1. You needto move VM1 to another Hyper-V host. The solution must minimize the downtime of VM1. To which server andby which method should you move VM1?

A. To Host3 by using a storage migrationB. To Host6 by using a storage migrationC. To Host2 by using a live migrationD. To Host1 by using a quick migration



QUESTION 24Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.Cluster1 hosts an application named App1. You need to ensure that Server2 handles all of the client requeststo the cluster for App1. The solution must ensure that if Server2 fails, Server1 becomes the active node forAppl. What should you configure?

A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. the Scale-Out File Server

Correct Answer: JSection: (none)Explanation


QUESTION 25Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.What should you configure?




QUESTION 26Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You configure File Services and DHCP as clustered resources for Cluster1. Server1 is the active node for bothclustered resources. You need to ensure that if two consecutive heartbeat messages are missed betweenServer1 and Server2, Server2 will begin responding to DHCP requests. The solution must ensure that Server1remains the active node for the File Services clustered resource for up to five missed heartbeat messages.What should you configure?




QUESTION 27Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You have a folder named Folder1 on Server1 that containsapplication data. You plan to provide continuously available access to Folder1. You need to ensure that all ofthe nodes in Cluster1 can actively respond to the client requests for Folder1. What should you configure?


Correct Answer: L

Section: (none)Explanation


QUESTION 28Information and details provided in a question apply only to that question. Your network contains an ActiveDirectory domain named contoso.com. The domain contains two member servers named Server1 and Server2.All servers run Windows Server 2012. Server1 and Server2 have the Network Load Balancing (NLB) featureinstalled. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure webapplication named WebApp1. WebApp1 saves user state information locally on each node. You need to ensurethat when users connect to WebApp1, their session state is maintained. What should you configure?




QUESTION 29Your company has a main office and a branch office. The main office contains a file server named Server1.Server1 has the BranchCache for Network Files role service installed. The branch office contains a servernamed Server2. Server2 is configured as a BranchCache hosted cache server. You need to preload the datafrom the file shares on Server1 to the cache on Server2. You generate hashes for the file shares on Server1.Which cmdlet should you run next?

A. Add-BCDataCacheExtensionB. Set-BCCacheC. Publish-BCFileContentD. Export-BCCachePackage



QUESTION 30HOTSPOT

Your company has a main office and a branch office. The main office is located in Detroit. The branch office islocated in Seattle. The network contains an Active Directory domain named adatum.com. Client computers runeither Windows 7 Enterprise or Windows 8 Enterprise. The main office contains 1,000 client computers and 50servers. The branch office contains 20 client computers. All computer accounts for the branch office arelocated in an organizational unit (OU) named SeattleComputers. A Group Policy object (GPO) named GPO1 islinked to the SeattleComputers OU. You need to configure BranchCache for the branch office.

A.B.C.D.



QUESTION 31DRAG DROP

Your network contains an Active Directory domain named contoso.com. All file servers in the domain runWindows Server 2012. The computer accounts of the file servers are in an organizational unit (OU) namedOU1. A Group Policy object (GPO) named GPO1 is linked to OU1. You plan to modify the NTFS permissionsfor many folders on the file servers by using central access policies. You need to identify any users who will bedenied access to resources that they can currently access once the new permissions are implemented. Inwhich order should you Perform the five actions?

A.B.C.D.



QUESTION 32You have a file server named Server1 that runs Windows Server 2012. Data Deduplication is enabled on driveD of Server1. You need to exclude D:\Folder1 from Data Deduplication. What should you configure?

A. Disk Management in Computer ManagementB. File and Storage Services in Server ManagerC. the classification rules in File Server Resource Manager (FSRM)D. the properties of D:\Folder1



QUESTION 33You manage an environment that has many servers. The servers run Windows Server 2012 and use iSCSIstorage. Administrators report that it is difficult to locate available iSCSI resources on the network. You need toensure that the administrators can locate iSCSI resources on the network by using a central repository. Whichfeature should you deploy?

A. The iSCSI Target Server role serviceB. The iSNS Server service featureC. The Windows Standards-Based Storage Management featureD. The iSCSI Target Storage Provider feature



QUESTION 34Your network contains an Active Directory domain named contoso.com. The network contains a file servernamed Server1 that runs Windows Server 2012. You create a folder named Folder1. You share Folder1 asShare1. The NTFS permissions on Folder1 are shown in the Folder1 exhibit. (Click the Exhibit button.)


The Everyone group has the Full control Share permission to Folder1. You configure a central access policy asshown in the Central Access Policy exhibit. (Click the Exhibit button.)

Members of the IT group report that they cannot modify the files in Folder1. You need to ensure that the ITgroup members can modify the files in Folder1. The solution must use central access policies to control thepermissions. Which two actions should you perform? (Each correct answer presents part of the solution.Choose two.)

A. On the Classification tab of Folder1, set the classification to Information Technology.B. On the Security tab of Folder1, add a conditional expression to the existing permission entry for the IT

group.C. On Share 1, assign the Change Share permission to the IT group.D. On the Security tab of Folder1, remove the permission entry for the IT group.E. On the Security tab of Folder1, assign the Modify permission to the Authenticated Users group.

Correct Answer: BESection: (none)Explanation


QUESTION 35You have a server named File1 that runs Windows Server 2012. Fuel has the File Server role service installed.You plan to back up all shared folders by using Microsoft Online Backup. You download and install theMicrosoft Online Backup Service Agent on File1. You need to ensure that you use Windows Server Backup toback up data to Microsoft Online Backup. What should you do?

A. From Computer Management, add the File1 computer account to the Backup Operators group.B. From Windows Server Backup, run the Register Server Wizard.C. From a command prompt, run wbadmin.exe enable backup.D. From the Services console, modify the Log On settings of the Microsoft Online Backup Service Agent.



QUESTION 36Your network contains an Active Directory domain named contoso.com. You are creating a custom WindowsRecovery Environment (Windows RE) image. You need to ensure that when a server starts from the customWindows RE image, a drive is mapped automatically to a network share. What should you modify in the image?

A. startnet.cmdB. Xsl-mApp1ngs.xmlC. Win.iniD. smb.types.ps1xml



QUESTION 37You have a file server named Server1 that runs a Server Core Installation of Windows Server 2012. You needto ensure that users can access previous versions of files that are shared on Server1 by using the PreviousVersions tab. Which tool should you use?

A. DiskpartB. WbadminC. VssadminD. Storrept



QUESTION 38You have a server named Server1 that runs Windows Server 2012. Server1 has the Windows DeploymentServices server role installed. You back up Server1 each day by using Windows Server Backup. The disk arrayon Server1 fails. You replace the disk array. You need to restore Server1 as quickly as possible. What shouldyou do?

A. Start Server1 from the Windows Server 2012 installation media.B. Start Server1and press F8.C. Start Server1 and press Shift+F8.D. Start Server1 by using the PXE.



QUESTION 39Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servershave the Hyper-V server role installed. Server1 and Server2 are located in different offices. The offices connectto each other by using a high-latency WAN link. Server2 hosts a virtual machine named VM1. You need toensure that you can start VM1 on Server1 if Server2 fails. The solution must minimize hardware costs. Whatshould you do?

A. On Server1, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.B. From the Hyper-V Settings of Server2, modify the Replication Configuration settings. Enable replication for

VM1.C. On Server2, install the Multipath I/O (MPIO) feature. Modify the storage location of the VHDs for VM1.D. From the Hyper-V Settings of Server1, modify the Replication Configuration settings. Enable replication for

VM1.



QUESTION 40You have a server named Server1 that runs Windows Server 2012. You modify the properties of a systemdriver and you restart Server1. You discover that Server1 continuously restarts without starting Windows Server2012. You need to start Windows Server 2012 on Server1 in the least amount of time. The solution mustminimize the amount of data loss. Which Advanced Boot Option should you select?

A. Last Know Good Configuration (advanced)B. Repair Your ComputerC. Disable automatic restart on system failureD. Disable Driver Signature Enforcement


Explanation


QUESTION 41Your network contains an Active Directory domain named contoso.com. The domain contains three serversnamed Server1, Server2, and Server3 that run Windows Server 2012. All three servers have the Hyper-Vserver role installed and the Failover Clustering feature installed. Server1 and Server2 are nodes in a failovercluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-VReplica Broker role installed. The Hyper-V Replica Broker currently runs on Server1. Server3 currently has novirtual machines. You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replicaserver for Cluster1. Which two tools should you use? (Each correct answer presents part of the solution.Choose two.)

A. The Hyper-V Manager console connected to Server3B. The Failover Cluster Manager console connected to Server3C. The Hyper-V Manager console connected to Server1.D. The Failover Cluster Manager console connected to Cluster1E. The Hyper-V Manager console connected to Server2

Correct Answer: AESection: (none)Explanation


QUESTION 42DRAG DROPYou have a file server named Server1 that runs Windows Server 2012. The folders on Server1 are configuredas shown in the following table.

A new corporate policy states that backups must use Microsoft Online Backup whenever possible. You need toidentify which technology you must use to back up Server1. The solution must use Microsoft Online Backupwhenever. What should you identify? To answer, drag the appropriate backup type to the correct location orlocations. Each backup type may be used once, more than once, or not at all. You may need to drag the splitbar between panes or scroll to view content.

A.B.C.D.



QUESTION 43You have a DNS server named Server1 that runs Windows Server 2012. Server1 has a signed zone forcontoso.com. You need to configure DNS clients to perform DNSSEC validation for the contoso.com DNSdomain. What should you configure?

A. The Network Connection settingsB. A Name Resolution PolicyC. The Network Location settingsD. The DNS Client settings



QUESTION 44Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 that runs Windows Server 2012. On Dc1, you open DNS Manager as shown in theexhibit. (Click the Exhibit button.)

You need to change the replication scope of the contoso.com zone. What should you do before you change thereplication scope?

A. Modify the Zone Transfers settings.B. Add DC1 to the Name Servers list.C. Add your user account to the Security settings of the zone.D. Unsign the zone.



QUESTION 45Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM)Server feature installed. On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports forIPAM. On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)

You need to ensure that you can use IPAM on Server1 to manage DNS on DC1. What should you do?

A. Modify the outbound firewall rules on Server1.B. Modify the inbound firewall rules on Server1.C. Add Server1 to the Remote Management Users group.D. Add Server1 to the Event Log Readers group.



QUESTION 46Your network contains an Active Directory domain named contoso.com. The domain contains servers namedServer1 and Server2 that run Windows Server 2012. Server1 has the IP Address Management (IPAM) Serverfeature installed. You install the IPAM client on Server2. You open Server Manager on Server2 as shown in theexhibit. (Click the Exhibit button.)

You need to manage IPAM from Server2. What should you do first?

A. On Server1, add the Server2 computer account to the IPAM MSM Administrators group.B. On Server2, open Computer Management and connect to Server1.C. On Server2, add Server1 to Server Manager.D. On Server1, add the Server2 computer account to the IPAM ASM Administrators group.



QUESTION 47

Your network contains an Active Directory domain named contoso.com. The domain contains a domaincontroller named Dc1. DC1 has the DNS Server server role installed. The network has two sites named Site1and Site2. Site1 uses 10.10.0.0/16 IP addresses and Site2 uses 10.11.0.0/16 IP addresses. All computers useDC1 as their DNS server. The domain contains four servers named Server1, Server2, Server3, and Server4. Allof the servers run a service named Service1. DNS host records are configured as shown in the exhibit. (Clickthe Exhibit button.)

You discover that computers from the 10.10.1.0/24 network always resolve Service1 to the [P address ofServer1. You need to configure DNS on DC1 to distribute computers in Site1 between Server1 and Server2when the computers attempt to resolve Service1. What should run on DC1?

A. dnscmd /config /bindsecondaries 1B. dnscmd /config /localnetpriority 0C. dnscmd /config /localnetprioritynetmask 0x0000ffffD. dnscmd /config /roundrobin 0



QUESTION 48Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. The domain contains two servers named Server1and Server2 that run Windows Server 2012. Both servers have the DHCP Server server role installed. Server1is located in the main office site. Server2 is located in the branch office site. Server1 provides IPv4 addressesto the client computers in the main office site. Server2 provides IPv4 addresses to the client computers in thebranch office site. You need to ensure that if either Server1 or Server2 are offline, the client computers can still

obtain IPv4 addresses. The solution must meet the following requirements:· The storage location of the DHCP databases must not be a single point of failure. · Server1 must provide IPv4addresses to the client computers in the branch office site only if Server2 is offline.· Server2 must provide IPv4 addresses to the client computers in the main office site only if Server1 is offline.Which configuration should you use?

A. load sharing mode failover partnersB. a failover clusterC. hot standby mode failover partnersD. a Network Load Balancing (NLB) cluster



QUESTION 49You have a DHCP server named Server1. Server1 has an IP address 192.168.1.2 is located on a subnet thathas a network ID of 192.168.1.0/24. On Server1, you create the scopes shown in the following table.

You need to ensure that Server1 can assign IP addresses from both scopes to the DHCP clients on the localsubnet. What should you create on Server1?

A. A scopeB. A superscopeC. A split-scopeD. A multicast scope



QUESTION 50Your network contains servers that run Windows Server 2012. The network contains a large number of iSCSIstorage locations and iSCSI clients. You need to deploy a central repository that can discover and list SCSIresources on the network automatically. Which feature should you deploy?

A. the Windows Standards-Based Storage Management featureB. the iSCSI Target Server role serviceC. the iSCSI Target Storage Provider featureD. the iSNS Server service feature


Explanation


QUESTION 51DRAG DROPYour network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1. All servers run Windows Server 2012. All domain user accounts have the Division attributeautomatically populated as part of the user provisioning process. The Support for Dynamic Access Control andKerberos armoring policy is enabled for the domain. You need to control access to the file shares on Server1based on the values in the Division attribute and the Division resource property. Which three actions should youperform in sequence?

A.B.C.D.



QUESTION 52You have a file server named FS1 that runs Windows Server 8. Data Deduplication is enabled on FS1. Youneed to configure Data Deduplication to run at a normal priority from 20:00 to 06:00 daily. What should youconfigure?

A. File and Storage Services in Server ManagerB. The Data Deduplication process in Task ManagerC. Disk Management in Computer ManagementD. The properties of drive C



QUESTION 53HOTSPOT

Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8Enterprise. You have a remote site that only contains client computers. All of the client computer accounts arelocated in an organizational unit (CU) named Remotel. A Group Policy object (GPO) named GPO1 is linked tothe Remote1 CU. You need to configure BranchCache for the remote site. Which two settings should youconfigure in GPO1? To answer, select the two appropriate settings in the answer area.

A.B.C.D.



QUESTION 54HOTSPOT

Your company has a main office and a branch office. An Active Directory site exists for each office. Thenetwork contains an Active Directory forest named contoso.com. The contoso.com domain contains threemember servers named Server1, Server2, and Server3. All servers run Windows Server 2012. In the mainoffice, you configure Server1 as a file server that uses Bra nchCache. In the branch office, you configureServer2 and Server3 as BranchCache hosted cache servers. You are creating a Group Policy for the branchoffice site. In the branch office, you need to configure the client computers that run Windows B to use Server2and Server3 as BranchCache.

A.B.C.D.



QUESTION 55Your network contains two Active Directory forests named contoso.com and fabrikam.com. A two- way foresttrust exists between the forests. The contoso.com forest contains an enterprise certification authority (CA)named CAl. You implement cross-forest certificate enrollment between the contoso.com forest and thefabrikam.com forest. On CA1, you create a new certificate template named Template1. You need to ensurethat users in the fabrikam.com forest can request certificates that are based on Template1. Which tool shouldyou use?

A. Sync-ADObjectB. Pkiview.mscC. CertificateServices.ps1D. CertutilE. PKISync.ps1



QUESTION 56HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains an enterprisecertification authority (CA). The domain contains a server named Server1 that runs Windows Server 2012. Youinstall the Active Directory Federation Services server role on Server1. You plan to configure Server1 as anActive Directory Federation Services (AD FS) server. The Federation Service name will be set toadfs1.contoso.com. You need to identify which type of certificate template you must use to request a certificatefor AD FS.

A.B.C.D.



QUESTION 57Your network contains an Active Directory domain named contoso.com. A previous administrator implementeda Proof of Concept installation of Active Directory Rights Management Services (AD RMS). After the proof ofconcept was complete, the Active Directory Rights Management Services server role was removed. Youattempt to deploy AD RMS. During the configuration of AD RMS, you receive an error message indicating thatan existing AD RMS Service Connection Point (SCP) was found. You need to remove the existing AD RMSSCP.

A. Certification AuthorityB. Authorization ManagerC. ADSI EditD. Active Directory Domains and Trusts



QUESTION 58Your network contains an Active Directory domain named contoso.com. The domain contains a server namedServer1 that runs Windows Server 2012. Server1 has the Active Directory Certificate Services server roleinstalled and is configured as an enterprise certification authority (CA). You need to ensure that all of the usersin the domain are issued a certificate that can be used for the following purposes:· Email security· Client authentication· Encrypting File System (EFS)Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A. From a Group Policy, configure the Certificate Services Client - Auto-Enrollment settings.B. Duplicate the User certificate template, and then publish the template.C. From a Group Policy, configure the Automatic Certificate Request Settings settings.D. From a Group Policy, configure the Certificate Services Client - Certificate Enrollment Policy settings.E. Modify the properties of the User certificate template, and then publish the template.

Correct Answer: ADSection: (none)Explanation


QUESTION 59HOTSPOT

Your network contains an Active Directory domain named contoso.com. The domain contains two ActiveDirectory sites named Site1 and Site2. You need to configure the replication between the sites to occur by usingchange notification. Which attribute should you modify?

A.B.C.D.



QUESTION 60Your network contains an Active Directory domain named contoso.com. The domain contains a main office anda branch office. An Active Directory site exists for each office. All domain controllers run Windows Server 2012.The domain contains two domain controllers. The domain controllers are configured as shown in the followingtable.

DC1 hosts an Active Directory-integrated zone for contoso.com. You add the DNS Server server role to DC2.

You discover that the contoso.com DNS zone fails to replicate to DC2. You verify that the domain, schema, andconfiguration naming contexts replicate from DC1 to DC2. You need to ensure that DC2 replicates thecontoso.com zone by using Active Directory replication. Which tool should you use?

A. DnslintB. A DNS ManagerC. Active Directory Users and ComputersD. Dnscmd



QUESTION 61Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. Thedomain contains four servers. The servers are configured as shown in the following table.

You need to update the schema to support a domain controller that will run Windows Server 2012.On which server should you run adprep.exe?

A. DC1B. DC2C. Server1D. Server1



QUESTION 62Your network contains an Active Directory domain named contoso.com. The domain contains domaincontrollers that run either Windows Server 2003, Windows Server 2008 R2, or Windows Server 2012. You planto implement a new Active Directory forest. The new forest will be used for testing and will be isolated from theproduction network. In the test network, you deploy a server named Server1 that runs Windows Server 2012.You need to configure Server1 as a new domain controller in a new forest named contoso.test. The solutionmust meet the following.

Select two options below.

A. There is no need to set the Forest Functional Level.B. Set Forest Functional Level to Windows 2003.C. Set Forest Functional Level to Windows 2008D. Set Forest Functional Level to Windows 2008 R2.E. Set Forest Functional Level to Windows 2012.F. There is no need to set the Domain Functional Level.G. Set Domain Functional Level to Windows 2003.H. Set Domain Functional Level to Windows 2008I. Set Domain Functional Level to Windows 2008 R2.J. Set Domain Functional Level to Windows 2012.

Correct Answer: EGSection: (none)Explanation

Explanation/Reference:Explanation:* When you deploy AD DS, set the domain and forest functional levels to the highest value that yourenvironment can support. This way, you can use as many AD DS features as possible. For example, if you aresure that you will never add domain controllers that run Windows Server 2003 to the domain or forest, selectthe Windows Server 2008 functional level during the deployment process. However, if you might retain or adddomain controllers that run Windows Server 2003, select the Windows Server 2003 functional level.When you deploy a new forest, you are prompted to set the forest functional level and then set the domainfunctional level. You cannot set the domain functional level to a value that is lower than the forest functionallevel.Incorrect answers:A, F: We are creating a new forest. Both Forest Functional level and Domain Functional Level must beconfigured.

Note 1: Windows Server 2012 requires a Windows Server 2003 forest functional level. That is, before you canadd domain controllers that run Windows Server 2012 to an existing Active Directory forest, the forestfunctional level must be Windows Server 2003 or higher. Note 2: AD DS can be installed in Windows Server2012 by using the Add Roles Wizard in Server Manager, followed by the Active Directory Domain ServicesConfiguration Wizard, which is new beginning in Windows Server 2012.Reference: Understanding Active Directory Domain Services (AD DS) Functional Levels

QUESTION 63Your network contains two Active Directory forests named contoso.com and fabrikam.com. The contoso.comforest contains two domains named corp.contoso.com and contoso.com. You establish a two-way forest trustbetween contoso.com and fabrikam.com. Users from the corp.contoso.com domain report that they cannot logon to client computers in the fabrikam.com domain by using their corp.contoso.com user account. When theytry to log on, they receive following error message:"The computer you are signing into is protected by an authentication firewall. The specified account is notallowed to authenticate to the computer."Corp.contoso.com users can log on successfully to client computers in the contoso.com domain by using theircorp.contoso.com user account credentials. You need to allow users from the corp.contoso.com domain to logon to the client computers in the fabrikam.com forest. What should you do?

A. Configure Windows Firewall with Advanced Security.B. Enable SID history.C. Configure forest-wide authentication.D. Instruct the users to log on by using a user principal name (UPN).



QUESTION 64Your network contains two servers named Server1 and Server2 that run Windows Server 2012. Both servershave the Hyper-V server role installed. The servers have the hardware configurations shown in the followingtable.

Server1 hosts five virtual machines that run Windows Server 2012. You need to move the virtual machinesfrom Server1 to Server2. The solution must minimize downtime. What should you do for each virtual machine?

A. Export the virtual machines from Server1 and import the virtual machines to Server2.B. Perform a live migration.C. Perform a quick migration.D. Perform a storage migration.



QUESTION 65Your network contains an Active Directory domain named contoso.com. The domain contains two serversnamed Server1 and Server2. Both servers have the Hyper-V server role installed. You plan to replicate virtualmachines between Server1 and Server2. The replication will be encrypted by using Secure Sockets Layer(SSL). You need to request a certificate on Server1 to ensure that the virtual machine replication is encrypted.Which two intended purposes should the certificate for Server1 contain? (Each correct answer presents part ofthe solution. Choose two.)

A. Client AuthenticationB. Kernel Mode Code SigningC. Server AuthenticationD. IP Security end systemE. KDC Authentication

Correct Answer: ABSection: (none)Explanation


QUESTION 66Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2 that run Windows Server 2012. Both servers have the Hyper-V server roleinstalled. The network contains an enterprise certification authority (CA). All servers are enrolled automaticallyfor a certificate-based on the Computer certificate template. On Server1, you have a virtual machine namedVM1. VM1 is replicated to Server2. You need to encrypt the replication of VM1. Which two actions should youperform? (Each correct answer presents part of the solution. Choose two.)

A. On Server1, modify the settings of VM1.B. On Server2, modify the settings of VM1.C. On Server2, modify the Hyper-V Settings.D. On Server1, modify the Hyper-V Settings.E. On Server1, modify the settings of the virtual switch to which VM1 is connected.F. On Server2, modify the settings of the virtual switch to which VM1 is connected.

Correct Answer: ADSection: (none)Explanation


QUESTION 67Your network contains an Active Directory domain named contoso.com. The domain contains a file servernamed Server1 that runs Windows Server 2012. You create a user account named User1 in the domain. Youneed to ensure that User1 can use Windows Server Backup to back up Server1. The solution must minimizethe number of administrative rights assigned to User1. What should you do?

A. Add User1 to the Backup Operators group.B. Add User1 to the Power Users group.C. Assign User1 the Backup files and directories user right and the Restore files and directories user right.D. Assign User1 the Backup files and directories user right.



QUESTION 68You have a server named Server1 that runs Windows Server 2012 and is used for testing. A developer at yourcompany creates and installs an unsigned kernel-mode driver on Server1. The developer reports that Server1will no longer start. You need to ensure that the developer can test the new driver. The solution must minimizethe amount of data loss. Which Advanced Boot Option should you select?

A. Disable Driver Signature EnforcementB. Disable automatic restart on system failureC. Last Know Good Configuration (advanced)D. Repair Your Computer



QUESTION 69Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes to Cluster1. You need to ensure that Cluster1 stops running if three nodes fail.What should you configure?

A. Affinity-NoneB. Affinity-SingleC. The cluster quorum settingsD. The failover settingsE. A file server for general useF. The Handling priorityG. The host priorityH. Live migrationI. The possible ownerJ. The preferred ownerK. Quick migrationL. The Scale-Out File Server



QUESTION 70Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theFailover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1.You add two additional nodes in Cluster1. You have a folder named Folder1 on Server1 that hosts applicationdata. Folder1 is a folder target in a Distributed File System (DFS) namespace. You need to provide highlyavailable access to Folder1. The solution must support DFS Replication to Folder1. What should youconfigure?


Correct Answer: ESection: (none)Explanation


QUESTION 71Your network contains an Active Directory domain named contoso.com. The domain contains two memberservers named Server1 and Server2. All servers run Windows Server 2012. Server1 and Server2 have theNetwork Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster namedCluster1. Port rules are configured for all clustered applications. You need to ensure that Server2 handles allclient requests to the cluster that are NOT covered by a port rule. What should you configure?


Correct Answer: GSection: (none)Explanation

Explanation/Reference:MICROSOFT

EXAM 70-412

Prepare for Microsoft Configuring Advanced Windows

Server 2012 ServicesTotal Questions:

For More Information:


70-412qa71 formatted - GRATIS EXAM · 2012-11-20 · Exam A QUESTION 1 You have a DHCP server named...

Documents

Transcript of 70-412qa71 formatted - GRATIS EXAM · 2012-11-20 · Exam A QUESTION 1 You have a DHCP server named...