StriploxEnginEErEd to innovatE Brought to you by Häfele

ww

w.h

afel

e.co

m.a

u

striplox - engineered to innovate / 03.15

2

Page 2

47

143

12.5

127

47 47

143

4

8.5

12.8

1 2

Striplox™ and Joinlox® are trademark and patent protected internationally. Installation Guide Pro 55 - Metric V1.2

- each substrate mounting face is rebating

substrate.

Setting back the mounting face of either the Hook (as shown) or Key by 12.8mm results in a concelled joint without the need to cut rebates.

- 1 of the substrate mounting faces is

screw embedment in substrate.

1

BA

A

C

A 200 kg

B 106 kg

C 200 kg

•

•

Developed to aid in the installation of the Striplox Pro 55, 90D 98, Mini 60 and 120.

Visit or call about these installation aids.

Instant adhesive with a 15 second cure time. Liquidlox delivers a strong and reliable connection between Striplox products and most substrates.

Part Rebate

Rebate Mounting

Set-Back Mounting

Load Capacity

Full Rebate

Installation Aids

Striplox Mark-Out Template Striplox Liquidlox

Direction Indic. Load Capacity

Page 1

Hook Key

126

45

32

32 (3

X)

142

UN

LOCK

ED

12.8

3.9

OPTIONAL

Remove locking tab on the Hook if you wish to create a disassemblable joint. This is best done with a sharp utility knife.

1

2 3

4 5

Material High Strength Reinforced NylonColour BlackFixing Method 8G Screws (8x) or Glue

Mark center lines, vertical and horizontal, on both substrates. Flush mounting requires no additional preparation. Line the notches in each component (Hook shown here) with the center lines. can also be used.

Hold the component in place and fasten to the substrate with 8 x 8G screws. Repeat for matching component.

Prior to assembly, establish whether the joint is to be permanent or disassemblable.

Assembly the joint remembering the Pro 55 only needs to travel 1 pitch for full engagement.

When assembled, the substrates will be separated by the thickness of the engaged Pro 55.

See second page for and

mounting options.

can also be used for mounting the Pro 55.

Flush Mounting

Mark-Out Template

Installation Guide Pro 55 - Metric

Striplox Liquidlox

Rebate Set-Back

Striplox EnginEErEd to innovatE

Striplox rapid assembly connectors from Häfele are revolutionising the design and cabinetry hardware industry worldwide by providing a fast, strong and versatile concealed joining and fastening systems. the key to the award-winning Striplox connector range is their speed and ease of use, featuring the unique design of interlocking teeth which lock in one action to evenly spread loads along the length of the joint, providing a strong and tight connection every time. this makes the entire Striplox range perfect for hundreds of tool-less applications and installations on or off-site.

internationally patent protected and designed to suit all standard manufacturing processes whilst incorporating the internationally recognised System 32 for ease of fitting and assembly, the Striplox range of connectors are ideal for fastening together a wide variety of materials and applications. Examples include architectural features, Commercial/residential Fit-outs, panel & Ceiling, Joinery, Solid timber joints, Furniture Manufacturing, Shelving, Modular Kitchen and Bathroom design, Cabinets, displays & Exhibition Manufacturers, rta / Knock down Components, Modular and pre-fab Construction, Custom Cabinetry, retail, office and domestic Components and installations, Signage & Framing, rv and Marine Fit-outs.

“tHE pErFECt Joining Solution”

StriploxMounting

inStruCtionS availaBlE

upon rEquESt

3

pro 23 pro 55

> Area of application: Ceilings, walls, cabinetry, feature panels Commercial wall panelling and office partitioning, acoustic panelling, floating shelves Furniture construction and interior fitting, Shop fitting, RV and marine fit outs

> Features: No visible fixings Flat pack Designed using the internationally recognised System 32 Cabinetry or panels can be fitted permanently or removed and re-used with ease by removing locking tab Surface mount or rebate mount and orientated for vertical or horizontal assembly

> Material: High strength reinforced Nylon> Fixing method: 8G Screws or glue

Colour Cat. No.

Black 261.06.311

Colour Cat. No.

Black 261.06.300

Packing: 100 pieces Packing: 50 pieces

32105

UN

LOC

K E

D

9.52

89

32 (2

X)

29Key Hook

Locking tab

Hook Key

126

4532

32 (3

X)

142

UN

LOC

K E

D

12.83.9

Locking tab

StRiPlox PRo 23/55StRoNG & DuRABle HiDDeN MouNtiNG SySteM

Updated 08.15

striplox - engineered to innovate / 03.15

4

mini 60 mini 120

> area of application: Modular entertainment builds locker system assemblies Furniture construction and interior fitting shop fitting displays rv and Marine fit outs Commercial wall panelling and office partitioning Feature ceilings, walls, cabinetry, shelving Framing of artwork / mirrors toilet / shower partitioning Wardrobe fit outs

> Features: assembly with standard 100 mm biscuit cutter Cabinetry or panels can be fitted permanently or removed with ease by removing locking tab Joining will not interfere with substrate finish i.e. veneers, two-pack paint Can be used in substrates of 12 mm thickness and upwards no visible fixings - completely concealed joint

> Material: High strength reinforced nylon> Fixing method: glue

Colour Cat. no.

Black 261.06.310

Colour Cat. no.

Black 261.06.305

packing: 200 pieces packing: 100 pieces

Hook

Key

20

60 7

Hook

Key

19.5

124 7

Locking tab

striplox Mini 60/120Convenient ConCealed slide to loCk Joint

noteno locking tab on Mini 60.

Updated 08.15

5

90D 98

Clip 50

> Area of application: Bulkhead and kickboard installation Wardrobe installation Furniture construction and interior fitting - chairs, tables, book shelves, shop fitting, exhibition and trade events, etc

> Features: Eliminates damage - install panels, bulkheads during final build Designed using internationally recognised System 32 Cabinetry or panels can be fitted permanently or removed and re-used with ease

> Material: High strength reinforced Nylon> Fixing method: 8G Screws or glue

> Area of application: Walls, cabinetry, feature panels or commercial panelling Installation of decor frames Enhanced performance of acoustic panelling Interior fittings Furniture construction Shop fitting displays and signage Exhibition and trade events RV and Marine fitouts

> Features: No visible fixings Eliminates damage – install panels during final build Lower transportation cost – flat pack Lower labour costs on site assembly Designed using the internationally recognised System 32 Easy assembly with swivelling lock Key Cabinetry or panels can be fitted permanently or removed and re-used with ease by removing locking tab

> Material: High strength reinforced Nylon> Fixing method: 8G Screws or glue

Colour Cat. No.

White 261.06.301

Colour Cat. No.

Black 261.06.320

Packing: 50 pieces

Packing: 100 pieces

25

Hooks

Key

98LOCKED

115UNLOCKED

25

90°

32

44.5

Ø50

44.5

32

51U

NLO

CK

ED

9.53

Key Hook

Locking tab

StRIPLox 90DRAPID 90 DEGREE joINING SyStEM

StRIPLox CLIP 50

Updated 08.15

striplox - engineered to innovate / 03.15

6

pro 23 jig set

Clip 50 jig set

pro 55 jig set

the Striplox jigs aid installation and save time during fitting. Easily identifiable in red, with hardened centre points in both components to mark all common substrates, allowing for fast and efficient mounting of the pro 23, pro55 and Clip 50. > Material: High strength reinforced nylon> Fixing method: Slide jig into position

Hardened centre points

Colour Cat. No.

red 261.06.981

Colour Cat. No.

red 261.06.982

Colour Cat. No.

red 261.06.980

packing: 1 piece

packing: 1 piece

packing: 1 piece

StriploxaCCESSoriES

7

liquiDlox

7mm router bit

striplox mark-out template

> area of application: liquidlox is a general purpose, middle viscosity, high strength fast cure adhesive compatible with all Striplox assembly products and a wide range of substrates. ideal for use with Striplox Mini 60 and Mini 120

> Features: Ethyl cyanoacrylate adhesive 15 second quick cure Service temperature range -50~80ºC

> area of application: the Striplox 7 mm router Bit produces an accurate and reliable slot for the Mini range of assembly products

> Features: tungsten carbide cutting head> Cut diameter (mm): 7> Shank diameter: 1/4”> Height (mm): 20

> area of application: the Striplox Mark-out template speeds up the manufacturing processes by enabling the easy fitment of the Striplox range of joining solutions.

> Features: Centre points, markings, slot guides Can be used as a 3 mm packer for Striplox pro 55, 90d 98, Clip 50, Mini 60 and Mini 120

Colour Cat. No.

transparent 261.06.990

Cat. No.

261.06.991

Colour Cat. No.

transparent 261.06.490

packing: 1 piece

packing: 1 piece

packing: 1 piece

732.04.672 striplox - 03.15

Häfele australia pty. ltd. | 8 Monterey road | Dandenong | Victoria 3175phone: 1300 659 728 | Fax: (03) 9212 2001 | email: info@hafele.com.au | www.hafele.com.au

Häfele New Zealand pty. ltd. | 16 Accent Drive | East tamaki | Auckland 2013phone: 0800 442 335 | email: info@hafele.co.nz | www.hafele.co.nz

HÄFele loCatioNs:

australia i MElBoUrNE i sYDNEY i NEWCAstlE i BrisBANE i ADElAiDE i lAUNCEstoN i HoBArt i pErtH

New Zealand i NortH islAND i loWEr NortH islAND i CENtrAl rEgioN i soUtH islAND