7 Flyer Uk 2013

7/28/2019 7 Flyer Uk 2013

1/12

B T T N E RELEKTRONIK

2013

Solar Technologyand

innovative Electronics

Solar Technologyand

innovative Electronics

MOB I L E H OM E I CARAVAN I MAR I N E I L E I S U R E

7/28/2019 7 Flyer Uk 2013

2/12

In the leisure-time sector and especiallyin caravans, where the onboard battery isalready available as energy storage, solar

technology is the optimal supplement forthe onboard power supply.

Setup and function :A solar power system has a very simplesetup. One or several solar modulesare mounted on the roof. From there, aconnecting cable first runs to the solarcharge controller inside the caravan andthen to the already existing onboardbattery. During light irradiation, the solar

cell generated power is supplied to theconnected onboard battery via the solarcharge controller. This process continuesuntil the controller recognises a fullycharged battery and interrupts the powerflow. By this, the control ensures optimalbattery charging at all times.

By the way, all other charging possi-bilities already existing at the battery(charger, motor charging) will remainunchanged.

Which solar power systemfor which applicationAt BTTNER ELEKTRONIK, we only sellsolar modules proven and tested for many

years and especially suitable for mobileapplication. Some manufacturers of solarmodules only offer a limited guarantee

when modules are used in caravans. Wedo not offer these types of modules, onprinciple. All attached and surface-mounted parts must also be suitable forthe rough application in caravans withoutany restriction. Therefore, we use waterpressure resistant cable ducts and high-quality brackets of polyurethane (not ABS)with an extremely long service life. Thesolar control was also especially designedfor caravans and offers some importantadditional functions such as gel / acid /AGM changeover or charging of a second

battery.

All solar modules offered by us are state-of-the-art products. Depending on themodule type, there are also very specificadvantages. These should be taken intoconsideration depending on the setupand application conditions. For furtherinformation please see page 4 !

Solar power system with20/40 watt (wp) approx. 80/160 wh/d*Vehicle category:

Suitable for year-round batterypreservation in caravans.Ample power in caravaning torecharge the supply battery

for manoeuvring systems (movers)


Smaller caravans without TV/SATTravelling time:

Spring to autumnConsumers:

Lights, water pump, radio


Smaller to medium-sized caravansTravelling time:


Lights, water pump, radio, Truma,TV/SAT (2-3 hours)

Solar power system with120 watt (wp) approx. 480 wh/d*Vehicle category:

Medium-sized to large caravansTravelling time :


Lights, water pump, radio,Truma, TV/SAT

Solar power system from160 watt (wp) approx. 640 wh/d*Vehicle category:

Medium-sized to large caravans

Travelling time :Whole year (depending on weatherconditions and battery capacity)Consumers:

Lights, water pump, radio, Truma,TV/SAT, compressor refrigerator

Solar power system from280 watt (wp) approx. 1.120 wh/d*Vehicle category:

Large caravansTravelling time :

Whole year (depending on weatherconditions and battery capacity)

Consumers:Lights, water pump, radio, Truma,TV/SAT, compressor refrigerator

*Most manufacturers state the output in wp,

some in wh/d (watt hours per day)

Which outputshould I choose ?

Solar Power Systems2

Solar energy theclever alternative

7/28/2019 7 Flyer Uk 2013

3/12

Type Output Output per day Dimensions Order(wp

) (wh/day

)LWH

(mm

)number

MT BL - 20 20 80 530 350 30 SK 11020MT BL - 40 40 160 660 500 30 SK 11040MT BL - 75 75 300 917 540 30 SK 11075Equipment of the complete solar set: Mono-crystalline MT solar module with preassembled solar cable,adhesive roof brackets, adhesive set, roof duct, high-quality solar charge controller, battery connection cable

The 20 W starter set is optimal foruse in mobile campers or caravans foryear-round battery maintenance and for

operating a caravan manoeuvringsystems. For greater power and to com-pensate for smaller consumers, the40 W starter setor the 75 W startersetis the ideal solution.

As all our solar complete systems, theBASIC LINE sets are ready to installwith adhesive roof bracket, cable duct and

a high-quality solar charge controller. Bothsystems stand out due to their low weightand high-quality workmanship at an veryaffordable starter price.

Decision-making aidsWhich solar system corresponds bestwith your individual requirements ? For asimpler presentation, we introduced sym-

bols and assigned them to the pertinentsystem. It will thus be very easy for youto make the right decision.

Developed specifically for cara-vans: Solar modules for caravans are

subject to different stresses than those forresidential systems ! For example, mobileapplications require outlets to be resistantto hydrostatic pressure (airstream) andsoldered connections to be specificallycarried out to withstand vibrations whiletravelling. Also, the framework structurerequires a special design to compensate forany potential distortions and developinglifting forces.

Suitable for marine use: The in-dividual components are saltwater-

resistant.

Low structural height: The solarmodule is set either directly onto

the roof surface without any substructure(FLAT LINE ) or it is adhesively bondedwith a flat mount ( BASIC LINE ).

40-cell design: Solar module witha high number of cells to compen-

sate for performance losses due to directbonding.

Walk-on modules: Solar modulescan be walked on if they are glued on

over the entire surface.

Low weight: Weight benefits versusother solar systems of identical per-

formance.

Small surface / high performance:Extremely high performance due to

selected raw material.

Performance benefits with partialshading: More resistant to partial

shading due to longitudinal strip technology.

Performance benefits in unfa-vourable weather conditions: Test

winner best solar system in unfavourableweather and with partial cloud cover ( Reise-mobil International Issue 10/2012)

Removable solar module: Once thevehicle is sold, the solar module

can be removed from the basic mount andreinstalled on a new vehicle.

Longwarranty period

BASIC LINE Starter sets12 V 20 Wp | 40 Wp | 75 Wp

* except starter sets BASIC LINE

Solar systems are among the most pru-dential purchases regarding caravans. Solarpower is free of maintenance and charge.It is generated without noise and turnsa caravan into a leisure vehicle that nolonger is dependent on the mains. Solar

systems ofBTTNER ELEKTRONIK

areeasy to mount and simply connected to theexisting onboard battery.

Complete solar systems

All complete systems are supplied withsuitable spoiler profiles and a solid roofduct. These components from high-qualityPUR plastic are protected against harmfulUV radiation and extremely weather-proof.The solar modules are affixed to the spoilerprofiles. This allows the system to be takendown when you change your vehicle. Thefixture itself is affixed to the roof with aspecial adhesive set, which has beentested and approved by the TV (GermanTechnical Inspection Agency). The adhesivemethod has the advantage that no holeshave to be bored into the roof.

Bonding and bracketsTV-inspected + approved

Each system is equipped with a dualsolar controller*. These have the latestcharacteristic curves and can be switchedto gel / AGM / acid batteries. All solarcontrollers have a second charge output(starter battery) and a connection for the

solar remote display (optional).The solar controllers of the systemsMT 60; MT 90; MT 140; MT 55 CIS;MT 80 CIS; MT 110; MT 175, MT 70 FL andMT 70 FG are designed in such a way thatthey can be expanded by a module of thesame output, if necessary.

Always a step ahead !

For vehicles with EBL base station (ve-hicles of the Hymer group) a suitableconnecting cable set is supplied.*

Vehicles withEBL base stationManufacturer Model year

Hymer all Brstner from 2000Detheleffs from 2000Frankia from 1998LMC from 2000

( from MY 2009 only partly )

TEC from 2000( from MY 2009 only partly )

Adria from 1998Carthago from 2002

( up to MY 2010 partly )

Pilote from 2004Le Voyageur from 2006

Solar Power Systems 3B T T N E RELEKTRONIK

7/28/2019 7 Flyer Uk 2013

4/12

MT Complete Solar Systems Mono-crystalline solar modules have been used for many decades. Due to this

long practical experience they are one of the most long-lived energy sourcesavailable. All modules have a robust aluminium frame and are protected againstweather influences with special glass. To achieve the full output in all applicationareas, these modules must be ventilated from below. The bracket to be affixed

with adhesive will ensure this. The installation height of approx. 7 cm shouldbe taken into consideration. In most cases, however, this is not any higherthan an existing standard skylight. When planning it should also be observed

that any already mounted components (SAT etc.) do not shade the solar plate.

These modules provide particularly high efficiencies even inunfavourable weather conditions due to the novel MultiCelltechnology where 72 solar cells are used on one module.

MT CIS Complete Solar Systems One of the most outstanding features of CIS solar modules is their absolutelyhigh-quality finishing. This module series also has a robust mounting frame andspecial glass on the back. This and the slightly bigger surface area are the reasonsthat these modules are slightly heavier than conventional standard modules.An advantage is that due to their longitudinal strip technology they react a lot less

sensitive to partial shading than any other module type. Especially inmobile applications the energy yield is a lot higher since it is not alwayspossible to prevent depending on the location that branches of trees, a

mounted roof-case or the SAT equipment partially shade the solar modules.The installation height of 7 cm should also be considered here. This, however,should not create any problems.

MT Power Line Complete Solar Systems MT POWER LINE solar modules achieve an extremely high efficiency level.This allows for a great solar output even with restricted space conditions.For developing their full performance in all areas of application, modules areto be ventilated from below which is ensured by adhesive, TV-approvedsolar mounts.

This range of solar modules is also produced in accordance with ourstringent quality standards to guarantee permanent use on the caravan

even in harsh conditions. The anodised housing frame is particularly robust,while the front glass is specially hardened and so highly pervious to light.

As a result, the modules are optimally protected even against hail and highwinds. As with all complete systems, the POWER LINE series is supplied as

a set with all accessories required for the installation.

MT Ultraflat Complete Solar Systems These solar modules can be affixed directly onto the vehicles roof withadhesive. We only produce these solar modules with a higher number of cells(40 cells instead of the conventional 36), so that there is no output loss evenin Southern holiday regions where due to the vehicle insulation the heat canonly be discharged poorly and therefore the solar output drops.

This series is mostly used when clearance heights must be observed and/

or it should be possible to walk on the modules. The modules areavailable in two versions: As FG with solid glass surface suitablefor all level roof surfaces as well as FL, which is equipped with a Teflon

foil and therefore can be bent slightly in longitudinal direction ( 30 mmmaximum) and affixed to slightly curved roof surfaces.





4 Solar Power Systems

Which solar system should I choose?

7/28/2019 7 Flyer Uk 2013

5/12

MT CIS Complete Solar Systems

CIS solar modules are significantly less sensitive to partialshading and achieve a higher yield than all conventionalsolar modules under these more difficult circumstances.The modules are integrated into a robust housing frameand protected by safety glass from the top and bottom.

MT Complete Solar Systems

This series of solar modules is characterised by its level ofefficiency and high-quality finish. The modules are integratedinto a robust housing frame and protectedby safety glass from the top.

MT Power Line Complete Systems

Complete solar systems with mono-crystalline high-performancemodules. They guarantee extremely high output and require onlylittle space.

MT Ultra-flat Complete Solar SystemsThese crystalline flat solar modules can be affixed with adhesivedirectly without ventilation from underneath. The modulesare ideal for circumstances when clearance heights must beobserved and/or it should be possible to walk on the modul.

+

Accessory tip:Solar remote displaysInstallation devices that can be plugged into any MTDuo solarcontroller

using the plug-in cable ( 5 m ) supplied. Without complexcabling, you can see at a glance how efficient the solar system is at anygiven moment Further info on page 10 !

Type Output Module Dimensions Order(wp) number Lx Wx H (mm) number

MT 60MC 60 1 1170 450 66 SK 12061MT 90MC 90 1 1335 530 66 SK 12091MT 140MC 140 1 1600 660 66 SK 12141MT 120-2MC 120 2 2 1170 450 66 SK 12121MT 180-2MC 180 2 2 1335 530 66 SK 12181MT 280-2MC 280 2 2 1600 660 66 SK 12281


MT 110 110 1 1320 530 66 SK 13110MT 175 175 1 1600 660 66 SK 13175MT 220-2 220 2 2 1320 530 66 SK 13220MT 350-2 350 2 2 1600 660 66 SK 13350Equipment of the complete solar systems: Mono-crystalline 110 wp MT solarmodule/s Dual solar charge controller Roof spoiler set, incl. accessories Roof duct

Service/distributor block Adhesive set for spoiler set and roof duct Cable set for inside/outside Cable set for vehicles with EBL Incidentals Mounting material/ instructions

Tip: Hybrid Autarkic System


MT 55 CIS 55 1 1025 605 66 SK 22055MT 80 CIS 80 1 1325 605 66 SK 22080MT 110 CIS 110 2 2 1025 605 66 SK 14110MT 160 CIS 160 2 2 1325 605 66 SK 14160

Equipment of the complete solar systems: Mono-crystalline MT-CIS solar module/sDual solar charge controller Roof spoiler set, incl. accessories Roof duct Service/distributor block Adhesive set for spoiler set and roof duct Cable set for inside/outside Cable set for vehicles with EBL Incidentals Mounting material/instructions

Accessory tip: MT 4000 iQHow much power is left in the onboard batteries? Similar to a fuel gauge,the battery computer MT 4000 iQ displays the remaining batterycapacity in Ah and per cent along with the remaining battery life andmany other functions.More info on page 10 !


MT 70 FG 70 1 1135 450 SK 70000MT 140 FG-2 140 2 2 1135 450 SK 70140MT 70 FL 70 1 1135 450 SK 70070MT 140 FL-2 140 2 2 1135 450 SK 70150Equipment of the complete solar systems: Ultra-flat solar module/s with crystallinecell technology Dual solar charge controller Diode distributor Roof duct Adhesive

set for module and roof duct Cable set for inside/outside Cable set for vehicles withEBL Mounting material Instructions for affixing with adhesive and installation

ThisMT Power Line solar system canbe combined with an EFOYfuel cell.Both systems are designed for use witheach other and can be connectedthrough simple plug connection.Order our info sheet now !

Equipment of the complete solar systems: Mono-crystalline MT solar module/sDual solar charge controller Roof spoiler set, incl. accessories Roof duct Service/distributor block Adhesive set for spoilers and roof duct Cable set for inside/outsideCable set for vehicles with EBL Mounting material Incidentals Installation instructions

5Solar Power Systems

All solar systems overview


7/28/2019 7 Flyer Uk 2013

6/12

detachable

operating unit

detachable

operating unit

* full charging output (at 110 V approx. 50% charging output) 24 V chargers available on request

Separate accessories: Cable extension for operating unit (5m) ............................................................................................................................ MT 02005Temperature sensor: absolutely recommended for AGM and gel batteries............................................. MT 12241

Technical Data MT 1215 MT 1220 MT 1225 MT 1230 MT 1240 MT 1260Input voltage 190 V - 255 V * 190 V - 255 V * 190 V - 255 V * 190 V - 255 V * 190 V - 255 V * 190 V - 255 V *Mains frequency 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz 45 - 65 Hz 45 - 65 HzBattery voltage 12 V 12 V 12 V 12 V 12 V 12 VRecommended capacity 40 Ah - 170 Ah 65 Ah - 240 Ah 75 Ah - 300 Ah 80 Ah - 360 Ah 85 Ah - 480 Ah 110 Ah - 660 AhCharging current 0 - 15 A 0 - 20 A 0 - 25 A 0 - 30 A 0 - 40 A 0 - 60 ADimensions (L x W x H mm) 270 223 70 270 223 70 270 223 70 270 223 70 335 223 70 335 223 70

Weight 2650 g 2690 g 2710 g 3100g 3600g 3800 gOrder number MT 81215 MT 81220 MT 81225 MT 81230 MT 81241 MT 81261

MT Automatic dual chargersMT Automatic dual chargers Like all other devices by Mobile

Technology, the chargers Made inGermany are also precisely adjusted totheir range of applications.

Optimal performance is ensured by:

latest IUoU charging characteristics

long-time activating

AGM/gel/acid battery changeover

This also ensures monitor-free chargingwith automatic battery regeneration incase of long standing times or when thecaravan is stored in winter.

To increase the charging output all devicescan be switched in parallel to already

existing chargers and are protected againstshort circuit, overload, reverse polarisationetc. A voltage stabilisation is integratedand ensures sufficient charging output

even when the mains supply is weak orunstable. The operating unit with displayfunctions and optional night mode canbe removed and fitted in the vehicle as

remote control (cable extension optionallyavailable).

From the series MT 1240 the chargershave an integrated second main chargingoutput. This enables charging of batterybanks being operated separately. Theseunits also have a 3-step switch to reducethe output rating on parking grounds withweak fuse protection.

A temperature sensor for optimal chargingin all climate zones is available for all

MT chargers (optional). When usingAGM and gel batteries, this sensor isrecommended on principle by the batterymanufacturers.

What charging performance

is necessary?

The greater the charging performance,the quicker the onboard battery isrecharged. Chargers that are too smalldo not achieve a full recharge in caseof short downtimes.

If you have to recharge 90Ah with a10 Ampere charger, youll need at least9 hours provided that it does notconsume power simultaneously. If youhave 20 Ampere charging current,

you can fully recharge in only 4.5 hours.

As a guideline, a minimum of 10 percent of the Ah capacity should bedefined as charging current.

Chargers6

E L E C T R O N I C S I N F O i

at a reasonable price

by Mobile Technology

7/28/2019 7 Flyer Uk 2013

7/12

detachable

operating unit

detachable

operating unit

Separate accessories: Inverter for air-conditioning on request

Cable guard set for MT 1000-SI/SI-N .............................. MT 06175Cable guard set for MT 1500-SI/SI-N .............................. MT 06250 Cable extension for operating unit (5 m) .....................MT 02005

Technical Data MT 300SI MT 1000SI MT 1000SI-N MT 1500SI MT 1500SI-NInput voltage 12 V ( 10,5 V - 16 V )Output voltage 230 V AC / 50 Hz, quarzstabilisiertContinuous rating/peak rating 300 W / 600 W 1000 W/2000 W 1000 W/2000 W 1500 W/3000 W 1500 W/3000 WPower consumption stand-by 0,003 A max. 0,2 A max. 0,2 A max. 0,2 A max. 0,2 AMains changeover no no yes no yesDimensions (L x W x H mm) 270 223 70 400 299 70 400 299 70 480 299 70 480 299 70Weight 2150 g 5950 g 5950 g 7100 g 7100 gOrder number MT 01300 MT 01005 MT 11005 MT 01505 MT 11505

MT inverters: 230 Volt onboardMT inverters: 230 Volt onboard MT inverters are Made in Germanyand ensure an optimal supply of 230 Voltsalways and everywhere.

Inverters of the SI model range operate withpure sine wave voltage and are thereforealso suitable for the most sensitiveconsumers (e.g. coffee machines by Jura,Saeco or Senseo etc.). The MT 300 SI isalready sufficient to operate TV/SAT, videounits, DVD, computers or battery chargers.For larger consumers, inverters with1000 watts or 1500 watts are available.

All units are capable of handling overloadsand are equipped with whisper fan and allmonitoring and switchoff functions. Theoperating unit with display functions can

be removed and mounted in the vehicle asremote control. An integrated load detec-tion switches the units to power savingmode when not used and, if required, alsocompletely off.

The large inverters have an optional mainsswitchover function. These units detectwhen external shore power is available andfully automatically switch over. As long as

shore power is available, the inverter isswitched off and shore power is suppliedto the interior sockets. When shore poweris no longer available, the inverter can bestarted and the same sockets are nowsupplied with inverter power.

All inverters are supplied ready for connec-tion with plug and battery cable (1.2m).

Air-conditioning during drivingAir-conditioning systems have an extremelyhigh power consumption. For this reason, avery powerful inverter must be used. The

appropriate set, including control electronicsthat ensure the inverter receives sufficientpower and is switched off in time to pre-vent the total discharge of the batteries, isavailable on request.

Which inverter should I use?

Inverters produce an AC voltage of230V out of 12V onboard voltage.Commercial end devices therefore canbe operated via the normal onboardbattery.

Inverters are available in various outputsizes, and depending on the rated input,the appropriate inverter must be

selected.

For smaller devices such as TVs or SAT

receivers, theMT 300 SI can suffice.

Coffee machines or hairdryers mayneed a more powerful device,depending on the rated input.

Inverters 7

E L E C T R O N I C S I N F O i


7/28/2019 7 Flyer Uk 2013

8/12

Battery + Charging8

Type MT PB 90 MT PB 125Capacity 90 Ah C100 125 Ah C100

Dimensions (L x W x H mm) 247 175 190 353 175 190Weight approx. 20 kg (filled) approx. 25 kg (filled)Order number MT B00090 MT B00125

Onboard supply batteriesWhich battery is suitable for which use ?Normal starter batteries are not designed for cyclical loads and notrecommended as onboard batteries. Cycle-proof batteries are idealfor the loads generated during discharging/charging operation.

We distinguish between batteries with bound electrolyte as gelor AGM batteries and the classic liquid/acid batteries. Gel and AGMbatteries are leak-proof and completely maintenance-free over theirwhole service life. Both types of batteries are highly cycle-proofunder the required charging conditions. Gel batteries can even be

discharged deeply for a short period of time, always under thecondition that they are immediately recharged. AGM batteries ofthe same size have a slightly higher output and can deal with evenvery high charging/discharging currents for a short period of time.On principle, all cycle-proof batteries are suitable for solar systems.

Higher battery capacity If you want to expand your battery capacity, you could just connectadditional batteries in parallel. The pre-requisite is that the batteriesare of the same design (gel, AGM or liquid acid) and capacity. Also,no old battery should be connected to a new one. Additionally,it should be checked whether the existing charger is sufficient forthe higher capacity.

The correct charger In order to ensure that onboard batteries reach the expected cycleand service life, the charging must be optimal. When changing to adifferent battery type, it must be checked if the charger is designedfor this technology or if the output is sufficient or should beincreased. Output tables and charger that can be switched to allbattery types can be found on page 6.

Fuel gauge for the battery How much power is left in the onboard batteries ? Similar toa fuel gauge, the battery computer MT 4000 iQ displays the exactbattery capacity remaining in Ah.

All incoming and outgoing currents aremeasured so the electronic system can usethese values to show the exact capacity onthe display. It also indicates how much poweris currently going into the battery or takenout see page 10.

12 V onboard battery ( liquid acid)

MT Powerbattery 12V/90Ah C100 12V/125Ah C100 Onboard batteries with extremely high power density. Developedfor high cycle loads and ideally suited to solar operation and inverteruse. Perfect onboard battery with very good price/performance ratio.

12 V onboard battery (AGM)

MT AGM battery 90 Ah C100 to 120 Ah C100 Leak-proof and absolutely maintenance-free onboard batterieswith state-of-the-art AGM technology and glass fibre fleece design.Developed for extremely high cycle loads and perfectly suited forsolar operation and inverter use. Optimal power input even withcool outside temperatures (Winter camping).

Type Capacity LxWxH(mm) Weight Order nr.

MT Gel 90 90Ah C100 353 175 190 26,8 MT G0090MT Gel 130 130Ah C100 513 189 223 40,7 MT G0130MT Gel 155 155Ah C100 513 223 225 47,8 MT G0155MT Gel 235 235Ah C100 518 291 242 70,0 MT G0235

12 V onboard battery (gel)

MT Gel battery 12V/90Ah C100 to 12V/235Ah C100 Leak-proof and absolutely maintenance-free onboard batterywith proven gel technology. Developed for the everyday consumersonboard. Gel batteries mean extremely high cycle loads with outputreserves and are perfectly suited for solar operation and inverter use.

Type MT AGM 90 MT AGM 110 MT AGM 120Capacity 90 Ah C 100 110 Ah C 100 120 Ah C 100LxWxH(mm) 287 175 190 353 175 190 332 174 213Weight approx. 19 kg approx. 24,5 kg approx. 32 kgOrder number MT AGM090 MT AGM110 MT AGM120

Onboard supply batteries

7/28/2019 7 Flyer Uk 2013

9/12

Type MT LB 25 MT LB 45Voltage 12 V 12 VCapacity 25 A (IU0U charging) 45 A (IU0U charging)Dimensions (L x W x H mm) 270 223 70 270 223 70Order number MT 03025 MT 03045

Battery + Charging 9

BatterieController MT100-iQ

Connected to the battery cable, it protects the battery andconnected consumers against overvoltage and undervoltage.

The latest switching threshold technology also protects theonboard battery against harmful discharge by small consumers. Sideoutlet for Truma valve and Stand-by (Radio) provided. Optionally,a remote control (main switch function) can be connected. This

also displays the operating state by means of LEDs.

It is finally possible to guarantee optimal and quick charging evenon the move. The multi-award-winning MT IUOU charger booster

from BTTNER ELEKTRONIK is simply connected to the chargingcable of the onboard battery.Available in two output ratings (25A and 45A), the IUOU char-

ging characteristics of these devices ensure that the charging ratefrom the generator is not only increased, but that the charging vol-tage is also elevated to the level necessary for the respective typeof battery for full charging and as required by the battery manu-facturers.

state-of-the-art charging technology forhigh charging capacity even for short distances

on longer journeys, the IUOU charge ensuresfull charging and prevents overcharging

all devices are provided with a battery changeoverswitch (gel, AGM, standard acid)

removable operating unit allows for remote controlfrom inside the vehicle

The MT IQ-DUO is specifically designed for use in caravans; itprevents the buildup of harmful sulphate deposits and keeps thebattery in shape with various programme intervals. Depending of theoperational mode (driving mode/charging operation or downtime)intervals are used according to exactly defined engine operatingmaps. Switchable to battery type (starter or onboard, acid, gel or

AGM) and its respective capacity

Remote control

optionally available

Remote controloptionally available

Type Voltage Dimensions (mm) Order nr.

MT Batterie iQ-Duo 12 V 86 76 38 MT 03090Accessories: Remote control (cable length 5 m) MT 03600

Cable extension for remote control (5 m) MT 02005

Type Voltage Switching current Dimensions (mm) Order nr.

MT 100-iQ 12 V/24 V 100 A 86 76 38 MT 03078Accessories: Remote control (cable length 5 m) MT 03080

Cable extension for remote control (5 m) MT 02005

MT iQ-Duo

IUOU charger boosterOptimal charging even for short distances

The onboard battery is responsible for supplying power when the cara-van is not provided with shore power. Not the easiest of tasks given theincreasing number of electricity consumers operated on board and thelimited battery capacity available. It is therefore all the more important

that the onboard battery is quickly and optimally charged on short drives, and withthe right characteristic for longer drives. In practice, however, this is not so easy

since the onboard battery is charged not directly by the generator, but in parallel bythe starter battery via a cut-off relay. As a consequence, the charging current iskept to a minimum and the voltage is all wrong. The result is that the charging pro-cess takes an unreasonably long time or proves inadequate even on longer drives,because the generator cannot provide the voltage level required for gel or AGM bat-teries. This is remedied by theMT IOUO charger booster. Depending on the ver-

sion, it takes 25 amp or 45 amp from the starter battery, takes this output to therequired voltage level (battery type adjustable) and so guarantees quick and safecharging of the onboard batteries.

i


MT iQ-Duo

MT 03090MT 100-iQ

MT 03078

7/28/2019 7 Flyer Uk 2013

10/12

Solar remote display II

MT 71250

Solar remote display I

MT 71242

Surface-mounted housing

MT 01216

Always in the know !Always in the know !

Type Voltage Dimensions (mm) Order nr.

MT Solar Remote Display I 12V 85 45 20 MT 71242MT Solar Remote Display II 12V 85 80 20 MT 71250

Accessories: Surface-mounted housing (for SRD II) MT 01216Cable extension (5 m) MT 02005

MT 4000 iQ Voltage Dimensions (mm) Order nr.

with 100 A Shunt 12/24 V 85 80 20 MT 71262with 200 A Shunt 12/24 V 85 80 20 MT 71265with 400 A Shunt 12/24 V 85 80 20 MT 71268

Accessories: Surface-mounted housing MT 01216Cable extension (5 m) MT 02005

MT solar remote displays

Easy-to-use combination device displays voltage, charge/dis-charge current, and the remaining battery capacity in Ah and per centwith remaining life display. Other data available include outsidetemperature (min/max memory), time and date. Switching outputavailable, freely programmable.

MT 4000 iQBattery computer

MT Display and Switch Programme0

Nothings more ideal than when everything in the camper van orcaravan can be controlled and monitored from a central point. Theinverter is switched on with the press of a button, all fluid levelsare checked at a glance. How much power does the solar systemprovide and what about the capacity of the onboard battery ?

The MT display and switch programme from BTTNER-ELEKTRONIK lets you set up your very own, individual controlcentre that can later be upgraded where necessary. This allows youto check the output of the solar power system with one glanceat the MT solar remote display, while the battery computerMT 4000 iQ shows how much power is left in the onboardbatteries. This device should interest even those who already owna camper van or caravan featuring a range of level indicators andswitches. Contrary to the often integrated indicators of the caravan

manufacturers, the battery computer calculates the exact fill levelof the onboard battery (in Ah and %) and can therefore tell youexactly when the lights will go out.

For mobile use made in GermanyAll displays were specially developed for use in camper vans andcaravans. The LCD thermometer, for instance, not only shows thecurrent inside and outside temperatures, but also stores the lowestvalue. An important aspect for all who are out and about in theautumn and winter months and want to gauge whether and whenthe septic tank is about to freeze up.

All measuring devices were designed as installation units(installation frame supplied), have an illuminated display, and arecompatible with the switch and fuse programme.

Installation devices that can be plugged into any MT Duo solar con-troller using the plug-in cable (5m) supplied. Without complex cab-ling, you can see at a glance how efficient the solar system is at anygiven moment: Fitted with LEDs, theMT Solar Remote Display I dis-plays the current output of the solar system incrementally in per cent(10 100%).MT Solar Remote Display II with large LED display andmany additional functions.

7/28/2019 7 Flyer Uk 2013

11/12

Where possible, select a tank sensorthat is fitted into the tank from the top especially if the tank is inside, as lateraldrilling and sealing is always risky.

All MT tank sensors are suitable for plastic

and metal tanks. The tank electrode hasstainless steel rods extending into the tank.These can be shortened to the appropriatetank depth, as can the two flexible sensorswhich can display fill levels up to a depth ofover one metre.

1. MT iQ voltmeter/timer clockMeasurement of voltage (start /onboard);programmable switching output; time, date

: 9 - 30 V (H W D): 85 80 20 mm

MT 71256

2. MT iQ amperemeterMeasurement of power flow up to 100 A;

time and date; programmable switchingoutput; (incl. battery measuring shunt): 9 - 30 V (H W D): 85 80 20 mm

MT 71259

3. MT iQ thermometerMeasures inside /outside temperatures viaremote sensor (incl.); min/max memory

: 9 - 30 V (H W D): 85 80 20 mm

MT 71253

4. MT duo battery checkSwitchable, shows start /onboard voltagevia light-emitting diodes

: 12 V (H W D): 85 47 20 mm

MT 712455. MT fresh water display10-bar display for the exact fill level*

: 12/24 V (H W D): 85 47 20 mm

MT 75311

6. MT sewage / faecal displayBar display like freshwater display.Switchable when two tank sensors (wastewater /faecal tank) are connected *

: 12/24 V (H W D): 85 47 20 mm

MT 75309

7. MT main switch 20 AOn /off switch with overload protection

: 12/ 24 V (H W D): 85 47 20 mm

MT 71419

8. MT fuse panel 44 automatic fuses: 6 A; 8 A; 10 A and 12 A with tripping contro

: 12/ 24 V (H W D): 85 47 20 mm

MT 71415

9. MT switch panel 44 x one /off switch (8 A) with LED control

: 12 V (H W D): 85 47 20 mm

MT 71414

10. MT socket panel

Standard socket for DIN plug (ISO 4165): 12/ 24 V (H W D): 85 47 20 mm MT 71418

11./12. MT switch panel I / II1 x or 2 x individual switch (16 A each)

: 12/ 24 V (H W D): 85 47 20 mm

Switch panel I MT 71417Switch panel II MT 71517

13. MT front plate Usable for installation of own components

(H W D): 85 47 20 mm

MT 02110

14. MT iQ info panelShows start/onboard voltage and fresh /waste water / faecal tank fill levels;

Main switch (16 A) and pump switch (10 A)integrated*

: 12 V (Hx Wx D): 55 200 20 mm

MT 75330

15. MT surface-mounted housingSuitable for MT displays measuring(HWD) 858020 mm MT 01216

16. MT pictogram filmwith 70 abrasion-resistant symbols fixable

to the panels. MT 02111

* Tank sensors to be ordered separately

MT tank electrodeFor plastic and metal tanks.Fitting from top. Shorten totank height(20 - 50 cm) MT 75540

MT tank probe FLFor plastic and metal tanks.Fitting from top. Shorten totank height(30 - 110 cm) MT 05550

MT tank sensor FLFor plastic and metal tanks.Fitting from top or side.Shorten to tank height(30 - 100 cm) MT 05530

MT tank sensors

MT Display and Switch Programme 11

1614

13121110

5 6 7 8 9

1 2 3 4

15


7/28/2019 7 Flyer Uk 2013

12/12

The practical book for

even more information

The standard literature for allthose who think about using solar

technology in a caravan or mobilehome.Describes everything on 120 pages,

from the design to do-it-yourselfinstallation, with a lot of illustrationsand easy to understand.

All those who already have a solarpower system will find a lot of hintsfor accessories and everythingregarding troubleshooting.

Available from yourMOBILETECHNOLOGYspecialised dealer

YourMOBILE TECHNOLOGYdealer will inform you about our product range

2

Now in its 4 th Edition:

Bttner Elektronik GmbH

Dieselstrae 27

D-48485 Neuenkirchen

GermanyTel.: + 49 5973 / 90037-0

Fax: + 49 5973 / 90037-18

Mail: [email protected]

Web: www.buettner-elektronik.de

MT Solar Power Drive

The absolute power combination formanoeuvring drives. An extremely light andcompact AGM high-power battery provides

sufficient output power to navigate the caravanquickly and safely. The system is charged andmonitored via a solar power system. This, too,is extremely light and can be installed in notime. As a result, drive current is availableanywhere at any time. No additional costsand no need to have a supply point close-by.

MT Solar Power Drive ICombination of high-power battery CE 1 andsolar system with 20W charging capacity,enough to recharge the battery in next to notime. The compact drive battery weighing amere 6kg provides the manoeuvring systemwith a starting current of up to 1,800 A tomove any caravan in the right position.Scope of delivery:AGM high-power battery CE 1

L W H: 170 99 175 mm; weight: 6 kg20 wp solar set (with monitoring electronics.Ready-to-install with all accessories to fix ontothe caravan roof); weight: approx. 4.5 kg

MT Solar Power Drive IIMore reserve power for even longermanoeuvring or to supply the water pump orLED lighting during immobile periods. TheMT Solar Power Drive II is fitted with thehigh-power battery CE 2. This energy blockweighing only 11.5 kg can manage startingcurrents of up to 2,400 A. It is charged using

a 40 W solar power system to guaranteequick charging, even when additional poweris collected for smaller onboard consumers.Scope of delivery:AGM high-power battery CE 2L W H: 168 179 128 mm; weight: 11,5 kg

Solar set 40 wp (with monitoring electronics.

Ready-to-install with all accessories to fix ontothe caravan roof); weight: approx. 6 kg

Additional charger 230 VIf you keep your caravan in a hall over thewinter or fit a protective roof for longerperiods of immobilisation, you will want toremove your battery and charge it externally.Both CE batteries are compact, light andeffortlessly removed. To ensure that thebatteries are optimally charged even withoutsolar power, we recommend using theMT CE-3.6 continuous charger which ispermanently connected to the battery and

can also be used in case the starter batteryis flagging.

Solar Power Drive I

MT 12021

230 V charger

MT 12000

Solar Power Drive II

MT 12041

RATING

Efficiencyvalue

Price value

SUMMARYConcentratedinformationon 120 four-

coloured pages

Issue 08/2004

MT Solar Power DriveExtremely light energy bundles for manoeuvring systems

Manual XIIIHints, info&prices onmore than 90 pages...

Available fromyour local dealer

MOBILE TECHNOLOGY WITHOUT COMPROMISE

Tip:Add toyour order !

7 Flyer Uk 2013

Documents

Transcript of 7 Flyer Uk 2013