LTE & 3G WiFi Offload Essentials 02 - 05 Dec 2013 Dubai - UAE

Code Course Duration Price(4 days)

6100-3010 RF and Wireless Fundamentals

4 days 850 USD

6100-3012 LTE & LTE Advanced Essentials Certificate Program

4 days 850 USD6100-3013Mobile Data Offload for 3G/LTE and

Small Cells 4 days 850 USD

6100-3014 StarPlus PtP and PtMP Network Design, Installation, and Configuration

4 days 850 USD

6100-3015 StarAccess 2000 Network Design, Installation, and Configuration

4 days 850 USD

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

RF and Wireless Fundamentals

Code Course6100-3010 RF and Wireless Fundamentals

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

RF and Wireless FundamentalsWho Should Attend

This course is designed for anyone needing a solid foundation for understanding the principles of RF and Wireless Engineering. Engineers, technicians and managers who are new to RF and Broadband Wireless (WiFi & WiMAX) requiring applicable skills in RF design, planning and engineering. Anyone working within the field of general RF systems, wireless, cellular and microwave systems will benefit from this comprehensive coverage of RF fundamentals. Basic mathematical and computing skills are recommended for this course. An electrical or computer engineering background or equivalent practical experience is desired but not required.

Prerequisites: None

Course Outlines

Basic Radio and RF Concepts RF Energy RF Generation, Transmission, and Reception Oscillators and Power Amplifiers dB and dBm power conversions Digital Modulation of RF Signals Amplitude, Frequency Modulation, QAM & QPSK Filtering Equalizers Multiple Access Techniques TDMA, FDMA, CDMA OFDM, W-OFDM, SOFDMA Duplexing, TDD vs. FDD Channel Coding Spread-Spectrum Modulation

RF Propagation Principals Path / Propagation Losses Fading Fade Margin and Fresnel Zone Link Budgets Receiver Sensitivity Noise Figure Guard Band BER vs. Noise Link Budget and High Level System Design Sample Link Budget Calculations

Antennas Antennas Basics Effective Radiated Power (ERP) Directivity and Gain Antenna Types Antenna Radiation Patterns Polarization Diversity Antenna Systems MIMO Antenna Systems

System Planning Wireless Topologies PTP and PMP LOS, NrLOS, NLOS Licensed & Unlicensed Frequency Bands Frequency Planning Frequency Reuse RF Site Survey RF Site Survey Tools

LTE & LTE Advanced Essentials

Code Course6100-3012 LTE & LTE Advanced Essentials

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

LTE & LTE Advanced Essentials Who Should Attend This course is designed for anyone needing a solid foundation for understanding the principles of LTE Technology. Engineers, technicians and managers who are new to LTE and LTE Advanced requiring applicable skills in RF design, planning and engineering. Anyone working within the field of general RF systems, wireless, cellular and microwave systems will benefit from this comprehensive coverage of LTE and LTE Advanced fundamentals. Basic mathematical and computing skills are recommended for this course. An electrical or computer engineering background or equivalent practical experience is desired but not required.

Prerequisites: RF and Wireless Fundamentals. Some understanding of mobile networks would be an advantage for those attending this course

Course Outlines

Evolution to LTE and LTE Architecture

Service Oriented Architecture of LTE

LTE Operations and Procedures

LTE Advanced EPS Architecture Network Attach & Acquisition Release 11 & Beyond Operational Procedures Deployment Considerations

IP Multimedia Subsystem (IMS): Introduction Protocols in VOIP and IMS

VoLTE and IMS in LTE Networks Introduction VoLTE Pre Call Functions Call Management Signaling CSFB QoS Framework in LTE: EPC IMS Interworking IMS Charging Architecture VoLTE End to End Signaling

Mobile Data Offload for 3G/LTE and Small Cells

Code Course

6100-3013 Mobile Data Offload for 3G/LTE and Small Cells

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

Mobile Data Offload for 3G/LTE and Small Cells Who Should Attend

This course is designed for anyone needing a solid foundation for understanding the principles of Mobile Data Offloading Solution. Engineers, technicians and managers who are new to MDO requiring applicable skills in RF design, planning and engineering. Anyone working within the field of general RF systems, wireless, cellular and microwave systems will benefit from this comprehensive coverage of MDO fundamentals. Basic mathematical and computing skills are recommended for this course. An electrical or computer engineering background or equivalent practical experience is desired but not required.

Prerequisites: RF and Wireless Fundamentals. Some understanding of mobile networks would be an advantage for those attending this course

Course Outlines

Architecture for Mobile Data Offload over Wi-Fi Access Networks

Spectrum Challenges for data offload Is the existing bandwidth sufficient to support high data rates What channel bandwidths are expected FCC decision on adding more spectrum Offload strategy and methods to reduce network congestion in

key areas Network mapping and testing in dense urban settings Handling and preventing interference and network overload Backhaul and legal issues with outdoor deployments Overview of Wi-Fi Offload Architecture Authentication

Portal-Based Authentication EAP-Based Authentication Next Generation Hotspot

Policy and Charging Control Standalone PCEF GTP to Traditional GGSN PCC Integration Considerations Inter-Radio Handover Trusted 3GPP Wi-Fi access Untrusted 3GPP Wi-Fi access Small Cells in Licensed and Unlicensed How Small Cells can play role indoor and outdoor Value proposition of small cells from the customer point of view Small Cells Offloading

Mobility Gateway AAA RADIUS

StarPlus PtP and PtMP Network Design, Installation, and Configuration

Code Course6100-3014 StarPlus PtP and PtMP Network Design, Installation, and Configuration

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

StarPlus PtP and PtMP Network Design, Installation,

and ConfigurationWho Should Attend

This course is designed for engineers who are deploying wireless networks using StarPlus System either in Point to Point mode or Point to Multipoint mode. This course will be extremely useful and informative for engineers currently involved in the design, deployment, and maintenance of fixed wireless systems using StarPlus .

Prerequisites: RF and Wireless Fundamentals.

Course Outlines

Product Description StarPlus Series System Features About W-OFDM & MIMO About Point-to-Multi-Point (P-MP) Systems About Point-to-Point (P-P) Systems Specifications

Simple Budget Planning Worksheet AP (for P-MP) or Base (for P-P) CPE (for P-MP) or Remote (for P-P)

Bench TestingSetup processStarPlus Check ListAssembling the StarPlus Units

Field Installation Site Preparations Tools and Equipment StarPlus System Hardware installation procedure

Configuration PTP Link Configuration Example PMP Configuration Example Normal to Turbo Mode Upgrade Procedure Spectrum Scanning Manual TDD Splitting Interference Mitigation (TrustLink) Sector Locking using MAC Address IPv4 and IPv6 Pass through DHCP & NAT Support for CPE Multiple Service Flows (QoS & CIR) VLAN Pass-through and VLAN Configuration Wireless Link Monitoring Antenna Alignment Tools Firmware Upgrade Procedure Backup and Redundancy Procedure Wireless Security Settings and Password Reset

StarAccess 2000 Network Design, Installation, and Configuration

Code Course

6100-3016 StarAccess 2000 Network Design, Installation, and Configuration

BECOME A CERTIFIED WIRELESS ENGINEERFOR WIRELESS/WIMAX/LTE NETWORKS

StarAccess 2000 Network Design, Installation, and

Configuration Who Should Attend This course is designed for engineers who are deploying wireless networks using StarAccess 2000 System. This course will be extremely useful and informative for engineers currently involved in the design, deployment, and maintenance of outdoor WiFi wireless systems using EION StarAccess 2000. Integration required for design a WiFi offload system

Prerequisites: RF and Wireless Fundamentals. Some understanding of mobile networks would be an advantage for those attending this course

Course Outlines

About OFDM Network Design and dimensioning Seamless Mobility Mobile Data Offload concept Wifi Offload design Product Description

StarAccess Series Products Wireless Topologies StarAccess Hardware

Pre-Installation Required Tools Site Evaluation Grounding Weatherproofing Connectors Cable Shielding

StarAccess Installation Antenna mounting guide Powering the unit

StarAccess Configuration Accessing GUI Wireless Configuration Interfaces Network Configuration DHCP and DNS Hostnames Routes Firewall Zone Settings Firewall - Port Forwards Diagnostics

System Administration System Properties Time Synchronization Flash Operations Backup and Flash Firmware Reboot requirements

About the Instructor

About EIONs VP of Sales Africa, Middle East, and Central Asia

About EION / Wi-LAN

BECOME A CERTIFIED EION WIRELESS ENGINEER

FOR WIMAX NETWORKS

320 March Road Suite 500Ottawa, Ontario, K2K 2E3, Canada Tel: +1 (613) 271- 4400Worldwide Headquarterswww.eionwireless.com

Hassan AbdelghanyVice President of SalesLebanon Region OfficeMobile: +961-3-775-254Fax: +961-7-530-786Email: Hassan@eion.com

Dr. Waleed HosnyInternational Applications EngineerCairo, EgyptMobile: +2012-212-2845Fax: +2 (023) 536-5774Email: whosny@eion.com

Waleed Hosny has a PhD in Wireless Communication in 2004 and during his career in Canada based NTG Clarity, Wi-LAN Inc. and EION Wireless he managed Large scale Wireless/WiMAX network deployments Worldwide. Typical projects are in Libya, Saudi Arabia, Qatar, UAE, Oman, Egypt, Nigeria, Russia, India, Cuba, Cambodia, and Costa Rice.

Waleed Provided Training/Seminars for Hundreds of Engineers who are working in the area of Telecommunication all over the world.

Waleed used to provide Professional and Focused Consulting Services and Training Services in Wireless Communication onsite at the customer premises. The Wireless Engineering services can be contracted on demand or monthly, Bi-Monthly, or Quarterly based on the network size and customer requirements.

Mr. Hassan Abdelghany has extensive knowledge of the Broadband Wireless and telecommunications sector. His experience over the last decade servicing major National Licensed Operators and Major Enterprise Customers in the Middle East region will be instrumental to EIONs success in our region. As EIONs Vice President of Sales for Africa, Middle East and Central Asia regions, Mr. Abdelghany will fulfill EIONs mandate to lead the companys sales, marketing and customer support efforts in this important geographical region. Mr. Abdelghany held several Manufacturing Engineering and Senior International Telecom Sales positions in North America and the Middle East Region and holds a Bachelor of Science Degree in Industrial Engineering from the University of Lowell, Lowell, MA. USA

On April 19, 2006 EION Wireless Inc. of Ottawa, Canada acquired Wi-LANs VIP110-24, Ultima3, TEmux & LibraMX product lines. EION Wireless Inc. has accepted Global responsibility for all Warranty Repairs and non Warranty Repairs for all existing and new Wi-LAN product installations.EION is committed to continue product developments for its newly acquired Wi-LAN Product families including the introduction of EIONs new WiMAX Certified LibraMAX Base Station Blades & LibraMAX Subscriber Stations for EIONs existing Wi-LAN LibraMX 3.5GHz WiMAX Platform System.EION Wireless Inc. is a Canadian Based global provider of wireless broadband communication products and technologies, specializing in high-speed Wireless Internet Access, LAN/WAN extension and Enterprise Wireless broadband data communication access. EION is a leader in Embedded IP Intelligence Technology & IP over Satellite Solutions for mission critical Telecom and Defense Applications. EION intends to integrate its Embedded IP Intelligence Technology into its LibraMX and LibraMAX 3.5GHz WiMAX Platform Systems. Wi-LAN is the chairman of the OFDM Forum and a founding member of the WiMAX Forum. Wi-LAN also Chaired WiMAXs Technical Working Group (TWG) responsible for WiMAX interoperability, testing & certifications.Wi-LANs W-OFDM patent is necessary for the implementation of devices using WiFis IEEE802.11a, IEEE802.11g & ETSI HiperLAN/2 Wireless LAN standards as well as WiMAX IEEE802.16-2004, 802.16e & ETSIs HiperMAN Wireless WAN standards.EIONs & Wi-LANs Broadband Wireless products are known worldwide for their high quality and industry-leading technology.

BECOME A CERTIFIEDEION WIRELESS ENGINEER FOR

WiMAX & WiFi & Wireless Networks