6” Threaded Cap - DenHartog Industries · 2019. 6. 10. · 14889 reh 8/9/18 adh 5/31/18 6" cap -...
2
June 2019 www.denhartogindustries.com [email protected] 4010 Hospers Dr. South Hospers, IA 51238 Ph: 800-342-3408 Fax: 712-752-8222 “Always at Your Service” PRODUCT RELEASE 6” Threaded Cap Ported or Non-Ported Specifications: • Shipping weight of Cap and Gasket assembly is 1.2 lb. 6” Cap with Buttress Port Features: • Available with no top port or single 2-2.5” modified buttress threads or single 2” NPS threads in top port. • Rated for maximum internal pressure of 15 PSI. • Applications requiring pressure leak or pressure loss testing such as that required for UN compliance. • UN regulated tanks, totes and IBC products. • Furnished with a gasket. • Santoprene grade 55 durometer gasket is standard (black in color). • Viton 75-80 gasket is optional (brown in color). • Manufactured from HDPE: • Resin meets FDA 21 CFR 177.1520, ASTM D4976 – PE 233 and UL94HB specifications. • Maximum torque for tightening is 75 ft. lbs. (note: pressure rating and tightening torque specification is dependent upon mating male thread fit up and quality). 6” Cap with 2” NPS Port 6” Cap without Port Warning: Cancer and Reproducve Harm. www.P65Warnings.ca.gov
Transcript of 6” Threaded Cap - DenHartog Industries · 2019. 6. 10. · 14889 reh 8/9/18 adh 5/31/18 6" cap -...
June 2019
4010 Hospers Dr. SouthHospers, IA 51238
Ph: 800-342-3408Fax: 712-752-8222
“Always at Your Service”
PRODUCT RELEASE6” Threaded Cap
Ported or Non-Ported
Specifications: • Shipping weight of Cap and
Gasket assembly is 1.2 lb.
6” Cap with Buttress Port
Features: • Available with no top port or single 2-2.5”
modified buttress threads or single 2” NPS threads in top port.
• Rated for maximum internal pressure of 15 PSI. • Applications requiring pressure leak or
pressure loss testing such as that required for UN compliance.
• UN regulated tanks, totes and IBC products. • Furnished with a gasket.
• Santoprene grade 55 durometer gasket is standard (black in color).
• Viton 75-80 gasket is optional (brown in color).
• Manufactured from HDPE:• Resin meets FDA 21 CFR 177.1520, ASTM
D4976 – PE 233 and UL94HB specifications. • Maximum torque for tightening is 75 ft. lbs.
(note: pressure rating and tightening torque specification is dependent upon mating male thread fit up and quality).
6” Cap with 2” NPS Port
6” Cap without Port
Warning: Cancer and Reproductive Harm.www.P65Warnings.ca.gov
6” Threaded CapSPECIFICATIONS
Ph: 800-342-3408Fax: 712-752-8222
4010 Hospers Dr. SouthHospers, IA 51238
2.55
MATERIAL
NOTES:
SCALE
DRAWN / DATE
N.S.
METAL
F
APPRD. / DATE
SHOT WEIGHT:DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
ANGLE ± 1°FRACTION ± 1/4"DECIMAL ± .125"
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
1% @ 68
POLYETHYLENE
PART NO.14887
REH 8/9/18
ADH 5/31/18
6" CAP - WITHOUT PORT AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
560.03 GRAMS
14887KEY PART NUMBER DESCRIPTION QTY.
1 14834 6" CAP - WITHOUT PORT 1
2 14838 6" CAP GASKET-SANTOPRENE 1
REH 8/9/18
R4.22
10.69
14888
REH 8/9/18
ADH 5/31/18
6" CAP - 2" NPT THREAD AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
573.74 GRAMS
14888KEY PART NUMBER DESCRIPTION QTY.
1 14836 6" CAP - 2" NPT THREAD 1
2 14838 6" CAP GASKET-SANTOPRENE 1
REH 8/9/18
2.55
DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
N.S.SCALE
ANGLE ± 1°FRACTION ± 1/4"
NOTES:
DECIMAL ± .125"
MATERIAL
METAL
F
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
SHOT WEIGHT:
APPRD. / DATE
DRAWN / DATE
1% @ 68
POLYETHYLENE
PART NO.
R4.22
10.69
R4.22
10.69
2.55
14889
REH 8/9/18
ADH 5/31/18
6" CAP - 2.5-5 BUTTRESS THREAD AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
576.70 GRAMS
14889KEY PART NUMBER DESCRIPTION QTY.
1 14835 6" CAP - 2.5-5 BUTTRESS THREAD 1
2 14838 6" CAP GASKET-SANTOPRENE 1
DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
N.S.SCALE
ANGLE ± 1°FRACTION ± 1/4"
NOTES:
DECIMAL ± .125"
MATERIAL
METAL
F
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
SHOT WEIGHT:
APPRD. / DATE
DRAWN / DATE
1% @ 68
POLYETHYLENE
PART NO.
2.55
MATERIAL
NOTES:
SCALE
DRAWN / DATE
N.S.
METAL
F
APPRD. / DATE
SHOT WEIGHT:DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
ANGLE ± 1°FRACTION ± 1/4"DECIMAL ± .125"
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
1% @ 68
POLYETHYLENE
PART NO.14887
REH 8/9/18
ADH 5/31/18
6" CAP - WITHOUT PORT AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
560.03 GRAMS
14887KEY PART NUMBER DESCRIPTION QTY.
1 14834 6" CAP - WITHOUT PORT 1
2 14838 6" CAP GASKET-SANTOPRENE 1
REH 8/9/18
R4.22
10.69
14888
REH 8/9/18
ADH 5/31/18
6" CAP - 2" NPT THREAD AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
573.74 GRAMS
14888KEY PART NUMBER DESCRIPTION QTY.
1 14836 6" CAP - 2" NPT THREAD 1
2 14838 6" CAP GASKET-SANTOPRENE 1
REH 8/9/18
2.55
DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
N.S.SCALE
ANGLE ± 1°FRACTION ± 1/4"
NOTES:
DECIMAL ± .125"
MATERIAL
METAL
F
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
SHOT WEIGHT:
APPRD. / DATE
DRAWN / DATE
1% @ 68
POLYETHYLENE
PART NO.
R4.22
10.69
R4.22
10.69
2.55
14889
REH 8/9/18
ADH 5/31/18
6" CAP - 2.5-5 BUTTRESS THREAD AND GASKET ASSEMBLY-SANTOPRENE
SEE COMPONENTS
N.A.
576.70 GRAMS
14889KEY PART NUMBER DESCRIPTION QTY.
1 14835 6" CAP - 2.5-5 BUTTRESS THREAD 1
2 14838 6" CAP GASKET-SANTOPRENE 1
DESCRIPTION
4010 HOSPERS DRIVE S. BOX 425, HOSPERS, IOWA 51238-0425
N.S.SCALE
ANGLE ± 1°FRACTION ± 1/4"
NOTES:
DECIMAL ± .125"
MATERIAL
METAL
F
REV DESCRIPTION BY / DATE CCN
TOLERANCES UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN DECIMAL INCHES
ANSI 14.5MTHIRD ANGLE PROJECTION
written consent of Den Hartog Industries, Inc.and shall not be used, disclosed to others or copied without the expressedor design correspondence is the property of Den Hartog industries, Inc.Copyright. All information furnished within this document, electronic �le
C DEN HARTOG INDUSTRIES, INC.
FINISH:
SHIPPING WEIGHT:
SHOT WEIGHT:
APPRD. / DATE
DRAWN / DATE
1% @ 68
POLYETHYLENE
PART NO.
6” Cap without Port and Gasket Assembly Santoprene or Viton
6” Cap - 2” NPS Thread and Gasket Assembly
Santoprene or Viton
6” Cap - 2-2.5” Buttress Thread and Gasket Assembly
Santoprene or Viton
“Always at Your Service”
Warning: Cancer and Reproductive Harm.www.P65Warnings.ca.gov
