TM

684-2 DeckSupertrak

684R

684The NEW Terex Finlay 684 is a compact easilytransportable machine that offers operators rapid setup and tear down times. The NEW screenboxfeatures two large 4.3m x 1.7m (14’ x 5’ 7”) inclinedscreen decks giving a large screening area toprovide efficient screening and high capacity. Thescreenbox features quick wedge tensioning on thetop deck, access holes and bottom deck hydraulictensioning system to reduce time required formesh changes. All three discharge conveyors areadjustable and hydraulically fold for transport.

NEW double deck 4.3m x 1.7m (14’ x 5’ 7”) screen with full catwalkaccess.

Maximum utilisation of the two 4.3m x 1.7m (14’ x 5’ 7”) decks providesultra-efficient screening capabilities even at small aggregate sizes.

A combination of quick wedge tensioning on the top deck, convenientaccess holes and hydraulic tensioning on the bottom deck ensuremesh set up and change out times are kept to an absolute minimum.

u

u

u

R

Features:

StaNDarD FeatureSTier 3 / Stage 3A Caterpillar C4.4 ATAAC - 4 cylinder diesel engine developing83kW (111hp) 2200 RPMTier 4i / Stage 3B - Caterpillar C4.4 - 4 cylinder diesel engine developing 82kW(110hp) @ 2200 RPMHopper capacity: 8.0m³ (10.5yd³) - 4.25m (14ft) wide hopper

1050mm (42”) wide variable speed belt feeder

Remote control hydraulic tipping reject grid c/w grouser bars 4.25m x 100mmspacing (14’ x 4”)4.3m x 1.7m (14’ x 5’ 7”) top and bottom deck screenboxNo mesh or speedharps included for any deck (but all mesh fitting parts included as standard)2 deck - 2 bearing high performance screenbox

Hydraulic tensioning (bottom deck screen mesh)

Galvanised access catwalks to both sides and around top of screen

Screenbox reject chutes (1nr)

1000mm (39”) wide main belt

Skirting on main conveyor

Anti-rollback plates (3nr)

650mm (26”) wide chevron belt on both side conveyors

1200mm (48”) wide plain belt on fines conveyor

Heavy duty undercarriage unit with 400mm wide tracks

Control operation of tracks via hand-held set with 5m connection lead with heavyduty square connectorLow level central greasing & emergency stops (6)

Safety guards in compliance with machinery directive

power unitu Tier 3 / Stage 3A: Caterpillar C4.4 ATAAC 83kW (111hp) u Tier 4i / Stage 3B: Caterpillar C4.4 82kW (110hp)

Hopper / Feederu Hopper capacity: 8m³ (10.5yd³)u Plain belt: 1050mm (42”)u Drive: Hydraulic/Gearboxu 14’ Tipping Grid u 12’ Double Deck Vibrating Gridu Crusher feed-in chute option

u Maximum standard discharge height: 4845mm (15’ 11”)u Chevron belt: 650mm (26”)

Oversize conveyor

Machine Weight: 28,750kgs (63,380 lbs)

3.5m

(11’

6”)

17.2m (56’ 6”)3m

(9’ 10”)

18.47m (60’ 8”)

16.98m (55’ 9”)

6.11

m (2

0’ 1

”)

transport Dimensions

Working Dimensions

TM

u Length: 4300mm (14’)u Width: 1700mm (5’ 7”)u Angle: 18° to 32°u 2 Deck, 2 Bearing high performance screenbox u All round catwalk access

Fines conveyoru Standard discharge height: 4360mm (14’ 4”)u Plain belt: 1200mm (47”)u Variable operating angle

Middle grade conveyoru Maximum standard discharge height: 4755mm (15’ 7”)u Chevron belt: 650mm (26”)

u Sprocket Centres: 3280mm (10’ 9”)u Shoe: 400mm (16”) single speed tracking

power unitu Tier 3 / Stage 3A: Caterpillar C4.4 ATAAC 83kW (111hp) u Tier 4i / Stage 3B: Caterpillar C4.4 82kW (110hp)

u Maximum standard discharge height: 4845mm (15’ 11”)u Chevron belt: 650mm (26”) Main conveyor

u Plain belt: 1000mm (40”) u Discharge into screen in working mode can be hydraulically adjustedu Can be pinned in maintenance position to improve top deck mesh access

tracks

Screenbox

R

www.terexfinlay.com

Effective January 2013. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex GB Ltd. makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex® is a registered trademark of Terex Corporation in the USA and many other countries. Copyright 2010 Terex GB Ltd.

TM

Follow us on: