64 Push-to-Close Latch · 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50 18.6 (.73) 19.4 (.77)...
Transcript of 64 Push-to-Close Latch · 64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50 18.6 (.73) 19.4 (.77)...
244
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
www.southco.com/64
11(.42)
13 (.53)
43 (1.69)
28(1.10)
0.9(.036)
8 (.32)
1.6 (.065)MaximumDoor Thickness
3.2±.2(.125±.010)
Total grip
24.5
39 9.50±.8(.38±.03)
R 1.5 (.06)Maximum
+0.1-0.3
+0.1-0.3
(1.53±.01)
(.96±.01)9 (.36)
M4 slotted hex head screw/lockwasherassembly (supplied)
Part Number
64-01-10
Part NumberSee table
64 Push-to-Close LatchPull-to-open · Paddle latch · Miniature
• Single hole installation• Concealed mounting• Plastic slide
Material and FinishStainless steel, passivated and brushed finish and glass-filled reinforced nylon, black
Performance DetailsMaximum working load: 90 N (20 lbf)
Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF)
Flammability rating: UL94-V0
Installation NotesMaximum tightening torque on mounting screws: 0.9 Nm (8 inlbf)
Other options available. For complete details on variety, part numbers, installation and specification, go to
245
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
www.southco.com/64
56(2.20)
47(1.84)
42.5(1.67)
B
14(.56)
Cup
25(.97)
13 (.50)
Doorthicknessrange(see table)
Mounting nut
Stud, M4 Thread
BracketSlide (style 1 shown)
Griprange(see table)
1 (.04)
Cover
Paddle
47.5±0.2(1.88±.01)
A
16 (.63) Minimum
10.3±0.2 (.41±01)
36.5±0.2(1.44±.01)
Door
Frame
R 2 (.09) Maximum
Bracket
Stud
Mounting nut
Frame Door
Grip RangeSlide Style
AB
T (See
Notes)
Part Number Brushed Finish
Door Thickness Range
Minimum Maximum Min. Max. 3.7 (.144) Maximum
3.9 - 7.3 (.154 - .288)
11.1 - 14.6 (.437 - .576)
18.6 - 22 (.734 - .868)
1.2 (.05)
2 (.08)
110.4 (.41)
12.7 (.50)
12.4 (.49)
1.6 (.063)
64-10-111-50 ~ ~ ~
2.8 (.11)
3.6 (.14)
3
11.9 (.47)
14.2 (.56)
14.2 (.56)
3.2 (.125)
64-10-113-50 64-10-133-50 ~ ~
6 (.23)
6.7 (.27)
46.4
(.250)64-10-124-50 64-10-114-50 ~ ~
12.3 (.48)
13.1 (.52) 57.1
(.281)64-10-125-50 64-10-135-50 64-10-115-50 64-10-115-50
18.6 (.73) 19.4 (.77) 67.1
(.281)64-10-126-50 ~ 64-10-116-50 64-10-116-50
• Single hole installation• Concealed mounting• Plastic slide
Material and FinishStainless steel, passivated and brushed or black powder coated and glass-filled reinforced nylon, natural
Performance DetailsMaximum working load:
Style Max. Static Load N (lbf)
1 130 (30)
2 110 (25)
3 90 (20)
4 70 (15)
5 55 (12)
Operating temperature range: -18ºC (0ºF) to 100ºC (210ºF)
Flammability rating: UL94-V0
Installation NotesDoor thickness must not exceed T dimension (see table) in area through which slide will operate.It may be necessary to reduce thickness of door in area indicated by grid.
Slide styles:
NotesFor an assembly with black powder coated finish change last digit from 0 to 5 - Example: 64-10-111-55
64 Push-to-Close LatchPull-to-open · Paddle latch · Small
Style 3
Style 4
Style 5
Style 6
246
Dimensions in millimeters (inch) unless otherwise stated
ACTUAL SIZE
www.southco.com/64
R 2 (.09)Maximum
47.5±0.2(1.88±.01)
A
36.50±.2(1.44±.01)
FrameDoor
Bracket
Stud
Mounting nut
Door
Frame
56(2.20)
B Grip range(see table)
Stud, M4 Thread
25(.97)
13 (.50)
1 (.04)
47(1.84)
42.5(1.67) 14 (.56)
Cup
Slide
CoverBracket
Mounting nut
Paddle
Grip Range Part Number AB
Minimum Maximum Stainless Steel, Brushed Stainless Steel Black Powder coated Minimum Maximum
1.2 (.05) 2 (.08) 64-11-10 64-11-12 10.4 (.41) 12.7 (.50) 11.5 (.45)
2 (.08) 2.8 (.11) 64-11-20 64-11-22 11.2 (.44) 13.5 (.53) 11.9 (.47)
2.8 (.11) 3.6 (.14) 64-11-30 64-11-32 11.9 (.47) 14.2 (.56) 12 (.48)
Part NumberSee table
64 Push-to-Close LatchPull-to-open · Paddle latch · Small
• Single hole installation• Concealed mounting• Metal slide
Material and FinishStainless steel passivated and brushed or black powder coated, steel, chrome plated
Performance DetailsMaximum working load: 222 N (50 lbf)
Other options available. For complete details on variety, part numbers, installation and specification, go to
247
Dimensions in millimeters (inch) unless otherwise stated
64 - 2 L - 1 M
ACTUAL SIZE
www.southco.com/64
8(.31)
84(3.31)
1.2 (.05)
M5 Thread
Gap important(See installation notes)
68.5(2.69)
19(.75)
36(1.39)
17.5(.69)
6.4 (.25) Maximum
Doorthickness
7.9 (.31)
Frame
DoorLatch
Mounting bracketAdjusting nut
LockwasherMounting nut
Available with or without lock(see part number selection)
R 2.5 (.09) Maximum
DoorFrame
Minimum 8 (.31)Maximum 11 (.44)
55.5(2.19±.01)
+0.3- 0.1
71.5(2.81±.01)
+0.1- 0.3
Gapimportant(see installation notes)
Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)
11.1 (.44) Min
Adjusting nut
Mountingbracket
LockwasherMounting nut
SlideFrame
7.9 (.31)8. (.31) Minimum11 (.44) Maximum
14.3 (.56) Ref
Door
___________________________________________________________________________ Part Number Selection
64 Push-to-Close LatchPull-to-open · Paddle latch · Medium
• Single hole installation• Concealed mounting• Metal slide
Material and FinishStainless steel brushed, steel, zinc plated or steel, black powder coated or silver
Performance DetailsMaximum working load: 570 N (125 lbf)
Installation NotesMeasure your door thickness and set adjusting nut so that Gap is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00).
AccessoriesFlat key, keyed alike H257 (2 keys per ring) Part number: 64-0-33578
M Material0 Stainless steel, brushed 1 Steel, black powder coated3 Steel, zinc plated5 Steel, powder coated silver
L Lock style1 Non-locking2 Key-locking keyed alike H257 (2 Flat keys supplied) Other options available. For complete details
on variety, part numbers, installation and specification, go to
248
Dimensions in millimeters (inch) unless otherwise stated
64 - 10 - 30 L - M 0
ACTUAL SIZE
www.southco.com/64
Gap important(See installation notes)
Frame
Door
Mounting bracket
Adjusting nutLockwasher
Mounting nut
127 (5.0)
28.5(1.13)
101.5(4)
11(.44)
Available with or without lock (see part number selection)
11.9(.47)
1.6(.06)
4.5 (.17)
1/4-20 Thread
49(1.94)
25.5(1.01)
Maximum door thickness9.5 (.38)
R 3 (.13) Maximum
DoorFrame
Minimum 11 (.44)Maximum 15.9 (.63)
82.5(3.25±.01)
+0.3- 0.2
108(4.25±.01)
+0.2- 0.3
Gapimportant(see installation notes)
Edge of frame ormodified latchingsurface (notch,hole, bracket orshim)
14.3 (.56) Min
Adjusting nut
Mountingbracket
LockwasherMounting nut
SlideFrame
11.9 (.47)20.6 (.81) Ref
Part Number Selection _______________________________________________________________________________
64 Push-to-Close LatchPull-to-open · Paddle latch · Large
• Single hole installation• Concealed mounting• Metal slide
Material and FinishStainless steel, brushed, steel, zinc plated or steel, black powder coated
Performance DetailsMaximum working load: 1110 N (250 lbf)
Installation NotesMeasure your door thickness and set adjusting nut so that GAP is equal to door thickness within plus 0.8 (.03), minus 0.0 (.00)
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
L Lock style1 Non-locking2 Key-locking keyed alike CH751 (2 Flat keys supplied)
M Material4 Steel, zinc plated 5 Stainless steel brushed9 Steel, black powder coated
Other options available. For complete details on variety, part numbers, installation and specification, go to
249
Dimensions in millimeters (inch) unless otherwise stated
64 - 50 - 4 L H - M
ACTUAL SIZE
www.southco.com/64
10.2 (.40)
108 (4.25)
139.7 (5.50)
22.6 (.89)
23.4 (.92)
1.2(.05)
43 (1.7)
4 x Ø rivet mounting onlyH
Available with or without lock (see part number selection)
Tapped hole 1/4-20 for inside release handle (not provided)
Frame
4 x R5 (.20)Maximum
Door
96.8(3.81)
86(3.38)
118 (4.65)95.2 (3.75)
20.9 (.82) 22(.87)
14 (.55)
15 (.59)4 x Ø rivetmounting only
H
___________________________________________________________________________ Part Number Selection
64 Push-to-Close LatchPull-to-open · Paddle latch · Large
• Single hole installation• Multiple mounting styles • Inside actuation in locked or unlocked position
Material and FinishStainless steel, polished, steel, zinc plated or steel, black powder coated
Slide bolt and lock assembly: Zinc plated or powder coated
Performance DetailsMaximum working load: 560 N (125 lbf)
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 Flat keys supplied)
M Material10 Steel, zinc plated 20 Stainless steel polished50 Steel, black powder coated
Other options available. For complete details on variety, part numbers, installation and specification, go to
251
Dimensions in millimeters (inch) unless otherwise stated
64 - 60 - 5 L H - M
ACTUAL SIZE
www.southco.com/64
83(3.27)
88.4(3.48)
9(.35)
5.3 (.21)
52(2.05)
110(4.33)
170 (6.7)
7 (.28)5 (.20)
100(3.94)
52(2.05)
52(2.05)
8 x Ø rivet mounting latches onlyH
Available with or without lock (see part number selection)
Frame
37.9 (1.49)17.2 (.68)
Door thickness
147.7 (5.81)
89(3.50)
Door
4 x R5Maximum
___________________________________________________________________________ Part Number Selection
64 Push-to-Close LatchPull-to-open · Paddle latch · Heavy-duty pivot
• Robust design resists binding from dirt and debris• Multiple mounting styles
Material and FinishSteel, zinc plated or black powder coated
Slide bolt and lock assembly: Zinc plated or powder coated
Performance DetailsMaximum working load: 2700 N (607 lbf)
AccessoriesFlat key, keyed alike 14603 (2 keys per ring) Part number: PK-10-01-14603
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike 14603 (2 Flat keys supplied)
M Material10 Steel, zinc plated 50 Steel, black powder coated
Other options available. For complete details on variety, part numbers, installation and specification, go to
271A
Dimensions in millimeters (inch) unless otherwise stated
64 - 40 - 4 L H - M
ACTUAL SIZE
www.southco.com/64
108 (4.25)
139.7 (5.50)
23(.91)
1.2(.05)
40.9 (1.61)
12(.45)
3(.13)
Ø 6.3(.25)
Ø 2.3(.09)
47 (1.85) Unlatched
70 (2.75)Latched
29 (1.14)Latched
25 (1.0) Unlatched
4 x Ø rivet mounting onlyH
Available with or without lock (see part number selection)
4 x R 5 (.20)Maximum
4 x ØRivet mounting only
Door
96.8(3.81)
86(3.38)
118 (4.65)95.2 (3.75)
H
64 Push-to-Close ActuatorPull-to-open · Paddle handle actuator · Multi-point · Large
Part Number Selection _______________________________________________________________________________
• Flush mounting installation• Multiple mounting styles• Locking and Non-Locking options
Material and FinishStainless steel, polished, steel, zinc plated or black powder coated
AccessoriesFlat key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01
Overmolded key, keyed alike CH751 (2 keys per ring) Part number: PK-10-01-05
NotesAC Cable end fitting must be eyelet for this actuator (Page 272)
H Housing0 Weld1 Rivet through hole 4.9 (.19)2 Rivet through hole 5.2 (.20)
L Lock style0 Non-locking1 Key-locking keyed alike CH751 (2 Flat keys supplied)
M Material10 Steel, zinc plated 20 Stainless steel, polished50 Steel, black powder coated
Other options available. For complete details on variety, part numbers, installation and specification, go to
(2 PL) For use with AC Cables, must use eyelet fitting. Use cotter pin to secure end fitting.