64° - mis-implants.rumis-implants.ru/files/catalogs/13.pdf · User Manual Multi-unit Angulated...
Transcript of 64° - mis-implants.rumis-implants.ru/files/catalogs/13.pdf · User Manual Multi-unit Angulated...
-
User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)
MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:
The standard Multi unit abutment allows a maximum 30° insertion path.
^
^
30°
Recommended tightening moment 35 Ncm.
*
The 17° Multi unit abutment allows a maximum 64° insertion path.
^ ^
64°
Recommended tightening moment 30 Ncm.
*
^
^
90°
Recommended tightening moment 30 Ncm.
*
The 30° Multi unit abutment allows a maximum 90° insertion path.
© MIS Corporation. All rights Reserved.
MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483
EC REP
®
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL
General Information.Instrument Maintenance for surgical tools:
Batch Code
Catalogue Number ®
Manufacturer
-
2.6mm
15°
1.3mm 1.2mm
A definition of the product.
The Multi Unit Angulated abutment assembly contents:
The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■ Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.
MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.
MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.
or
MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.
Abutment.
Gripping Bar.
3.2mm
1.2mm 15°
30°
1mm
Operating Procedure.
1
Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.
A. B. C.
2
The Multi Unit angulated abutment is now positioned in place and secured to the implant.
3
17°
CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.
Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.
In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).
-
2.6mm
15°
1.3mm 1.2mm
A definition of the product.
The Multi Unit Angulated abutment assembly contents:
The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■ Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.
MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.
MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.
or
MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.
Abutment.
Gripping Bar.
3.2mm
1.2mm 15°
30°
1mm
Operating Procedure.
1
Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.
A. B. C.
2
The Multi Unit angulated abutment is now positioned in place and secured to the implant.
3
17°
CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.
Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.
In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).
-
2.6mm
15°
1.3mm 1.2mm
A definition of the product.
The Multi Unit Angulated abutment assembly contents:
The device is intended as an intra-oral abutment secured to implants onto which a multiple unit prosthetic restoration is screw-retained ■ Standard impression procedure ■ Low profile,allowing a wide spectrum of insertion possibilities for correction of up to 90 angle ■ Advance solution for rehabilitation on implants in total edentulous patients ■ Additionally suited for use when implant inclination in buccal and screw insertion path is lingually.
MA-ANH17 Multi unit angulated abutment 17° with incorporated abutment screw.
MA-ANH30 Multi unit angulated abutment 30° with incorporated abutment screw.
or
MM-PG250Multi unit gripping bar indicates direction when positioning the multi unit angulated abutment. Supports the abutment when screwed onto implant.
Abutment.
Gripping Bar.
3.2mm
1.2mm 15°
30°
1mm
Operating Procedure.
1
Place Multi unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. Note the opening at the bottom of the grip bar that serves to fit in a screwdriver (Multi unit key MT-MUK02) and torque the screw to 30 Ncm.
A. B. C.
2
The Multi Unit angulated abutment is now positioned in place and secured to the implant.
3
17°
CharacteristicsThe Multi Unit abutments are made of Titanium Alloy Ti 6Al-4V ELI ■ The Multi Unit gripping bar is made of Delrine ■ The multi unit abutment can be connected in one of 6 possible positions on the fixture head.
Recommended tightening moment of the reconstruction screw to the angulated abutment: 25 Ncm.
In cases where Multi Unit angulated abutment is needed, select abutment according to the implant angulations (17°/30°).
-
User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)
MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:
The standard Multi unit abutment allows a maximum 30° insertion path.
^
^
30°
Recommended tightening moment 35 Ncm.
*
The 17° Multi unit abutment allows a maximum 64° insertion path.
^ ^
64°
Recommended tightening moment 30 Ncm.
*
^
^
90°
Recommended tightening moment 30 Ncm.
*
The 30° Multi unit abutment allows a maximum 90° insertion path.
© MIS Corporation. All rights Reserved.
MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483
EC REP
®
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL
General Information.Instrument Maintenance for surgical tools:
Batch Code
Catalogue Number ®
Manufacturer
-
User ManualMulti-unit Angulated Abutment (MA-ANH17/MA-ANH30)
MP-UI024 Rev.2Extensive insertion path Maximum angulations function for Multi unit angulated abutment:
The standard Multi unit abutment allows a maximum 30° insertion path.
^
^
30°
Recommended tightening moment 35 Ncm.
*
The 17° Multi unit abutment allows a maximum 64° insertion path.
^ ^
64°
Recommended tightening moment 30 Ncm.
*
^
^
90°
Recommended tightening moment 30 Ncm.
*
The 30° Multi unit abutment allows a maximum 90° insertion path.
© MIS Corporation. All rights Reserved.
MIS Implants Technologies GmbHPaulinenstr. 12 A, 32427 Minden, GermanyT e l : + 4 9 5 7 1 - 9 7 2 - 7 6 9 0Emai l : serv ice@mis- implants .de0483
EC REP
®
MIS Implants Technologies Ltd.P.O.Box 7, Bar Lev Industrial Park20156, ISRAEL
General Information.Instrument Maintenance for surgical tools:
Batch Code
Catalogue Number ®
Manufacturer