61 Native Install 6.1.0.11.860 Readme First
Click here to load reader
-
Upload
raja-macherla -
Category
Documents
-
view
67 -
download
0
Transcript of 61 Native Install 6.1.0.11.860 Readme First
![Page 1: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/1.jpg)
Patch Readme Information
EMC® Ionix™
ControlCenter®
Version 6.1
Native Installation Packages
Readme for Patch 4960
EMC Corporation
Corporate Headquarters:
Hopkinton, MA 01748-9103
1-508-435-1000
www.EMC.com
![Page 2: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/2.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Contents Overview ............................................................................................................. .3
Patch Conten ts ........................................................................................................................................ 3
Installing agents with UNIX native tools .......................................................... 4
Prerequ is ites ............................................................................................................................. .............. 4
AIX native install interact ive mode....................................................................................................... 4
AIX native install silent mode............................................................................................................... . 6
HP-UX native install interact ive mode ................................................................................................. 8
HP-UX native install silent mode .........................................................................................................10
Linux native install interact ive mode ..................................................................................................11
Linux native install silent mode ...........................................................................................................11
Solaris native install interact ive mode .................................................................................................12
Solaris native install silent mode ..........................................................................................................13
Uninstalling agents with UNIX native tools .................................................... 14
AIX native un install ...........................................................................................................................14
HP-UX native un install ......................................................................................................................15
Linux native un install ........................................................................................................................15
Solaris native un install .......................................................................................................................15
Installing agents with Windows native tools .................................................. 16
In the co mmand syntax.. ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... 1 7
Uninstalling agents with Windows native tools ............................................. 18
In the co mmand syntax.. ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... ... .. ... ... ... .. ... ... ... .. ... ... ... .. ... ... 1 9
2 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 3: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/3.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Overview
Nat ive Tools for UNIX and W indows p lat fo r ms p rov ide an alternat ive method for installing ,
patch ing , un installing , and upgrad ing the fo llowing types of agen ts:
• Master Agent
• Host Agent
• Database Agent for Ora cle
• Common Mapping Agent
• Symmetrix SDM Agent
• Storage Agent for Sy mmetrix
NOTE: For agent compatibility on each platform refer to Support Matrix.
Patch Contents
The download file: CC_ 4960.zip contains the following files.
Native_agents-Win32_6.1.0.11.860.exe
Native_agents-SunOS-sparc_v6.1.0.11.860.tar.gz
Native_agents-SunOS-i86-64_v6.1.0.11.860 .tar.gz
Native_agents-Linux_v6.1.0.11.860 .tar.gz
Native_agents-HPUX_v6.1.0.11.860 .tar.gz
Native_agents-AIX_v6.1.0.11.860.tar.gz
61_native_install_6.1.0.11.860_readme_first.pdf – this document
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 3
![Page 4: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/4.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Installing agents with UNIX native tools
Installing agents with a Nat ive Installer is a one step process. The agent gets installed on the
target host using the Nat ive Installer and upon start-up is automat ically d iscovered and added to
the Contro lCenter Repos ito ry .
The interact ive and silent modes of installat ion on the four p lat fo r ms AIX, HP-UX, Linux, and
Solaris are d iscussed in the fo llowing sub -top ics:
• AIX Native Install Interact ive Mode
• AIX Native Install Silen t Mode
• HP- U X Native Install Interact ive Mode
• HP- U X Native Install Silent Mode
• Linux Native Install Interact ive Mode
• Linux Native Install Silent Mode
• Solaris Nat ive Install In teract ive Mode
• Solaris Nat ive Install Silent Mode
Prerequisites
You must have EMC Contro lCenter 6.1 UB11 installed before you atte mpt to install the agen ts
using the native install methods .
The native install agent included with Patch CC_4960.zip will be at Contro lCenter 6.1 vers ion
6.1.0.11.860.
Download the Cont ro lCenter 6.1 Nat ive Installers from the EMC Powerlink website (regist rat ion
requ ired ) at : http ://Powerlink. EMC. co m.
AIX native install interactive mode
To install agents on AIX in the interact ive mode:
1. While logged in as root, enter the fo llowing command , specify ing the mount po int as an
argu ment:
install_native.sh <mount_point>
For exa mple:
./install_native.sh /usr/cc61native
The program d isp lays the fo llowing message:
Log File is located at <ECC root
directory>/install_native.log
4 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 5: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/5.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
2. Enter the requested system data .
ECC Server's Host FQDN or IP address[]:
• If you enter the hostna me, the IP address is not requ ired . EMC
reco mmends that you enter the hostna me.
• If you enter an IP address, you will be p ro mpted to enter the ECC Server
hostna me.
ECC Server's Hostname[]:
3. Accept the defau lt values for the fo llowing p ro mpts (if co rre ct ):
ECC Server’s Port [5799]:
ECC Secure Server Port [10799]:
Master Agent's Listening Port [5798]:
The program d isp lays the fo llowing message:
Input Verification:
Are all inputs above acceptable [Y|N|Q]: Note:
The installation program does not validate the
ControlCenter Server Hostname and Port numbers. Ensure
that you enter the correct values.
4. Res pond with one of the fo llowing :
• Y, to tell the installat ion p rogram to write the configurat ion files with the
specified values .
• N, to tell the installat ion p rogra m not to write the configurat ion files. The
progra m will p ro mpt you for new values.
• Q, to quit the p rogra m without writ ing configurat ion files or p ro mpt ing fo r
new data .
5. The program d is p lays the fo llowing mess age:
Do you want to install EMC ControlCenter Host Agent [Y|N]:
6. Res pond with one of the fo llowing :
• Y, to tell Contro lCenter you want to install a Host Agen t .
• N, to tell Contro lCenter you do not want to install a Host Agen t .
7. The program d is p lays the fo llowing mess age:
Do you want to install EMC ControlCenter Oracle Database
Agent [Y|N]:
8. Res pond with one of the fo llowing :
• Y, to tell Contro lCenter you want to install an Oracle DB A gent .
• N, to tell Contro lCenter you do not want to install an Oracle DB Agent .
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 5
![Page 6: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/6.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
9. The program d is p lays the fo llowing mess age:
Do you want to install EMC ControlCenter Symmetrix
Agent[Y|N]:
10. Respond with one o f the fo llowing:
• Y, to tell Contro lCenter you want to install the Storage Agent for Sy mmetrix.
• N, to tell Cont ro lCenter you do not want to install the Storage Agent fo r
Sy mmetrix.
11. The program d is p lays the fo llowing message:
Do you want to install EMC ControlCenter Symmetrix SDM
Agent[Y|N]:
12. Respond with one o f the fo llowing:
• Y, to tell Contro lCenter you want to install the Symmetrix SDM Agent .
• N, to tell Contro lCenter you do not want to install the Symmetrix SDM Agent .
13. The program d is p lays the fo llowing :
NativeAgent Target FileSystem ..... /usr
Disk Space Detected ...............
Disk Space Required (minimum) .....
Installing Master Agent ...
Installing Host Agent ...
Installing Oracle Agent ...
Installing Symmetrix Agent...
Installing Symmetrix SDM Agent ...
Installation is complete.
Please refer to <ECC root directory>/install_native.log for
any issues with the installation.
AIX native install silent mode
While logged in as root, enter the fo llowing command , specify ing the mount po int as an
argu ment:
install_native.sh <mount point> [-s <silent-install-file>]
For exa mple:
./install_native.sh /usr/cc61native -s /tmp/SilentAIX.txt
The installat ion p roceeds and completes using the parameters specified in the SilentAIX.txt
file. If a part icu lar parameter is not used by the AIX operat ing system it is skipped.
6 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 7: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/7.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
AIX s ilent install file para meters with example values
Note: Accept the default ECC_PATH value as all ControlCenter Agents on an AIX host must be
installed under /usr/ecc.
ECC_PATH=/usr/ecc
ECC_SERVER_HOSTIP=172.23.134.094
ECC_SERVER_HOST=FQDN lglob094.lss.emc.com
ECC_SERVER_PORT=5799
ECC_SECURE_PORT=10799
ECC_MASTER_PORT=5798
ECC_MASTER_STARTUP=Y
[Optional Agents]
ECC_HOST_AGENT=Y
ECC_ORACLE_AGENT=Y
ECC_SYM_AGENT=Y
ECC_SDM_AGENT=Y
Notes:
• The ECC_SERVER_HOSTIP parameter can contain the IP Address for a NAT installat ion
or E c cServerFQD N
• The installat ion p rogram does not validate the p rov ided values in the Silent Install file .
Ensure that you enter the correct values .
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 7
![Page 8: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/8.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
HP-UX native install interactive mode
To install agents on HP-UX in the interact ive mode:
1. While logged in as root, enter the following command, specify ing the mount po int as an
argu ment:
install_native.sh <mount_point>
For exa mple:
./install_native.sh /usr/cc61native
2. The installat ion script p ro mpts for the root Contro lCenter installat ion directo ry .
Please enter ECC root directory[]:
3. Enter the directo ry where you intend to install all Contro lCenter Agents. Accept the
defau lt of /us r/ec c or enter another d irecto ry path and name, bearing the fo llowing in
mind:
• Do not include spaces in the path (for example, the fo llowing d irecto ry path is
not valid: /EMC So ftware/ec c).
• Do not specify only the root d irecto ry (for example, the fo llowing directo ry
path is not valid: /).
4. The p rogram d isp lays the fo llowing message:
Log File is located at <ECC root
directory>/install_native.log
5. Enter the requested system data .
ECC Server's Host FQDN or IP address[]:
• If you enter the hostna me, the IP address is not requ ired . EMC
reco mmends that you enter the hostna me.
• If you enter an IP address, you will be p ro mpted to enter the ECC Server
hostna me.
ECC Server's Hostname[]:
6. Accept the defau lt values for the fo llowing p ro mpts (if co rrect ):
ECC Server’s Port [5799]:
ECC Secure Server Port [10799]:
Master Agent's Listening Port [5798]:
Note: The installation program does not validate the provided ECC Server
Hos tname and Port numbers.
8 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 9: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/9.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Ensure that you enter the correct values. The p rogram d isp lays the fo llowing message:
Input Verification:
Are all inputs above acceptable [Y|N|Q]:
7. Respond with one of the fo llowing:
• Y, to tell the installat ion p rogram to write the configurat ion files with the
specified values .
• N, to tell the installat ion p rogram not to write the configurat ion files. The
progra m will p ro mpt you for new values.
• Q, to quit the program withou t writ ing configurat ion files or prompt ing fo r
new data .
If you enter Y, the installat ion p rogra m d isp lays the fo llowing:
Do you want EMC ControlCenter Master Agent to start on reboot
[Y|N]:
8. Respond with one of the fo llowing:
• Y, to tell Con tro lCenter to start the Master Agent on reboot (Cont ro lCen ter
updates the rc.d entries with the eccmad script, which starts and stops the
Master Agent ).
• N, to tell Contro lCenter not to start the Master Agent on reboot .
9. The program d isp lays the fo llowing message:
Do you want to install EMC ControlCenter Host Agent [Y|N]:
10. Res pond with one of the fo llo wing :
• Y, to tell Contro lCenter you want to install a Host Agen t .
• N, to tell Contro lCenter you do not want to install a Host Agen t .
11. The program d is p lays the fo llowing message:
Do you want to install EMC ControlCenter Oracle Database
Agent [Y|N]:
12. Res pond with one of the fo llo wing :
• Y, to tell Contro lCenter you want to install an Oracle DB A gent .
• N, to tell Contro lCenter you do not want to install an Oracle DB Agent .
13. The program d is p lays the fo llowing message:
Do you want to install EMC ControlCenter Symmetrix
Agent[Y|N]:
14. Res pond with one of the fo llo wing :
• Y, to tell Contro lCenter you want to install the Storage Agent for Sy mmetrix.
• N, to tell Cont ro lCenter you do not want to install the Storage Agent fo r
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 9
![Page 10: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/10.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Sy mmetrix.
15. The program d is p lays the fo llowing message:
Do you want to install EMC ControlCenter Symmetrix SDM
Agent[Y|N]:
16. Res pond with one of the fo llo wing :
• Y, to tell Contro lCenter you want to install the Symmetrix SDM Agent .
• N, to tell Contro lCenter you do not want to install the Symmetrix SDM Agent .
17. The program d is p lays the fo llowing:
NativeAgent Target FileSystem ..... /usr
Disk Space Detected ...............
Disk Space Required (minimum) .....
Installing Master Agent ...
Installing Host Agent ...
Installing Oracle Agent ...
Installing Symmetrix Agent
Installing Symmetrix SDM Agent
Installation is complete.
Please refer to <ECC root directory>/install_native.log for
any issues with the installation.
HP-UX native install silent mode
While logged in as root, enter the fo llowing command , specify ing the mount po int as an
argu ment:
install_native.sh <mount point> [-s <silent-install-file>]
For exa mple: ./install_native.sh /usr/cc61native -s /tmp/SilentHP-UX.txt
The installat ion p roceeds and completes using the para meters specified in the SilentHP-
UX.txt file. If a part icu lar parameter is not used by the HP-UX operat ing system, it is s kipped.
The parameters of HP-UX Silent Install File are same as that of AIX Silent Install File . You can
refer to AIX Silent Install File Para meters with Example Values to get a glimpse of HP-UX Silent
Install File Parameters with example values .
10 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 11: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/11.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Linux native install interactive mode
To install agents on Linux in the interact ive mode:
1. While logged in as root, enter the following command, specify ing the moun t point as an
argu ment:
install_native.sh <mount_point>
For exa mple:
./install_native.sh /usr/cc61native
2. Perfo rm the installat ion steps 1 to 9 d iscussed in HP-U X Nat ive Install In teract ive Mode.
3. The program d isp lays the fo llowing:
NativeAgent Target FileSystem ..... /
Disk Space Detected ...............
Disk Space Required (minimum) .....
Installing Master Agent ...
Installing Host Agent ...
Installation is complete.
Please refer to <ECC root directory>/install_native.log for
any issues with the installation.
Linux native install silent mode
While logged in as root, enter the fo llowing command , specify ing the mount point as an
argu ment:
install_native.sh <mount point> [-s <silent-install-file>]
For exa mple: ./install_native.sh /usr/cc61native -s /tmp/SilentLinux.txt
The installat ion p roceeds and completes using the parameters specified in the
SilentLinux.txt file. If a part icu lar parameter is not used by the Linux operat ing system, it is
skipped.
The parameters of Linux Silent Install File are same as that of AIX Silent Install File . You can
refer to AIX Silent Install File Para meters with Example Values to get a glimpse of Linux Silent
Install File Parameters with example values .
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 11
![Page 12: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/12.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Solaris native install interactive mode
To install agents on Solaris in the interact ive mode:
1. While logged in as root, enter the following command, specify ing the moun t point as an
argu ment:
install_native.sh <mount_point>
For exa mple:
./install_native.sh /usr/cc61nativ
2. Perfo rm the installat ion steps 1 to 11 d is cussed in HP-U X Nat ive Install Interact ive Mode.
3. The program d isp lays the fo llowing message:
Do you want to install EMC ControlCenter Common Mapping Agent
[Y|N]:
4. Respond with one of the fo llowing:
• Y, to tell Contro lCenter you want to install a Common Mapping Agent .
• N, to tell Contro lCenter you do not want to install a Common Mapping Agent .
5. The program d isp lays the fo llowing message:
Do you want to install EMC ControlCenter Symmetrix
Agent[Y|N]:
6. Respond with one of the fo llowing:
• Y, to tell Contro lCenter you want to install the Storage Agent for Sy mmetrix.
• N, to tell Cont ro lCenter you do not want to install the Storage Agent fo r
Sy mmetrix.
7. The program d isp lays the fo llowing message:
Do you want to install EMC ControlCenter Symmetrix SDM
Agent[Y|N]:
8. Respond with one of the fo llowing:
• Y, to tell Contro lCenter you want to install the Symmetrix SDM Agent .
• N, to tell Contro lCenter you do not want to install the Symmetrix SDM Agent .
9. The program d isp lays the fo llowing:
NativeAgent Target FileSystem ..... /
Disk Space Detected ...............
Disk Space Required (minimum) .....
Creating admin file...
Installing Master Agent ...
Installing Host Agent ...
12 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 13: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/13.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Installing Oracle Agent ...
Installing Common Mapping Agent
Installing Symmetrix Agent
Installing Symmetrix SDM Agent
Installation is complete.
Please refer to <ECC root directory>/install_native.log for
any issues with the installation.
Solaris native install silent mode
While logged in as root, enter the fo llowing command , specify ing the mount point as an
argu ment:
install_native.sh <mount point> [-s <silent-install-file>]
For exa mple: ./install_native.sh /usr/cc61native -s /tmp/SilentSunOS.txt
The installat ion p roceeds and completes using the parameters specified in the
SilentSunOS.txt file. If a part icu lar parameter is not used by the Solaris operat ing system, it is
skipped.
The parameters of Solaris Silent Install File are same as that of AIX Silent Install File. You can
refer to AIX Silent Install File Para meters with Example Values to get a glimpse of Solaris Silent
Install File Parameters with example values .
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 13
![Page 14: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/14.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Uninstalling agents with UNIX native tools
Uninstalling agents with a Nat ive Installer is a two step process. The agent must first be
un installed th rough the Cont ro lCenter Console in order to re move it from the Contro lCenter
Repos ito ry. Then, it can be un installed from the target host using the appropriate Nat ive Too l
(installp, s wremove, rpm, or pkgr m).
Co mmon steps for uninstall ing
Perfo rm the fo llowing common steps:
1. Un install agents th rough the Contro lCenter Conso le .
2. Make sure all agents are stopped on the agent host by going to the Master Agent
directo ry and using the eccmad stop all agents command:
cd /usr/ecc/exec
./eccmad stopall
Note: Alw ays unins tall the Master agent last.
The above steps are common for un installing Agents in any p lat fo rm. The re main ing steps vary
depend ing upon the plat fo r m.
AIX native uninstall
Complete these steps after the perfo r ming the common steps for un installing d is cuss ed at the
beg inn ing of this chapter:
1. Run the fo llowing command to un install the Database Agent for Ora cle:
installp -u ECCAGENTS.ORACLE
2. Run the fo llowing command to un install the Host Agen t:
installp -u ECCAGENTS.HOST
3. Run the fo llowing command to un install the Storage Agent for Sy mmetrix:
installp -u ECCAGENTS.SYMMETRIX
4. Run the fo llowing command to un install the Symmetrix SDM Agent :
installp -u ECCAGENTS.SDM
5. Run the fo llowing command to un install the Master Agen t:
installp -u ECCAGENTS.MASTER
14 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 15: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/15.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
HP-UX native uninstall
Complete these steps after the perfo r ming the common steps for un installing d is cuss ed at the
beg inn ing of this chapter:
1. Run the fo llowing command to un install the Database Agent for Ora cle:
swremove ECC_OAGENT
2. Run the fo llowing command to un install the Host Agen t:
swremove ECC_HAGENT
3. Run the fo llowing command to un install the Storage Agent for Sy mmetrix:
swremove ECC_SAGENT
4. Run the fo llowing command to un install the Symmetrix SDM Agent :
swremove ECC_DAGENT
5. Run the fo llowing command to un install the Master Agen t:
swremove ECC_MAGENT
Linux native uninstall
Complete these steps after the perfo r ming the common steps for un installing d is cuss ed at the
beg inn ing of this chapter:
1. Run the fo llowing command to un install the Host Agen t:
rpm -e hagent
2. Run the fo llowing command to un install the Master Agen t:
rpm -e magent
Solaris native uninstall
Complete these steps after the perfo r ming the common steps for un installing d is cuss ed at the
beg inn ing of this chapter:
1. Run the fo llowing command to un install the Database Agent for Ora cle:
pkgrm OAGENT
2. Run the fo llowing command to un install the Common Mapping Agent:
pkgrm CAGENT
3. Run the fo llowing command to un install the Host Agen t:
pkgrm HAGENT
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 15
![Page 16: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/16.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
4. Run the fo llowing command to un install the Storage Agent for Sy mmetrix:
pkgrm SAGENT
5. Run the fo llowing command to un install the Symmetrix SDM Agent :
pkgrm DAGENT
6. Run the fo llowing command to un install the Master Agen t:
pkgrm MAGENT
Installing agents with Windows native tools
To install any or all of the above agents from a command prompt on a W indows host, download
the Contro lCenter 6.1 Nat ive Installer from the EMC Powerlink website (reg ist rat ion requ ired) at:
http ://Powerlink. EMC. co m
To install agents on Windows :
1. Create a fo lder to download to, for example: C:\ecc\WinNativeInstall
2. Download the W indows Nat ive Tools folder to the folder created in Step 1 (for exa mple,
WinNat iveInstall).
3. Open a Co mmand Prompt and go to the folder created in Step 1 (for exa mple,
WinNat iveInstall):
cd <WinNativeInstall folder>
Note: In the Steps 4 th rough 7 lines in [b rackets] are opt ional, all other lines are requ ired.
4. Run Nat ive_agents-W in32_6.1.0.11.860.exe as follows to install the Master and all Sub
Agents:
Native_agents-Win32_6.1.0.11.860.exe /s /v"/qn
CMDLINE=true INSTALLDIR=<EccInstallRoot>
SERVERHOSTNAME_ORIP=<EccServerFQDN or IP Address for a
NAT installation>
SERVERHOSTNAME_NAME=<EccServerHostName>
[SERVER_PORT=<Port#>]
[SECURE_SERVER_PORT=<Port#>]
[MAPORT=<Port#>]
INSTALLHOSTAGENT=true
INSTALLORACLEAGENT=true
INSTALLCMAAGENT=true
INSTALLSYMMETRIXAGENT=true
16 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 17: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/17.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
INSTALLSDMAGENT=true
/L* <LogOutputFile>"
Note: The exe file name will be d ifferent for d ifferent Nat ive Install Package.
Exa mple fo r Master Agent and Host Agent
Native_agents-Win32_6.1.0.11.860.exe/s /v"/qn
CMDLINE=true
INSTALLDIR=e:\ecc
SERVERHOSTNAME_ORIP=cc61-infra-lab.cse.cee.com
SERVERHOSTNAME_NAME=cc61-infra-lab.cse.cee.com
INSTALLHOSTAGENT=true /L* e:\ecc-agent-install.log"
Exa mple fo r Master, Hos t, Sy mmetrix and SDM Agent.
Native_agents-Win32_6.1.0.11.860.exe /s /v"/qn
CMDLINE=true
INSTALLDIR=e:\ecc
SERVERHOSTNAME_ORIP=cc61-infra-lab.cse.cee.com
SERVERHOSTNAME_NAME=cc61-infra-lab.cse.cee.com
INSTALLHOSTAGENT=true INSTALLSYMMETRIXAGENT=true
INSTALLSDMAGENT=true /L* e:\ecc-agent-install.log"
In the command syntax
• CMD LI NE must be specified as t rue .
• INSTALLDI R is the root d irecto ry where the agents are to be installed. This parameter is
requ ired.
• SERVERHOST NAME_O RIP is the ECC Server FQDN or ECC Server IP address. Th is
para meter is requ ired.
• SERVERHOSTNAME_NAME is the ECC Server Hostname. This parameter is requ ired.
• SERVER_PORT is the ECC Server Listen ing Port number. The defau lt value is 5799. Th is
para meter is opt ional—if not specified, the defau lt value is used.
• SECURE_SERVER_PORT is the ECC Server Secure Listen ing Port number. The defau lt
value is 10799. This parameter is optional—if not specified , the defau lt value is used.
• MAP ORT is the Master Agent Listen ing Port number. The defau lt value is 5798. Th is
para meter is opt ional—if not specified, the defau lt value is used.
• INSTALLH OSTA GENT ind icates that the W indows Host Agent is to be installed . Th is
para meter is opt ional—if not specified, the defau lt value (false) is used.
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 17
![Page 18: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/18.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
• INSTALLO RACLEA GENT ind icates that the Windows Database Agent for Oracle is to
be installed . Th is para meter is opt ional—if not specified, the defau lt value (false) is used.
• INSTALLCMAA GENT ind icates that the Windows Common Mapping Agent is to be
installed . Th is para meter is opt ional—if not specified , the defau lt value (false) is used.
• INSTALLS YMMETRI XA GENT ind icates that the Storage Agent for Symmetrix is to be
installed . Th is parameter is optional—if not specified , the defau lt value (false) is used.ing
Nat ive Tools to Install and Un install Agents
• INSTALLS DMA GENT ind icates that the Symmetrix SDM Agent is to be installed . Th is
para meter is opt ional—if not specified, the defau lt value (false) is used.
• [/L*] ind icates that Nat ive_agents-W in32_6.1.0.11.860.exe is to create a log file
(<LogOutputFile>) that describes its p rogress .
• <LogOutputFile> is the location of the log file for Nat ive_agents-Win32_6.1.0.11.860.exe .
The directo ry must exist in the file system before you enter the command . Messages that
would normally appear in dialog boxes du ring interact ive installat ion will be p refixed
with the fo llowing string: ECC_LOG_MESSA GE. For example: C:\ecc\e c c_test ing .log .
Uninstalling agents with Windows native tools
1. Un install agents th rough the Contro lCenter Conso le .
2. Make sure the Master Agent Service is stopped and the W indows Services window is
closed.
3. Go to a Command Prompt in the W inNat iveInstall fo lder:
cd <WinNativeInstall folder>
4. Run setup.exe as follows to un install the Master and all Sub Agents:
setup.exe /s /v"/qn CMDLINE=true REMOVE=ALL
/L* <LogOutputFile>"
5. Run setup.exe as follows to un install just the Host Agent:
setup.exe /s /v"/qn CMDLINE=true REMOVE=Host
/L* <LogOutputFile>"
6. Run setup.exe as follows to un install just the Oracle Agent :
setup.exe /s /v"/qn CMDLINE=true REMOVE=Oracle
/L* <LogOutputFile>"
7. Run setup.exe as follows to un install just the CMA Agent:
setup.exe /s /v"/qn CMDLINE=true REMOVE=CMA
/L* <LogOutputFile>"
8. Run setup.exe as follows to un install just the Storage Agent for Sy mmetrix:
18 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960
![Page 19: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/19.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
setup.exe /s /v"/qn CMDLINE=true REMOVE=Symmetrix
/L* <LogOutputFile>"
9. Run setup.exe as fo llows to un install just the Symmetrix SDM Agen t:
setup.exe /s /v"/qn CMDLINE=true REMOVE=SDM
/L* <LogOutputFile>"
In the command syntax
• [/L*] ind icates that setup.exe is to create a log file (<LogOutpu tFile>) that describes its
p rogress .
• <LogOutputFile> is the location of the log file for setup .exe. The d irecto ry must exist in
the file system before you enter the command . Messages that wou ld nor mally appear in
dialog boxes du ring interact ive installat ion will be prefixed with the following st ring :
E CC_ LOG_M ESSAGE.
For example: C:\ecc\ecc_testing.log
EMC Ionix Contro lCenter 6.1 Readme for Patch 4960 19
![Page 20: 61 Native Install 6.1.0.11.860 Readme First](https://reader037.fdocuments.in/reader037/viewer/2022100315/544b23b1af7959a8438b4fec/html5/thumbnails/20.jpg)
EMC Ionix Contro lCenter 6.1 Read me for Patch 4960
Copyright © 2011 EMC Corporation. All rights reserved.
Published August, 2011
EMC believes the info rmation in this publication is accurate as of its publication date. The info rmation is
subject to change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED ―AS IS.‖ EMC CORPORATION
MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND W ITH RESPECT TO THE
INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publicat ion requires an applicable
software license.
For the most up-to-date listing of EMC product names, see EMC Corporation Trademarks on EMC.com.
All other trademarks used herein are the property of their respective owners.
20 EMC Ionix Contro lCenter 6.1 Readme for Patch 4960