603 POLYURETHANE

วัสดุอดุรอยตอประเภทโพลียูรีเทน

LANKO 603 POLYURETHANE

Application Method

Page 1/2 May 2006

603 POLYURETHANE

Application range

603 POLYURETHANE is a one component polyurethane sealant for sealing expansion joint, construction joint, crack, door and window frame, pre-cast panel, sanitary ware or grouting tiles, roof tiles.

Joint preparation

• Maximum movement capacity for sealant used in the building industry rises to 25%

• Recommended dimensions for joints are

Width (W) : 5-50 mm. Depth (D) : 5-25 mm.

If width ≤ 10 mm. then D = W If width > 10 mm. then D = W/2

Joint with are expected to experience cyclical movement should have a width to depth ratio 2: 1

• Damage must be repaired prior to application, using a

mortar with 751 LANKOLATEX or 731 LANKOREP STRUCTURE.

• Joint must be very clean, sound, dry, dust-free and without any traces of oil, laitance, paints and curing compound.

• A bond breaker such as masking tape and round polyethylene foam (LANKO FONDS DE JONTS backing rod) should be sued to ensure that the joint maintains a movement and to reduce the depth of the joint to be filled.

• The excellent adhesion quality of 603 POLYURETHANE generally make a primer unnecessary. However, if the inside joint surfaces are porous a primer coat should be applied.

Product and tool preparation

310 ml. Cartridge

• Remove the seaming at the base of the cartridge.

• Pierce the top part of the threaded end of the cartridge.

• Screw on the plastic tip and cut diagonally as required • Depress thumb release plate of the handy gun and

withdraw push rod. • Insert the cartridge. Ensure

secure placement within end ring.

• Move push rod hard against cartridge plunger. Cartridge should be firmly in place.

• Depress trigger to commence gunning.

600 ml. Sausage

• Depress thumb release plate of the barrel gun and withdraw “T” push rod.

• Turn front-end cap anticlockwise. Put the nozzle Insert the sachet into the barrel gun. Cut off exposed end of sachet. Ensure sachet is well opened and that no cellophane extends beyond sealant to clog nozzle.

• Attach front-end cap to barrel with a clockwise turn. • Cut the nozzle as required and depress trigger to

commence gunning.

Bond breaker

603 POLYURETHANE W

D

/2 May 2006

The information provided in this document results from our knowledge of the products and our experiences. On-site result may vary, in particular according to the product application methods adopted. Where application methods not covered by this document and used, customers must request specific additional information and/or carry out a representative test before using the products. The above-mentioned information in no way constitutes a warranty relative to the use of the products.

ParexDavco (Thailand) Co.,Ltd. 3rd Floor Lumpini II Building 247 Sarasin Road, Lumpini, Pathumwan, Bangkok 10330 Telephone: 66(0)2 651 9838 Facsimile: 66(0)2 651 8003 Website: Parexdavco.com.

603 POLYURETHANE

Application

• Squeeze out one or more beads depending on the width of the joint to be filled.

• Once the sealant has been applied a small timber spatula or finger soaked in soapy water shall be used to compact the sealant into the joints and to achieve a smooth finish.

• Any masking tape applied should be removed before the sealant cures.

Consumption

• One 310 ml. Cartridge fills a 3-m long of 1×1 cm. gap. • One 600 ml. Sausage fills a 6-m. long of 1x1 cm. gap.

Precautions

• Do not breathe vapors of fumes. • Avoid contact with eyes and skin. • Use only with adequate ventilation. • Wash thoroughly after handing.

Remarks

• For characteristics, please see the catalogue. • For safety matter, please see the material safety data

sheet.

of 3

Date of Issue: November 2003

3TH FL. Lumpini II Building, 247 Sarasin Rd., Pathumwan, Bangkok 10330 THAILAND.

Tel : 66(0)2651-9838 Fax : 66(0)2651-8003 www.ParexDavco.com.

MATERIAL SAFETY DATA SHEET

Davco Construction Materials (Thailand) Co.,Ltd.

IDENTIFICATION PRODUCT NAME:


UN No: Not allocated

OTHER NAMES: Not relevant DANGEROUS GOODS CLASS: Not allocated

SUBSIDIARY RISK: Not allocated

HAZCHEM CODE: Not allocated

POISON SCHEDULE: Not allocated

USE: Packed in 310 ml cartridges and 600 ml sausage. Elastomeric joint sealant for expansion joints in concrete structures

etc.

PHYSICAL PROPERTIES APPEARANCE: Highly thixotropic, tacky material in various

colours. Cured by reaction with moisture in the air to an elastic rubber like material.

FLAMMABILITY

LIMITS %:

UEL Not applicable

LEL Not applicable

BOILING POINT: Not applicable FLASHPOINT, (Closed Cup): Not applicable

VAPOUR PRESSURE: Not determined SOLUBILITY IN WATER: Insoluble, but reacts slowly with water

SPECIFIC GRAVITY: 1.17

INGREDIENTS

CHEMICAL NAME

CAS No.

PROPORTION

% (w/w)

3 Isocyanatemethyl-3,5,5-Trimethylcyclohexyl isocyanate 1098-71-9 0.1-1%

Xylene 1330.-20-7 2.5-10%

Ethyl Benzene 100-41-4 1-2.5%

Non hazardous ingredients To 100%

of 3

Product Name: LANKO 603 POLYURETHANE


HEALTH HAZARD INFORMATION HEALTH EFFECTS - ACUTE

SWALLOWED: Harmful, seek medical advice.

EYE: Irritant, seek medical advice.

SKIN: Mild irritant due to solvent, avoid contact.

INHALED: No hazard in general use, good ventilation required in confined spaces.

HEALTH EFFECTS – CHRONIC Potential skin sensitiser due to xylene

FIRST AID SWALLOWED: Do not induce vomiting, seek medical attention.

EYE: Immediately hold eye open, wash with copious quantities of water for at least 15 minutes and seek medical attention.

SKIN: Remove affected clothing and thoroughly wash affected are with soap and water.

INHALED: Not normally a hazard but if overcome, remove for fresh air and resuscitate as necessary, seek medical attention.

ADVICE TO DOCTOR In all cases of ingestion, seek advice from 0800 734 607

PRECAUTIONS FOR USE ENGINEERING CONTROLS: Local ventilation not normally necessary but should be considered if used in poorly ventilated or very

confined spaces. Alternatively a respiratory protection mask fitted with type A1 filter and complying with AS 1716.

Respiratory Devices and used in accordance with AS 1715 which describes use and maintenances.

PERSONAL PROTECTION EYES: Chemical goggles, safety glasses or full-face shield.

Do not store or consume food, drink or tobacco in an area where they may become contaminated with this material. Wash thoroughly before eating, smoking, applying cosmetics etc.

FLAMMABILITY Not flammable under conditions of use in well ventilated areas. The product will burn if exposed to direct flame. A fire will cause the decomposition of the poly urethane causing the production of carbon dioxide, carbon monoxide, hydrogen chloride and oxides of nitrogen. Under certain combustion conditions , traces of hydrogen chloride gas may be generated, Self contained breathing apparatus is recommended when fighting fires involving large quantities of LANKO 603 POLYURETHANE.

SAFE HANDLING INFORMATION STORAGE AND TRANSPORT

STORAGE AND TRANSPORT

Storage between 0°C and 30°C is recommended. Above 45°C material may polymerize without hazard. Protect from moisture and extremes of temperature.

SPILLS AND DISPOSAL Not of spillable consistency. Clean up with cloth or tissue moistened with white spirits or allow to cure and remove mechanically . Dispose of at an approved landfill waste disposal site when fully cured.

FIRE / EXPLOSION HAZARD EXTINGUISHING MEDIA:

Fight fires with foam, CO2 , or dry chemical extinguishers. Do not use water. Produces oxides of nitrogen and under certain combustion conditions, traces of hydrogen cyanide could be evolved.

of 3

Product Name: LANKO 603 POLYURETHANE


OTHER INFORMATION Persons known to be hypersensitive (asthma, chronic bronchitis) should not use this product.

CONTACT POINT Technical Services Telephone: 66(0)2651-9838

Fax: 66(0)2650-2847

The information in this document is given to provide details of known hazards and is prepared from sources believed reliable, and can only be used for safety and health purposes. The Company makes no warranty that it is in all cases correct and sufficient. Prepared along Worksafe Guidelines. This Material Safety Data Sheet can only be copied in its entirety without any alterations.

of 3

Date of Issue: January 2003

5TH FL. Lumpini II Building, 247 Sarasin Rd., Pathumwan, Bangkok 10330 THAILAND. Tel : 66(0)2651-9027-36, Fax : 66(0)2651-8003 E-Mail : [email protected]

MATERIAL SAFETY DATA SHEET

Davco Construction Materials(Thailand)Co.,ltd.

IDENTIFICATION PRODUCT NAME:


UN No: Not allocated OTHER NAMES: Not relevant DANGEROUS GOODS CLASS: Not allocated SUBSIDIARY RISK: Not allocated

HAZCHEM CODE: Not allocated

POISON SCHEDULE: Not allocated

USE: Packed in 310 ml cartridges and 600 ml sausage. Elastomeric joint sealant for expansion joints in concrete structures etc.

PHYSICAL PROPERTIES APPEARANCE: Highly thixotropic, tacky material in various

colours. Cured by reaction with moisture in the air to an elastic rubber like material.

FLAMMABILITY LIMITS %:

UEL Not applicable

LEL Not applicable BOILING POINT: Not applicable FLASHPOINT, (Closed Cup): Not applicable VAPOUR PRESSURE: Not determined SOLUBILITY IN WATER: Insoluble, but reacts slowly

with water SPECIFIC GRAVITY: 1.17

INGREDIENTS

CHEMICAL NAME

CAS No.

PROPORTION % (w/w)

3 Isocyanatemethyl-3,5,5-Trimethylcyclohexyl isocyanate 1098-71-9 0.1-1% Xylene 1330.-20-7 2.5-10% Ethyl Benzene 100-41-4 1-2.5% Non hazardous ingredients To 100%

of 3

Product Name: Lanko 603 Polyurethane


HEALTH HAZARD INFORMATION HEALTH EFFECTS - ACUTE

SWALLOWED: Harmful, seek medical advice. EYE: Irritant, seek medical advice. SKIN: Mild irritant due to solvent, avoid contact. INHALED: No hazard in general use, good ventilation required in confined spaces.

HEALTH EFFECTS – CHRONIC Potential skin sensitiser due to xylene

FIRST AID SWALLOWED: Do not induce vomiting, seek medical attention. EYE: Immediately hold eye open, wash with copious quantities of water for at least 15 minutes and seek medical

attention. SKIN: Remove affected clothing and thoroughly wash affected are with soap and water. INHALED: Not normally a hazard but if overcome, remove fo fresh air and resuscitate as necessary, seek medical

attention.

ADVICE TO DOCTOR In all cases of ingestion, seek advice from 0800 734 607

PRECAUTIONS FOR USE ENGINEERING CONTROLS: Local ventilation not normally necessary but should be considered if used in poorly ventilated or very

confined spaces. Alternatively a respiratory protection mask fitted with type A1 filter and complying with AS 1716. Respiratory Devices and used in accordance with AS 1715 which describes use and maintenances.

PERSONAL PROTECTION EYES: Chemical goggles, safety glasses or full-face shield. Do not store or consume food, drink or tobacco in an area where they may become contaminated with this material. Wash thoroughly before eating, smoking, applying cosmetics etc.

FLAMMABILITY Not flammable under conditions of use in well ventilated areas. The product will burn if exposed to direct flame. A fire will cause the decomposition of the poly urethane causing the production of carbon dioxide, carbon monoxide, hydrogen chloride and oxides of nitrogen. Under certain combustion conditions , traces of hydrogen chloride gas may be generated, Self contained breathing apparatus is recommended when fighting fires involving large quantities of LANKO 603 POLYURETHANE.

SAFE HANDLING INFORMATION STORAGE AND TRANSPORT

STORAGE AND TRANSPORT

Storage between 0°C and 30°C is recommended. Above 45°C material may polymerize without hazard. Protect from moisture and extremes of temperature.

SPILLS AND DISPOSAL Not of spillable consistency. Clean up with cloth or tissue moistened with white spirits or allow to cure and remove mechanically . Dispose of at an approved landfill waste disposal site when fully cured.

FIRE / EXPLOSION HAZARD EXTINGUISHING MEDIA:

Fight fires with foam, CO2 , or dry chemical extinguishers. Do not use water. Produces oxides of nitrogen and under certain combustion conditions, traces of hydrogen cyanide could be evolved.

of 3

Product Name: Lanko 603 Polyurethane


OTHER INFORMATION Persons known to be hypersensitive (asthma, chronic bronchitis) should not use this product.

CONTACT POINT Technical Services Telephone: 66(0)651 9027-36

Fax: 66(0)2651 8003

The information in this document is given to provide details of known hazards and is prepared from sources believed reliable, and can only be used for safety and health purposes. The Company makes no warranty that it is in all cases correct and sufficient. Prepared along Worksafe Guidelines. This Material Safety Data Sheet can only be copied in its entirety without any alterations.

/1

YEAR 2004

No. Project Name Location Contractor/Applicator Quantity (Kg.)1 BAAN PASSORN Rangsit, Patumthani Preuksa Real Estate Co.,Ltd 13,543

2 SIAM STEEL FACTORY Rayong Siam Steel Service 9,472

3 GOLF COURSE Bangna-Trad KKY Construction Co., Ltd. 2,909

4 THAI SUMMIT Esie, Rayong Thai Nakano Co.,Ltd 2,714

5 BAAN PREUKPIROM Rangsit, Patumthani Kreeta and Associates 1,580

6 MAXXIS Esie, Rayong Fuji Tech/R.K. Union/Rungfah Serm 1,500

7 PRECAST FACTORY Ladlumkaew, Patumthani Post & Precast Co., Ltd 985

8 CELETICA Lamchabang, Chonburi B.S.Y. Construction Co.,Ltd 650

9 PLASTIC FACTORY Singburi Pro Pet (Thailand) Co.,Ltd 600

10 CF FARM C.F. Farm Co.,Ltd 600

11 TIGER Asian IE, Rayong Nachatr Civil Ltd.,Part 505

12 TOC Hemmaraj IE, Rayong Ppec Engineering Ltd.,Part 500

13 EXCELLENT RUBBER Baanbueng, Chonburi Samson Engineering Co.,Ltd 419

14 KASEMRAJ HOSPITAL Nawamin, BKK R.S.B. Waterproof Co., Ltd. 353

15 PTT Maptaphut Rayong YTC Corporation Ltd.,Part 328

16 FUI 1 Sahapat Sriracha Pitakkij Co.,Ltd 220

17 NOK Amata Bangpakong Golden Floor Development 130

18 CE FACTORY Mabkham, Rayong C.E. Industry Services Co.,Ltd 110

LANKO Project References

Davco Construction Materials (Thailand) Co., Ltd.

603POLYURETHANE

Tel: 66(0) 2651 9027-36 - Fax: 66(0) 2651 8003 - Website: www.lanko.com.au.

CertificationAwarded to

PAREXDAVCO (THAILAND) CO.,LTD.

24 MOOA, TUMBOL KHOKYAE, AMPHOE NONGKHAE, SARABURI18230THAILAND

Bureau Veritas Certification certify that the Management System ofthe above organization has been audited and found to be in accordance with

the requirements of the management system standards detailed below

Standards

ISO 9001:2008

Scope of supply

MANUFACTURING OF TECHNICAL MORTARS

Original Approval Date: 17 March 2009

Subject to the continued satisfactory operation of the organization's Management System,

this certificate is valid until: 16 March 2012

To check this certificate validity please call (+6626704800)

Further clarifications regarding thc scope of this certificate and the applicability of the management system requirements

may be obtained by consulting the organization

Date: 17 March 2009

tM: Bureau Veritas Certification

Using the accreditation

certificate number 008~UKAS

QUALITYMAN,'CEMENT

Certificate Numbcr: TH 09000165

CERTIFICATION AlITIIORIIT, Bme", V"i.., Cw'fi,,'o.. m"il.,d) L<d,1I"h FI=" B""k..k Tow", 2170 N,w P",hl",,' Ro,d,B.,.."", 1I"'yk , B.,"'"k 10310, 'lhill.,dMANAGING OFFICE, B""", Veri.., 0"ilI'",'o" (lM.,il) L"I.16<1>Floo" B.,.kok T"w«, 2170 N,w P",hh..ri Ro,d,B""""", 1I..,yk"",., B",.kok 10310, Thill",d

008

603 POLYURETHANE

Documents

Transcript of 603 POLYURETHANE