6000 Series Features - SearchSinger.net · 2017-08-10 · EATON Low Speed High Torque Motors...

C-5-1EATON Low Speed High Torque Motors E-MOLO-MC001-E6 JSeptember 2011

C-5

6000 Series Highlights

DescriptionWith torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.

Features

• 9displacementsavailable

• Presentsamultitudeofoptionsthatmakethismotorvery“smart”andflexible to apply

Benefits

• Verytoughmotorfordemanding applications

• Canbeusedinamulti-tude of industries

• Veryeasy/flexibletointe-grate in a system

Applications

• Mobileequipment

• SnowRemoval,mowing

• Spayer,trencher

• Woodproducts

Sprayer TrencherMowing

SpecificationsGerolerElement 9DisplacementsFlowl/min[GPM] 150[40]Continuous** 225[60]Intermittent*SpeedRPM 775Cont.** 866Inter.*Pressurebar[PSI] 200[3000]Cont.** 300[4500]Inter.*TorqueNm[lb-in] 1685[14920]Cont.** 1875[16580]Inter.*

** Continuous — (Cont.) Continuous rating, motor may be run continuously at these ratings. * Intermittent — (Inter.) Intermittent operation, 10% of every minute.

Snow Removal

EATON Low Speed High Torque Motors E-MOLO-MC001-E6 September 2011C-5-2

6000 SeriesSpecifications

6000 SerieS MotorS

Displ. cm3/r [in3/r] 195 [11.9] 245 [15.0] 310 [19.0] 390 [23.9] 490 [30.0] 625 [38.0] 735 [45.0] 805 [49.0] 985 [60.0]

Max. Speed Continuous 775 615 485 387 307 241 203 187 153 (RPM) Intermittent 866 834 698 570 454 355 303 280 230 @ FlowFlow Continuous 150 [40] 150 [40] 150 [40] 150 [40] 150 [40] 150 [40] 150 [40] 150 [40] 150 [40] l/min [GPM] Intermittent 170 [45] 210 [55] 225 [60] 225 [60] 225[60] 225 [60] 225[60] 225[60] 225 [60]Torque* Continuous 575 [5100] 735 [6510] 930 [ 8230] 1155 [10230] 1445 [12800] 1480 [13100] 1378 [12192] 1582 [14004] 1685 [14920] Nm [lb-in] Intermittent 860 [7620] 1100 [9740] 1355 [11990] 1635 [14490] 1885 [16670] 1898 [16800] 1699 [15040] 1850 [16377] 1875 [16580] Pressure Continuous 205 [3000] 205 [3000] 205 [3000] 205 [3000] 205 [3000] 170 [2500] 140 [2000] 140 [2000] 140 [2000] ∆ bar Intermittent 310 [4500] 310 [4500] 310 [4500] 310 [4500] 275 [4000] 221 [3200] 170 [2500] 170 [2500 140 [2000][∆ PSI] Peak 310 [4500] 310 [4500] 310 [4500] 310 [4500] 310 [4500] 240 [3500] 205 [3000] 170 [2500 170 [2250]Weight Standard or 24,9 [55.0] 25,2 [55.5] 25,6 [56.5] 26,3 [58.0] 27.0 [59.5] 27,9 [61.5] 28.6 [63.0] 29 [64.0] 30,4 [67.0] kg [lb] Wheel Mount Bearingless 20.2 [44.5] 20.4 [45.0] 20.9 [46.0] 21.5 [47.5] 22.2 [49.0] 23.1 [51.0] 28.3 [52.5] 28.8 [53.5] 30.2 [56.5]Maximum Case Pressure: See case pressure seal limitation graph.

*See shaft torque ratings for limitations..

Maximum Inlet Pressure:310bar[4500PSI]Do not exceed ∆ pressure rating (see chart above).

Maximum Return Pressure:310bar[4500PSI]withcasedrain line installed. Do not exceed ∆ pressure rating (see chart above).

∆ bar [∆ PSI] :Thetruepressuredifferencebetween inlet port and outlet port

Continuous Rating:Motor may be run continu-ously at these ratings

Intermittent Operation:10% of every minute

Peak Operation:1% of every minute

Recommended Fluids:Premiumquality,anti-weartype hydraulic oil with a viscosity of not less than 70 SUS at operating tempera-ture.

Recommended System Operating Temp.:-34°Cto82°C[-30°Fto180°F]

Recommended Filtration:perISOCleanlinessCode,4406:20/18/13

Note:Toassurebestmotorlife,run motor for approximately onehourat30%ofratedpressure before application tofullload.Besuremotorisfilled with fluid prior to any load applications.


C-5

35154

85153

180148

[2450]275144

[3280]370131

465119

[320]

[300]

35232

[750]85

230180225

[2480]280221

[3330]375212

[4190]475203

35309

[730]80

307180303

[2470]280300

[3340]375291

[4210 ]475283

[720]80

384

[1590]180379

[2460]2803 74

[3350]380365

[4240]480356

[250] [500] [1000] [1500] [2000] [2500] [3000] [3500] [4000] [4500]15 35 70 105 140 170

[8]

30[12 ]

45[16 ]

61[20]

76

195 cm3/r [11.9 in3/r]

54511 6

[4990]56518 6

[5090]575258

[5100]575332

205

[280]309

[650] [1450]

[1500]

[1500]

[1590]

[1600]

[1610]

757

16 55

[290]

[300]

[310]

[710]

[740]

3538

[680]7537

17 035

[2340] [3100]

[3200]

26534

35030

[3880] [4140]

[4600]

[4810]

[5200]

44026

3577

8076

17 574

[2390]27072

36566

[4030]

[4120]

45562

[.5]

1,9[2]

7,5[4]

15

47018

52046

[5530]62599

[5810 ]655167

[590 0 ]665236

[5950]670306

240

59032

Flo

w L

PM [G

PM]

Torque [lb-in] NmSpeed RPM

}[5790]655702

[6250] [6900]70583

[6630]750148

275 310

[5790]655

18

[700 ]80

462

[1570]175456

[2440]275450

[3330]375440

[4220]475429

[24]

91

[5080]575413

[660]75

539

[1530]175532

[2400]270526

[3300 ]375514

[4200 ]475502

[28]

10 6

[5060]570476

[630]70

617

[1500]170609

[2370]270602

[3270]370589

[4160]470576

[32]

121

[5040]570542

[620]70

692

[1480]165683

[2350]265674

[3240]365659

[4130]465645

[36]

136

[5000]565601

[610 ]70

770

[1450]16 5759

[2320]26074 9

[3210]365733

[4100]465718

[40]

151[1410]

160854

[2280]260843

[3170]360825

[4060]460808

[45]

17 0

[270]30

387[240]

25465

[190]20

542[160]

20620

[120]15

697

78065

[7320]825118

[6710 ]76 0214

[7470]84518 1

[6800]770280

[5940]670388

[5940]670448

[5920]6705 11

[5880]665564

[6810 ]770363

[6810 ]770421

[4960]560666

[5840]660624

[4920]555749

[7620]860247

[6790]765480

[5790]655702

[590]65

866

[80]10

775

[6760]765527

[2290]260

2

[470]55

122

[960]110120

[2060]23511 6

[3150]35511 3

[42 10 ]47510 4

[5260]59595

[480]55

18 3

[970]11018 2

[2080]23517 8

[3180]360174

[4270]480165

[5360]605157

[450]50

245

[960]110244

[2070]235240

[3180]360236

[4290]485228

[5420]6 10221

[940]10 5306

[2050]2303 01

[3160]355297

[4290]485287

[5440]6 15277

[250] [500] [1000] [1000] [2000] [2500] [3000] [3500] [4000] [4500]15 35 70 105 140 170

[8]

30[12 ]

45[16 ]

61[20]

76

245 cm3/r [15.0 in3/r]

[6180]7 00

81[6390]

720141

[6480]730202

[6510 ]735257

205

[430]507

[860]954

[1890]215

1[440]

5030

[9 0 0 ]10 0

29

[1940]22026

[2990]34024

[3960]445

21

[4920]555

17[460]

5061

[940]10 5

60

[2 00 0 ]225

56

[3060]34554

[4080]46048

[5090]57542

[.5]

1,9[2]

7,5[4]

15

[5040]570

11[5680]

64039

[710 0 ]8 0 0

67[7420]

840125

[7490]84518 4

[7580]855238

240

[5930]670

6[6630]

75030

Flo

w L

PM [G

PM] [8020]

90553

[8450]95510 9

275 310

[7570]85512

[920]10 5365

[2020]230361

[3120]355358

[4260]480348

[5400]6 10338

[24]

91

[6490]735316

[870]100426

[1980]225421

[3100]350416

[4240]480404

[5380]610376

[28]

10 6

[6480]730358

[800]90

489

[1920]215481

[3050]345475

[4170]470461

[5290]6 00448

[32]

121

[6410]725423

[730]80

549

[1850]210543

[2980]335537

[4060]460524

[5150]580509

[36]

136

[6300]710482

[690]80

612

[1790]2 00606

[2940]330599

[4010]455585

[5130]580570

[40]

151[1760]

2 00682

[2860]325674

[3960]445658

[5070]575641

[45]

17 0[1720]

19 5758

[2800]315749

[3890]440731

[4920]555712

[50]

18 9

[420]45

307[380]

45368

[330]35

430[290]

35491

[250]30

556

[9020]1020

37

[8520]965

6

[9510 ]1075

92[8480]

960165

[9540]118 0

145[8660]

9802 18

[7590]860294

[7580]855340

[7520]850398

[7440]840456

[8680]980271

[8670]980322

[6190]7 00540

[7100 ]800510

[6080]685608

[5940]670676

[9740]110 0

197

[8640]975373

[6690]7555 74

[570]65

688

[1670]19 0834

[2740]310824

[3820]430804

[4890]550783

[200 ]25

615

[5880]665744

[55]

208

6000 SeriesPerformance Data

Motors run with high efficiency in all areas designated with a number fortorqueandspeed.Forbest motor life select a motortorunwithatorqueand speed range shown in the light shaded area. Performancedataistypicalat 120 SUS. Actual data may vary slightly from unit to unit in production.

Continuous

Intermittent

Peak

NoOperation


[810 ]9077

[1650]18 5

76

[3370]38074

[5080]57572

[6740]76 0

68

[8430]95065

[800]90

11 5

[1620]18 511 5

[3390]385112

[5130]58010 9

[6810]77010 5

[8520]96510 0

[750]85

154

[16 00]180154

[3380]380151

[5120]580147

[6820]770143

[8560]965132

[1580]18 019 3

[3360]38018 9

[5120]58018 7

[6840]77518 2

[8590]970175

[250]15

[5 0 0 ]35

[100 0 ]70

[15 0 0 ]10 5

[2 00 0 ]14 0

[25 0 0 ]17 0

[8]

30[12 ]

45[16 ]

61[20]

76

390 cm3/r [23.9 in3/r]

[10 050]113 5

55[10190]

115091

[10230]115 5

126[10280]

116 0162

[3 00 0 ]205

[760 ]85

4

[1570]17 5

2

[3230]365

1[780]

9019

[1610]18 0

18

[3270]37017

[4910]55516

[6440]73014

[7760]87512

[800 ]9038

[1640 ]18 5

38

[3300]375

37

[4970]560

35

[6570]74 0

33

[8160]92029

[1]

3,8[2]

7,5[4]

15

[9080]1025

9[9570]1080

22[11620]

131545

[11860]1340

81[11920]

1345116

[11980]1355152

[35 0 0 ]240

[10590]119 5

4[11270]

127514

Flo

w L

PM [G

PM] [12880]

145533

[13640]1540

79

[4 00 0 ]275

[12120]1370

5

[1520]17 0230

[3280]370229

[5060]570225

[6780]76 5220

[8530]965212

[24]

91

[10240]115 5

204[1460]

16 5268

[3210]365266

[5000]565261

[6730]760256

[8480]960248

[28]

10 6

[10200]115 0

236[1420]

16 0306

[3140]355304

[4930]555299

[6640]750292

[8380]945282

[32]

121

[10120]114 5

269[1370]

15 5346

[3010]340340

[4840]545336

[6500]730329

[8250]930317

[36]

136

[10000]113 0

3 01[1320]

15 0386

[2880]325380

[4740]535375

[6460]730368

[8120]915359

[40]

151

[2650]300475

[4540]515469

[6440]730460

[8050]910449

[50]

18 9[2460]

280570

[4430]500562

[6360]720552

[7860]890538

[60]

227

[680]75

19 3[620]

70232

[570]65

270[530]

60309

[450]50

348[380]

45387

[14480]1635

21

[14490]1635

1

[1140]130482

[45 0 0 ]3 10

[560]6596

[1250]14 0

95

[2650]300

91

[3970]45087

[5280]595

81

[6480]73073

[570]65

144

[1260]140143

[2690]305140

[4050]460135

[5420]610129

[6730]760121

[540]60

193

[1230]140192

[2660]300188

[4060]46018 4

[5450]615178

[6800]770167

[1200]13 5241

[2630]295236

[4040]455232

[5450]615226

[6820]770216

[250]15

[500]35

[1000 ]70

[1500]10 5

[2000 ]140

[2500]170

[8]

30[12 ]

45[16 ]

61[20]

76

310 cm3/r [19.0 in3/r]

[7710]87064

[8040]910111

[8150]920156

[8190]925201

[3000]205

[530]606

[1120]125

4

[2440]275

1[540]

6024

[1150]13 0

23

[2460]280

22

[3620]4 10

20

[4780]540

17

[5690]64514

[550]6048

[1180]135

47

[2560]290

45

[3800]43042

[5030]57038

[6050]68532

[.5]

1,9[2]

7,5[4]

15

[6670]75510

[7070]800

24[8740]

98555

[9260]1045

99[9400]1060

141[9520]1075

184

[3500]240

[7780]880

4[8260]

93517

Flo

w L

PM [G

PM] [9770]

110 546

[10490]118 5

88

[4000]275

[9070]1025

10

[1160]130289

[260]295282

[4020]455279

[5440]615273

[6840]775260

[24]

91

[8230]930248

[1130]130336

[2570]290333

[3990]450328

[5420]610320

[6820]770308

[28]

10 6

[8220]930295

[1100]125384

[2510]285381

[3920]445375

[5330]6 00368

[6750]765354

[32]

121

[8170]920341

[1060]120430

[2440]275421

[3830]435416

[5220]5904 10

[6660]750396

[36]

136

[8100]915383

[1020]115478

[2400]270466

[3780]425461

[5150]580456

[6580]745441

[40]

151

[2180]245582

[3420]385576

[4660]525570

[6050]685551

[50]

18 9[1960]

220698

[3250]365691

[4540]515684

[5750]650661

[60]

227

[510]60

242[480]

55290

[420]45

339[360]

40388

[300]35

436[270]

30485

[10990]1240

35

[9530]1075

3

[982]110597

[4500]310

[118 00]1335

76[10660]

1205126

[11990]1355

109[10840]

1225167

[9560]1080232

[9520]1075

276[9440]

1065320

[9330]1055360

[10900]1230215

[10840]1225257

[8020]905427

[9220]1040403

[7440]840534

[7080]800641


}[5750]650661



Continuous

Intermittent

Peak

NoOperation


C-5

[1020]11560

[2090]23560

[4290]48559

[6490]73557

[8620]97554

[10740]1215

51[1000]

11591

[2080]23591

[4290]48589

[6500]73587

[8650]97584

[10800]1220

79[110]960122

[2060]235122

[4260]480121

[6480]730118

[8650]975114

[10820]122010 9

[1980]225152

[4180]470150

[6420]725147

[8620]975144

[10820]1220139

[250]15

[500]35

[1000]70

[1500]10 5

[2000]14 0

[2500]170

[8]

30[12 ]

45[16 ]

61[20]

76

490 cm3/r [30.0 in3/r]

[12800 ]1445

45[12890]

145571

[12900]1460100

[3000]205

[1010]115

7

[1200]235

7

[4260]480

5[1020]

11515

[2110]24014

[4270]48013

[6280]71012

[8350]945

11

[10420]117 5

8[1030]

11530

[2100 ]23530

[4280]48529

[6410 ]72528

[8500]96027

[10590]119 5

25

[1]

3,8[2]

7,5[4]

15

[12140]1370

3[12500]

141021

[14930]1685

38

[3500]240

[14580]1645

17

Flo

w L

PM [G

PM]

[4000]275

[16670]1885

12

[1930]22018 4

[4150]47018 1

[6390]72018 0

[8580]970176

[10770]1215171

[24]

91[1840]

210214

[4070]4602 11

[6290]710208

[8500]960204

[10720]1210198

[28]

10 6[1710]

195244

[3970]450241

[6190]700237

[8420]950232

[10660]1205226

[32]

121[1560]

175275

[3860]435272

[6080]685265

[8340]940260

[10420]1175255

[36]

136[14 00]

16 0306

[3750]425303

[5970]675295

[8140]920290

[10180]115 0284

[40]

151

[3240]365379

[5220]590369

[7620]860362

[50]

18 9[2860]

325454

[4860]550442

[7140]805435

[60]

227

[900]100153

[850]95

184[740]

85215

[690]80

245[670]

75276

[570]65

307

[1140]130382

[6140]695

3

[1195]135

45

[2600]29545

[5350]60544

[8195]92542

[1200]13 5

72

[2600]29572

[5390]61071

[8145]92068

[1120]12594

[2530]28594

[5340]60592

[8105]915

89[2465]

280119

[5285]595117

[8080]915115

[250]15

[500]35

[1000]70

[1500]105

[8]

30[12 ]

45[16 ]

61[20]

76

625 cm3/r [38.0 in3/r]

[1060]120

5

[2205]250

5

[4515 ]510

4

[6690]755

2[1090]

12512

[2300]260

12

[4720]53513

[7025]79510

[1145]13 024

[2450]27524

[5052]57024

[7520]850

21

[1]

3,8[2]

7,5[4]

15[11220]

127037

[11770]1330

64[11740]

132585

[11725]1325

110

[2000]140

[9360]1060

6[9410]1065

16

Flo

w L

PM [G

PM] [13100]

148035

[13000]1469

60[13000]

146983

[2500]170

[12700]1434

13

[15700]1774

56

[3000]205

[15800]1785

32

[3200]221

[16800]1898

30

[2365]265143

[5180]585140

[7990]905138

[24]

91

[11705]1320

132[2255]

255168

[5080]575165

[7915]895162

[28]

10 6

[11640]1315

156[2140]

24019 2

[4960]56018 8

[7775]880185

[32]

121

[11505]13 00

179[1965]

220216

[4780]540213

[7585]8552 10

[36]

136[1790]

2 00240

[4600]520238

[7395]835236

[40]

151

[4180]470296

[6985]790290

[50]

18 9[3800]

430353

[6600]745345

[60]

227

[1050]120120

[950]105144

[855]95

169[730]

8019 3

[555]65

217[380]

45241

Torque [lb-in ] NmSpeed RPM

}[2860]325454



Continuous

Intermittent

Peak

NoOperation


735 cm 3/r [45.0 in 3/r]

Flo

w L

PM

[GPM

] [1290]14640

[2889]32639

[4540]51338

[6130]69338

[7703]870

37 [1277]

14461

[2821]3 19

60

[4528]51259

[6180]69858

[7795]88157

[1196]13 582

[2753]31180

[4478]50679

[6148]69578

[7768]87877

[2794]316101

[4320]488101

[6021]68099

[7697]870

97

[250]15

[500 ]35

[750]50

[1000]70

[1250]85

[1500]105

[8]

30[12 ]

45[16 ]

61[20]

76

[10666]1205

35[10877]

122954

[10984]1241

74[10907]

123293

[1750]120

[1311]14 8

4

[2775]314

4

[4200]475

3[1340]

15110

[2856]323

10

[4535]51210

[5809]65610

[7551]853

9 7[1253]

14 220

[2854]322

20

[4363]49319

[5813]65718

[7272]82217

[1]

3,8[2]

7,5[4]

15

[10182]115 0

6[10135]

114 514

[12192]1378

33[12419]

140352

[2000]140

[11121]1257

5[11537]

130313

[13713]1549

32

[2250]15 5

[12970]1465

11

[2500]170

[15040]1699

11

[2556]289122

[4162]470120

[5871]663119

[7564]855118

[24]

91[2338]

264142

[4040]456141

[5666]640139

[7365]832137

[9202]1040

37 [9338]1055

56[9376]1059

76[9311]1052

96

[8685]981

[8714]98516

[9289]1049

116[9022]

1019135

[8828]997156

[28]

10 6[2110]

238162

[3795]429162

[5457]6 17159

[7122]805159

[32]

121[1845]

20818 3

[3517]39718 2

[5223]59018 1

[6853]774179

[36]

136[2227]

252202

[3270]369202

[4965]5612 01

[6672]75419 9

[40]

151

[3869]437254

[4148]469252

[5850]661250

[50]

18 9[4856]

549303

[6604]74 6301

[60]

227

[1092]12310 2

[1206]13 6123

[1083]122145

[950]10 7163

[726]82

18 4[515]

58203

[5480]619

3

[7000]791

2

805 cm 3/r [49.0 in 3/r]

Flo

w L

PM

[GPM

] [1599]18135

[3473]39235

[5415]612

34

[7039]79533

[8934]1009

32

[10629]1201

31[1599]

18156

[3469]39256

[5415]61255

[7093]8 01

53

[9024]1020

53

[10658]1204

52[1543]

17473

[3395]38473

[5357]60572

[7032]79470

[8983]10 15

69

[10640]1202

68[3312]

3 7492

[5292]598

91

[6968]78789

[8943]1010

88

[10583]119 6

87

[250]15

[500]35

[750]50

[1000]70

[1250]85

[1500]105

[8]

30[12 ]

45[16 ]

61[20]

76

[11842]1338

29[12283]

138850

[12010]1357

67[12146]

137286

[1750]120

[1455]164

4

[3100]350

4

[4680]529

2[1483]

16 89

[3173]359

9

[5121]579

9

[6432]727

8

[8510]961

7

[9633]1088

6[1547]

17519

[3331]37619

[5292]59818

[6744]762

17

[8714]98416

[10075]1138

15

[1]

3,8[2]

7,5[4]

15

[11319 ]1279

5[11352]

128314

[14004]1582

29[13726]

155150

[2000]140

[12127]1370

5[12539]

141712

[15441]174 5

28

[2250]15 5

[14564]1645

11

[2500]170

[16377]1850

10

[3183]360112

[5088]575111

[6811]76 9110

[8812]996108

[10411]117610 6

[24]

91[3055]

345131

[5047]570131

[6713]758129

[8681]981128

[10411]1176127

[10060]113 7144

[28]

10 6[2907]

328149

[4884]552149

[6546]740146

[8395]949145

[32]

121[2692]

304168

[4663]527168

[6320]714167

[8118]9 17165

[36]

136[2477]

28018 6

[4426]5 0018 6

[6085]68818 5

[7832]885184

[40]

151

[4214]4 76233

[5849]661231

[7603]859230

[50]

18 9[3806]

430280

[5459]617277

[7407]837275

[60]

227

[1457]16 5

93[1352]

15 311 2

[1213 ]137131

[1075]121150

[823]93

168[592]

67187

[2730]308234

[6031]681

2

[7799]881

1


}[6604]746301



Peak

NoOperation

Continuous

Intermittent


C-5



[2030]23030

[4400]49530

[6630]75030

[8790]99529

[10940]1235

28

[13090]1480

27[2020]

23045

[4390]49545

[6630]75045

[8860]1000

44

[11050]1250

43

[13240]1495

42[2010]

22561

[4320]490

61

[6560]740

61

[8790]995

60

[11000]1245

59

[13260]1500

58[4220]

47577

[6480]73076

[8720]985

76

[10950]1235

75

[13160]1485

74

[250]15

[500]35

[750]50

[1000]70

[1250]85

[1500]10 5

[8]

30[12 ]

45[16 ]

61[20]

76

D Pressure Bar [PSI]985 cm3/r [60.0 in3/r]

[14500]1640

26[15040]

170041

[1750]120

[1890]215

3

[4110]465

3

[5730]645

2[1910]

2158

[4 140]470

8

[6270]710

7

[8300]940

7

[10420]1175

6

[12500]1410

5[1980]

22515

[4290]485

15

[6480]77515

[8540]96514

[10670]1205

14

[12800]1445

13

[1]

3,8[2]

7,5[4]

15

[13860]1565

4[13900]

157013

[16580]1875

25

[2000]140

[14920]1685

3[15850]

179012

Flo

w L

PM [G

PM]

[4060]46092

[6230]70592

[8500]960

91

[10790]1220

90

[12990]1470

89

[24]

91[3920]

44510 7

[6180]700107

[8420]95010 6

[10630]1200

10 5

[12820]1450

103

[28]

10 6[3740]

425123

[5980]675122

[8200]925121

[10280]116 0

120

[32]

121[3490]

395138

[5710]645138

[7930]895137

[9940]1125

135

[36]

136[3240]

365153

[5420]6 10152

[7640]865151

[9590]1085

150

[40]

151

[5160]58519 0

[7350]83018 9

[9310]1050

188

[50]

18 9[4660]

525230

[7160]810229

[9070]1025226

[60]

227

[1910]21 5

77[1810]

20592

[1620]18 510 7

[1480]165123

[1140]13 0138

[850]95

153

[2960]325191

[7640]865

2

[9550]1080

1


}[7160]8 10229

Continuous

Intermittent

Peak

NoOperation


Port B

XY Max.

Case DrainPort

114,5[4.508]Square

146,8 [5.78]Square Max.

161,9 [6.375]Dia. Bolt Circle

14,53/14,14[.572/.557]Dia. Thru (4)

147,4 [5.80] Max.

13,59/12,8[.535/.505]

24,6/24,1[.97/.95]

127,00/126,87[5.000/4.995] DIa.

6000 SeriesDimensionsStandard Mount

Ports 1 5/16 -12UN-2BSAEO-ringStaggeredPorts(2) 7/16 -20UNF-2BSAEO-ringCaseDrainPort(1)or4Bolt3/4 inchSplitFlangePorts(2) 7/16 -20UNF-2BSAEO-ringCaseDrainPort(1)orG 1 (BSP)StaggeredPorts(2) G 1/4 (BSP)CaseDrainPort(1)or1 5/16UN-2BSAEO-ringStaggeredPorts(2)withShuttle 9/16 -20UNF-2BSAEO-ringCaseDrainPort(1)

Standard Rotation Viewed from Shaft EndPortAPressurized—CW PortBPressurized—CCW

Standard Mount

Standard Sae CC flange

StanDarD Motor Mount DiMenSionS

Displacement X Y cm3/r [in3/r] mm [inch] mm [inch]195 [11.9] 187,5 [ 7.38] 270,0 [10.63]245 [15.0] 193,0 [ 7.60] 275,6 [10.85]310 [19.0] 200,4 [ 7.89] 283,0 [11.14]390 [23.9] 209,0 [ 8.23] 291,6 [11.48]490 [30.0] 220,2 [ 8.67] 302,8 [11.92]625 [38.0] 235,0 [ 9.25] 317,5 [12.50]985 [60.0] 274,6 [10.81] 357,1 [14.06]


C-5

Port BX

Y Max.

Case DrainPort

17,3/16,8[.68/.66]7,74

[.305] Min.

22,6/22,1[.89/.87]

98,6/97,0[3.88/3.82] 139,70/139,57

[5.500/5.495] Dia.

127,00/126,87[5.000/4.995] Dia.

14,53/14,14[.572/.557] Thru (4)

166,4 [6.55]Square Max.


130,21[5.126]Max.

6000 SeriesDimensionsWheelMount

Wheel Mount Motor DiMenSionS

Displacement X Y cm3/r [in3/r] mm [inch] mm [inch]195 [11.9] 102,6 [4.04] 185,2 [7.29]245 [15.0] 108,2 [4.26] 190,8 [7.51]310 [19.0] 115,6 [4.55] 198,1 [7.80]390 [23.9] 124,5 [4.90] 207,1 [8.15]490 [30.0] 135,4 [5.33] 217,9 [8.58]625 [38.0] 150,1 [5.91] 232,7 [9.16]985 [60.0] 189,7 [7.47] 272,5 [10.73]


Standard Rotation Viewed from Shaft EndPortAPressurized—CW PortBPressurized—CCWWheel Mount


53,49/52,70[2.106/2.075]

14,000/13,957[.5512/.5495]

8,992/8,890[.3540/.3500]

141,43[5.568](4)

179,6 [7.07] Max.

179,6[7.07]Max.

M12 x 1,7525,0 [.98] Min.Depth

50,000/49,974[1.9685/1.9675]

8,4/4,6[.33/.18]

124,5/120,4[4.90/4.74]

70,26/69,75[2.766/2.746]

79,2 [3.12]Max. CouplingLength

Case DrainPort

Port B

XY Max.

20,3/19,8[.80/.78]

38,7/37,7

159,99/159,94[6.299/6.297]Pilot Dia.

[1.525/1.485]

18,21/17,83[.717/.702]Dia. Thru (4)


6000 SeriesDimensionsGlobalMount(ISO)

gloBal Mount Motor DiMenSionS

Displacement X Y cm3/r [in3/r] mm [inch] mm [inch]310 [19.0] 182,4 [ 7.18] 264,9 [10.43]390 [24.0] 191,0 [ 7.52] 273,6 [10.77]490 [30.0] 202,2 [ 7.96] 284,7 [11.21]625 [38.0] 216,9 [ 8.54] 299,5 [11.79]800 [45.0] 229,4 [ 9.03] 312,2 [12.29]800 [49.0] 236,7 [ 9.32] 319,3 [12.57]985 [60.0] 256,5 [10.10] 339,1 [13.35]

50 mm Dia. Straight Shaft


Standard Rotation Viewed from Shaft EndPortAPressurized—CW PortBPressurized—CCWglobal Mount (iSo)


C-5

Mating Coupling BlankEaton Part No. 12778-002

J

H

F

G

ED

C

Case DrainPort

Note: Similar toSAE C TypeMounting Flange

45º

Port BX

Y Max.

127,00/126,87[5.000/4.995]Dia.

12,7/12,1[.50/.48]24,2/21,0

[.95/.83]

Face Seal or O-ring Seal

114,5[4.508]Square

147,6 [5.81] Max. Square Case Flow Holes (2)

14.50/14,14[.572/.557]

161,9 [6.375] Dia. Bolt Circle

Mating Coupling BlankEaton Part No. 12778-002

J

H

F

G

ED

C

Case DrainPort

Note: Similar toSAE C TypeMounting Flange

45º

Port BX

Y Max.

127,00/126,87[5.000/4.995]Dia.

12,7/12,1[.50/.48]24,2/21,0

[.95/.83]

Face Seal or O-ring Seal

114,5[4.508]Square

147,6 [5.81] Max. Square Case Flow Holes (2)

14.50/14,14[.572/.557]

161,9 [6.375] Dia. Bolt Circle

6000 SeriesDimensionsBearlingless

For6000bearinglessmotor application information, contact your Eaton representative (mating couplingblanksavailablefromEaton Hydraulics).

Note: Aftermachiningblank,partmust be hardened per Eaton specification.

C 47,2 [1.86] Dia. D 111,5 [4.39] Max. E 106,4 [4.19] Full Form Dia. F 6,9 [ .27] Min. Full Form Dia. G 10,2 [ .40] Min. H 86,1 [3.39] Max. J 66,5 [2.62] Dia.

BearingleSS Motor DiMenSionS

Displacement X Y cm3/r [in3/r] mm [inch] mm [inch]195 [11.9] 105,4 [4.15] 188,0 [7.40] 245 [15.0] 111,0 [4.37] 193,5 [7.62] 310 [19.0] 118,4 [4.66] 200,9 [7.91] 390 [23.9] 127,3 [5.01] 209,6 [8.25] 490 [30.0] 138,2 [5.44] 220,7 [8.69] 625 [38.0] 152,9 [6.02] 235,5 [9.27] 985 [60.0] 192,8 [7.59] 275,1 [10.83]


Standard Rotation Viewed from Shaft EndPortAPressurized—CW PortBPressurized—CCWBearingless


Circular

Major

MinorTip R .

Fillet R.Pitch

Form

Finish

Finish

2

3

4

6

5

81,8/80,7[3.22/3.18]

1,5/0,8 [.06/.03]

-D-0,13[.005] A

30°15°

40,1/39,6 [1.58/1.56] Dia.

49,848/49,8221.9625/1.9615

1,8/0,5 [.07/.02]

1,5/0,5 [.06/.02]

14,2/12,7[.56/.50]

9,4/8,4[.37/.33]69,3/68,1[2.73/.2.68]Coupling Depth

R 0,5 [.02] Max.

-A-

16

-B-

5,1/4,6 [.20/.18] Dia.(2) Thru Oil Hole24,6/24,1

[.97/.95]6,8/6,4[.27/.25]

52,37 [2.062] Dia. Min.

R 1,8/1,2 [.07/.05]

0,13 [.005] A

Case Flow

Case Flow

6000 SeriesInstallation InformationBearingless

1 Internal spline in mating part to be as follows: Material to be ASTM A304, 8620H. Carbonize to a hardness of 60-64 HRc with case depth (to 50HRc) of 0,076 - 1,02 [.030 - .040] (dimensions apply after heat treat).

2 Mating part to have critical dimensions as shown. Oil holes must be provided and open for proper oil circulation.

3 Seal to be furnished with motor for proper oil circulation thru splines.

4 Some means of maintaining clearance between shaft and mounting flange must be provided.

5 Similar to SAE “C” Four Bolt Flange..6 Counterbore designed to adapt to a

standard sleeve bearing 50,010 - 50,038 [1.9689 - 1.9700] ID by 60,051 - 60,079 [2.3642 - 2.3653] O.D. (Oilite bronze sleeve bearing).

Spline Pitch ................................................................................................ 8.5/17Pressure Angle ...............................................................................................30°Number of teeth .............................................................................................. 12Class of Fit .................................................................................................. Ref. 5Type of Fit ..................................................................................................... SidePitch Diameter ....................Ref. 35,858823 [1.4117647] | 0,20 [.008] | DBase Diameter ....................................................... Ref. 31,054652 [1.2226241]Major Diameter ...................................39,17 [1.542] Max. 38,97 [1.534] Min..Min. Minor Diameter ........................................... 33,30 - 33,48 [1.311 - 1.318]Form Diameter, Min. ......................................................................38,33 [1.509]Fillet Radius ................................................................... 0,64 - 0,76 [.025 - .030]Tip Radius ...................................................................... 0,25 - 0,51 [.010 - .020]Finish .........................................................................................................1,6 (63)Involute Profile Variation ..................................+0,000 -0,025 [+.0000 -.0010]Total Index Variation .....................................................................0,038 [.0015]Lead Variation ................................................................................0,013 [.0005]Circular Space Width: Maximum Actual .....................................................................5,898 [.2322] Minimum Effective ..................................................................5,804 [.2285] Maximum Effective .........................................................Ref. 5,857 [.2306] Minimum Actual ..............................................................Ref. 5,834 [.2297]Dimension Between Two Pins...........Ref. 26,929 - 27,084 [1.0602 - 1.0663]Pin Diameter ..........................................6,223 [.2450] Pins to Have 4,0 [.160] Wide Flat for Root Clearance


C-5

Recommended Torque :(645 Nm [475 lb-ft] Dry)(510 Nm [375 lb-ft] Lub)Plus Torque required t oalign the slotted nut withthe Shaft Crosshole.

Hub

60,17/57,78[2.369/2.275]

11,2 [.44]55,4 [2.18]

15,7 [.62]30º

4,1 [.16]

1-1/4-18 UNEF-2B

9,2/4,5 [.36/.18]

63,7/62,2[2.51/2.45]

75,6 [2.98]Max. Coupling40,018/39,992

[1.5755/1.5745]

M12 x 1,75 -6H25 mm [.984] Deep

43,03/42,72[1.694/1.682]

12,000/11,957[.4724/.4708]

40,3 [1.59]Min. Full Spline

56,7[2.23]Max. Coupling

38,10 [1.500]Dia. Ref.

3/8-16 UNC x 18,5 [.73] Deep

9,56/9,52[.376/.375]

42,40/42,13[1.669/1.659]

38,10/38,04[1.500/1.498]Dia.

[2.23]56,7

Max. Coupling

42,0/40,6[1.65/1.60]

44.45[1.750] Dia.

4,1 [.16]Dia. Thru

77,0 [3.03]

5,54/5,20[.218/.205]

11,138/11,112[.4385/.4375]

31,7 [1.25]

3/8-16 UNC x 18,5 [.73] Deep

External InvoluteSpline, 12.24 DP17 Tooth 30 P.A.Flat Root Side Fitper ANSI B92.1, 1976

1-1/4-18 UNEF-2A

30º

SAE J501 Standard Tapered Shaf t125,00 0,17 Taper per Mete r[1.500±.002 Taper per Foot]

1328 [11750]Max. TorqueNm [lb-in]




8,000/7,910[.3149/.3115]

78,2/76,2 [3.08/3.00] End of Shaft to Mounting Surface (Std)

177,8/175,0 [7.00/6.89] End of Shaft to Mounting Surface (Whl)




Hub

60,17/57,78[2.369/2.275]

11,2 [.44]55,4 [2.18]

15,7 [.62]30º

4,1 [.16]

1-1/4-18 UNEF-2B

9,2/4,5 [.36/.18]

63,7/62,2[2.51/2.45]

75,6 [2.98]Max. Coupling40,018/39,992

[1.5755/1.5745]

M12 x 1,75 -6H25 mm [.984] Deep

43,03/42,72[1.694/1.682]

12,000/11,957[.4724/.4708]



38,10 [1.500]Dia. Ref.

3/8-16 UNC x 18,5 [.73] Deep

9,56/9,52[.376/.375]

42,40/42,13[1.669/1.659]

38,10/38,04[1.500/1.498]Dia.

[2.23]56,7

Max. Coupling

42,0/40,6[1.65/1.60]

44.45[1.750] Dia.

4,1 [.16]Dia. Thru

77,0 [3.03]

5,54/5,20[.218/.205]

11,138/11,112[.4385/.4375]

31,7 [1.25]

3/8-16 UNC x 18,5 [.73] Deep


1-1/4-18 UNEF-2A

30º






8,000/7,910[.3149/.3115]





1 1/2 inch Straight

1 1/2 inch 17 tooth Splined

6000 SeriesDimensionsShafts Splined

40 mm Straight

1 3/4 inch tapered

tapered Shaft hub Data

Slotted hexagon nut


Hub

60,17/57,78[2.369/2.275]

11,2 [.44]55,4 [2.18]

15,7 [.62]30º

4,1 [.16]

1-1/4-18 UNEF-2B

9,2/4,5 [.36/.18]

63,7/62,2[2.51/2.45]

75,6 [2.98]Max. Coupling40,018/39,992

[1.5755/1.5745]

M12 x 1,75 -6H25 mm [.984] Deep

43,03/42,72[1.694/1.682]

12,000/11,957[.4724/.4708]



38,10 [1.500]Dia. Ref.

3/8-16 UNC x 18,5 [.73] Deep

9,56/9,52[.376/.375]

42,40/42,13[1.669/1.659]

38,10/38,04[1.500/1.498]Dia.

[2.23]56,7

Max. Coupling

42,0/40,6[1.65/1.60]

44.45[1.750] Dia.

4,1 [.16]Dia. Thru

77,0 [3.03]

5,54/5,20[.218/.205]

11,138/11,112[.4385/.4375]

31,7 [1.25]

3/8-16 UNC x 18,5 [.73] Deep


1-1/4-18 UNEF-2A

30º






8,000/7,910[.3149/.3115]






6000 SeriesShaft Side Load Capacity

kg

[10000]

0

[ 2000]

[ 4000]

[ 6000]

[ 8000]

0

1000

2000

3000

4000

[lb]

kg

[10000]

0

[ 2000]

[ 4000]

[ 6000]

[ 8000]

0

1000

2000

3000

4000

[lb]

0

0 [1][-1] [2][-2] [3][-3] [4][-4][inch]

20-20 40-40 60-60 80-80 100-100mm

160

[6] [7][5] [8][4][3][2][1]0[-1][inch]

180140 200120100804020 600-20mm

Wheel Motor Tapered Shaft

Standard MotorStraight and Splined Shafts

Mounting Surface

Mounting Surface

Thesecurvesindicatetheradial load capacity on the motor shaft(s) at various locations with an external thrustloadof454kg [1000lb].Themaximumallowable thrust load is 908kg[2000lb].

Note: Case pressure will increase the allowable inward thrust load and decrease the allowable outward thrust load. Case pressure will push outward on the shaft at109kg/7Bar[241lb/100PSI].Each curve is based on

B 10 bearing life (2000 hours of 12,000,000 shaft revolutions at 100 RPM) at rated output torque. Todetermineradialloadatspeedsotherthan100RPM,multiply the load values given on the bearing curve by the factors in the chart below.

RPM Multiplication Factor50 1.23 100 1.00 200 0.81 300 0.72 400 0.66 500 0.62 600 0.58 700 0.56 800 0.54

For3,000,000shaftrevolu-tionsor500hours–Increasethese shaft loads 52%.

Thrust Load

Max. Axial Loads908 kg [2000 lb]


C-5

6000 SeriesCase Pressure and Case Port

Char-Lynn 6000 Series motors are durable and have long life as long as the recommended case pressure is not exceeded. Allowable case pressure is highest at low shaft speeds. Consequently,motorlifewill be shortened if case pressure exceeds these ratings (acceptability may vary with application). Determine if an external casedrainisrequiredfromthe case pressure seal limitation chart.

Case Porting AdvantageContamination Control—flushing the motor case.Cooler Motor—exitingoildraws motor heat away.Extend Motor Seal Life—maintain low case pressure with a preset restriction in the case drain line.

0 500

Speed RPM

[ 500]

[1000]

0

Intermittent --Case DrainOptionalContinuous --Case DrainOptional

CasePressureBar[PSI]

Case DrainRequired

400300200100 600 700 800 9000

50

100

0

Case Pressure Seal Limitation


Port A

Port B

58,0/56,3[2.28/2.22]

35,9/34,7[1.414/1.366]

13,8/10,6[.54/.42]

7/16-20 UNF O-ring orG 1/4 (BSP) Port Case Drain

20,7/17,4[.80/.70]

47,63[1.875]

23,9 [.94]

45°

54,9 [2.16]

22,23 [.875]11,2 [.44]Port A

Port B

44,2/39,6[1.74/1.56]

7/16-20 UNF O-ringPort Case Drain

19,4/18,7 [.765/.735]

17°

Ports to Fit SAE J518c (2) Except for 20,0 [.79] Min. Thd. Dp.

13,8/10,6[.54/.42]

65,8[2.59]Max.

81,8[3.22]Max.

77,0[3.03]Max.

77,7[3.06]Max.

65,8[2.59]Max.

19,4/18,7[.765/.735]

35,9/34,7[1.414/1.366]

4,4/3,0[.17/.12]

9/16-18 UNF O-ring

Port A

Port B

58,0/56,3[2.28/2.22]

17°

65,8[2.59]Max.

93,7[3.69]Max.

66,0[2.60]Max.

79,5[3.13]Max.

20,1 [.79] Max.

19,4/18,7[.765/.735]

19,4/18,7[.765/.735]

6000 SeriesDimensionsPorts

4 Bolt 3/4 inch Split flange1 5/16 -12 o-ring Ports (2) or g 1 (BSP) Ports (2)

1 5/16 -12 o-ring Ports (2) with Shuttle

Port A

Port B

58,0/56,3[2.28/2.22]

35,9/34,7[1.414/1.366]

13,8/10,6[.54/.42]

7/16-20 UNF O-ring orG 1/4 (BSP) Port Case Drain

20,7/17,4[.80/.70]

47,63[1.875]

23,9 [.94]

45°

54,9 [2.16]

22,23 [.875]11,2 [.44]Port A

Port B

44,2/39,6[1.74/1.56]

7/16-20 UNF O-ringPort Case Drain

19,4/18,7 [.765/.735]

17°

Ports to Fit SAE J518c (2) Except for 20,0 [.79] Min. Thd. Dp.

13,8/10,6[.54/.42]

65,8[2.59]Max.

81,8[3.22]Max.

77,0[3.03]Max.

77,7[3.06]Max.

65,8[2.59]Max.

19,4/18,7[.765/.735]

35,9/34,7[1.414/1.366]

4,4/3,0[.17/.12]

9/16-18 UNF O-ring

Port A

Port B

58,0/56,3[2.28/2.22]

17°

65,8[2.59]Max.

93,7[3.69]Max.

66,0[2.60]Max.

79,5[3.13]Max.

20,1 [.79] Max.

19,4/18,7[.765/.735]

19,4/18,7[.765/.735]


C-5

Mounting Shaft Port Size DiSPl. cm3/ r [in3/ r] / ProDuCt nuMBer

310 390 490 625 735 805 985 [19.0] [23.9] [30.0] [38.0] [45.0] [49.0] [60.0]

Standard 50 mm Straight G 1 (BSP) 112-1217 -1218 -1215 -1216 -1247 -1219 -1220

Mounting Shaft Port Size DiSPl. cm3/ r [in3/ r] / ProDuCt nuMBer

195 245 310 390 490 625 735* 805* 985 [11.9] [ 15.0] [19.0] [23.9] [30.0] [38.0] [45.0] [49.0] [60.0]

1 1/2 inch Straight 1 5/16 O-ring 112-1064 -1065 -1066 -1067 -1068 -1107 -1145 — -1069

40 mm Straight G 1 (BSP) 112-1094 -1095 -1096 -1097 -1098 — — — -1099

1 5/16 O-ring 112-1058 -1059 -1060 -1061 -1062 -1109 1163 — -1063

G 1 (BSP) 112-1088 -1089 -1090 -1091 -1092 — — — -1093

40 mm Straight G 1 (BSP) 113-1082 -1083 -1084 -1085 -1086 -1100 — — -1087

1-3/4 Inch Tapered 1 5/16 O-ring 113-1070 -1071 -1072 -1073 -1074 -1093 — — -1075

1 5/16 O-ring 114-1031 -1032 -1033 -1034 -1035 -1055 — — -1036

G 1 (BSP) 114-1043 -1044 -1045 -1046 -1047 — — — -1048

*New release

6000 SeriesProduct Numbers

114-1047

Standard

Bearingless

WheelMotor

Usedigitprefix— 112-,113-,or114-plusfourdigit number from charts for completeproductnumber—Example 114-1047.Orders will not be accepted without three digit prefix.

1 1/2 Inch17 T Splined

Note: For6000SeriesMotorswitha configuration Not Shown in the charts above: Use model code number system on the next page to specify product in detail.

112-1215

Mounting Type - Standard (Code H), 4 Bolt:

• 160,0[6.30]PilotDia.

• 18,01[.709]Dia.MountingHoles

• 200,0[7.87]Dia.BoltCircleOutputShaft-Straight(Code21)Ports-G1(BSP)StaggeredG1/4CaseDrain(CodeC)Paint-LowGlossBlack(CodeA)

Usedigitprefix— 112- plus four digit number from charts for complete productnumber— Example 112-1215.Orders will not be accepted without three digit prefix.


6000 SeriesModel Code

1 ProductM – Motor

2 , 3 Series06 – 6000 Series

4 , 5 , 6 Displacement cm3/r [in3/r]120 – 195.8 [11.95]150 – 246.5 [15.04]190 – 312.0 [19.04]239 – 391.7 [23.90]300 – 491.4 [29.99]381 – 624.2 [38.09]450–737.4[45.00]490–803.4[49.03]600 – 982.7 [59.97]

7 , 8 Mounting TypeAA – Bearingless, 4 Bolt: 127,0 [5.00] Pilot Dia. and 14,35 [.565] Dia. Holes 162,0 [6.38] Dia. Bolt CircleAB – Standard, 4 Bolt (SAE CC): 127,0 [5.00] Pilot Dia. and 14,35 [.565] Dia. Holes on 162,0 [6.38] Dia. B.C.AC – Wheel, 4 Bolt 139,7 [5.50] Pilot Dia. and 14,35 [.565] Dia. Holes on 184,2 [7.25] Dia. Bolt CircleAD–Standard,4Bolt,(SAED):152,4[6.00]PilotDia.15.24[.600]Dia.Holeson228.6[9.00]Dia.BoltCircle(SAED)withO-RingGroovetoAcceptARP-163O-RingAH–Standard,4Bolt:10.0[6.30]PilotDia.18,01[.709]Dia.Holeson200.0[7.87]Dia.BoltCircle. AL-Wheel,4Bolt:160.0[6.30]PilotDia.with5.8[.23]PilotLengthand18.00[.709]Dia.Holeson200.0[7.874]BoltCircle(ISOCompatible)

9 , 10 Output Shaft Description

00 – None (Bearingless)01 – 38,10 [1.50) Dia. Straight Shaft with .375-16 UNC-2B Thread in End, 9,52 [.375] Sq x 41,28 [1.625] Straight Key02 – 44,45 [1.75] Dia. .125:1 Tapered Shaft per SAE J501 with 1.25-18 UNEF-2A Threaded Shaft End, 11,11 [.4375] Sq. x 31,8 [1.25] Straight Key03 – 38,10 [1.50] Dia. Flat Root Side Fit, 17 Tooth, 12/24 DP 30 DEG. Involute Spline with .375-16 UNC-2B Thread in end 40,4 [1.59] Minimum Full Spline Length04 – 40,00 [1.575] Dia. Straight Shaft with M12 x 1.75-6H Thread in End, 12W x 8H x 63L [.472W x .313H x 2.480L] Key12– 49,99 [1.968] Dia. Straight Shaft with M12 x 1.75-6H Thread in End, 14W x 9H x 70L [.550W x .354H x 2.756L] Key15–60mmDia.10:1TaperedShaftperISOR775withM42x3-6HThreadedShaftEnd,16Wx10Hx32L[.630Wx.394Hx1.26L]Key16–53,98[2.125]Dia.FlatRootSideFit,16Tooth,8/16DP30Deg.InvoluteSplinewithM12x1.75-6HThreadinEnd,55,9[2.20]MinFullSpline

11 , 12 Port DescriptionAA – 1,3125-12 UN-2B SAE O-Ring Ports–Staggered Ports AB – SAE 19.05 [.750] Dia. 4-Bolt Split Flange - Staggered Ports AC – G 1 Staggered Ports AG – .750-16 UNF-2B SAE O-ring Ports - Staggered

13, 14 Case Flow02 – .4375-20 UNF-2B SAE O-Ring Port With Check Valve 03 – G 1/4 BSP Straight Thread Port with Check Valve 06–.5625-18UNF-2BSAEO-RingPortwithShuttleValve10–.750-16UNF-2BSAEO-ringPorts,ExternalLubricationCircuitRequiresCase Drain must be Connected,.063ShuttleFlowOrifice

15 Low Pressure Relief0 – NoneA–Setat4.5[65lbf/in2]B–Setat15.2[220lbf/in2]

16, 17 Pressure/Flow Option00 – None

18 Geroler Option0 – Standard 2–TightFitting

19 Seal Option0 – Standard1 – Viton 3 – Seal Guard

20, 21 Accessories00 – None

22, 23 Special Features (Hardware)00 – None01 – Non-Masked

Nameplate 02–Non-MaskedNameplate,LowNoiseValvePlate03–LowNoiseValvePlate

24, 25 Special Features (Assembly)00 – NoneAA – Reverse Rotation

26, 27 Paint/Packaging00 – No Paint, Individual

BoxAA – Low Gloss Black

PrimerAD – No Paint, Bulk Box

OptionAE – Low Gloss Black

Primer, Bulk Box Option

28, 29 Customer ID00 – None

30 Design Code

F – Sixth

Thefollowing30-digitcodingsystemhasbeendevelopedtoidentify all of the configuration options for the 6000 Series motor. Use this model code to specify a motor with the desiredfeatures.All30-digitsofthecodemustbepresentwhenordering.Youmaywanttophotocopythematrixbelow to ensure that each number is entered in the correct box.

M 0 6 * * * * * * * * * * * * * 0 0 * * 0 0 * * * * 0 0 F

32 54 6 87 9 10 11 12 13 14 26 27 28 29 301 15 16 17 18 19 20 21 22 23

Feature in bold are preferred and allow for shorter lead time

6000 Series Features - SearchSinger.net · 2017-08-10 · EATON Low Speed High Torque Motors...

Documents

Transcript of 6000 Series Features - SearchSinger.net · 2017-08-10 · EATON Low Speed High Torque Motors...