6 ROUND DIRECT - speclight.com
2
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260 5 YEAR WARRANTY Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products. PROJECT: TYPE: SPC0609INC - CEILING MOUNT APPLICATION 6" Diameter cylinder series for use with incandescent PAR lamps. FEATURES Spectrum Surface Solutions series provides traditional architectural style with high performance energy efficient illumination. Rugged design with flexible mounting, finish and lamping options make these extremely versatile fixtures. FINISH Multi-stage polyester powder-coat process applied on our dedicated paint lines. A wide variety of standard and custom finishes are available. All exposed materials are chromate pretreated to resist corrosion. ELECTRONICS 120 Volt standard. CONSTRUCTION Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide high efficiency illumination. Stainless steel hardware with galvanized steel brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished to specification. LABELS ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598. 6" ROUND DIRECT PAR SERIES EXAMPLE: SPC0609INC/PAR38/6030BL/HM36/MW SERIES LAMP REFLECTOR MOUNTING 1 FINISH 3 SPC0609INC R30 PAR30 PAR38 6030-SG WH BL BB WB Semi-Diffuse Low Iridescent White Finish Black Alzak Finish Black Micro Baffle White Micro Baffle HM 2 PM 2 AT 2 SM WM Hang Straight Rigid Pendant Mount Hang Straight All Thread Surface Mount Wall Mount MW 4 MB 4 PT 4 CC Matte White Matte Black Platinum Silver Custom Color See Page 2 for Full Range of Color Options (83-90095) NOTES: 1 See Mounting Page for Details on Components and Finishes 2 Specify Length in Inches: See Mounting Page for Available Lengths 3 See Color Page for More Options/Consult Factory for Special Finishes 4 Standard Finishes A B 6.0 152.4 mm 9.5 241.3 mm B A 83-00133_RA
Transcript of 6 ROUND DIRECT - speclight.com
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
5YEAR
WARRANTY
Dimensions and values shown are nominal. Spectrum Lighting continually works to improve products and reserves the right to make changes which may alter the performance or appearance of products.
PROJECT:
TYPE:
SPC0609INC - CEILING MOUNT APPLICATION
6" Diameter cylinder series for use with incandescent PAR lamps.
FEATURES
Spectrum Surface Solutions series provides traditional architectural style with high
performance energy efficient illumination. Rugged design with flexible mounting,
finish and lamping options make these extremely versatile fixtures.
FINISH
Multi-stage polyester powder-coat process applied on our dedicated paint lines. A
wide variety of standard and custom finishes are available. All exposed materials are
chromate pretreated to resist corrosion.
ELECTRONICS
120 Volt standard.
CONSTRUCTION
Drawn .040 aluminum fixture housing. Specular primary optical reflectors provide
high efficiency illumination. Stainless steel hardware with galvanized steel
brackets to resist corrosion. Reflector spun .063 high purity aluminum and finished
to specification.
LABELS
ETL/UL/CSA listed for damp locations. Manufactured and built to UL standard No. 1598.
6" ROUND DIRECTPAR SERIES
EXAMPLE: SPC0609INC/PAR38/6030BL/HM36/MW
SERIES LAMP REFLECTOR MOUNTING1 FINISH3
SPC0609INC R30PAR30PAR38
6030-SGWH
BLBB
WB
Semi-Diffuse Low IridescentWhite FinishBlack Alzak FinishBlack Micro BaffleWhite Micro Baffle
HM2
PM2
AT2
SMWM
Hang Straight Rigid Pendant MountHang Straight All ThreadSurface MountWall Mount
MW4
MB4
PT4
CC
Matte WhiteMatte BlackPlatinum SilverCustom Color
See Page 2 for Full Range of Color Options
(83-90095)
NOTES:1 See Mounting Page for Details on Components and Finishes 2 Specify Length in Inches: See Mounting Page for Available Lengths 3 See Color Page for More Options/Consult Factory for Special Finishes 4 Standard Finishes
A B6.0
152.4 mm9.5
241.3 mm
B
A
83-00133_RA
WWW.SPECLIGHT.COM • 994 JEFFERSON STREET, FALL RIVER, MA 02721 • 508.678.2303 FAX 508.678.2260
NOTE: NO PRINTED IMAGE CAN EQUAL THE EXACT COLOR OF FINISH ON METAL. SEE INDIVIDUAL SPECIFICATION SHEETS OR CONSULT FACTORY FOR ADDITIONAL INFORMATION.
COLOR OPTIONS - POWDER COAT PAINT FINISHES
FIXTURE COLOR STANDARD CORD COLOR STANDARD CANOPY / STEM COLOR
Matte White, Textured White Matte White Matte White
Gloss White Matte White Gloss White
Matte Black, Textured Black Matte Black Matte Black
All Others Matte Black Same Color as Fixture
Custom Color Contact Factory Contact Factory
TIER COST AVERAGE PAINT TIME*
Tier 1 - Standard Finishes $
Tier 2 - Typical Finishes $$
Custom Color Contact Factory Contact Factory
STANDARD CORD / STEM / CANOPY FINISHES PAINT TIMES
TIER 1 - STANDARD FINISHESBZBronze
GW Gloss White
TWTextured White
BR Brecchia
SN Sun Gold
GH Graphite
CH Charcoal
AL Almond
MT*Textured Silver
CO Copper Metallic
AS Anodic Sapphire
AN Anodic Natural
AC Anodic Champagne
AZ Anodic Bronze
AK Anodic Black
AM Anodic Malachite
LG Lime Green
BY Burgundy
LB Light Blue
TB Textured Black
OB* Oil Rubbed Bronze
VE Verde Green
RD Red Baron
OR Orange
CM Camel
PLPurple
TQ Turquoise
PG Pub Green
EG Evergreen
AY Aero Yellow
BL Blue Streak
PK Pink
SF Sea Foam
MW Matte White
MB Matte Black
PT Platinum Silver
TIER 2 - TYPICAL FINISHES
*CONTACT FACTORY FOR SPECIFIC PRODUCT LEAD TIMES
CUSTOM COLOR FINISHESCONTACT FACTORY
CCCustom Color
*UNAVAILABLE FOR WET LOCATION
CC
83-90095_RA
